Flats Plant Research Articles

Agrophysiological responses of bread wheat to raised-bed planting and irrigation level

ABSTRACT To investigate the response of wheat to drought stress under different plantation systems, two field experiments were carried out in 2021/22 and 2022/23 in Arsanjan. The main plot was three different plantation systems (flat planting, 60-cm raised beds, and 120-cm raised beds) and the subplots were irrigation levels at 100% (control), 80% (medium stress), and 60% (severe stress) of crop evapotranspiration. The results showed that the raised-bed planting increased grain yield by 22.1 and 25.9% compared to flat cultivation in the first and second years, respectively. This increase in the biological yield was about 17%, the number of ears was 7%, and the number of seeds per ear was 21%. Drought stress caused a significant decrease in grain yield (46.4%), number of ears (20.5%), seed number (30.3%), biological yield (45.9%), chlorophyll a (31.8%), chlorophyll b (28.1%) and relative water content (5.3%) and increased, proline content (24.3%), and ion leakage (147.3%). The decrease in yield due to drought stress was moderated in the raised-bed system and therefore cultivation on the raised-bed is suggested as a suitable planting pattern to improve the yield and water efficiency in wheat under conditions similar to the experimental area, especially under water shortage conditions.

Effects of long-term biodegradable film mulching on yield and water productivity of maize in North China Plain

Biodegradable films are considered ideal alternatives to polyethylene films because of their advantages in increasing crop yield and controlling soil pollution. However, the influences of biodegradable film mulching on soil physicochemical environments and water productivity after long-term mulching remain poorly understood. Therefore, a field experiment after long-term mulching (since 2016) was conducted to explore the effects of black biodegradable film (BB), transparent biodegradable film (TB), and traditional polyethylene film (PE) on soil physicochemical environments, aboveground biomass accumulation, grain yield, evapotranspiration, and water productivity (WP) of maize in the 2021 and 2022 in the North China Plain. The results showed that polyethylene films and biodegradable films had a similar ability to preserve soil moisture, promote maize growth, reduce evapotranspiration, and increase WP. Moreover, the performances of BB were more equivalent to PE, and there was no significant difference on WP and yield under BB and PE. Compared with traditional flat planting without mulching (CK), BB and PE significantly increased yield (9.5 % and 12.7 % in 2021; 5.25 % and 6.37 % in 2022) and WP (11.54 % and 21.47 % in 2021; 24.28 % and 23.42 % in 2022). Film mulching treatments increased the soil organic carbon sequestration rate, and the content of soil organic carbon, microbial activity, and urease activity in the 0–20 cm soil layer compared with CK. According to structural equation modeling, the increasing soil water storage because of films mulching positively influenced yield by enhancing enzyme activities which were related to soil nutrients. Over all, these results showed that black biodegradable film is an ideal replacement for polyethylene films under long-term mulching conditions because of its comparable agronomic performance and influence on soil physicochemical environments in the North China Plain.

Impact of Crop Establishment Methods on the Growth and Yield Performance of Maize Varieties in the Kharif Season

A field trial was carried out in Pantnagar, Uttarakhand, India, during the Kharif season to evaluate the performance of maize varieties using various planting methods. The study included five distinct planting techniques: Flat, Bed, Ridgetop, Ridge mid-slope and Broad Ridge mid-slope both sides. Two maize varieties were tested: the composite PSM-1 and the hybrid DKC 9144. Results showed that the Broad Ridge mid-slope on both sides method led to the highest growth parameters, including; plant height, stem girth and dry matter accumulation per plant. During both the years, the Broad Ridge mid-slope planting method led to notable increase in plant height (7% and 6.1%), stem girth (5.25 & 4.67 cm) and dry matter accumulation (13.6% & 20.7%) respectively when compared to the flat planting method. Among the varieties, the hybrid DKC 9144 exhibited greater height, stem girth, more dry matter accumulation, grain and stover yields compared to the composite PSM-1. The findings suggest that the broad ridge mid-slope planting method, and hybrid variety DKC 9144, was the most effective and viable strategy for Kharif maize production in tarai region.

