Fluorescence Intensity Of Samples Research Articles

Citrate Phosphate Dextrose Alters Coagulation Dynamics Ex Vivo

IntroductionCitrate-phosphate-dextrose (CPD) is the most common anticoagulant for blood product storage in the United States. It was developed to prolong shelf life, though there is little research regarding its impact on function following transfusion. We used flow cytometry (FC), thromboelastography (TEG), and a clot contraction assay called the zFlex platform to measure platelet activation and global clot formation in blood samples anticoagulated with either CPD or in a standard blue top citrate (BTC) tube. MethodsSamples were obtained through venipuncture of the antecubital fossa from healthy donors who had not recently taken antiplatelet medication. Samples for FC analysis were spun to obtain platelet-rich plasma, while TEG and zFlex utilized recalcified whole blood. ResultsMean fluorescence intensity for CD62p (P-selectin, marker of platelet activation) in baseline samples was equal, while mean fluorescence intensity in samples activated with thrombin receptor activating peptide was higher in CPD than BTC (65,814 ± 4445 versus 52,483 ± 5435, P = 0.007). TEG results demonstrated similar maximum amplitude for CPD (62.7 ± 1.8 mm versus 61 ± 1 mm) (P = 0.33), though reaction time and kinetics time were significantly longer in CPD versus BTC. CPD R-time: 7.9 ± 0.4 min versus BTC: 3.8 ± 0.4 (P < 0.001). CPD K-time: 2.2 ± 0.2 min versus BTC: 1.6 ± 0.1 min (P < 0.001). Clot contraction strength was not different between the two groups on zFlex: CPD 4353 ± 6 = 517 μN versus BTC 4901 ± 390 μN (P = 0.39). ConclusionsOur findings suggest that CPD does not affect platelet function (minimal difference on FC and no difference in ultimate clot strength, which is ∼80% due to platelet function) but may alter clot dynamics by attenuating thrombin generation.

In situ detection of endogenous proteolytic activity and the effect of inhibitors on tooth root surface

ObjectivesThe aim of this study was to clarify the distribution and activity of proteolytic enzymes and examine the inhibitory effects of various substances on this proteolytic activity on tooth root surfaces in situ. MethodsDisk-shaped bovine tooth root samples were partly pretreated in acid solution (50 mM lactic acid buffer, pH 4.0) for 48 h. The fluorescence intensity of samples was detected with fluorescent substrate solution for collagenase and gelatinase using a stereoscopic fluorescence microscope for 60 min. The acid-pretreated and non-acid-pretreated root samples were treated with chlorhexidine (CHX), sodium fluoride (NaF), epigallocatechin gallate (EGCG), and calcium hydroxide (Ca(OH)2) for 10 min, and silver diamine fluoride (SDF) for 10, 30, and 60 s. These samples were immersed in the fluorescence substrate solution at pH 7.0, and the fluorescence intensity of samples was detected. The fluorescence intensity was calculated using analysis software. ResultsGelatinase activity was detected in root samples. Gelatinase activity of the acid-pretreated side was significantly higher than that of the non-acid-pretreated side (1.63 times) at 60 min. CHX, EGCG, Ca(OH)2, and SDF decreased the gelatinase activity of root samples, while NaF had no effect. ConclusionsGelatinase activity was detected from the root in situ and it was increased by acid-pretreatment. CHX, EGCG, Ca(OH)2, and SDF inhibited gelatinase activity. Clinical significanceSubstances that inhibit proteolytic activity found in this research method will be useful for root caries prevention.

Automated quantification of fluorescence and morphological changes in pretreated wood cells by fluorescence macroscopy

BackgroundLignocellulosic biomass is a complex network of polysaccharides and lignin that requires a pretreatment step to overcome recalcitrance and optimize valorisation into biobased products. Pretreatment of biomass induces chemical and morphological changes. Quantification of these changes is critical to understand biomass recalcitrance and to predict lignocellulose reactivity. In this study, we propose an automated method for the quantification of chemical and morphological parameters through fluorescence macroscopy, which was applied on wood samples (spruce, beechwood) pretreated with steam explosion.ResultsResults in fluorescence macroscopy highlighted the impact of steam explosion on spruce and beechwood: fluorescence intensity of samples was highly altered, especially for the most severe conditions. Morphological changes were also revealed: shrinkage of cells and deformation of cell walls manifested as the loss of rectangularity or circular shape, for tracheids in spruce and vessels in beechwood respectively. Quantification of fluorescence intensity of cell walls and quantification of morphological parameters related to cell lumens were carried out accurately by applying the automated method onto the macroscopic images. The results showed that lumens area and circularity could be considered as complementary markers of cell deformation, and that fluorescence intensity of the cell walls could be related to morphological changes and to the conditions of pretreatment.ConclusionsThe developed procedure allows simultaneous and effective quantification of morphological parameters and fluorescence intensity of the cell walls. This approach can be applied to fluorescence macroscopy as well as other imaging techniques and provides encouraging results towards the understanding of biomass architecture.

