Finite-difference Time-domain Simulations Research Articles

Multifunctional terahertz device based on plasmon-induced transparency

Enhancing light-matter interaction is crucial in optics for boosting nanophotonic device performance, which can be achieved via plasmon-induced transparency (PIT). In this study, a polarization-insensitive PIT effect at terahertz frequencies is achieved using a novel metasurface composed of a cross-shaped graphene structure surrounded by four graphene strips. The high symmetry of this metasurface ensures its insensitivity to changes in the polarization angle of incident light. The PIT effect, stemming from the coupling of graphene bright modes, was explored through finite difference time domain (FDTD) simulations and coupled mode theory (CMT) analysis. By tuning the Fermi level in graphene, we effectively modulated the PIT transparent window, achieving high-performance optical switching with a modulation depth (88.9% < MD < 98.0%) and insertion losses (0.17 dB < IL < 0.51 dB) at a carrier mobility of 2 m2/(V·s). Furthermore, the impact of graphene carrier mobility on the slow-light effect was examined, revealing that increasing the carrier mobility from 0.5 m2/(V·s) to 3 m2/(V·s) boosts the group index from 126 to 781. These findings highlight the potential for developing versatile terahertz devices, such as optical switches and slow-light apparatus.

Flat optics of nonuniform phase gradient metasurfaces

Flat optics of uniform phase gradient metasurfaces based on the generalized Snell’s law has been extensively studied. The optics of nonuniform phase gradient metasurfaces (NPGMs) is less clear. Here based on Huygens’ principle and finite-difference time-domain (FDTD) simulation, we explore the optical properties of NPGMs made of nanorods (meta-atoms), which can be tuned by modulation of propagation phase and geometric phase. It is found that the nonuniformity of phase gradient may lead to multichannel anomalous reflection/refraction. The multiple beam splitters with arbitrary intensity ratio can be achieved by using the amplitude/phase modulation. Based on our design principle, we can obtain different anomalous reflection patterns (with channels ±1, ±2, both ±1 and ±2, or no reflection at anomalous angle) by different arrangement of just two types of meta-atoms. In addition, we are able to achieve chiral anomalous reflections for designed NPGMs made of nanorods and L-shaped nanoparticles. Our formulism provides general design guidance for NPGMs and can be used to realize the beam splitting function with adjustable angle and intensity ratio.

TiO2-BN/CNTs coating with radiative cooling and reduced friction

To date, the demand for electronic packaging materials with combined highly efficient heat dissipation and low friction attracts intensive attention. There have been hardly any reports of coatings that provide simultaneous radiative cooling, thermal conduction, and friction reduction properties. In the present work, a novel biomimetic nanocomposite coating is gown on the titanium alloy substrate. The coating consists of a TiO2 ceramic layer adorned with hemispherical protrusions and is enriched with hexagonal boron nitride (h-BN) flakes and CNTs on the surface. The optimal microstructures are determined through Finite Difference Time Domain (FDTD) simulation calculations and then prepared using plasma electrolytic oxidation (PEO). The results show that the hierarchical micro/nanostructures enable the coating to achieve an infrared emissivity of ∼ 0.9 within the 3–14 wavelength range, whilst h-BN and CNTs contribute to the thermal conduction of the TiO2-BN/CNTs ceramic coating. The advantage of the biomimetic nanocomposite coating over the bare titanium alloy is that the coating facilitates a reduction in the equilibrium temperature of a 5 W LED by around 21.5 °C. In addition, the coating exhibits outstanding friction reduction performance with a low friction coefficient (COF) of 0.15 over a sliding distance of 94.2 m, benefitted from the lubrication effect of h-BN and CNT. This work introduces a straightforward and environmentally friendly approach to fabricating bifunctional thermal regulation materials.

Modeling full PCSELs and VCSELs using modified rigorous coupled-wave analysis

An integrated rigorous coupled-wave analysis (RCWA) algorithm is presented in this paper, which can simulate full vertical-cavity surface-emitting laser (VCSEL) and photonic crystal surface-emitting laser (PCSEL) structures. A classic RCWA can only analyze a structure when the light source is incident from the top, bottom, or both sides of the device. However, for VCSEL applications, the light source is generated in the middle and propagates in both directions. A bidirectional scattering matrix method and doubling algorithm are implemented in RCWA. The resonant wavelength and Q factor of a VCSEL can then be found in the output spectrum. The accuracy and execution speed are compared with those of the Lumerical finite-difference time-domain (FDTD) method for several VCSEL and PCSEL designs. The results show that the maximum discrepancy between RCWA and FDTD is less than 3 nm, and the difference in the far-field divergence angle is less than 0.5°. The speed of RCWA also outperforms FDTD simulation significantly.

