Fluvial Deposits Research Articles

The Boipeba member in the Jatobá Rift (northeastern Brazil): Occurrence, facies characterization and palaeoenvironmental implications

Fluvio-aeolian and lacustrine depositional systems are commonly associated with the initial sedimentary processes in rift-type basins, typically indicative of relatively calm tectonic settings. Fluvio-aeolian sandstones from the Boipeba Member of the Aliança Formation have been documented in well-drilled samples from the Recôncavo and Tucano basins, with thicknesses decreasing progressively from south to north. These units constitute the Brotas Group, encompassing deposits from the Jurassic period (Dom João local Brazilian stage). However, due to the absence of any records within the Jatobá Basin up until now, its occurrence in this basin remains uncertain. Based on facies analysis and depositional architectural elements, the fluvio-aeolian system of the Boipeba Member can be categorized into four associations (1) medium to low energy fluvial channels, (2) floodplains, (3) dunes and (4) sand sheets. Palaeocurrent data have indicated a variable paleoflow direction ranging from SW and NW, which is expected for the rift-onset phase fluvial system. Within the broader context of the Recôncavo-Tucano-Jatobá Rift System (RTJ), five distinct fluvial and/or aeolian units can be identified: the Tacaratu Formation (Syneclisis), the Boipeba Member (the basal unit of the Aliança Formation), the Sergi Formation (Early Rift), the São Sebastião Formation (Rift), and the Marizal Formation (Post-Rift). The Boipeba Member is the first unit of the Early Rift Sequence in the RTJ, deposited in a fluvio-aeolian environment until it evolves to the exclusively lacustrine deposition of the Capianga Member (the upper unit of the Aliança Formation). The subsequent recurrence of the fluvio-aeolian cycle is evident in the Sergi Formation. Faciological and petrographic analyses of outcrops in drainage channels in the Tacaratu municipality, located in the southeastern part of the Jatobá Basin, were performed. The rock formations appear as whitish-gray sandstones, typically thin to medium, subrounded, and consistently sorted. Some samples exhibit clay matrix and contain feldspars. Notably, the presence of planar cross-stratifications and a distinct upper contact with sediments of lacustrine origin provide diagnostic features indicating the Boipeba Member. Based on the facies, depositional system and palaeocurrent analyses, the deposits of the Boipeba Member in the Jatobá Basin were interpreted as resulting from fluvial channel sedimentation, followed by subsequent aeolian reworking. This process transitioned gradually to a lacustrine infilling, exemplified by the Capianga Member. Therefore, the Aliança Formation within the Jatobá Basin signifies the complete deposition of a fluvio-aeolian and lacustrine system, exhibiting both of its members, as observed in the other basins of the RTJ.

Downstream Morphological and Sedimentary Transformations in Modern Continental-Scale Rivers

Morphological characteristics in river systems, including channel dimensions and river gradients, scale to drainage basin area, which provides the means for such elements to be predicted, measured and modeled. Moreover, recent studies interpret downstream changes in channel morphological and sedimentary characteristics to be the product of changing flow hydraulics as rivers transit from the normal flow to the backwater reach and approach the coastal ocean. This paper quantifies how large modern rivers undergo morphological and sedimentary transformations in response to normal flow to backwater transition. Morphologies adapting to such backwater hydraulic conditions is a potential for further investigation. With applications in modeling of modern river systems, this also provides the means for paleoenvironment reconstructions based on changing morphological characteristics since such quantitative framework is grounded by similar depositional processes. Building on previous studies, we construct river-long profiles, estimate backwater lengths, measure the ratio between channel-belt and channel widths (BChB/BCh), and measure the ratio between sand-rich to mud-dominated environments of deposition (S/M ratio) in five large modern river systems. We use results from >55,000 measurements of morphological and lithological characteristics from ~3,850 valley cross-sections over ~5,500 river kilometers to show that: (a) channel gradients decrease by ~30-50% as the channel goes through the normal flow to backwater transition, whereas (b) BChB/BCh decreases by >~60% and (c) S/M ratios decrease by ~35-90% within the upper backwater reach. These values further decrease in the lower backwater reach and approach unity (BChB/BCh = 1; S/M = 0) as the gradient reaches zero (sea level). Such systematic transformations in morphologic and sedimentary characteristics indicate they are both inherent and predictable, and can be used to interpret normal flow vs. backwater hydraulics in ancient fluvial deposits.

