Fluorescence Resonance Energy Transfer Mechanism Research Articles

A hydroxyl-rich covalent organic framework for the precisely selective fluorescence sensing of explosives with high sensitivity

Covalent organic Frameworks (COFs) have become a new platform for functional research and material design. A novel covalent organic skeleton (DHB-TFP COF) was synthesized from 2-hydroxybenzene-1,3,5-tricarbaldehyde and 3,3′-dihydroxybenzidine using Schiff base reaction. DHB-TFP COF is a highly stable porous crystalline material and exhibits exceptional thermal and chemical resistance. DHB-TFP COF exhibited a selective and sensitive “turn-off” fluorescence response to 4-NP in ethanol, and TNP not only significantly quenched the fluorescence of DHB-TFP COF but also caused the obvious red-shift. The fluorescence intensity of DHB-TFP COF exhibited a linear correlation with the concentration of 4-NP with a detection limit of 0.40 μM. Furthermore, the maximum fluorescence peak observed for DHB-TFP COF demonstrated a linear relationship with TNP concentration with a detection limit of 11.15 μM. DHB-TFP COF exhibited satisfactory recovery in the detection of 4-NP and TNP in actual water sample indicating its practical application potential. The O atoms of rich hydroxyl and N atoms of C = N present on the surface of DHB-TFP COF scaffold can establish strong hydrogen bonds with 4-NP and TNP, facilitating their mutual interaction. The spectra studies indicated that the fluorescence quenching mechanism can be attributed to the absorption competitive quenching (ACQ) and fluorescence resonance energy transfer (FRET) mechanism. This study not only proposed the approach for synthesizing novel structured organic frameworks, but also developed a highly selective and sensitive fluorescence chemical sensor for identifying and detecting 4-NP and TNP.

Harnessing fluorescence resonance energy transfer for improved solar still performance with zinc oxide nanoparticles and activated carbon

The Single Slope Corrugated Wick type Solar Distillers (SWS) have attracted significant research funding owing to their simple preparation process and excellent durability against heat and moisture. However, there is a recognized need to enhance their solar energy conversion efficiency. The utilization of ZnO nanoparticles (Z) in SWS is limited by their light absorption capacity, resulting in suboptimal thermal energy conversion and solar energy absorption. In this investigation, we propose an innovative method known as Fluorescence Resonance Energy Transfer (FRET), combining crystallized Z with activated carbon (AC) derived from areca nut shells. This novel approach substantially boosts the thermal efficiency of solar energy utilization in SWS by facilitating efficient energy transfer from ZAC to water.The FRET technique enables the effective transfer of energy from ZAC to water and is comprehensively analyzed. By utilizing Z as donors and AC as acceptors, the photoluminescence emitted by ZAC can be absorbed by both components, thereby increasing the carrier population as of Corrugated Wick-type towards the condenser face within SWS. The evaporation rate from water to the condensing surface is significantly higher in SWS with ZAC compared to conventional wick-type solar stills (CWS), attributed to the efficient heat transfer facilitated through multi-dimensional heterojunctions within ZAC. The energy and charge transfer processes are optimized for both summer and winter operating conditions. The ZAC-based SWS exhibits exceptional resilience in various ambient conditions, resulting in a substantial 33.989 % enhancement in distillation efficiency during summer and a notable 31.199 % improvement in winter. The incorporation of ZAC elevates the production of distillate water to 6.325 liters/m2 per day in summer and 5.840 liters/m2 per day in winter (24 h). The energy distribution among particle components is extensively scrutinized using the FRET mechanism.

Fluorescent Molybdenum Disulfide Quantum Dots for Sensitive Detecting Curcumin in Food Samples through FRET Mechanism.

A selective and sensitive fluorometric assay was developed for specific determination of curcumin (Cur) based on fluorescence resonance energy transfer (FRET) between molybdenum disulfide quantum dots (MoS2 QDs) and Cur. The MoS2 QDs were prepared via a one-step hydrothermal protocol using sodium molybdate dihydrate, L-cysteine (Cys) as precursors, and sodium cholate (SC) as a modification agent. The as-prepared MoS2 QDs possessed maximum fluorescence emission at 460nm with a 20% of fluorescence quantum yield (FQY). It was found that the fluorescence of MoS2 QDs could be quantitatively quenched by Cur through FRET mechanism. Therefore, Cur could be detected in the range of 0.1-20µg mL- 1 with a detection limit of 5 ng mL- 1. Additionally, the developed MoS2 QDs based fluorescent assay has been successfully applied for real food sample analysis with satisfactory results.

