Plate Fixation Research Articles

Ultrasonographic Evaluation of Flexor Pollicis Longus Tendon Location in Various Functional Hand Positions.

Background: Flexor pollicis longus (FPL) tendon injury is a significant complication following distal radius fractures treated with volar locking plate fixation. We were unable to find any studies investigating the FPL tendon in relation to the distal radius in various functional hand positions. The aim of this study is to comprehensively evaluate FPL tendon location in essential functional hand positions commonly encountered in daily life, including pulp pinch, key pinch, chuck grip, power grip, cylindrical grasp and spherical grasp. Methods: We assess the position of the FPL tendon and finger flexor tendons concerning the radius in various functional hand positions. Sixty-two wrists in 31 healthy volunteers were examined using transverse ultrasonography at the watershed area of the radius in six different functional hand positions, including pulp pinch, key pinch, chuck grip, power grip, cylindrical grasp and spherical grasp. Results: The shortest distance between the FPL tendon and radius was observed in the key pinch position with a mean of 3.37mm, while the cylindrical grasp position showed the farthest distance with a mean of 4.21mm. Conclusions: The location of the FPL tendon and finger flexor tendons varies across different functional hand positions. Our study shows that these tendons are closest to the radius when the hand is in the key pinch position. Level of Evidence: Level IV (Diagnostic).

Comparison of clinical efficacy between reconstruction of the superior acromioclavicular ligament with acellular dermal allografts and clavicular hook plate in acromioclavicular dislocations

Purposes: We aimed to compare the clinical efficacy of superior acromioclavicular ligament reconstruction (SALR) using acellular dermal allograft with that of clavicular hook plate fixation (HP) in patients with acromioclavicular (AC) dislocations. We hypothesized that the SALR could provide more stability than hook plate. Methods: Twenty-two cases of acute AC joint dislocation between November 2021 to December 2023 were retrospectively reviewed. All patients were divided into 2 groups based on the treatment with SALR (12 cases) or HP (10 cases). Patients were evaluated radiologically and clinically using coracoclavicular distance and ratio, pain visual analogue scale (PVAS), Single Assessment Numerical Evaluation (SANE), and American Shoulder and Elbow Surgeons (ASES) at postoperative 3 months and 1 year. We evaluated whether patient achieve MCID of PVAS at the last visit, based on the minimal clinically important differences (MCIDs) of PVAS. Results: The SALR group showed a lower rate of reduction loss (8.3 % vs. 40.0 %) and similar clinical outcomes compared to the hook plate group. Initial SANE score was statistically significantly lower in SALR group (SANE: SALR, 45.8 ± 20.7; HP, 68.0 ± 15.5, p = 0.009), but there were no significant differences in final clinical outcomes, including PVAS, ASES, and SANE scores. Conclusion: SALR with acellular dermal allograft demonstrates comparable clinical outcomes to hook plate fixation and may offer a viable alternative, especially in complicated cases. Study Design: Case series; Level of evidence, 4.

Minimally Invasive Plate Osteosynthesis with Mini-Open Technique and Supraclavicular Nerve Preservation Reduces Postoperative Numbness in Acute Displaced Midshaft Clavicle Fracture

