Final Research Project Research Articles

PENGARUH PELATIHAN KERJA TERHADAP PENINGKATAN KUALITAS KINERJA ROOM ATTENDANT DI HOTEL BEST WESTERN PREMIER PANBIL BATAM

This study aims to determine the effect of job training on the performance quality of room attendants at the Best Western Premier Panbil Hotel, Batam City. This type of research uses quantitative methods. The population and sample in this study were all Room Attendant Housekeeping employees. The sample collection technique used in this study uses a saturated sampling technique. The method used in testing the hypothesis includes using. Validity Test, Reliability Test, Normality Test, Linearity Test, T (Partial) Test, and using Simple Linear Regression Analysis. The data obtained is data that is the result of the respondent's answers to the questionnaires distributed. The results of this study indicate that there is a significant influence between job training on improving the quality of room attendant performance. The results of R square found that job training variables affect the performance of room attendant employees by 72.8%, and the remaining 28.2% is influenced by other factors outside the observed variables. Suggestions for the Best Western Premier Panbil Hotel, this final project research can be used as a reference or reference material by the hotel where the author's research pays more attention to the needs and performance of room attendants

ACCOUNTING SYSTEM FOR PURCHASING RAW MATERIALS ON CREDIT AT PT. XYZ IN BEKASI

ABSTRACT
 This final project research aims to determine the procedure for purchasing raw materials on credit, to determine the accounting records for purchasing raw materials on credit, and to determine the internal control of purchasing raw materials on credit at PT. Sanoh Indonesia in Bekasi. The research method used is a qualitative descriptive method, namely a method that aims to make a description or picture of the observations obtained and present them systematically. Based on the discussion it can be concluded that the Accounting System for Purchasing of Raw Materials on Credit at PT. Sanoh Indonesia still has several divisions that have concurrent duties, such as the warehouse section and the receiving department. The internal control system contained in PT. Sanoh Indonesia is still not in accordance with the internal controls contained in Mulyadi's book.
 
 Keywords: Accounting System, Credit Purchasing

Facies Analysis and Reservoir Characterization Using Petrophysical Methods in the Interest Zone in the 'FAN' Field, Kutai Basin, East Kalimantan

One of the most prospective oil and gas producing basins in Indonesia is Kutai Basin which is located in East Borneo. In Kutai Basin there is a natural resource potential in the form of gas which is quite abundant. This is due to the richness of the source rock aspect in the Kutai Basin which is dominated by coal. Besides coal, in the Kutai Basin there is also claystone with rich organic matter (organic shale) that has an important role as a prospective source rock. Therefore, a final project research was conducted in the Kutai Basin, East Kalimantan. The purpose of the research is to identifying the type and content of subsurface lithology and fluids, calculating petrophysical parameters, and making the facies distribution map at the research site in potential and prospective zone to produce hydrocarbons which is called the zones of interest. The research is focused on reservoir rocks at the research site because the hydrocarbons accumulated in the reservoir rocks itself. By focusing research on reservoir rocks, it will be able to describe the modelling and calculation results of petrophysical parameters using several analytical methods such as qualitative and quantitative analysis methods, electrofacies and parasequence analysis methods, stratigraphic correlation analysis methods, facies analysis methods and depositional environments, and facies map analysis methods. In addition, by focusing research on reservoir rocks, it can develop and increase the level of optimization of exploration and exploitation of drilling wells. Based on the analysis data, the research location is included in the transitional depositional environment, delta in particular with distributary channels and mouth bars facies and also it can be identified some lithology such as sandstone, claystone, coal, limestone, and organic claystone and there are fluids with gas and water types.

ANALYSIS OF THE CAUSES OF DEFECTS IN THE MANUFACTURE PROCESS IMPROVING PRODUCTION QUALITY IN PIRN WINDER MACHINE BY USING STATISTICAL PROCESS CONTROL (SPC) METHOD AT PT. XYZ MAJALENGKA

In manufacturing companies, production activities are a very important activity. If the production activities produce a lot of defective products, it will cause losses in the form of additional time and raw material costs for repairing these defective products, so that quality control is needed so that the company can produce products that comply with predetermined quality standards.
 This final project research was conducted at PT. XYZ Majalengka where this company is engaged in the service industry, production activities at PT. XYZ Majalengka is carried out based on a make to order response demand strategy, namely the company carries out production activities when there are orders from consumers. This research focuses on the production process of the pirn winder machine which functions to wind yarn raw materials according to the desired weight and according to the available TFO capacity (700 gr, 714 gr, 1000gr or 1500gr).
 However, regardless of production quality standards on the pirn winder machine, it does not rule out the possibility that defects will always occur. Therefore it is necessary to have quality control in the production process of this pirn winder machine. Its function is clear to reduce the number of defects and improve the quality of production produced.
 Statistical Process Control (SPC) is a statistical analysis used for quality control, starting from monitoring, analyzing, predicting, controlling and improving the production process and product quality through control charts. Statistical quality control using SPC (Statistical Process Control) has seven statistical tools that can be used as tools to control quality, namely, check sheets, histograms, P control charts, pareto diagrams, cause and effect diagrams, scatter diagrams, and diagrams. process.

