Fluid Inclusions Research Articles

Holocene temperatures follow CO2 in southeastern Alaska

Understanding the temperature evolution during the Holocene is crucial for future climate projections. However, a puzzling discrepancy between climate models simulating a warming trend during the second half of the Holocene parallel to the rise in atmospheric CO2 concentrations and proxy data suggesting cooling during this period – known as the Holocene temperature conundrum – limits our understanding of how climate will evolve in the future. To solve this conundrum, the inclusion of quantitative paleotemperature records from high-latitude sites, which are extremely rare, is essential. Here, we use the hydrogen isotopic composition of fluid inclusions in speleothems from southeastern Alaska to create a quantitative temperature reconstruction of the entire Holocene. We show that the temperature in southeastern Alaska followed CO2, in agreement with modeling results. Because our data show no proxy-model bias, they support a seasonal proxy bias to account for the Holocene temperature conundrum.

Minerals of antimony: a newly found occurrence in the Karkonosze granitoid pluton and a review for Lower Silesia, Poland, with general background

The article describes assemblages of ore minerals of the size of tenths to a few millimetres, which occurred in small quartz veinlets and nests in 10 previously unknown sites. This mineralization was found in the north-eastern part of the Karkonosze granitoid pluton at the southern slope of the Wysoki Grzbiet (High Ridge) in Izera Mts. The studies concerned mainly 18 Sb minerals: antimony, Sb-bearing domeykite, getchellite, stibnite, willyamite, berthierite, boulangerite, bournonite, chalcostibite, falkmanite, famatinite, geocronite, robinsonite, semseyite, tetrahedrite-(Fe), cervantite, kermesite and schafarzikite; seven of them have been found in Poland for the first time. The parageneses, morphological features, XRD data and chemical composition of the Sb minerals are presented. Fluid inclusions in quartz adhering to the Sb minerals had generally homogenization temperature (Th) 108–341°C and total salinity ΣS 4.6–10.1 wt. %. The inclusion fluids were of the NaCO3- Ca(HCO3)2-NaCl-KCl type with minor F and S, and occasional CO2 presence. The parent granitoid contains Sb in trace amounts (0.18–0.36 ppm) and the rock was possibly a source of this (and other) element(s) for the ore minerals. Migration of meso-epithermal solutions with Sb etc. was probably stimulated by local reduction of pressure during the formation of fissures and cracks in granite, next filled by quartz with ore minerals. The features of the historical process of the recognition of Sb ores and previous studies of the minerals investigated in this research are included in the presentation and discussion. Special attention was paid to the listing of the occurreences of Sb minerals in Lower Silesia with appropriate references.

Impact of Overpressure on the Preservation of Liquid Petroleum: Evidence from Fluid Inclusions in the Deep Reservoirs of the Tazhong Area, Tarim Basin, Western China

The complexity of petroleum phases in deep formations plays an important role in the evaluation of hydrocarbon resources. Pressure is considered to have a positive impact on the preservation of liquid oils, yet direct evidence for this phenomenon is lacking in the case of deep reservoirs due to late destruction. Here, we present fluid-inclusion assemblages from a deep reservoir in the Tazhong area of the Tarim Basin, northwestern China, which formed as a direct consequence of fluid pressure evolution. Based on thermodynamic measurements and simulations of the coexisting aqueous and petroleum inclusions in these assemblages, the history of petroleum activities was reconstructed. Our results show that all analyzed fluid-inclusion assemblages demonstrated variable pressure conditions in different charging stages, ranging from hydrostatic to overpressure (a pressure coefficient of up to 1.49). Sequential petroleum charging and partial oil cracking may have been the main contributors to overpressure. By comparing the phases of petroleum and fluid pressures in the two wells, ZS1 and ZS5, it can be inferred that overpressure inhibits oil cracking. Thus, overpressure exerts an important influence on the preservation of liquid hydrocarbon under high temperatures. Furthermore, our results reveal that the exploration potential for liquid petroleum is considerable in the deep reservoirs of the Tarim Basin.

Origin and Evolution of Ore-Forming Fluid and Metallogenic Mechanism of the Baoshan Cu-Pb-Zn Deposit, South China: Constraints of Fluid Inclusion and C-H-O Isotopes

Origin and Evolution of Ore-Forming Fluid and Metallogenic Mechanism of the Baoshan Cu-Pb-Zn Deposit, South China: Constraints of Fluid Inclusion and C-H-O Isotopes

World-class amethyst-agate geodes from Los Catalanes, Northern Uruguay: genetic implications from fluid inclusions and stable isotopes