Morphological Response of a Highly Engineered Estuary to Altering Channel Depth and Restoring Wetlands

Estuaries are continuously adapting to anthropogenic pressure. Because of sea-level rise and reduced fluvial sediment supply, they are at risk of sediment starvation. Contrarily, some estuaries require frequent dredging after artificially deepening the channel to maintain port operations. To optimize current estuarine functions and make estuaries more resilient to future threats, improved understanding of estuarine development after system changes is essential. This paper investigates the estuarine response related to two large-scale human interventions: (1) altering channel depth, following global trends of channel deepening for port navigability; and (2) creating or restoring wetlands, a nature-based solution increasingly explored for its ecosystem services. A schematized 2D-morphological model is set up using Delft3D-FM reflecting a highly engineered estuary in a micro-tidal and wave-dominant environment. Results demonstrate how channel deepening (from 13 m to 17 m, without wetland presence) increased sedimentation in the channel by +31%. Sedimentation rates in the wetland were mostly unaffected by channel depth. After restoring the wetland area (wetland width from 0 km to 1 km, constant channel depth of 15 m), sedimentation within the channel was reduced by −72%. The wetland area not only served as sediment sink, but also increased the tidal flow, diminishing sedimentation throughout the estuarine channel. Further analysis showed that restoring wetland areas along a specific segment mostly affected channel sedimentation locally (i.e., at the channel segment along the restored wetland). As such, to alleviate dredging operations at critical locations in the navigation channel, strategic restoration of wetlands can be considered which can provide a sustainable alternative to dredging within highly engineered estuaries.

Testing the Feasibility of Usumacinta River Sediments as a Renewable Resource for Landscaping and Agronomy

Fluvial sediment recycling in agronomy is a relatively recent development, as sediment fertilizing potential for crops is unexplored. Freshwater sediments can act as fertilizer and improve the aeration of soils to increase the yield of crops, support vegetation for landscaping, and provide protective cover against erosion. This study focuses on the investigation of the agronomic potential of Usumacinta River sediments. The pH of the sediments is around 8.5, which is slightly alkaline. The organic matter content is low (5.7%). The sodium absorption ratio is 1.2 and the electrical conductivity is low (0.02 mS/cm). These values indicate that sediments are nonsaline, which is essential for the growth of crops and vegetation. The environmental characteristics of sediments show that the heavy metals, polycyclic aromatic hydrocarbon (PAH), and polychlorinated biphenyl (PCB) pollutants in sediments are below the recommended thresholds. In addition, sediments from the Usumacinta River contain minerals such as potassium and iron oxides that are helpful in improving the biological and nutritional characteristics of the soil. Furthermore, the pH, granulometry, mineralogy, organic matter, and carbonate contents of the Usumacinta River sediments are similar to agronomic soils. The Usumacinta River sediment’s potential for agronomy was practically investigated by sowing ryegrass (Lolium perenne) in a greenhouse by using the local climatic conditions and mixing sediments with potting soil. Three soil compositions were used to evaluate the germination and growth of ryegrass. The soil compositions were 100% potting soil (C1), 50% sediments + 50% potting soil (C2), and 100% sediments (C3). The growth rate of ryegrass was evaluated by monitoring the increase in grass height and production of fresh biomass. The germination of ryegrass was similar in all three compositions. The growth of ryegrass and production of fresh biomass were the most significant with 100% potting soil (0.25 kg/m2), somewhat less with sediment mix (0.18 kg·m2), and were the least significant with 100% sediments (0.05 kg/m2). The mixture of potting soil and sediments shows similar growth to 100% potting soil. The ryegrass seed germination, growth, and production of fresh biomass with the mixture of sediments gave encouraging results, and underlined the potential of sediments for soil amendments for agronomy and protective developments, such as limiting riverbank erosion, gardening, and landscaping.