Breaking the mirror symmetry of photonic spin-orbit interaction using a geometrically symmetric chiral resonator

The symmetries of photonic spin-orbit interaction (PSOI) at waveguide interfaces provide flexible modulation capability but limit their practical implementation due to the stringent requirements of excitation conditions. This limitation can be mitigated by intentionally breaking local symmetries, offering a novel platform for achieving directional coupling and optical isolation with PSOI-based interfaces. For example, breaking the inversion symmetry of a nanofiber PSOI interface using a nanosphere scatterer reduces the required accuracy in the size and position of excitation spots. This study introduces a novel approach to break the mirror symmetry of a PSOI-based nanofiber waveguide by coupling it with a geometrically symmetric chiral gold nanohelicoid (GNH) resonator, which relaxes the original requirement of circularly polarized excitations. Finite-difference time-domain simulations demonstrate unidirectional light coupling and propagation under both circularly and linearly polarized excitations, showcasing the versatility of this hybrid symmetry-broken system. The Fano-like features observed in directionality spectra align with the GNH’s circular dichroism spectrum, emphasizing an intricate correlation between plasmonic near-field chirality and far-field scattering dichroism. This work paves the way for enhancing the functionalities of PSOI-based waveguide interfaces through locally coupling them with nanoscale chiral resonators, thereby expanding their application in quantum photonics, information transport and plasmonic nanophotonics.

High-efficiency self-focusing metamaterial grating coupler in silicon nitride with amorphous silicon overlay

Efficient fiber-chip coupling interfaces are critically important for integrated photonics. Since surface gratings diffract optical signals vertically out of the chip, these couplers can be placed anywhere in the circuit allowing for wafer-scale testing. While state-of-the-art grating couplers have been developed for silicon-on-insulator (SOI) waveguides, the moderate index contrast of silicon nitride (SiN) presents an outstanding challenge for implementing efficient surface grating couplers on this platform. Due to the reduced grating strength, a longer structure is required to radiate the light from the chip which produces a diffracted field that is too wide to couple into the fiber. In this work, we present a novel grating coupler architecture for silicon nitride photonic integrated circuits that utilizes an amorphous silicon (α-Si) overlay. The high refractive index of the α-Si overlay breaks the coupler’s vertical symmetry which increases the directionality. We implement subwavelength metamaterial apodization to optimize the overlap of the diffracted field with the optical fiber Gaussian mode profile. Furthermore, the phase of the diffracted beam is engineered to focalize the field into an SMF-28 optical fiber placed 55 µm above the surface of the chip. The coupler was designed using rigorous three-dimensional (3D) finite-difference time-domain (FDTD) simulations supported by genetic algorithm optimization. Our grating coupler has a footprint of 26.8 × 32.7 µm2 and operates in the O-band centered at 1.31 μm. It achieves a high directionality of 85% and a field overlap of 90% with a target fiber mode size of 9.2 µm at the focal plane. Our simulations predict a peak coupling efficiency of − 1.3 dB with a 1-dB bandwidth of 31 nm. The α-Si/SiN grating architecture presented in this work enables the development of compact and efficient optical interfaces for SiN integrated photonics circuits with applications including optical communications, sensing, and quantum photonics.

Au nanodisks-based 2D photonic crystals fabricated by single-beam laser interference lithography: A simple and reliable alternative for highly efficient large-scale SERS molecular sensors

