Florisil Solid-phase Extraction Research Articles

A comparison of the determination of multiple pesticide residues in fruits, vegetables, and edible fungi using gas chromatography combined with filtration purification and solid-phase extraction.

The multiplug filtration clean-up (m-PFC) and solid-phase extraction (SPE) pretreatment methods were employed to process 8 representative matrices in fruits, vegetables, and edible fungi, respectively. 37 pesticide residues were determined using gas chromatography equipped with ECD and FPD detectors. The measurement data were compared and analyzed following m-PFC purification and gas chromatography analysis, and both accuracy and precision met the (EU) 2021/808 requirements, achieving recovery rates for the 8 matrices ranging from 67.0% to 112.8% (averaging over 83.8% recovery), and RSDs between 0.2% and 15.2%. The 37 pesticides exhibited good linearity between 0.05 and 1.6 μg mL-1, and the matrix effect was found to be weaker compared to that of the Florisil solid-phase extraction method. The detection limits ranged from 0.0001 to 0.03 μg kg-1, with 31 pesticides showing lower detection limits compared to the SPE method. The application of this method to 150 real samples resulted in the detection of 17 pesticides across all samples. Fewer pigments were detected in m-PFC purified solutions compared to Florisil PR SPE when analyzed by liquid chromatography. m-PFC achieved more thorough adsorption of endogenous substances like pigments, reducing instrument contamination, utilizing less organic solvent, and simplifying the operation. This purification step offers clear advantages, allowing for the processing of larger sample batches in a short time. It can serve as a replacement for SPE methods like Florisi PR in batch detection of fruit and vegetable samples.

New pretreatment method for detecting petroleum hydrocarbons in soil: silica-gel dehydration and cyclohexane extraction

Oil is a primary source of energy worldwide. However, the use of oil produces large amounts of pollutants, which are detrimental to the environment. The presence of petroleum hydrocarbons in soil is a critical marker of environmental pollution and safety. Rapid on-site detection technology has been broadly used in emergency tracking, offering critical information support for effective reactions to environmental emergencies. Thus, it is expected to play an increasingly critical role in environmental remediation efforts. The current approach for petroleum hydrocarbon detection in soil mainly involves Soxhlet extraction with a combination of solvents, including acetone and n-hexane. The samples are then analyzed after rotary evaporation, dehydration with anhydrous sodium sulfate, and purification using a magnesium silica-type adsorbent. Unfortunately, this approach requires sample analysis to be performed in the laboratory, which is tedious and time consuming, and consumes large amounts of solvents. Moreover, the rotary evaporator is not portable. Therefore, this method is not appropriate for the rapid on-site detection of petroleum hydrocarbons. In this study, a rapid on-site detection method based on silica-gel dehydration and cyclohexane extraction was developed for the extraction and pretreatment of petroleum hydrocarbons (C10-C40) in soil. First, an appropriate amount of silica gel was added to the soil, and the mixture was completely ground to eliminate moisture. Next, petroleum hydrocarbons were extracted with 40 mL of cyclohexane, and the extract was cleaned by Florisil solid-phase extraction (SPE) column elution. Finally, the samples were analyzed by gas chromatography (GC) to evaluate the above method. The silica gel exhibited optimal adsorption properties compared with anhydrous sodium sulfate, calcium oxide, and molecular sieves, with recovery of 87.5%. The effects of different soil water content (5%, 10%, and 20%) and silica gel (1, 3, 5, and 10 times the moisture content) dosage on the extraction of petroleum hydrocarbons were investigated. The recoveries of petroleum hydrocarbons increased from 74.0% to 103.8% after 15 min of invasive extraction (relative standard deviation, RSD, <10.1%) when silica gel amounting to 10 times the moisture content was used. Five types of silica gels with different properties were purchased from four manufacturers, and the effects of these silica gels on the dehydration and extraction efficiency of petroleum hydrocarbons in soil were assessed. The results showed that amorphous silica gel led to low recoveries (<60%), spherical silica gel achieved extraction efficiencies of approximately 70%-90%, and alkaline silica gel produced recoveries with poor precision. Therefore, neutral spherical silica gel was used for further experiments. The fingerprints of petroleum hydrocarbons with different carbon numbers are an important reference for identifying pollution sources. Thus, ensuring good recoveries throughout the entire carbon range is necessary to ensure the accuracy of the fingerprint analysis results. The proposed method showed good recoveries for petroleum hydrocarbons of all carbon numbers (75%-101%). The findings above indicate that the developed method could be an efficient means to extract petroleum hydrocarbons from soil for both total quantity and fingerprint analyses. Compared with standard methods, the proposed method requires lower solvent dosages and features simpler processing steps. Another advantage of this method is that it does not require the use of highly toxic halogenated solvents; thus, it does not contribute to environmental pollution. It can be applied to the laboratory analysis of soil petroleum hydrocarbons and coupled with other rapid on-site detection techniques for soil petroleum hydrocarbons, such as infrared spectroscopy and portable GC. However, because it does not include a concentration process, the developed method exhibits relatively low sensitivity. In the future, we plan to develop a simple and flexible on-site sample-concentration system to further improve various indicators of this method.

