Fluorescent Labeling Research Articles

KineWheel-DeepLabCut Automated Paw Annotation Using Alternating Stroboscopic UV and White Light Illumination.

Uncovering the relationships between neural circuits, behavior, and neural dysfunction may require rodent pose tracking. While open-source toolkits such as DeepLabCut have revolutionized markerless pose estimation using deep neural networks, the training process still requires human intervention for annotating key points of interest in video data. To further reduce human labor for neural network training, we developed a method that automatically generates annotated image datasets of rodent paw placement in a laboratory setting. It uses invisible but fluorescent markers that become temporarily visible under UV light. Through stroboscopic alternating illumination, adjacent video frames taken at 720 Hz are either UV or white light illuminated. After color filtering the UV-exposed video frames, the UV markings are identified and the paw locations are deterministically mapped. This paw information is then transferred to automatically annotate paw positions in the next white light-exposed frame that is later used for training the neural network. We demonstrate the effectiveness of our method using a KineWheel-DeepLabCut setup for the markerless tracking of the four paws of a harness-fixed mouse running on top of the transparent wheel with mirror. Our automated approach, made available open-source, achieves high-quality position annotations and significantly reduces the need for human involvement in the neural network training process, paving the way for more efficient and streamlined rodent pose tracking in neuroscience research.

Fabrication of co-delivery liposomal formulation incorporating carmustine and cabazitaxel displays improved cytotoxic potential and induced apoptosis in ovarian cancer cells

Ovarian cancer is the primary cause of death from cancer in female patients. The existing treatments for ovarian cancer are restricted and ineffective in achieving a cure for the disease. To address this issue, we provide a novel approach to treating ovarian cancer by utilizing a liposomal carrier that effectively delivers the chemotherapeutic drugs carmustine (BCNU) and cabazitaxel (CTX). Initially, the combined impact of BCNU and CTX was confirmed, revealing that this impact reaches its maximum at a ratio of 1:2 mol/mol (BCNU/CTX). After that, the BC-Lipo co-delivery system was developed, which has a high capability for loading drugs (97.48% ± 1.14 for BCNU, 86.29% ± 3.03 for CTX). This system also has a sustained release profile and a beneficial long-circulating feature. The accumulation of BC-Lipo in tumors was dramatically enhanced compared to the accumulation of the free drug. Furthermore, BC-Lipo demonstrated similar levels of cytotoxicity to free BCNU and CTX (BCNU/CTX) when tested on HeLa cells in an in vitro model. Biochemical staining methods investigated the cancer cell’s morphological examination. The apoptosis was confirmed by FITC-Annexin-V/PI staining by flow cytometry analysis. In addition, the investigation of fluorescence and protein markers examined the apoptosis mechanistic pathway, and the results indicated that BC-Lipo induced apoptosis due to mitochondrial membrane potential variation. This proof-of-concept study has established the probability of these BCNU-CTX combined treatments as active drug delivery nanocarriers for poorly soluble BCNU and CTX.

Multimaterial 3D Laser Printing of Cell-Adhesive and Cell-Repellent Hydrogels.

Here, a straightforward method is reported for manufacturing 3D microstructured cell-adhesive and cell-repellent multimaterials using two-photon laser printing. Compared to existing strategies, this approach offers bottom-up molecular control, high customizability, and rapid and precise 3D fabrication. The printable cell-adhesive polyethylene glycol (PEG) based material includes an Arg-Gly-Asp (RGD) containing peptide synthesized through solid-phase peptide synthesis, allowing for precise control of the peptide design. Remarkably, minimal amounts of RGD peptide (<0.1wt%) suffice for imparting cell-adhesiveness, while maintaining identical mechanical properties in the 3D printed microstructures to those of the cell-repellent, PEG-based material. Fluorescent labeling of the RGD peptide facilitates visualization of its presence in cell-adhesive areas. To demonstrate the broad applicability of the system, the fabrication of cell-adhesive 2.5D and 3D structures is shown, fostering the adhesion of fibroblast cells within these architectures. Thus, this approach allows for the printing of high-resolution, true 3D structures suitable for diverse applications, including cellular studies in complex environments.

