Fixed-wing Unmanned Aerial Vehicle Research Articles

Automated Design Process of a Fixed Wing UAV Maximizing Endurance

Unmanned aerial vehicle (UAV) design necessitates significant effort in prototyping, testing, and design iterations. To reduce design time and improve wing performance, an automated design and optimization framework is proposed utilizing open-source software, including OpenVSP: VSPAERO & Parasite Drag Tool, XFOIL, and Python. This study presents a preliminary UAV wing design methodology, emphasizing weight estimation, drag analysis, stall prediction, and endurance optimization. The maximum takeoff weight of the UAV was calculated after estimating the empty weight using a linear regression from data from 20 existing similar UAVs. The wing and engine sizing were determined using the matching plot technique. A solver with low-fidelity models, combining the Vortex Lattice Method (VLM) and analytical expressions, was used to predict the drag coefficient and maximum lift coefficient of the designed wing. An optimization process using a genetic algorithm was applied to maximize endurance while satisfying requirements such as rate of climb, stall, and maximum speeds. The optimized wing was analyzed with computational fluid dynamics (CFD), and its aerodynamic characteristics were compared with those obtained using VLM and the suggested aerodynamic solver. According to the CFD results, the proposed aerodynamic solver estimated the drag coefficient at zero angle of attack with an error of 17.2% compared to 63.1% using the VLM classic method. The error on the maximum lift coefficient estimation was limited to 5.3%. In terms of optimization, the framework showed an increase in the endurance ratio of up to 2% compared to the Artificial Neural Network method coupled with XFLR5. The primary advantage of the suggested framework is the utilization of open-source software, giving a cost-effective and accessible solution for small and medium-sized startups to design and optimize UAVs to achieve mission objectives.

Hierarchical ADP-ISMC Formation Control of Fixed-Wing UAVs in Local Frames Under Bounded Disturbances

Hierarchical ADP-ISMC Formation Control of Fixed-Wing UAVs in Local Frames Under Bounded Disturbances

An Online Data-Driven Method for Accurate Detection of Thermal Updrafts Using SINDy

Utilizing thermal updrafts shows potential for enabling long-endurance cruising of fixed-wing unmanned aerial vehicles without energy consumption. This article presents a novel online method based on sparse identification of nonlinear dynamics (SINDy) approach to achievement identification of thermal sources in the atmosphere. Initially, the algorithm is incorporated into the upper-level planning system, interacting with the lower-level controller. Then, experiments are conducted through software-in-the-loop simulations (SITL) to validate the implementation of the proposed algorithm. It is found that direct observation of thermal sources through measurements using SINDy is unfeasible during straight and circular flight modes. Nevertheless, simulation analysis of the proposed approach indicates that under unobservable conditions, a portion of the parameters can still be identified. By comparing results obtained using the particle filter algorithm, this method is shown to accurately estimate the parameters with negligible errors under observability conditions. The novelty of this approach lies in its significant improvement of the localization accuracy of the thermal source, without the need for parameter adjustments in the algorithm. Finally, the proposed methods are integrated into commonly used hardware platforms, and their online feasibility is verified through hardware-in-the-loop simulations.

Design and implementation of voice-command controller for fixed-wing unmanned aerial vehicles using automatic speech recognition and natural language processing techniques

This paper explores the development of a voice command controller leveraging the capabilities of an automatic speech recognition (ASR) system and natural language processing (NLP) technique to manage a fixed-wing unmanned aerial vehicle (UAV). The controller is designed to interpret voice commands for controlling fixed-wing UAVs. The implementation of the system involved two key stages: (1) implementation of a voice command controller using integrated ASR and NLP techniques deployed in a simulated plane in the SITL simulator followed by (2) deployment of the controller to an actual Sky Surfer plane fixed-wing aircraft. The results indicate that the algorithm achieved an average confidence rate of 91.86 % in transcribing voice commands to words, with a Word Error Rate (WER) of approximately 0.021. The developed system demonstrated the ability to interpret both low-level and high-level commands for UAV control interfaces. Such an interface offers greater intuitiveness compared to traditional RC controls, potentially requiring less training to operate effectively. Moreover, it reduces human workload, as once commands are issued, the system can execute them without the need for continuous supervision.