High molar activity [18F]tetrafluoroborate synthesis for sodium iodide symporter imaging by PET

BackgroundSodium iodide symporter (NIS) imaging by positron emission tomography (PET) is gaining traction in nuclear medicine, with an increasing number of human studies being published using fluorine-18 radiolabelled tetrafluoroborate ([18F]TFB). Clinical success of any radiotracer relies heavily on its accessibility, which in turn depends on the availability of robust radiolabelling procedures providing a radiotracer in large quantities and of high radiopharmaceutical quality.ResultsHere we publish an improved radiolabelling method and quality control procedures for high molar activity [18F]TFB. The use of ammonium hydroxide for [18F]fluoride elution, commercially available boron trifluoride-methanol complex dissolved in acetonitrile as precursor and removal of unreacted [18F]fluoride on Florisil solid-phase extraction cartridges resulted in the reliable production of [18F]TFB on SYNTHRA and TRACERLAB FXFN automated synthesizers with radiochemical yields in excess of 30%, radiochemical purities in excess of 98% and molar activities in the range of 34–217 GBq/µmol at the end of synthesis. PET scanning of a mouse lung tumour model carrying a NIS reporter gene rendered images of high quality and improved sensitivity.ConclusionsA novel automated radiosynthesis procedure for [18F]tetrafluoroborate has been developed that provides the radiotracer with high molar activity, suitable for preclinical imaging of NIS reporter gene.

Determination of polychlorinated naphthalenes in soil using accelerated solvent extraction-molecular sieves solid-phase extraction coupled with gas chromatography-tandem mass spectrometry

新污染物引发的环境和健康风险正逐步受到社会各界的广泛关注,我国第十四个五年规划和2035年远景目标纲要明确“重视新污染物治理”。作为新型的持久性有机污染物,多氯萘(PCNs)在土壤中通常处于痕量水平,一般需要经过多层硅胶柱/氧化铝柱等复杂的净化方法,再结合有效的分析手段才能实现准确测定。关注土壤中多氯萘分离分析方法可以为掌握和监管其在土壤中的污染状况提供技术和方法支持。研究以13X分子筛作为固相萃取吸附剂,评价了其对多氯萘的净化效果。研究发现:使用正己烷作为上样溶剂和淋洗剂,10 mL二氯甲烷/正己烷(2∶15, v/v)为洗脱溶剂,可以实现PCNs与脂类大分子等干扰物的选择性分离,且多氯萘内标的平均回收率为56.1%~88.0%。与凝胶渗透色谱法、弗罗里硅土固相萃取柱以及多层硅胶柱/氧化铝柱相比,13X分子筛对土壤提取液的净化效果优于前两种净化方法,可以获得与多层硅胶/氧化铝柱相近的净化效果(53.0%~117.0%),而且操作更加简单,环境更加友好,分析成本大幅度下降。在此基础之上,建立了加速溶剂萃取-分子筛固相萃取,结合气相色谱-三重四极杆质谱法测定土壤中PCNs的分析方法。PCNs同族体的方法检出限为0.009~0.6 ng/g。采用基质加标法评价了本方法的精密度和准确度,CN-3、13、42、46、52、53、73、75在低、中、高加标水平下的平均加标回收率分别为70%~128%、71%~115%和61%~114%,测定结果的相对标准偏差分别为4.2%~23%、6.5%~31%和4.7%~22%,满足痕量分析的要求且平行性较好。从整个分析流程来看,13X分子筛有望成为新污染物净化的新型固相萃取吸附剂,并在土壤新污染物普查中发挥重要作用。

