First Row Transition Metal Complexes Research Articles

Copper(II)-Catalyzed Asymmetric Photoredox Reactions: Enantioselective Alkylation of Imines Driven by Visible Light

Asymmetric photoredox catalysis offers exciting opportunities to develop new synthetic approaches to chiral molecules through novel reaction pathways. Employing the first-row transition metal complexes as the chiral photoredox catalysts remains, however, a formidable challenge, although these complexes are economic, environmentally friendly, and often exhibit special reactivities. We report in this Article the development of one class of highly efficient asymmetric/photoredox bifunctional catalysts based on the copper(II) bisoxazoline complexes (CuII-BOX) for the light-induced enantioselective alkylation of imines. The reactions proceed under very mild conditions and without a need for any other photosensitizer. The simple catalytic system and readily tunable chiral ligands enable a significantly high level of enantioselectivity for the formation of chiral amine products bearing a tetrasubstituted carbon stereocenter (36 examples, up to 98% ee). Overall, the CuII-BOX catalysts initiate the radical generation, and also govern the subsequent stereoselective transformations. This strategy utilizing chiral complexes comprised of a first-row transition metal and a flexible chiral ligand as the asymmetric photoredox catalysts provides an effective platform for the development of green asymmetric synthetic methods.

A Series of Octahedral First-Row Transition-Metal Ion Complexes Templated by Wells-Dawson Polyoxometalates: Synthesis, Crystal Structure, Spectroscopic, and Thermal Characterizations, and Electrochemical Properties.

Three Wells-Dawson polyoxotungstates-based hybrid compounds of general formula [M(C3H7NO)6][{M(C3H7NO)5}2(μ-P2W18O62)]· nC3H7NO· n'H2O [with M = MnII (1), FeII (2), CoII (3) ; n = 2, 2, 3 and n' = 0, 0, 1, respectively] were synthesized at room temperature by a facile method and characterized by IR and 1H and 31P NMR spectroscopy studies, thermogravimetric analysis-differential scanning calorimetry thermal analyses, UV-vis, X-ray diffraction (XRD) powder and single-crystal XRD analyses, and cyclic voltammetry studies. From the X-ray study, it was established that the metal (M = Mn, Fe, Co) is located on an inversion center, being octahedrally coordinated to six dimethylformamide (DMF) molecules to form the complex cation [M(dmf)6]2+. Also, in the dinuclear complex anion [{M(dmf)5}2(μ-P2W18O62)]2-, the M atoms are coordinated to five DMF molecules through the oxygen atoms, while the sixth coordination site is occupied by a terminal oxygen atom of the Wells-Dawson anion [P2W18O62]6- that plays the role of a bridging ligand. The crystal components are connected through numerous weak C-H···O hydrogen bonds to construct a three-dimensional network. The UV-vis shows the two characteristic absorption bands for the three compounds at 266-268 and 297 nm. These two strong bands are attributed to the charge-transfer absorption band of Ot-W and Ob/c-W, respectively. Cyclic voltammetry study of compounds (1), (2), and (3) reveals at least two reduction reversible peaks ascribed to a Wells-Dawson cluster.

Improved charge transfer multiplet method to simulate M- and L-edge X-ray absorption spectra of metal-centered excited states.

Charge transfer multiplet (CTM) theory is a computationally undemanding and highly mature method for simulating the soft X-ray spectra of first-row transition metal complexes. However, CTM theory has seldom been applied to the simulation of excited-state spectra. In this article, the CTM4XAS software package is extended to simulate M2,3- and L2,3-edge spectra for the excited states of first-row transition metals and also interpret CTM eigenfunctions in terms of Russell-Saunders term symbols. These new programs are used to reinterpret the recently reported excited-state M2,3-edge difference spectra of photogenerated ferrocenium cations and to propose alternative assignments for the electronic state of these cations responsible for the spectroscopic features. These new programs were also used to model the L2,3-edge spectra of FeII compounds during nuclear relaxation following photoinduced spin crossover and to propose spectroscopic signatures for their vibrationally hot states.

Challenges in Multireference Perturbation Theory for the Calculations of the g-Tensor of First-Row Transition-Metal Complexes.