Periodontal Ligament Cell Apoptosis Activates Lepr+ Osteoprogenitors in Orthodontics

Alveolar bone (AB) remodeling, including formation and absorption, is the foundation of orthodontic tooth movement (OTM). However, the sources and mechanisms underlying new bone formation remain unclear. Therefore, we aimed to understand the potential mechanism of bone formation during OTM, focusing on the leptin receptor+ (Lepr+) osteogenitors and periodontal ligament cells (PDLCs). We demonstrated that Lepr+ cells activated by force-induced PDLC apoptosis served as distinct osteoprogenitors during orthodontic bone regeneration. We investigated bone formation both in vivo and in vitro. Single-cell RNA sequencing analysis and lineage tracing demonstrated that Lepr represents a subcluster of stem cells that are activated and differentiate into osteoblasts during OTM. Targeted ablation of Lepr+ cells in a mouse model disrupted orthodontic force–guided bone regeneration. Furthermore, apoptosis and sequential fluorescent labeling assays revealed that the apoptosis of PDLCs preceded new bone deposition. We found that PDL stem cell–derived apoptotic vesicles activated Lepr+ cells in vitro. Following apoptosis inhibition, orthodontic force–activated osteoprogenitors and osteogenesis were significantly downregulated. Notably, we found that bone formation occurred on the compression side during OTM; this has been first reported here. To conclude, we found a potential mechanism of bone formation during OTM that may provide new insights into AB regeneration.

M1 macrophages as promising agents for cell therapy of endometriosis

Endometriosis is a chronic estrogen-dependent disease characterized by the presence of endometrial glands and stroma outside their normal anatomical location. While laparoscopic removal of foci remains the gold standard therapy, it has limited efficacy and certain risks. However, cell therapy using pro-inflammatory M1 macrophages presents a promising and minimally invasive alternative for treating endometriosis. This approach showcases the potential for innovative and effective treatments for this condition. This study aims to explore the anti-endometriosis properties of M1 macrophages. A reproducible syngeneic mouse model of endometriosis was utilized, revealing that formed foci are primarily composed of macrophages with an anti-inflammatory M2 phenotype rather than M1 macrophages. To investigate further, chemically reprogrammed M1 macrophages were labeled with the membrane fluorescent tag PKH26 and administered to animals with endometriosis. Therapy resulted in a decrease in the number and size of foci, accompanied by a shift in the phenotypic composition of peritoneal macrophages. Specifically, the content of M2 macrophages decreased while that of M1 macrophages increased, resembling the composition of healthy animals. Our study conclusively demonstrates the anti-endometriosis properties of M1 macrophages, providing a strong foundation for future research in the cell therapy of endometriosis.

Micron-scale topographies affect phagocytosis of bacterial cells on polydimethylsiloxane surfaces

