Film-forming Research Articles

Investigation of nitrogen fixation activity soybeans plants by mineral fertilizers foliar treatment

The results of the study of nitrogen-fixing activity during foliar treatment of vegetative soybean plants with liquid mineral fertilizers containing macro-microelements in various forms in the foothill zone of Kabardino-Balkaria are presented. The object of research is the early ripe soybean variety SK Veda. The soil of the experimental plot is a leached, medium-thick, low-humus, heavy loamy chernozem on carbonate clays, with a humus content in the arable layer of 3.1 %, pHkcl 5.0, mobile phosphorus 7.5 and exchangeable potassium 8.0 mg/100 g of soil. Encrustation of soybean seeds was carried out using a specific film-forming agent based on soybean phosphatides with the inoculant Nitrofix. The results of studies for 2020-2022 are given. with an assessment of the dynamics of the formation of the symbiotic apparatus by the number of nodules (pcs/m2) and by the mass of nodules (g/m2) in ontogeny of the macrosymbiont. The peak of nodule formation in soybean plants of the SK Veda variety fell on the flowering phase. The highest nodulation rates were noted in the control variant: in 2020 - 306 pcs/m2; in 2021 - 408 pcs/m2; in 2022 - 96 pcs/m2. It has been shown that foliar treatment of soybean plants with nutrient deficiency correctors has an impact on nodulation rates, with differences being noted depending on the treatment time. In the variant of Polydon NPK treatment in the primordial leaf phase, the nodulation parameters were minimal in the experiment over the years of the study (86; 216; 56 pcs/m2). Treatment of SK Veda soybean plants in the primordial leaf phase with molybdenum-containing fertilizers ensures the formation of larger nodules. The values of the nodule weight in the flowering phase in the variant of the treatment of Polydon plants with molybdenum in the primordial leaf phase increased by 1.56; 2.09; 1.11 times, respectively, for 2020, 2021, 2022. Nitrogenase activity averaged 26.4-281.6 µg N2/plant.h over the years of the study hour. In the control (inoculation with nitrogen-fixing microorganisms), the activity of nitrogenase was 208.3 µg N2/plant.h. Inoculation of soybean seeds with nitrogen-fixing microorganisms and foliar treatment of plants with Polydon molybdenum increased nitrogenase activity by 35.2-19.1 % and increased protein content by 5.0-3.9 % relative to control, depending on the treatment phase.

Preparation and Characterization of PHBV/PCL-Diol Blend Films.

Biodegradable thin films based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(caprolactone diol) (PCL-diol) blend were developed using the solution casting method. PHBV is biodegradable, biocompatible, and produced naturally by bacterial activity, but its use is restricted by high crystallinity and low resistance to thermal degradation with melting temperatures close to degradation thus narrowing the processing window. Solution casting was chosen as a cost-effective method reducing energy consumption and avoiding thermal degradation during processing. The increase in PCL-diol in blend composition (40-60 wt%) enhances the film-forming ability of PHBV and the wettability along with the decrease in the roughness of the resulting materials as revealed by contact angle measurements, scanning electron microscopy (SEM), and atomic force microscopy (AFM). Optimal composition in terms of filmogenity and surface structure has been achieved by the addition of PCL-diol in the amount of 60 wt%. FTIR confirmed the expected chemical structures with no evidence of chemical interactions between the two polymers.

Effect of the Molecular Weight of Polyelectrolyte and Surfactant Chain Length on the Solid-Phase Molecular Self-Assembly.

Solid-phase molecular self-assembly (SPMSA) is emerging as an efficient approach, leading to scale-span self-assembled supramolecular films. With SPMSA, freestanding macroscopic supramolecular films can be formed upon mechanically pressing the precipitates formed with polyelectrolytes and oppositely charged surfactants. Herein, we report that the film formation ability and the mechanical strength of the resultant film depend highly on the surfactant chain lengths and the molecular weight of polyelectrolytes. A coarse-grained molecular dynamics study revealed that the longer surfactant chains are beneficial for the ordered assembly of surfactant bilayers in the film, whereas the larger molecular weight of PE favors the enhanced mechanical strength of the film by promoting the long-range order of the surfactant bilayers. The current results disclosed the physical insight of the surfactant chain length and the molecular weight of polyelectrolytes into the film structure and mechanical strength, which is of practical importance in guiding the creation of SPMSA materials.