Noble metal-based Photonic Crystals (PCs) have emerged as outstanding candidates for precise light management, projecting applications in strategic areas for society like high-sensitivity and fast molecular (inorganic/organic/bio) sensing by Surface-Enhanced Raman Spectroscopy (SERS). In this work, we report an exhaustive study on the potential of large-scale (active area >1 [cm2]) Au nanodisks-based 2D PCs fabricated by single-beam Laser Interference Lithography (LIL) for high-performance SERS molecular sensing. This technique was used to fabricate periodic nanoarrays (period of 470 [nm]) of Au nanodisks with thicknesses from 50 up to 125 [nm]. The period was chosen following Finite-Difference Time-Domain (FDTD) simulations that suggested the best electric-near field enhancement for this condition. Confocal Raman microscopy and Methylene Blue (MB) as active Raman marker, were used to assess the samples' performance for molecular sensing. SERS studies have shown that the nanodisks' thickness can be a considerable size parameter for the Raman signal amplification, observing higher signal enhancements for higher thicknesses. The observed thickness effects on the Raman signal enhancement were consistent with FDTD simulations, which predicted higher electric-near field amplifications for higher thickness within the red/near-infrared range. Results show that our PCs enable to measure the characteristic Raman footprint of the analyte with good spectral resolution using relatively low powers (0.04–1 [mW]) and short acquisition times (1–30 [s]), considering an MB surface mass density as low as 2.6 [ng/cm2]. SERS enhancement factors as high as 2 x 107 were achieved for PCs with the highest thickness, representing a competitive performance concerning typically reported values (104–107) for current noble metal-based PCs technologies and a new record concerning PCs fabricated by LIL (104–105). This research demonstrates the high competitivity of these simple Au nanodisks-based 2D PCs, fabricated using an efficient large-scale and low-cost lithography technique, for fast, high spectral resolution and highly reproducible SERS-based molecular sensing.

Selective Enhancement of Viewing Angle Characteristics and Light Extraction Efficiency of Blue Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes through an Easily Tailorable Si3N4 Nanofiber Structure.

We selectively improved the viewing angle characteristics and light extraction efficiency of blue thermally activated delayed fluorescence (TADF) organic light-emitting diodes (OLEDs) by tailoring a nanofiber-shaped Si3N4 layer, which was used as an internal scattering layer. The diameter of the polymer nanofibers changed according to the mass ratio of polyacrylonitrile (PAN) and poly(methyl methacrylate) (PMMA) in the polymer solution for electrospinning. The Si3N4 nanofiber (SNF) structure was fabricated by etching an Si3N4 film using the PAN/PMMA nanofiber as a mask, making it easier to adjust parameters, such as the diameter, open ratio, and height, even though the SNF structure was randomly shaped. The SNF structures exhibited lower transmittance and higher haze with increasing diameter, showing little correlation with their height. However, all the structures demonstrated a total transmittance of over 80%. Finally, by applying the SNF structures to the blue TADF OLEDs, the external quantum efficiency was increased by 15.6%. In addition, the current and power efficiencies were enhanced by 23.0% and 25.6%, respectively. The internal light-extracting SNF structure also exhibited a synergistic effect with the external light-extracting structure. Furthermore, when the viewing angle changed from 0° to 60°, the peak wavelength and CIE coordinate shift decreased from 20 to 6 nm and from 0.0561 to 0.0243, respectively. These trends were explained by the application of Snell's law to the light path and were ultimately validated through finite-difference time-domain simulations.

Triple band diamond-shaped polarization insensitive plasmonic nano emitter for thermal camouflage and radiative cooling

This study proposes the design of a novel Metal-Insulator-Metal (MIM) nano-infrared emitter that uses a unique diamond-shaped grating to achieve selective infrared absorption. Diamond-shaped nano emitter (DNE) structure exhibits four narrow resonant peaks within key absorption windows such as short-wave infrared (SWIR) mid-wave infrared (MWIR), alongside with a wide absorption band in the Non-Transmissive Infrared Range (NTIR) for thermal camouflage applications compatible with radiative cooling. Moreover, the proposed DNE is polarization insensitive as it has an in-plane symmetric design. Using the 3D Finite-Difference Time-Domain (FDTD) simulations, we demonstrate the nanoantenna’s superior performance characterized by its high absorption rates and tuned effective impedance matching. As of our knowledge, the findings suggest that this is the first time that a MIM structure achieved multiple narrow resonance peaks, located in SWIR and MWIR simultaneously, with a wide absorption range in NTIR. Represented DNE stands as a significant innovation in the field of stealth technology, providing a tunable, high-efficiency solution for managing and controlling thermal emissions across diverse applications.

Surface-Enhanced Raman Spectroscopy of Ammonium Nitrate Using Al Structures, Fabricated by Laser Processing of AlN Ceramic.