Evidence on Invasion of Blood, Adipose Tissues, Nervous System and Reproductive System of Mice After a Single Oral Exposure: Nanoplastics versus Microplastics

ObjectiveThis study was designed to provide the evidences on the toxicokinetics of microplastics (MPs) and nanoplastics (NPs) in the bodies of mammals. Methods100 nm, 3 μm, and 10 μm fluorescent polystyrene (PS) beads were administered to mice once by gavage at a dose of 200 mg/kg body weight. The levels and change of fluorescence intensity in samples of blood, subcutaneous fat, perirenal fat, peritesticular fat, cerebrum, cerebellum, testis, and epididymis were measured at 0.5, 1, 2, and 4 h after administration using an IVIS Spectrum small-animal imaging system. Histological examination, confocal laser scanning, and transmission electron microscope were performed to corroborate the findings. ResultsAfter confirming fluorescent dye leaching and impact of pH value, increased levels of fluorescence intensity in blood, all adipose tissues examined, cerebrum, cerebellum, and testis were measured in the 100 nm group, but not in the 3 and 10 μm groups except in the cerebellum and testis at 4 h for the 3 μm PS beads. The presence of PS beads was further corroborated. ConclusionAfter a single oral exposure, NPs are absorbed rapidly in the blood, accumulate in adipose tissues, and penetrate the blood-brain/testis barriers. As expected, the toxicokinetics of MPs is significantly size-dependent in mammals.

FEATURES OF STIMULATED EMISSION OF A MEROCYANINE DYE IN THE PORES OF ANODIZED ALUMINUM

The results of the study of the spectral-luminescent properties and the generation of stimulated emission of merocyanine dye molecules in a porous aluminum oxide films are presented. The addition of silver nanoparticles to the porous aluminum oxide films leads to an increase in the absorption cross section and an increase in the quantum yield of dye fluorescence in the alumina films. However, in the alumina films with silver nanoparticles, the generation of stimulated emission of dye molecules was not detected. We also studied the effect of polymethyl methacrylate polymer deposited on the surface of the alumina films with a dye on the spectral-luminescent properties and generation of stimulated emission of this dye. An increase in the optical density in the absorption band of the dye and an increase in the fluorescence intensity in samples with a deposited polymethyl methacrylate film are observed. The generation threshold of polymethine dye is reduced by a factor of 40 in the porous aluminum oxide sample with polymethyl methacrylate.

CsPbBr3 nanocrystals prepared by high energy ball milling in one-step and structural transformation from CsPbBr3 to CsPb2Br5

All-inorganic halide perovskite nanocrystals (NCs) are generally prepared by liquid phase method with the help of volatile organic solvents, inert gas protection and complex organometallic precursors. Herein, a simple, efficient and green method based on all-solid-state mechanochemical synthesis is proposed to prepare CsPbBr3 NCs. NCs with excellent performance can be prepared by grinding raw materials CsBr and PbBr2 through high energy ball milling, and prepared NCs show good stability in ethanol and living conditions. Interestingly, CsPbBr3 NCs prepared by ball milling have a sudden increase in their fluorescence intensity dispersed in water. After soaking for 8 h, CsPbBr3 NCs have been almost entirely transformed into CsPb2Br5 NCs. The fluorescence intensity of samples is 80 times of that before soaking, and absolute PL quantum yield (PLQY) of samples increases significantly by up to 92%. These results provide a strong evidence for the current debate about whether CsPb2Br5 emits light and propose a deeper understanding about structural transition from orthorhombic CsPbBr3 to tetragonal CsPb2Br5, which is of great significance to the application of CsPb2Br5 in optoelectronic devices. This will provide a new idea for the synthesis and transformation of halide perovskites.