In this article, we have studied 34 S = 1/2 complexes of first-row transition-metal complexes in d1, d5, d7, and d9 configurations in an attempt to determine the intrinsic accuracy of the scalar-relativistic complete active space self-consistent field (CASSCF) and N-electron valence perturbation theory (NEVPT2) methods, with respect to predicting molecular g-values. CASSCF calculations based on active spaces that contain only metal-based orbitals largely overestimate the g-values, compared to experiment and often fail to provide chemically meaningful results. Incorporation of dynamic correlation by means of the NEVPT2 method significantly improves the transition energies, with a typical error, relative to the experiment, of 2000-3000 cm-1. As a result, a lowering in the g-shift by almost an order of magnitude is obtained, relative to the CASSCF results. However, the g-shifts are still overestimated, compared to the experiment, since CASSCF leads to an overly ionic description of the metal-ligand bond and, hence, to spin-orbit coupling matrix elements that are too large. Inclusion of the double d-shell, along with appropriate bonding counterparts to the antibonding d-orbitals in the active space, led to the correct trends in the g-values for all studied complexes, with the linear regression coefficient ( R) equal to 0.93 over the entire dataset. Various technical aspects of the calculations such as the influence of relativity, importance of picture change effects, solvation effects, and comparison between second-order perturbation and effective Hamiltonian-based theories have also been systematically studied. In addition, g-tensor calculations were performed with five popular density functional theory (DFT) methods (B3LYP, M06L, M06, TPSSh, and PBE0) to compare with wave function (WF) methods. Our results suggest that WF-based methods are remarkably better than DFT methods. However, despite the fact that WF theory has come a long way in computing the properties of large, open-shell transition-metal complexes, methodological work is still necessary for truly high accuracies to be reached.

Magnesium(II) Complexes with High Emission: The Distinct Charge-Transfer Process from Transition Metal

Generally, the first-row transition-metal complexes are notorious in luminescence materials because of their metal-ligand charge transfer in emission process. Herein, we rationally used magnesium instead the first-row transition metal to coordinate with 2-(anthracen-9-yl)-1H-imidazo[4,5-f][1,10]phenanthroline (AIP) in the construction of luminescent complexes. Further investigation revealed AIP could work as detector for quantitative determination of Mg2+ cation. Comparing to other divalent cations, this fluorescence sensor exhibited high selectivity for the quantitative determination of Mg2+ with the low limit of detection (5 × 10–7 m). Through X-ray single crystal diffraction, the crystal structures of [Mg(AIP2)(NO3)2·(H2O)4] (1), [Mn(AIP)(NO3)·EtOH] (2), and [Co2(AIP)2Cl4·(MeOH)2] (3) were observed in various arrangements. The theory calculations based on crystal structures indicated the MgII complex undergoes distinct charge-transfer process from other transition-metals based compounds, in which charge-transfer excited-state lifetimes were deactivated rapidly through metal-to-ligand charge-transfer (MLCT) process. This study provided insight into construction of luminescence compounds by using d0 metals in main groups instead of transition metals.

Fluoroalkyl phthalocyanines: Bioinspired catalytic materials

The design of self oxidation-resistant catalytic materials based on organic molecules, although advantageous due to the ability to control their structures, is limited by the presence of labile C–H bonds. This mini review summarizes recent work aimed at first-row transition metal complexes of a new class of coordinating ligands, fluoroalkyl-substituted fluorophthalocyanines, R[Formula: see text]Pcs, ligands in which all, or the majority of their C–H bonds are replaced by a combination of fluoro- and perfluoroalkyl groups yielding porphyrin-bioinspired catalyst models. In the case of homogeneous systems, cobalt(II) complexes catalyze the aerobic oxidation of thiols to disulfides, a reaction of both biological significance and industrial importance. Zinc(II) complexes photo-generate excited state singlet oxygen, [Formula: see text]O[Formula: see text], resulting in both the incorporation of O[Formula: see text] in C–H bonds or, depending on the reaction parameters, oxidation of dyes, model pollutants. Catalyst heterogenization using oxidic and other supports yields stable, active hybrid materials. Functionalized R[Formula: see text]Pcs with acidic (–COOH) or basic (–NH[Formula: see text]R[Formula: see text], [Formula: see text] 2) groups exhibit scaffolds that afford both conjugation with biological vectors for theranostic applications as well as solid-supported materials with superior stability. Electrodes modified with hybrid R[Formula: see text]Pc-containing supports have also been used in photo-oxidations, replacing enzymes and H[Formula: see text]O[Formula: see text] associated reagents with a combination of light and air. An analytical device employed for the nano-level detection of environmentally deleterious antibiotics has been constructed.