Many medical devices implanted in patients to mitigate diseases and medical conditions have different types of topographic features. While appropriate textures can promote the integration of host cells and reduce scar tissue formation, some textured implants with inappropriate topographies have been associated with inflammation, bacterial colonization, or even malignant complications. To better understand how surface topography affects host immune response to colonizing bacteria, a protocol was developed to investigate phagocytosis of bacterial cells attached on polydimethylsiloxane (PDMS) surfaces with different square-shaped recessive patterns. The interaction between activated RAW 264.7 macrophages and Escherichia coli in recessive wells was visualized in 3D using multiple fluorescent markers. The results revealed that there is a threshold dimension of topography, below which phagocytosis of attached bacterial cells is significantly impeded. Specifically, under our experimental condition, up to 100-fold reduction in phagocytosis was observed in square-shaped patterns with 5 µm side length and 10 µm depth compared to the flat control and patterns with 10 µm or longer side length. The spacing between wells also showed significant effects; e.g., phagocytosis in the wells further decreased when spacing increased to 50 µm. These results are helpful for understanding how undesired topographies may contribute to bacterial colonization and thus infection and other associated complications. Statement of significanceSurface topography plays an important role in bacteria-material infections and thus the safety of implantable medical devices. Undesired topographic features can cause biofilm formation and related complications. However, how surface topography affects the capability of host immune cells to clear colonizing bacteria is not well understood. In this study, the interaction between macrophage RAW264.7 and colonizing E. coli cells on polydimethylsiloxane (PDMS) with recessive features is investigated. It was discovered that the size of recessive features and the spacing between these features have significant effects on phagocytosis of bacteria by macrophages. These new results are helpful for understanding the complex interaction among host cells, bacteria, and implanted biomaterials, which will help guide the rational design of safer medical devices.

IMSIS: An instrumented microphysiological system with integrated sensors for monitoring cellular metabolic activities

Well plates are widely used in biological experiments, particularly in pharmaceutical sciences and cell biology. Its popularity stems from its versatility to support a variety of fluorescent markers for high throughput monitoring of cellular activities. However, using fluorescent markers in traditional well plates has its own challenges, namely, they can be potentially toxic to cells, and thus, may perturb their biological functions; and it is difficult to monitor multiple analytes concurrently and in real-time inside each well. This paper presents a fully instrumented microphysiological system with integrated sensors (IMSIS) with a similar well format. Each well in the microphysiological system has a set of sensors for monitoring multiple metabolic analytes in real-time. The IMSIS platform is supported by integrated bioelectronic circuits and a graphical user interface for easy user configuration and monitoring. The system has integrated microfluidics to maintain its microphysiological environment within each well. The IMSIS platform currently incorporates O2, H2O2, and pH sensors inside each well, allowing up to six wells to perform concurrent measurements in real-time. Furthermore, the architecture is scalable to achieve an even higher level of throughput. The miniaturized design ensures portability, suitable for small offices and field applications.The IMSIS platform was successfully used to monitor in real-time the mitochondrial functions of live bovine embryos in O2 consumption, H2O2 release as an indication of ROS production, and extracellular acidity changes before and after the introduction of external substrates.

Utilizing quantitative phase microscopy to localize fluorescence in three dimensions via the transport of intensity equation.

We demonstrate the use of a novel, to the best of our knowledge, localization algorithm for digitally refocusing fluorescence images from a three-dimensional cell culture. Simultaneous phase and fluorescence intensity images are collected through a multimodal system that combines digital holography via quantitative phase microscopy (QPM) and fluorescence microscopy. Defocused fluorescence images are localized to a specific z-plane within the three-dimensional (3D) matrix using the transport of intensity equation (TIE) and depth-resolved information derived from the QPM measurements. This technique is applied to cells stained with different fluorescent tags suspended in 3D collagen hydrogel cultures. Experimental findings demonstrate the localization of defocused images, facilitating the analysis and comparison of cells within the hydrogel matrix. This method holds promise for comprehensive cellular imaging of fluorescence labeling in three-dimensional environments, enabling detailed investigations into cellular behavior and interactions.

Immunophenotyping of a population of cultured human umbilical cord cells from Wharton's jelly

