Flame-sampling Molecular-beam Mass Spectrometry Research Articles

The Effect of Carbon–Carbon Double Bonds on the Combustion Chemistry of Small Fatty Acid Esters

Abstract Environmentally friendly biodiesel is a mixture of saturated and unsaturated methyl (or ethyl) esters of long-chain fatty acids. To experimentally examine the effect of C=C double bonds on the combustion chemistry of fatty acid esters, low-pressure premixed laminar flames of four small esters have been studied using flame-sampling molecular-beam mass spectrometry. Mole fraction profiles of reactants, products, and well-identified stable and reactive combustion intermediates in flames of the saturated species methyl propanoate (CH3CH2COOCH 3) and its isomer ethyl acetate (CH3COOCH2CH 3) have been compared with results from flames of the unsaturated fuels methyl propenoate (CH2CHCOOCH 3) and vinyl acetate (CH3COOCHCH 2) flames. A total of eight flames have been studied, with two fuel-rich flame conditions investigated (fuel-equivalence ratios φ=1.2 and 1.56) for each fuel. In addition, the underlying oxidation chemistry at these premixed flame conditions has been investigated using a detailed chemical kinetic reaction mechanism, which is largely based on a previously proposed model for saturated esters [B. Yang et al., Phys. Chem. Chem. Phys. 13 (2011) 7205]. The combined results provide a detailed understanding of the similarities and differences between the combustion of saturated vs. unsaturated esters. Meanwhile, the isomeric and stoichiometric effects on their combustion chemistry are also addressed. In this paper, experimental and modeling details are discussed with a special focus on the different reaction pathways.

Isomer-Specific Influences on the Composition of Reaction Intermediates in Dimethyl Ether/Propene and Ethanol/Propene Flame

This work provides experimental evidence on how the molecular compositions of fuel-rich low-pressure premixed flames are influenced as the oxygenates dimethyl ether (DME) or ethanol are incrementally blended into the propene fuel. Ten different flames with a carbon-to-oxygen ratio of 0.5, ranging from 100% propene (phi = 1.5) to 100% oxygenated fuel (phi = 2.0), are analyzed with flame-sampling molecular-beam mass spectrometry employing electron- or photoionization. Absolute mole fraction profiles for flame species with masses ranging from m/z = 2 (H2) to m/z = 80 (C6H8) are analyzed with particular emphasis on the formation of harmful emissions. Fuel-specific destruction pathways, likely to be initiated by hydrogen abstraction, appear to lead to benzene from propene combustion and to formaldehyde and acetaldehyde through DME and ethanol combustion, respectively. While the concentration of acetaldehyde increases 10-fold as propene is substituted by ethanol, it decreases as propene is replaced with DME. In contrast, the formaldehyde concentration rises only slightly with ethanol replacement but increases markedly with addition of DME. Allyl and propargyl radicals, the dominant precursors for benzene formation, are likely to be produced directly from propene decomposition or via allene and propyne. Benzene formation through propargyl radicals formed via unsaturated C2 intermediates in the decomposition of DME and ethanol is negligibly small. As a consequence, DME and ethanol addition lead to similar reductions of the benzene concentration.

Identification of C5Hx Isomers in Fuel-Rich Flames by Photoionization Mass Spectrometry and Electronic Structure Calculations

The isomeric composition of C(5)H(x) (x = 2-6, 8) flame species is analyzed for rich flames fueled by allene, propyne, cyclopentene, or benzene. Different isomers are identified by their known ionization energies and/or by comparison of the observed photoionization efficiencies with theoretical simulations based on calculated ionization energies and Franck-Condon factors. The experiments combine flame-sampling molecular-beam mass spectrometry with photoionization by tunable vacuum-UV synchrotron radiation. The theoretical simulations employ the rovibrational properties obtained with B3LYP/6-311++G(d,p) density functional theory and electronic energies obtained from QCISD(T) electronic structure calculations extrapolated to the complete basis set limit. For C(5)H(3), the comparison reveals the presence of both the H(2)CCCCCH (i-C(5)H(3)) and the HCCCHCCH (n-C(5)H(3)) isomer. The simulations also suggest a modest amount of cyclo-CCHCHCCH-, which is consistent with a minor signal for C(5)H(2) that is apparently due to cyclo-CCHCCCH-. For C(5)H(4), contributions from the CH(2)CCCCH(2) (1,2,3,4-pentatetraene), CH(2)CCHCCH, and CH(3)CCCCH (1,3-pentadiyne) isomers are evident, as is some contribution from CHCCH(2)CCH (1,4-pentadiyne) in the cyclopentene and benzene flames. Signal at m/z = 65 originates mainly from the cyclopentadienyl radical. For C(5)H(6), contributions from cyclopentadiene, CH(3)CCCHCH(2), CH(3)CHCHCCH, and CH(2)CHCH(2)CCH are observed. No signal is observed for C(5)H(7) species. Cyclopentene, CH(2)CHCHCHCH(3) (1,3-pentadiene), CH(3)CCCH(2)CH(3) (2-pentyne), and CH(2)CHCH(2)CHCH(2) (1,4-pentadiene) contribute to the signal at m/z = 68. Newly derived ionization energies for i- and n-C(5)H(3) (8.20 +/- 0.05 and 8.31 +/- 0.05 eV, respectively), CH(2)CCHCCH (9.22 +/- 0.05 eV), and CH(2)CHCH(2)CCH (9.95 +/- 0.05 eV) are within the error bars of the QCISD(T) calculations. The combustion chemistry of the observed C(5)H(x) intermediates and the impact on flame chemistry models are discussed.