Embedding Scientific Communication and Digital Capabilities in the Undergraduate Biomedical Science Curriculum.

Introduction: Scientific communication, particularly the dissemination of research findings to both the scientific community and the general public, are skills required of graduates embarking on post-graduate studies and employment within the biomedical sciences sector. The aims of this action research project were to i) co-design an online scientific communication and digital capabilities resource, constructively aligned to the learning objectives of a final year undergraduate investigative research project; ii) ensure resource flexibility for future adaptation by others iii) embed authentic scientific communication learning assessments, namely, the preparation of a lay summary and visual abstract and iv) promote students' awareness of developed digital capabilities and transferable skills through written reflection. Materials and Methods: Student engagement, self-efficacy, experiences and performance and staff perceptions (n = 15) were evaluated by a mixed methods approach. Qualitative data was gathered from focus sessions, free text responses within questionnaires and content analysis of students' written reflections (n = 104). Quantitative data from 5-point Likert responses within student questionnaires (n = 31) and analysis of student scientific and lay writing (n = 146) using the readability parameters Flesch-Kincaid Grade Level and Flesch Reading Ease were analysed using non-parametric statistical methods. Results: A learning resource was co-designed with students, staff, local, national and international contributors and valued by both students and staff, enabling students to prepare scientific communication outputs of a professional standard by application of digital, analytical and scientific communication skills. Students prepared lay summaries which were statistically (p < 0.0001) more readable than their paired scientific abstracts. Significant correlations between easier readability of lay summaries and awarded marks for the written elements of the module were noted. Students reported their digital and communication capabilities increased significantly (p < 0.0001) throughout, from limited to good/excellent and reflected on the numerous transferable skills developed during preparation of assessments, with 75% reflecting on their digital capabilities. Discussion: Undergraduate students developed, appreciated and used varied scientific communication and digital skills to articulate research findings. The embedding of such activities throughout all levels of higher education will enable students to develop their digital and scientific skills and reflect on the development of such transferable skills for application in their future careers.

Decision Support System Design for Informatics Student Final Projects Using C4.5 Algorithm

Academic consultation activities between students and academic supervisors are necessary to help students carry out academic activities. Based on the transcript of grades obtained, many students do not choose the appropriate final project/thesis specialization fields based on their academic abilities, resulting in a lot of inconsistencies between the course grades and the final project specialization fields. The purpose of this research is to minimize the subjectivity aspect of students in choosing their final project academic supervisors and minimize the inconsistencies between the course grades and the final project specialization fields. The method used in this research is classification data mining using the Decision Tree and C4.5 Algorithm methods, with the attributes involved being courses, course grades, and specialization courses. The C4.5 Decision Tree algorithm is used to transform data (tables) into a tree model and then convert the tree model into rules. The implementation of the C4.5 Decision Tree algorithm in the specialization field decision support system has been successfully carried out, with an accuracy rate of 70% from the total calculation data. The data used in this research is a sample data from several senior students in the Informatics program at Ubhara-Jaya. The results of the research decision support system can be used as a good recommendation for the Informatics program and senior students to direct their final project research. It is expected that further research will use more sample data so that the accuracy rate will be better and can be implemented in website or mobile-based applications.

Membangun Konsep Teknis Aplikasi dan Pemanfaatan Metode dalam Penulisan Tugas Akhir Fakultas Ilmu Komputer

Community service activities organized by LPPM Esa Unggul University are carried out using webinars. This activity is a means of sharing knowledge for students of the Faculty of Computer Science regarding final assignments. The Final Assignment is a routine activity at the end of the semester carried out by students and their supervisors at the beginning of the preparation stage. Support for the final project concept can provide opportunities for students with their supervisors to hold discussions to find solutions to the problems of the research topics to be taken. In this abdimas scientific forum webinar, it was held to build concepts and technical applications in writing the final project for students of the Faculty of Computer Science. The result of this community service is to provide an overview of computer science faculty students in building concepts both in terms of application, methodology and writing procedures that are useful for preparing the final project. The Webinar presented several techniques and practices in making applications including: Introduction to Mobile Application Concepts and Methods, Data Management with Machine Learning, Compilation of Engineering Requirements and Creating Websites using the Code Igniter (CI) Framework. From the webinar material, it can help students explore topics and final project research concepts that will be carried out by students during the preparation of the Final Project.