SURG-10. SPECTROSCOPIC MEASUREMENT OF 5-ALA-INDUCED INTRACELLULAR PROTOPORPHYRIN IX IN PEDIATRIC BRAIN TUMORS

OBJECTIVE5-ALA guided resection of glioma in adults enables better delineation between tumor and normal brain, allowing improved resection and improved patients’ outcome. Recently, several reports were published regarding 5-ALA for resection of pediatric brain tumors. The aim of the study was to determine the intracellular fluorescence of PPIX in pediatric brain tumors by hyperspectral imaging and to compare it with visually observed intraoperative fluorescence.METHODS5-ALA was administered orally four hours prior to surgery. During tumor resection the surgeon assessed the fluorescence signal to be strong, weak or absent. Subsequently, fluorescence intensity of samples was measured via spectroscopy. In addition, clinical data, imaging and laboratory data were analyzed.RESULTSEleven children (1–16 years) were operated. Tumor entities included: three medulloblastomas, two pilocytic astrocytomas (PA), two anaplastic ependymomas and one diffuse astrocytoma, anaplastic astrocytoma, pilomyxoid astrocytoma and anaplastic pleomorphic xanthoastrocytoma. Strong fluorescence was visible in all anaplastic tumors and one PA; one PA demonstrated weak fluorescence. Visible fluorescence was strongly associated with intracellular fluorescence intensity and PPIX concentration (P<0.05). Within all tumors with visible fluorescence the intracellular PPIX concentration was greater than 4 µg/ml. Except for moderate and transient elevation of liver enzymes, no 5-ALA related adverse events were reported.CONCLUSIONWe demonstrate a strong association between intraoperative observations and spectrometric measurements of PPIX fluorescence in tumor tissue. As in former studies, fluorescence signal was more commonly observed in malignant glial tumors. Further prospective controlled trials should be conducted to investigate the feasibility of 5-ALA guided resection of pediatric brain tumors.

Comparing DPPP fluorescence and UV based methods to assess oxidation degree of krill oil-in-water emulsions

In this study, lipid oxidation evaluation methods were compared for a krill-oil-in-water emulsion system. With this aim, thiocyanate and DPPP (diphenyl-1-pyrenylphosphine) fluorescence methods were comparatively examined to determine primary oxidation products. 2-thiobarbituric acid reactive substances (TBARS), hexanal and propanal formation were also monitored as secondary oxidations products. All oxidation experiments were performed via both auto-oxidation at 45 °C and light-riboflavin induced photooxidation at 37 °C. The results have shown that thiocyanate method was not suitable to measure lipid hydroperoxides by the both in auto- and photo-oxidation systems. On the other hand, fluorescence intensity of samples containing the DPPP probe increased during incubation period which indicates the formation of lipid hydroperoxides could be detected via this method. TBARS, hexanal and propanal concentrations also increased during storage period and the formation kinetics of secondary oxidation products was confirmed that the DPPP fluorescence method was accurate and reliable at different environmental conditions.

48 EFFECT OF DIMETHYL SULFOXIDE- OR GLYCEROL-BASED VITRIFICATION PROTOCOLS ON THE DNA METHYLATION OF BOVINE CUMULUS-OOCYTE COMPLEXES

Although vitrification is becoming increasingly common for oocyte preservation, there has been recent evidence that some cryoprotectants may alter DNA methylation and so result in decreased oocyte developmental competence and abnormal embryonic development post-warming. The objective of this study was to determine the effect of dimethyl sulfoxide (DMSO)- or glycerol-based vitrification protocols on DNA methylation in bovine cumulus-oocyte complexes (COC). The vitrification protocols evaluated included a combination of ethylene glycol (EG) with either DMSO or glycerol (GLY). Cumulus-oocyte complexes were first exposed to equilibration solution (ES) consisting of 7.5% DMSO or GLY and 7.5% EG for 9 min at room temperature (RT) before being transferred to vitrification solution (VS) containing 15% DMSO or GLY, 15% EG, and 0.5 M sucrose. While in VS, 3 to 4 COC were loaded into an open system vitrification device (Cryolock®, BioTech Inc.) and plunged into LN within 1 min. For warming, COC were exposed to dilution solution 1 consisting of 0.5 M sucrose (37°C) for 2.5 min and to dilution solution 2 consisting of 0.25 M sucrose for 2.5 min (RT). Base media for all solution was PBS supplemented with 20% FBS. Cumulus-oocyte complexes (n = 137) were collected from crossbred cows by ovum pick-up on 3 separate days (repetitions), with half of the oocytes each day being matured to metaphase II (MII) stage before vitrification and the other half vitrified as germinal vesicle (GV) COC. The resulting treatments were DMSO GV v. Glycerol GV and DMSO MII v. Glycerol MII. Fresh COC (GV and MII stage, respectively) were utilised as controls. DNA methylation analysis of oocytes was performed through fluorescent staining using a primary antibody anti-5 mC (1:1000) and secondary antibody Alexa Fluor 488 (1:500). Fluorescence intensity of samples was measured using ImageJ software (NIH, Bethesda, MD, USA). Data were analysed through ANOVA with post hoc Tukey’s test. No differences between the vitrification groups or controls were found when analysing DNA methylation of GV stage COC (P = 0.1825). Metaphase II stage COC showed statistical difference between groups (P &lt; 0.001) where glycerol-treated MII oocytes exhibited higher DNA methylation compared with DMSO MII and fresh MII COC. Results of the experiment showed that the glycerol-based vitrification protocol causes alteration of DNA methylation of bovine metaphase II cumulus-oocyte complexes, and as such may not be an optimal choice in mature oocyte vitrification protocols.