AbstractThe amethyst and agate geodes from the Los Catalanes Gemmological District in Uruguay represent one of the main deposits of its kind worldwide. The geometry of the deposit is horizontal, with an irregular distribution of amethyst geodes within the upper level of the basalt lava flows and shows strong variations in their abundance, as well as quality, geometry, and shape. Reliable exploration guides are scarce, and the limited knowledge of the geological parameters controlling its occurrence makes exploration unpredictable, leading to inaccurate reserve estimation. Based on cutting-edge methods including nucleation-assisted microthermometry of one-phase fluid inclusions and determination of triple oxygen isotope in silicates and carbonates, as well as analysis of geode-hosted water and groundwater, we estimate the crystallisation temperatures in the range between 15 and 60 °C. These low temperatures point to amethyst crystallisation after the emplacement of the complete basalt pile. The mineralising fluid shows isotopic signatures consistent with meteoric water and very low salinities from pure water up to rarely over 3 wt% NaCl-eq., likely sourced from the groundwater hosted in the aquifers in the basaltic sequence and underlying units. Based on the insights provided by the new data, we propose the combination of open- and closed-system crystallisation inside pre-existing cavities due to the episodic infiltration of meteoric water in a rather stable geological context.

STRATIGRAPHY AND DIAGENESIS OF THE THAMAMA‐B RESERVOIR ZONE AND ITS SURROUNDING DENSE ZONES IN ABU DHABI OILFIELDS AND EQUIVALENT OMAN OUTCROPS

We review published studies characterizing the Thamama‐B reservoir zone in the upper Kharaib Formation (late Barremian) in Abu Dhabi oilfields and at outcrops in Oman. Available data for oxygen and carbon isotope compositions, fluid inclusion measurements, cement abundance and formation water composition are interpreted in terms of a paragenetic model for the Thamama‐B in field F in Abu Dhabi where the interval is deeply buried. The present synthesis provides a useful basis for understanding and predicting reservoir quality in static models and undrilled prospects, as well as for planning promising directions for further research. The goals of this study were to summarize the geologic setting and petrology of the Thamama‐B reservoir and its surrounding dense zones, and to examine how sedimentology, stratigraphy and diagenesis have interacted to control porosity and permeability. Results that may have useful applications for similar microporous limestone reservoirs in general include: the depositional environments and stratigraphy of the subject strata; a model for how porosity variations result mainly from calcite cementation sourced from stylolites, with little dependence on lithofacies other than the localization of chemical compaction by depositional clay linked to sequence stratigraphy; the use of solidity (rock thickness with porosity removed) as a check on porosity creation by burial dissolution; observations linking high‐permeability streaks with storm lag beds and fractures; the concept of strata being gradually buried through a relatively static salinity‐stratified water column; integration of conventional and clumped stable‐isotope data with petrologic observations to constrain the timing of porosity evolution.

Ore genesis of the Chazangcuo Cu-Pb-Zn deposit in Tibet: evidence from mineralogy, fluid inclusions, S-Pb isotopes, and elemental geochemistry

The Chazangcuo copper-lead-zinc deposit (hereafter referred to as the Chazangcuo deposit) is situated in the northern portion of the western section of the Gangdese polymetallic metallogenic belt in Tibet, with ore bodies strictly governed by Linzizong Group magmatic rocks and EW-trending faults. This study aims to ascertain the mineralization periods, sources of ore-forming materials, metallogenic physicochemical conditions, and genesis of this deposit. Based on comprehensive field geological surveys, sampling, and microscopic examination of petrological and mineralogical characteristics, we perform qualitative and quantitative geochemical analyses of major elements, trace elements, and rare earth elements (REEs), fluid inclusions, and sulfur and lead isotopes. The findings reveal that the mineralization process of the Chazangcuo deposit can be divided into three periods and four stages: the magmatic-hydrothermal, hydrothermal, and supergene mineralization periods sequentially, which consist of the mineralization stages of quartz-pyrite-sphalerite, medium-low-temperature hydrothermal sulfides, chlorite-carbonate minerals, and supergene oxidation in a chronological order. The ore-forming fluids prove to be medium-low-temperature low-density fluids, and the ore-forming materials are characteristic of upper crustal-derived materials. The ore-forming environment is a medium-low mineralization temperature, a shallow and weakly reducing environment. Overall, the Chazangcuo deposit is identified as a medium-low-temperature magmatic-hydrothermal deposit. The metallogenic model has the vertical zoning characteristics of lead-zinc in the upper part and copper in the lower part.