Fabrication of multi-functional biodegradable liquid mulch utilizing xyloglucan derived from tamarind waste for agricultural application

Biodegradable liquid mulch is considered a promising alternative to plastic mulch for sustainable agriculture. This work proposed a xyloglucan-based liquid mulch with multi-function using a combination of chemical modification and blending methods. The esterification product of tamarind xyloglucan (TXG) from forestry wastes was synthesized with benzoic anhydride (BA). The effect of esterification modification was investigated, and BA-TXG was utilized as a film-forming and sand-fixation agent. The rheological properties, thermal stability, and hydrophobicity were improved following esterification. Additionally, waterborne polyurethane and urea were incorporated into the mulch to enhance its mechanical strength (23.28 MPa, 80.71 %), and homogeneity, as well as improve its nutritive properties. The xyloglucan-based liquid mulch has excellent UV protection, a high haze value (approximately 90 %), and retains water at a rate of 80.45 %. SEM and immersion experiment showed the effect of xyloglucan-based liquid mulch on sustainable sand-fixation. Moreover, the liquid mulch treatment demonstrated an impressive germination rate of 83.8 % and degradation rate of 51.59 % (60 days). The modified polysaccharide film increases stability and slows down the degradation rate. Tamarind xyloglucan-based liquid mulch exhibits powerful and diverse optical properties as well as sand fixation functions, indicating their great potential in sustainable agriculture as an alternative to plastic mulch.

DESIGNING OF A NEW HARDWARE AND TECHNOLOGICAL SCHEME OF THE PROCESS OF ORGANIC SUBSTANCES MIXTURES SULPHING

The article states that surfactants based on higher alcohols fr. C12 - C14 are mainly used in a wide range of personal hygiene products, such as shampoos, foaming agents for baths, toothpastes, dishwashing liquid, and delicate laundry detergents. The use of surfactants based on a mixture of higher alcohols fr. C12 - C14 and monoethanolamides of higher fatty acids of coconut oil makes it possible to significantly improve the quality characteristics of personal hygiene products. It is stated that the main element of the apparatus and technological scheme of the sulfation process of mixtures of organic substances is a tubular film absorber. It is shown that for the sulfation of two-component mixtures of organic substances based on higher alcohols fr. C12 - C14 and monoethanolamides of higher fatty acids of coconut oil must use a tubular film absorber, which has two-stage cooling - the upper part 1/3 of the length of the absorber, the lower part 2/3 of the length of the absorber. The speed of the gasair flow is maintained at Vg = 20 m/s, the molar ratio of reagents is 1.08 : 1.0, the concentration of sulfur trioxide in the gas-air flow is 3.7% vol., the temperature of the initial reactants: liquid phase is 313 K, gas-air flow is 303 K, cooling water - 293 K. Based on such initial data, an industrial tubular absorber was calculated. The data of such a calculation are given. It is stated that the calculation of the industrial tubular film absorber was carried out according to the developed algorithm and program in the MatLab language, the iterative method of calculation was used in the program. The calculation of the number of pipes of an industrial absorber is given. It is shown that the absorber consists of the following main elements - an upper elliptical cover, a gas-air flow distribution plate, a chamber for distributing a mixture of organic substances, film formers, two cooling chambers, and a lower elliptical cover. It is stated that on the basis of an industrial tubular film absorber, a new equipment and technological scheme has been designed and presented. The main technical, economic and environmental indicators of the implementation of such a hardware and technological scheme are presented.