BACKGROUND: Against the background of many existing methods of defect replacement in post-traumatic injuries the methods of repair of damaged tissues based on methods using products of tissue engineering and cultures of artificially cultured human cells are becoming more and more widespread in medical practice. The literature reports weak immunogenic activity of human umbilical cord tissues, which makes these cells promising components of regenerative medicine products. Due to possible errors in explant selection and cell transformation in the process of cultivation, it is necessary to reliably determine the phenotype of cells obtained as a result of tissue explantation and their further cultivation. Thus, the specificity of obtaining multipotent mesenchymal cells from human umbilical cord Warton's stool tissues requires reliable identification of the type of the obtained cells. AIM: To obtain reliable features of mesenchymal stem cells in the cell population obtained from human umbilical cord stool tissue. MATERIAL AND METHODS: Methods of cell cultivation, flow cytofluorimetry, immunocytochemistry for determination of surface and intracellular markers of mesenchymal stem cells were used in the study. RESULTS: In the course of work on the identification of cells of the population obtained by culturing explants from human umbilical cord Wharton stool, the heterogeneity of the type of cells constituting the cell population was established. Most of them are mesenchymal stem cells carrying fluorescent markers CD45, CD73, CD34, CD29, CD90, CD44, CD105, which agrees with the immunophenotype of mesenchymal stem cells defined by the International Society for Cell Therapy. The ratio of the applied markers allows us to refer the population of cells obtained by direct explantation of Varton's gelatin tissue fragments to mesenchymal stem cells. Visual control confirmed the localisation of labelled antibodies on the surface of cultured cells. And also, it was shown that there were no vascular muscle cells in the obtained culture. CONCLUSION: As a result of experiments on identification of the cells obtained during explantation of Wharton's jelly tissue fragments and their further cultivation, their belonging to mesenchymal stem cells was established by immunofluorescence cytophotometry.

Quantum Cascade Laser Infrared Spectroscopy for Glycan Analysis of Glycoprotein Solutions.

Glycans are oligosaccharides attached to proteins or lipids and affect their functions, such as drug efficacy, structural contribution, metabolism, immunogenicity, and molecular recognition. Conventional glycosylation analysis has relied on destructive, slow, system-sensitive methods, including enzymatic reactions, chromatography, fluorescence labeling, and mass spectrometry. Herein, we propose quantum cascade laser (QCL) infrared (IR) spectroscopy as a rapid, nondestructive method to quantify glycans and their monosaccharide composition. Previously, we demonstrated high-sensitivity IR spectroscopy of protein solution using solvent absorption compensation (SAC) and double-beam modulation (DBM) techniques. However, the SAC-DBM approach suffered a limited frequency scanning range (<400 cm-1) due to the light dispersion by acousto-optic modulators (AOMs). Here, we implemented a mirror-based double-pass AOM in the SAC-DBM scheme and successfully extended the frequency range to (970 to 1840 cm-1), which encompasses the vibrational fingerprint of biomolecules. The extended frequency range allowed the simultaneous observation of monosaccharide ring bands (1000 to 1200 cm-1) and protein amide bands (1500 to 1700 cm-1). We compared the IR spectra of six glycoproteins and two nonglycosylated proteins with the results from intact mass spectrometry. The IR absorbance ratios of the ring band to the amide band of glycoproteins in solutions showed a linear correlation with the ratios of glycan to protein backbone masses. Furthermore, a multivariate analysis produced monosaccharide compositions consistent with the reported database for the glycoproteins, and the monosaccharide compositions were used to improve the predictability of the glycan-protein mass ratio from the IR-absorbance ratio. This nondestructive, high-sensitivity QCL-IR spectroscopy could be used as a standard method to monitor batch-to-batch comparability during drug manufacturing and quantify the glycosylation and monosaccharide composition of new glycoproteins and other glycosylated biosystems.

Multimodal Hard X‐ray Nanotomography Probes Pore Accessibility of Technical Catalysts after Coking