Origin of hydrothermal dolomitization in the Huize Zn–Pb ore district, SW China: Insights from in situ U–Pb dating, fluid inclusion, and C–O–Sr–Mg isotope analyses

The temporal and genetic association between Mississippi Valley-type (MVT) Zn–Pb mineralization and hydrothermal dolomitization remains controversial. To determine the origin of hydrothermal dolomite and its genetic links with the MVT ore deposit, detailed petrographic observations and geochemical analyses were conducted on various carbonates from the giant Huize MVT Zn–Pb ore district in SW China. The following paragenetic sequence of the carbonates (from the early to late stages) was established: host limestone (ML), early diagenetic micritic dolostone (D1), late diagenetic or pre-ore fine- to medium-grained ferroan dolostone (D2) and medium- to coarse-crystalline non-ferroan dolostone (D3), pre-ore reworked D3 dolomite (D3o), ore-related void-filling dolomite cement (DC), and calcite cement (CC) related to sulfide mineralization. D2, D3, DC, and CC exhibit higher homogenization temperatures for fluid inclusion than the burial temperature, indicating a hydrothermal origin. Geochemical data indicate that D2, D3, D3o, DC, and CC display oxygen isotope depletion and radiogenic Sr isotope enrichment signatures relative to D1. Their parent fluids have more positive δ18O values and similar or lower δ26Mg values relative to those of D1 and seawater. These geochemical proxies indicate that the pre-ore hydrothermal dolomites (D2 and D3) formed from modified seawater circulated in the underlying sandstone aquifers through fault-related thermal convection. DC and CC, related to Zn–Pb mineralization, were formed by the dissolution and reprecipitation of preexisting carbonates. Sphalerite shows higher temperatures and salinities compared with D2 and D3 dolostones, indicating that the ore-forming fluid, different from the hydrothermal dolomitizing fluid, originated from a deep-sourced brine. In situ U–Pb dating of D3o reveals that the pre-ore hydrothermal dolomitization occurred at 253.7 ± 8.7 Ma, and a late-stage hydrothermal imprint occurred at 203 ± 11 Ma, likely related to tectono-thermal events, including the Emeishan large igneous province and Indosinian Orogeny, respectively. These findings imply that the hydrothermal dolomitization and Zn–Pb mineralization in the Huize ore district are likely associated with the multistage basin and basement fluid flows driven by elevated geothermal gradient and tectonic compression, respectively. The void-filling DC and CC and their cathodoluminescence characteristics are useful indicators for MVT Zn–Pb ore exploration.

Hydrothermal activity near the Permian–Triassic transition in the south‐western Ordos Basin, China: Evidence from carbonate cementation in Upper Permian sandstones

ABSTRACTCarbonate cementation in the Upper Permian sandstones informs the timing and temperature of hydrothermal activity in the south‐western Ordos Basin. This study presents a detailed examination of these hydrothermally influenced carbonate cements, constraining their age, carbonate diagenesis and relationship with regional geodynamic evolution. Sedimentological analyses demonstrate the development of deltaic plain and front sand bodies in the study area, which resulted in interbeds of volcanic matrix‐rich sandstones with matrix‐free sandstones. Petrography and electron microprobe analysis reveal four carbonate mineral growth phases of matrix‐free sandstones in the following sequence; scarce pure siderite, scarce Mg‐rich siderite, abundant blocky calcite and moderately abundant grain‐replacing calcite. The fluid inclusion data show anomalies of homogenization temperature of blocky carbonate cements during early diagenesis, over a wide range of ca 148 to 228°C. In addition, blocky carbonate cements show low δ13C (−5.9 to −13.1‰ Vienna PeeDee Belemnite) and δ18O (clustered tightly from −12.4 to −14.6‰ Vienna PeeDee Belemnite) values, interpreted to result from elevated temperatures during cementation, associated with activation of basement faults and concomitant hydrothermal fluid intrusion triggered by oceanic crust subduction in the south‐west margin of the Ordos Basin. Using in situ calcite U–Pb geochronology, the timing of hydrothermal activity was constrained to ca 247.0 ± 11 to 248.2 ± 4.7 Ma. This work provides a case study for applying intergranular calcite U–Pb dating to determine the absolute timing of fluid flow in sedimentary basins, offering tremendous potential to capture snapshots of various diagenetic evolution stages in sediments. The proposed diagenetic model can also provide new insights and understanding regarding hydrothermally influenced sediments. More importantly, hydrothermal activity may have commenced earlier than previously thought. The North Qinling Orogen uplift and associated Mianlue oceanic crust subduction may have begun at the Permian–Triassic transition with a protracted hydrothermal event in the south‐western Ordos Basin.

Origin of the Narenwula quartz vein-type W deposit, Inner Mongolia, China: Insights from geochemistry of hosting granites, fluid inclusions, H-O-S isotopes, and wolframite trace elements