Straw-derived biochar regulates soil enzyme activities, reduces greenhouse gas emissions, and enhances carbon accumulation in farmland under mulching

Context or problemFilm mulching can significantly increase crop yields, but long-term continuous mulching will reduce the soil fertility and lead to soil quality degradation. Incorporating exogenous carbon (C) is widely recognized as an effective countermeasure for improving degraded farmland soil under mulching in semiarid areas. Objective or research questionWe compared the effects of straw and biochar on the accumulation of C and soil biochemical properties in both mulched and non-mulched farmland, and investigated the effects of various types of straw inputs on greenhouse gas (GHG) emissions. MethodsA field experiment was conducted to test six treatments: flat planting without mulching (NN), flat planting with straw incorporation (NS), flat planting with biochar incorporation (NB), film mulching (MN), film mulching with straw incorporation (MS), and film mulching with biochar incorporation (MB)]. Comprehensive assessments were conducted in Pengyang, Ningxia, China during the two growing seasons of 2020 and 2021. ResultsMulching increased the soil hydrothermal conditions, maize yields (29.32 %), and GHG emissions (CO2: 10.07 %; N2O: 1.42 %) but decreased the soil organic C storage (SOCS: 6.91 %). Straw returning increased the plant fixed C (14.99 %), improved GHG emissions (CO2: 4.95 %; N2O: 4.33 %), and inhibited CH4 uptake (3.78 %). Compared with MS, MB reduced the GHG emissions (CO2: 9.93 %; N2O: 20.97 %) and net global warming potential (7.08 %), but increased the SOCS (SOCS: 3.42 %), C efficiency ratio (CER: 26.93 %), CH4 uptake (10.72 %), and soil enzyme activities (invertase: 6.48 %; urease: 13.76 %). ConclusionsIncorporating biochar rather than straw has greater potential for enhancing the soil enzyme activities and C use efficiency while also reducing the GHG emissions and net global warming potential caused by mulching in dryland farming. Implications or significanceIn this study, we comprehensively compared the effects of incorporating straw, film mulching, and biochar incorporation on C accumulation, GHG emissions, and maize yields in dryland farming. Our findings provide a scientific basis for achieving green and sustainable high-yield production in mulched dryland farming.

Analysis of Maize Planting Mode and Simulation and Optimization of Ridging and Fertilization Components in Arid Area of Northwest China

The arid area of Northwest China belongs to the rain-fed agricultural area of the Loess Plateau, and water resources have become one of the important factors limiting agricultural development in this area. This study employed the AquaCrop model to predict the yield advantages and environmental adaptability of maize in Dingxi City from 2016 to 2020 under two cultivation practices: ridge tillage (100% film coverage with double ridge-furrow planting) and flat planting (81.8% film coverage with wide-film planting). The numerical simulation of the tillage and fertilization process of the double-ridge seedbed was carried out by EDEM, and the key components were tested by the Box–Behnken center combination test design principle to obtain the optimal parameter combination. The results showed that ridge planting was more suitable for agricultural planting in rain-fed arid areas in Northwest China. The simulation analysis of ridging and fertilization showed that the forward speed of the combined machine was 0.50 m/s, the rotation speed of the trough wheel of the fertilizer discharger was 39 rmp, and the rotary tillage depth was 150 mm. The qualified rate of seedbed tillage was 93.6%, and the qualified rate of fertilization was 92.1%. The research shows that the whole-film double ridge-furrow sowing technology of maize is more suitable for the rain-fed agricultural area in the arid area of Northwest China. The simulation results of the ridging fertilization device are consistent with the field experiment results. The research results provide a certain technical reference for the optimization of the whole-film double ridge-furrow sowing technology.

Mechanized No-Tillage Planting with Maize Straw Mulching Improves Potato Yield and Water Use Efficiency in Arid Regions of Northwest China

To explore the yield-increasing mechanism of mechanized potato planting with corn straw mulching, a two-year (2021 and 2022) field experiment was conducted to study the effects of mechanized no-tillage with straw mulching on potato yield and water use efficiency. This experiment included mechanized no-tillage potato planting with corn straw mulch covering (JG), plastic film mulching (HM), and open flat planting (CK). The results showed that mechanical no-tillage with straw mulching significantly affected soil water content in the 0–100 cm soil layer, yield, and water use efficiency (p < 0.05). There was no significant difference in yield between JG and HM, but it was significantly higher than that of CK. The yield of JG was 3.09~12.27% higher than that of CK. The yield increase was mainly achieved by increasing the potato weight per plant (0.697~0.862 **) and the average single potato weight (0.048~0.631). The tuber weight per plant was positively correlated with the plant height at the seedling stage (0.03~0.92 **) and positively correlated with the dry weight of stems and leaves at the tuber expansion stage and starch accumulation stage (0.74 **~0.95 **). It was negatively correlated with the number of branches at the tuber formation stage (−0.33~−0.88 **). Compared with CK, JG could significantly improve the water use efficiency of potatoes and reduce water consumption during the whole growth period of crops. In 2021, JG was 6.5% higher than CK, and HM was 6.88% lower than CK. In 2022, JG and HM increased water use efficiency by 26.17% and 14.50% compared with CK. When HM is applied in heavy soil areas, soil compaction can easily occur, which affects seedling emergence and reduces yield. At the same time, JG has strong adaptability to soil types and good yield stability. It can be seen that JG is a green and efficient mechanized potato cultivation technology suitable for dry farming areas.

