Fixation Techniques Research Articles

Examining Clinical Practice and Short-Term Results in Ventral Hernia Repair

Background and Objectives: This prospective observational study conducted at Parul Sevashram Hospital, Vadodara aimed to examine the diversity in surgical techniques used for primary and incisional ventral hernia repair (VHR). Methods: Twenty-five elective VHR patients treated from January 1, 2023, to March 31, 2023, were enrolled. Patients were monitored for 90 days post-surgery. Exclusion criteria included patients under 18 years old and those undergoing emergency surgeries. The primary objective was to compare surgical approaches between primary and incisional hernia repairs. Secondary objectives focused on intraoperative procedures such as mesh selection, fixation techniques, and drain placement, as well as evaluating postoperative outcomes at 3 months, including infection rates, surgical site issues, mortality, and readmission rates within 90 days. Results: Data from 25 patients were analysed: 14 (58%) had primary hernias (PH) and 11 (42%) had incisional hernias (IH), including 1 (9.09%) recurrent case. – PH Group: Procedures included 6 (42.85%) open Onlay, 4 (28.57%) open Sublay, 1 (7.14%) intraperitoneal Onlay meshplasty (IPOM), and 3 (21.42%) suture repairs. Complications: 7% seroma, 0% surgical site infection (SSI), 0% recurrence. – IH Group: Procedures included 7 (63.63%) open Onlay, 3 (27.3%) open Sublay, and 1 (9.09%) suture repair. Complications: 9% seroma, 9% hematoma, 0% SSI, 9% wound sinus, 0% recurrence. Conclusion: Onlay meshplasty emerged as the predominant procedure for both primary and incisional hernias. However, open Sublay repair showed promising results with fewer seroma-related complications. Standardizing guidelines could optimize outcomes in VHR.

Extra axial bone ablation with augmentation

Pelvic bone metastases frequently result in severe pain and disability. Open surgical reconstruction is associated with a high complication and mortality rate. Percutaneous screw fixation is a minimally invasive treatment that is safe and effective for the management of periacetabular metastases. This article details our technique for pelvic screw fixation, including (1) perioperative care, (2) navigation and needle guidance, (3) access, (4) biopsy and ablation, (5) screw placement, and (6) cement augmentation.

A novel technique for C1-C2 posterior screw insertion using patient-specific guides created by CT-based 3D printing.

C1-C2 fixation has been developed for the rigid fusion of atlantoaxial instability. C1 lateral mass screw (C1 LMS)-C2 pedicle screw fixation is used more frequently due to its rigid fixation and high bone fusion rate. However, C1 screw placement is relatively unsafe even with recently developed image-based navigation systems. Patient-specific screw guide templates (PSGT) were developed to improve the accuracy and safety of C1 screw placement. Herein, we investigated the outcomes of the C1-C2 posterior fixation technique using PSGT. This was a retrospective study of six patients who underwent posterior cervical spinal fusion using the PSGT between January 2022 and April 2023. Operative time, estimated blood loss, intraoperative radiation dose, surgical cost, and screw placement accuracy were evaluated and compared with those achieved with preoperative CT-based navigation (navigation group, n = 15). Screw accuracy was assessed using Neo's classification. PSGT showed good results, although the differences were not statistically significant (operation time: 104.3 ± 9.7 min vs 116.4 ± 20.8 min; estimated blood loss: 56.7 ± 72.4 mL vs 123.2 ± 162.3 mL; and radiation dose: 1.8 ± 1.2 mSv vs 2.6 ± 0.8 mSv, respectively). PSGT was particularly better in terms of the accuracy of C1 LMS (PSGT: 100%, navigation: 83.3%). The deviation at the entry point was minimal, and the difference between the sagittal and transversal angles from the preoperative plan was small. We investigated the clinical efficacy of using the PSGT for C1-C2 posterior fixation. PSGT improved the accuracy of C1 LMS insertion.