A fluorescent MOF and its synthesized MOF@cotton composite: Ratiometric sensing of vitamin B2 and antibiotic drug molecule

Here, we demonstrated the synthesis of a zinc based luminescent MOF, 1 (NDC = 2,6- naphthalenedicarboxylate) for the ratiometric detection of biomarker riboflavin (RBF; vitamin B2) in water dispersed medium. Further, this MOF detected two other antibiotic drug molecules, nitrofurantoin (NFT) and nitrofurazone (NZF). The detection of these analytes is very quick (∼seconds), and the limit of detection (LOD) for RBF, NZF and NFT are calculated as 16.58 ppm, 47.63 ppb and 56.96 ppb, respectively. The detection of these analytes was also comprehended by solid, solution, cost-effective paper strip method i.e., triphasic identification capabilities. The sensor is reusable without losing its detection efficacy. The sensor further showed the recognition abilities of these antibiotics in real field samples (river water, urine and tablet) and RBF in vitamin B2 pills and food samples (milk and cold drinks). The sensing merit of 1 urged us to fabricate of 1@cotton fabric composite, which exhibited the colorimetric detection of these analytes. In-depth experimental analysis suggested that the occurrence of photo-induced electron transfer (PET), fluorescence resonance energy transfer (FRET), and the inner filter effect (IFE) are the possible sensing mechanisms for the recognition of the antibiotics drug. The FRET mechanism is responsible for the recognition of RBF. The sensing mechanism is further supported by the theoretical analysis and the excited lifetime measurement.

Establishment of a graphene quantum dot (GQD) based steroid binding assay for the nuclear progesterone receptor (pgr)

Previously, we established a homogeneous assay for membrane progesterone receptor alpha (mPRα) ligands by conjugating semiconductor nanoparticles known as graphene quantum dots (GQDs) to mPRα. When mixed with a progesterone-BSA-fluorescein isothiocyanate conjugate (P4-BSA-FITC), fluorescence occurred by fluorescence resonance energy transfer (FRET) but was reduced by the ligand-receptor binding activity. The established way showed ligand specificity as mPRα protein. In this study, we tried to establish the same way for nuclear progesterone receptor (Pgr). The ligand-binding domain (LBD) of zebrafish Pgr (zPgrLBD) was expressed as a fusion protein with glutathione S-transferase (GST) (GST-zPgrLBD). The recombinant protein was then purified and coupled with GQDs to produce GQD-conjugated GST-zPgrLBD (GQD-GST-zPgrLBD). When mixed with a P4-BSA-FITC and activated by 370 nm light, fluorescence at 520 nm appeared by FRET mechanism. Fluorescence at 520 nm was reduced by adding free progesterone to the reaction mixture. Reduction of fluorescence was induced by zPgr ligands but not by steroids or chemicals that do not interact with zPgr. The results showed the formation of a complex of GQD-GST-zPgrLBD and P4-BSA-FITC with ligand-receptor binding. The binding of the compounds was further confirmed by a radiolabeled steroid binding assay. A homogenous ligand-binding assay for nuclear progesterone receptor has been established.

Fluorescence/electrochemical dual-mode strategy for Golgi protein 73 detection based on molybdenum disulfide/ferrocene/palladium nanoparticles and nitrogen-doped graphene quantum dots.