Incorporating straw‐derived biochars enhances soil nitrogen accumulation and mitigates nitrogen leaching to facilitates crop productivity of mulching farmland in semiarid regions

AbstractThe long‐term use of film mulching and conventional chemical fertilizers in semiarid regions has resulted in soil degradation and suboptimal fertilizer utilization, necessitating a reevaluation of agricultural practices to enhance resource utilization efficiency and ensure the sustainability of dryland crop production. We conducted a 5‐year study (2017–2021) field experiment in northwest of China, to assess the impact of straw or biochar incorporation on soil water accumulation, crop nitrogen transport, and maize yield under film mulching field. The experiment had six treatments (flat planting without mulching [NN], flat planting with straw incorporation [NS], flat planting with biochar incorporation [NB], film mulching [MN], film mulching with straw incorporation [MS], and film mulching with biochar incorporation [MB]). We undertook a comprehensive assessment over the two growing seasons in 2020–2021. The film mulching and straw/biochar treatments improved soil water storage. The MB treatment significantly decreased 60–200 cm soil NO3−‐N content by 28.37% compared with MN. Biochar incorporation significantly increased soil total and alkali‐hydrolyzable N contents, whereas MS decreased soil alkali‐hydrolyzable N content compared with MN. The maize plant N transportation and grain contribution rates were significantly higher under MS (17.46% and 29.84%) and MB (28.00% and 31.69%) than under MN, respectively. Straw and biochar incorporation significantly increased water use efficiency, nitrogen fertilizer recovery efficiency, and maize yield, on average, by 9.62%, 9.14%, and 14.6%, respectively. In conclusion, incorporating biochar, in particular, positively mitigated N losses, enhanced N utilization efficiency, and increased maize yield in long‐term film mulching farmland in semiarid region.

Winter wheat source‐sink relationships under various planting modes, complementary irrigation, and planting densities

AbstractVarious agronomic practices can affect the processes of aboveground dry matter accumulation (source) and grain filling (sink), resulting in yield differences. Improved source‐sink relationships can facilitate the production and accumulation of assimilates to increase the productivity of winter wheat (Triticum aestivum L.). A two‐season field experiment was undertaken on winter wheat during 2020–2021 and 2021–2022. In a split‐split‐plot design with three replicates (randomized blocks), we compared two planting modes (ridge‐furrow planting with plastic mulching [RFPM]; traditional flat planting [TF]), two complementary irrigation levels (I30+30: 30+30 mm; I0: no irrigation), and three planting densities (D1, D2, and D3: 240, 360, and 480 plants m−2). The results showed that RFPMI30+30 significantly increased maximum yield by 28.5% compared with TFI0. Although D3 increased the number of effective spikes per unit area and duration of grain filling compared to D2, it reduced the number of grains per spike, 1000‐grain weight, and average filling rate. Compared to TF and I0, RFPM and I30+30 improved the sink/source ratio by 5.3% and 6.5%, respectively. Grain yield peaked at D2 in the RFPM and at D3 in the TF. Medium planting density (D2) and complementary irrigation (I30+30) during the wintering and reviving periods under RFPM can achieve better source‐sink balance relationships and the maximum grain yield of winter wheat. Overall, we believe that in most cases, wheat yields are source‐limited and can be improved by ridge‐furrow planting with plastic mulching, complementary irrigation, and planting density regulation.