Wolframite that coexists with quartz is common hydrothermal mineral in tungsten deposits, and its geochemical features can be used to constrain the tungsten mineralization. Here we show that the Narenwula deposit is a typical quartz vein-type W deposit on the northern margin of the North China Craton, Northeast China, and temporally and spatially associated with Early Cretaceous granitoids, provides an opportunity to decipher the W mineralization process. All the orebodies are composed of a series of northeast- trending wolframite-polymetallic sulfides bearing quartz veins accompanied by intense alterations, mainly hosted in the Early Cretaceous monzogranite and porphyraceous monzogranite. Three paragenetic stages were identified: (I) quartz-wolframite, (II) quartz-wolframite-sulfide, and (III) quartz-fluorite-calcite. LA−ICP−MS trace element analyses revealed that both wolframite (I) and (II) have similar trace elements, REEN patterns, and overall consistent Nb/Ta and Y/Ho ratios, indicate a single fluid source and evolution in the W mineralization of the Narenwula deposit. Fluid inclusions microthermometry of quartz and wolframite, coupled with H-O isotopes suggest that the early ore-forming fluids of the Narenwula deposit are mainly magmatic water with relatively moderate-to-high temperature and salinity, while the late ore-forming fluids are mixed with meteoric water, with medium-to low temperature and low salinity. The δ34S values of pyrite (4.63–6.65 ‰, average = 5.44 ‰) further support a magmatic origin for the sulfides. The metallogenic mechanisms at the Narenwula deposit include fluid boiling and fluid-rock interactions were the two major factors controlling the deposition of wolframite and sulfide, while simple cooling and fluid mixing may have also promoted wolframite precipitation.

Garnet as a carrier of HREEs in highly fractionated peraluminous granite: Implications for the formation of ion-absorption HREE deposits

Ion-absorption rare earth element (REE) deposits in South China are the world’s most important source of heavy REEs (HREEs). These deposits were formed by the weathering of granitic rocks whose formation involved primary HREE enrichment. Previous studies have identified the key role of late-stage magmatic evolution, especially the magmatic–hydrothermal transition stage played in HREE enrichment, but the detailed processes need further investigation. Garnet is a common HREE carrier in parent rocks and also a main contributor of these elements in formation of ion-absorption HREE deposits. Here, we investigate textural and compositional variations in garnets from parent rock (muscovite granite) of the Dabu ion-absorption HREE deposit to constrain the primary HREE enrichment of the parent rock during late-stage magmatic evolution. Mass-balance calculations reveal that garnet accounts for ∼67 % of the Y and 64 % of the REEs in the Dabu muscovite granite. The garnets can be classified into three types: i) magmatic garnets (Grt-1A) are intergrown with plagioclase, K-feldspar, and quartz, host both melt and mineral inclusions, and have high REE + Y contents (6488–19,215 ppm); ii) magmatic–hydrothermal garnets (Grt-1B) occur as overgrowths on Grt-1A, host both melt and fluid inclusions, and have intermediate REE + Y contents (2681–8683 ppm); and iii) hydrothermal garnets (Grt-2) are intergranular with quartz and altered biotite, host primary fluid inclusions, and have the lowest REE + Y contents (476–1247 ppm). The texture and composition of the three types of garnet indicate that the magma have undergone a transition from a volatile-undersaturated to a volatile-oversaturated aqueous system. The fluid, from which some REE minerals precipitated, present in the magma system was derived from the magma itself rather than from an external source, as evidenced by the similarity in Nd isotopic composition between the REE minerals and the whole-rock samples. During this transition, the presence of high-HREE garnet prevents the HREE partitioning into refractory minerals (e.g., zircon, REE-bearing phosphate) or extracting from the magma system by the fluid. Our findings show that granites containing high-HREE garnet have high potential for forming ion-absorption HREE deposits and that garnet can reliably record their magmatic evolution.

Флюидный режим образования вторичных доломитов в палеозойских карбонатных коллекторах Хасырейского месторождения (вал Гамбурцева)

The search for hydrocarbon deposits in the sediments of the Lower Paleozoic complex of the Timan-Pechora oil and gas province, which are associated with the main prospects for increasing reserves, is a relevant topic for research. It is necessary to understand the formation processes of carbonate reservoirs within the complex under consideration to develop a strategy for predicting the structure of the complex reservoirs. Obtaining data on the parameters of the fluid regime of the formation of secondary dolomites in the Paleozoic carbonate reservoirs of the Khasyrey field (Gamburtsev swell) was the aim of the study. We studied primary fluid inclusions in dolomite and anhydrite cements filling vuggy voids in reservoir rocks. We showed that the inclusions contained up to 10 vol. % of the gas phase, which was represented by methane and water vapor. The liquid phase was characterized by a substantially chloride-calcium composition, the salinity is 13.5–23.5 wt. % NaCl-eq. These data might indicate the formation of cavities and cements of secondary dolomites from moderate-temperature solutions of high salinity, which were formed as a result of mixing sedimentation (primary marine) waters and brines of hydrothermal vents. The products of evaporite dissolution in the presence of hydrocarbons and sulfate reduction processes were the most likely source and supplier of the fluids, both the formation of leaching caverns in the rock and the cements performing them. Fluids could enter the upper floors of the section from hydrothermal sources in the basement zones and lower horizons of the sedimentary cover through a system of faults and cracks during tectonic activation.