This work presents results on laser-induced surface structuring of AlN ceramic and its application in Surface-Enhanced Raman Spectroscopy (SERS). The laser processing is performed by nanosecond pulses in air and vacuum. Depending on the processing conditions, different surface morphology can be obtained. The ablation process is realized by ceramic decomposition as the formation of an aluminium layer is detected. The efficiency of the fabricated structures as active substrates in SERS is estimated by the ability of the detection of ammonium nitrate (NH4NO3). It is conducted for Raman spectrometer systems that operate at wavelengths of 514 and 785 nm where the most common commercial systems work. The obtained structures contribute to enhancement of the Raman signal at both wavelengths, as the efficiency is higher for excitation at 514 nm. The limit of detection (LOD) of ammonium nitrate is estimated to be below the maximum allowed value in drinking water. The analysis of the obtained results was based on the calculations of the near field enhancement at different conditions based on Finite Difference Time Domain simulation and the extinction spectra calculations based on Generalized Mie scattering theory. The structures considered in these simulations were taken from the SEM images of the real samples. The oxidation issue of the ablated surface was studied by X-ray photoelectron spectroscopy. The presented results indicated that laser structuring of AlN ceramics is a way for fabrication of Al structures with specific near-field properties that can be used for the detection of substances with high social impact.

Simulation and reconstruction for 3D elastic wave using multi-GPU and CUDA-aware MPI

3D finite-difference time-domain numerical simulation and reconstruction based on the domain decomposition technique are essential parts of high-performance computation for reverse-time migration and full-waveform inversion. However, the low GPU utilization in computing for small-sized models and the tremendous memory consumption for large-sized models may result in low computational efficiency and high memory costs. This paper proposes a contiguous memory management (CMM) method and a variable-order wavefield reconstruction (VWR) method. The CMM allocates the memory of many small-sized arrays used for MPI communications on a larger-sized contiguous memory block, which aims to reduce the number of MPI communications between subdomains and improve the communication bandwidth, thus reducing the MPI time overhead and improving the GPU utilization. Meanwhile, the VWR can flexibly set the number of layers of boundary wavefield used for source wavefield reconstruction according to the host memory capacity and accuracy requirements. Since one layer of boundary wavefield could be stored using the VWR, the memory consumption of host memory can be significantly alleviated. Numerical experiments show that GPU utilization in computing for the model with a size of 1213 can be improved from 25% to 90% using the CMM method, and the VWR method can reduce memory consumption by about 86% while maintaining good accuracy in wavefield reconstruction. In addition, the issue of how to obtain a domain decomposition scheme with optimal performance is discussed in this paper.

Programmable Colloids with Analogous Hypercoordination Complex Architectures.

Colloidal molecule clusters (CMCs) are promising building blocks with molecule-like symmetry, offering exceptional synergistic properties for applications in plasmonics and catalysis. Traditional CMC fabrication has been limited to simple molecule-like structures utilizing isotropic particles. Here, we employ molecular dynamics simulation to investigate the co-assembly of anisotropic nanorods (NRs) and the stimulus-responsive polymer (SRP) via reversible adsorption. The results of the simulation show that it is possible to fabricate hypercoordination complex structures with high symmetry from the co-assembly of NRs and the SRP, even in analogy to the Th(BH4)4 structure. The coordination number of these CMCs can be precisely programmed by adjusting the shape and size of the ends of the NRs and the SRP cohesion energy. Furthermore, a finite-difference time-domain simulation indicates these hypercoordination structures exhibit significantly enhanced optical activity and plasmonic coupling effects. These findings introduce a new design approach for complex molecule-like structures utilizing anisotropic nanoparticles and may expand the applications of CMCs in photonics.

A low loss silicon waveguide bend based on width and curvature variations

A simple, low loss and compact 90° SOI waveguide bend constructed by using an inner circular curve and an outer Euler-circular curve was proposed, optimal designed and fabricated. By adopting this simple structure, the width and curvature of the waveguide bend can be varied simultaneously, which can effectively suppress both the mode mismatch loss and the radiation loss. Three-dimensional finite difference time domain simulation results indicate a very low excess loss of about 0.0056 dB can be achieved for equivalent bending radius of 2 μm. By using the cut-back method, a low loss of about 0.0175 dB at 1550 nm was measured, which is less than one quarter of the traditional circular bend. In addition, the wavelength dependence for the proposed SOI waveguide bend was investigated and 0.0088 dB–0.0247 dB was measured in the wavelength range of 1480∼1580 nm.