Toward Highly Accurate Spin State Energetics in First-Row Transition Metal Complexes: A Combined CASPT2/CC Approach

In previous work on the performance of multiconfigurational second-order perturbation theory (CASPT2) in describing spin state energetics in first-row transition metal systems [ Pierloot et al. J. Chem. Theory Comput. 2017 , 13 , 537 - 553 ], we showed that standard CASPT2 works well for valence correlation but does not describe the metal semicore (3s3p) correlation effects accurately. This failure is partially responsible for the well-known bias toward high-spin states of CASPT2. In this paper, we expand our previous work and show that this bias could be partly removed with a combined CASPT2/CC approach: using high-quality CASPT2 with extensive correlation-consistent basis sets for valence correlation and low-cost CCSD(T) calculations with minimal basis sets for the metal semicore (3s3p) correlation effects. We demonstrate that this approach is efficient by studying the spin state energetics of a series of iron complexes modeling important intermediates in oxidative catalytic processes in chemistry and biochemistry. On the basis of a comparison with bare CCSD(T) results from this and previous work, the average error of the CASPT2/CC approach is estimated at around 2 kcal mol-1 in favor of high spin states.

Ligand Effects on the Reactivity of [CoX]+ (X = CN, F, Cl, Br, O, OH) Towards CO2: Gas-Phase Generation of the Elusive Cyanoformate by [Co(CN)]+ and [Fe(CN)

The thermal reactions of [CoX]+ (X = CN, F, Cl, Br, O, OH) with carbon dioxide have been investigated experimentally and theoretically by using electrospray ionization mass spectrometry (ESI-MS) and density functional theory. Surprisingly, in contrast to the complete inertness of [CoX]+ (X = F, Cl, Br, O, OH) toward carbon dioxide, [Co(CN)]+ activates carbon dioxide to form the elusive [NCCO2Co]+ ion in the gas phase. Mechanistic investigation into this ligand-controlled CO2 activation via C_C bond formation, mediated by a first-row late transition-metal complex, reveals that the inertness of [CoX]+ (X = F, Cl, Br, O, OH) is due to kinetic barriers located above the entrance asymptote. The exception is the [Co(CN)]+/CO2 couple, for which the thermal C–C bond formation is both thermochemically and kinetically accessible. Interestingly, a cyanoformate ligand is most likely also formed in the reaction of [Fe(CN)]+ with CO2; cyanoformate formation had been suggested earlier as a protective mechanism to prevent cyanide complexation to the iron-containing active site of the enzyme ACC oxidase (Murphy et al., in Science 344:75–78, 2014).

Mononuclear complexes of a tridentate redox-active ligand with sulfonamido groups: structure, properties, and reactivity.

The design of molecular complexes of earth-abundant first-row transition metals that can catalyze multi-electron C-H bond activation processes is of interest for achieving efficient, low-cost syntheses of target molecules. To overcome the propensity of these metals to perform single-electron processes, redox-active ligands have been utilized to provide additional electron equivalents. Herein, we report the synthesis of a novel redox active ligand, [ibaps]3-, which binds to transition metals such as FeII and CoII in a meridional fashion through the three anionic nitrogen atoms and provides additional coordination sites for other ligands. In this study, the neutral bidentate ligand 2,2'-bipyridine (bpy) was used to complete the coordination spheres of the metal ions and form NEt4[MII(ibaps)bpy] (M = Fe (1) or Co (1-Co)) salts. The FeII salt exhibited rich electrochemical properties and could be chemically oxidized by 1 and 2 equiv. of ferrocenium to form singly and doubly oxidized species, respectively. The reactivity of 1 towards intramolecular C-H bond amination of aryl azides at benzylic and aliphatic carbon centers was explored, and moderate to good yields of the resulting indoline products were obtained.

First row metal complexes of the hindered tridentate ligand 2,6-bis-(3′,5′-diphenylpyrazolyl)pyridine

Abstract Crystal structures of five first-row transition metal complexes of a recently-available bis-pyrazolylpyridine (bpp) ligand, 2,6-bis(3′,5′-diphenylpyrazolyl)pyridine (bdppp), prepared by reaction with transition metal chlorides, are reported. The ligand forms two types of structures, a 2:1 complex with Fe (II) chloride, and 1:1 complexes with Mn(II), Ni(II), Co(II), and Zn(II), chlorides, resulting in two different geometries. In all cases the ligand is tridentate, but in contrast to reported bpp structures, the plane of the pyridine ring coordinating with the metal is significantly distorted from the plane of the pyrazoles and metal.