Sequence stratigraphy and petrophysical investigation of fluvial sediments: a case study Nubia Sandstone, Ras Budran Field, Gulf of Suez, Egypt

Sequence stratigraphy and petrophysical investigation of fluvial sediments: a case study Nubia Sandstone, Ras Budran Field, Gulf of Suez, Egypt

Investigating the mineralogical and geochemical composition of fluvial sediments of Watari river system, Kano, Nigeria

A key objective of this research is to conduct a mineralogical and geochemical screening of the fluvial sediments in Watari river. Data collected from this study can be used to further enhance scientific understanding of the fluvial processes in the Watari basin as well as the larger Hadejia-Jama' are basin. The geological data can also be used as input information for the prediction of sedimentation rates in the Watari dam, Kano. An intensive field was conducted to explore thebedforms (sand bars, ripples, and sand filled channel or dunes) of the proximal channel environments, platform geometry and sinuosity.X-ray diffraction (XRD) and X-ray fluorescence (XRF) analyses were used to study the mineralogy and chemical composition of the collected samples, respectively. The Watari river can be considered as braided due to the presence of smaller multi-threaded channels, braid or channel bars. The lithology of exposures observed at the river bank show a series of depositional cycles that comprise mudrocks (light and dark), sandstone, conglomerate and a basal quartzitic gravel deposit. The wacke and sub-litheranite rocks were sourced from mafic and intermediate igneous rocks. The relatively high La and Ce in the mudrocks can be attributed mainly to the adsorption of Ce onto Fe-oxides which are abundant in the fluvial sediments eroded from lateritic soils. From the bivariate plot of Al2O3/SiO2 against Fe2O3+MgO, the sandstone facies fall under the passive continental margin, while the quartzite and conglomerate facies are grouped under the foreland basin, and the light mudrock facies is classified under the continental island arc. In addition, the plot of Al2O3/(CaO + Na2O) against Fe2O3+MgO shows the sandstone and quartzite facies fall under the foreland basin. The relatively high concentration of feldspar and muscovite mica in the siliciclastic facies is indicative of close proximity to parent material, and low degree of weathering and diagenesis. The variability in the mineral composition points toward different cycles of fluvial sedimentation, diverse provenance, and wide range of source materials.The geochemical data further buttresses the variability in provenance, wider geographic area of the sediments or re-deposition and reworking by fluvial actions.

Holocene geomorphological evolution of a sediment-starved coastal embayment in response to sea level change: Insights from the Qing'ao Embayment, southern China

Aiming to gain a better understanding of the response of sediment-starved coastal systems to the climate-driven sea level change, this study examines the Holocene evolution history of Qing'ao Embayment, southern China, as a case study. Results suggest three distinct stages of the evolution history: Stage 1 (8400–6000 cal yr BP) records an initial sedimentation phase associated with the early Holocene marine transgression into the embayment. Stage 2 (6000–3000 cal yr BP) records early sediment deposition under relatively strong hydrodynamic inshore/open-bay environment during early marine regression. Stage 3 (3000 cal yr BP to present) records two substages: Stage 3a relates to the semi-enclosed bay, intertidal and lagoonal salt marsh facies between 3000 and 1300 cal yr BP, and Stage 3b records the final infilling of the embayment into a lagoonal plain. This evolution model suggests that the rates of sea level change and sediment accretion are the two major controlling factors for the Holocene geomorphological evolution of sediment-starving coastal systems.Comparison of the evolution of Qing'ao embayment with sediment-supply rich large-river estuary/deltas reveals unique features in the response to Holocene sea level change of this sediment-starved embayment: During the early Holocene marine transgression, sediment starts to accumulate in the small embayment around 8400 cal yr BP, hundreds of years later than in large river estuaries. During 8400–6000 cal yr BP, sediment accretion rate remains dramatically lower than sea level rise rate, which results in the quick growth of sediment accommodation space during this stage. Around 6000 cal yr BP, though sea level has remained relatively stable and large-river deltas have been growing for about 1000 years, the sediment-starved embayment was still under shallow marine and/or open bay conditions. At 3000 cal yr BP, shoreline started to prograde in sediment-starved embayment, which is about 3000 years later than large river deltas. Finally, agricultural activity started around 1300 cal yr BP in the embayment, thousands of years later than large river deltas. Limited or minimal fluvial sediment supply to the small embayment has constrained the land expansion during the sea level stabilization since mid-Holocene, and the limited living space might result in the much later agricultural activity in such coastal system.Due to the different balances between sea level change and sediment flux, sediment-starved coasts are expected to be under higher risks than large river deltas. However, earlier and more extensive human activities in large river basins have resulted in the reduction of sediment discharge that heighten the risks of large river deltas against future sea level rise. Thus, more attention should be paid to the coastal sediment supply budgets in the context of the background of rising sea level.