Is headless screw a valid alternative for the fixation of Chevron olecranon osteotomy? A biomechanical comparison of 4 fixation methods

BackgroundChevron osteotomy is a popular technique for repairing complex distal humerus intraarticular fractures. However, re-fixation presents challenges like hardware prominence and soft tissue damage. Headless cannulated screws are gaining popularity for fixation due to better bone purchase and less irritation. This study aims to compare different fixation strategies with headless screws for chevron osteotomy fixation. MethodsThis study utilized 32 polyurethane foam ulna specimens for biomechanical testing. The Chevron osteotomy was performed with an oscillating saw for all specimens. Four different techniques were used for re-fixation: modified tension band wire fixation, plate-screw fixation, cannulated screw fixation, and headless cannulated screw fixation. The constructs were mounted to the testing machine, simulating the elbow in 90 degrees of flexion. All specimens were tested under axial traction. Displacements at 350N and 500N and loads at the failure were recorded. ResultsAt the load of the implant failure, headless cannulated screw fixation revealed higher force values when compared to the other constructs, and modified tension band wire fixation showed lower force values compared to the other three groups (p < 0.001). The headless cannulated screw fixation group showed no significant differences in osteotomy displacements when tested to a 350N load. There were no significant differences in displacements at a 500N load between the four groups (p = 0.275). ConclusionThis study suggests that headless cannulated screw fixation is a viable and effective option for Chevron osteotomies. Headless cannulated screw fixation makes it a promising alternative to traditional fixation methods. This technique may be a more reliable fixation technique during daily activities and moderate elbow motions, indicating that it has the potential to succeed.

Anterior Chamber Intraocular Lens Implantation Versus Four-Flanged Scleral Fixation Technique for Patients With Loss of Capsular Support During Routine Cataract Surgery.

To compare the outcomes of anterior chamber intraocular lens (AC-IOL) implantation versus the four-flanged scleral fixation technique in eyes with loss of capsular support during routine cataract surgery. This was a retrospective cohort study of all patients in whom an IOL was implanted either during or after short-term aphakia due to loss of capsular and sulcus support in a routine cataract surgery with at least 6 months of follow-up time between 2015 and 2023 in a tertiary medical center in Israel. Two different IOL implantation techniques were compared: the implantation of an angle-supported ACIOL and four-flanged scleral fixation. Main outcome measures included postoperative complications such as pseudophakic bullous keratopathy, loss of intraocular pressure control and glaucoma, IOL subluxation, and retinal detachment. Sixty-five eyes of 65 patients were included in the study, 33 eyes in the AC-IOL group and 32 eyes in the flange group. Follow-up time was 29.92 ± 20.02 months in the AC-IOL group and 20.17 ± 15.56 months in the flange group (P = .087). Pseudophakic bullous keratopathy was observed in 10 (30.3%) patients in the AC-IOL group and in 1 (3.1%) patient in the flange group (P = .04). This association remained significant using survival analysis (P = .006). In 4 (12.1%) patients in the AC-IOL group, a glaucoma filtering procedure was performed to control the intraocular pressure compared with none in the flange group (P = .042). In the setting of loss of capsular support during routine cataract surgery, four-flanged scleral fixation showed an overall lower rate of complications and significantly reduced rate of subsequent surgical interventions. [J Refract Surg. 2024;40(8):e520-e526.].

Medial plating of distal femur: which pre-contoured angular stable plate fits best?

Distal femur fractures comprise approximately 4% of all femoral fractures, with lateral plating being a common fixation technique. In recent years, dual plating with an additional medial plate has shown added benefit for Arbeitsgemeinschaft für Osteosynthesefragen C-type fractures, comminuted, osteoporotic distal femur fractures and non-union or malunion complications postsingle lateral plating. However, to our knowledge, there is no commercially available distal femur medial plate for fracture fixation. The aim of our study was to determine which of our current commercially available pre-contoured plates fit the medial distal femur best in an Asian population. We evaluated 13 different pre-contoured angular plates on standardized sawbone models. The plates were first applied onto the medial distal femur and subsequent anterior-posterior and lateral radiographs were taken postapplication. The appropriateness of the fit of each plate was objectively compared using a scoring system derived from pre-determined plate- and screw-related factors. The proximal humerus internal locking system plate had the best anatomical fit with the highest 'best fit score,' followed by the variable angle proximal tibia plate. While non-anatomical plates may be successfully utilized, in view of the anatomical variations of the femur, ultimately an anatomical plate for the medial distal medial femur should be developed for ease of fixation.