Golgi protein 73 (GP73) is a new serum marker associated with early diagnosis and postoperative assessment of hepatocellular carcinoma (HCC). Herein, an electrochemical/fluorescence dual-signal biosensor was designed for determination of GP73 based on molybdenum disulfide/ferrocene/palladium nanoparticles (MoS2-Fc-PdNPs) and nitrogen-doped graphene quantum dots (NGQDs). GP73 aptamer (Apt) was labeled with NGQDs to form the NGQDs-Apt fluorescence probe. MoS2-Fc-PdNPs served not onlyas the fluorescence quencher but also as electrochemical enhancer. The sensing platform (NGQDs-Apt/MoS2-Fc-PdNPs) was formed based on the fluorescence resonance energy transfer (FRET) mechanism. In the presence of GP73, the specific binding of NGQDs-Apt to GP73 interrupted FRET, restoring the fluorescence of NGQDs-Apt at λex/em = 348/438nm and enhancing the oxidation current of Fc in MoS2-Fc-PdNPs at 0.04V through differential pulse voltammetry (DPV). Under the optimal conditions, the DPV current change and fluorescence recovery have a good linear relationship with GP73 concentration from 1.00 to 10.0ng/mL. The calibration equation for the fluorescence mode was Y1 = (0.0213 ± 0.00127)X + (0.0641 ± 0.00448) and LOD was 0.812ng/mL (S/N = 3). The calibration equation of the electrochemical mode was Y2 = (3.41 ± 0.111)X + (1.62 ± 0.731), and LOD of 0.0425ng/mL (S/N = 3). The RSDs of fluorescence mode and electrochemical mode after serum detection were 1.62 to 5.21% and 0.180 to 6.62%, respectively. By combining the electrochemical and fluorescence assay, more comprehensive and valuable information for GP73 was provided. Such dual-mode detection platform shows excellent reproducibility, stability, and selectivity and has great application potential.

Damage-indicating and self-healing anticorrosion coatings based on fluorescence resonance energy transfer and photothermal shape memory mechanism

Self-healing coatings, which possess the ability to repair damage and restore corrosion resistance without significant human intervention, have become a hot topic in corrosion protection research. In this paper, (±)-10-camphorsulfonic acid-doped polyaniline is synthesized and then combined with copolyurethane (copPU) to form the photothermal shape memory composite polymer (CSPA-copPU). An aggregation-induced emission agent, named N’,2-bis[(E)-5-chloro-2-hydroxybenzylidene] hydrazine-1-carbohydrazide, is synthesized and applied to create a synergistic fluorescence system with a prepared chelation-enhanced fluorescence (CHEF) agent, named Rhodamine Benzimidazole. Under the CHEF behavior in response to Fe3+ and the fluorescence resonance energy transfer effect, the system exhibits a strong and sensitive fluorescence response to corrosion-generated Fe3+. Using electrospinning technology, CSPA-copPU@Fl fibers are prepared with CSPA-copPU as the shell and a mixture of fluorescent agents as the core solution and applied to create the composite coatings. The coatings effectively indicate damage in the form of fluorescence, providing guidance for infrared laser repair. CSPA facilitates the passivation of exposed steel. Under irradiation by an infrared laser, the surface temperature reaches the glass transition temperature of copPU and the epoxy binder. Through softening expansion and diffusion entanglement of molecular chains, scratches in the coatings are closed and repaired, and the corrosion resistance is restored to a level of intact coatings.

Excellent ratiometric two-photon fluorescent probes for hydrogen sulfide detection based on the fluorescence resonance energy transfer mechanism.

Fluorescence resonance energy transfer (FRET) is an important mechanism to design ratiometric fluorescent probes that are able to detect analytes quantitatively according to the ratio of two well-resolved emission signals. Two-photon (TP) fluorescent probes can realize the detection in living cells and tissues with deeper penetration depth, higher resolution, and lower photodamage in contrast to one-photon fluorescent probes. However, to date, fabricating TP-FRET ratiometric fluorescent probes possessing large two-photon absorption (TPA), high fluorescence quantum yield and perfect FRET efficiency is still challenging. Consequently, to develop excellent TP-FRET ratiometric probes and explore the relationship between their molecular structures and TP fluorescence properties, in this paper, we designed a series of H2S-detecting TP fluorescent probes employing the FRET mechanism based on an experimental probe BCD. Thereafter, we comprehensively evaluated the TP sensing performance of these probes by means of time-dependent density functional theory and quadratic response theory. Furthermore, we determined energy transfer efficiency and fluorescence quantum yield. Significantly, through regulating benzene-fused positions, we successfully improved fluorescence quantum yield and TPA cross-section simultaneously. Large spectral overlap between energy donor emission and acceptor absorption was achieved and near perfect energy transfer efficiency was acquired for all the studied probes. We revealed that these probes exhibit two well-resolved TPA bands, which are contributed by FRET donors and acceptors, respectively. Especially, both the wavelengths and the cross-sections of the two TPA bands agree well with those of energy donors and acceptors, which is the unique TPA spectral profile of FRET probes and has never been previously reported. Moreover, we proposed an excellent TP-FRET probe BCD3 and its product molecule BCD3-H2S, which exhibit large Stokes (141 nm and 88 nm) and emission shifts (5931 cm-1), as well as greatly increased TP action cross-sections (24-fold and 60-fold) in the near-infrared region with respect to BCD and BCD-H2S. Our detailed study can give an insight into the efficient design of novel TP-FRET fluorescent probes.

