First-principles Calculations Research Articles

High-Performance Sub-10 nm Two-Dimensional SbSeBr Transistors through Transport Orientation.

Exploring two-dimensional (2D) materials with a small carrier effective mass and suitable band gap is crucial for the design of metal oxide semiconductor field effect transistors (MOSFETs). Here, the quantum transport properties of stable 2D SbSeBr are simulated on the basis of first-principles calculations. Monolayer SbSeBr proves to be a competitive channel material, offering a suitable band gap of 1.18 eV and a small electron effective mass (me*) of 0.22m0. The 2D SbSeBr field effect transistor (FET) with 8 nm channel length exhibits a high on-state current of 1869 μA/μm, low power consumption of 0.080 fJ/μm, and small delay time of 0.062 ps, which can satisfy the requirements of the International Technology Roadmap for Semiconductors for high-performance devices. Moreover, despite the monolayer SbSeBr having an isotropic me*, the asymmetrical band trends enable SbSeBr FETs to display transport orientation, which emphasizes the importance of band trends and provides valuable insights for selecting channel materials.

First-principles thermodynamic investigation on the α phases in TiO and TiNb binary system.

O and Nb are two representative alloying elements of Ti to form high-temperature and corrosion resistance α Ti alloys. The investigation on the thermodynamic characteristics of α Ti-O and Ti-Nb has attracted much attention in recent years. However, in this regard, a satisfied experimental technique or modeling scheme is still yet to be developed due to the appearance of a variety of oxides in Ti-O and the mechanical instability present in Ti-Nb. Herein, we combined first-principles calculations with the cluster expansion method to investigate the ground-state characteristics for α Ti-O and α Ti-Nb systems. The atomic bonding interactions in these two systems were first revealed based on the calculated electronic structures. Afterward, the Debye-Grüneisen model and Monte Carlo simulations were employed together to investigate the thermodynamic properties of α phases in these two systems, and the effect of vibrational entropy on the order-disorder transition temperatures of the phases in α Ti-O system was first examined. A good agreement with experimentally reported phase boundaries is obtained in the Ti-Nb system by handling the mechanical instabilities introduced by the highly distorted structures. In addition, the cluster expansion coefficients for the Ti-O and Ti-Nb system offer a good starting point to investigate the phase equilibrium in Ti-Nb-O ternary alloy. We also believe the insights provided here would be helpful for those who would like to seek an efficient scheme they are confident with to investigate the phase thermodynamic properties of other hcp Ti-based alloys.

Acetonitrile real gas phase behavior from quasi-ideal gas to nanodroplets: A microscopical view.

We have applied a recently developed general purpose acetonitrile force field based on first-principles calculations to simulate acetonitrile in the gas phase at different temperatures and densities. These conditions range from nearly ideal to real gas phase behavior and condensation. The molecular dynamics simulation results agree fairly well with the experimental studies available in the literature on the gas samples. The structural analysis of aggregates and their associated interaction energies is examined and related to the early model proposed on molecular association and equilibrium determining the non-ideal behavior. The formation of dimers is mainly responsible for the non-ideal behavior of the gas at very low density, confirming suggested models based on previous experimental studies. However, when the density of the sample rises, the level of aggregation increases and the simple concept of dimerization does not hold anymore. The real behavior adopted by the gas is related to the distribution of molecular structures observed. The macroscopical view of a real gas as a generic interparticle interaction system without a defined form may then be rationalized on the basis of a defined molecular association originated by a distribution of aggregates at the low density regime. The sample with the highest density (∼1.4 × 103 molm-3) at the lowest temperature exhibits a massive aggregation where most of the acetonitrile (ACN) molecules in the simulation box form a big cluster. Its radial distribution function is similar to that of the liquid ACN. This strongly inhomogeneous distribution in the box can be considered a condensation in the gas phase under specific density-T conditions. This formation opens the door to the potential tuning of its solvent properties as a function of its size in these nanodroplets that in turn are controlled by the density-T conditions.

First-principles study of hydrogen sulfide decomposition on Sc-Ti3C2O2 single-atom catalyst.

