Corrosion testing of UNS N10003 in molten fluoride salt was performed in purified molten 27LiF-BeF2 (66–34 mol%) (FLiBe) salt at 700°C for 1,000 h, in pure nickel and graphite capsules. In the nickel capsule tests, the near-surface region of the alloy exhibited an approximately 200 nm porous structure, an approximately 3.5 μm chromium-depleted region, and MoSi2 precipitates. In the tests performed in graphite capsules, the alloy samples gained weight because of the formation of a variety of Cr3C2, Cr7C3, Mo2C, and Cr23C6 carbide phases on the surface and in the subsurface regions of the alloy. A Cr-depleted region was observed in the near-surface region where Mo thermally diffused toward either the surface or the grain boundary, which induced an approximately 1.4 μm Ni3Fe alloy layer in this region. The carbide-containing layer extended to approximately 7 μm underneath the Ni3Fe layer. The presence of graphite dramatically changes the mechanisms of corrosion attack in UNS N10003 in molten FLiBe salt. In t...