3D Modelling and Measuring Dam System of a Pellucid Tufa Lake Using UAV Digital Photogrammetry

The acquisition of the three-dimensional (3D) morphology of the complete tufa dam system is of great significance for analyzing the formation and development of a pellucid tufa lake in a fluvial tufa valley. The dam system is usually composed of the dams partially exposed above-water and the ones totally submerged underwater. This situation makes it difficult to directly obtain the real 3D scene of the dam system solely using an existing measurement technique. In recent years, unmanned aerial vehicle (UAV) digital photogrammetry has been increasingly used to acquire high-precision 3D models of various earth surface scenes. In this study, taking Wolong Lake and its neighborhood in Jiuzhaigou Valley, China as the study site, we employed a fixed-wing UAV equipped with a consumer-level digital camera to capture the overlapping images, and produced the initial Digital Surface Model (DSM) of the dam system. The refraction correction was applied to retrieving the underwater Digital Elevation Model (DEM) of the submerged dam or dam part, and the ground interpolation was adopted to eliminate vegetation obstruction to obtain the DEM of the dam parts above-water. Based on the complete 3D model of the dam system, the elevation profiles along the centerlines of Wolong Lake were derived, and the dimension data of those tufa dams on the section lines were accurately measured. In combination of local hydrodynamics, the implication of the morphological characteristics for analyzing the formation and development of the tufa dam system was also explored.

Automatic Landing Control for Fixed-Wing UAV in Longitudinal Channel Based on Deep Reinforcement Learning

The objective is to address the control problem associated with the landing process of unmanned aerial vehicles (UAVs), with a particular focus on fixed-wing UAVs. The Proportional–Integral–Derivative (PID) controller is a widely used control method, which requires the tuning of its parameters to account for the specific characteristics of the landing environment and the potential for external disturbances. In contrast, neural networks can be modeled to operate under given inputs, allowing for a more precise control strategy. In light of these considerations, a control system based on reinforcement learning is put forth, which is integrated with the conventional PID guidance law to facilitate the autonomous landing of fixed-wing UAVs and the automated tuning of PID parameters through the use of a Deep Q-learning Network (DQN). A traditional PID control system is constructed based on a fixed-wing UAV dynamics model, with the flight state being discretized. The landing problem is transformed into a Markov Decision Process (MDP), and the reward function is designed in accordance with the landing conditions and the UAV’s attitude, respectively. The state vectors are fed into the neural network framework, and the optimized PID parameters are output by the reinforcement learning algorithm. The optimal policy is obtained through the training of the network, which enables the automatic adjustment of parameters and the optimization of the traditional PID control system. Furthermore, the efficacy of the control algorithms in actual scenarios is validated through the simulation of UAV state vector perturbations and ideal gliding curves. The results demonstrate that the controller modified by the DQN network exhibits a markedly superior convergence effect and maneuverability compared to the unmodified traditional controller.

YOLO-RWY: A Novel Runway Detection Model for Vision-Based Autonomous Landing of Fixed-Wing Unmanned Aerial Vehicles

In scenarios where global navigation satellite systems (GNSSs) and radio navigation systems are denied, vision-based autonomous landing (VAL) for fixed-wing unmanned aerial vehicles (UAVs) becomes essential. Accurate and real-time runway detection in VAL is vital for providing precise positional and orientational guidance. However, existing research faces significant challenges, including insufficient accuracy, inadequate real-time performance, poor robustness, and high susceptibility to disturbances. To address these challenges, this paper introduces a novel single-stage, anchor-free, and decoupled vision-based runway detection framework, referred to as YOLO-RWY. First, an enhanced data augmentation (EDA) module is incorporated to perform various augmentations, enriching image diversity, and introducing perturbations that improve generalization and safety. Second, a large separable kernel attention (LSKA) module is integrated into the backbone structure to provide a lightweight attention mechanism with a broad receptive field, enhancing feature representation. Third, the neck structure is reorganized as a bidirectional feature pyramid network (BiFPN) module with skip connections and attention allocation, enabling efficient multi-scale and across-stage feature fusion. Finally, the regression loss and task-aligned learning (TAL) assigner are optimized using efficient intersection over union (EIoU) to improve localization evaluation, resulting in faster and more accurate convergence. Comprehensive experiments demonstrate that YOLO-RWY achieves AP50:95 scores of 0.760, 0.611, and 0.413 on synthetic, real nominal, and real edge test sets of the landing approach runway detection (LARD) dataset, respectively. Deployment experiments on an edge device show that YOLO-RWY achieves an inference speed of 154.4 FPS under FP32 quantization with an image size of 640. The results indicate that the proposed YOLO-RWY model possesses strong generalization and real-time capabilities, enabling accurate runway detection in complex and challenging visual environments, and providing support for the onboard VAL systems of fixed-wing UAVs.

