Flp Recombinase Mediated Cassette Exchange Research Articles

PO-221 Mouse models of lung squamous cell carcinoma for preclinical intervention studies

IntroductionLung squamous cell carcinoma (LSCC) is a lethal disease accounting for 30% of all lung cancer cases. Currently, there are no effective treatments: patients are treated with a combination of surgery, chemotherapy and radiotherapy. So far numerous high-throughput screenings have been carried out in order to identify the representative mutations of this tumour. Their contribution is precious but remains descriptive.Material and methodsMice were engineered by using Flp-Recombinase mediated cassette exchange technology in ES cells. Mutations were activated by Intratracheal injection of adenoviruses carrying Cre recombinase under different promoters.Genome profiling and histological analysis were performed on lung isolated from mice that showed signs of distress due to tumour development.Results and discussionsWe published that mice carrying SOX2 over-expression combined with PTEN and CDKN2AB loss (hereafter SOX2PC) developed central and peripheral LSCC according to the targeted cell-of-origin, fully mimicking the human counterpart.To examine gene contribution, we uncoupled the inactivation of tumour suppressor genes and found that mice defective either of PTEN or CDKN2AB in combination with SOX2 over-expression, only showed epithelial hyperplasia, indicating that the combination is necessary for the tumour to progress.In order to use SOX2PC autochthonous model for intervention studies, we attempted at reducing tumour latency by combining other oncogenes with SOX2 over-expression. Our data pointed at FGFR1 and NFE2L2 as candidate drivers of human LSCC. Surprisingly, FGFR1-SOX2PC mice were resistant to tumour formation, indicating that FGFR1 downstream pathways may be detrimental to squamous differentiation. However, NFE2L2, a transcription factor involved in the anti-oxidant pathway and found altered in 12% of human LSCC cases, strongly enhanced tumour progression without affecting the overall tumour morphology. Most importantly, in both NFE2L2-SOX2PC and SOX2PC mice, we observed a highly immunogenic microenvironment, as reported for human patients, with high level of PD-L1 and extensive immune infiltrations of leukocytes mostly of myeloid lineage.ConclusionOur data show that neoplastic squamous differentiation is strongly associated to the oncogenic activation of SOX2. Concomitant activation of the anti-oxidant pathway accelerates tumour progression, making NFE2L2-SOX2PC autochthonous model, with its characteristic immunophenotype (massive myeloid immune infiltrations) suitable for a diversity of intervention studies.

A method for specifically targeting two independent genomic integration sites for co-expression of genes in CHO cells

Stable mammalian production cell lines in suspension culture enable the reproducible expression of target genes in any desired scale using bioreactor technology. Targeted integration methods have been developed to cut down timelines for the generation of stable producer cell lines. The powerful Flp recombinase mediated cassette exchange (RMCE) technique allows fast integration of target genes in preselected and optimized high expression loci in so called master cell lines. Up to now, these cells only enable the expression from a single locus. Here, we describe the set-up required for the generation of multiple tagged master cell lines on the example of a binary RMCE expression system in the glycosylation mutant CHO Lec3.2.8.1 cell line. We show how this technology is used for the expression of proteins from multiple loci by generating a binary RMCE expression system. The tools and strategy for the construction of binary master cell lines with different combinations of expression level are described in detail. The binary production cell lines show independent expression of the individual exchange loci of the producer cell lines. The expression level for the model protein tdTomato is the cumulative expression for the chosen combination of the expression loci of the master cell line. This binary RMCE expression system can be further developed to a multi RMCE expression system for co-expression of protein complex subunits with predetermined expression ratio of each individual exchange locus.