Hydrogen sulfide gas poses significant risks to both human health and the environment, with the potential to induce respiratory and neurological effects, and a heightened fatality risk at elevated concentrations. This article investigates the catalytic decomposition of H2S on a Sc-Ti3C2O2 single-atom catalyst(SAC) using the density functional theory-based first-principles calculation approach. Initially, the adsorption behavior of H2S on Ti3C2O2-MXene was examined, revealing weak physical adsorption between them. Subsequently, the transition metal atom Sc was introduced to the Ti3C2O2 surface, and its stability was studied, demonstrating high stability. Further exploration of H2S adsorption on Sc-Ti3C2O2 revealed direct dissociation of H2S gas molecules into HS* and H*, with HS* binding to Sc and H* binding to O on the Ti3C2O2 surface, resulting in OH groups. Using the transition state search method, the dissociation of H2S molecules on the SAC's surface was investigated, revealing a potential barrier of 2.45eV for HS* dissociation. This indicates that the H2S molecule can be dissociated into H2 and S with the action of the Sc-Ti3C2O2 SAC. Moreover, the S atom left on the catalyst surface can aggregate to produce elemental S8, desorbing on the catalyst surface, completing the catalytic cycle. Consequently, the Sc-Ti3C2O2 SAC is poised to be an efficient catalyst for the catalytic decomposition of H2S. The Dmol3 module in Materials Studio software based on density functional theory is used in this study. The generalized gradient approximation method GGA-PBE is used for the exchange-correlation function. The complete LST/QST and the NEB methods in the Dmol3 module were used to study the minimum energy path of the dissociation of hydrogen sulfide molecules on the catalyst surface.

Influence of Pressure on Structural, Electronic, Optical, and Elastic Properties of Lead-Free Chalcogen Perovskite LaLuS3 via First-Principles Calculations: Implications for Optoelectronic Applications

Abstract Chalcogen perovskites have garnered increasing attention as promising materials for optoelectronic applications. In this study, we employed the first-principles method to investigate the structural, electronic, optical, and elastic properties of LaLuS3 under hydrostatic pressure at various levels. Through a thorough analysis of the calculated electronic structures, we observed that LaLuS3 exhibits direct band gaps, with the magnitudes of these gaps changing as the pressure varied. Specifically, the band gaps decrease by 2.19 eV, 2.025 eV, 1.365 eV, and 0.6043 eV at hydrostatic pressures of 0%, 10%, 20%, and 30% GPa, respectively. Furthermore, we observed shifts in the conduction band minimum and valence band maximum positions, indicating the potential of LaLuS3 for perovskite-based devices. This suggests that external pressure can serve as a powerful tool for designing new functional materials with intriguing properties. Our investigation also revealed promising optical properties of LaLuS3 under high pressures, further affirming its potential for optoelectronic and solar cell applications. The optical functions of the material are enhanced with increasing pressure, particularly in the ultraviolet range, highlighting its suitability for a wide range of optoelectronic devices. Moreover, while maintaining mechanical stability, hydrostatic pressure exerts a significant influence on the mechanical properties of LaLuS3. Lastly, our calculations on anisotropy demonstrate that applied pressure can enhance the anisotropic nature of LaLuS3. This comprehensive study underscores the efficacy of hydrostatic pressure as a systematic approach to modifying the photovoltaic performance of halide perovskites.

Machine learning-aided first-principles calculations of redox potentials

We present a method combining first-principles calculations and machine learning to predict the redox potentials of half-cell reactions on the absolute scale. By applying machine learning force fields for thermodynamic integration from the oxidized to the reduced state, we achieve efficient statistical sampling over a broad phase space. Furthermore, through thermodynamic integration from machine learning force fields to potentials of semi-local functionals, and from semi-local functionals to hybrid functionals using Δ-machine learning, we refine the free energy with high precision step-by-step. Utilizing a hybrid functional that includes 25% exact exchange (PBE0), this method predicts the redox potentials of the three redox couples, Fe3+/Fe2+, Cu2+/Cu+, and Ag2+/Ag+, to be 0.92, 0.26, and 1.99 V, respectively. These predictions are in good agreement with the best experimental estimates (0.77, 0.15, 1.98 V). This work demonstrates that machine-learned surrogate models provide a flexible framework for refining the accuracy of free energy from coarse approximation methods to precise electronic structure calculations, while also facilitating sufficient statistical sampling.