Crystal structure and spectroscopic characterization of a cobalt(II) tetraazamacrocycle: completing a series of first-row transition-metal complexes.

The tetraazamacrocyclic ligand 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane (TMC) has been used to bind a variety of first-row transition metals but to date the crystal structure of the cobalt(II) complex has been missing from this series. The missing cobalt complex chlorido(1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane-κ4N)cobalt(II) chloride dihydrate, [CoCl(C14H32N4)]Cl·2H2O or [CoIICl(TMC)]Cl·2H2O, crystallizes as a purple crystal. This species adopts a distorted square-pyramidal geometry in which the TMC ligand assumes the trans-I configuration and the chloride ion binds in the syn-methyl pocket of the ligand. The CoII ion adopts an S = 3/2 spin state, as measured by the Evans NMR method, and UV-visible spectroscopic studies indicate that the title hydrated salt is stable in solution. Density functional theory (DFT) studies reveal that the geometric parameters of [CoIICl(TMC)]Cl·2H2O are sensitive to the cobalt spin state and correctly predict a change in spin state upon a minor perturbation to the ligand environment.

Multielectron Transfer at Cobalt: Influence of the Phenylazopyridine Ligand

The dicationic complex [CpCo(azpy)(CH3CN)](ClO4)2 1 (azpy = phenylazopyridine) exhibits a reversible two-electron reduction at a very mild potential (-0.16 V versus Fc0/+) in acetonitrile. This behavior is not observed with the analogous bipyridine and pyrazolylpyridine complexes (3 and 4), which display an electrochemical signature typical of CoIII systems: two sequential one-electron reductions to CoII at -0.4 V and CoI at -1.0 to -1.3 V versus Fc0/+. The doubly reduced, neutral complex [CpCo(azpy)] 2 is isolated as an air-stable, diamagnetic solid via chemical reduction with cobaltocene. Crystallographic and spectroscopic characterization together with experimentally calibrated density functional theory calculations illuminate the key structural and electronic changes that occur upon reduction of 1 to 2. The electrochemical potential inversion observed with 1 is attributed to effective overlap between the metal d and the low-energy azo π* orbitals in the intermediary redox state and additional stabilization of 2 from structural reorganization, leading to a two-electron reduction. This result serves as a key milestone in the quest for two-electron transformations with mononuclear first-row transition metal complexes at mild potentials.

A Pyridine Alkoxide Chelate Ligand That Promotes Both Unusually High Oxidation States and Water-Oxidation Catalysis.

Water-oxidation catalysis is a critical bottleneck in the direct generation of solar fuels by artificial photosynthesis. Catalytic oxidation of difficult substrates such as water requires harsh conditions, so the ligand must be designed both to stabilize high oxidation states of the metal center and to strenuously resist ligand degradation. Typical ligand choices either lack sufficient electron donor power or fail to stand up to the oxidizing conditions. Our research on Ir-based water-oxidation catalysts (WOCs) has led us to identify a ligand, 2-(2'-pyridyl)-2-propanoate or "pyalk", that fulfills these requirements. Work with a family of Cp*Ir(chelate)Cl complexes had indicated that the pyalk-containing precursor gave the most robust WOC, which was still molecular in nature but lost the Cp* fragment by oxidative degradation. In trying to characterize the resulting active "blue solution" WOC, we were able to identify a diiridium(IV)-mono-μ-oxo core but were stymied by the extensive geometrical isomerism and coordinative variability. By moving to a family of monomeric complexes [IrIII/IV(pyalk)3] and [IrIII/IV(pyalk)2Cl2], we were able to better understand the original WOC and identify the special properties of the ligand. In this Account, we cover some results using the pyalk ligand and indicate the main features that make it particularly suitable as a ligand for oxidation catalysis. The alkoxide group of pyalk allows for proton-coupled electron transfer (PCET) and its strong σ- and π-donor power strongly favors attainment of exceptionally high oxidation states. The aromatic pyridine ring with its methyl-protected benzylic position provides strong binding and degradation resistance during catalytic turnover. Furthermore, the ligand has two additional benefits: broad solubility in aqueous and nonaqueous solvents and an anisotropic ligand field that enhances the geometry-dependent redox properties of its complexes. After discussion of the general properties, we highlight the specific complexes studied in more detail. In the iridium work, the isolated mononuclear complexes showed easily accessible Ir(III/IV) redox couples, in some cases with the Ir(IV) state being indefinitely stable in water. We were able to rationalize the unusual geometry-dependent redox properties of the various isomers on the basis of ligand-field effects. Even more striking was the isolation and full characterization of a stable Rh(IV) state, for which prior examples were very reactive and poorly characterized. Importantly, we were able to convert monomeric Ir complexes to [Cl(pyalk)2IrIV-O-IrIVCl(pyalk)2] derivatives that help model the "blue solution" properties and provide groundwork for rational synthesis of active, well-defined WOCs. More recent work has moved toward the study of first-row transition metal complexes. Manganese-based studies have highlighted the importance of the chelate effect for labile metals, leading to the synthesis of pincer-type pyalk derivatives. Beyond water oxidation, we believe the pyalk ligand and its derivatives will also prove useful in other oxidative transformations.

