Irradiation Field Research Articles

A phase II study of plerixafor combined with whole brain radiation therapy (WBRT) for patients with newly diagnosed glioblastoma.

2075 Background: Plerixafor inhibits the binding of stromal cell-derived factor 1 (SDF-1a / CXCL12) to its receptor on CD11b+ monocytes, inhibiting vasculogenesis and tumor recurrence in preclinical models. An early phase trial demonstrated that Plerixafor administration decreased cerebral blood volume (CBV) within the irradiated field of glioblastoma patients, and that the majority of recurrences occurred outside of the irradiated field (Thomas R. et al, Clin Cancer Res). This follow up study investigates the efficacy of Plerixafor in combination with WBRT, with the hypothesis that widening the radiation therapy (RT) field with WBRT may reduce out-of-field tumor recurrence and improve survival. Methods: This was a Phase II, open-label, non-randomized, single-arm trial.Adults between 18-75 years old with newly diagnosed high grade glioma as defined by WHO 2016 criteria and KPS ≥ 60 were eligible for enrollment. Patients underwent maximal safe resection followed by 6 weeks of concurrent radiation therapy and temozolomide (TMZ). Of note, modifications to the conventional treatment paradigm included completing 30 Gy of standard intensity-modulated RT followed by 30 Gy of WBRT, as well as completing a 4-week continuous infusion of Plerixafor dosed at 400 µg/kg/day. Patients then started adjuvant TMZ after completing Plerixafor. Primary endpoint was 6-month progression free survival (PFS6) after chemoradiation. Secondary endpoints included median overall survival (mOS), adverse events (AEs), MRI-based patterns of recurrence, and neurocognitive outcomes measured by the Trail Making Test, Controlled Oral Word Association Test, and the Hopkins Verbal Learning Test. Additionally, maximum arterial spin labeling-cerebral blood flow (ASL-CBF) values of primary lesions were compared over various time points during the study. Results: 14 of 17 enrolled patients completed the Plerixafor infusion, and all 17 patients completed WBRT. Median age was 57 years. 15 patients (88.2%) were IDH wildtype and 13 patients (76.5%) were pMGMT unmethylated. 13 patients (76.5%) underwent gross total resection, 2 (11.8%) underwent subtotal resection, and 2 (11.8%) underwent biopsy only. The PFS6 was 91.7%. The mOS was 15.11 months. 3 patients discontinued Plerixafor early due to rash (n=1), rising creatinine (n=1), or worsening confusion and agitation (n=1). Common Gr2 treatment-related AEs included alopecia (n=4), nausea (n=4), and vomiting (n=2). 1 patient had Gr3 alopecia. There were no Grade 4/5 AEs. 80% of patients scored worse on their neurocognitive assessments at 6 months compared to screening. ASL-CBF values of primary lesions appeared relatively stable throughout the study. Conclusions: The combination of Plerixafor and WBRT did not improve mOS compared to the original study using focused RT only. There was an overall decline in neurocognitive performance over the course of the study. Clinical trial information: NCT03746080 .

Disease Control and Toxicity Outcomes after Stereotactic Ablative Radiation Therapy for Recurrent and/or Metastatic Cancers in Young-Adult and Pediatric Patients.

Pediatric patients with metastatic and/or recurrent solid tumors have poor survival outcomes despite standard-of-care systemic therapy. Stereotactic ablative radiation therapy (SABR) may improve tumor control. We report the outcomes with the use of SABR in our pediatric solid tumor population. This was a single-institutional study in patients < 30 years treated with SABR. The primary endpoint was local control (LC), while the secondary endpoints were progression-free survival (PFS), overall survival (OS), and toxicity. The survival analysis was performed using Kaplan-Meier estimates in R v4.2.3. In total, 48 patients receiving 135 SABR courses were included. The median age was 15.6 years (interquartile range, IQR 14-23 y) and the median follow-up was 18.1 months (IQR: 7.7-29.1). The median SABR dose was 30 Gy (IQR 25-35 Gy). The most common primary histologies were Ewing sarcoma (25%), rhabdomyosarcoma (17%), osteosarcoma (13%), and central nervous system (CNS) gliomas (13%). Furthermore, 57% of patients had oligometastatic disease (≤5 lesions) at the time of SABR. The one-year LC, PFS, and OS rates were 94%, 22%, and 70%, respectively. No grade 4 or higher toxicities were observed, while the rates of any grade 1, 2, and 3 toxicities were 11.8%, 3.7%, and 4.4%, respectively. Patients with oligometastatic disease, lung, or brain metastases and those who underwent surgery for a metastatic site had a significantly longer PFS. LC at 1-year was significantly higher for patients with a sarcoma histology (95.7% vs. 86.5%, p = 0.01) and for those who received a biological equivalent dose (BED10) > 48 Gy (100% vs. 91.2%, p = 0.001). SABR is well tolerated in pediatric patients with 1-year local failure and OS rates of <10% and 70%, respectively. Future studies evaluating SABR in combination with systemic therapy are needed to address progression outside of the irradiated field.