Coking is a common catalyst deactivation route in industrial processes involving carbonaceous species. While coking is easy to diagnose, this is often performed by bulk analysis. Understanding specific symptoms such as pore blockage and obstruction of active sites is especially challenging for technical catalysts and requires a spatially‐resolved approach. Here a combination of ptychographic X‐ray computed tomography (PXCT) and X‐ray fluorescence nanotomography (XRF‐CT) could identify and allocate regions of coke deposition within a technical zeolite‐based propane dehydrogenation catalyst. PXCT is sensitive to the quantitative electron density of the sample, therefore indirectly visualising coke deposition in meso‐ and macropores with 56‐61 nm 3D spatial resolution. For more direct visualisation the catalysts were treated with Cu solution as fluorescent marker, whereby complementary XRF‐CT analysis could distinguish accessible and blocked pores based on the presence or absence of adsorbed Cu. This strategy was used to assess coking as a function of time on stream, to evaluate coke removal by oxidative regeneration, and to distinguish the presence of coke deposits separately within the zeolite and binder components. This strategy is applicable to virtually any porous solid catalyst and can deliver previously unknown insights into the common phenomenon of coke deposition particularly in technical catalysts.

PH-Sensitive Fluorescent Marker Based on Rhodamine 6G Conjugate with Its FRET/PeT Pair in "Smart" Polymeric Micelles for Selective Imaging of Cancer Cells.

Cancer cells are known to create an acidic microenvironment (the Warburg effect). At the same time, fluorescent dyes can be sensitive to pH, showing a sharp increase or decrease in fluorescence depending on pH. However, modern applications, such as confocal laser scanning microscopy (CLSM), set additional requirements for such fluorescent markers to be of practical use, namely, high quantum yield, low bleaching, minimal quenching in the cell environment, and minimal overlap with auto-fluorophores. R6G could be the perfect match for these requirements, but its fluorescence is not pH-dependent. We have attempted to develop an R6G conjugate with its FRET or PeT pair that would grant it pH sensitivity in the desired range (5.5-7.5) and enable the selective targeting of tumor cells, thus improving CLSM imaging. Covalent conjugation of R6G with NBD using a spermidine (spd) linker produced a pH-sensitive FRET effect but within the pH range of 7.0-9.0. Shifting this effect to the target pH range of 5.5-7.5 appeared possible by incorporating the R6G-spd-NBD conjugate within a "smart" polymeric micelle based on chitosan grafted with lipoic acid. In our previous studies, one could conclude that the polycationic properties of chitosan could make this pH shift possible. As a result, the micellar form of the NBD-spd-R6G fluorophore demonstrates a sharp ignition of fluorescence by 40%per1 pH unit in the pH range from 7.5 to 5. Additionally, "smart" polymeric micelles based on chitosan allow the label to selectively target tumor cells. Due to the pH sensitivity of the fluorophore NBD-spd-R6G and the selective targeting of cancer cells, the efficient visualization of A875 and K562 cells was achieved. CLSM imaging showed that the dye actively penetrates cancer cells (A875 and K562), while minimal accumulation and low fluorophore emission are observed in normal cells (HEK293T). It is noteworthy that by using "smart" polymeric micelles based on polyelectrolytes of different charges and structures, we create the possibility of regulating the pH dependence of the fluorescence in the desired interval, which means that these "smart" polymeric micelles can be applied to the visualization of a variety of cell types, organelles, and other structures.

Surface-Functionalized Halo-Tag Gold Nanoprobes for Live-Cell Long-Term Super-Resolution Imaging of Endoplasmic Reticulum Dynamics.

Super-resolution fluorescence microscopy has emerged as a powerful tool for studying endoplasmic reticulum (ER) dynamics in living cells. However, the lack of high-brightness, high-photostability, and stable labeling probes makes long-term super-resolution imaging of the ER still challenging. Herein, we reported a surface-functionalized Halo-tag gold nanofluorescent probe (GNP-Atto565-fR8-CA) that exhibits excellent brightness, photostability, and biocompatibility. GNP-Atto565-fR8-CA can simultaneously load multiple Atto565 dye molecules, significantly improving its brightness. Modifying the cell-penetrating peptide fR8 enables GNP-Atto565-fR8-CA to be efficiently delivered into the cytoplasm, overcoming the challenge of their easy entrapment in vesicles. Fluorescent labeling of ER proteins via Halo tags enables high specificity and stable labeling of GNP-Atto565-fR8-CA to the ER. The SIM super-resolution imaging results showed that GNP-Atto565-fR8-CA can track and observe the long-term dynamic process of the ER, and can also be used for long-term super-resolution imaging of the dynamic interactions between the ER and other organelles. This work offers a practical tool to study live-cell ER ultrastructure and dynamics.