Background: Minimally invasive plate osteosynthesis (MIPO) for clavicular shaft fracture yields favorable functional outcomes and results in less surgery-related soft tissue injury than other techniques. Anterior chest and shoulder skin numbness, a common complication after open reduction and plate fixation, is related to injury to the supraclavicular nerves. We propose MIPO combined with a mini-open approach without fluoroscopy for nerve preservation to minimize the risk of postoperative numbness compared with traditional open plating without nerve preservation. Methods: A total of 59 patients were retrospectively identified, with a follow-up period of 6 months. Thirty-two patients underwent MIPO with mini-open and nerve preservation technique (MIPO group), and 27 patients underwent traditional open plating without nerve preservation (open group). Constant–Murley shoulder outcome score, operation time, wound length, skin numbness, and number of implant removals were compared between the groups. Results: The MIPO group had significantly lower rates of anterior chest and shoulder skin numbness than the open group (MIPO: 12.5% vs. open: 55.6%; p < 0.001). Operation time was significantly longer in the MIPO group than in the open group (MIPO: 109.38 ± 18.83 vs. open: 81.48 ± 18.85; p < 0.001). Wound length was significantly shorter in the MIPO group than in the open group (MIPO: 4.73 ± 0.79 vs. open: 9.76 ± 1.64; p < 0.001). Both groups had similarly excellent Constant–Murley shoulder scores. There were significantly fewer implant removals in the MIPO group than in the open group (MIPO: 6.3% vs. open: 25.9%; p = 0.036). Neither group experienced any infection, implant failure, or nonunion. Conclusions: Our technique combining MIPO with the mini-open approach and supraclavicular nerve preservation yields a lower incidence of skin numbness than traditional open plating without nerve preservation.

Arthroscopic Repair of Medial Meniscus Posterior Root Tear with Adjustable Titanium Plate Fixation.

Medial meniscus injury is one of the most prevalent knee disorders, with posterior root tears occurring in approximately 10% to 21% of affected individuals. A posterior root tear disrupts the meniscus's continuous annular structure, compromising its ability to absorb pressure and protect the knee's articular cartilage. If left untreated, this can result in increased stress on the cartilage, leading to conditions such as varus deformity and accelerated joint degeneration. Partial removal (resection) of the medial meniscus further exacerbates these issues, often leading to quicker joint deterioration. Repairing medial meniscus posterior root tears (MMPRTs) plays a crucial role in restoring the meniscus's structural integrity and improving knee biomechanics. Studies have shown that compared to partial medial meniscectomy or conservative treatments, repairing MMPRTs enhances clinical outcomes and significantly delays the onset of arthritis. This article details a surgical procedure that uses a single-suture, double-loop, adjustable titanium plate fixation technique under arthroscopy for effective MMPRT repair.

Risk factors for mortality in periprosthetic femur fractures about the hip-a retrospective analysis.

Fractures around the hip are known to be an indicator for fragility and are associated with high mortality and various complications. A special type of fractures around the hip are periprosthetic femur fractures (PPF) after Total Hip Arthroplasty (THA). The aim of this study was to investigate the mortality rate associated with PPF after THA and to identify risk factors that may increase it. Consecutive patients (N = 158) who were treated for a PPF after THA in our university hospital between 2010 and 2020 were identified and mortality was assessed using the residential registry. Univariate (Kaplan-Meier-Estimator) and multivariate (Cox-Regression) statistical analysis was performed to identify risk factors influencing mortality. One-year-mortality rate was 23.4% and 2-year mortality was 29.2%. Mortality was significantly influenced by age, gender, treatment, type of comorbidity and time of surgery (p < 0.05). Surgical treatment during regular working hours (8 to 18h) reduced mortality by 53.2% compared to surgery on call (OR: 0.468, 95% CI 0.223, 0.986; p = 0.046). For every year of age, mortality risk increased by 12.9% (OR: 1,129, 95% CI 1.078, 1.182; p < 0.001). The type of fracture according to the Vancouver classification had no influence on mortality (p = 0.179). Plate fixation and conservative treatment were associated with a higher mortality compared to revision arthroplasty (plate: OR 2.8, 95% CI 1.318, 5.998; p = 0.007; conservative: OR 2.5, 95% CI 1.421, 4.507; p = 0.002). Surgical treatment during regular working hours is associated with lower mortality compared to surgery outside these hours. In this retrospective cohort, time to surgery showed no significant impact on all-cause mortality, and revision arthroplasty was associated with lower mortality than conservative treatment or plate fixation. IV (Retrospective cohort study).