Optimization of a Multi-Residue Analytical Method during Determination of Pesticides in Meat Products by GC-MS/MS

In this study, a multi-residue analysis was developed for 32 compounds, including pesticides and metabolites, in five meat products using gas chromatography-tandem mass spectrometry (GC-MS/MS). The validation of the developed analytical method was also evaluated in accordance with Codex Alimentarius guidelines. Aminopropyl (NH2), C18, and florisil solid phase extraction (SPE) cartridges were used to evaluate and optimize the cleanup procedure of the tested samples prior to GC-MS/MS analysis. Based on the analytical performance, the C18 SPE cartridge was deemed to be the most suitable among the examined SPE cartridges. The optimized method demonstrated that 29 out of 32 tested compounds acquired good linearity (R2 ≥ 0.99), and 25 tested compounds displayed the method limit of quantification (MLOQ) ≤ 0.01 mg/kg. Out of the 32 tested compounds, only 21 compounds met the acceptable analytical criteria for the lard and tallow samples, compared to 27 compounds in the beef, pork, and chicken samples that falls within the acceptable standards for recovery (70–120%) and analytical precision (relative standard deviation RSD ≤ 20%). The average matrix effect was widely varied (20.1–64.8%) in the studied meat samples that were affected by either ion enhancement or suppression. In particular, in the lard sample, 13 compounds showed poor recovery and analytical precision due to ion suppression. Thus, the matrix effect (ME) was considered a critical factor during multi-residue pesticide analysis in different meat products. In conclusion, this developed analytical method can be used as a routine monitoring system for residual pesticide analysis in livestock products with acceptable analytical standards. Further meticulous analytical studies should be optimized and validated for multi-residue pesticide analysis in diversified meat products.

Determination of Pyrethroid Residues in Wooden Toys by Gas Chromatography and Gas Chromatography–Mass Spectrometry

A novel method for the determination of pyrethroid pesticide residues in wooden toys was developed. Wooden toy samples were extracted with petroleum ether−acetone (1 : 1, v/v), cleaned up on a florisil solid phase extraction cartridge and determined by gas chromatography equipped with electron capture detector (GC−ECD), followed by validation using gas chromatography−mass spectrometry (GC−MS) with negative chemical ionization. Calibration curves were linear in the range of 0.02–0.5 mg/kg with correlation coefficients exceeding 0.9975 for GC−ECD and GC−MS. At spiked concentrations of 0.1, 0.2 and 0.5 mg/kg, the average recoveries and relative standard deviations were 82–97% and 1.5–7.8%, respectively. The limit of quantification for each analyte was 0.1 mg/kg, which satisfied the current maximum residue limit permitted in wooden toys. Results also showed that the developed method could be successfully applied to determine permethrin, cypermethrin, cyfluthrin, deltamethrin residues in real wooden toy samples.

Development And Validation Of A Method For Determining Estrogenic Compounds In Surface Water At The Ultra-Trace Level Required By The EU Water Framework Directive Watch List

Natural estrogens (estrone: E1, 17β-estradiol: E2, estriol: E3) and the synthetic estrogen (17α-ethinylestradiol: EE2) are endocrine disruptors harmful to aquatic wildlife. The European Commission included these molecules in the surface water Watch Lists issued in 2015 and 2018 under the Water Framework Directive regarding emerging aquatic pollutants, proposing maximum detection limits (LOD) of 0.035 ng/L for EE2 and 0.4 ng/L for E1 and E2. Attaining these limits represents a challenge even with the most up-to-date analytical tools, in particular in surface water. A two-step sample preparation, involving a preliminary extraction of a whole water sample on a solid-phase extraction (SPE) disk and further purification on a Florisil SPE cartridge, was optimized. The purified extract was derivatized subsequently and quantified by LC-MS/MS. The main goal was to maximize the recoveries to achieve the very low LODs required by the European Watch Lists. The method was fully validated in seven surface water. The LODs calculated were below the maximum acceptable limits required by the European Commission.