Direct evidence indicates that revegetation improves organic carbon limitation in sediment denitrification in a eutrophic headwater river

Fluvial sediments are one of the hotspots for river nitrogen removal and denitrification is usually considered the main process of nitrogen removal. The availability of nitrogen in headwater rivers is often a limiting factor for sediment denitrification. However, with the increase of N load caused by human activities, we hypothesized that carbon sources might become a key factor controlling the denitrification of sediments in headwater rivers. Here, we measured the denitrification rate using the acetylene inhibition technique and related environmental factors, including both water and sediment features, throughout a year in a subtropical eutrophic river (1st-3rd order streams). The results of our Pearson correlation and multiple regression analyses supported our hypothesis. We found that C sources had a higher explanatory power than N sources, and sediment total carbon (STC) had the greatest influence on the denitrification rate among the different C sources, and that water carbon sources directly affected the sediment denitrification rates according to a structural equation model (SEM). A degraded river reach was selected for revegetation as part of our study, and we found that revegetation increased water DOC from 19.47 mg l−1 to 24.45 mg l−1, reduced water NO3−-N from 0.61 mg l−1 to 0.35 mg l−1, and significantly increased the sediment denitrification rates by an average of 176%. Our study provides direct evidence that revegetation improves organic carbon limitation in sediment denitrification in a eutrophic headwater river.

On the use of packing models for the prediction of fluvial sediment porosity

Abstract. Obtaining accurate porosity information of fluvial sediment deposits is helpful and desirable for many tasks of river engineers. Besides direct measurements of single samples and empirical formulas specialized for specific cases, packing models promise efficient predictions due to their theoretical and extensible foundation. The objective of this work is thus to investigate the usability of three such models in order to obtain a suitable porosity prediction method for the challenging case of fluvial sediment packing. There, the complexity originates from wide continuous size distributions, from silt to gravel, and different grain shapes. We use data obtained from extensive numerical packing simulations to determine the required model parameters and to verify the models' accuracy for moderate size ratios. This study reveals systematic deficits in one of the models, which can be attributed to the absence of a built-in mixture packing model. By combining these findings with data from laboratory measurements and extending the model to include cohesive effects, we exemplify that reasonable porosity predictions can be obtained with the Compressible Packing Model for the Rhine river in Germany. Through an additional comparison with data from French rivers, guidelines for a successful prediction in cases with limited prior knowledge of the model parameters are developed. Future model enhancements of the packing models directly, and by incorporating more effects that are known to influence porosity, are expected to improve the predictive performance.

Khangai Intramantle Plume (Mongolia): 3D Model, Impact on Cenozoic Tectonics and Comparative Analysis