Enhanced detection of acrylamide using a versatile solid-state upconversion sensor through spectral and visual analysis

Acrylamide (AM) generally forms in high-temperature processes and has been classified as a potential carcinogen. In this study, we put forward a maneuverable solid-state luminescence sensor using polydimethylsiloxane (PDMS) as the matrix coupled with upconversion nanoparticles as the indicator. The core-shell upconversion nanoparticles emitting cyan light were uniformly encapsulated in PDMS. Then it was further modified with complementary DNA of AM aptamer. The nanocrystalline fluorescein isothiocyanate isomer (FITC), coupled with AM aptamer, was attached to the surface of PDMS. FITC effectively quenched the upconversion luminescence through fluorescence resonance energy transfer (FRET). The introduction of AM resulted in preferentially bound to aptamer caused the separation of the quencher and the donor, and led to luminescence recovery. The developed sensor was applied for both spectral and visual monitoring, demonstrating a detection limit (LOD) of 1.00 nM and 1.07 nM, respectively. Importantly, in the actual foodstuffs detection, there is no obvious difference between the results of this study and the standard method, which indicates the developed method has good accuracy. Therefore, this solid-state sensor has the potential for on-site detection using a smartphone device and an Android application.

Applications of Optical Method As an Effective Platform for Progesterone Sensing Using Carbon Dots and Graphene Oxide

Today, ‘Hormonal imbalance’ is a significant concern worldwide that lead to various types of complications in human body. For instance, abnormal levels of steroid hormones, such as progesterone are associated with irregular or absent menstrual periods, reproductive disorders, infertility, cardiovascular diseases, and cancer. Nowadays, progesterone is being excessively consumed as oral contraceptives, menopausal hormone therapy and treating infertility, resulting into the deleterious effects due to its endocrine disrupting activity. Furthermore, its presence as a potent endocrine disruptor in surface or environmental waters and various daily use products is another concern. Therefore, monitoring progesterone hormone is vital in environmental samples because of the adverse effects on reproductive health and causing hormonal imbalance. Herein, we have developed optical photoluminescence (PL) method implementing carbon dots (CDs) and graphene oxide (GO) based fluorescence resonance energy transfer (FRET) mechanism for progesterone hormone sensing. In this method, firstly progesterone-specific antibodies are covalently functionalized to CDs whose fluorescence has been quenched (turn off) by adding GO. However, the presence of progesterone increases the distance between donor and acceptor moieties and turns-on the fluorescence by displacing GO off the surface of CDs which in turn substantially reduces the FRET efficiency. Various optimization steps have been performed under control experiments to tune the fluorescence of CDs and the concentration of graphene oxide for maximum efficiency. In conclusion, a linear relationship is achieved in between PL intensity and different progesterone concentrations (10-900 nM) with 13.8 nM detection limits (R2=0.974). The structural and morphological analysis (XPS, and FT-IR) revealed the structural and surface functionalities of CDs. Finally, the potential of the developed biosensor has been explored in water matrices.