DeepQR: single-molecule QR codes for optical gene-expression analysis

Abstract Optical imaging and single-molecule imaging, in particular, utilize fluorescent tags in order to differentiate observed species by color. The degree of color multiplexing is dependent on the available spectral detection window and the ability to distinguish between fluorophores of different colors within this window. Consequently, most single-molecule imaging techniques rely on two to four colors for multiplexing. DeepQR combines compact spectral imaging with deep learning to enable 4 color acquisition with only 3 spectral detection windows. It allows rapid high-throughput acquisition and decoding of hundreds of unique single-molecule color combinations applied here to tag native RNA targets. We validate our method with clinical samples analyzed with the NanoString gene-expression inflammation panel side by side with the commercially available NanoString nCounter system. We demonstrate high concordance with “gold-standard” filter-based imaging and over a four-fold decrease in acquisition time by applying a single snapshot to record four-color barcodes. The new approach paves the path for extreme single-molecule multiplexing.

Insulin promotes the bone formation capability of human dental pulp stem cells through attenuating the IIS/PI3K/AKT/mTOR pathway axis

BackgroundInsulin has been known to regulate bone metabolism, yet its specific molecular mechanisms during the proliferation and osteogenic differentiation of dental pulp stem cells (DPSCs) remain poorly understood. This study aimed to explore the effects of insulin on the bone formation capability of human DPSCs and to elucidate the underlying mechanisms.MethodsCell proliferation was assessed using a CCK-8 assay. Cell phenotype was analyzed by flow cytometry. Colony-forming unit-fibroblast ability and multilineage differentiation potential were evaluated using Toluidine blue, Oil red O, Alizarin red, and Alcian blue staining. Gene and protein expressions were quantified by real-time quantitative polymerase chain reaction and Western blotting, respectively. Bone metabolism and biochemical markers were analyzed using electrochemical luminescence and chemical colorimetry. Cell adhesion and growth on nano-hydroxyapatite/collagen (nHAC) were observed with a scanning electron microscope. Bone regeneration was assessed using micro-CT, fluorescent labeling, immunohistochemical and hematoxylin and eosin staining.ResultsInsulin enhanced the proliferation of human DPSCs as well as promoted mineralized matrix formation in a concentration-dependent manner. 10− 6 M insulin significantly up-regulated osteogenic differentiation-related genes and proteins markedly increased the secretion of bone metabolism and biochemical markers, and obviously stimulated mineralized matrix formation. However, it also significantly inhibited the expression of genes and proteins of receptors and receptor substrates associated with insulin/insulin-like growth factor-1 signaling (IIS) pathway, obviously reduced the expression of the phosphorylated PI3K and the ratios of the phosphorylated PI3K/total PI3K, and notably increased the expression of the total PI3K, phosphorylated AKT, total AKT and mTOR. The inhibitor LY294002 attenuated the responsiveness of 10− 6 M insulin to IIS/PI3K/AKT/mTOR pathway axis, suppressing the promoting effect of insulin on cell proliferation, osteogenic differentiation and bone formation. Implantation of 10− 6 M insulin treated DPSCs into the backs of severe combined immunodeficient mice and the rabbit jawbone defects resulted in enhanced bone formation.ConclusionsInsulin induces insulin resistance in human DPSCs and effectively promotes their proliferation, osteogenic differentiation and bone formation capability through gradually inducing the down-regulation of IIS/PI3K/AKT/mTOR pathway axis under insulin resistant states.