Biomechanical and clinical outcomes after distal biceps tendon reattachment using an endo button technique and an interference screw

ContextRupture of the long head of the distal bifid biceps tendon is a rare injury, for which surgical anatomical repair should be considered in active patients. The aim of this study was to review our patients who benefited from the Endobutton technique via a single anterior approach, comparing the clinical outcomes with the contralateral uninjured side and assessing their quality of life. Our hypothesis was that an "anatomical" insertion, through an anterior approach, by reinserting the two distinct tendons on the radial tuberosity, would restore the supination ability of the forearm more effectively than flexion strength. MethodsThis study included 25 patients who underwent surgery between June 2015 and January 2021. All patients underwent distal biceps reattachment using an endo-osseous fixation technique with the same device. Each patient completed a quality-of-life questionnaire and participated in biomechanical performance tests. ResultsWe observed a significant 14% reduction in strength during flexion on the operated side compared to the healthy side. However, no significant differences in strength were found for supination, extension, and pronation between the operated and non-operated limbs in these same patients. In terms of endurance, flexion on the operated side tended to exhibit greater endurance than on the healthy side, while endurance in supination appeared similar between the operated and healthy sides. This finding held irrespective of whether the operated limb was dominant or non-dominant. We also discovered a strong correlation between the time elapsed since surgery and differences in strength during both flexion and supination. ConclusionThe ultimate goal is to achieve an anatomical surgical repair to restore all functions and maximize patient outcomes. As demonstrated, we have obtained good clinical results with Endobutton repair and a single anterior approach. The results in terms of strength and endurance are similar to those reported in the literature, and all our patients are satisfied. No postoperative complications were found.

Comparing two common posterior C1–C2 fixation techniques for treating odontoid fractures in the aging spine: insights from a cadaveric model using osteoporotic spines

Comparing two common posterior C1–C2 fixation techniques for treating odontoid fractures in the aging spine: insights from a cadaveric model using osteoporotic spines

The New Alternative Technique Outcomes: Atlas Lateral Mass Screw and C2-3 Transfacet Screw Fixation for Complex Atlantoaxial Instability in Patients with Thin C2 Pedicle or High-Riding Vertebral Artery

The study aimed to evaluate the safety, feasibility, effect on fusion, and clinical efficacy of atlas lateral mass and C2-3 transfacet screw fixation technique, serves as an alternative method to traditional posterior atlantoaxial fixation. Patients with atlantoaxial instability who underwent atlas lateral mass and C2-3 transfacet fixation surgery were included. The duration of the surgery and the quantity of blood lost during the operation were recorded. Patients were monitored via X-ray and computed tomography scans to evaluate the degree of fusion at the 1-month and 12-month follow-up. The Neck Visual Analog Scale and Neck Disability Index were evaluated preoperatively, in the postoperative first week, and at the 12-month follow-up for clinical follow-up. A total of 8 patients with atlantoaxial instability due to odontoid fracture or Arnold- Chiari malformation accompanied by bony or vascular abnormalities were included in the study between 2017 and 2024. All 8 patients underwent successful atlas lateral mass and C2-3 transfacet screw fixation, with no neurovascular injury noted during surgery. All patients with fracture exhibited fusion at the 12-month mark, and both the Neck Visual Analog Scale and Neck Disability Index scores demonstrated significant improvement at both the 1-week and 12-month postoperative periods (P < 0.05). The atlas lateral mass and C2-3 transfacet screw fixation technique, an alternative to conventional posterior fixation, has been demonstrated to be an efficacious method for providing adequate stabilization and fusion in patients with atlantoaxial instability, even in the cases of thin C2 pedicle, high-riding vertebral artery, previous failed surgeries, or reoperation.

Trocar-assisted extraocular technique for intrascleral intraocular lens fixation using a 90°-curved forceps: a modified extraocular forceps-guided technique.

To investigate the surgical outcomes of intrascleral intraocular lens (IOL) fixation using a modified extraocular forceps-guided technique. Retrospective case series. Overall, 81 eyes of 78 patients who underwent intrascleral IOL fixation using the modified extraocular forceps-guided technique were included. The procedure entailed creating 2 scleral half-layer T-shaped incisions perpendicular to the main incision and forming a scleral tunnel. A 25-gauge trocar was inserted at the lower end of the T-shaped incision to perform vitrectomy. A 27-gauge needle was inserted from the left-hand port, and the leading haptic was inserted into the needle lumen. After removal of the right-hand trocar, a 90°-curved intrascleral fixation forceps was inserted into the eye, exposing the tip at the main incision, thus allowing the tip of the extraocular trailing haptic to be gripped and both haptics to be pulled out. The left-hand trocar was removed, and the haptics were buried in the scleral tunnel. The surgical outcomes of this technique were retrospectively evaluated on the basis of the medical records. The induction of haptics was successful in all cases. The preoperative best-corrected visual acuity improved from 0.35±0.68 to 0.12±0.36 logMAR postoperatively (P<0.01). The refractive error was -0.27±0.87 D; IOL decentration, 0.39±0.18 mm; IOL tilt, 5.97±2.65°; IOL astigmatism, 0.35±0.36 D; and corneal endothelial cell loss, 10.3±12.7%. There were no serious complications related to the surgical technique. The modified extraocular forceps-guided technique allows for safe and straightforward induction of the trailing haptics and enables the performance of intrascleral IOL fixation with minimal scleral incisions.