Development of a Robust and Sensitive Method for Analyzing Butyltins, Phenyltins and Octyltins in Seafood

A new method has been developed and validated for determination of ten organotin compounds (OTCs), including butyltins, octyltins, phenyltins, and tricyclohexyltin, in seafood that preserved the moiety of individual OTCs. The optimized method started with extraction of OTCs by acidified methanol solution and then cleaned up with Florisil solid-phase extraction (SPE). The OTCs in extract were finally derivatized with sodium tetraethylborate. The instrumental determination was carried out by a gas chromatograph coupled to an inductively coupled plasma mass spectrometer (GC-ICP/MS). Besides, gas chromatograph tandem mass spectrometry was also studied and evaluated for OTCs’ sensitivities. The method was validated with various seafood samples, including fishes, crustaceans and mollusks, according to Eurachem guidelines. An adequate linear relationship was obtained in the studied concentration range (0.125–12.5 μg Sn kg−1) in samples; the average spiked recovery values were in the range of 70–120% for the three levels of concentration studied in samples: 1.0, 1.5, and 2.0 μg Sn kg−1. Precision values, expressed as relative standard deviation, were lower than 10% at aforementioned spiking levels. The detection limits and quantification limits were below or equal to 0.25 and 1.0 μg Sn kg−1, respectively. Besides, certified reference material was used to assess the accuracy of the developed method. The developed method was successfully applied for the OTC determination in real samples.

Analysis of polyhalogenated carbazoles in sediment using liquid chromatography–tandem mass spectrometry

The purpose of this study was to develop a novel and sensitive method for the analysis of carbazole and polyhalogenated carbazoles (PHCs) in sediment using ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Briefly, 5.0 g of freeze-dried sediment samples were extracted with dichloromethane using pressurized liquid extraction (PLE). The extract was purified with Florisil solid phase extraction cartridge, filtered through 0.22 µm polytetrafluoroethylene filter using a glass syringe, followed by LC-MS/MS analysis. Besides parameters for LC-MS/MS analysis, sample preparation procedures (including solvents for PLE, sorbents for cleanup, and filters for sample filtration) were optimized. The limits of detection and limits of quantification of target compounds were in the ranges of 3.0 × 10−3 to 0.22 ng g−1 dry weight (d.w.) and 1.0 × 10−2 to 0.75 ng g−1 d.w., respectively. The recoveries of target compounds in the spiked sediments at 2.0 ng g−1 d.w. and 10 ng g−1 d.w. were 64.8–91.8% and 70.9–124.7%, respectively, with relative standard deviations being less than 13.2%. Except that 36-BCZ had positive matrix effects of 63.3%, the sediment matrices generally displayed low or medium negative matrix effects on the other target compounds during LC-MS/MS analysis. The developed method was applied in the analysis of carbazoles and PHCs in sediment samples from Jiulong River, Fujian, China and all the target compounds were detected in the samples.

Multiresidue analytical method for the determination of 41 multiclass organic pollutants in mussel and fish tissues and biofluids by liquid chromatography coupled to tandem mass spectrometry.

In this work, the full optimisation and validation procedure to analyse a wide set of emerging organic contaminants in biotissues (mussel and fish muscle, liver, gills and brain) and biofluids (fish plasma and bile) is described. The target families include artificial sweeteners, industrial products, hormones, pharmaceutical and personal care products, pesticides and phytoestrogens. Different clean-up strategies (hydrophilic-lipophilic-balanced (HLB) solid-phase extraction, Florisil solid-phase extraction and liquid-liquid extraction followed by HLB solid-phase extraction and microextraction based on polyethersulfone polymer) were evaluated for the clean-up of focused ultrasonic solid-liquid extraction (FUSLE) extracts before the analysis by liquid chromatography-triple quadrupole tandem mass spectrometry (LC-QqQ-MS/MS). The methods afforded satisfactory apparent recovery values (71-126%) using isotopically labelled analytes and matrix-matched calibration approach, regardless of the matrix. Method detection limits in the range of 4-48ng/g and 0.3-111ng/L were obtained for biotissues and biofluids, respectively. The developed method was applied to determine the uptake and tissue distribution in juvenile gilt-head bream (Sparus aurata) during 7days in seawater, and unexpectedly, perfluoro-1-butanesulfonate tended to accumulate in liver and, to a lesser extent, in muscle and gills. Furthermore, real mussel samples collected in the Basque coast were also analysed and the presence of the highly consumed valsartan (7ng/g) and telmisartan (6.8ng/g) compounds in bivalves is reported for the first time here. Graphical abstract ᅟ.