Evapotranspiration, water use efficiency, and yield for film mulched maize under different nitrogen-fertilization rates and climate conditions

The biodegradable film, as an ideal substitute for plastic film, has broad application prospects. However, it is uncertain in maize actual evapotranspiration (ETac) components, yield, and water use efficiency (WUE) of biodegradable and plastic films during the different rainfall seasons. Therefore, a 4-year field trial with three mulching patterns (FNM: flat planting with non-mulching, RPM: ridge-furrow with plastic film mulching, and RBM: ridge-furrow with biodegradable film mulching) and two N-fertilization levels (0 and 180 kg N ha–1) was conducted. The results showed that the machine-learning models could accurately estimate maize ETac and its partitioning, and the random forest and artificial neural networks models had the highest accuracy and the least input variables after optimization. Compared to FNM, RBM and RPM increased Et by 10.8 mm, 14.0 mm in the dry season, 9.1 mm, 11.2 mm in the normal season, and 4.0 mm, 7.5 mm in the wet season, respectively, but decreased Es by 75.8 mm, 82.7 mm in the dry season, 48.6 mm, 56.7 mm in the normal season, 67.1 mm, and 74.9 mm in the wet season, respectively. Therefore, RBM and RPM decreased ETac by 65.0 mm, 68.8 mm in the dry season, 39.5 mm, 45.6 mm in the normal season, and 53.1 mm, 67.5 mm in the wet season, respectively, compared to FNM. Nitrogen application had a similar effect on Es and Et but only increased ETac by 13.3 mm in the dry season, 2 mm in the normal season, and 4.3 mm in the wet season, respectively, compared to N0. Furthermore, RBM and RPM under different nitrogen-fertilizations increased maize yield by 4.0 %, 3.6 % in the dry season, 3.0 %, 3.3 % in the normal season, and 5.3 %, 5.9 % in the wet season, respectively, also increased maize WUE by 23.3 %, 24.1 % in the dry season, 12.9 %, 15.0 % in the normal season, and 21.1 %, 23.4 % in the wet season, respectively, compared to FNM. This study proved that RPM could be replaced by RBM under 180 kg N ha–1 in the different rainfall seasons in terms of reducing ETac, increasing maize yield, and improving WUE. The optimized machine learning models in this study also provided a low-cost method for computing regional maize ETac.

Effect of Ridge–Furrow with Plastic Film Mulching System and Different Nitrogen Fertilization Rates on Lodging Resistance of Spring Maize in Loess Plateau China

The ridge–furrow with plastic film mulching (RF) system has been widely adopted in rain-fed crop planting due to its potential to enhance crop yield and water use efficiency. However, the impact of the RF system on maize lodging resistance, particularly when nitrogen fertilizer is applied, remains uncertain. Therefore, a two-year field experiment was carried out with two planting systems (FP: flat planting and RF) and two nitrogen application rates (N180: 180 kg·N ha−1 and N300: 300 kg·N ha−1) to assess the risk of lodging in maize. The results showed that compared to FP, RF resulted in a significant increase of 78.7% in lodging rate. In addition, the lodging rate increased by 22.6% with increasing nitrogen fertilizer application. The lignin content increased by 43.4%, while the stalk bending strength rose by 42.5%, under RF compared to the FP system. These improvements in the mechanical properties of maize stalks contributed to the improved lodging resistance index of RF, which was found to be approximately 21.3% higher than that of FP. In addition, high nitrogen application rates increased the risk of lodging for different planting patterns over two years. In conclusion, fertilization of spring maize with 300 kg·N ha−1 under the RF system led to higher yields but increased lodging rates. The risk of lodging should be considered when planting maize under the RF system. The results of this study can provide scientific basis and technical support for the optimization of rain-fed maize cultivation measures in the Loess Plateau.

Determination of Airborne Release Fractions from Loose Powder Contamination Under Impact Stress

Safety basis calculations support the safety considerations necessary for legacy nuclear facilities as they transition from active use, through limited operations and standby modes, until final disposition is achieved. Many of the calculations are governed heavily by the coefficients presented in DOE-HDBK-3010 in the form of airborne release of radioactive material resulting from penetration of the facility per seismic activity, full facility fires, and/or explosions. The main objective of this study is to validate the original data for airborne release fractions (ARFs) for powder contaminants under impact, as determined in DOE-HDBK-3010. The limited data available for impact experiments was generated at the Rocky Flats Plant in 1987, where the median ARFs for surrogate powder contamination were 4E-4 with a bounding value of 1E-2. However, estimating the level of uncertainty was challenging in the absence of multiple measurements conducted under identical test conditions. Moreover, the uncertainty was significantly increased due to the restricted range of the test conditions. A more modern approach has been developed for the experimental design in this study, utilizing standardized techniques and analytical instruments. An impact apparatus was employed to be able deliver repeatable impact forces up to 369 kg·cm (320 in.·lb.). Cesium chloride was used as the surrogate powder contaminant in these experiments as it is extremely soluble in water and is even more so in the acidic media used to leach/dissolve the air filters for concentration analysis using mass spectrometry The developed approach leveraged multiple international standards and historical documents in an attempt to recreate a valid testing system that can be used for future analysis and to analyze mitigation factors such as contamination fixative technologies. The current ARFs were found to be consistent with the original values in DOE-HDBK-3010, 3.47E-4 and 4E-4, respectively.