Genesis and fluid evolution of the Hatu orogenic gold deposit in the West Junggar, Western China

The West Junggar in Xinjiang, western China, represents a significant gold mineralization belt hosting over 200 gold deposits, with the Hatu gold deposit being the largest among them. In this study, ore geology and fluid inclusion assemblages of quartz samples from the Hatu gold deposit were investigated in an effort to clarify the mineralization process and its relationship with the geodynamic settings. The mineralization process is delineated into early (pyrite-albite-quartz veins), middle-a (quartz-ankerite veins), middle-b (quartz-ankerite-sulfide-native gold veins), and late (quartz-calcite veins) stages. The early stage veins suggest a compressional setting while the middle-a and middle-b stage veins suggest a tensional shear setting. The late stage veins are typically filled fissures cutting through earlier veins. Scanning electron microscope-cathodoluminescence (SEM-CL) reveals that early stage quartz (Q1) exhibits concentric CL-oscillatory growth zoning, while middle-a stage quartz (Q2a) displays unidirectional zoning and ranges from CL-bright to CL-dark, middle-b stage quartz (Q2b) is CL-bright and weakly zoned, and late-stage euhedral quartz (Q3) shows sector zoning transitioning from CL-gray to CL-dark. Quartz that formed in these stages developed three types of fluid inclusions: pure CO2 (PC-type), CO2–H2O (C-type), and H2O–NaCl (W-type). The early stage quartz contains C- and W-type fluid inclusions homogenizing at 309–345 °C, while the late stage quartz contains only W-type fluid inclusions with homogenization temperatures of 164–229 °C. Microthermometry of fluid inclusion indicated the evolutionary of the metallogenic fluid from a high-temperature, CO2-rich, and minor CH4 metamorphic fluid to a low-temperature, CO2-poor meteoric fluid. From the early to middle-a stages, fluid boiling caused the unloading of ore-forming elements whereas fluid mixing led to the precipitation of polymetallic sulfides and gold in the middle-b stage. Trapping pressures in the middle-b stage were estimated using C-type inclusions, illustrating that gold mineralization took placed at depth of 8.0 km. We propose classifying the Hatu gold deposit as an orogenic deposit, originating from the collisional orogenesis between the Yili-Kazakhstan and Siberian continents in the Late Carboniferous.

Combined effect of magmatic fluid–seawater mixing and host rock alteration on the formation of gold-enriched massive sulfides in the Forecast vent field, southern Mariana Trough

Massive sulfides and sulfide-bearing breccia were collected from the Forecast vent field in the southern Mariana Trough. These samples exhibit varying degrees of hydrothermal alteration and/or mineralization, with the former type having significant enrichments in Au (up to 101 ppm). In this study, detailed analyses of mineralogy, geochemistry, S isotope, and fluid inclusion were conducted to understand the unusual Au-rich mineralization. Mineralogical investigations and geochemical analyses (LA–ICP–MS and EPMA) of dominant sulfide minerals indicate that electrums, the main phase of Au mineralization, are characterized by two different generations based on mineralogical relationships and fineness. Early-stage high fineness electrums (930–981 ‰) are associated with sphalerite under relatively high-temperature fluid conditions, whereas galena is main host mineral related to late-stage low fineness electrums (773–868 ‰). Sphalerite geothermometry (231–264 °C), the occurrence of colloform textured sulfides, and microthermometric characteristics of fluid inclusions (Th = 220–304 °C; Salinity = 1.4–6.6 wt% NaCl equivalent; a general trend of decreasing salinity with decreasing Th) indicate that significant decreases in H2S activity, attributed to seawater dilution and rapid precipitation of sulfide minerals, facilitated the efficient destabilization and deposition of Au transported as sulfide complexes from hydrothermal fluids. In particular, the lower 34S values (+0.2 ‰ to + 1.3 ‰) of sulfides compared to those of arc/back-arc lavas (δ34S = +5‰ to + 11 ‰), along with the prevalence of CO2 in the vapor phase of fluid inclusions, reflect that the significant contribution of magmatic volatile influx supplied most of the sulfur and metals (including Au) to the Forecast hydrothermal fluids. Additionally, the abundance of montmorillonite and varying proportions of sulfide and gangue minerals observed in hydrothermal samples suggest that the chemical buffering of fluids by associated substrates and/or sediments could be another significant factor in promoting Au-rich mineralization. Therefore we conclude that the combination of magmatic fluid–seawater mixing and host rock alteration plays an important role in the formation of Au-enriched massive sulfides in the Forecast vent field.