Radiation-induced Renal Artery Stenosis

We present a case of a 33 year old male presenting with uncontrolled hypertension, requiring four drugs and renal dysfunction. Investigations revealed calcific atherosclerosis of abdominal aorta and bilateral renal artery stenosis. He had received radiotherapy for abdominal Non-Hodgkin’s lymphoma 14 years ago. Transluminal angioplasty was done on the right side resulting in improved renal function and normalization of blood pressure. Radiotherapy for intra-abdominal malignancy induces atherosclerosis process in arteries within field of irradiation and they manifest after many years of the initial insult.

Photodynamic therapy of leukoplakia of the oral mucosa: experience of using method in 223 patients

The aim of this study was to analyze the immediate and long-term results of using photodynamic therapy (PDT) in patients with leukoplakia of the oral mucosa. The retrospective study included 223 patients with morphologically verified leukoplakia of the oral mucosa. Patients received treatment at the hyperthermia and photodynamic therapy department from 2013 to 2023. The average age was 51.9±8.9 years. Clinically, 211 patients (94.6%) had a flat form of the disease, 12 patients (5.4%) had a verrucous form. The photosensitizer (PS), based on chlorin e6, was administered intravenously once in doses of 1.7 to 2.5 mg/kg body weight. Irradiation of pathologically changed lesions was carried out 2-2.5 hours after the end of its infusion, using a semiconductor laser device “UPL PDT”, with a wavelength λ=665±5 nm. The laser radiation dose density varied from 25 to 100 J/cm², the power density from 0.07 to 0.32 W/cm², the duration of one irradiation field - from 2 to 13.5 minutes, depending on its linear dimensions. The severity of adverse reactions was assessed on days 1-30 after treatment using the CTCAE 4.03 scale. The immediate results of treatment were assessed up to 3 months after PDT, with morphological confirmation of the response to treatment. No serious adverse reactions were observed during PS infusion and irradiation. No symptoms of dermal phototoxicity were reported. During control examinations, up to 3 months after irradiation in patients with flat and verrucous forms, the frequency of complete regressions was 97.1% (n=205) and 58.3% (n=6) cases, partial regressions - 2,9% (n=7) and 25% (n=3) of cases, respectively. Objective response rates were observed at 100% and 83.3%, respectively. The period of observation of patients varies from 3 to 120 months. (average 66 months). The frequency of disease relapses during this period was 9%. Patients with partial regression and identified relapse were treated with repeated PDT sessions. PDT is a well-tolerated and effective treatment method for patients with leukoplakia of the oral mucosa, which has significant advantages over traditional methods of treating this precancerous pathology. These include minimal toxicity to the normal tissues surrounding the pathological foci due to the selective accumulation of PS in leukoplakia tissues, a slight risk of serious adverse reactions, the possibility of an outpatient session, the possibility of repeated treatment over a large area of damage and good cosmetic results).

Evaluation of output factors of different radiotherapy planning systems using Exradin W2 plastic scintillator detector.

This study aims to evaluate the output factors (OPF) of different radiation therapy planning systems (TPSs) using a plastic scintillator detector (PSD). The validation results for determining a practical field size for clinical use were verified. The implemented validation system was an Exradin W2 PSD. The focus was to validate the OPFs of the small irradiation fields of two modeled radiation TPSs using RayStation version 10.0.1 and Monaco version 5.51.10. The linear accelerator used for irradiation was a TrueBeam with three energies: 4, 6, and 10MV. RayStation calculations showed that when the irradiation field size was reduced from 10 × 10 to 0.5 × 0.5cm2, the results were within 2.0% of the measured values for all energies. Similarly, the values calculated using Monaco were within approximately 2.0% of the measured values for irradiation field sizes between 10 × 10 and 1.5 × 1.5cm2 for all beam energies of interest. Thus, PSDs are effective validation tools for OPF calculations in TPS. A TPS modeled with the same source data has different minimum irradiation field sizes that can be calculated. These findings could aid in verification of equipment accuracy for treatment planning requiring highly accurate dose calculations and for third-party evaluation of OPF calculations for TPS.