Complications and morbidity of the extended delto-pectoral approach in treating complex humeral shaft fractures with proximal metaphyseal extension using a long locking plate for internal fixation

Background Humeral shaft fractures account for up to 3% of all fractures, but complex forms of those fractures (type AO/OTA B or higher) are rare. Plate and screw fixation of the fracture are rated as consolidated from 80 to 97%. Reported complications include non-union, secondary radial nerve palsy and infection. Minimally invasive plate osteosynthesis (MIPO) should provide the same union rate as open reduction and internal fixation (ORIF) but potentially with fewer complications. The aim of our study was to review patients treated for complex humeral fractures with ORIF through an extended delto-pectoral approach using a long pre-contoured locking plate. The morbidity of the open approach, complication rates, union rate and clinical outcomes were assessed.Methods We performed a retrospective analysis of 26 consecutive complex humeral shaft fractures (7 males, mean age 59 years; 19 females, mean age 67 years) treated in our institution with a long pre-contoured locking plate between June/2011 and December/2017. Fracture healing was evaluated with standard radiographs. Eventual complications and the morbidity of the approach were assessed through chart review. The final clinical outcome and quality of life were assessed via telephone interview with DASH score and EQ-5D-3 L in 25 of the 26 patients included.Results There were no complications related to the open approach with uneventful wound healing in all cases without any infections. Mechanical complications occurred in 3 cases (11%): one tuberosity dislocation (revised) and two plate failures (one revised). Postoperative radial nerve palsy was observed in two patients (7%), of which one was transient, the other was persistent. The plate was removed in 4 cases (15%). The average radiological and clinical follow-up was 21 months (range: 12–56). At 12 months follow-up complete fracture healing was confirmed in 22 out of 26 cases and in three more patients after 18 months. After an average of 44 months, the mean DASH score was 35 (SD ± 15.83) points; the EQ-5D-3 L score 0.7 (SD ± 0.31).Conclusion ORIF with a long locking plate though an extended delto-pectoral approach is certainly still a viable option to treat complex humeral shaft fractures with good soft tissue and bone healing as well as good functional recovery. No increased morbidity was attributed to the open surgical approach. In our series, radial nerve palsy could not be completely avoided, accentuating the potential risk of this specific fracture in close proximity to the radial nerve.Trial registrationEthics Committee: Ethikkommission Ostschweiz (EKOS), Project ID: 2019-00323.

Comparison of reconstruction plates and miniplates in mandibular defect reconstruction with free iliac flap.

Given the increasing demand for precise and reliable reconstructive techniques in maxillofacial surgery, we try to offer valuable insights for clinicians in selecting optimal fixation methods. Patients were categorized into miniplate and reconstruction plate groups for accuracy and bone healing comparison. We measured gonial angle, intercondylar, intergonial and anterior-posterior distance for general accuracy and distance of segmental endpoint to the sagittal plane for partial accuracy. The bone healing rate of the two groups was compared with CT images at 3, 6 and 12 months after operation. Considering directional indicators, the miniplate group exhibited a wider intercondylar distance than the reconstruction plate group (p = 0.029). At 6 months postoperatively, the miniplate group demonstrated a higher bone healing rate compared to the reconstruction plate group, with no significant differences at other time points. Over a nearly 5-year review, mandibular reconstruction with vascularized iliac bone flaps showed that reconstruction plates better maintained condylar position accuracy, while miniplates had superior bone healing rates at 6 months. No significant differences were found in other accuracy indices between the two plates. Clinicians' selection of fixation plates frequently depends on personal preference rather than evidence-based criteria. This study compares the precision and postoperative osseous healing outcomes of miniplates and reconstruction plates to provide a more scientifically grounded basis for clinical decision-making.