Control of a fixed wing unmanned aerial vehicle using a higher-order sliding mode controller and non-linear PID controller

Unmanned aerial vehicles (UAVs) have seen a rise in use during the last few years. Such aircrafts are now a convenient way to complete dangerous, dirty, and tedious tasks. Given that their operation involves a control problem which is non-linear and coupled, it is difficult to analyse. This paper presents the modeling and control of a fixed-wing unmanned aircraft as a contribution to this field. The system’s flight dynamics is derived using Newton’s second law of motion. The system is designed to have a non-linear Proportional Integral Derivative (NPID) controller and a higher-order sliding mode controller (HOSMC). When simulating the system using MATLAB Simulink software, an external disturbance was added to test the robustness of the controllers. Five performance indices which include mean square error (MSE), integral time square error (ITSE), integral absolute error (IAE), integral time absolute error (ITAE), and integral square error (ISE), were used to compare the controllers performance. These indices are used to provide a numerical assessment of the two controllers’ performance. The outcomes demonstrate that the roll, pitch, and yaw states performed better than the super-twisting sliding mode controller. On the airspeed control, the non-linear PID performed better than the super-twisting sliding mode controller.

Deep Reinforcement Learning based Running-Track Path Design for Fixed-Wing UAV Assisted Mobile Relaying Network

This paper studies a fixed-wing unmanned aerial vehicle (UAV) assisted mobile relaying network (FUAVMRN), where a fixed-wing UAV employs an out-band full-duplex relaying fashion to serve a ground source-destination pair. It is confirmed that for a FUAVMRN, straight path is not suitable for the case that a huge amount of data need to be delivered, while circular path may lead to low throughput if the distance of ground source-destination pair is large. Thus, a running-track path (RTP) design problem is investigated for the FUAVMRN with the goal of energy minimization. By dividing an RTP into two straight and two semicircular paths, the total energy consumption of the UAV and the total amount of data transferred from the ground source to the ground destination via the UAV relay are calculated. According to the framework of Deep Reinforcement Learning and taking the UAV's roll-angle limit into consideration, the RTP design problem is formulated as a Markov Decision Process problem, giving the state and action spaces in addition to the policy and reward functions. In order for the UAV relay to obtain the control policy, Deep Deterministic Policy Gradient (DDPG) is used to solve the path design problem, leading to a DDPG based algorithm for the RTP design. Computer simulations are performed and the results show that the DDPG based algorithm always converges when the number of training iterations is around 500, and compared with the circular and straight paths, the proposed RTP design can save at least 12.13% of energy and 65.93% of flight time when the ground source and the ground destination are located 2000 meters apart and need to transfer 5000bit/Hz of data. Moreover, it is more practical and efficient in terms of energy saving compared with the Deep Q Network based design.

Fixed-wing UAV obstacle avoidance algorithm based on real terrain

Abstract This paper presents an obstacle avoidance algorithm for UAVs based on real terrain constraints. The common obstacle avoidance algorithm often abstracts the obstacle as a sphere or a circle or studies the UAV’s two-dimensional obstacle avoidance on a raster map. With the development of fixed-wing UAVs, UAVs have longer and longer time in the air, longer and longer range, and the low-altitude environment they face is often difficult to simulate with simplified regular shape. Thus, this paper constructs the UAV flight terrain environment using open elevation data and designs an obstacle avoidance algorithm accordingly. When the UAV is tracking the track point, it can better control the UAV to avoid obstacles and fly to the target track point.

Small Fixed-Wing Unmanned Aerial Vehicle Path Following Under Low Altitude Wind Shear Disturbance

Small Fixed-Wing Unmanned Aerial Vehicle Path Following Under Low Altitude Wind Shear Disturbance

Fault-tolerant model predictive sliding mode control for trajectory replanning of multi-UAV formation flight

To tackle the trajectory-following problem of multiple unmanned aerial vehicles (UAVs) characterized by high non-linearity and strong coupling, this paper methodologically separates the dynamics of fixed-wing UAVs into two subsystems and designs appropriate controllers for each loop. Unlike previous works, the proposed multi-purpose method simultaneously accounts for constraints, computational time, external disturbances, and actuator faults. The inclusive structure of the proposed strategy is as follows: Firstly, in the outer loop, by employing the high precision and constraint-handling attributes of nonlinear model predictive control (NMPC), the trajectories of the agents are guided to their reference positions while considering spatial limitations, including no-fly zone evasion and inter-vehicle collision evasion. Then, the optimal states of the inner loop are designed. Secondly, in the inner loop, a fault-tolerant sliding mode predictive control (SMPC) is reconfigured to accommodate identified actuator faults and follow the optimal states produced by NMPC. The effectiveness of the suggested algorithm is verified through a series of simulation results. Comparison simulation results substantiate the ascendancy of the suggested dual-loop method over the NMPC trajectory replanning algorithm.