Photodynamic therapy in treatment of squamous cell carcinoma of oral cavity with chlorine e6 photosensitizer with long-term follow up

Photodynamic therapy is an effective method for treating superficial forms of malignant neoplasms, characterized by a minimal risk of damage to normal tissues. In this study, we presented our experience of treating cancer of the oral mucosa using photodynamic therapy, and analyzed the immediate and long-term results of treatment. 38 patients with squamous cell carcinoma of oral cavity mucosa, with a depth of invasion no more than 7 mm, were included in the study. All patients underwent photodynamic therapy with chlorine e6 based photosensitizer. Photosensitizers were administered intravenously 3 hours before irradiation, at a dosage of 1 mg/kg of the patient’s weight. Photodynamic therapy was performed with the following parameters: P – 1.0 W, Ps – 0.31 W/cm2, E – 300 J/cm2. The area of one irradiation field ranged 1.0-2.0 cm2. Treatment effect was evaluated by RECIST 1.1. Overall survival, cancer-specific survival, and disease-free survival were calculated using Kaplan-Meier curves. Evaluation of adverse events was made by .TCAE 5.0 criteria. At 35 (92.1%) out of 38 cases, complete regression was observed after photodynamic therapy. Among them in 3 out of 35 patients relapse was diagnosed in 11.5 to 43.2 months. The total number of patients who didn’t respond to treatment was 6 (15.8%). Follow-up period was 4.2-87.3 months. (mean 42.9). 34 (89.5%) out of 38 patients are alive, 1 (2.6%) died from progression, and three died from other causes. The 5-year overall survival rate was 82.1%, cancer-specific survival rate was 97.0%, and disease-free survival rate was 81.1%. Among the factors significantly (p &lt; 0.05) influencing relapse-free survival: depth of invasion &lt; 5 mm (p – 0.013) and the presence of leukoplakia (p – 0.007). When assessing cancer-specific survival, factors worsening the prognosis were: age &gt;70 years (p – 0.034) and the presence of leukoplakia (p – 0.007). Photodynamic therapy is an alternative treatment method of oral cancer superficial lesions, in case of proper assessment of primary lesion and in case of possibility of full irradiation of the tumor. Moreover, after using photodynamic therapy, the underlying connective-muscular structures are preserved, which promotes rapid healing with minimal scarring, the functions of the affected organ remain intact, and cosmetic defects do not form.

Study on LBE corrosion failure of FeAl/Al2O3 coatings after ion irradiation

FeAl/Al2O3 coatings, candidate coating materials for lead-cooled fast reactors, are first irradiated to produce pre-defects and then subjected to lead-bismuth eutectic corrosion to simulate the performance in the coupled field of irradiation and corrosion. Irradiation causes voids in the outer Al2O3 layer resulting in irradiation swelling and causes lattice distortion and dislocations in the inner FeAl layer resulting in compressive strain and intercrystalline void expansion. The weakened coatings crack during corrosion and suffer from Pb, Bi, and O penetration, causing internal corrosion and oxidation. Beyond the cracked areas, the coatings demonstrate commendable corrosion resistance with minimal penetration. The irradiation-induced structural evolution and the subsequent lead-bismuth eutectic corrosion failure of the coatings are elucidated in detail.

Electronic properties of polyethylene naphthalate as derived from photo-stimulated discharge, luminescence experiments and quantum chemical calculation

The electronic properties of thin films of poly(ethylene 2,6-naphthalate)—PEN, are investigated based on their photo-physical (optical absorption, photoluminescence) and electrical (space charge distribution, photo-stimulated discharge) behavior. Photo-stimulated currents are associated with optical absorption of the material leading to space charge dissipation as demonstrated by space charge distribution measurement. Based on this set of experimental results and quantum chemical calculation performed on PEN macromolecular system, we propose a new scheme for the electronic levels of PEN. This scheme allows understanding the mechanisms at play in photo-stimulated discharge. One of the main conclusions of our work is that photo-stimulated current measurements do not probe the energy level of traps. Detrapping of charges results from a two-step process where the photon energy is absorbed by chromophores that restitute a part of this energy to trapped charges through various mechanisms. Moreover, the new scheme allows discussing the components of the luminescence excited under different stresses, being electric field, electronic and UV irradiation, charge recombination and thermal activation.