Diffusion of nanoparticles in heterogeneous hydrogels as vitreous humour in vitro substitutes

Nanomedicine has the potential to increase the biostability of drugs to treat retinal diseases, improving their performance and decreasing the required number of intravitreal injections. However, accurate pharmacokinetic studies of these nanoparticle-drug conjugates, nanoparticle motion across the vitreous humour and interaction with the retinal cell layers still need to be investigated. Existing nanoparticle tracking techniques require fluorescent labels, which can impact cytotoxicity, nanoparticles’ motion, protein interactions, and cell internalization. In this study, a real-time label-free tracking technology, for single nanoparticles in an optical microscope based on the optical phenomena of caustics, was used to characterise the diffusion of nanoparticles in agar-hyaluronic acid hydrogels, previously validated as vitreous humour substitutes for in vitro models. The results demonstrated that the diffusion of nanoparticles through these hydrogels was heterogeneous, and that nanoparticle size had an important role in nanoparticle distribution across and within in vitro vitreous substitutes. These findings suggest that nanoparticle diameter is a critical parameter for designing novel therapeutics for retinal diseases. Moreover, nanoparticle charge did not affect nanoparticle diffusion or distribution in these synthetic hydrogels. The use of caustics in optical microscopy has been demonstrated to be a reproducible, inexpensive technique for screening novel therapeutics in eye in vitro models.

A novel Bacillus aerolatus CX253 attenuates inflammation induced by Streptococcus pneumoniae in childhood and pregnant rats by regulating gut microbiome

Streptococcus pneumoniae (Spn) is the predominant pathogen responsible for community-acquired pneumonia (CAP) in children under five years old, and it can induce over 17% of pregnant women. However, no more effective measures exist to prevent infection induced by Spn in these two special populations. The beneficial microbes can antagonize Spn and provide new targets for preventing pneumococcal infections. This study used 16S rRNA gene sequencing and targeted metabolomics to evaluate the role of the Bacillus aerolatus CX253 (CX253) in alleviating Spn infection. Additionally, the colonization of CX253 was observed in nose, trachea, and lung by using confocal laser scanning microscopy and fluorescent labeling techniques. Compared with the model group, the expression level of interleukin-1β was dropped 1.81-fold and 2.22-fold, and interleukin-6 was decreased 2.39-fold and 1.84-fold. The express of tumor necrosis factor-α was down 2.30-fold and 3.84-fold in prevention group of childhood and pregnant rats, respectively. The 16S rRNA sequencing results showed that CX253 administration alone significantly increased the abundance of Lactobacillus, Limosilactobacillus, and Prevotella in the gut of childhood and pregnant rats. Furthermore, the CX253 increased propionate in the gut of childhood rats and increased propionate and butyrate in the gut of pregnant rats to inhibit pulmonary inflammation. In summary, CX253 attenuated Spn-induced inflammation by regulating the gut microbiota and SCFAs. The research provides valuable information for the prevention of pneumonia.Graphical

Titanium vs PEO Surface-Modified Magnesium Plate Fixation in a Mandible Bone Healing Model in Sheep.