Theoretical study on photoelectric properties of ferroelectric photovoltaic perovskite CsGeBr3 based on first-principle calculations

Ferroelectric photovoltaic materials have attracted great attention because of their unique photoelectric conversion mechanism, high photo-generated voltage, and adjustable polarization intensity. Traditional ferroelectric oxide perovskites such as BaTiO3, BiFeO3, and Pb(ZrTi)O3 have attracted much attention but they are not suitable as light absorbing layers in solar cells, due to the large optical bandgap, low light absorption rate, and small photogenerated current. Therefore, it is necessary to seek prominent materials with both ferroelectric and suitable band gaps. Recently, the evidence of ferroelectricity in the typical three-dimensional all-inorganic halide perovskites CsGeX3, with band gaps of 1.6 eV to 2.3 eV has been confirmed. However, the spontaneous polarization of ferroelectric perovskite CsGeX3 is ∼10 to 20 μc cm−2 which is weaker than that of ABO3 (∼26 to 75 μc cm−2). Strain engineering has a significant influence on the properties of semiconductor materials by controlling the lattice scaling and the internal atomic spacing. Hence, in this work, strain engineering is introduced to adjust the ferroelectric polarization and the photoelectric properties of ferroelectric perovskite CsGeBr3. The calculated results show that when the applied compressive strain increases from 0% to −4%, the spontaneous polarization of ferroelectric perovskite CsGeBr3 increases from 14.23 μc cm−2 to 51.61 μc cm−2, and the band gap reduces from 2.3631 eV to 1.5310 eV. The effective mass of electrons and holes gradually reduces, exciton binding energies decrease from 48 meV to 5 meV, and the optical absorption coefficient is strongly enhanced from 3 × 105 cm−1 to 5 × 105 cm−1 in the visible range. Besides, the power conversion efficiency(PCE) of CsGeBr3 is significantly increased from 16.95% to 26.77%. Therefore, the results indicate that the application of compressive strain can increase the ferroelectric polarization and enhance the original photovoltaic performance of ferroelectric perovskite CsGeBr3. Our theoretical calculations can provide useful insights and beneficial guidance into experimental studies of ferroelectric perovskites in photoelectric applications.

Strain-Controlled Formation Energy and Migration of Nitrogen Vacancy in Al1-xScxN: A First-Principles Study.

The impact of strain on the formation energy and migration behavior of nitrogen vacancies (VNs) in Al1-xScxN has been investigated by first-principles calculations. The formation energy of VNs is obtained by total energy calculations. The migration barrier calculation utilizes the climbing nudged elastic band method. It is found that the formation energy of VNs is highly tunable with respect to the strain. The formation energy of VNs increases with the tensile strain increasing to +4% and decreases with the increasing compressive strain to -4%. A minimum formation energy of 4.11 eV is obtained when -4% strain is applied. Furthermore, the migration behavior of VNs is studied by calculating the migration barriers. Calculation results show that the migration barrier is strongly affected by strain. When the strain is -4%, the barrier is 2.46 eV while the barrier is increased to 2.71 eV under +4% strain. Therefore, a tensile strain can prevent the formation and migration of VNs. These findings suggest that strain engineering may serve as a tool for regulating VNs behavior in Al1-xScxN, potentially alleviating the ferroelectric degradations associated with VNs.