Enhancing azimuth estimation in low-resolution underwater acoustic lens systems for advanced communication and positioning

Here we aimed to enhance azimuth estimation to accurately locate a communication partner’s position by utilizing a low-resolution underwater acoustic lens system for communication. We proposed a method to accurately estimate the direction-of-arrival (DoA) by finding the center of gravity of the focal distribution using two adjacent elements of the transducer array. Ranging was to be based on time-of-flight (ToF). The method’s effectiveness was evaluated by two-dimensional finite difference time domain simulation. The lens’s focused sound field was calculated and the array was designed based on the result. DoA and ToF were estimated from the received signals and evaluated by comparing them with the true values under conditions involving 1-, 2-, and 3- users. The results confirmed DoA estimation with an error of almost 4°, even when using a lens system with an azimuth resolution of 10°. As the number of users increased, the maximum error value increased, though slightly.

High performance deep-ultraviolet light-emitting diodes with transverse electron injection

Conventional structure deep-ultraviolet light-emitting diodes (DUV-LEDs) at short wavelengths typically suffer from electron overflow and low light-emitting efficiency. For solar-blind communication application, conventional DUV-LEDs are struggling to simultaneously implement high external quantum efficiency (EQE) and high modulation bandwidth. In this paper, we report that transverse structure LEDs can overcome abovementioned problems and achieve high EQE and high modulation bandwidth. The n-AlGaN free transverse structure LEDs have been demonstrated to yield high crystal quality multiple quantum wells (MQWs). Due to the transverse electron injection, transverse structure LEDs can confine electrons well within the MQWs and avoid electron overflow. To enhance the electron injection and light extraction characteristics, the narrow and long mesa designs were optimized by both experimental and theoretical-fit results. Finite-difference time domain simulation indicates that the n+-GaN layer of the transverse LEDs with the transverse MQWs mesa design does not degrade light extraction. The transverse structure LEDs attain the maximum light output power and EQE recorded to date for DUV-LEDs below 250 nm, respectively 14 mW and 1.72 %. Furthermore, the −3 dB modulation bandwidth can be achieved up to 416 MHz.

Probing Inherent Optical Anisotropy in Substrates via Direct Nanoimaging of Mie Scattering.

In this study, we investigated the optical properties of a transition metal dichalcogenide (TMD) substrate via Mie-scattering-induced surface analysis (MISA). Employing near-field optical microscopy and finite-difference time-domain (FDTD) simulations, we systemically prove and directly visualize the Mie scattering of superspherical gold nanoparticles (s-AuNPs) at the nanoscale. Molybdenum disulfide substrates exhibited optical isotropy, while rhenium disulfide (ReS2) substrates showed anisotropic behavior attributed to the interaction with incident light's electric field. Our study revealed substantial anisotropic trends in Mie scattering, particularly in the near-infrared energy range, with ReS2 exhibiting more pronounced spectral and angular responses in satellite peaks. Our results emphasize the application of Mie scattering, exploring the optical properties of substrates and contributing to a deeper understanding of nanoscale light-matter interactions.

Optical characteristics of thin film-based InGaN micro-LED arrays: a study on size effect and far field behavior

Micro-light emitting diodes (µ-LEDs) are considered the key enabler for various high-resolution micro-display applications such as augmented reality, smartphones or head-up displays. Within this study we fabricated nitride-based µ-LED arrays in a thin film chip architecture with lateral pixel sizes down to 1 µm. A metal mirror on the p-side enhances the light outcoupling via the n-side after removal of the epitaxial growth substrate. Mounted devices with pixel sizes ranging from 1×1 to 8×8 µm2 were electro-optically characterized within an integrating sphere and in a goniometer system. We measure increased external quantum efficiencies on smaller devices due to a higher light extraction efficiency (LEE) as predicted by wave optical simulations. Besides this size dependence of the LEE, also the far field properties show a substantial change with pixel size. In addition, we compared µ-LEDs with 40 nm and 80 nm thick aluminium oxide around the pixel mesa. Considerably different far field patterns were observed which indicate the sensitivity of optical properties to any design changes for tiny µ-LEDs. The experimentally obtained radiation behavior could be reasonably predicted by finite-difference time-domain simulations. This clearly reveals the importance of understanding and modeling wave optical effects inside µ-LED devices and the resulting impact on their optical performance.