Infectious Complications after Osteosynthesis of Long Bones of the Lower Limbs: Clinical and Nosological Aspects

Summary. The number of complications in the treatment of bone fractures, including infectious ones, remains significant. Therefore, there is a need to carry out all measures aimed at improving the treatment results for this category of patients. Objective. The objective of our study was to determine the frequency and structure of infectious complications in patients after osteosynthesis of the long bones of the lower limbs depending on the location and type of osteosynthesis. Material and Methods. For our study, 140 cases of infectious complications after osteosynthesis of long bones of the lower limbs were analyzed. Results. An integral analysis of the distribution of the retrospective array of studies based on localization in the femur revealed that the infectious process is most often localized in patients with 32B hip fractures. This type of damage was observed in 29.0% of patients of the general array, where it took the first place. Infectious complications after plate osteosynthesis also prevailed, but were detected less often, in 21.2% of cases. Among the patients after blocking intramedullary osteosynthesis, 32B was detected in more than half of the cases, which is 2.5 times more often than among the patients with plate fixation. Similar results were found in patients with damage to the shin. Conclusions. The results of the analysis indicate that in cases of infectious complications after osteosynthesis of the bones of the lower extremities, damage to the diaphyseal part of the hip was detected most often. This indicates that the development of infectious complications was significantly influenced by the patient’s condition and the intervention performed.

Personalised High Tibial Osteotomy Surgery Is Accurate: An Assessment Using 3D Distance Mapping

Early-stage knee osteoarthritis is often suitable for treatment with high tibial osteotomy (HTO). This is an effective joint-preserving treatment, resulting in good postoperative outcomes. To overcome the limitations of traditional HTO, the surgical technique and correction accuracy can be enhanced by personalised procedures using three-dimensional digital planning and metal additive manufacturing, The purpose of this clinical trial study was to evaluate the three-dimensional accuracy of a new personalised HTO procedure, using modern imaging techniques, 3D modelling, and distance map analysis (DMA). Twenty-five patients were treated with the personalised HTO procedure. Before surgery and after 6 months, they underwent clinical evaluation scoring, radiographic imaging, and computed-tomography scanning to generate morphological models. Specifically, preoperative tibia models were used to plan the tibia correction and the design and position of the fixation plate. Preoperative, planned, and postoperative models were imported in computer-aided and designing software (Geomagic ControlTM 2014, 3D Systems, Rock Hill, SC, USA) for DMA implementation to assess geometrical differences between model surfaces. A very good reproduction of the planned tibia morphology was achieved postoperatively (average differences between −0.9 mm and 1.4 mm). DMA values associated with fixation-plate deformation were less than 1 mm, similar to those for plate-to-tibia surface-contour matching. Overall, personalised digitally planned HTO utilising three-dimensional printed surgical guides and plates enables accurate planned correction and plate placement.

Biomechanical Evaluation of Suture Augmentation of Dorsal Locking Plate Fixation in Transverse Patella Fractures.

Adjunctive suture augmentation of patellar plate fixation has yet to be investigated. Our biomechanical study sought to evaluate whether suture augmentation improves dorsal patellar locking plate fixation. Our hypothesis was that suture augmentation would improve fixation of this construct. A transverse patella fracture in six matched cadaveric pairs was stabilized using a patellar locking plate with or without suture augmentation. Specimens were tested at 60° knee flexion with load placed through quadriceps. Cyclic loading followed by load to failure was done. Stiffness, deformation at peak, and nonrecoverable deformation were calculated. During cyclic loading, suture augmentation demonstrated a higher average stiffness throughout all loads. At the final cycle, deformation was markedly higher without suture augmentation. Average load to failure was higher with suture augmentation. Maximum load to failure occurred at 2500 N in both groups. Suture augmentation in a transverse patellar fracture model improved dorsal plate fixation, leading to less fracture displacement at the final load. Although suture augmentation demonstrated higher stiffness and lower deformation, these trends were not statistically significant. In both groups, plate fixation sustained very high loads, which reflects the fixation strength of the dorsal locking plate and screw construct in this fracture model.