COMPARATIVE ASSESSMENT OF BONE FIXATION METHODS IN CRANIOFACIAL SURGERIES: A systematic review

Bone fixation plays a crucial role in craniofacial surgeries, being essential for the correction of cranial and facial deformities, as well as for stabilization after trauma or reconstructive surgery. This article presents a systematic review of the different bone fixation methods used in craniofacial surgeries, including plates and screws, rigid internal fixation, external fixation and biological techniques. The aim is to compare the efficacy, safety and clinical outcomes of these methods, providing valuable insights to guide clinical practice.

A new technique for percutaneous screw fixation for treating FFP IIIa and IIIb fragility fractures of the pelvis

To determine the presence of a consistent osseous corridor from the lateral-posterior aspect of the anterior inferior iliac spine to the sacral wing that could be used for safe trans percutaneous screw fixation for pelvic fragility fractures of the iliac wing and fracture dislocations of the sacroiliac joint (FFP types IIIa and IIIb). Computed tomography (CT) scans were obtained from 100 patients and imported to Mimics software for 3D reconstruction. Then, a cylinder was drawn to imitate the modified LC-II screw and adjusted to a maximum radius and length to obtain the feasible region. Thirteen parameters of the osseous corridor of the modified LC-II screw were measured. Differences between sex groups were compared, and significant statistical correlations were carefully studied to determine potentially important clinical relationships. The records of patients with FFP type IIIa and IIIb fragility fractures of the pelvis were extracted from our hospital. Patients who underwent modified LC-II screw fixation, LC-II screw fixation or reconstruction plate fixation were included. Patients’ operative characteristics and complications were recorded at follow-up. Fracture reduction quality was assessed using the Matta standard. Functional outcomes were evaluated using the Majeed grading system. The mean maximum diameters of the osseous corridors of the modified LC-II screw in males and females were 12.73 and 10.83 mm, respectively. The mean maximum lengths of the osseous corridors of the modified LC-II screw in males and females were 96.37 and 93.37 mm, respectively. In the treatment of patients with FFP IIIa and FFP IIIb fractures, the group of treatment by the modified LC-II screws fixation was shown significantly shorter operative time and fewer intraoperative blood loss in comparison to that by the reconstruction plates. In the present study, all the males and females had a complete osseous corridor of the modified LC-II screw. The clinical results of the patients who were treated with modified LC-II screw fixation suggest that the novel method has a good preliminary outcome.

Comparative study of stabilization of a displaced midshaft clavicle fracture with either an intramedullary nail fixation or a superiorly placed plate.

This retrospective study compares two techniques of fixation of midshaft clavicle fractures: nail fixation versus plate fixation. We compared titanium elastic nail fixation with plate fixation in patients with uncomplicated midshaft clavicle fractures. In total, 84 patients were included in our study: 35 in the nail fixation group and 49 in the plate fixation group. We compared the 12-month postoperative shoulder function and scar assessment. Primary outcome was measured by the DASH score and POSAS score. Secondary outcome was measured by Constant score, surgery complications, implant removal, hospitalization days, and size and quality of the scar. Here was no significant difference in DASH and Constant scores between the two groups. However, the nail group leads in the POSAS (12 (12 - 12) 25 (17 - 30) p < 0.001) and in all scar parameters (size, scar influence). There were no significant differences in the complications despite implant removal where more removals were noted in the nail group (16 (44.4%) 4 (8.3%) p < 0.001). Fixation of uncomplicated midshaft clavicle fractures with nail provides better cosmetic results and scar quality than fixation with plate, and presents no significant differences in functional ability or complications.

Comparison of Conventional Technique with Suture Fixation and Subperiosteal Tight Pocket Technique on Revision Cochlear Implantation Rate.