Thermal Monitoring of an Internal Combustion Engine for Lightweight Fixed-Wing UAV Integrating PSO-Based Modelling with Condition-Based Extended Kalman Filter

The internal combustion engines of long-endurance UAVs are optimized for cruises, so they are prone to overheating during climbs, when power requests increase. To counteract the phenomenon, step-climb maneuvering is typically operated, but the intermittent high-power requests generate repeated heating–cooling cycles, which, over multiple missions, may promote thermal fatigue, performance degradation, and failure. This paper deals with the development of a model-based monitoring of the cylinder head temperature of the two-stroke engine employed in a lightweight fixed-wing long-endurance UAV, which combines a 0D thermal model derived from physical first principles with an extended Kalman filter capable to estimate the head temperature under degraded conditions. The parameters of the dynamic model, referred to as nominal condition, are defined through a particle-swarm optimization, minimizing the mean square temperature error between simulated and experimental flight data (obtaining mean and peak errors lower than 3% and 10%, respectively). The validated model is used in a so-called condition-based extended Kalman filter, which differs from a conventional one for a correction term in section prediction, leveraged as degradation symptom, based on the deviation of the model-state derivative with respect to the actual measurement. The monitoring algorithm, being executable in real-time and capable of identifying incipient degradations of the thermal flow, demonstrates applicability for online diagnostics and predictive maintenance purposes.

Design and Implementation of A Low-Cost Parachute Landing System for Fixed-Wing Mini Unmanned Aerial Vehicles

Fixed-wing mini-UAVs (Unmanned Aerial Vehicles) face difficulties due to the need for runways during take-off and landing. While fixed-wing UAVs are capable of using catapults during take-off, various landing systems are required for landing. Therefore, in this study, a parachute system design and production were carried out for the safe landing of fixed-wing mini-UAVs. The produced parachute utilized ultra-lightweight ripstop nylon fabric and suspension lines, while a carbon fiber tube was chosen for the launching system for its lightweight and strength. The parachute deployment system was triggered by a servo motor with low power consumption and high torque. During tests, the parachute was activated at a height of 47 meters during flight. The parachute deployment was completed in 1.42 seconds, and the descent with the parachute lasted 11 seconds. The vertical descent speed of the parachute during landing was measured at 4.27 m/s. The produced parachute landing system was manufactured at 71% lower cost compared to existing parachute landing systems in the literature and on the market. Additionally, the ultra-light ripstop parachute weighed 56 grams, making it 12% lighter than similar systems. Considering the advantages in terms of cost and weight, it is anticipated that parachute landing systems will be increasingly used for fixed-wing UAVs in the future.

Measurement-Based Tapped Delay Line Channel Modeling for Fixed-Wing Unmanned Aerial Vehicle Air-to-Ground Communications at S-Band

Fixed-wing unmanned aerial vehicles (UAVs) are widely considered as a vital candidate of aerial base station in beyond Fifth Generation (B5G) systems. Accurate knowledge of air-to-ground (A2G) wireless propagation is important for A2G communication system development and testing where, however, there is still a lack of A2G wideband channel models for such a purpose. In this paper, we present a wideband fixed-wing UAV-based A2G channel measurement campaign at 2.7 GHz, and consider typical flight phases, based on which a wide-sense stationary uncorrelated scattering (WSSUS)-based tapped delay line (TDL) wideband channel model is proposed. Parameters of individual channel taps are analyzed in terms of gain, amplitude distribution, Rice factor and delay-Doppler spectrum. It is shown that UAV flight phases significantly influence the channel tap parameters. Particularly, the “Bell”-type spectrum is found to be the most suitable model for the delay-Doppler spectrum under various flight scenarios for A2G propagation. The proposed channel model can provide valuable assistance and guidance for UAV communication system evaluation and network planning.