Kinematic analysis of engagement and bending capabilities of a point-of-care, incremental skeletal fixation plate bending system

The current standard of care for skeletal reconstruction surgery is to join skeletal disunions with fixation plates and these plates are most commonly fit to bones through manual bending. The bending procedure is often performed in the surgical operating theatre with specialized pliers or, if available, lengthy pre-operative bending to fit a 3D printed skeletal model prepared on computer as part of a virtual surgical plan. Manual bending of fixation plates by eye or to a model can take considerable time. Repetitive bending at a single location can result in work hardening that increases the subsequent risk of fatigue failure. However, incremental forming systems may provide a solution to automatically bend fixation plates accurately, rapidly, and as little at any one location as possible. This paper is an investigation of the kinematics and manipulability of two versions of an incremental fixture plate bending system for Point of Care Manufacturing (POCM) of craniomaxillofacial (CMF) skeletal fixation hardware. The Automatic Plate Bender (APB) v1 is a minimal POCM system that is designed for simple straight plates with a constant incremental pitch. The APB v2 is a more complex POCM that is designed to accommodate a larger variety of standard plates. Kinematic and manipulability analysis demonstrate the engagement and bend classes that each system can accomplish, and identifies a critical singularity in the APB v2 mechanism. The paper concludes with two case studies in which a path planning algorithm uses a manipulability analysis to avoid singularities during incremental bending.

Using calcaneal plates in fixation of comminuted posterior wall acetabular fractures with cranial or posterior extension: a prospective case series and novel technique.

This study aims to evaluate the outcomes of using calcaneal plate in fixation of comminuted posterior wall (PW) acetabular fractures especially that have cranial (dome) or posterior extension (posterior column edge), and to evaluate its safety. To our knowledge, this is the first study that utilizes this off label implant technique in fixation of such fracture. Twenty-two patients enrolled in the study with a minimum follow up of one year. After reducing the PW fragments sequentially, calcaneal plate was applied, fixing its distal part at ischial tuberosity upper ends using 3 screws in a triangular fashion, while its proximal part and radial wings were firmly fixed along the acetabular rim together with the classic longitudinal anchorage. Any fixation failure or head subluxation was recorded. Radiological outcome showed 18 cases scored as excellent, 2 were good, and 2 were poor. The functional outcome revealed 2 patients were excellent, 6 were very good and 14 were good. There was no loss of reduction or fixation failures throughout the follow up period. Calcaneal plate may offer an alternative method of fixation of comminuted PW fractures with acceptable radiological and functional results. Our study result may encourage the comprehensibility and replicability of this practice, however randomized multicentered studies should be conducted to validate this assumption. This method provides valuable trick strategy, stable and soft-tissue-friendly fracture fixation where modern implantations may be unavailable or of high cost. Calcaneal plates show some fascinating features that allow using them outside their field being flexible with large footprint area for fracture buttressing beside numerous hole choices with diverse paths providing suitable fixation, articular stability and wide zone of coverage in PW comminuted fracture patterns with cranial or posterior extensions. The plate proximal triangular configuration together with distal triangular screw fixation gives a stiff rigid anchorage and buttressing similar to a metal mesh covering and fixing any fragment numbers up to dome level.

What Is the Optimal Method of Fixation for Scaphoid Nonunion Relative to the Location of the Lesion?