Instruction Modality and Writing Intensive Undergraduate Research Success: A Case Study

This paper explores if, and to what extent, shifting instruction modality influenced student learning outcome success in a writing intensive undergraduate course when COVID-19 shifted the method of the course’s delivery. With consistency in the instructor of record and writing prompt, the present study isolated and evaluated variability across student performance as assessed by final research project grades produced by the instructor, and assessment scores by two independent evaluators. Results show that instruction modality is associated with student performance. Students enrolled during the transitioning 2020 period earned lower grades on their final project as assessed by the instructor of record than students did in other course modalities. Additionally, these students performed lower in the areas of comprehension and citation. Students enrolled in 2021 hybrid class performed objectively lower, with lower scores on their final project and in the domains of clarity, comprehension, courtesy, cleverness, and citation in comparison to their pre-COVID-19 2019 face-to-face peers. Writing intensive capstone courses require faculty to work closely with students; students are more focused and attentive to improving the quality of their research papers and perfect their writing when faculty provide individualized attention to students in a face-to-face teaching modality.

Comparison of Fine Aggregate to Mortar Strength Between Sand Awang Bangkal and Sand Barito

The progress of building construction that is developing in our country affects the number of diverse building functions resulting in the quantity of buildings, the acceleration of the desired building and the demand for higher quality construction. Mortar is a mixture consisting of Cement, Fine Aggregate and Water. The adhesive in the mortar can be in the form of clay, lime, or cement. Fine Aggregate (Sand) in the mortar mix serves as a filler (glued material) either in a hardened or unhardened state. This final project research was conducted at the Structure and Materials Laboratory of the Banjarmasin State Polytechnic. Data collection was carried out by the method used to collect, study and collect data or sources related to the topic raised in a study. Studies can be obtained from various sources, such as journals, papers, reports, documentation books, internet (browsing) and libraries. The results of the compressive strength on the age of mortar At the age of 3 days Semen Gresik Pasir Barito is 6.05 Mpa, At the age of 7 days Semen Gresik Pasir Barito is 6.05 Mpa, At the age of 14 days Semen Gresik Pasir Awang Bangkal is 8.66 Mpa, At the age of 28 days Semen Gresik sand Awang Bangkal 10.68 MPa. It can be concluded that Pasir Barito is included in zone IV and Pasir Awang Bangkal is included in zone II. Based on the results of the average compressive strength of the mortar, the results obtained were: Barito sand at the age of 3 days was 6.05 Mpa, at 7 days old was 6.05 Mpa, aged 14 days was 7.68 Mpa, and aged 28 days was 9.56 Mpa, Pasir Awang Bangkal at the age of 3 days was 4.14 Mpa, the age of 7 days was 4.75 Mpa, the age of 14 days was 8.66 Mpa, and the age of 28 days was 10.68 Mpa.

Analisis Triple Helix Peran Stakeholder Dalam Meningkatkan Penggunaan Motor Listrik Di Indonesia

In this modern era, the use of electric vehicles is not a new thing. The grand strategy of energy national (GSEN) has fourteen strategic programs to be implemented, one of them is increasing the use of battery- electric vehicles motorized, in order to reduce the imports of fuel oil (BBM) and LPG as well as equitable electrification in Indonesia. This program needs to support by cooperation and role contribution from participants (stakeholders). This study was conducted to determine the role of stakeholders to increasing the use of electric motors in Indonesia using a triple helix methode. The data collection was carried out through interviews and documentation studies. The analyze data was use miles and hubberman. The results showed that based on the triple helix analysis, there were 3 stakeholders involved to increasing the use of electric motors in Indonesia. There were universities, industry and government. The universities have a role in conducting research and development for electric motor products, this can be done through final project research or providing research grants the development electric motors topic. The industry has a role in producing electric motors, for example Gesit Companies which produces electric motors, and also raw materials industry and spare part industry as well as component of electric motors. The government has a role in regulations through policies of equitable electrification motor vehicles in Indonesia. One of them is from the Minister of Transportation Regulation (Permenhub) Number 65 of 2020 concerning the conversion of fuel motorcycles into battery-electric motorcycles.