Heavy halogen compositions of peridotite massifs in the Ivrea-Verbano Zone and implications for strong modification of mantle rocks

The lithospheric mantle affected by metasomatism is an important reservoir for halogens and often preserves significant heterogeneity in halogen abundances. However, the halogen compositions of the non-metasomatized mantle rocks with depleted geochemical features have not been well studied, impeding a comprehensive understanding of the halogen distribution in the mantle. The Balmuccia (BM) and Baldissero (BD) peridotite massifs in the Ivrea-Verbano Zone, Italian Alps, represent fragments of the sub-continental lithospheric mantle (SCLM) that are fresh and devoid of subduction-related mantle metasomatism. Here we examine the heavy halogen contents of well-characterized spinel-facies mantle peridotites (n = 20) and pyroxenites (n = 16) from the BM and BD massifs. The results indicate significant variation in whole rock halogen contents of peridotites and pyroxenites, with chlorine (Cl) ranging from <30 to 244 μg/g, bromine (Br) from <0.10 to 0.94 μg/g, and iodine (I) from <0.015 to 0.12 μg/g. Some peridotites and pyroxenites show rather low halogen contents (below the detection limit), consistent with their depleted features. However, a large number of samples display halogen contents far higher than the depleted MORB mantle (i.e., Cl: 3–10 μg/g) and peridotite xenoliths from the strongly metasomatized mantle, although ∼30 % of the halogens were leached out by ultrapure water or dilute nitric acid. The data suggest variable halogen enrichment in many mantle rocks. The halogen contents of different types of mantle rocks do not vary with major elements and incompatible trace elements (e.g., Nb), indicating that halogen compositions are not controlled by magmatic processes such as melting and melt-peridotite reaction. Instead, secondary fluid inclusions are abundant and mainly distributed as trails within olivine and pyroxene in both peridotites and pyroxenites, which were likely trapped during the exhumation of these mantle rocks. Their elevated halogen/Nb ratios compared with MORB mantle and strong correlations with Ba/Nb support the effect of fluids. Micro-Raman analyses identify hydrous serpentines within fluid inclusions. Moreover, mass balance calculation indicates that halogen enrichment is mainly caused by secondary fluids (> 90 %). Together, our findings highlight that the fluid percolation in the mantle rocks during exhumation can intensely modify the halogens, to a similar degree as mantle metasomatism, suggesting the sensitivity of halogens to secondary modification.

Metallogenic model of the Lykling ophiolite-hosted lode Au deposit, Scandinavian Caledonides: Insight from fluid inclusions, mineral chemistry and stable isotope geochemistry

The Lykling lode Au deposit represents a unique example of gold mineralization in the Upper Allochthone of the Scandinavian Caledonides. The mineralization is hosted by the Early Ordovician Lykling Ophiolite Complex and the intruding trondhjemite unit and spatially associated with two generations of mafic dykes that crosscut both the ophiolitic complex and trondhjemite. Field observations indicate that the mafic dykes did not play an active role in the emplacement of Au at Lykling, however their contacts with the immediate host rocks (i.e., gabbro and trondhjemite) may have focused ore-forming fluids.Three main stages in the evolution of the hydrothermal system in the Lykling area are documented by two generations of auriferous quartz veins: 1) older quartz-carbonate veins hosted by moderately angled brittle-ductile shear zones and 2) younger quartz-sulfide veins that fill steeply dipping brittle faults. Stage 1 resulted in deposition of barren quartz and gold-free pyrite from moderately saline NaCl-CaCl2-H2O ± CO2 fluids at temperatures between ∼310–330 °C and pressures in the range from 2.7 to 3.5 kbars. Under the given physicochemical conditions Au was mobile in the form of its chloride complexes. Stage 2 is associated with multiple episodes of ductile deformation punctuated by concomitant brecciation reflecting brittle-ductile transition processes. Fluid inclusion data reveals a decrease in temperature and pressure that may result in the formation of stable Au-bisulfide complexes and making the hydrothermal mobility of Au sensitive to changes in pressure. Consequently, the fluctuation in pressure controlled by the development of brittle-ductile structures likely resulted in the precipitation of native gold in quartz veins. Stage 3 represents a pure brittle event which is accompanied by a significant decrease in the fCO2/fS2 ratio. Mixing of higher-temperature and moderate-salinity fluids with cooler fluids has been recognized as the principal trigger for deposition of sulfides and a paragenetically late phase of native gold in the Lykling hydrothermal system.The Lykling ophiolite-hosted lode Au deposit shows numerous similarities with orogenic gold deposits elsewhere, including structural controls during mineralizing events, deposition from moderately to low salinity CO2-bearing aqueous solutions, deposition from a focused fluid flow along trans-crustal fault zones with a mixed brittle-ductile character and the spatial association with regionally metamorphosed terranes. In contrast to the great majority of the known orogenic gold deposits, the Lykling ophiolite-hosted lode Au deposit records a magmatic origin of volatiles. Therefore, taking into consideration field relationships and the regional setting of the Lykling deposit, we argue that its formation is concomitant with emplacement of the Sunnhordland Batholith during post-collisional thinning of the crust and associated localized uplift within the Lykling Ophiolite Complex.