Scaphoid nonunion is a typical complication of scaphoid fractures, with the nonunion rate varying by the location of the scaphoid. The current widely used method for treating scaphoid nonunion, which is challenging for surgeons, is the headless compression screw (HCS). Various surgical approaches, such as the scaphoid plate, have been proposed to address the problem of screw fixation; however, no consensus exists regarding the optimal treatment method. This study focused on analyzing appropriate treatment methods based on the anatomical location of the scaphoid nonunion. Ninety-seven patients with scaphoid nonunion were treated between 2008 and 2023. All patients underwent treatment using 1 HCS or scaphoid volar locking plate with nonvascularized bone graft from the distal radius depending on the scaphoid's location. The scaphoid angle and bone union were confirmed using radiological examinations. The clinical evaluations included range of motion, pain, grip strength, and functional wrist scores. Fifty-seven patients were included in the final analysis. In the screw group, 26 patients (26/42 [62%]) obtained a bone union, and all 15 patients (15/15 [100%]) in the plate group obtained a union ( P = 0.005). In the waist group, 16 patients with screw (16/25 [64%]) and 8 using a plate (8/8 [100%]) showed bony healing. In the proximal group, 3 patients with HCS (3/9 [33%]) and 4 using plate (4/4 [100%]) showed bone union. In the distal group, 7 patients with a screw (7/8 [87%]) and 3 with the plate (3/3 [100%]) showed bone union. Significant differences were found in the waist ( P = 0.047) and proximal groups ( P = 0.026), but not in the distal group ( P = 0.521). All groups showed improved radiological angles associated with the scaphoid and better clinical outcomes postoperatively. Plate fixation was overall superior to screw fixation for scaphoid nonunion, especially in the waist and proximal poles, providing better union rates and stability. For the distal group, both methods are effective, with the choice depending on the surgeon's expertise and patient factors. The results highlight the importance of the lesion's anatomical location in selecting the appropriate fixation method.

Management of Pediatric Type III Tibial Shaft Fractures: A Cohort Study Utilizing the Trauma Quality Improvement Program Database.

Pediatric open tibial fractures represent a challenging subset of injuries with limited literature to guide management. For children, the epidemiology, management, and outcomes of tibial-shaft fractures have not been fully described. A retrospective analysis of the Trauma Quality Improvement Program Data Bank from 2017-2020 was used to query demographics, injury patterns, and management strategies in pediatric open tibial fractures. Fractures were compared by age group (0-5, 6-12, 13-17 years) and type (I/II vs type III). A subgroup analysis was performed on patients with type III open fractures. A total of 3480 open tibial fractures were identified, 3049 were type I/II, and 431 were type III. Motor vehicle accidents (48%) were the most common mechanism of injury (P < 0.001). Subanalysis of 128 type IIIb/c tibial fractures revealed local flap reconstruction (25%) skin graft (25%), and free tissue transfer were the most common management strategies and soft-tissue coverage was achieved after 162 hours (interquartile range = 109-231). Negative pressure wound therapy was utilized in 63% of cases but used in isolation in only 23% of cases. Immediate fixation with intramedullary nailing was more frequently used in the 13-17 age group while plate fixation was more commonly used in younger age groups. Soft-tissue management patterns following open tibial shaft fractures mirror those seen in adult cohorts. The median time to achieve soft-tissue coverage exceeds the traditional 72-hour target advocated by Godina. Age-based variation is seen in orthopedic management of these fractures based on growth maintenance concerns.

Comparative Analysis of Extended Curettage with Plate Fixation and Extended Curettage with Intramedullary Nail Fixation for Campanacci Grade Ⅱ and International Society of Limb Salvage Zone H2 Giant Cell Tumors of the Proximal Femur: A Retrospective Study

Comparative Analysis of Extended Curettage with Plate Fixation and Extended Curettage with Intramedullary Nail Fixation for Campanacci Grade Ⅱ and International Society of Limb Salvage Zone H2 Giant Cell Tumors of the Proximal Femur: A Retrospective Study

Investigation of treatment outcomes for severe extremity trauma in an independent orthopedic trauma center: A case series