EFFECTS OF RAINWATER HARVESTING PRACTICES ON BIOMASS YIELD AND MORPHOMETRIC TRAITS OF SORGHUM (Sorghum bicolor L. Moench) IN SEMI-ARID KITUI COUNTY, KENYA

<p><strong>Background</strong>: Sorghum is an important source of fodder in the semi-arid areas of Kenya. However, its biomass yield has remained low due to the low soil moisture content which is associated with low rainfall. <strong> Objective:</strong> To evaluate the synergistic effects of combining rainwater harvesting practices on biomass yield and the morphometric traits of sorghum in semi-arid Kitui County. <strong>Methodology</strong>: The study was conducted in a randomized complete block design under rainfed conditions between March and August 2021 at the Research Farm of South Eastern Kenya University. It had twelve treatments, including three farming systems (conventional flat planting, ridge and furrow, and zai pits) with three soil mulching types (transparent plastic film mulch, black plastic film mulch, and grass mulch). The farming systems without mulching were used as control treatments. Data were subjected to analysis of variance and means were separated using Fisher’s protected Least Significant Difference test at 0.05 %. <strong>Results:</strong> The zai pits with black plastic film mulch and flat planting with grass mulch had the highest and lowest moisture content of 68.65% and 52.5% respectively compared to flat planting. The highest biomass yield was observed in ridge-furrow with black plastic film mulch (3283.33kg ha-<sup>1</sup>) and ridge–furrow with transparent plastic film mulch (3266.03) and was not significantly different. The lowest biomass yield was recorded in conventional flat planting and zai pits and was not significantly different. In all treatments, there was a significant increase (p ≤ 0.05) in morphometric traits. <strong>Implications: </strong>The farming system and the type of soil mulching determined the increase of soil moisture content, biomass yield, and morphometric traits. <strong>Conclusion</strong>: Combining ridge-furrow and black plastic mulch is recommended to improve the biomass yield of sorghum in semi-arid Kitui County, and other areas with similar agroecological conditions.</p>

Alfalfa Cultivation Patterns in the Yellow River Irrigation Area on Soil Water and Nitrogen Use Efficiency

Establishing lucerne field is an efficient way to protect natural steppes, alleviate conflicts between meadows and livestock, and promote the development of animal husbandry. However, problems such as extensive field management, valuing yield over quality, and low resource utilization are endemic in production. Exploring reasonable cultivation patterns can contribute to improving the current situation of artificial grassland production and promoting the high-quality development of husbandry and prataculture. Lucerne the field experiment was carried out in Jingtai, Gansu Province, China in 2021–2022; this study compared and analyzed the effects of three cultivation patterns—ridge tillage with plastic film mulching (PM), ridge tillage with biodegradable film mulching (BM), and traditional flat planting (FP)—on soil water, heat, and fertilizer, as well as lucerne growth, yield, quality, and water and nitrogen use efficiency. The results show that: (1) during the growth period of lucerne, PM and BM treatments augment the average moisture content of the soil layer of 0–120 cm by 31.19% and 24.03% compared to the FP treatment, respectively. In the soil layer of 0–40 cm, PM and BM treatments abate the soil moisture content of the ridges by an average of 19.29% and 7.89% compared to that in the ditches, respectively. In the soil layer of 40–120 cm, PM and BM treatments elevate the soil moisture content of the ridges by 4.40% and 4.65% on average compared to that in the ditches, respectively. The average soil temperature in a soil layer of 5–25 cm shows PM > BM > FP. In contrast with the FP treatment, PM and BM treatments increase the soil temperature of the ridges by an average of 1.87 °C and 0.96 °C and decrease that of the ditches by an average of 0.47 °C and 0.46 °C, respectively. After two years of planting, the three cultivation patterns all promote the soil nutrient content. Compared to the FP treatment, PM and BM treatments increase the organic matter content by 9.94% and 19.94%, respectively. (2) Ridge tillage with film mulching can evidently stimulate the growth of lucerne and enhance yield and quality. Compared to the FP treatment, PM and BM treatments enhance plant height by an average of 15.37% and 4.04%, stem diameter by an average of 34.14% and 14.58%, yield by an average of 21.20% and 14.77%, crude protein content by an average of 13.47% and 7.68%, and relative feed value by an average of 8.71% and 4.41%, respectively. (3) During the two-year growing period, the irrigation amount of lucerne was 508.60–615.30 mm, and the evapotranspiration was 563.70–761.80 mm. Compared to the FP treatment, PM and BM treatments hoist water use efficiency by an average of 43.50% and 17.56%, nitrogen partial factor productivity by an average of 21.20% and 15.22%, and net income by an average of 14.78% and 11.05%, respectively. In summary, in ridge tillage, both ordinary film mulching and biodegradable film mulching can create a favorable soil environment for lucerne growth and heighten production effect. The former has a better effect on advancing the lucerne production effect, and the latter exhibits superior performance in improving soil fertility.