Spin State Energetics in First-Row Transition Metal Complexes: Contribution of (3s3p) Correlation and Its Description by Second-Order Perturbation Theory.

This paper presents an in-depth study of the performance of multiconfigurational second-order perturbation theory (CASPT2, NEVPT2) in describing spin state energetics in first-row transition metal (TM) systems, including bare TM ions, TM ions in a field of point charges (TM/PC), and an extensive series of TM complexes, where the main focus lies on the (3s3p) correlation contribution to the relative energies of different spin states. To the best of our knowledge, this is the first systematic NEVPT2 investigation of TM spin state energetics. CASPT2 has been employed in several previous studies but was regularly found to be biased toward high spin states. The bias was attributed to a too low value of the so-called IPEA shift ϵ, an empirical correction in the CASPT2 zeroth-order Hamiltonian with a standard value of 0.25 hartree. Based on comparisons with experiment (TM ions) and calculations with the multireference configuration interaction (TM ions and TM/PC systems) and coupled-cluster (TM complexes) methods, we demonstrate in this work that standard CASPT2 works well for valence correlation and that its bias toward high-spin states is caused by an erratic description of (3s3p) correlation effects. The latter problem only occurs for spin transitions involving a ligand field (de)excitation, not in bare TM ions. At the same time the (3s3p) correlation contribution also becomes strongly ϵ dependent. The error can be reduced by increasing ϵ but only at the expense of deteriorating the CASPT2 description of valence correlation in the TM complexes. The alternative NEVPT2 method works well for bare TM and TM/PC systems, but its results for the TM complexes are disappointing, with large errors both for the valence and (3s3p) correlation contributions to the relative energies of different spin states.

Cobalt, nickel, and iron complexes of 8-hydroxyquinoline-di(2-picolyl)amine for light-driven hydrogen evolution.

Novel cobalt, nickel, and iron complexes based on the pentadentate 8-hydroxyquinoline-di(2-picolyl)amine ligand were synthesized and thoroughly characterized. X-ray structures of both the cobalt and iron complexes were also obtained, showing the tendency to adopt a pseudo-octahedral geometry by coordination of an additional sixth ligand. These metal complexes were then studied as potential hydrogen-evolving catalysts (HECs) under both electrochemical and light-driven conditions. In particular, two different photochemical systems were tested involving either Ru(bpy)32+/ascorbic acid or Ir(ppy)2(bpy)+/TEA sensitizer/sacrificial donor couples. The electrochemical results showed that these metal complexes may behave as competent HECs. However, under photochemical conditions, only the cobalt compound displayed substantial hydrogen-evolving activity in both ruthenium- and iridium-based systems. The nickel and iron complexes, on the other hand, exhibited appreciable photocatalytic activity only in the iridium-based photochemical system, while showing negligible hydrogen evolution ability when employed in the ruthenium-based one.

Cobaloxime-catalyzed hydration of terminal alkynes without acidic promoters.