Titanium plates are the current gold standard for fracture fixation of the mandible. Magnesium alloys such as WE43 are suitable biodegradable alternatives due to their high biocompatibility and elasticity modulus close to those of cortical bone. By surface modification, the reagibility of magnesium and thus hydrogen gas accumulation per time are further reduced, bringing plate fixation with magnesium closer to clinical application. This study aimed to compare bone healing in a monocortical mandibular fracture model in sheep with a human-standard size, magnesium-based, plasma electrolytic-oxidation (PEO) surface modified miniplate fixation system following 4 and 12 weeks. Bone healing was analyzed using micro-computed tomography and histological analysis with Movat's pentachrome and Giemsa staining. For evaluation of the tissue's osteogenic activity, polychrome fluorescent labeling was performed, and vascularization was analyzed using immunohistochemical staining for alpha-smooth muscle actin. Bone density and bone mineralization did not differ significantly between titanium and magnesium (BV/TV: T1: 8.74 ± 2.30%, M1: 6.83 ± 2.89%, p = 0.589 and T2: 71.99 ± 3.13%, M2: 68.58 ± 3.74%, p = 0.394; MinB: T1: 26.16 ± 9.21%, M1: 22.15 ± 7.99%, p = 0.818 and T2: 77.56 ± 3.61%, M2: 79.06 ± 4.46%, p = 0.699). After 12 weeks, minor differences were observed regarding bone microstructure, osteogenic activity, and vascularization. There was significance with regard to bone microstructure (TrTh: T2: 0.08 ± 0.01 mm, M2: 0.06 ± 0.01 mm; p = 0.041). Nevertheless, these differences did not interfere with bone healing. In this study, adequate bone healing was observed in both groups. Only after 12 weeks were some differences detected with larger trabecular spacing and more vessel density in magnesium vs titanium plates. However, a longer observational time with full resorption of the implants should be targeted in future investigations.

Safeguarding reverse osmosis membrane integrity in drinking water production: A pilot study using 2 native bacterial communities and viruses in surface water as integrity indicators

Water treatment train including a reverse osmosis barrier is capable of producing high-quality water coupled with microbial safety. However, analytically proving this with log removal value (LRV) > 3 has remained a challenge. Conservative techniques that quantify salt or sulfate ion passage as virus surrogates are currently used to credit the membrane system for its microbial removal capacity. These methods are insensitive, and it is now understood that the transport mechanism correlation between these surrogates with the actual passage of viruses is weak. There is also a huge gap between the current log credit assigned (using spiking of surrogates in feed) and the actual log removal that can be proven in the drinking water plant. In this paper, we introduce two techniques that exploit the high concentration of microbial communities in fresh surface water by quantifying bacteria through flow cytometry (FC) and native viruses through qPCR assays. These two methods are compared to LRV of conductivity, TOC, and fluorescent markers. That high concentration of bacterial community allowed for LRV > 4 by flow cytometry in an intact module. After inflicting damage with a 1.5 mm defect, the FC method detected the damage, and a bacterial cell count >103 cell count/ml was measured in the permeate, while conductivity lacked sensitivity to monitor any integrity loss. Furthermore, after chlorine exposure to the membrane, both bacteria and virus detected no leakage, proving the membrane's intactness and also demonstrating the effect of chlorination on the passage of small solutes. The implementation of the two microbial quantifying methods in full-scale water treatment plants facilitates higher sensitivity in membrane integrity loss than currently used methods.

Fast and Accurate Recognition of Perovskite Fluorescent Anti-counterfeiting Labels Based on Lightweight Convolutional Neural Networks.

Anti-counterfeiting technology has always been a key issue in the field of information security. Physical Unclonable Function (PUF) labels, which are random patterns produced by a stochastic process, emerge as an effective anti-counterfeiting strategy due to the inherent randomness of their physical patterns. In this study, we developed a high-throughput droplet array generation technique based on surface tension confinement to prepare perovskite crystal films with controllable shapes and sizes. We utilized the random distribution of perovskite nanocrystal particles to construct the PUF textures of the labels. Compared to other anti-counterfeiting labels, our labels not only possess fluorescent properties but also feature microscale dimensions (less than 5.3 × 10-2mm2), low cost (less than 3 × 10-4 USD), and high encoding capacity (1.7 × 101956), providing support for multilevel anti-counterfeiting protection. Additionally, we introduce an innovative PUF recognition method based on a Partial Convolutional Network (PaCoNet), effectively addressing the limitations of previous methods, in terms of recognition accuracy and speed. Experimental validation on a data set of perovskite nanocrystal films with up to 60 different macroscopic shapes and unique microscopic textures demonstrates that our method achieves a recognition accuracy of up to 99.65% and significantly reduces the recognition time per image to just 0.177 s, highlighting the potential application of these labels in the field of anti-counterfeiting.