Lateral response artifact correction method using image stitching technique in radiochromic film dosimetry.

Lateral response artifact (LRA) is caused by the interaction between film and flatbed scanner in the direction perpendicular to the scanning direction. This can significantly affect the accuracy of patient-specific quality assurance (QA) in cases involving large irradiation fields. We hypothesized that by utilizing the central area of the flatbed scanner, where the magnitude of LRA is relatively small, the LRA could be mitigated effectively. This study proposes a practical solution using the image-stitching technique to correct LRA for patient-specific QA involving large irradiation fields. Gafchromic™ EBT4 film and Epson Expression ES-G11000 flatbed scanner were used in this study. The image-stitching algorithm requires a spot between adjacent images to combine them. The film was scanned at three locations on a flatbed scanner, and these images were combined using the image-stitching technique. The combined film dose was then calculated and compared with the treatment planning system (TPS)-calculated dose using gamma analysis (3%/2mm). Our proposed LRA correction was applied to several films exposed to 18 × 18 cm2 open fields at doses of 200, 400, and 600 cGy, as well as to four clinical Volumetric Modulated Arc Therapy (VMAT) treatment plans involving large fields. For doses of 200, 400, and 600 cGy, the gamma analysis values with and without LRA corrections were 95.7%versus 67.8%, 95.5%versus 66.2%, and 91.8%versus 35.9%, respectively. For the clinical VMAT treatment plan, the average pass rate±standard deviation in gamma analysis was 94.1%±0.4% with LRA corrections and 72.5%±1.5% without LRA corrections. The effectiveness of our proposed LRA correction using the image-stitching technique was demonstrated to significantly improve the accuracy of patient-specific QA for VMAT treatment plans involving large irradiation fields.

Combined hurdle effects of pulsed electric field and ultraviolet-C irradiation on microbial load reduction and composition of hemeproteins from Asian seabass gills

The combined effects of two non-thermal technologies, namely pulsed electric field (PEF) and ultraviolet-C (UV–C) irradiation, on microbial load reduction and composition of crude hemeprotein extract (CHPE) from Asian seabass gills were investigated. PEF at two intensities (15 kV and 17.5 kV) for different times (0, 1, 2.5, 5 and 10 min) was employed to treat CHPE solution. Subsequently freeze-dried PEF treated powders were exposed to UV-C for varying durations (0, 15 and 30 min). Microbial community in gill and selected CHPE powders was also determined using next generation sequencing (NGS). PEF treatment effectively reduced the initial microbial load (8.0 log10 CFU/g) when high PEF intensity (17.5 kV) for longer treatment time (5 min) was employed, leading to microbial load reduction to 5.5 log10 CFU/g. However, prolonged PEF treatment adversely affected CHPE properties, as witnessed by the decreased heme iron content and alterations in protein patterns. Subsequent UV-C irradiation of freeze-dried PEF-treated CHPE powder for 15 min demonstrated a synergistic effect on further reduction of microbial counts to 3.0 log10 CFU/g. NGS analysis showed the dominance of Flavobacteriaceae families in the microbial community composition in gill, untreated CHPE powder and PEF-UV-C treated CHPE powder. Nevertheless, no Vibrio parahaemolyticus and other Vibrio spp. were detected in all samples. The study revealed the potential of combined non-thermal hurdle technologies, under appropriate conditions, in ensuring microbiological safety and maintaining quality of CHPE. CHPE powder could therefore be used for fortification in food products as an iron supplement to alleviate iron-deficient anemia.

Measurement of the coupling of magnetism with electricity or light irradiation in BiFeO3 using the Kerr angle

The magneto-optical Kerr effect (MOKE) in monodomain bismuth ferrite (BiFeO3) thin films was investigated under applied electric fields and light irradiation. The field-swept MOKE measurements show that the Kerr rotation of BiFeO3 changes under applied electric fields or light irradiation. The piezoresponse force microscopy measurements found that the variation in electrical polarization at the BiFeO3 surface was similar under an applied electric field and ultraviolet irradiation, confirming that the Kerr rotation of BiFeO3 can be controlled using both electric fields and light irradiation. This paper presents a method to couple a magnetic field with an electric field or light irradiation via the Kerr angle measurements of BiFeO3, providing a concept for fabricating multifunctional devices in oxide electronics.