Several fixation methods have been described to secure the cochlear implant's receiver/stimulator, but the optimal stabilization technique is still being debated. The aim of this study was to compare the conventional technique with suture fixation to the subperiosteal tight pocket technique in terms of revision cochlear implantation rate. A retrospective review was conducted on the medical records of 649 patients who underwent cochlear implantation. The study participants were divided into different groups regarding the applied surgery technique. The relationship between the fixation technique, revision rates, and the cause of revisions related to techniques was investigated. The overall revision rate was 2.9% (19 out of 649). There were 14 (3.5%) and 5 (2%) revision implantations in the subperiosteal tight pocket and conventional technique groups, respectively. The incidence of device failure was 2.5%, and it constituted the primary cause for revision surgery in both groups. Even though patients who had the subperiosteal tight pocket technique had a much higher rate of device failure, the results indicate that there was no significant difference between the groups, as evidenced by a P-value of .12. The conventional and subperiosteal tight pocket techniques can both be safely preferred with low revision rates in patients undergoing cochlear implantation.

Implantation of S1AIS has priority as a sacroiliac joint fixation technique.

The sacral alar-iliac screw (SAIS) fixation technique has evolved from spinopelvic fixation which originated from S2AIS to sacroiliac joint fixation, with more reports regarding its application of S2AIS than S1AIS. However, there is a lack of comparative evidence to determine which technique is superior for sacroiliac joint fixation. This study aimed to determine which of the screws was superior in terms of implantation safety and biomechanical stability for sacroiliac joint fixation. CT data of 80 normal pelvises were analyzed to measure the insertable range, trajectory lengths and widths of both S1AIS and S2AIS on 3D reconstruction models. Φ 6.5mm and 8.0mm screws were implanted on the left and right sides of fifty 3D printed pelvic models respectively to observe for breach of screw implantation. Ten synthetic pelvis models were used to simulate type C Tile injuries, and divided into 2 groups with an anterior plate and posterior fixation using one S1AIS or S2AIS on each side. The stiffness and maximum load of the plated and fixated models were measured under vertical loading. The trajectory lengths and widths of the S1AIS and S2AIS were similar (p > 0.05) and there was no breach for Φ 6.5mm SAIS. However, both the insertable range and trajectory length on the sacral side of S2AIS (234.56 ± 10.06mm2, 40.97 ± 2.81mm) were significantly less, and the breach rate of the posterior lateral cortex of the Φ 8.0mm S2AIS (46%) was significantly higher than the S1AIS (307.55 ± 10.42 mm2, 42.16 ± 3.06mm, and 2%, p < 0.05). The stiffness and maximum load of S2AIS were less than S1AIS but the difference was not statistically significant (p > 0.05). S1AIS and S2AIS have similar screw trajectories and stability. However, S1AIS has a larger insertable range, less breach of the posterior lateral sacral cortex and longer trajectory length on the sacral side than S2AIS, which indicates S1AIS has higher implantation safety and a trend of better mechanical performance over S2AIS for sacroiliac joint fixation. Furthermore, S2AIS with an excessively large diameter should be used with caution for sacroiliac joint fixation.

Long-Term Surgical Outcomes of Scleral Flap versus Scleral Pocket Technique for Sutureless Intrascleral One-Piece Lens Fixation.