Cobaloxime (Co(dmgBF2)2·2H2O), an inexpensive first-row transition-metal complex, catalyzed hydration of terminal alkynes gave the corresponding methyl ketones in good to excellent yields under neutral conditions (additional protic acids and silver salts are not required). A wide range of functional groups, such as allyl ether, benzyl ethers, carboxylic esters, imides, amides, nitro, and halogens, were tolerated. The mild reaction conditions together with the inexpensive feature and easy availability of the catalyst well address the current challenges in the field of alkyne hydration.

Synthesis and characterization of two polydentate pyridylamines, their acidified salts and late first-row transition metal complexes

Synthesis and characterization of a new tripodal polydentate pyridylamine CL and an improved synthesis of analogue NL were developed. Acidified salts of the two polyamines (CLH and NLH), one trizinc (1), and two monometallic complexes (2 and 3) were synthesized and structurally characterized. Protonation of the polyamines occurred at the pyridine N atoms, strongly supported by the hydrogen bonds between the cations and anions in the extended network. Structural analysis of the three complexes supported by NL demonstrated its versatile coordination modes.

Thermochemistry and Geometries for Transition-Metal Chemistry from the Random Phase Approximation.

Performance of the random phase approximation (RPA) is tested for thermochemistry and geometries of transition-metal chemistry using various benchmarks obtained either computationally or experimentally. Comparison is made to popular (semi)local meta- and hybrid density functionals as well as to the second-order Møller-Plesset perturbation theory (MP2) and its spin-component-scaled derivatives. The benchmark sets include reaction energies, barrier heights, and dissociation energies of prototype bond-activation reactions, dissociation energies for a set of large transition-metal complexes, bond lengths and dissociation energies of metal hydride ions, and bond lengths and angles of a set of closed-shell first-row transition-metal complexes. The emphasis is on first-row transition-metal chemistry, though for energies, elements beyond the first-row are included. Attention is paid to the basis set convergence of RPA. For thermochemistry, RPA performs on par or better than the density functional theory (DFT) functionals presented and is significantly more accurate than MP2. The largest errors are observed in dissociation energies where the electronic environment is altered substantially. For structural parameters, very good results were obtained, and RPA meets the high quality of structures from DFT. In most cases, well-converged structures are obtained with basis sets of triple-zeta quality. MP2 optimized values can often not be obtained and are on average of inferior quality. Though chemical accuracy is not reached, the RPA method is a step forward toward a systematic, parameter-free, all-round method to describe transition-metal chemistry.

Activation of Dioxygen by Iron and Manganese Complexes: A Heme and Nonheme Perspective.

The rational design of well-defined, first-row transition metal complexes that can activate dioxygen has been a challenging goal for the synthetic inorganic chemist. The activation of O2 is important in part because of its central role in the functioning of metalloenzymes, which utilize O2 to perform a number of challenging reactions including the highly selective oxidation of various substrates. There is also great interest in utilizing O2, an abundant and environmentally benign oxidant, in synthetic catalytic oxidation systems. This Perspective brings together recent examples of biomimetic Fe and Mn complexes that can activate O2 in heme or nonheme-type ligand environments. The use of oxidants such as hypervalent iodine (e.g., ArIO), peracids (e.g., m-CPBA), peroxides (e.g., H2O2) or even superoxide is a popular choice for accessing well-characterized metal-superoxo, metal-peroxo, or metal-oxo species, but the instances of biomimetic Fe/Mn complexes that react with dioxygen to yield such observable metal-oxygen species are surprisingly few. This Perspective focuses on mononuclear Fe and Mn complexes that exhibit reactivity with O2 and lead to spectroscopically observable metal-oxygen species, and/or oxidize biologically relevant substrates. Analysis of these examples reveals that solvent, spin state, redox potential, external co-reductants, and ligand architecture can all play important roles in the O2 activation process.

Shrinking the Synchrotron: Tabletop Extreme Ultraviolet Absorption of Transition-Metal Complexes.

We show that the electronic structure of molecular first-row transition-metal complexes can be reliably measured using tabletop high-harmonic XANES at the metal M2,3 edge. Extreme ultraviolet photons in the 50-70 eV energy range probe 3p → 3d transitions, with the same selection rules as soft X-ray L2,3-edge absorption (2p → 3d excitation). Absorption spectra of model complexes are sensitive to the electronic structure of the metal center, and ligand field multiplet simulations match the shapes and peak-to-peak spacings of the experimental spectra. This work establishes high-harmonic spectroscopy as a powerful tool for studying the electronic structure of molecular inorganic, bioinorganic, and organometallic compounds.