A fluorescent sensor based on Zn(II)-coodination polymers bearing mixed ligands for the sensitive detection of riboflavine, imidacloprid and nitenpyram

Two new 2D Zn(II) coordination polymers (BAO28 and BAO29), formulated as [Zn(DIN)(HPT)]DMF·2H2O (BAO28) and [Zn(DIN)(HPT)]·2H2O (BAO29) (H2HPT = 5‑hydroxy-isophthalic acid, DIN = 1,4-di(imidazol-1-yl)naphthalene and DMF = N,N-dimethylformamide), were successfully synthesized under solvothermal conditions. Fluorescence analysis showed that BAO28 proceeded with a DIN ligand-based emissive fluorescence. More importantly, the recoverable multi-responsive fluorescent sensor BAO28 was used for fluorescent detection of imidacloprid (IMI), nitenpyram (NTP), and riboflavine (VB2) in a neutral buffer solution with high sensitivity and a low detection limit. Moreover, the sensing of the pesticides by BAO28 was mainly due to the competitive absorption of excitation and emission light by the sensor with that of the pesticides. Furthermore, for the sensing of riboflavine, in addition to the internal filtration effect (IFE) and fluorescence resonance energy transfer (FRET) mechanisms, the sensing mechanism was simultaneously attributed to photoinduced electron transfer.

A portable smartphone-assisted Tb-MOF-based agar-slice probe for the rapid and on-site fluorescence assay of malachite green in aquatic products

In this study, a new Tb-MOF fluorescence probe was developed for the detection of malachite green (MG) in real aquatic products. Fluorescence sensing experiments revealed that MG can effectively quench the green fluorescence of Tb-MOF suspensions, and the detection process exhibits the advantages of high sensitivity, a wide linear range (0–80 μM), a low detection limit (10.8 nM) and a rapid response time. Selective detection of MG is achieved primarily through fluorescence resonance energy transfer (FRET) and photoinduced electron transfer (PET) mechanisms. Furthermore, a smartphone-assisted Tb-MOF-based agar slice detection platform was constructed for the visual and quantitative detection of MG. Additionally, the on-site detection of MG in crucian and shrimp samples was accomplished with high recoveries (99.8 %-107.99 %) and low relative standard deviations (RSD < 2.2 %). This developed detection platform introduced a low-cost, portable and user-friendly approach for MG detection.

Construction of nanohybrid Tb@CDs/GSH-CuNCs as a ratiometric probe to detect phosphate anion based on aggregation-induced emission and FRET mechanism.

The simple preparation of a nanohybrid of terbium-doped carbon dots/glutathione-capped copper nanoclusters (Tb@CDs/GSH-CuNCs) was for the first time developed for ratiometric detection of phosphate anion (Pi). Blue-emission of Tb@CDs can trigger non-luminescence of GSH-CuNCs for aggregation-induced emission (AIE) performance due to the strong reserved coordination capacity of Tb3+. Thus, Tb@CDs/GSH-CuNCs rapidly generated dual-emission signals at 630 nm and 545 nm by directly mixing the two individual materials via the AIE effect, alongside fluorescence resonance energy transfer (FRET) process. However, by the introduction of Pi, both AIE and FRET processes were blocked because of the stronger binding affinity of Tb3+ and Pi than that of Tb3+ and -COOH on Tb@CDs, thus realizing successful ratiometric detection of Pi. The linear concentration range was 0-16 μM, with the limit of detection (LOD) of 0.32 μM. The proposed method provided new ideas for designing nanohybrid of CDs and nanoclusters (MNCs) as ratiometric fluorescent probes for analytical applications.

Ratiometric probe of PQDs/R6G: Achieving high sensitivity and precision in contaminant detection

This paper discusses the utilization of water stable, biocompatible CsPbBr3 perovskite quantum dots (BPQDs) as donors in combination with Rhodamine 6G (R6G) as acceptors, as ratiometric probe, for detection of pathogens and water contaminants via the fluorescence resonance energy transfer (FRET) mechanism. Biocompatibility of BPQDs was attained through phase engineering using succinic acid (SA) ligand which at appropriate pH provides carboxylic environment on the outer surface, facilitating transfer to aqueous phase. Photoluminescence (PL) studies on ratiometric probe reveal quenching of BPQDs’ emission with a simultaneous enhancement of R6G fluorescence, representing a singlet energy transfer. The probe was successfully validated for ratiometric sensing of a model carcinogen (thioacetamide (TAA)) and a model pathogen (Escherichia coli (E. coli)) and the detection limit achieved was 1.8 CFU/mL for E. coli sensing and 1.5 µM for TAA sensing. Dual emission and its quenching mechanism involved in the detection of aforesaid analytes have been elaborately discussed and elucidated, indicating that quenching mechanisms are different for the two analytes. Our work not only demonstrates an important milestone for the integration of perovskite quantum dot in clinical diagnostics but also as an easy, unique, rapid and accurate E. coli detection technique that is complimentary to the rather complicated high throughput and high-sensitivity approaches that are existing.