A donor-acceptor-type photoactive material based cathode molecularly imprinted photoelectrochemical sensor for luteolin

Developing new optoelectronic materials is the eternal pursuit and key strategy for building high-performance photoelectrochemical sensors. In this work, a novel organic polymer film containing D-A unit was firstly in-situ electro-synthesized on ZnS/rGO surface by using 9,9′-(9,9′-spirobi[fluorene]−2,7-diyl)-bis-9 H-carbazole (SFC) and carbazole as functional monomers. The micromorphology, element composition, structure, photoelectric efficiency and recognition ability of the key component and/or the sensing composite were investigated by SEM, XPS, XRD and transient photocurrent spectra, and the possible mechanism of charge carrier separation and transmission was proposed. Owing to the good light absorption ability, excellent film formation and imprinting ability, effective electrons-holes separation path, and satisfactory application stability, the prepared photoelectrochemical sensor exhibited good sensing performance for luteolin. Under the optimized conditions, the photocurrent intensity of the sensor showed a good linear relationship with the logarithmic concentration of luteolin from 0.001 μmol L−1 to 2 μmol L−1, with a detection limit of 0.35 nmol L−1 (S/N = 3). When applied in actual samples including carrot, peanut shells and chrysanthemum tea, highly consistent results with classical HPLC method were obtained. This work provided a new photoelectrochemical approach for the highly selective and sensitive detection of small molecules besides luteolin.

Film Formers Based on Plant Raw Materials for Polyurethane Coatings: A Review

Film Formers Based on Plant Raw Materials for Polyurethane Coatings: A Review

Effect of carboxymethyl cellulose addition on the characteristic of chitosan-based bioplastic

Bioplastic is an alternative solution in solving the problem of the plastic waste accumulation. Chitosan is a marine product waste from the crustacean group that can be used as a raw material for bioplastic because of its good film-forming ability. However, the bioplastic from chitosan has the property of being easily broken, so another material is added, namely carboxymethyl cellulose (CMC), that increase the bond’s compactness. This study aims to determine the effect of the addition of CMC on the characteristics of bioplastic made from 2% chitosan and 0.5% glycerol with a volume ratio of 10:1 chitosan:CMC. The experimental design used was a completely randomized design (CRD) with the addition of CMC (0%, 0.25%, 0.5%, 0.75% and 1%). The characteristics of the bioplastic tested in this study included film thickness, density, water content, solubility, tensile strength, elongation, antibacterial activity, and functional group analysis. The addition of 0.5% CMC resulted the bioplastic with a film thickness of 0.072 mm, the density of 0.836 g/cm3, the water content of 16.99%, the solubility of 40.5%, the tensile strength of 12.83 MPa, the elongation of 41.76%, inhibition zone of the antibacterial activity of 2.83 mm and a new group is formed in film that was made.

Significantly improve film formability of acetylated xylans by structure optimization and solvent screening

Acetylated xylans have great potential in fabricating functional film and coating materials, which need a good solubility/dispersibility and film formability in an easily evaporable solvent. However, the changes of film formability with degree of substitution by acetyls (DSAc) in different solvent systems for xylans have not been extensively studied, which limit the application of acetylated xylans in film materials. In this study, acetylated xylans with DSAc of 0–2 were prepared and the effects of acetyl groups on solubility/dispersibility, crystallinity and film formability of xylans in water and chloroform solvent systems were investigated. Due to the change of polarity, xylans with DSAc of 0–0.62 are only soluble in water solvents, while xylans with DSAc of 1.13–2 are only soluble in chloroform/ethanol (70/30 v/v) organic solvents. We have found that the film formability of acetylated xylans is highly related to their solubility and crystallization. Film formable xylans all had good solubility in the cast solvents. However, although with good solubility, xylans with DSAc of 0–0.3 and DSAc of 1.76–2 cannot form intact films, which is due to the forming of xylan hydrate crystals and xylan diacetate crystals. With the increase of DSAc, the mechanical property of xylan film increases initially at low DSAc and decreases at high DSAc. This study provides theoretical basis for applying xylans and their derivatives in advanced functional film and coating materials with great biocompatibility and biodegradability.