Modified Lentiviral LTRs Allow Flp Recombinase–mediated Cassette Exchange and In Vivo Tracing of “Factor-free” Induced Pluripotent Stem Cells

Methods for generating induced pluripotent stem cells (iPSCs) for disease modeling and cell therapies have progressed from integrating vectors to transient delivery of reprogramming factors, avoiding permanent genomic modification. A major limitation of unmodified iPSCs is the assessment of their distribution and contribution to adverse reactions in autologous cell therapy. Here, we report that polycistronic lentiviral vectors with single Flp recombinase (Flp) recognition target (FRT) sites can be used to generate murine iPSCs that are devoid of the reprogramming cassette but carry an intergenic 300-bp long terminal repeat sequence. Performing quantitative polymerase chain reaction on this marker, we could determine genetic identity and tissue contribution of iPSC-derived teratomas in mice. Moreover, we generated iPSCs carrying heterospecific FRT twin sites, enabling excision and recombinase-mediated cassette exchange (RMCE) of the reprogramming cassette for another expression unit of choice. Following screening of iPSCs for "safe harbor" integration sites, expression cassettes were introduced by RMCE into various previously silenced loci of selected single-copy iPSCs. Analysis of DNA methylation showed that RMCE reverted the local epigenetic signature, which allowed transgene expression in undifferentiated iPSCs and in differentiated progeny. These findings support the concept of creating clonotypically defined exchangeable and traceable pluripotent stem cells for disease research and cell therapy.

Streamlining Homogeneous Glycoprotein Production for Biophysical and Structural Applications by Targeted Cell Line Development

Studying the biophysical characteristics of glycosylated proteins and solving their three-dimensional structures requires homogeneous recombinant protein of high quality.We introduce here a new approach to produce glycoproteins in homogenous form with the well-established, glycosylation mutant CHO Lec3.2.8.1 cells. Using preparative cell sorting, stable, high-expressing GFP ‘master’ cell lines were generated that can be converted fast and reliably by targeted integration via Flp recombinase-mediated cassette exchange (RMCE) to produce any glycoprotein. Small-scale transient transfection of HEK293 cells was used to identify genetically engineered constructs suitable for constructing stable cell lines. Stable cell lines expressing 10 different proteins were established. The system was validated by expression, purification, deglycosylation and crystallization of the heavily glycosylated luminal domains of lysosome-associated membrane proteins (LAMP).

Towards rational engineering of cells: Recombinant gene expression in defined chromosomal loci

The strength of recombinant gene expression is a key property of cell lines for biopharmaceutical protein production. In most stable cell lines the expression vector is stably introduced into the host chromosomal DNA. Apart from the copy number and the used expression control elements the performance of recombinant expression vectors is modulated by genetic and epigenetic features provided by flanking host elements. Since targeted integration is very difficult cell clones with high expression of a recombinant vector are created by random integration and large scale screening for gene expression. This allows the isolation of those rare recombinant cells in which gene expression is optimal. This is usually due to locus-specific influences of the chromosomal surroundings. We have developed an efficient methodology for targeting expression cassettes to specific chromosomal sites [1,2]]. The method (Flp recombinase mediated cassette exchange - RMCE) allows the repeated use of defined loci by targeting constructs for expression of proteins and viruses, thereby allowing to exploit the positive features of a given integration site [3,4]]. Thereby, a systematic evaluation of the performance of a set of expression vectors in various chromosomal sites becomes feasible. In this study we screened for high performance integration sites in HEK293 and CHO-K1 cells supporting expression cassettes driven by a potent promoter. As a read out, production of antibodies and recombinant retroviral vectors were used. Thereby, we could show that high level expression of a given promoter is restricted to defined integration sites, while other sites show only moderate expression (data not shown). An important new finding was that a given chromosomal site is not flexible with respect to the integrated cassette but requires the integration of specific promoters. As illustrated in figure ​figure1,1, an integration site, identified for supporting high level expression of an SV40 promoter driven cassette fails to adequately support expression of MPSV and adenoviral major late promoter (AdmlP). Vice versa, another site, initially screened for supporting MSCV promoter expression, could restore expression of the highly homologous MPSV promoter while the SV40 promoter and the AdmlP promoter give only moderate expression. Figure 1 Mode of tagging defines the optimal targeting cassette. Two highly potent chromosomal integration sites were screened upon random integration of an expression cassette driven by the SV40 promoter and the MSCV promoter, respectively. By means of Flp recombinase ... Finally, we tested the impact of the orientation of the cassette in a specific chromosomal site. We found that some integration sites are flexible with respect to the orientation of the expression cassettes while others support expression only in one direction (data not shown). While classical enhancer elements are known to activate promoters largely independent from the relative position this finding suggests that other cis acting elements affect the incoming cassettes in an orientation dependent manner. Together, this shows that not the nature of integration site and the design of the vector as such define the performance of a producer cell clone. Rather, the interplay between these components defines the level and stability of expression. Since these interactions cannot be predicted, the performance of a vector in a given site has to be evaluated empirically. In order to exploit favourable sets of chromosomal sites and vectors we made use of bacterial artificial chromosome (BAC) vectors. By recombineering, expression cassettes were integrated into pre-selected chromosomal sites as encoded by BAC vectors. These vectors were randomly integrated into cells by standard transfection protocols. Clones were isolated and evaluated for expression. As expected, highly reproducible expression characteristics were found in individual clones (data not shown). In conclusion, the definition of favorable combinations of specific integration sites and vector design allow the rational exploitation of given chromosomal sites. For this purpose, technologies for site specific genetic manipulation of mammalian cells are essential. This concerns both targeted integration of expression cassettes into defined loci (such as RMCE or site specific nuclease induced homologous recombination) or by transduction of large chromosomal domains (as provided by BAC vectors). These technologies pave the way for predictable and high expression of biotechnologically relevant products such as antibodies and recombinant viral vectors.