Effective P-type N-doped α-Ga2O3 from First-Principles Calculations

Effective P-type N-doped α-Ga2O3 from First-Principles Calculations

New stable inorganic BX (X= P, As, Sb) biphenylene and graphenylene monolayers: A first-principles investigation

Porous two-dimensional (2D) materials with semiconducting property are promising candidates for a variety of multifunctional energy harvesting applications. Motivated by the successful synthesis of porous organic biphenylene and graphenylene materials, herein, we demonstrate the ground-state properties of a new family of b-BX and g-BX monolayers inorganic biphenylene and graphenylene monolayers using first-principles calculations based on density functional theory. Stability tests show that the b-BX and g-BX monolayers are energetically, mechanically, dynamically, and thermally stable. Moreover, g-BX (X = As, Sb) monolayers are auxetic 2D materials. According to the HSE06 electronic band structure results, these monolayers of b-BX and g-BX exhibit moderate and wide indirect bandgap semiconducting properties. These novel ground state properties of b-BX and g-BX monolayers demonstrate their aforementioned potential applications in addition to optoelectronic, thermoelectric, and flexible electronics. Besides all these newly proposed b-BX and g-BX monolayers expand the family of inorganic biphenylene and graphenylene non-magnetic materials.

Competing Charge Transfer and Screening Effects in Two-Dimensional Ferroelectric Capacitors.

Two-dimensional (2D) ferroelectrics promise ultrathin flexible nanoelectronics, typically utilizing a metal-ferroelectric-metal sandwich structure. Electrodes can either contribute free carriers to screen the depolarization field, enhancing nanoscale ferroelectricity, or induce charge doping, disrupting the long-range crystalline order. We explore electrodes' dual roles in 2D ferroelectric capacitors, supported by first-principles calculations covering a range of electrode work functions. Our results reveal volcano-type relationships between ferroelectric-electrode binding affinity and work function, which are further unified by a quadratic scaling between the binding energy and the transferred interfacial charge. At the monolayer limit, charge transfer dictates the ferroelectric stability and switching properties. This general characteristic is confirmed in various 2D ferroelectrics including α-In2Se3, CuInP2S6, and SnTe. As the ferroelectric layer's thickness increases, the capacitor stability evolves from a charge-transfer-dominated state to a screening-dominated state. The delicate interplay between these two effects has important implications for 2D ferroelectric capacitor applications.

Effect of alloying elements on zinc-induced liquid metal embrittlement in steels: A first-principles study

Liquid metal embrittlement (LME) induced by Zn melt in galvanized steels during spot-welding poses a significant challenge to the advancement of the automotive industry. A critical strategy to address this challenge is identifying promising alloying elements capable of mitigating LME. High-throughput first-principles calculations were employed to investigate the segregation behavior of 22 common alloying elements at the Σ5(310) grain boundary of iron and their impact on the grain boundary energy. The results indicate that volume distortion upon doping of the alloying elements predominantly influences their segregation behavior, while the weak bonding between Zn and Fe is responsible for the grain boundary embrittlement. Exploration of solute interaction between Zn and the other alloying element in the Fe grain boundary model reveals that the attraction between metallic doping elements and Zn correlates with both the elastic effects and the magnetic properties of the dopant, while the repulsion between non-metallic elements and Zn is primarily governed by the elastic effects. Separating the grain boundary strengthening energy into mechanical and chemical contributions shows that they correlate linearly with variations in volume of the doping site and changes in bond energy for bonds associated with the doping site at the grain boundary, respectively. Accordingly, the strengthening effect of the doping elements can be estimated by evaluating the induced changes in local volume and bond energies on grain boundaries. Furthermore, potential alloying elements to mitigate the Zn-induced LME are screened and discussed, with B and Mo being the most promising candidates.

Theoretical study of the nonlinear magnon-phonon coupling in CoF2.

The coupling and interplay between magnon and phonon are important topics for spintronics and magnonics. In this work we studied the nonlinear magnon-phonon coupling in CoF2. First-principles calculations demonstrate that the antiferromagnetic resonance magnon drives a phonon with B1g character; the oscillating driving force has a frequency twice of that of the magnon. Comparing with similar materials indicates a strong correlation between the strength of nonlinear magnon-phonon coupling and the orbital magnetic moment of the magnetic ion. This work pave the way for theoretical study of nonlinear magnon-phonon coupling.&#xD.

Br-Vacancies Induced Variable Ranging Hopping Conduction in High-Order Topological Insulator Bi4Br4.