Parameter tuning for active disturbance rejection control of fixed-wing UAV based on improved bald eagle search algorithm

PurposeThis paper aims to develop a method for tuning the parameters of the active disturbance rejection controller (ADRC) for fixed-wing unmanned aerial vehicles (UAVs). The bald eagle search (BES) algorithm has been improved, and a cost function has been designed to enhance the optimization efficiency of ADRC parameters.Design/methodology/approachA six-degree-of-freedom nonlinear model for a fixed-wing UAV has been developed, and its attitude controller has been formulated using the active disturbance rejection control method. The parameters of the disturbance rejection controller have been fine-tuned using the collaborative mutual promotion bald eagle search (CMP-BES) algorithm. The pitch and roll controllers for the UAV have been individually optimized to obtain the most effective controller parameters.FindingsInspired by the salp swarm algorithm (SSA), the interaction among individual eagles has been incorporated into the CMP-BES algorithm, thereby enhancing the algorithm's exploration capability. The efficient and accurate optimization ability of the proposed algorithm has been demonstrated through comparative experiments with genetic algorithm, particle swarm optimization, Harris hawks optimization HHO, BES and modified bald eagle search algorithms. The algorithm's capability to solve complex optimization problems has been further proven by testing on the CEC2017 test function suite. A transitional function for fitness calculation has been introduced to accelerate the ability of the algorithm to find the optimal parameters for the ADRC controller. The tuned ADRC controller has been compared with the classical proportional-integral-derivative (PID) controller, with gust disturbances introduced to the UAV body axis. The results have shown that the tuned ADRC controller has faster response times and stronger disturbance rejection capabilities than the PID controller.Practical implicationsThe proposed CMP-BES algorithm, combined with a fitness function composed of transition functions, can be used to optimize the ADRC controller parameters for fixed-wing UAVs more quickly and effectively. The tuned ADRC controller has exhibited excellent robustness and disturbance rejection capabilities.Originality/valueThe CMP-BES algorithm and transitional function have been proposed for the parameter optimization of the active disturbance rejection controller for fixed-wing UAVs.

Online Trajectory Replanning for Avoiding Moving Obstacles Using Fusion Prediction and Gradient-Based Optimization

In this study, we introduce a novel method for an online trajectory replanning approach for fixed-wing Unmanned Aerial Vehicles (UAVs). Our method integrates moving obstacle predictions within a gradient-based optimization framework. The trajectory is represented by uniformly discretized waypoints, which serve as the optimization variables within the cost function. This cost function incorporates multiple objectives, including obstacle avoidance, kinematic and dynamic feasibility, similarity to the reference trajectory, and trajectory smoothness. To enhance prediction accuracy, we combine physics-based and pattern-based methods for predicting obstacle movements. These predicted movements are then integrated into the online trajectory replanning framework, significantly enhancing the system’s safety. Our approach provides a robust solution for navigating dynamic environments, ensuring both optimal and secure UAV operation.

Fully actuated system approach-based fault-tolerant formation reconstruction control and optimal task assignment for fixed-wing UAVs

Fully actuated system approach-based fault-tolerant formation reconstruction control and optimal task assignment for fixed-wing UAVs

Prediction method for 4D trajectory of large fixed wing UAV under multi-layer convolution and bidirectional gating model

Abstract With the increase of low-altitude flight tasks, the importance of research on low-altitude flight safety and efficient operation has gradually become prominent. Therefore, it is necessary to try to establish a low-altitude airspace flight path pre-planning method based on 4D trajectory prediction, which can effectively support the above research. In order to improve the integrity, accuracy and reliability of the long-range trajectory prediction results of large fixed wing UAV (LFW UAV), based on the standard neural network as the basic concept to form a fusion model of improved convolutional neural network (CNN) and bidirectional gated recurrent neural network (BIGRU). At the same time, the flight trajectory fitting preprocessing is added to build the completed multilayer cyclic convolutional improvement model (MCCI). The experimental results show that the MCCI model has obvious advantages in terms of prediction accuracy, deviation range and predictable duration when dealing with the LFW UAV 4D trajectory prediction problem, and better reflects the characteristics of 3D position and spatiotemporal elements. The comparative analysis shows that the error values of the MCCI model are smaller than those of the comparison prediction models in any dimension, and the prediction results have better fit and model performance.

Runway-Free Recovery Methods for Fixed-Wing UAVs: A Comprehensive Review

Fixed-wing unmanned aerial vehicles (UAVs) have the advantages of long endurance and fast flight speed and are widely used in surveying, mapping, monitoring, and defense fields. However, its conventional take-off and landing methods require runway support. Achieving runway-free recovery is necessary for expanding the application of fixed-wing UAVs. This research comprehensively reviews the various techniques and scenarios of runway-free recovery of fixed-wing UAVs and summarizes the key technologies. The above methods cover parachute recovery, net recovery, rope recovery, SideArm recovery, deep stall recovery, towed drogue docking recovery, and robotic arm recovery methods within runway-free recovery. Finally, this research discusses the future research directions of runway-free recovery.