Plain channel compression members are composed of stiffened (web) and unstiffened (flanges) plate elements. Effective width method (EWM) for the design of cold-formed steel (CFS) compression members accounts for unstiffened and stiffened plate elements through plate buckling coefficient, k of 0.425 and 4.0, respectively in the elastic local buckling stress (fcrl) calculation. The more recent direct strength method (DSM) recommends the local buckling strength equations for the design of plain channel compression members. A lipped stub channel compression member undergoes interaction of local buckling initiated by the stiffened elements and distortional buckling initiated by the partially stiffened flange-lip assembly. Based on finite element analysis (FEA) results, it is demonstrated that such an interaction between buckling modes initiated by the stiffened web and unstiffened flanges is possible in plain channel compression members also. The behavior of plain channels can be represented as an interaction of buckling of the unstiffened flange and stiffened web elements, which is equivalent to local-distortional interaction in lip stiffened channels. The deformation plots are also provided to understand these mode interactions. The present study focuses on stub columns and does not consider the interaction of global buckling mode.