Objectives: This study compared long-term surgical outcomes of the scleral flap versus scleral pocket technique for sutureless intrascleral one-piece intraocular lens (IOL) fixation. Methods: A retrospective comparative study was conducted at a single center, involving consecutive patients undergoing sutureless intrascleral one-piece IOL implantation, between January 2020 and May 2022. Eyes were divided into two groups based on the surgical technique: group 1 underwent scleral flap (n = 64), and group 2 received scleral pocket technique (n = 59). Visual acuity, refractive outcomes, and complications were assessed over a minimum 24-month follow-up period. Results: Both groups showed improvements in best-corrected visual acuity (BCVA), increasing from 0.84 ± 0.56 logMAR at baseline to 0.39 ± 0.23 logMAR (p = 0.042) at 24 months in group 1 and from 0.91 ± 0.63 logMAR at baseline to 0.45 ± 0.38 logMAR (p = 0.039) at 24 months in group 2. No significant differences in BCVA were observed between the groups at baseline (p = 0.991), 12 (p = 0.496) and 24 months (p = 0.557). Mean spherical equivalent (-0.73 ± 1.32 D in group 1 and -0.92 ± 0.99 D in group 2, p = 0.447), refractive prediction error (-0.21 ± 1.1 D in group 1 and -0.35 ± 1.8 D in group 2, p = 0.377), and surgically induced astigmatism (0.74 ± 0.89 D in group 1 and 0.85 ± 0.76 in group 2, p = 0.651) were comparable between the two groups. An IOL tilt of 5.5 ± 1.8 and 5.8 ± 2.0 degrees (p = 0.867) and an IOL decentration of 0.41 ± 0.21 mm and 0.29 ± 0.11 mm (p = 0.955) were obtained, respectively, in group 1 and group 2 at 24 months. Mean endothelial cell density remained stable at 24 months in both groups (p = 0.832 in group 1 and p = 0.443 in group 2), and it was 1747.20 ± 588.03 cells/mm2 in group 1 and 1883.71 ± 621.29 cells/mm2 in group 2 (p = 0.327) at baseline, 1545.36 ± 442.3 cells/mm2 in group 1 and 1417.44 ± 623.40 cells/mm2 in group 2 (p = 0.483) at 24 months. No cases of endophthalmitis were observed. Conclusions: The scleral pocket technique for sutureless intrascleral one-piece IOL fixation is comparable to the traditional scleral flap technique in terms of long-term visual outcomes and safety. The scleral pocket technique offers a simplified approach and a viable option even for less experienced surgeons.

Minimally invasive techniques utilizing the “Joy Stick” method for managing irreducible flexion-type supracondylar fractures of the humerus in older children

ObjectiveIn this study, we investigated the efficacy of percutaneous poking reduction and Kirschner wire fixation in older children with irreducible supracondylar flexion-type fractures of the humerus.MethodsThis retrospective investigation included 27 children, comprising 15 males and 12 females, aged between 10 years and 3 months to 14 years and 11 months, all diagnosed with a flexion-type supracondylar fracture of the humerus within one week of trauma. All patients underwent surgery under general anesthesia. Following unsuccessful manual reduction, percutaneous poking reduction with Kirschner wires was performed under C-arm fluoroscopy to achieve fracture reduction. Following successful reduction, three 2.0 mm Kirschner wires were inserted in a cross pattern to secure the fracture ends. Postoperatively, the elbow joint was immobilized in a functional position with a plaster cast for four weeks.ResultsFollow-up in the outpatient department ranged from 9 to 36 months. Clinical functional assessment using Flynn’s criteria rated 24 cases as excellent, 2 as good, and 1 as fair, yielding an overall efficacy of 96.3%. No cases of fracture re-displacement, fracture fragment necrosis, or other complications such as nonunion, iatrogenic nerve injury, myositis ossificans, or long-term elbow joint dysfunction were observed during the postoperative follow-up.ConclusionThe percutaneous poking reduction and Kirschner wire fixation technique is a simple and reliable procedure for treating irreducible flexion-type supracondylar fractures of the humerus in older children, with minimal trauma. This technique offers substantial stability for the fracture and results in excellent long-term recovery of joint function.

Reconstruction of patella fractures with the tension band technique: A review on clinical results and tips and tricks

IntroductionThe goals of surgical treatment of patellar fractures are a biomechanically stable joint and congruent restoration of the retro patellar joint surface. Surgical treatment strategies for patellar fractures have evolved from tension band in combination with wire cerclages to new devices. MethodsThe modified anterior tension band (MATB) technique for fixation of patellar fractures consists of two longitudinal 1.8 mm Kirschner wires (K-wires) and an 18-gauge stainless steel wire looped in a figure-of-8 pattern over the anterior aspect of the patella. The K-wires should be inserted 5 mm from the anterior cortical surface of the patella, parallel in the coronal and sagittal planes. For mechanical reasons, the wire should be the closest to the anterior aspect of the bone. This construct converts the anterior tensile forces generated by the extensor mechanism and knee flexion into compressive forces on the anterior aspect of the fracture site. The MATB is the most widely accepted method of internal fixation for transverse and comminuted patellar fractures.Only a careful implementation of the MATB in all its phases will provide the best mechanical construct and the least aggressive construct for the soft tissues, allowing early re-education without complications. ResultsGood to excellent clinical results (64–100 %) have been reported with MATB for fixation of patellar fractures. Good to excellent range of knee motion and satisfactory results have been reported despite a high percentage (up to 60 %) of secondary procedures, mainly for removal of symptomatic hardware. ConclusionThis article provides an overview of the use and results of the MATB technique for patellar fractures and the means to improve results with this technique.