The Khangai plume is located beneath Central and Eastern Mongolia and corresponds to the mantle volume with significantly reduced longitudinal wave (P) velocities. The plume was identified as a result of the analysis of the MITP08 volumetric model of variations in P wave velocities, expressed as deviations of these velocities from the mean values for the corresponding depths in percent. Above the plume, the lithospheric mantle is thinned to ~50 km. Particularly low velocities (up to –6%) were found in the sublithospheric mantle down to a depth of 400 km. The main body of the plume is located under the Khangai Highland and spreads north to the edge of the Siberian Platform. The Khentei branch of the plume is identified southeast of the Khentei Highlands. It is connected to the main body of the plume at depths of 800–1000 km. Branches of the plume and its Khentei branch spread to Transbaikalia. The size of the plume decreases with depth, and its deepest part (1250–1300 km) is located under the southern part of the Khangai Highland. On the Earth’s surface, the main body of the Khangai plume corresponds to a Cenozoic uplift up to 3500–4000 m high in the south of the Khangai Highland. From the southeast, the territory of the Khangai plume and its Khentei branch is limited by the Late Cenozoic troughs stretching along the southeastern border of Mongolia. On other sides, the Khangai uplift is limited by a C-shaped belt of depressions, consisting of the southeastern part of the Baikal rift zone, the Tunka and Tuva basins in the north, the Ubsunur Basin and the Great Lakes Basin in the west and the Valley of Lakes in the south. The depressions are filled with lacustrine and fluvial sediments from the Late Oligocene to the Pliocene. In the Quaternary, the Southern and Central basins of Baikal, formed no later than the Early Paleogene, became part of the Baikal rift, and other depressions were involved in the general uplift of the region. The structural paragenesis of the Khangai uplift and surrounding basins is due to the impact of the Khangai plume. Above the plume with its Khentei and Transbaikalian branches, the Cenozoic basaltic volcanism of the plume type occurred, in some places inheriting Cretaceous volcanic manifestations. Plume structural paragenesis is combined with structural paragenesis, derived from the interaction of plates and lithosphere blocks, which is expressed by active faults, but developed synchronously with plume paragenesis. The kinematics of active faults shows that the western and central parts of the region develop under conditions of transpression, and the northeastern part ‒ under conditions of extension and transtension. The Khangai plume is connected at depth with the Tibetan plume, located under the central and eastern parts of Tibet north of the Lhasa block. The Tibetan plume rises from depths of 1400–1600 km and is accompanied by thinning of the lithosphere and rise of the earth’s surface. The Khangai and Tibetan plumes represent a special category of plumes that rise from the upper part of the lower mantle and this differs from the upper mantle plumes and the African and Pacific superplumes, rising from the core-mantle boundary. A connection between the Khangai and Tibet plumes with branches of superplumes is possible, but their independent origin is also admitted.

The effect of depositional environment on sustaining a carbon storage site

One of the most difficult challenges facing planet earth is climate change caused by an increase in the concentration of greenhouse gases. Increased effort is being placed on delineating and characterizing suitable geologic formations that can house these gases. As part of this effort, we studied how the depositional environment would influence the storage of CO2 in the Illinois Basin. Lithofacies of the Mt. Simon Formation within the Illinois Basin were interpreted from the core data available for one of the four wells. The lithofacies interpreted from the core data were correlated with the motifs of the gamma-ray (GR) log in order to synchronize the information. Based on the lithofacies from the core and GR log, the depositional environment was defined. This was further used to establish a stratigraphic correlation across the four wells. Petrophysical analysis was carried out to evaluate the suitability of the rock properties in storing CO2. Structural features such as faults were interpreted on the 3D seismic data to evaluate the sealing capacity of the Mt. Simon Formation. A conceptual model of the depositional environment was developed and integrated with the rock properties using sequential Gaussian simulation. CO2 gas was injected and simulated in the Mt. Simon geologic model to evaluate how the flow would be impacted by the formation's depositional environment over time. Based on the lithofacies interpreted from the geologic core data and GR log, four depositional environments were interpreted — a braided river system, a fluvial deposit, a flood plain/shallow ephemeral environment, and eolian deposits. The structural framework revealed that the lower section of the Mt. Simon Formation is laterally extensive and structurally controlled. This allows CO2 gas to be evenly distributed throughout the formation.