Physico-Chemical Properties of Collagen Hydrolysates and Their Application in Skin Care Cosmetics

Collagen is a biodegradable polymer with many beneficial properties, such as high biocompatibility with skin, excellent film-forming ability, antimicrobial and antioxidant actions, etc. It has received increasing attention in various research and practical fields for its potential applications. However, the use of collagen can be problematic due to its high molecular weight, which can be resolved by hydrolysis into smaller polypeptides. Efforts have also been made to find alternative sources of collagen and its hydrolysates. One such promising source is poultry by-products rich in type I collagen, the most important collagen for practical use. This article analyzes the physico-chemical properties of collagen hydrolysates isolated from the superficial soft tissues of chicken paws. The results obtained show that the use of Neutrase yields a hydrolysate that exhibits greater surface activity at the liquid-gas interface, enhanced wetting ability, and better adhesion to hydrophobic surfaces. Therefore, it can be recommended as a multifunctional ingredient for skin care cosmetics. A cream formula with collagen hydrolysate was developed. Cream is characterized as a multiple emulsion with a moisturizing effect.

Carboxymethyl Cellulose-Amuniacum Gum Based Edible Films Enriched with Clove Essential Oil: Optimization Formulation Using Response Surface Methodology (RSM)

Backgraound: Polysaccharides, particularly Carboxymethyl Cellulose (CMC) and Ammoniacum Gum (AMG), are considered valuable due to their thermal stability and non-toxicity. CMC has good film-forming ability but weak mechanical properties, while AMG shows promise with its unique chemical composition. Additionally, essential oils, such as Clove Essential Oil (CEO), are being used to enhance the antimicrobial properties of edible films, offering a natural way to extend the shelf life of food products.
 Methods: This study investigated the combined effect of CMC: 0.5-1.5 wt %, AMG: 1-5 wt %, as well as CEO: 0-30 v/v % on the physical characteristics of the CMC-AMG films by Response Surface Methodology. The optimization was performed with the aim of maximizing Whiteness Index, Ultimate Tensile Strength (UTS), and Strain at Break (SB) and minimizing total color difference (ΔE) values. Fourier-Transform Infrared Spectroscopy, film microstructure, Differential Scanning Calorimeter analysis, and antibacterial activity were investigated. The analysis was conducted using Design Expert software version 10.00 (STAT-EASE Inc., Minneapolis, USA).
 Result: The films with the highest UTS have been obtained through a composition of 5 g CMC, 1.5 g AMG, and 15% CEO. On the contrary, using a composition of 5 g CMC, 1 g AMG, and 30% CEO revealed the highest SB (115.41%). The highest UTS value of 13.17 MPa was obtained with a formulation consisting of 5% AMG, 1.5% CMC, and 15% CEO. Nevertheless, the maximum SB value of 115.41% was achieved with a formulation containing 5% AMG, 1% CMC, and 30% CEO. Moreover, heterogeneous microstructure and more opaque films were obtained as identified by the higher ΔE. The Differential Scanning Calorimeter results demonstrated that incorporating a CEO did not impinge on thermal stability. Furthermore, the addition of CEO led to a rise in antimicrobial activity against Salmonella enterica, Pseudomonas fluorescens, Escherichia coli, and Listeria monocytogenes.
 Conclusion: In conclusion, combination of CMC and AMG in optimum levels, led to the production of a film with acceptable mechanical properties. Also, these films showed significant antimicrobial activity.

Friction study of honey-water in a mimicked soft oral environment

Food oral tribology plays an important role in studying the oral processing behavior of foods. This article explores the lubricity of different mass fractions of honey-water solutions (HWS) combining experimental and simulation study. Friction experiments are performed in simulated soft oral environment, and the complete Stribeck curve is successfully constructed. It is found that as the mass fractions of honey increase, the friction coefficients decrease and the curves move towards higher Vη (speed × viscosity) values. Higher viscosity and wettability enhance the film-forming and entrainment ability of the fluid, while reducing the friction coefficients in the boundary and mixed regimes. However, changes in wettability have little impact on the elastohydrodynamic lubrication regime of pure honey. In addition, a lubrication model is established using finite element method to examine the fluid movement in the lubrication area. The distribution of lubrication film exhibits a horseshoe shape. Influences of the sliding speed, fluid viscosity, and solid viscoelasticity on the distribution of fluid pressure and film thickness are revealed. This study provides guidance for exploring the oral processing behavior of fluid foods and improving the pleasure of eating.