Effects of conventional soil and water conservation measures on soil moisture of sloping land in the loess region

ABSTRACT Traditional soil conservation measures were widely recognized for their excellent ability to promote rainwater infiltration in the loess region. However, little is known about how these measures affect the soil moisture variations under natural rainfall conditions. To compare their effects on soil water content, four different treatments were conducted at runoff plots, i.e., super absorbent polymer amendment (SCR), ridge–furrow rainwater harvesting with plastic mulching (CRP), the same measure with CRP but without mulching (CRN), and flat planting (FSN, control), soil moisture at multiple slope positions and depths were periodically measured. The results showed that in the top 0- to 30-cm soil, SCR and CRN relatively greatly varied with time, yet CRP and FSN changed less. The mean soil water content of these treatments generally followed the pattern of CRN > SCR > CRP > FSN. Responding to a heavy rainfall event, the recharge and depletion rates of soil water storage generally showed similar patterns of SCR > CRN > CRP > FSN in the topsoil, yet in the deeper soil they followed the patterns of CRP > CRN > FSN > SCR. It suggested that SCR and CRN could improve the water accumulation and infiltration performances in the topsoil, and thus may be more suitable for rain-fed crop planting on sloping farmlands of the loess region.

Origin of current intermediate wheatgrass germplasm being developed for Kernza grain production

AbstractIntermediate wheatgrass (IWG, Thinopyrum intermedium [Host] Barkworth & D. R. Dewey) has been developed as a perennial grain crop for human consumption along with providing environmental benefits and ecosystem services. Grain and products derived from IWG cultivars improved for food production have been marketed under the registered trademark, Kernza. Development of IWG as a perennial grain crop began in 1980s with a phenotypic recurrent selection program as the Rodale Institute (RI) and the Big Flats Plant Material Center (BFPMC) used IWG plant introductions (PI) from the National Plant Germplasm System (NPGS) to improve populations of IWG. Initial selections were provided to The Land Institute (TLI) where they were subsequently improved for grain production, yet the identity of the founder material of improved, food-grade IWG has not been publicly documented. Recently recovered original documents have been used to reconstruct the early breeding program to identify the most likely 20 PIs that form the founders of modern food-grade IWG. Molecular data using genotyping-by-sequencing in current elite breeding material, and remnant seed and plant material from the initial RI selections have provided supporting evidence for the historical records. The genetic origin for food-grade IWG is focused between the Black Sea and Caspian Sea in the Stavropol region of Russia, with smaller contributions likely from collections as distant as Kazakhstan in the east to Turkey in the west. This work connects the flow of germplasm and utility of NPGS PIs to present day IWG grain cultivars being developed in multiple breeding programs around the world.

Ridge-furrow planting patterns with film mulching improve water use efficiency by enhancing arbuscular mycorrhizal fungi in the rhizosphere and endophyte of summer maize