Study on the simultaneous degradation of five pesticides by Paenibacillus polymyxa from Panax ginseng and the characteristics of their products

The quality and safety of ginseng products were seriously affected due to the slow metabolism and long-term residual pesticides in ginseng. Microbial degradation is an effective method to degrade pesticide residues. In this study, ginseng endophytic Paenibacillus polymyxa was used to degrade pesticide residues. A method of simultaneous determination of fluazinam, BHC, PCNB, chlorpyrifos and DDT in ginseng roots and ginseng stems and leaves by GC was established. The sample was extracted with n-hexane and purified by Florisil solid phase extraction column. The limit of quantitation was 0.01 μg mL−1, the linear relationship was good (r ≥ 0.9901). 7 days after inoculated with P. polymyxa, the degradation rates of fluazinam, BHC, PCNB, chlorpyrifos, and DDT in the medium were 94.77%, 70.34%, 77.92%, 78.30%, 66.70%, respectively (P < 0.05). The safety of 5 pesticide degradation products was investigated by GC-MS. The results showed that after 7 days degradation, the main degradation products were alkanes, which are non-toxic and can’t cause secondary pollution to the environment. The actual degradation results were verified by field experiments. The results indicated that after sprayed 5 times with P. polymyxa, the degradation rates of fluazinam, BHC, PCNB, chlorpyrifos and DDT in the ginseng roots were 66.07%, 46.24%, 21.05%, 72.40%, 54.21%, respectively (P < 0.05). The degradation rates in ginseng stems and leaves were 74.18%, 55.61%, 73.65%, 58.13%, 46.91%, respectively (P < 0.05). The results indicated that Paenibacillus polymyxa was an effective degradation strain of 5 pesticides.

A simultaneous multiresidue analysis for 203 pesticides in soybean using florisil solid-phase extraction and gas chromatography–tandem mass spectrometry

A multiresidue analysis method for the simultaneous determination of 203 pesticides in soybean was developed using solid-phase extraction (SPE) and gas chromatography–tandem mass spectrometry (GC–MS/MS). Scheduled multiple reaction monitoring by GC–MS/MS was optimized in electron ionization mode. The target pesticides satisfied the method limit of quantitation below 0.01 mg/kg, and an excellent instrumental repeatability was obtained. The calibration curve correlation coefficients (r2) for 201 (99.0%) pesticides were ≥ 0.990. The Multiclass Pesticide Multiresidue Method (No. 2) of the Korea Food Code was scaled down and applied for efficient sample treatment. Soybean sample (10 g) was extracted with 20 mL acetonitrile. The sample was filtered, partitioned with sodium chloride, and centrifuged. The supernatant (8 mL) was subjected to cleanup with a florisil SPE cartridge (500 mg), and the final extract was subjected to GC–MS/MS analysis. To remove fat, further liquid–liquid partitioning with n-hexane/acetonitrile was conducted before the SPE cleanup, and this procedure was compared to the non-partitioning procedure. The percentage of pesticides satisfying the recovery range of 70–120% with a relative standard deviation ≤ 20% in the non-partitioning and partitioning procedures were 87.2% and 78.8% at 0.01 mg/kg and 88.2% and 76.8% at 0.05 mg/kg, respectively. The average matrix effect value (%) was 5.5%. This miniaturized analytical method can be successfully applied for rapid and sensitive monitoring of multiresidues in soybean and related agricultural products.