Exfoliation and physico-chemical characterization of novel bioplasticizers from Nelumbo nucifera leaf for biofilm application

Due to the extreme threats as environmental and health issues caused by the petroleum-based leachable plasticizers, researchers among different domains are more interested in finding unique biodegradable plasticizers from natural sources. The present study used Nelumbo nucifera leaf to extract novel biopolymers as viable substitutes for chemical plasticizers. The biopolymers extraction was carried out through chemical means and its physico-chemical and morphological characterization were carried out to confirm its plastic nature. The polymers extracted possess a low glass transition temperature (77.17 °C), good thermal stability (230 °C), low density (0.94 g/cc), good surface roughness (34.154 μm), low crystallinity index (25.1%) and moderate crystallite size (16.36 nm). The presence of an organic polymer with specific chemical groups as olefinic alkenes, epoxide, imino/azo groups, and hydrophobic organic siloxane groups, signify that the material is a condensed phenolic derivative. Furthermore, bio-film was formulated using NLP and poly lactic acid (PLA) matrix to evaluate its plasticizing effect and film-forming ability. Variation in specific properties of film was noted after bio-plasticizer addition, where tensile strength (20.94 ± 1.5 MPa to 19.22 ± 1.3 MPa) and Young's modulus (1.462 ± 0.43 GPa to 1.025 ± 0.52 GPa) was found to be decreased whereas increased the percentage of elongation at break (26.30 ± 1.1% to 39.64 ± 1.6%). In addition, decreased glass transition temperature (Tg) (59.17 °C), good surface compatibility, and increased flexibility of NLP-PLA film in contrast to pure PLA film authorizes the plasticizing effect of bio-plasticizers on PLA. Since the extracted bio-plasticizers could be a suitable replacement to harmful synthetic plasticizers for lightweight packaging applications in bioplastics sector.

Blue polyimides for high-performance solution-processable organic light-emitting diodes

Blue light-emitting materials with excellent film-forming ability, superior morphological stability, outstanding color purity, and high device efficiency are in urgent demand for new-generation display and solid-state lighting devices fabricated by low-cost wet processing. However, their current performances are far from satisfactory. Herein, two polyimide (PI)-based blue polymers are first precisely constructed and synthesized through a “Hinge-type Linking” strategy. A small molecular is introduced into the PI backbone via non-conjugated aliphatic imide ring linker. These polymers not only show superb thermal stability and morphological stability, but also maintain narrowband blue emission. Furthermore, PIs are prepared by polycondensation method, precipitated and purified in ethanol solvent, which avoids the use of metal catalysts. The resulting solution-processable devices achieve high performance with a maximum external quantum efficiency (EQE) of 9.94 % and maximum emission peak at 460 nm. To the best of our knowledge, this is the first time that solution-processable polymer light-emitting diodes (PLEDs) based on the “hot exciton” mechanism achieving splendid performance with maximum EQE close to 10 %. The superior performance is attributed to the validity of the “Hinge-type Linking” strategy in PLEDs, opening up a new avenue for PLED development and application.

The optimization of the electrolyte for low temperature LiFePO4-graphite battery

The design of electrolyte is crucial to improve the low temperature electrochemical performance of the LiFePO4-graphite battery. In this paper, by optimizing the solvent composition and introducing film-forming additives in the electrolyte, the low temperature performance of the battery is significantly improved. In detail, the EP (ethyl propionate) solvent with low melting point and low viscosity is added to the original EC (ethylene carbonate)-EMC (ethyl methyl carbonate)-DMC (dimethyl carbonate) solvent systems, which improved the ionic conductivity of the electrolyte, especially at low temperature (−40 °C). On the other hand, the introduction of FEC (fluoroethylene carbonate)/DTD (ethylene sulfate) film-forming agents promotes the formation of SEI (solid electrolyte interface) film, and the SEI is thin and uniform. As a result, the LiFePO4-graphite battery exhibits high capacity and long cycle life under low temperature conditions.