The defects have a remarkable influence on the electronic structures and the electric transport behaviors of the matter, providing the additional means to engineering their physical properties. In this work, a comprehensive study on the effect of Br-vacancies on the electronic structures and transport behaviors in the high-order topological insulator Bi4Br4 is performed by the combined techniques of the scanning tunneling microscopy (STM), angle-resolved photoemission spectroscopy (ARPES), and physical properties measurement system along with the first-principle calculations. The STM results show the defects on the cleaved surface of a single crystal and reveal that the defects are correlated to the Br-vacancies with the support of the simulated STM images. The role of the Br-vacancies in the modulation of the band structures has been identified by ARPES spectra and the calculated energy-momentum dispersion. The relationship between the Br-vacancies and the semiconducting-like transport behaviors at low temperature has been established, implying a Mott variable ranging hopping conduction in Bi4Br4. The work not only resolves the unclear transport behaviors in this matter, but also paves a way to modulate the electric conduction path by the defects engineering.

Superconductivity in Nb5Ir3N: a nitrogen-filled electride

Abstract The hexagonal Mn5Si3-type compounds possess the capability to accommodate specific atoms in the interstices, thereby creating filled Mn5Si3-type structures. In Nb-based Mn5Si3-type system, interstitial atoms like carbon (C) or oxygen (O) have been identified to induce or enhance superconductivity. However, the compounds filled with nitrogen (N) are scarce, and the existence of a N-filled superconductor remains unknown. Here, we report the discovery of a novel ternary nitride superconductor, Nb5Ir3N, synthesized via incorporating N into the electride Nb5Ir3. The crystal structure of Nb5Ir3N conforms to the filled Mn5Si3-type, belonging to the P63/mcm space group (No. 193), with cell parameters a = b = 7.8398(2) Å and c = 5.1108(1) Å. Electrical resistivity and magnetic susceptibility demonstrate that Nb5Ir3N is a type-II superconductor with a T c of 8.7 K. The estimated lower and upper critical fields are 11.0 mT and 12.16 T, respectively. Moreover, specific heat measurements confirm the bulk superconductivity with enhanced electron-phonon coupling in Nb5Ir3N, as demonstrated by the normalized specific heat jump ΔC e/γT c ~ 1.59. First-principles calculations emphasize the strong spin-orbit coupling in Nb5Ir3N.

Two-Dimensional Intrinsic Ferromagnetic Materials of Janus 2H-NbXY (X, Y = S, Se and Te, X ≠ Y) Monolayers with High Curie Temperature and Large Magnetic Anisotropy

Abstract Two-dimensional (2D) intrinsic ferromagnetic materials with high magnetic anisotropy (MA) and Curie temperature (Tc) are desirable for low-dimensional spintronic applications. In this work, a highly stable Janus NbXY (X, Y = S, Se and Te, X ≠ Y) with intrinsic ferromagnetism is investigated by using first-principles calculations. The results demonstrate that the MAE values of the NbSSe, NbSTe and NbSeTe MLs are as high as -2.185 meV, -4.013 meV and -4.495 meV per unit cell, respectively, which is higher than the previously reported 2D intrinsic ferromagnetic materials such as FeBrI, NiI2, and VSSe MLs etc. And they are still large enough for practical applications. The Curie temperature (Tc) is estimated to be 160 K for NbSSe, 260 K for NbSTe, and 200 K for NbSeTe monolayer based on Monte Carlo simulation. The MAE and Tc could be effectively controlled and enhanced by the biaxial strains. The MAE of NbSSe, NbSTe and NbSeTe MLs can be increased by 8.7%, 24.9% and 14.1%, and reach up to -2.375, -5.015 and -5.131 meV at 5% compressive strain, respectively. Remarkably, at 5% tensile strain, the room temperature of 300 K can be reached for NbSTe monolayer, which is rather promising for its practical application. The large magnetic anisotropy energy and controllable Curie temperature make the NbXY monolayers a promising candidate for applications in spintronic devices at the nanoscale and in high-density data storage.