Molecular Engineering Design of Enhanced Donor-Acceptor Therapeutic Reagent for Efficient Image-Guided Photodynamic Therapy.

The greatest barrier to the further development and clinical application of tumor image-guided PDT, is the inconsistency between the fluorescence intensity and the singlet oxygen generation yield of the photosensitizer under light excitation. Here, a novel donor-acceptor (D-A) system wa s designed from the point of molecular selection by wrapping a classical porphyrin molecule (H2 TPP) as an acceptor into conjugated polymer (ADS254BE) as a donor through fluorescence resonance energy transfer mechanism, which exhibits bright red emission centered at 650nm (Quantum yield, 0.12), relatively large Stoke shift of 276nm, enhanced singlet oxygen generation rate of 0.73, and excellent photostability. The investigations on distribution and killing effect of nanomaterials in cancer cells revealed that ADS254BE/H2 TPP NPs can accumulate in the cytoplasm for imaging while simultaneously producing a large amount of singlet oxygen to remarkably kill cancer cells, which could be used for real-time image-guided PDT. In the xenograft tumor model, real-time imaging and long-term tracing in tumor tissue with ADS254BE/H2 TPP NPs disclosed that the growth of lung cancer in mice could be effectively inhibited during in-situ imaging. From the standpoint of molecular engineering design, this work provides a feasible strategy for novel D-A systems to improve the development of image-guided PDT. This article is protected by copyright. All rights reserved.

An innovative solid-phase biosensor for rapid on-site detection of N-nitrosodimethylamine incorporating zein film and upconversion nanoparticles

Pickled frequently contains nitrosodimethylamine (NDMA), a mutagenic and carcinogenic substance that is dangerous for the general public's health. This study reports on the fabrication of a fluorescent biosensor using zein film and aptamer functionalized upconversion nanoparticles (UCNPs) for on-site monitoring of NDMA in meat. UCNPs were first prepared followed by aptamer binding and mixing with zein film, which was further conjugated with cDNA of dabcyl modified at 5′. The fluorescence resonance energy transfer (FRET) mechanism between the UCNPs and dabcyl was exploited. The fluorescence signals of the zein film recovered when NDMA was present because it was selectively collected by the particular aptamer and damaged the cDNA structure. The designed functionalized zein film was used for on-site and portable determination of NDMA with a lower limit of detection of 0.017 ng/mL, and possessed a satisfactory recovery ranging from 95.8% to 100.2% with no significant difference compared with the GC–MS method.

Highly sensitive fluorescence detection of nitrofurazone and nitrofurantoin in milk and honey using a hydrostable Cd(Ⅱ) metal-organic framework

A new and water-stable Cd (II) metal-organic framework, namely [Cd(mba)(bpdb)0.5] (MOF 1), was successfully designed and synthesized by a mixed ligand of H2mba and bpdb under solvothermal condition (bpdb = 1,4-bis(3-pyridyl)-2,3-diaza-1,3-butadiene, H2mba = 4-(carboxymethyl)benzoic acid). Single crystal X-ray structural analysis suggests that MOF 1 crystallized in the monoclinic system with the P21/c space group and exhibits a 3D framework based on the infinite [CdO5N] chain. Fluorescence sensing experiments show that MOF 1 can be used as a fluorescence sensor to selectively, sensitively and quickly detect Nitrofurazone (NFZ) and Nitrofurantoin (NFT) antibiotics with very low detection limits of 0.116 μM and 0.123 μM, respectively. More importantly, MOF 1 was able to detect the NFT and NFZ antibiotics in milk and honey samples with good recovery rates. Additionally, the possible fluorescent quenching reasons for NFZ and NFT antibiotics were mainly caused by the fluorescence resonance energy transfer (FRET) and photoelectron electron transfer (PET) mechanism.

A novel fluorescent strategy for Golgi protein 73 determination based on aptamer/nitrogen-doped graphene quantum dots/molybdenum disulfide @ reduced graphene oxide nanosheets.