Unraveling the genesis of wolframite mineralization in the West Qinling Belt, China: Evidence from geochronology, geochemistry, and fluid inclusion study

The West Qinling Belt is a pivotal part of the Central China Orogenic Belt renowned for producing abundant Au-polymetallic deposits. Nonetheless, reports of wolframite mineralization within this region were absent. The Xuehuashan deposit is the premier documented quartz-vein type wolframite deposit in West Qinling, which has significant implications of W mineralizing potential in the West Qinling Belt. The ore bodies are predominantly composed of wolframite-quartz veins and/or veinlets which are proximal or within the Late Triassic Baijiazhuang granitoid. To elucidate the age and genesis of the Xuehuashan wolframite mineralization, we presented analyses of U-Pb dating and chemical composition on wolframite, fluid inclusion study, and hydrogen–oxygen isotopes on wolframite and quartz. The Xuehuashan wolframite U-Pb dating yielded an age of 213.0 ± 6.7 Ma, which is consistent with the age of the Baijiazhuang granitoid. The correlation among trace elements and the Y/Ho vs. Zr/Hf diagram suggests trace elements in wolframite were influenced by crystalline chemical factors and the geochemistry of parental ore-forming fluid. Homogeneous texture and stable chemical composition of wolframite, as well δD vs. δ18O isotopes, suggest a single magmatic fluid from the Baijiazhuang granitoid. Fluid inclusions in wolframite and quartz have high homogenization temperatures and varying salinities of 0.4 – 16.4 wt%, suggesting that intense decompression and fluid boiling during fracture open caused the wolframite precipitation. Compared with the Late Triassic granitoids in the Qinling Belt, the Baijiazhuang granitoid shows higher ratios of Rb/Sr and lower ratios of Zr/Hf, K/Rb, Nb/Ta, LREE/HREE, as well as negative Eu anomalies, which are consistent with the W-related highly evolved granitoids but distinct to W-barren granitoids. Hence, this study highlights W mineralization potential in the Qinling belt associated with the highly evolved Late Triassic granitoids.

Fluid flow in the Katanga Supergroup: From Lufilian brittle tectonic stages to the post-Lufilian period (Democratic Republic of Congo)

The metasedimentary rock succession of the Neoproterozoic-Cambrian Katanga Supergroup in the Central Africa Copperbelt shows evidence of several complex tectonic events. The deformation of this supergroup started from the tectonic inversion at about 570 Ma and lasted up to today, but reached paroxysm at ∼550 Ma. This long period was characterized by folding and faulting throughout multiple compressive and extensional events, which controlled the regional fluid flow on the one hand, and played an important role during formation of the stratiform to stratabound Cu-Co (Ni, U) deposits and the polymetallic Cu-Zn-Pb (Ag, Ge, Mo, Cd) vein type deposits on the other hand. Based on the structural analysis and paleostress reconstruction, coupled with fluid inclusion characterization from mineralized structures in rocks from the Nguba, Kundelungu and Biano Groups, this study demonstrates that the composition of hydrothermal fluids changed during brittle tectonic deformation during the Lufilian orogeny and subsequent uplift and post-Lufilian faulting.During early brittle tectonic deformation along strike slip faults with sinistral and dextral movement related to a NE-SW transpression, the Cu-mineralizing fluid was hypersaline (27.9–31.1 eq. wt% NaCl) with moderate temperatures (Th = 128–216 °C). The subsequent Cu or Cu (Zn, Pb) mineralization formed within an E-W extensional stress regime, related to the late Lufilian orogenic collapse. The fluid inclusions present in the gangue minerals associated with this latter mineralization show a large range in Th (50–264 °C) and salinity (26.7–36.0 eq. wt% NaCl). The decrease in temperature is interpreted to be due to migration of the fluids at shallower depth in the subsurface after uplift and erosion of the orogen. The increased salinity of the fluid is related to the dissolution of evaporites, mainly NaCl. A second H2O-NaCl-CaCl2 fluid with a homogenization temperature below 55 °C has also been found associated with this brittle stage and mineralization phase, but only in rocks belonging to the Kundelungu Group. A third mineralization phase, also characterized by Cu or Cu (Zn, Pb), formed during the post-Lufilian period within a NW-SE transpressional inversion regime. The fluid inclusion in the gangue minerals of this mineralization phase have a smaller range in homogenization temperature (Th = 37–172 °C) and the largest range in salinity (0.71–30 eq. wt% NaCl), compared to the earlier fluid inclusions generations. This large range in salinity may be explained by the mixing of a high salinity fluid, already present during the earlier tectonic stages in the sedimentary basin, with meteoric water. During the more recent rift-related extension, a fluid with again a large and higher range in homogenization temperatures (Th = 47–257 °C) and with a typical low salinity (<10 eq. wt% NaCl) has been recognized in minerals filling NNE-SSW to NE-SW oriented faults and fractures. The upward migration of a relatively low-salinity fluid from deeper parts in the subsurface explains the variation in the temperatures observed with this tectonic event.