BackgroundSevere extremity trauma is one of the most challenging injuries to treat. Limb salvage after severe extremity trauma requires rapid revascularization, accurate and appropriate bone and soft tissue reconstruction, and appropriate management to address critical complications. The purpose of this study was to report the treatment outcomes for severe extremity trauma injuries at our independent orthopedic trauma center. MethodsThis study included patients with severe extremity trauma who underwent major vascular repair or soft tissue reconstruction. Bone reconstruction method, presence or absence of revascularization, and flap type were investigated. Complications were investigated, including revascularization failure, flap failure, infection, and ultimately, whether amputation was required. Additionally, we investigated the number of surgeries performed on each patient at the time of initial hospitalization. ResultsThirty-five patients who underwent revascularization or soft tissue reconstruction were included in this study. Plate fixation was performed in 18 patients, intramedullary nail fixation in 8, screw fixation in 1, pinning in 4, and without implant fixation in 4. Revascularization was performed in six patients, and no vascular complications occurred. Pedicled and free flaps were used in 17 and 16 patients, respectively. Partial flap necrosis occurred in four patients, and arterial occlusion occurred in one. Infection occurred in 10 patients who were treated with frequent irrigation and high-concentration antibiotics local infusion therapy. None of the 35 patients required limb amputation. Mean number of surgeries was 12.5. ConclusionsThe limb of all the 35 patients with severe extremity trauma treated at our independent orthopedic trauma center were salvaged.

Fixing Cho Type IIC Distal Clavicle Fractures with Hook Plates Leads to a High Incidence of Subacromial Osteolysis: A Retrospective Study and Literature Review.

This retrospective study investigates the complications, particularly subacromial osteolysis (SAO), associated with hook plate (HP) fixation, in the treatment of unstable distal clavicle fractures characterized by complete coracoclavicular (CC) ligament rupture. The decision-making process for employing HP in fractures of this nature, such as Neer types IIB and V and Cho classification IIC, involves considerations of distal fragment size and displacement. While HP offers advantages in clinical practice, it is not without complications, with SAO being a notable concern. Factors such as non-anatomic hook tip placement and fracture classification may influence the risk of SAO. The study comprises a retrospective analysis of unstable distal clavicle fractures treated with HP at our institution from 2019 to 2022. Exclusions include non-displaced fractures, those treated with other locking plates, and pathologic fractures. A total of 91 patients with displaced distal clavicle fractures underwent open reduction and internal fixation with HP. Cho classification was employed to differentiate cases with CC ligament rupture. Patient demographics, classifications, postoperative radiographs, distal fragment size, plate position, timing of implant removal, and complications, including SAO, were recorded. Among the 91 patients, 32 were classified as Cho IIB, 43 as Cho IIC, and 16 as Cho IID. Ninety-one percent exhibited solid union before implant removal. The prevalence of SAO was 43.8%, 76.7%, and 62.5% in Cho IIB, IIC, and IID, respectively. Univariate analysis revealed a significant difference only in Cho classification (p = 0.014). Binary logistic regression identified Cho classification type IIC as the sole risk factor for SAO (p = 0.021; odds ratio, 4.48; 95% confidence interval, 1.56-12.87). Cho type IIC fractures, characterized by CC ligament deficiency causing horizontal instability, demonstrated the highest SAO rate. In contrast, Neer type IIB fractures retained the trapezoid ligament, and Neer type V fractures had intact CC ligaments, resulting in lower SAO rates. Biomechanically, combining HPs with CC ligament reconstruction provided better structural stability than using HPs alone in treating Cho type IIC fractures.

A Novel Approach for Improving Midface Aesthetics: A Pilot Study.