Marsh-induced backwater: the influence of non-fluvial sedimentation on a delta's channel morphology and kinematics

Abstract. We investigate the interaction of fluvial and non-fluvial sedimentation on the channel morphology and kinematics of an experimental river delta. We compare two deltas: one that evolved with a proxy for non-fluvial (“marsh”) sedimentation (treatment experiment) and one that evolved without the proxy (control). We show that the addition of the non-fluvial sediment proxy alters the delta's channel morphology and kinematics. Notably, the flow outside the channels is significantly reduced in the treatment experiment, and the channels are deeper (as a function of radial distance from the source) and longer. We also find that both the control and treatment channels narrow as they approach the shoreline, though the narrowing is more pronounced in the control compared to the treatment. Interestingly, the channel beds in the treatment experiment often exist below sea level in the terrestrial portion of the delta top, creating a ∼ 0.7 m reach of steady, non-uniform backwater flow. However, in the control experiment, the channel beds generally exist at or above relative sea level, creating channel movement resembling morphodynamic backwater kinematics and topographic flow expansions. Differences between channel and far-field aggradation produce a longer channel in-filling timescale for the treatment compared to the control, suggesting that the channel avulsions triggered by a peak in channel sedimentation occur less frequently in the treatment experiment. Despite this difference, the basin-wide timescale of lateral channel mobility remains similar. Ultimately, non-fluvial sedimentation on the delta top plays a key role in the channel morphology and kinematics of an experimental river delta, producing channels which are more analogous to channels in global river deltas and which cannot be produced solely by increasing cohesion in an experimental river delta.

Global mapping of river sediment bars

AbstractRecently, deep learning has been increasingly applied to global mapping of land‐use and land‐cover classes. However, very few studies have addressed the problem of separating lakes from rivers, and to our knowledge, none have addressed the issue of mapping fluvial sediment bars. We present the first global scale inventory of fluvial gravel bars. Our workflow is based on a state‐of‐the‐art fully convolutional neural network which is applied to Sentinel‐2 imagery at a resolution of 10 m. We use Google Earth Engine to access these data for a study site that covers 89% of the Earth's surface. We count 8.9 million gravel bars with an estimated area of 41 000 km2. Crucially, the workflow we present can be executed within a month of highly automated processing and thus allows for global scale, monthly, monitoring of gravel bars and associated rivers.

Soil distribution and soil properties in the subalpine region of Kazbegi, Greater Caucasus, Georgia: Physicochemical properties, distribution and genesis

Due to their characteristic properties, mountain soils require adequate management if used for cropping or grazing, even if climatic conditions are favorable. This study provides a summary of a three-year field campaign that evaluated mountain soils in in northern Georgia for sustainable agricultural use. Soils in the Kazbegi study area, located on the northern slope of the Great Caucasian Ridge, were mapped in 2014 and 2015. The soils developed mainly on sediment fans and on glacial and fluvial sediments. They were characterized by a low to moderate yield potential, with high-yield soils found on volcanic plateaus. Despite the high diversity of terrestrial and semi-terrestrial soils, common to all of them was a high humus content. In the river valleys, Fluvisols (or at least soils with fluvic-properties) were widespread and in the valley depressions fens, e.g., Histosols, occurred as well. On volcanic substrates, medium to very deep Cambisols or Umbrisols were found, with moderate to good agricultural yield potentials. However, P-sorption, mainly on amorphous Al- and Fe-oxides, could lead to an increased need for fertilization. Cambisols were present on moraine, and primarily Regosols and Cambisols on the clay and silt-rich sedimentary rocks of the Jurassic, including a widely distributed coarse fraction. The cambic horizon was not visually apparent but was clearly detectable analytically. Depending on the slope inclination and exposure, even Leptosols occurred on the slopes and peaks of sedimentary or volcanic rocks. Based on these results, a synthetic soil map merging geological and geodetic data as well as data from field mapping was created to provide an instrument for land use management.