Deformation and fluid flow history of a fractured basement hydrocarbon reservoir below the Sab'atayn Basin, Habban Field, Yemen

Fractured crystalline basement reservoirs are of increasing economic interest for oil and gas exploration and subsurface fluid storage. The successful characterization of these reservoirs is commonly challenged by their structural heterogeneity, complexity in fracture distribution and flow properties at multiple scales, and the difficulty of imaging fractures in exploration seismic. We analyzed the fracture geometry and fracture diagenetic attributes in two oriented cores from the Habban Field in the Late Jurassic Sab'atayn Basin (Yemen) to evaluate the multi-phase deformation history and fracture flow pathway evolution for (hydrothermal) fluids and hydrocarbons. Analyses included petrographic and fluid inclusion analysis of fracture-filling cements, and stable sulfur isotope analyses of fracture-filling pyrite.The Paleoproterozoic basement consists of amphibolite-facies metamorphic ortho- and paragneiss cut by several phases of Neoproterozoic granitoid intrusions. The investigated lithologies in the drill cores comprise (1) epidote quartzite, (2) amphibolite, (3) monzogranite, (4) meta-arkose, and (5) quartz-feldspar porphyry. These lithologies show an inhomogeneous fracture network that is partially cemented. Ediacaran brittle-ductile deformation (D1) recognized only within a Pan-African monzogranite lead to cataclasis and porosity generating alteration. Late Jurassic – Early Cretaceous extension (D2) related to the break-up of Gondwanaland and the formation of the Sab'atayn Basin is found in all lithologies and likely resulted in pervasive quartz cementation. Late Jurassic fractures parallel to the NW-SE trending long axis of the Sab'atayn Basin are best recognized in a strongly foliated amphibolites. Cenozoic extensional fracturing (D3) reactivated older structures, which probably formed during activity of the Neoproterozoic Najd Fault System and caused multi-phased (pyrite-(saddle) dolomite-calcite) fracture cementations. The sulfur isotope compositions of pyrite with δ34S values ranging between −17.4 and + 26.4‰ vs. V-CDT reflects the variability of the fluid source during sulphide mineral formation from hydrocarbon-rich hydrothermal solutions. Fluid inclusions indicate that cementation reactions occurred in a relatively narrow temperature field between 120 °C and 140 °C, ideal for hydrocarbon maturation. Our results demonstrate the potentially complex charge history of basement reservoirs, involving multiple phases of fracture formation and cementation, and fluid charge episodes.

Fluid evolution of the Nulasai Cu deposit, Xinjiang, NW China: Evidence from fluid inclusions and O-H-C isotopes

The Nulasai deposit is the earliest Cu mine in Xinjiang, NW China, and has been mined and smelted since the warring state period. Another striking characteristic of the deposit is the high-grade (ave. 1.34 % Cu) with bornite, chalcopyrite and chalcocite as main ore minerals. Through a field and petrographic investigation, three phases of hydrothermal evolution have been recognized at the Nulasai Cu deposit, including the stage I magnetite – quartz ± chalcopyrite ± bornite veins, the stage II calcite – barite ± chalcopyrite ± chalcocite ± pyrite ± bornite veins, and the stage III calcite – barite ± chalcopyrite ± sphalerite ± pyrite ± galena veins. Fluid inclusions of the stage I veins were captured under two-phase condition indicates that existence of both contemporaneous daughter mineral-bearing and liquid-rich fluid inclusions; they have an intermediate-high salinity (11.5 ∼ 38.5 wt% NaCl equiv) and homogenization temperature (266 ∼ 376 °C), with entrapment pressures from 47 to 167 bar (depth of approximately 0.5 to 1.7 km). The coexistence of vapor-rich and liquid-rich fluid inclusions was a defining feature of the stage II fluid inclusions, and they have an intermediate salinity (6.2 ∼ 10.7 wt.%NaCl equiv) and homogenization temperature (211 ∼ 287 °C), with entrapment pressures from 18 to 70 bar (depth of approximately 0.2 to 0.7 km). Fluid inclusions of the stage III veins were captured under two-phase condition, and intermediate-low salinity (3.2 ∼ 9.2 wt.%NaCl equiv) and homogenization temperature (155 ∼ 241 °C), with entrapment pressures of 6 to 32 bar (depth of 0.1 to 0.6 km). According to the stable isotope (O-H-C) data for the three mineralization phases, magmatic water containing organic carbon made up the majority of the early ore-forming fluids, whereas abundant meteoric water has been involved during the late stage of mineralization. Therefore, we suggest that fluid mixture between magmatic water and meteoric water may have led to simultaneous decrease of fluid temperature, salinity and their stable isotope values, and finally facilitates the Cu ore precipitation. This study emphasizes how high-grade Cu deposition in orogenic belts is initiated by fluid dilution.