Influence of Hf Doping on the Oxygen Behaviors on ZrCo(110) Surface Using First-Principles Calculation

ZrCo alloy is easily poisoned by impurity gases such as O2, CO, and CO2, resulting in a deterioration in hydrogen storage performance. In this study, we conducted a comprehensive investigation into the adsorption and dissociation characteristics of oxygen on the ZrCo(110) surface using first-principles calculations. Previous studies indicated that the anti-disproportionation properties of ZrCo alloy can be significantly improved by Hf substitution, but the effect of Hf doping on the anti-poisoning properties has not been reported. We also examined the effect of Hf doping on the adsorption, dissociation, and diffusion characteristics of oxygen. It is found that on the ZrCo(110) surface, O2 molecules are easily dissociated and then stably adsorbed at the hollow site. Oxygen atoms will fill the surface preferentially and then diffuse inward. The doping of Hf has an insignificant impact on the adsorption or dissociation behavior of oxygen in comparison to the pure ZrCo surface. However, a notable observation is that the doping of Hf resulted in a reduction in the diffusion barrier for oxygen from the surface to the subsurface by 0.61 eV. Consequently, our study suggests that doping Hf is not an advisable strategy for improving the ZrCo(110) surface’s resistance to O2 poisoning because of improved oxygen permeability.

First-principles calculation to investigate structural, electronic, optical, and thermodynamics properties of perovskite KXO3 (K[dbnd]Ta and Zn) alloys for photovoltaic and smart window applications

Compounds KXO3 (X = Zn and Ta) properties are explored using CASTEP (Cambridge serial total energy package) software along with Generalized Gradient Approximation (GGE) and PBE exchange-correlation functionals that have pm3m (221) symmetry with cubic. Electronic characteristics associated with the electronic band structure (phase), total density of states TDOS, partial DOS, and elemental PDOS have been calculated. KTaO3 and KZnO3 show an indirect energy bandgap of 1.61 eV and 4.53 eV, respectively; thus, KTaO3 is a semiconductor while KZnO3 is an insulator. Optical properties disclose that maximum absorption occurs in both visible and ultra-violet ranges of the electromagnetic (EM) spectrum of KTaO3 and KZnO3. The elastic properties of the compounds show that KTaO3 is ductile and KZnO3 is brittle, and the brittleness of the compound will increase the reflection of the radiation, and KTaO3 will conduct radiation more frequently in the visible region.

Moiré superlattices arising from growth induced by screw dislocations in layered materials

Abstract Moiré superlattices (MSLs) are modulated structures produced from homogeneous or heterogeneous two-dimensional layers stacked with a twist angle and/or lattice mismatch. Enriching the methods for fabricating MSL and realizing the unique emergent properties are key challenges on its investigation. Here we recommend that the spiral dislocation driven growth is another optional method for the preparation of high quality MSL samples. The spiral structure stabilizes the constant out-of-plane lattice distance, causing the variations in electronic and optical properties. Taking SnS2 MSL as an example, we find prominent properties including large band gap reduction (~0.4 eV) and enhanced optical activity. First-principles calculations reveal that these unusual properties can be ascribed to the locally enhanced interlayer interaction associated with the Moiré potential modulation. We believe that the spiral dislocation driven growth would be a powerful method to expand the MSL family and broaden their scope of application.

Investigation of N C and B C bilayers as anode materials for Li-ion batteries by first-principles calculations.

The best choice today for a realistic method of increasing the energy density of a metal-ion battery is to find novel, effective electrode materials. In this paper, we present a theoretical investigation of the properties of hitherto unreported two-dimensional B C and N C bilayer systems as potential anode materials for lithium-ion batteries. The simulation results show that N C bilayer is not suitable for anode material due to its thermal instability. On the other hand B C is stable, has good electrical conductivity, and is intrinsically metallic before and after lithium intercalation. The low diffusion barrier (0.27 eV) of Li atoms shows a good charge and discharge rate for B C bilayer. Moreover, the high theoretical specific capacity (579.57 mAh/g) connected with moderate volume expansion effect during charge/discharge processes indicates that B C is a promising anode material for Li-ion batteries.