In a rainfed agroecosystem with limited water resources, the symbiotic interactions between crop-arbuscular mycorrhizal fungi may have a significant impact on field productivity and water absorption and utilization. However, the interaction between AMF characteristics of root endophyte and rhizosphere soil and water use patterns of summer maize has not been studied under ridge-furrow with film mulching planting patterns (RFPM) in dry farmland. Based on a field experiment, we aimed to reveal the effects of different RFPM planting patterns (i.e., ridge/furrow ratio of 40:70 cm (RF40:70), ridge/furrow ratio of 55:55 cm (RF55:55), and ridge/furrow ratio of 70:40 cm (RF70:40)) on the root water use patterns of summer maize, the distribution characteristics of AMF in root endophyte and rhizosphere soil, and their interaction relationship by using the water isotope (δD and δ18O) tracer technique, the high-throughput sequencing technology, MixSIAR model, and the structural equation models. As a result, compared to flat planting without mulching (FP), RF40:70, RF55:55, and RF70:40 significantly increased grain yield by 29.74%, 35.24%, and 45.53%, and water use efficiency by 23.13%, 35.99%, and 50.25%, across the two growing seasons, respectively (P < 0.05). The root characteristic parameters of summer maize decreased with the increase in soil depth, and were mainly distributed in the shallow layer (0–20 cm) and middle layer (20–60 cm). Compared with FP, the distribution ratio of root surface area density, root length density, and root dry weight density in shallow soil layer was significantly increased by 5.03%, 7.46%, and 9.70% averaging the different RFPM treatments, respectively (P<0.05). Besides, compared to FP, the AMF abundance and diversity in rhizosphere soil and root endogenous averaged RFPM treatments increased by 32.32% and 29.66% and 5.88% and 28.43% respectively, in which the abundance and diversity gradually increased with the increase of the ratio of ridge-furrow. The PLS-PM results found that the larger ridge-furrow ratio could significantly increase the yield and WUE of summer maize mainly by increasing the root surface area density, root length density, and the abundance and diversity of AMF in the root endophyte and rhizosphere soil, which increased the water use of the middle and deep layer soils. In summary, the large ridge-furrow ratio can significantly increase the yield and WUE of summer maize by extending the hyphal network of maize root symbiotic AMF, which increases the water uptake of middle and deep layer soil.

How do novel plant growth regulators and cultivation models strategies affect mechanical strength, lodging resistance and maize productivity in semi-arid regions?

Plant growth regulators are synthetic compounds that have become a significant and technical guarantee for agricultural productivity. In China, "Jindeli", which contains active elements of ethephon and cycocel (EC), has been proven to prevent maize stem elongation, improve maize stem thickness, stem morphology and mechanical strength, root growth, lodging resistance, and yield under various cultivation models. Diethyl aminoethyl hexanoate (DA-6) can promote cell division and growth. From 2020–2021, four growth regulators sprays were used to conduct a field experiment; G1: water spraying; G2: EC spraying; G3: DA-6 spraying; G4: EC+DA-6 spraying under two cultivation models; R: ridge covered with plastic film mulching and T: traditional flat planting without plastic mulching. The results indicated that RG4 treatment considerably decreased plant height, internode length, ear height, lodging rate, and center of gravity height, while improved the internode bending strength, cross-sectional area, cortical thickness, and stem vascular bundles as compared with rest of all other treatments. RG4 treatment considerably improved internode diameter, stem mechanical strength, filling degree, root growth, mean tilt angle, and lignin content, while significantly reducing LAI. In addition, RG4 considerably enhanced the quality of corn stems, such as increasing mechanical properties and enhancing the compressive strength of corn stalks that content of hemicellulose, cellulose, and lignin has been increased. Furthermore, RG4 treatment significantly improved grain yield by optimizing leaf layer structure and increasing bleeding saps levels, increasing the grains per row and ear. Thus, under the RG4 treatment maize lodging rate was decreased 72.1%, and increased WUE (52.8%), and grain yield (46.6%). In conclusion, the results clearly demonstrate that in the semi-arid regions risk of lodging can be avoided by spraying EC+DA-6 with ridge covered plastic film mulching to the enriched stalk quality, shaping plant morphological characteristics, and proving a stable cultivation model to improving maize productivity.

Design and Experiment of a High-Clearance Mid-Tillage Weeder for Dryland Farming

Mechanical weeding is an important technical means for organic and regenerative agricultural systems. Current weed control equipment has a variety of problems, such as difficulty adapting to high-stalk crops and poor operational quality. A high-clearance mid-tillage weeder (HMTW) has been developed to meet the mechanical weed control needs of high-stalk crops. The weeder mainly comprises a suspension device, a frame, parallel four-rod profiling mechanisms, weeding operation components, and depth-limiting soil-cutting devices. Based on the agronomic requirements of dryland flat planting, the overall structure of the HMTW was determined, and the weeding unit and flat shovel hoe were designed. Theoretical analysis was conducted on the depth stability of the HMTW, and an optimization mathematical model of the HMTW was established to further improve its tillage depth stability for agronomic requirements. The optimization objective was to minimize the deflection angle (∆β) of the profiling rod on a vertical plane, and the parameters of the parallel four-rod profiling mechanism were optimized. Based on the optimized structural parameters, a prototype of the HMTW was developed and evaluated. The test results show that the optimized HMTW exhibited a good weeding effect, and the tillage depth stability was within the design operating range. When the driving speed was 1.0 m/s and the tillage depth was 8 cm, the weed removal rate, seedling injury rate, seedling burial rate, and qualified rate of tillage depth were 90.8%, 3.2%, 4.1%, and 94%, respectively. The proposed HMTW successfully meets the weeding agronomic requirements of high-stalk crops for dryland farming, and the performance analysis and optimization models provide technical references for the design and development of such structures.