The signature of accumulated permanent uplift, northern Cascadia subduction zone

AbstractUplift of the overriding plate at a subduction zone denotes interseismic strain accumulation, which is subsequently released during a megathrust earthquake. Although most interseismic strain is thought to be released elastically, observations of uplifted coastal regions at subduction zones worldwide indicate that some strain may result in permanent uplift. The Grays Harbor and Willapa Bay (Washington, USA) coastal region of the Cascadia subduction zone hosts flights of marine terraces testifying to late Pleistocene rock uplift. Our new detailed mapping of the marine terraces recognizes nine new units, including estuarine and fluvial sediments. Luminescence dating, relative age based on soil maturity and terrace elevation, and an evaluation of previous ages from fossil shells collectively constrain the probable ages of three estuarine units to sea-level high stands during Marine Isotope Stages 5a, 5c, and 5e. We estimate an average uplift rate of 0.4 ± 0.1 mm/yr for the terraced estuarine units, consistent with other Pleistocene uplift and incision rates in Cascadia. When compared with observed interseismic vertical deformation, these rates suggest that about one-tenth of interseismic strain may become permanent. The values are permissible within the uncertainties of uplift based on regional estimates of interseismic vertical strain rates and of coseismic subsidence.

Mechanisms and Operational Strategies of Multi-Lateral Steam-Assisted Gravity Drainage (SAGD) for Heterogeneous Reservoirs

As the SAGD steam chamber and production performance in heavy oil reservoirs under fluvial sedimentation environment are heavily impacted by reservoir heterogeneity, an innovative strategy was proposed in this study coupling rock dilation and multi-lateral wells in SAGD projects to break the mud barriers and achieve uniform steam chamber growth. True tri-axial experiments and numerical simulation were designed to validate the feasibility of this strategy, based on which the branches of the SAGD well pairs were designed and the operational parameters were optimized for different geologic heterogeneity conditions. The tri-axial experiment results indicate that the rock formations in the heavy oil reservoirs of the F oilfield exhibit significant shear dilation effects under low confinement pressure conditions, with a volumetric dilation capacity of up to 7%. The branches should be deployed in an interleaved manner, with a horizontal displacement of 20 m and a vertical displacement of 6 m. The optimal results are achieved when the branches intersect the interbeds, allowing for enhanced steam chamber conformance and enlarged volume. Dilation zones of 3–8 m can be created above the steam-injection horizontal wells and around the branches in the reservoir during the dilation of SAGD steam chambers. The maximum volume of dilation fluid used for hydraulic dilation is suggested to be less than 2000 m3. This strategy has been validated as being successful in the pilot SAGD well pair in the F oilfield, China, with the SAGD preheating time reduced by 50% and an incremental oil rate of 4.5 tones/day, indicating encouraging potentials in similar heavy oil reservoirs.

Modelling of Sediment Transport and Deposition in Generating River-Mouth Closure: Oum-Errabia River, Morocco

River mouths are dynamic systems that can respond rapidly to both fluxes in fluvial water and sediment discharge and marine energy conditions, notably waves. On semi-arid wave-exposed coasts, the morphosedimentary behaviour of river mouths is particularly sensitive to variations in water discharge, which can be significantly influenced by climate variations, in addition to anthropogenic actions such as the construction of dams for water resource needs. In this climatic setting, an increasingly common consequence of decreasing river water discharge is the more or less prolonged closure of river mouths. Most studies have addressed river-mouth closure using analytical, parametric, numerical, or statistical models. The present study uses output from four numerical models to elucidate the hydrodynamic and sedimentary behaviour of the mouth of the Oum-Errabia River (catchment size: 35,000 km2), which debouches on the Atlantic coast of Morocco. The historical evolution of the river mouth and the impact of human interventions, such as the construction of dams, are discussed. The study also briefly discusses the impact of the recent closure of the river outlet, in response to particularly low water discharge, on the marine ecosystem and water quality. The modelling results covering a one-year simulation in this situation of closure indicate a deposition of 427,400 m3 of sediment in front of the mouth of the Oum-Errabia. Ensuring permanent river-mouth opening and tidal flushing and renewal of this river’s estuarine waters will necessitate costly regular dredging.