Asian individuals often seek solutions to address midface depression and enhance nasal alar base morphology to achieve Western facial aesthetics. Current treatment options, including injections and invasive procedures, have limited efficacy and safety. To address these challenges, we introduced the "modified A-10 surgery," which integrates the Point A-Koji method, titanium plates, and artificial dermis insertion. The efficacy of the modified A-10 surgery was illustrated using a case study of a 22-year-old woman. Surgical planning was based on dental cone-beam computed tomography data, with lateral cephalometric radiographs used to determine the titanium plate dimensions. The surgery involved customized plate alignment, fixation, and artificial dermis insertion. The modified A-10 surgery substantially improved facial aesthetics and structural parameters. Facial convexity increased from 15.5 degrees to 23.2 degrees, enhancing the 3-dimensionality. The nasolabial angle shifted from 91.9 degrees to 110.2 degrees, achieving the desired mouth projection. Other measurements, such as the E-line to the lower lip and the distance from point A to the subnasal point, contributed to refined aesthetics. The nasal alar base thickness increased by 2.2 mm (19.5%), correcting the depression. The modified A-10 surgery represents a minimally invasive and comprehensive solution for midface depression and nasal alar base enhancement. By combining the Point A-Koji method, titanium plates, and artificial dermis insertion, this surgery successfully achieved improved facial aesthetics and contours. The results validate its potential as a long-term solution, with implications for antiaging interventions and promising avenues for future research.

Medial Tibial Condylar Valgus Osteotomy improve clinical outcomes and effectively corrects significant Tibial varus deformities without compromising joint line obliquity or patellar heigh

BackgroundTibial condylar valgus osteotomy (TCVO), or Chiba osteotomy, is a recognized procedure for treating advanced knee osteoarthritis in middle-aged individuals. Although its effectiveness is established, limited literature exists on its outcomes for specific conditions such as post-traumatic deformities, Blount disease (BD), and Pagoda-like proximal tibia varus deformities. HypothesisWe hypothesized that TCVO could improve both clinical and radiographic outcomes in patients with severe varus deformities, correcting lower-limb variances while preserving joint line obliquity (JLO) and patellar height in substantial varus deformities. Patients and methodsThis study included 33 patients who underwent TCVO, with etiologies including post-traumatic (26 patients, 78.8%), Blount disease (4 patients, 12.1%), and Pagoda deformities (3 patients, 9.1%). The average age was 32.5 years (standard deviation = 12.8 years). Techniques for deformity correction varied, including Patient Specific Instrumentation (PSI) for 10 patients (30.3%) and locking plate fixation for 13 patients (39.4%). We assessed several radiological parameters such as hip-knee-ankle angle (HKA), medial proximal tibial angle (MPTA), joint line convergence angle (JLCA), Caton-Deschamps index (CDI), and proximal posterior tibial angle (PPTA). Patient-reported outcomes, including the Knee injury and Osteoarthritis Outcome Score (KOOS) and simple knee value (SKV), were recorded both pre-operatively and two years post-operatively. ResultsStatistically significant improvements were observed in clinical scores and alignment changes two years post-operatively, including increases in HKA (from 166.1 to 178.4, p < .0001) and MPTA (from 72.4 to 85.1, p < .0001), and a decrease in JLO (from 9.8 to 3.2, p < .0001). No significant changes were noted in JLCA, PPTA, and CDI, with the patellar height remaining stable post-operatively. The achieved corrections closely matched the pre-operative plans. ConclusionTCVO offers significant improvements in radiological and clinical parameters for patients with substantial tibial varus deformities, effectively maintaining JLO and patellar height. Optimal outcomes from TCVO are dependent on careful patient selection and precise execution of surgical techniques. Level of evidenceIII.

Trauma

The October 2024 Trauma Roundup360 looks at: Early versus delayed weightbearing following operatively treated ankle fracture (WAX): a non-inferiority, multicentre, randomized controlled trial; The effect of early weightbearing and later weightbearing rehabilitation interventions on outcomes after ankle fracture surgery; Is intramedullary nailing of femoral diaphyseal fractures in the lateral decubitus position as safe and effective as on a traction table?; Periprosthetic fractures of the hip: Back to the Future, Groundhog Day, and horses for courses; Two big bones, one big decision: when to fix bilateral femur fractures; Comparison of ankle fracture fixation using intramedullary fibular nailing versus plate fixation; Unclassified acetabular fractures: do they really exist?