Non-enzymatic quantification of polyphosphate levels in platelet lysates and releasates

Inorganic polyphosphate has been shown to be shed upon platelet activation inducing prothrombotic stimuli on the coagulation system. Several methods have been published to detect and quantify polyphosphate in various cells and tissues, but evaluation of platelet content has only been achieved by indirect detection of orthophosphate after enzymatic digestion, thus, relying heavily on specificity of an exopolyphosphatase that is not commercially available.We present a non-enzymatic method for quantification of platelet-derived polyphosphate featuring optimized extraction on silica spin-columns, followed by specific fluorescence detection using DAPI. This allowed us to quantify polyphosphate in platelet lysates, but also in releasates of TRAP-activated platelets for the first time.Extraction of exogenous polyphosphate from buffer and sample matrices resulted in quantitative yields while removing matrix effects observed with direct fluorescence detection. Treatment of eluted fractions with phosphatase completely abrogated polyphosphate-specific fluorescence arguing for no additional compounds influencing the fluorescence detection. This was confirmed by no change in fluorescence intensity in samples previously treated with DNase and RNase.Taken together, we developed a robust and easily standardizable method to quantify polyphosphate in platelet lysates and releasates that will facilitate polyphosphate related investigations of platelet physiology and coagulation.

Spectroscopic evidence of anthropogenic compounds extraction from polymers by fluorescent dissolved organic matter in natural water

FDOM is one of the most important carriers of anthropogenic compounds in natural waters. It can combine with environmental contaminants and polymers to form diverse chemical structures. To this end, here a microfluidic chip was designed for the analysis of these changes in fluorescent dissolved organic matter (FDOM) fingerprints due to thermal treatment and varying time intervals of exposure. Excitation Emission Matrix Spectroscopy (EEMS) approach was utilized to detect and identify the inherent compounds in sampled FDOM. Strong direct correlations were founded, Spearman rank correlation values (ρ = 0.85 at α = 0.1, n = 4) and linear correlation R2 = 0.8359 were noted between thermal treatment pattern 2 and fluorescence intensity of samples. Materials, acrylic based glue and cyclic olefin copolymer (COC) polymer, used to design the microfluidic sensor were determined to possess unique spectral features in the ultraviolet to green spectrum using EEMS. The study therefore provides an insight on methods to identify contaminants in natural waters. This underlines the potential of optical sensors providing measurements at fast intervals, enabling environmental monitoring.

Mutation in Osteoactivin Decreases Bone Formation in Vivo and Osteoblast Differentiation in Vitro

We have previously identified osteoactivin (OA), encoded by Gpnmb, as an osteogenic factor that stimulates osteoblast differentiation invitro. To elucidate the importance of OA in osteogenesis, we characterized the skeletal phenotype of a mouse model, DBA/2J (D2J) with a loss-of-function mutation in Gpnmb. Microtomography of D2J mice showed decreased trabecular mass, compared to that in wild-type mice [DBA/2J-Gpnmb(+)/SjJ (D2J/Gpnmb(+))]. Serum analysis showed decreases in OA and the bone-formation markers alkaline phosphatase and osteocalcin in D2J mice. Although D2J mice showed decreased osteoid and mineralization surfaces, their osteoblasts were increased in number, compared to D2J/Gpnmb(+) mice. We then examined the ability of D2J osteoblasts to differentiate in culture, where their differentiation and function were decreased, as evidenced by low alkaline phosphatase activity and matrix mineralization. Quantitative RT-PCR analyses confirmed the decreased expression of differentiation markers in D2J osteoblasts. Invitro, D2J osteoblasts proliferated and survived significantly less, compared to D2J/Gpnmb(+) osteoblasts. Next, we investigated whether mutant OA protein induces endoplasmic reticulum stress in D2J osteoblasts. Neither endoplasmic reticulum stress markers nor endoplasmic reticulum ultrastructure were altered in D2J osteoblasts. Finally, we assessed underlying mechanisms that might alter proliferation of D2J osteoblasts. Interestingly, TGF-β receptors and Smad-2/3 phosphorylation were up-regulated in D2J osteoblasts, suggesting that OA contributes to TGF-β signaling. These data confirm the anabolic role of OA in postnatal bone formation.