Holocene transformation of natural steppe into an agricultural landscape in the Polabí and Pojizeří Lowlands, Czech Republic, based on mollusc evidence

Recent zonal steppes of Eastern Europe and South-West Asia have their origin in the glacial steppe with its specific continental climate. The westernmost edge of the steppe belt in Central Europe has been climatically shifted from a continental course during the Last Glacial to a rather oceanic one during the Holocene. Steppe enclaves could survive only locally in the driest parts of this area, but as we have confirmed, early arrival of Neolithic agriculture played a significant role in their preservation as well. While pollen analyses can provide the main pattern of landscape development, mollusc successions provide more information about landscape details we need for a better understanding of a steppe transformation towards the recent agricultural ecosystems. Based on the study of 18 mollusc successions in two neighbouring lowlands in the chernozems and alluvial areas of Central and North Bohemia, we described a postglacial development of these two climatically different agricultural landscapes. Based on mollusc evidence, we illustrated the impoverishment of forest communities and the continual occurrence of open habitats throughout the forest climatic optimum of the Holocene. Since the Neolithic colonisation, several erosion events were observed in many profiles documented by a lack of preserved fossil molluscs and layer redeposition which are in excellent agreement with the reconstruction of the fluvial sedimentation and vegetation in the Elbe River floodplain and with the continual settlement of this area. Because we have evidence of a fully developed forest fauna in the Eem interglacial from the Polabí lowland we know that the impoverishment of forest communities and the occurrence of open habitats during the interglacial forest climatic optimum is characteristic only of the Holocene.

Hydrogeological characterization of the Silala River catchment

AbstractThis article reviews hydrogeological studies carried out between 2016 and 2018 in the Silala River basin, a catchment shared by Chile and Bolivia. These were conducted in the context of the Case Concerning the Status and Use of the Waters of the Silala River, submitted to the International Court of Justice in 2016, and contributed to multidisciplinary science to demonstrate that this system is an international watercourse. In 2016, the hydrogeological understanding of the Silala River basin was poor. The studies reviewed here filled many knowledge gaps, providing a solid hydrogeological baseline, and establishing new monitoring infrastructure to collect relevant aquifer data. The most important hydrogeological units were identified as the fluvial deposits, alluvial deposits, and the Cabana ignimbrite. The latter is highly heterogeneous, weathered and fractured, and exhibits a high permeability. It is the most important unit in terms of productivity, and is the major regional aquifer providing spring flows to Bolivian wetlands and groundwater flow across the international border. The studies provided a preliminary understanding of the main aquifers in Chile and their properties, which underpinned the development of a robust hydrogeological conceptual model of the system, reviewed elsewhere in this special issue. Subsequent refinements are also summarized. This work confirmed that both surface water and groundwater flows from Bolivia to Chile, and thus confirms the status of the Silala River as an international watercourse and provided the basis for a basin‐scale groundwater numerical model, used to investigate the impact of wetland channelization on surface water/groundwater partitioning.This article is categorized under: Science of Water > Hydrological Processes

Coastal compartments: the role of sediment supply and morphodynamics in a beach management context

Coastal compartments provide a hierarchical framework to manage beaches and coastal ecosystems in Australia. This study examines the individual behaviour of three adjacent beaches within Shoalhaven Bight, a secondary compartment on the south coast of New South Wales (NSW). The Shoalhaven River discharges intermittently into the northernmost of the beaches, and a fluvial component is detectable within beach and foredune sands. The distribution and orientation of headlands constrains dispersal of fluvial sediments, and results in lower wave-energy conditions further south, implying limited sand transport from one beach, or tertiary compartment, to another. Two years of monthly subaerial surveys across ten different profiles and modelled storm-wave conditions during the major storms, were used to compare the response of beach volume and shoreline position. The greatest changes in volume were observed near Shoalhaven Heads and the northern ends of Culburra and Warrain-Currarong beaches. Results indicate the distinct individual response of neighbouring beaches over the two-year period, in contrast to general trends in beach behavior that might be inferred from long-term regional monitoring programs. However, they also demonstrate the limitations of short-term observations in comparison to those longer-term studies. The NSW beach systems of are some of the best understood in the world in terms of regional behaviour, as a consequence of several decades of surveys on key beaches. However, more focused local monitoring programs may be needed to establish detailed coastal sand transport, and an understanding of intermittent delivery of fluvial sand and longshore inputs and outputs, within and between different compartments.