WORKSHOP METODE PENELITIAN TUGAS AKHIR MAHASISWA BIDANG TEKNOLOGI FARMASI DI MASA PANDEMI COVID 19 UNTUK MENGHASILKAN KUALITAS PENELITIAN YANG BAIK

The spread of Covid-19 has had many impacts in various sectors, one of which is the education sector. Currently, many activities in educational institutions are limited or even stopped. SStudents’final research is also affected since students’ target and desire to obtain maximum results were hindered by Covid-19 which limited them to using laboratories and libraries. The objective of this research is to help students complete their final assignments effectively and to improve the quality of their final project research during the pandemic. It employed the lecture and Q&amp;A methods. Evaluation was carried out by conducting needs analysis and then reporting the results of the data analysis. The results obtained include: 1) final year students already have knowledge related to the equalization of perception of scientific paper and technique of writing scientific paper in pharmaceutical technology, 2) students know the target of completing the cientific paper.

Implementation of Serverless Internet of Things Architecture in Cold Chain Monitoring

With the current technological developments, the need for monitoring in cold chain logistics as well as the problem of limitations on IoT devices such as data storage and computing capabilities can be handled with the help of cloud technology. Cloud has a concept called serverless. In this study, researchers tried to examine serverless services that can be integrated with IoT devices. The IoT devices used consist of nodes and gateways. In this final project research, testing and analysis of gateway devices and serverless architecture are carried out. NodeMCU which is part of the gateway device and AWS IoT as a serverless service will be integrated in this research. The serverless architecture system that was built also has a function to store data and send notifications to the user. Meanwhile, data monitoring will be carried out through Grafana. The results of AWS IoT performance testing when integrated with IoT gateway devices through QoS testing according to the TIPHON standard are categorized as satisfactory and the implemented system functions as expected.

Saddle Strength Analysis on Jacket Structure During Roll Up Procedures in Fabrication Phase

Offshore platform is a structure that serves as a well drilling facility to explore, extract, store and process petroleum and gas located under the seabed. There are several phases in the construction of offshore structures (fixed jacket platform) from preparation to construction. Fabrication phase is the earliest stage in the manufacture of a fixed offshore platform (jacket structure) which is carried out by the fabricator. One of the procedures at the fabrication phase is roll up procedure. In this final project research, an analysis will be carried out regarding the configuration of the rigging, crane, and sadle support used in the jacket structure during roll up procedure. After the analysis of jacket structure modeling using the SACS software, the results of rigging configuration can be obtained, which were the slings spesifications used to connect the structure with cranes, with sling diameter of 2.75 inch and SWL value of 64 MT. As for the sling used to connect the jacket with winch has a diameter of 1.5 inch snd SWL value of 18 MT. Furthermore, the cranes used have a capacity of 75 and 78 MT, respectively. In the load analysis of the jacket structure, it was found that saddle support received the largest reaction when the jacket was at an 80-degree slope with the largest reaction value of 102.74 MT. In the saddle support local analysis, the result of maximum equivalent von-mises stress obtained was 43,486 MPa, with the saddle allowable stress of 345 Mpa, therefore the UC value of 0.24 can be obtained.

Analisis Strategi Pemasaran Daily Routine Coffee Bandung

Analisis Strategi Pemasaran Daily Routine Coffee Bandung

Recommendation System to Propose Final Project Supervisors using Cosine Similarity Matrix

The selection of a supervisor is an important thing and one of the determinants of whether or not a student's final project research is successful. At the location of this research, students select a supervisor by considering his academic records, and recommendations from classmates or seniors. Words of mouth dominate their motivation, and many students do not have a basis for their choice. Selection of the fit supervisor has a significant impact on students' progression. Students will be more enthusiastic about doing the final project and may get facilitation in their research because the topics of students' projects match supervisors' interests and ongoing works. This study aims to make a recommendation system that suggests a supervisor for a student. The student fills in the title, abstract, and keywords of his proposal. The application proposes a prospective supervisor by calculating the similarity of the data with titles, abstracts, and keywords of published articles found in Google Scholar. This recommendation system uses the content-based filtering method to produce a list of recommendations. The cosine similarity algorithm calculates how similar the topic proposed by students is to the lecturer's interests. In building a website-based recommendation system, the author uses two Django web frameworks as the backend and ReactJs as the frontend. The system is successful in suggesting final project supervisors that have matched interest and expertise with students' proposals.