Development of a dose-rate dosimeter using a silicon photodiode for a medical linear accelerator in a 10 MV flattening filter-free mode.

This study was aimed at developing a dose-rate dosimeter to measure the instantaneous dose rate of a commercially available medical linear accelerator. A dose-rate dosimeter composed of a silicon photodiode (Si-PD), a complementary metal-oxide semiconductor single operational amplifier, a resistor of 20 MΩ, a capacitor of 100 pF, and a mini-substrate measuring 16 × 16mm2 was evaluated. Voltage outputs from the proposed dosimeter were measured using an analog-to-digital converter on a microcomputer. A custom-made x-ray tube generator at an energy of 120kV with a tube current ranging from 0.1 to 2.0 mA was used for the dose-rate calibration. Dose-rate calibration was performed 83.3mm from an x-ray source using a commercially available semiconductor dosimeter. The developed Si-PD dosimeter could measure up to 0.6 Gy/s at a distance of 19.3mm from the x-ray source. Measurements were also performed using a medical linear accelerator in a 10 MV flattening filter-free mode at depths of 0, 25, 50, and 100mm with an irradiation field of 100 × 100mm2 at a constant distance of 1000mm from the source to the dosimeter. A peak voltage variation corresponding to the instantaneous dose rate was observed using a sampling period of 1.0ms, and the peak voltages decreased with the depth. The detected pulse numbers were 512, 484, 491, and 511 at depths of 0, 25, 50, and 100mm, respectively.

Application of stoichiometric CT number calibration method for dose calculation of tissue heterogeneous volumes in boron neutron capture therapy.

Monte Carlo simulation code is commonly used for the dose calculation of boron neutron capture therapy. In the past, dose calculation was performed assuming a homogeneous mass density and elemental composition inside the tissue, regardless of the patient's age or sex. Studies have shown that the mass density varies with patient to patient, particularly for those that have undergone surgery or radiotherapy. A method to convert computed tomography numbers into mass density and elemental weights of tissues has been developed and applied in the dose calculation process using Monte Carlo codes. A recent study has shown the variation in the computed tomography number between different scanners for low- and high-density materials. The aim of this study is to investigate the effect of the elemental composition inside each calculation voxel on the dose calculation and the application of the stoichiometric CT number calibration method for boron neutron capture therapy planning. Monte Carlo simulation package Particle and Heavy Ion Transport code System was used for the dose calculation. Firstly, a homogeneous cubic phantom with the material set to ICRU soft tissue (four component), muscle, fat, and brain was modelled and the NeuCure BNCT system accelerator-based neutron source was used. The central axis depth dose distribution was simulated and compared between the four materials. Secondly, a treatment plan of the brain and the head and neck region was simulated using a dummy patient dataset. Three models were generated; (1) a model where only the fundamental materials were considered (simple model), a model where each voxel was assigned a mass density and elemental weight using (2) the Nakao20 model, and (3) the Schneider00 model. The irradiation conditions were kept the same between the different models (irradiation time and irradiation field size) and the near maximum (D1%) and mean dose to the organs at risk were calculated and compared. A maximum percentage difference of approximately 5% was observed between the different materials for the homogeneous phantom. With the dummy patient plan, a large dose difference in the bone (greater than 12%) and region near the low-density material (mucosal membrane, 7%-11%) was found between the different models. A stoichiometric CT number calibration method using the newly developed Nakao20 model was applied to BNCT dose calculation. The results indicate the importance of calibrating the CT number to elemental composition for each individual CT scanner for the purpose of BNCT dose calculation along with the consideration of heterogeneity of the material composition inside the defined region of interest.