Per- and polyfluoroalkyl substance (PFAS) removal from soil washing water by coagulation and flocculation

Soil washing is currently attracting attention as a promising remediation strategy for land contaminated with per- and polyfluoroalkyl substances (PFAS). In the soil washing process, the contaminant is transferred from the soil into the liquid phase, producing a PFAS contaminated process water. One way to treat such process water is to use coagulation and flocculation; however, few studies are available on the performance of coagulation and flocculation for removing PFAS from such process water. This study evaluated 6 coagulants and flocculants (polyaluminium chloride (PACl), zirconium oxychloride octahydrate, cationic and anionic polyacrylamide, Polyclay 685 and Perfluor Ad®), for the treatment of a proxy PFAS contaminated washing water, spiked with PFAS concentrations found at typical Aqueous Film Forming Foam (AFFF) contaminated sites. PFAS removal efficiencies (at constant pH) varied greatly depending on the coagulants and flocculants, as well as the dosage used and the targeted PFAS. All tested coagulants and flocculants reduced the turbidity by >95%, depending on the dosage. Perfluor Ad®, a specially designed coagulant, showed the highest removal efficiency for all longer chain (>99%) and shorter chain PFAS (>68%). The cationic polyacrylamide polymer removed longer chain PFAS up to an average of 80%, whereas average shorter chain PFAS removal was lower (<30%). The two metal-based coagulants tested, PACl and zirconium, removed longer chain PFAS by up to an average of 61% and shorter chain PFAS up to 48%. Polyclay 685, a mixture of powdered activated carbon (PAC) and aluminium sulphate, removed longer chain PFAS by 90% and shorter chain PFAS on average by 76%, when very high dosages of the coagulant were used (2,000 mg/L). PFAS removal efficiencies correlated with chain length and headgroup. Shorter chain PFAS removal was dependent on electrostatic interaction with the precipitating flocs, whereas for longer chain PFAS, hydrophobic interactions between apolar functional groups and flocs created by the coagulant/flocculant, dissolved organic matter and suspended solids played a major role. The results of this study showed that by selecting the most efficient coagulant and aqueous conditions, a greater amount of PFAS can be removed from process waters in soil washing facilities, and thus included as part of various treatment trains.

Coupling nano-redox carbon dots with nontraditional AIE-polysaccharides on a smart fabric for healthcare sensing systems

Creating bio-based fluorescent probes with visual-sensing abilities and anti-infection performance is highly desirable but remains challenging. Herein, a multifunctional dual-responsive biopolymeric nanocoating has been designed with synergistically enhanced fluorescent and antibacterial properties that simply implemented by the combination of tannic acid rooted carbon dots (TN, redox-sensitive) and alginate-zinc complex (SA-Zn, ionic-sensitive) possessing the aggregation-induced emission (AIE) characteristics. The mussel-inspired catechol groups and alginate-metal aggregates afford great film-forming abilities on diverse substrates while the entrapped TN enable manipulation of the redox-dependent fluorescent and antibacterial properties via generating reactive free radicals (ROS). The concept of facile pre-sensing and treatment towards in-home sensing application has been perfectly realized on a commercial fabric wipe, demonstrating excellent detection capabilities for biological molecules (e.g., H2O2 and metal cations) and synergistically enhanced antibacterial performance. Therefore, bridging the nano-redox carbon dots with nontraditional luminescent polysaccharides can provide enormous potential into advanced fluorescent materials for emerging healthcare applications.