Residue determination of triclopyr and aminopyralid in pastures and soil by gas chromatography-electron capture detector: Dissipation pattern under open field conditions

In this study, a new method for the simultaneous quantitative determination of triclopyr and aminopyralid in forage grass, hay, and soil was developed and validated using gas chromatography coupled with electron capture detector (GC-ECD). In this method, a simple and maneuverable esterification reaction was applied to convert the two acidic herbicides into their ester form with methanol. The target compounds were extracted with 1% hydrochloric acid-acetonitrile, esterified, purified by florisil solid-phase extraction cartridge, and detected in a single run by the GC-ECD. The average recoveries using this method, at different fortified levels, ranged from 80% to 104% with intra-day and inter-day RSDs in the range of 1.2–10.8% and 3.3–10.3% for both the herbicides, respectively. The LODs were below 0.02 mg/kg while the LOQs were below 0.05 mg/kg, both of which were much lower than the maximum residue limits (MRLs) of 25–700 mg/kg in pastures, as established by the USA (the code of federal regulations). The open field dissipation and residual analysis in pastures and soil were conducted with the commercial formulation at two locations. With time, both triclopyr and aminopyralid dissipated via first-order kinetics. In forage grass, both compounds degraded rapidly over the first 14- or 21-d period and at a slow rate over the remainder of experimental days. In soil, they degraded at a relatively slow rate, and dissipated steadily to below or close to the LOQ by 60-d post application. The half-lives of triclopyr were 1.4–1.8 d and 6.2–9.0 d and aminopyralid were 1.7–2.1 d and 8.2–10.6 d in terms of forage grass and soil, respectively. The terminal residue results indicated that on 7 d after the treatment, the residues of aminopyralid and triclopyr in forage grass and hay were lower than the MRLs set by the USA. This work can provide guidance on the reasonable use of these herbicides and also provide an analytical method for the determination of triclopyr and aminopyralid in pasture and soil.

Analysis of organophosphorus flame retardants in submicron atmospheric particulate matter (PM1)

This study is aimed to determine the occurrence of organophosphorus flame retardants (OPFRs) in atmospheric particulate matter with an aerodynamic diameter of less than 1 µm (PM 1 ). The analytical method is based on Soxhlet extraction and a clean-up step with Florisil solid phase extraction (SPE). Detection and quantification was performed by gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). Validation included laboratory and field blank tests as well as the determination of the method efficiency using spiked quartz filters with 20 ng and 200 ng of OPFR mixture. Ambient air PM samples with particle concentrations between 4 and 26 µg/m 3 were collected at an urban background site in Barcelona under contrasting meteorological conditions in order to study occurrence of OPFRs in relation to particle loads. In these samples, OPFRs were detected at levels ranging from a few pg/m 3 to 1200 pg/m 3 and substantial correlations were observed between the levels of certain OPFRs and atmospheric particle loadings. The presence of individual compounds in pg/m 3 concentrations levels in the sub-micron PM mode (PM 1 ) at an urban background site indicates a considerable exposure to these compounds for the human population in this area. This is the first study to determine OPFR in PM 1 .

Determination of short-chain chloroparaffins in synthetic surfacing layers used in sports and diluents by solid-phase extraction coupled with gas chromatography-negative chemical ionization-mass spectrometry

A new method was established to determine short-chain chloroparaffins (SCCPs) in synthetic surfacing layers used in sports and diluents by solid-phase extraction (SPE) coupled with gas chromatography-negative chemical ionization-mass spectrometry (GC-NCI-MS). The analysis conditions for gas chromatography and mass spectrometry were optimized. Then, the samples were extracted by ultrasonication, purified on a Florisil SPE column, monitored in the selective ion monitoring (SIM) scanning mode, and quantified by the external standard method. With this method, a good linear relationship was found over a wide mass concentration range from 0.0501 to 100.17 mg/L, with a linear correlation coefficient (R2) of 0.9995. The detection limit for SCCPs by this method was found to be as low as 0.50 μg/g (i. e. 0.000050%) and the average recoveries for SCCPs spiked in the blank samples varied from 83.2% to 96.3% with relative standard deviations (RSDs) of 1.56%-6.02%. Ten batches of samples were tested and the contents of SCCPs detected in each batch were in the range from 0.016% to 0.55%, which agrees well the European Union limitation requirement for SCCPs. Thus, this method is suitable for qualitative and quantitative analyses of SCCPs in synthetic surfacing layers used in sports and diluents.