Results of transosseous suture fixation in four-part valgus impacted fractures of the proximal humerus

BackgroundThe osteonecrosis ratio in valgus impacted fractures of the proximal humerus is low (<10 %), giving osteosynthesis all its meaning. However, the optimal fixation technique remains controversial. After recentering the humeral head, osteosuture is stable enough to allow bone healing in an adequate position as well as a good long-term shoulder functionality. MethodsOur cohort included 22 patients with a mean age of 65 (28–83). Patients were placed in a beach-chair position. Surgical exposure was done through an anterolateral, transdeltoid approach. Stay sutures were placed on both tuberosities. Elevation of the humeral head was obtained for 9 patients using iliac crest bone graft, for 7 patients using bone substitutes, for 6 without any graft needed. Both tuberosities were approximated and tied together using two horizontal non-absorbable double-threaded sutures. The whole head was also tied to the humeral metaphysis by cerclage wiring using the same suture. Patients were immobilized in a sling for 4 weeks with no passive or active mobilization; then began rehabilitation starting with passive and active-assisted mobilization. Functional outcome was assessed with the Constant score. Radiographic follow-up was used for fracture healing and osteonecrosis signs. ResultsAll fractures united within the first 3 months. One patient had radiographic signs of osteonecrosis and one had a secondary displaced fracture without osteonecrosis. At an average follow-up of 35 months, the median Constant score was 83.7 % (63–100) in comparison to the uninjured side. DiscussionA preserved posteromedial periosteal hinge in a valgus impacted fracture of the proximal humerus is key to the success of osteosuture. This hinge provides mechanical stability to the humeral head once elevated, as well as blood-supply from the branches of the posterior circumflex humeral artery. Computed Tomography with Three-Dimensional reconstructed images allow for a precise analysis of this hinge as well as the vascularity of the humeral head. Osteosuture being a minimally invasive surgical procedure plays a predominant role in sparing the remaining vascularization of the humeral head. ConclusionOsteosuture in four-part valgus impacted fractures of the proximal humerus is a minimally invasive procedure as well as a reliable technique yielding good long-term results.

Enhanced Degradability of Thiol-Ene Composites through the Inclusion of Isosorbide-Based Polycarbonates.

Open reduction internal fixation metal plates and screws remain the established standard-of-care for complex fracture fixation. They, however, have drawbacks such as limited customization, soft-tissue adhesions, and a lack of degradation. Bone cements and composites are being developed as alternative fixation techniques in order to overcome these issues. One such composite is a strong, stiff, and shapeable hydroxyapatite-containing material consisting of 1,3,5-triazine-2,4,6-trione (TATO) monomers, which cures through high energy visible light-induced thiol-ene coupling (TEC) chemistry. Previous human cadaver and in vivo studies have shown that patches of this composite provide sufficient fixation for healing bone fractures; however, the composite lacks degradability. To promote degradation through hydrolysis, new allyl-functionalized isosorbide-based polycarbonates have been added into the composite formulation, and their impact has been evaluated. Three polycarbonates with allyl functionalities, located at the termini (aPC1 and aPC2) or in the backbone (aPC3), were synthesized. Composites containing 1, 3, and 5 wt % of aPCs 1-3 were formulated and evaluated with regard to mechanical properties, water absorption, hydrolytic degradation, and cytotoxicity. Allyl-functionalized polycaprolactone (aPCL) was synthesized and used as a comparison. When integrated into the composite, aPC3 significantly impacted the material's properties, with the 5 wt % aPC3 formulation showing a significant increase in degradation of 469%, relative to the formulation not containing any aPCs after 8 weeks' immersion in PBS, along with a modest decrease in modulus of 28% to 4.01 (0.3) GPa. Osteosyntheses combining the aPC3 3 and 5 wt % formulations with screws on synthetic bones with ostectomies matched or outperformed the ones made with the previously studied neat composite with regard to bending stiffness and strength in four-point monotonic bending before and after immersion in PBS. The favorable mechanical properties, increased degradation, and nontoxic characteristics of the materials present aPC3 as a promising additive for the TATO composite formulations. This combination resulted in stiff composites with long-term degradation that are suitable for bone fracture repair.