Recombinant protein expression by targeting pre-selected chromosomal loci

BackgroundRecombinant protein expression in mammalian cells is mostly achieved by stable integration of transgenes into the chromosomal DNA of established cell lines. The chromosomal surroundings have strong influences on the expression of transgenes. The exploitation of defined loci by targeting expression constructs with different regulatory elements is an approach to design high level expression systems. Further, this allows to evaluate the impact of chromosomal surroundings on distinct vector constructs.ResultsWe explored antibody expression upon targeting diverse expression constructs into previously tagged loci in CHO-K1 and HEK293 cells that exhibit high reporter gene expression. These loci were selected by random transfer of reporter cassettes and subsequent screening. Both, retroviral infection and plasmid transfection with eGFP or antibody expression cassettes were employed for tagging. The tagged cell clones were screened for expression and single copy integration. Cell clones producing > 20 pg/cell in 24 hours could be identified. Selected integration sites that had been flanked with heterologous recombinase target sites (FRTs) were targeted by Flp recombinase mediated cassette exchange (RMCE). The results give proof of principle for consistent protein expression upon RMCE. Upon targeting antibody expression cassettes 90-100% of all resulting cell clones showed correct integration. Antibody production was found to be highly consistent within the individual cell clones as expected from their isogenic nature. However, the nature and orientation of expression control elements revealed to be critical. The impact of different promoters was examined with the tag-and-targeting approach. For each of the chosen promoters high expression sites were identified. However, each site supported the chosen promoters to a different extent, indicating that the strength of a particular promoter is dominantly defined by its chromosomal context.ConclusionRMCE provides a powerful method to specifically design vectors for optimized gene expression with high accuracy. Upon considering the specific requirements of chromosomal sites this method provides a unique tool to exploit such sites for predictable expression of biotechnologically relevant proteins such as antibodies.

The use of recombinase mediated cassette exchange in retroviral vector producer cell lines: Predictability and efficiency by transgene exchange

Currently, retroviral vector producer cell lines must be established for the production of each gene vector. This is done by transfection of a packaging cell line with the gene of interest. In order to find a high-titer retroviral vector producer clone, exhaustive clone screening is necessary, as the random integration of the transgene gives rise to different expression levels. We established a virus producing packaging cell line, the 293 FLEX, in which the viral vector is flanked by two different FRT sites and a selection trap. Using Flp recombinase mediated cassette exchange; this vector can be replaced by another compatible retroviral vector. The first step was the tagging of 293 cells with a lacZ reporter gene, which allowed screening and choosing a high expressing chromosomal locus. After checking that, a single copy of the construct was integrated, cassette exchangeability was confirmed with a reporter targeting construct. Subsequently gag-pol and GaLV envelope genes were stably transfected. The lacZ transgene was replaced by a GFP transgene and the 293 FLEX producer cell line maintained the titer, thus validating the flexibility and efficacy of this producer cell line. The tagged retroviral producer cell clone should constitute a highly advantageous cell line since it has a predictable titer and can be rapidly used for different therapeutic applications.