Kinetics of diuron under aerobic condition and residue analysis in sugarcane under subtropical field conditions

ABSTRACTThe phenylureas group includes persistent herbicides which are major pollutants to soil and water. Dissipation kinetics of diuron in different soils under sugarcane field conditions was investigated. Diuron was extracted with acetone and florisil solid phase extraction clean-up and characterized by high-performance liquid chromatography-UV. Diuron persisted for more than 100 days and dissipation followed monophasic first-order kinetics. Persistence was more in sandy loam compared to silty clay loam soil. Half-life of diuron in silty clay loam soil was 22.57 and 32.37 days and in sandy loam was 28.35 and 43.93 days at 2 and 4 kg ha−1applications, respectively. Average recovery in soil, bagasse, leaf-straw and juice ranged from 75.95% to 84.20%, 80.15% to 89.35%, 77.46% to 86.19% and 81.88% to 92.68%, respectively. The quantitation limits for soil, bagasse, leaf-straw and juice were 0.01, 0.03, 0.04 μg g−1 and 0.008 μg mL−1, respectively. Application of diuron inhibited growth of soil microbes initially but they recovered later. At harvest, diuron residues were below maximum residue limits in all samples. The study revealed that under subtropical conditions, diuron is safe for use in weed management and would not pose any residual/environmental problem and that sugarcane crop could be used safe for human/animal consumption.

Residual dynamic and risk assessment of dimethomorph in Swiss chard grown at two different sites.

Residue analysis of dimethomorph in Swiss chard cultivated at two different locations under greenhouse conditions was conducted using high-performance liquid chromatography-ultraviolet detection and confirmed by tandem mass spectrometry. The randomly collected samples (over 14 days) were extracted with acetonitrile and purified using a Florisil solid-phase extraction cartridge. Linearity over a concentration range of 0.05-50.0 mg/L had an excellent coefficient of determination of 0.9996. Recovery rate ranged from 82.98 to 95.43% with relative standard deviations ≤5.12% and limits of detection and quantification of 0.003 and 0.01 mg/kg, respectively. The initial deposits [day 0 (2 h post-application)] were considerably lower (7.57 and 8.55 mg/kg for sites 1 and 2, respectively) than the maximum residue limit (30 mg/kg) set by the Korean Ministry of Food and Drug Safety. The dissipation half-life was approximately the same, being 5.0 and 5.1 days for sites 1 and 2, respectively. Risk assessment estimated as acceptable daily intake revealed a value of 0.084 or 0.094% (day 0) and 0.014% (10 days post-application), for sites 1 and 2, respectively. The values indicated that dimethomorph can be safely used on Swiss chard, with no hazardous effects expected for Korean consumers.

Decline pattern and risk assessment of cyenopyrafen in different varieties of Asian pear using liquid chromatography and tandem mass spectrometry.

The dissipation pattern of a commercial cyenopyrafen formulation sprayed at the recommended dose on Asian pears (two different species) grown at two different sites was investigated using liquid chromatography-ultraviolet detection. Samples collected randomly over 14 days were extracted using acetone, partitioned using n-hexane/dichloromethane (8/2, v/v), and purified using a Florisil solidphase extraction cartridge. The residues in field-incurred samples were confirmed via liquid chromatography-tandem mass spectrometry. The method was validated in terms of excellent linearity in the solvent (R 2=1); moreover, satisfactory recoveries (89.0-107.3%) were obtained at three fortification levels with a relative standard deviation (RSD)≤5.0% and the limits of detection and quantification of 0.0033 and 0.01 mg/kg, respectively. Although the residual levels at both sites were lower than the maximum residue limit (MRL=1 mg/kg), the dissipation at Site 2 was faster than that at Site 1. Consequently, the half-life (t1/2) in Site 2 (5.2 d) was shorter than that in Site 1 (9.8 d). Risk assessment at zero days showed acceptable daily intakes (%) of 27.25% and 24.52% at Sites 1 and 2, respectively, indicating that these fruit species are safe for consumption.