The role of free flap reconstruction after resection of extremity and trunk soft tissue sarcomas. Results of two referral centers in Argentina

IntroductionFor patients affected by extremity or trunk soft-tissue sarcomas (STS) large resections might be needed to achieve negative margins. This is a common scenario especially in locally advanced or recurrent tumors often within a pre-irradiated field. The objective of this study was to evaluate the results of free-flap reconstructions (FFR) after sarcoma surgery. ObjectiveThe endpoints were surgical results, quality of surgical margins and oncological outcome. MethodsRetrospective analysis of patients with extremity and trunk STS with free-flap reconstruction between 2008 and 2022. Demographic and tumor data, perioperative treatment, margin status, morbidity and evolution were evaluated. ResultsOf 467 patients, 25 (5.35%) required 26 free-flap reconstructions. Surgery was performed on an irradiated field in 8 (32%) patients. Reconstructions were mostly needed for distal lower extremity resections and the most common type of flap used was antero-lateral tight (ALT) flap. No R2 resections were performed. R0 and R1 resections were achieved in 22 (84.6%) and 4 (15.4%), respectively. All R1 resections were preplanned positive along a preserved critical structure. Surgical morbidity rate was 26% (7/26) and the re-operation rate was 15% (4/26) with 7.7% flap losses (2/26). At a median follow-up of 38 months, 7 (28%) patients presented local recurrences. ConclusionIn a referral sarcoma center, having a multidisciplinary surgical team capable of complex resections and reconstructions is of utmost importance for a correct and integral surgical planning. This allows optimal oncologic resections with acceptable morbidity.

Prediction of Overall Disease Burden in (y)pN1 Breast Cancer Using Knowledge-Based Machine Learning Model.

We aimed to construct an expert knowledge-based Bayesian network (BN) model for assessing the overall disease burden (ODB) in (y)pN1 breast cancer patients and compare ODB across arms of ongoing trials. Utilizing institutional data and expert surveys, we developed a BN model for (y)pN1 breast cancer. Expert-derived probabilities and disability weights for radiotherapy-related benefit (e.g., 7-year disease-free survival [DFS]) and toxicities were integrated into the model. ODB was defined as the sum of disability weights multiplied by probabilities. In silico predictions were conducted for Alliance A011202, PORT-N1, RAPCHEM, and RT-CHARM trials, comparing ODB, 7-year DFS, and side effects. In the Alliance A011202 trial, 7-year DFS was 80.1% in both arms. Axillary lymph node dissection led to higher clinical lymphedema and ODB compared to sentinel lymph node biopsy with full regional nodal irradiation (RNI). In the PORT-N1 trial, the control arm (whole-breast irradiation [WBI] with RNI or post-mastectomy radiotherapy [PMRT]) had an ODB of 0.254, while the experimental arm (WBI alone or no PMRT) had an ODB of 0.255. In the RAPCHEM trial, the radiotherapy field did not impact the 7-year DFS in ypN1 patients. However, there was a mild ODB increase with a larger irradiation field. In the RT-CHARM trial, we identified factors associated with the major complication rate, which ranged from 18.3% to 22.1%. The expert knowledge-based BN model predicted ongoing trial outcomes, validating reported results and assumptions. In addition, the model demonstrated the ODB in different arms, with an emphasis on quality of life.

Comparing the effects of irradiation with protons or photons on neonatal mouse brain: Apoptosis, oncogenesis and hippocampal alterations

Background and PurposeMedulloblastoma (MB) is a common primary brain cancer in children. Proton therapy in pediatric MB is intensively studied and widely adopted. Compared to photon, proton radiations offer potential for reduced toxicity due to the characteristic Bragg Peak at the end of their path in tissue. The aim of this study was to compare the effects of irradiation with the same dose of protons or photons in Patched1 heterozygous knockout mice, a murine model predisposed to cancer and non-cancer radiogenic pathologies, including MB and lens opacity. Materials and MethodsTOP-IMPLART is a pulsed linear proton accelerator for proton therapy applications. We compared the long-term health effects of 3 Gy of protons or photons in neonatal mice exposed at postnatal day 2, during a peculiarly susceptible developmental phase of the cerebellum, lens, and hippocampus, to genotoxic stress. ResultsExperimental testing of the 5 mm Spread-Out Bragg Peak (SOBP) proton beam, through evaluation of apoptotic response, confirmed that both cerebellum and hippocampus were within the SOBP irradiation field. While no differences in MB induction were observed after irradiation with protons or photons, lens opacity examination confirmed sparing of the lens after proton exposure. Marked differences in expression of neurogenesis-related genes and in neuroinflammation, but not in hippocampal neurogenesis, were observed after irradiation of wild-type mice with both radiation types.Conclusion.In-vivo experiments with radiosensitive mouse models improve our mechanistic understanding of the dependence of brain damage on radiation quality, thus having important implications in translational research.