IN VITRO AND IN VIVO EVALUATION OF EZETIMIBE FAST-DISSOLVING FILMS

Objective: The goal of this investigation was to develop and evaluate Ezetimibe fast-dissolving films, which are used to treat hyperlipidemia and prevent cholesterol absorption. Methods: The fast-dissolving Ezetimibe films were developed using the solvent casting method and included the following ingredients sodium carboxy methyl cellulose, HPMC E5, Polyvinyl Alcohol, Polyvinyl pyrrolidone which act as film-forming agents polyethylene glycol 600 and sodium starch glycolate, which acts as a superdisintegrant and plasticizer;, citric acid and stevia powder, which serves as a saliva stimulant and sweetener. Results: The fast-dissolving films of Ezetimibe prepared with PVP K30 released the drug up to 99.87% within 5 min, which showed the increased solubility, dissolution rate, flexibility and tensile strength of the films when compared to formulation prepared with sodium carboxy methyl cellulose, HPMC E5, Polyvinyl Alcohol. The FTIR and DSC studies were conducted for pure drug, polymers and optimized formulation E11, which indicated that were no incompatibilities found between the drug and polymers used in the present studies. Scanning electron microscopy analysis was performed for pure drug, and optimized formulation E11 showed that they were no surface fractures and cracks in the films. The optimized formulation E11 was subjected to in vivo studies by using New Zealand Rabbits, and accelerated stability studies revealed that all the formulation is stable. Conclusion: The current study reveals that fast-dissolving films formulated as a novel drug delivery technology can increase the solubility and dissolution rate of poorly water-soluble drug Ezetimibe.

Development and optimization of film forming non-pressurized liquid bandage for wound healing by Box-Behnken statistical design

The goal of the current investigation was to develop a non-pressurized liquid bandage to promote the healing of wounds by using silver sulfadiazine. A three-factor three level box-behnken statistical design was employed to optimize the drug-loaded liquid bandage. Film-forming liquid bandage was developed by using ethyl-cellulose, dibutyl sebacate, and glycerol. For optimization, ethyl cellulose, dibutyl sebacate, and isopropyl myristate were taken as independent variables while tensile strength, water vapor absorption value, and drying time were taken as dependent variables. The film-forming liquid bandage was evaluated for various parameters like tensile strength, water vapor absorption value, drying time, viscosity, pH, in-vitro drug release studies, in-vivo wound healing studies, and stability studies. The optimized formulation was found with the tensile strength of 68.24 ± 0.24 MPa, water vapor absorption value of 2.00 ± 0.25 %, drying time of 1.75 ± 0.14 min, viscosity of 60 ± 0.5 cPs, pH of 6.0 ± 0.5 and good physicochemical properties with satisfactory film-forming ability. The in-vitro study shows that the release of test formulations was better than the marketed formulation. After 6 h of study, the liquid bandage and marketed formulation showed 41.02 % and 29.32 % of drug release respectively. Significant results were obtained for the in-vivo wound healing studies. Upon comparison with the control group (2.61 mm) and marketed formulation (1.44 mm), rats treated with the optimized formulation exhibited a noticeable improvement in wound contraction (0.8 mm). The liquid bandage after three months of stability testing was found to be stable with optimum. The film-forming liquid bandage was found to be an effective alternative to conventional topical preparations as it develops a thin polymeric layer on the wound and the skin around it and improves comfort for the patient by protecting the wound from external factors and physical harm.

Novel Approach to Address Brownish Edge Band in Low Alloy Cold Rolled Steel Used in Tin Plate

Thin film formation of lubricant plays a key role in supporting lubrication and abating wear. During cold rolling of steel, esters, or film formers in rolling oil play an important role in the mixed lubrication regime. The property of the lubricant holds the key to achieving the mean film thickness during the mixed lubrication regimen. Band formation in cold rolling is often related to inadequate acid pickling. During cold rolling operation, the film formation between asperities plays an important role in controlling friction and coil temperatures. A well formulated lubricant ensures smooth transition of lubrication throughout the range of roll bite temperature and also across the lubrication regimes. A sudden spike in coefficient of friction (CoF) can often lead to increased wear and abnormal increase in coil temperatures resulting in band formation. The study highlights degradation of oil sample leading to the problem and the role of key lubricant properties in esters in mitigating the problem.