Single-nucleotide polymorphism (SNP) genotyping using cationic conjugated polymers in homogeneous solution

This protocol describes a simple, convenient and sensitive single-nucleotide polymorphism (SNP) genotyping method using an optically amplifying cationic conjugated polymer and single base primer extension reaction. The fluorescence resonance energy transfer (FRET) efficiency between the conjugated polymer (PFP, poly{(1,4-phenylene)-2,7-[9,9-bis(6'-N,N,N-trimethyl ammonium)-hexyl fluorene] dibromide}) and a fluorescein-labeled dNTP (dNTP-Fl) is correlated to the incorporation of the dNTP-Fl into an allele-specific primer; incorporation occurs by a single base extension reaction when the target DNA and the primer are complementary at the SNP site. By triggering the FRET from PFP to fluorescein and measuring the change in fluorescence intensity of samples, the SNP genotypes can be discriminated. In comparison with other SNP genotyping methods, this protocol simplifies procedures and improves sensitivity by eliminating the need for primer labeling, cumbersome workups, chemical/enzymatic coupling reactions and sophisticated instruments. The assay takes about 2 h for PCR amplification followed by 5.5-7.5 h to obtain the genotypes.

Comparison of sample fixation and the use of LDS-751 or anti-CD45 for leukocyte identification in mouse whole blood for flow cytometry

Flow cytometry methods used to measure leukocyte function often entail sample preparation procedures that cause artifactual cell activation. To avoid leukocyte activation by isolation techniques, some preparation methods use fluorescent markers to discriminate leukocytes from erythrocytes in whole blood. One of these markers, laser dye styryl-751(LDS-751), has been used to distinguish leukocytes by staining nucleic acid, but has been found to stain other blood cells and dead cells indiscriminately. Thus, LDS-751 may not be an appropriate reagent for leukocyte identification in whole blood. Fixing samples with formaldehydes increases cell permeability and causes surface protein cross-linking that may alter staining of both intra- and extracellular markers. The degree of this sample alteration by formaldehyde fixation, however, remains in question. In addition, little is known about flow cytometry and sample preparation methods in mouse whole blood. The purpose of this study was to determine if labeling leukocytes with a monoclonal antibody specific to leukocyte common antigen (CD45) was superior to labeling with LDS-751 and to determine the effect of sample fixation on a mouse whole blood preparation for flow cytometry. Samples were incubated with CD16/CD32 Fc receptor blocker, and either 10 μg/ml LDS-751 or phosphate buffered saline (PBS). The samples were then fixed with paraformaldehyde or diluted with PBS followed by incubation with 5 μg/ml PerCP-conjugated anti-CD45, 5 μg/ml FITC-conjugated anti-CD11b, or 80 μM dichlorofluorescein diacetate. We found that samples labeled with LDS-751 demonstrated decreased fluorescence intensity for granulocyte CD11b expression and ROS production compared to samples labeled with anti-CD45. In addition, sample fixation decreased mean fluorescence intensity in samples labeled with either LDS-751 or anti-CD45. We conclude that labeling leukocytes with monoclonal antibody CD45 in a mouse whole blood preparation is preferable, as it provides improved measurement of leukocyte indices compared to LDS-751. Also, while sample fixation prior to antibody staining caused a decrease in overall fluorescence; it can be used to successfully identify extra-cellular markers.