The effective detection of biomarkers associated with hepatocellular carcinoma (HCC) is of great importance. Golgi protein 73 (GP73), a serum biomarker of HCC, has better diagnostic value than Alpha-fetoprotein (AFP) has been reported. In this paper, highly accurate fluorescence sensing platform for detecting GP73 was constructed based on fluorescence resonance energy transfer (FRET), in which nitrogen-doped graphene quantum dots (NGQDs) labelling with GP73 aptamer (GP73Apt) was used as fluorescence probe, and molybdenum disulfide @ reduced graphene oxide (MoS2@RGO) nanosheets was used as fluorescent receptors. MoS2@RGO nanosheets can quench the fluorescence of NGQDs-GP73Apt owing to FRET mechanisms. In the presence of GP73, the NGQDs-GP73Apt specifically bound with GP73 to from the deployable structures, making NGQDs-GP73Apt far away from MoS2@RGO nanosheets, blocking the FRET process, resulting in fluorescence recovery of NGQDs-GP73Apt. Under optimal conditions, the recovery intensity of fluorescence in the detection system is linearly related to the concentration of GP73 in the range of 5ng/mL - 100ng/mL and the limit of detection is 4.54ng/mL (S/N=3). Moreover, detection of GP73 was performed in human serum samples with good recovery (97.21-100.83%). This platform provides a feasible method for the early diagnosis of HCC, and can be easily extended to the detection of other biomarkers.

Insights into the Strong Emission Enhancement of Molecular Rotor Thioflavin T in Aqueous Cellulose Nanocrystal Dispersion: White Light Generation in Protein and Micellar Media.

Thioflavin t (THT) is a well-known molecular rotor extensively used to detect amyloid-like structures. But THT shows very weak emission in water. In this article, we have found that THT shows very strong emission in the presence of cellulose nanocrystals (CNCs). Steady-state and time-resolved emission techniques have been used to study the strong emission of THT in aqueous CNC dispersion. The time-resolved study showed that in the presence of CNCs, the lifetime increased by ∼1500 fold compared to pure water (<1 ps). To know the nature of interaction and also the reason for this increase in emission zeta potential, stimuli-dependent and temperature-dependent studies have been carried out. These studies proposed that electrostatic interaction is the main factor for this binding of THT with CNCs. Further, the addition of another anionic lipophilic dye, merocyanine 540 (MC540), with CNCs-THT in both BSA protein (CIE: 0.33, 0.32) and TX-100 micellar (4.5 mM) (CIE: 0.32, 0.30) solutions produced excellent white light emission. Lifetime decay and absorption studies proposed a possible fluorescence resonance energy transfer mechanism in this generation of white light emission.

Rapid ultrasensitive detection of methamphetamine based on the FRET mechanism between apta-nanobiosensor based on CdTe/ZnS quantum dots and DNA-conjugated Cy3 fluorophore: Forensic biological fluids

A novel Apta- nano biosensor (ANB) based on CdTe/ZnS QDs were designed and applied for ultrasensitive determination of methamphetamine (MA) as one most addictive psychoactive substance at 1 min. Different steps of ANB formation and MA detection were reported by fluorescence spectra. In short, in the first step, the water-soluble ANB was prepared by the ligand-exchange method using the replacement of thioglycolic acid (TGA) and glutathione (GSH) molecules at the surface of QDs with thiolated MA aptamer. This phenomenon increases QDs' fluorescence intensity. In the second step, the optimal amount of DNA-conjugated Cy3 fluorophore was gradually added to obtain the mixture. Based on the fluorescence resonance energy transfer (FRET) mechanism, energy transfer from QDs to Cy3 fluorophore led to the quenching of QDs and turning on the fluorophore. Finally, by titrating different amounts of MA into this system, the thiolated labeled aptamer tends to attach to the target (MA). The Cy3 fluorophore is separated from the QD surface, which leads to the quenching of QDs and fluorophore. This quenching of the ANB could be performed based on a kind of photo-induced electron transfer (PET) mechanism. The detection limit of MA is 4.15 ± 1.08 × 10−12 mol L−1 with a dynamic range from 1.38 ± 0.75 × 10−11 to 99.98 ± 1.03 × 10−8 mol L−1. ANB was applied to determining MA in forensic biological fluids and the obtained results were evaluated with LC-MS-MS with satisfactory results.