The disappearance rate and risk assessment of thiacloprid residues in Asian pear using liquid chromatography confirmed with tandem mass spectrometry.

This study was undertaken to quantify the residue levels and propose the dissipation kinetics of thiacloprid formulated as suspension concentrate in field-incurred Asian pears grown under two different open-field conditions. Samples were extracted with 20% distilled water in acetonitrile; partitioned with brine water and dichloromethane; and purified with a Florisil solid phase extraction cartridge. The analyte was identified with an LC ultraviolet detector, and field-incurred samples were confirmed using LC-MS/MS. The calibration curve was linear over the range 0.05-5.0 mg/L with a satisfactory coefficient of determination (R2 = 0.9994). The limits of detection and limits of quantification (LOQ) were 0.003 and 0.01 mg/kg, respectively. The recovery rate fortified to blank samples at LOQ, 10× LOQ, and the maximum residue limit (MRL) were between 73.7 and 86.2% with relative standard deviation ≤9.0%. The residual concentrations at both sites were considerably lower than the MRL (0.7 mg/kg) set by the Korean Ministry of Food Drug Safety, with biological half-lives of 5.0 and 7.4 days, for sites 1 and 2, respectively. From the pre-harvest residue limit curve, it was predicted that if the residues were <1.13 or 1.40 mg/kg 10 days before harvest, the residue level would be lower than the MRL during harvest. Risk assessment on day 0 showed an acceptable daily intake (%) of 13.0% and 11.0% for sites 1 and site 2, respectively, which indicates that the residual amounts are not hazardous to the Korean population.

액체크로마토그래피를 이용한 농산물중 pyribencarb와 대사물 KIE-9749의 잔류 분석법

농산물중 pyribencarb와 그 대사물 KIE-9749의 잔류분석법을 개발하였다. 분석법 개발에 사용된 농산물은 5대 작물군의 대표작물인 사과, 고추, 감자, 현미, 대두와 잔류허용기준이 설정된 배, 복숭아, 오이, 포도였다. 각 농산물은 아세톤으로 추출하였으며 액-액분배를 이용하여 1차 정제하고 Florisil solid phase extraction (SPE) cartridge와 aminopropyl SPE cartridge를 이용하여 2차 정제를 실시하는 조건을 확립하였다. 기기분석 조건은 HPLC/UVD 265 nm 파장에서 acetonitrile과 물을 이동상으로 사용하여 확립하였다. 확립된 분석법을 분석자를 달리하여 검증한 결과 pyribencarb의 회수율과 RSD값은 78~108%, 2.7~12.2%였으며, KIE-9749의 회수율과 RSD값은 74~114%와 1.7~15.0%를 보였다. 분석법의 정량한계(LOQ)는 두 성분 모두 <TEX>$0.05{\mu}g/g$</TEX>이었으며 LC/ESI-MS/MS를 사용하여 확립된 정성조건에서 방해 피크는 발견되지 않았다. 확립된 분석법은 pyribencarb와 그 대사물 KIE-9749에 대한 농산물의 안전성 검사를 위해 사용될 수 있을 것이다. The aim of this study was to develop an analytical method for the determination of pyribencarb and its metabolite KIE-9749 in agricultural commodities. The experiment was performed with a range of concentrations <TEX>$0.05{\sim}2.5{\mu}g/g$</TEX> in apple, green pepper, potato, hulled rice, soybean, pear, peach, grape and cucumber. Each samples were extracted with acetone and cleaned by dichloromethane/saline water partition and purified with Florisil solid phase extraction (SPE) cartridge and aminopropyl SPE cartridge. Pyribencarb and KIE-9749 were separated and quantified by HPLC/UVD at 265nm using acetonitrile and water as mobile phase. The recoveries of pyribencarb and KIE-9749 were within 78.3~108.4% and 73.9~113.7% with RSD below 12.2% and 15.0%, respectively. The limits of quantification (LOQ) were both <TEX>$0.05{\mu}g/g$</TEX>. LC/ESI-MS/MS was optimized for confirmation of residue identity.