Construction of highly active photocatalytic interfaces through light field modulation and photo-deposition of Pd sites

Anchoring noble metal sites through photo-reduction is an effective way to modulate charge distribution on photocatalytic interfaces, thereby enhancing photocatalytic performance. The irradiation field on the exposed surfaces of photocatalysts has an important influence on the morphology and distribution of noble metal sites. However, non-uniform light field derived from the scattering effects of particle-form photocatalysts hinders the well-distributed photo-deposition of noble metal sites. To address this challenge, we proposed a photo-deposition method utilizing the optical fiber coated with photocatalysts. TiO2 nanorod (NR) array was coated on the optical fiber to achieve a well-distributed irradiation filed across the NR array. This resulted in a concentration of the irradiation field primarily within the NR array, maintaining uniformly distributed light intensities throughout. Palladium (Pd) sites dominated by nanoclusters were well distributed on TiO2 NR array utilizing a photo-reduction method. These Pd sites functioned as electron acceptors, facilitating the effective separation and transfer of photo-generated carriers. Consequently, an highly active photocatalytic reaction interface was constructed, demonstrating the accumulation of a substantial concentration of holes and their efficient conversion into hydroxyl radicals (·OH). Notably, hydroxyl radicals with a concentration of 62.6 μM could be generated within 14.4 min. The construction of this efficient photocatalytic interface offers an optimal platform for accelerating photocatalytic reactions and enhancing photocatalytic efficiency.

Exploring Pyroelectricity, Thermal and Photochemical Switching in a Hybrid Organic‐Inorganic Crystal by In Situ X‐Ray Diffraction

AbstractThe switching behavior of the novel hybrid material (FA)Na[Fe(CN)5(NO)].H2O (1) in response to temperature (T), light irradiation and electric field (E) is studied using in situ X‐ray diffraction (XRD). Crystals of 1 display piezoelectricity, pyroelectricity, second and third harmonic generation. XRD shows that the FA+ are disordered at room‐temperature, but stepwise cooling from 273–100 K induces gradual ordering, while cooling under an applied field (E=+40 kVcm−1) induces a sudden phase change at 140 K. Structural‐dynamics calculations suggest the field pushes the system into a region of the structural potential‐energy surface that is otherwise inaccessible, demonstrating that application of T and E offers an effective route to manipulating the crystal chemistry of these materials. Photocrystallography also reveals photoinduced linkage isomerism, which coexists with but is not correlated to other switching behaviors. These experiments highlight a new approach to in situ studies of hybrid materials, providing insight into the structure–property relationships that underpin their functionality.

Exploring Pyroelectricity, Thermal and Photochemical Switching in a Hybrid Organic-Inorganic Crystal by In Situ X-Ray Diffraction.

The switching behavior of the novel hybrid material (FA)Na[Fe(CN)5(NO)].H2O (1) in response to temperature (T), light irradiation and electric field (E) is studied using in situ X-ray diffraction (XRD). Crystals of 1 display piezoelectricity, pyroelectricity, second and third harmonic generation. XRD shows that the FA+ are disordered at room-temperature, but stepwise cooling from 273-100 K induces gradual ordering, while cooling under an applied field (E=+40 kVcm-1) induces a sudden phase change at 140 K. Structural-dynamics calculations suggest the field pushes the system into a region of the structural potential-energy surface that is otherwise inaccessible, demonstrating that application of T and E offers an effective route to manipulating the crystal chemistry of these materials. Photocrystallography also reveals photoinduced linkage isomerism, which coexists with but is not correlated to other switching behaviors. These experiments highlight a new approach to in situ studies of hybrid materials, providing insight into the structure-property relationships that underpin their functionality.

Non-thermal effect on collision cascade of tungsten

The intense electronic excitations in materials can trigger a series of non-thermal effects, seriously affecting the physical properties of materials. However, the electronic effects on collision cascade of tungsten (W) plasma-facing material in fusion reactors remains unclear. Based on the tight-binding theory, the non-thermal effects on the collision cascade of W material are extensively studied. Our results show that the non-thermal effect arising from intense electronic excitations induces substantial increase in the sputtering yield, as well as in the number of point defects during collision cascade in W slabs. Analysis shows that the observed phenomena are closely related to the deterioration of system’s stability under intense electronic excitations, since high electronic temperature results in the weakness of bonding strength among W atoms. Our work highlights the importance of electronic excitation effects in evaluating the resistance of W material to radiation damage when subjected to intense irradiation fields in fusion reactors.