Construction of an Au/g-C3N4/GO/Au substrate by a layer-by-layer assembly approach for surface-enhanced Raman spectroscopy

In this work, an Au/g-C3N4/GO/Au hybrid nanofilm for surface-enhanced Raman scattering (SERS) substrate application was prepared by a facile layer-by-layer assembly technique using nanosheet-structured graphitic carbon nitride (g-C3N4), graphene oxide (GO) and 40 nm-gold nanoparticles (Au NPs). The effects of composition, assembly sequence and assembly cycles on the SERS performance were optimized to achieve the SERS-active substrate. The detection limit of Au/g-C3N4/GO/Au substrate for crystal violet and rhodamine 6 G probe molecules reached as high as 10−8 M, with good stability and uniformity. Its further application in food colorants detection (erythrosine, carmine and temptation red) had successfully met the national food safety standards and the quantitative detection for erythrosine and temptation red had also been established. Based on finite-difference time-domain element simulation and density functional theory quantum chemical calculation, the mechanism of the SERS effect of the substrate was unveiled, which is attributed to the combination of electromagnetic enhancement effect of Au nanoparticle aggregates and chemical enhancement effect of GO and g-C3N4. Notably, water droplet evaporation induced Raman enhancement was observed on the Au/g-C3N4/GO/Au substrate. This can be ascribed to the inhomogeneous evaporation of the droplet that promotes the enrichment of the probe molecules into the center of the droplet. This novel enhancement strategy provides a new idea for further improving detection sensitivity of SERS substrate materials.

Investigations on Optical Absorption and the Pyro-phototronic Effect with Selectively Patterned Black Silicon for Advanced Photodetection.

A novel property existing in the stain-etching technique that eliminates the need for expensive etchant masks in the texturization process of silicon wafers was identified. Through the combination of grayscale lithography and stain-etching methodologies, selective patterning of silicon with AR-P 3510 T, a positive-photoresist mask, was carried out. The etch area ratio was varied in nine different patterns of various feature sizes ranging from 400 to 1500 μm. The optical characteristics of the patterned substrates were determined from diffuse reflectance spectroscopy analysis, and the results were supported with finite-difference time-domain simulations. Complimenting the improvement in optical properties, the electrical losses in microwell-patterned photodetector devices have been reduced with an electro-optic optimum value of the surface enhancement factor, γ. The photodetecting efficiency of a selectively patterned microwell photodetector device exceeded the planar and black silicon photodetector devices with a considerable improvement in the pyro-phototronic effect. This work suggests an alternative for black silicon optoelectronic devices providing a new route to fabricate selectively patterned substrates with an achieved detectivity 16- and 20-fold higher than black and planar silicon photodetector devices, respectively.

Investigation of optical polarization characteristics of ultraviolet-C AlGaN multiple quantum wells by angle-resolved cathodoluminescence

AlGaN-based ultraviolet-C (UV-C) light-emitting diodes (LEDs) face challenges related to their extremely low external quantum efficiency, which is predominantly attributed to the remarkably inadequate transverse magnetic (TM) light extraction efficiency (LEE). In this study, we employ angle-resolved cathodoluminescence (ARCL) spectroscopy to assess the optical polarization of (0001)-oriented AlGaN multiple quantum well (MQW) structures in UV-C LEDs, in conjunction with a focused ion beam and scanning electron microscopy (FIB/SEM) system to etch samples with various inclination angles (θ) of sidewall. This technique effectively distinguishes the spatial distribution of TM- and transverse electric (TE)-polarized photons contributing to the luminescence of the MQW structure. CL spectroscopy confirms that UV-C LEDs with a θ of 35° exhibit the highest CL signal compared to samples with other θ. Furthermore, we establish a model using finite difference time domain (FDTD) simulation to validate the mechanism of the outcomes. The complementary contribution of TM and TE photons at different specific angles are distinguished by ARCL and confirmed by simulation. At angles near the sidewall, the CL is dominated by the TM photons, which mainly contribute to the increased LEE and the decreased degree of polarization (DOP) to make the spatial distribution of CL more uniform. Additionally, this method allows us to analyze the polarization of light without the need for polarizers, enabling the differentiation of TE and TM modes. This distinction provides flexibility for selecting different emission mode based on various application requirements. The presented approach not only opens up new opportunities for enhanced UV-C light extraction but also provides valuable insights for future endeavors in device fabrication and epitaxial film growth.