Enhancing Faba Bean Yields in Alpine Agricultural Regions: The Impact of Plastic Film Mulching and Phosphorus Fertilization on Soil Dynamics

Plastic film mulching is widely used in water and temperature-limited regions to enhance crop yields. Phosphorus (P) fertilization can address deficiencies in soil P availability. In this four-year field experiment conducted in an alpine agricultural area, we explored the effects of nitrogen (N) and P supply imbalance on faba bean cultivation, particularly examining intensified N competition between soil microbes and plants. The randomized block design comprised three film mulching treatments—no film mulching with flat planting (NMF), double ridges and furrows mulched with one plastic film (DRM), and three ridges and furrows mulched with one plastic film (TRM)—and three P levels—P0 (0 kg P ha−1), P1 (9.10 kg P ha−1), and P2 (18.2 kg P ha−1). The results indicated that NMF enhanced soil available N and microbial biomass N (MBN) during early growth stages, consequently improving faba bean yield, nodule weight, total N, and microbial biomass carbon (MBC) compared to DRM and TRM. DRM and TRM exhibited higher soil available N and MBN during later growth stages and higher soil temperature and water content, soil water storage (SWS), soil organic C (SOC), and soil C/N ratio than NMF. In NMF and DRM, P fertilization increased grain yield, nodule weight, SOC, total N, soil C/N ratio, soil available N, and MBC but decreased MBN during early growth stages, and decreased soil water content and SWS. TRM exhibited the opposite trend. P fertilization increased soil total P and available P. Overall, NMF combined with P fertilization (~18.2 kg P ha−1) significantly improved faba bean yield. However, it may also accelerate SOC decomposition, highlighting the need to consider N fertilizer application in this alpine agricultural region.

Productivity, water use efficiency and soil properties of sugarcane as influenced by trash mulching and irrigation regimes under different planting systems in sandy loam soils

IntroductionIn the era of climate change, sugarcane used to face a problem associated with water shortage due to erratic rainfall patterns and lowered water tables. Improved water use efficiency using innovative crop management strategy is needed for sustainable sugarcane production. Trash mulching with different irrigation regimes can effectively modify the plant's hydrothermal micro-environment for increasing cane yield and water productivity.MethodsKeeping this in the background, a field experiment was conducted at Sugarcane Research Institute, RPCAU, Pusa, India, from 2016–17 to 2018–19 to investigate the effects of trash mulching and irrigation regimes on sugarcane productivity, water use efficiency (WUE) and soil properties in different planting systems. The field experiment comprised 12 treatments including four planting methods viz. conventional flat planting (CF; 75 cm row spacing) with trash mulching (6 t ha−1), CF planting (75 cm row spacing) without trash mulching (6 t ha−1), paired row trench (PT) planting (30: 120 cm row spacing) with trash mulching (6 t ha−1), PT planting (30: 120 cm row spacing) without trash mulching (6 t ha−1) and three irrigation schedules consisted of irrigation water (IW); cumulative pan evaporation (CPE) ratio of 0.60, 0.80, and 1.00 was laid out in strip plot design with three replications.Results and discussionThe cane yield (103.5 t ha−1) was found significantly higher in PT planting with trash mulching over the CF planting method with or without mulching. Concerning irrigation regimes using the IW/CPE ratio, it was found that the IW/CPE of 0.6 resulted in 16.9, 13.3% higher water-use efficiency, and 37.1, 40.7% higher water productivity over those under IW/CPE of 0.8, and 1.00, respectively. Furthermore, soil parameters like soil microbial biomass carbon (SMBC) and dehydrogenase activity were increased by 12.5, and 17.5 % due to trash mulching with trench planting as compared to those under conventional flat planting without mulching. The results suggest that planting sugarcane in paired rows and irrigation scheduling at 1.00 IW/CPE with the adoption of trash mulching practices is effective for increasing profitability by way of higher sugarcane productivity and water productivity and also in sustaining soil health.