A simple method for quantifying high density antigens in erythrocyte membrane by flow cytometry

RBC flow cytometric analysis is usually used to quantify antigen content. Calibration systems enable antigen content determination by relating mean fluorescence intensity with the number of bound antibody molecules (equivalent to the number of antigen molecules). For that reason, antibodies must be used at saturating concentration, which may lead to agglutination when working with high density antigens. Then, forward scattering, side scattering and fluorescence will be increased, thus obtaining wrong results. In this work, the simple Langmuir adhesion model was applied. Flow cytometry was used to quantify GPA, a transmembrane protein present at high density on RBC. The fluorescence intensity of samples at different anti-GPA sub-saturating concentrations was measured. Sometimes, agglutinates were present and two peaks of fluorescence were observed, the principal one corresponding to isolated cells and the secondary one corresponding to agglutinated cells. In those cases, the principal peak was taken into account for the analysis. The GPA antigen content obtained for nine analyzed samples ranged from 3 to 13 × 10 5 sites per cell, which is similar to those values found in literature. Therefore, the Langmuir adsorption model enables us to determine the antigen content for the anti-GPA/GPA system on RBC membrane. This model could be used to quantify high density antigens in RBC and in other cells.

Antibody to E1 peptide of hepatitis C virus genotype 4 inhibits virus binding and entry to HepG2 cells in vitro.

To analyze the neutralizing activity of antibodies against E1 region of hepatitis C virus (HCV). Specific polyclonal antibody was raised via immunization of New Zealand rabbits with a synthetic peptide that had been derived from the E1 region of HCV and was shown to be highly conserved among HCV published genotypes. Hyper-immune HCV E1 antibodies were incubated over night at 4 degree Celsius with serum samples positive for HCV RNA, with viral loads ranging from 615 to 3.2 million IU/ mL. Treated sera were incubated with HepG2 cells for 90 min. Blocking of viral binding and entry into cells by anti E1 antibody were tested by means of RT-PCR and flow cytometry. Direct immunostaining using FITC conjugated E1 antibody followed by Flow cytometric analysis showed reduced mean fluorescence intensity in samples pre-incubated with E1 antibody compared with untreated samples. Furthermore, 13 out of 18 positive sera (72%) showed complete inhibition of infectivity as detected by RT-PCR. In house produced E1 antibody, blocks binding and entry of HCV virion infection to target cells suggesting the involvement of this epitope in virus binding and entry. Isolation of these antibodies that block virus attachment to human cells are useful as therapeutic reagents.

Synthesis and characterization of an internal emission standard and applications to fluorescence studies of photosystem II

Fluorescence measurements of photosynthetic organisms and isolated proteins at ambient and low temperature have played an important role in understanding their function. When comparing fluorescence measurements at cryogenic temperatures, the differences in the scattering properties of frozen samples make it difficult to compare the fluorescence intensity of these samples. An internal emission standard can be used to scale the fluorescence intensity, compensating for these differences. We report the synthesis, purification and characterization of a luminescent terbium chelate complex for use as an internal emission standard for the study of photosystem II fluorescence at cryogenic temperatures. The ligand consists of a diethylenetriaminepentaacetic acid derivative where pyrimidine rings sensitize the terbium luminescence, overcoming the inherently low absorption of terbium. The chelated lanthanide remains in solution in the aqueous phase and does not interfere with photosystem II function. By scaling to the terbium emission, the fluorescence intensity of different samples can be readily compared. This chelate complex could also be used as an internal emission standard for studies of other proteins. © 1996 John Wiley & Sons, Inc.

A model for the calculation of theoretical intensities in X-ray fluorescence obtained by the limit dilution method and for the elimination of the matrix effect

The correction factors obtained via the limit dilution method (LDM) as the operating mode are denned. A simple mathematical model is used to obtain equations for the calculation of the correction coefficients H, M, Y and Y/H from experimental measurements of the sample's fluorescence intensity, measured at two different dilutions. The model can be used to calculate the theoretical fluorescence intensity for any dilution, which, when applied, shows and justifies the decreased matrix effect when dilution is increased; this facilitates the choice of the optimum degree or real dilution for a given matrix error. This paper proposes an algorithm for the calculation of the analyte concentration in samples with a complex matrix. The method is applied to the determination of calcium and iron in silicoaluminates. The results obtained show satisfactory accuracy with a theoretical dilution factor ƒ = 0.05.

In Vivo Fluorescence of Chlorophyll A: Estimation of Phytoplankton Biomass and Activity in Římov Reservoir (Czech Republic)

The in vivo fluorescence of chlorophyll a was measured in samples of natural phytoplankton taken from the Římov Reservoir (Czech Republic) during the years 1987 and 1988. The fluorescence intensities of samples either with or without addition of 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron, DCMU) were found reliable for calculating the concentration of chlorophyll a during periods when cyanobacteria were not abundant. The correction for background non-chlorophyll fluorescence appeared to be essential. No distinct correlation between a DCMU-induced increase of the fluorescence and primary production of phytoplankton was found.