Analysis of Diphtery Disease Mortality In Indonesia Using Zero Inflated Conway Maxwell Poisson Regression Model

Diphtheria is an upper respiratory tract disease caused by the bacteria Corynebacterium Diphtheriae. Diphtheria is a dangerous infectious disease, because there were 23 deaths from 529 cases in 2019. The data used in this final project research is secondary data taken from the Health Office in 2019. The number of deaths of diphtheria patients is calculated data and the assumption is distributed as a Poisson distribution. . The number of zero data of 73.5 percent indicates an overdispersion of the response variables. One of the conditions of Poisson Regression is that it requires equality between the mean and variance, this model is not appropriate to be applied to the dispersion below and above. The Zero Inflated Conway Maxwel Poisson (ZICMP) regression model can be an alternative because it is flexible for under- and over-dispersion data and can solve the problem of excess zero values in the response variable. In this study, ZICMP was applied to mortality cases in diphtheria patients in Indonesia. This study aims to examine the probability function and develop an algorithm to estimate ZICMP parameters and apply the ZICMP model to mortality cases in diphtheria patients. The Maximum Likelihood Estimation (MLE) method is used to estimate the parameters in ZICMP and the probability function is maximized using the Expectation-Maximization (EM) algorithm.

PERANCANGAN PERBAIKAN PROGRAM KOMUNIKASI PEMASARAN RIHIJAB MENGGUNAKAN METODE BENCHMARKING DAN TOOL ANALYTICAL HIERARCHY PROCESS

Rihijab is one of the Micro, Small and Medium Enterprises (MSMEs) located in Central Java and is engaged in the fashion sector. Rihijab focuses its business on producing and selling hijabs for women with an age range of 16 to 40 years. Rihijab has a problem regarding unstable sales, this is supported by the acquisition of sales data from November 2020 to December 2021 which fluctuates and tends to not meet the sales targets determined every month. Rihijab has implemented seven of the eight marketing communication mixes which have not been implemented optimally. This resulted in problems regarding the lack of public awareness of Rihijab which can be proven by the low number of Instagram followers when compared to its competitors. This final project research aims to design a marketing communication improvement using the benchmarking method and the analytical hierarchy process (AHP) tool. Benchmarking method will be used to determine the best marketing communication that has been implemented by competitors so that it can be used as a reference in improving Rihijab's marketing communication program. The analytical hierarchy process (AHP) tool will be used to find out which competitors are selected as Rihijab's benchmark partners. Based on the results of data processing obtained 14 attributes that are used as a reference in designing an integrated system for improving marketing communication programs at Rihijab.&#x0D; &#x0D; Keywords: Marketing Communication Program, Benchmarking Method, Tool analytical hierarchy process

Analysis of Business Development Services in Improving Taxpayer Compliance of Micro, Small and Medium Enterprises

This study aims to analyze the role of implementing business development services (BDS) to improve the tax compliance of MSME taxpayers. To do this, a qualitative approach with the Library Research method is used. Data is collected by reviewing journals, conference publications, books, and other sources related to the research problem, such as news from credible sources, as well as final project research from another relevant research. The results of the study show that Business Development Services (BDS) is a form of business development services that facilitates MSME actors to grow. In Indonesia, the Director General of Taxes uses this program to encourage tax compliance by integrating it with tax socialization. This program then provides various event platforms that increase tax knowledge and perceptions of tax justice. The implication for the Tax Office is to be able to develop a BDS program that is as attractive as possible for MSMEs. This study provides originality as the first qualitative study to investigate the effect of BDS on tax compliance.

An exploratory study of deferred prosecution agreements and the adjudication of corporate crime

An exploratory study of deferred prosecution agreements and the adjudication of corporate crime

Navigating pedagogical challenges through authentic pedagogy during the transition to online learning amid COVID-19

COVID-19 has required a significant and abrupt shift in the way we teach and learn in the field of Higher Education (HE). This paper explores an innovation in pedagogy in HE as lecturers and students transition from learning on campus to learning online. The transition to online learning, in this context, is problematised within the broader context of digital exclusion and the significance of foregrounding students' needs. The reflections presented in this paper derive from a re-envisioned undergraduate final year research project module delivered to a large diverse cohort of students (100+). In this module we applied premises underpinning authentic pedagogy, bringing the challenges faced by learners to the foreground whilst privileging student agency, autonomy, and competency. An element of the module previously delivered through in-person group supervisions was reconfigured into one-hour online workshops structured through a cycle of opportunities for participation. In our reflections we identify that students' agency, the promotion of social int eraction, and continuity in pedagogy were key elements in enabling the formation of a community of learning.