Field Situations Research Articles

Voluntary head dunking after exercise-induced hyperthermia rapidly reduces core body temperature in dogs.

To evaluate field-applicable cooling methods for treatment of exercise-induced hyperthermia in dogs. In this randomized, crossover study from June 27, 2023, to July 24, 2023, 12 working dogs exercised for 10 minutes until core body temperature reached 40.6 °C or above or ≥ 2 signs of heat stress were observed. Four different cooling protocols were evaluated: (1) neck chemical ice packs (2), (2) a wet (22 °C) neck towel, (3) wet (22 °C) axillae towels, or (4) voluntary head immersion ("dunking") into (22 °C) water. After intervention, dogs rested and were monitored for 40 minutes. The dunking protocol, which included limited water ingestion, produced the lowest mean core temperature in the initial 5 minutes after exercise, in the subsequent 35 minutes during which dogs cooled to baseline temperature and was the only protocol to prevent the initial postexercise temperature rise. All methods resulted in return to baseline temperature. Trained voluntary head dunk with limited water ingestion results in rapid cooling in field situations of exercise-induced hyperthermia in dogs with normal mental status and ability to pause panting. "Cool first, transport second" reduces morbidity and mortality of acute heat injury. When whole-body water immersion is not an option, the trained voluntary head dunk in mentally appropriate dogs prevents postexercise rise and rapidly reduces core body temperature within the first 5 minutes. Alternatively, allowing the dog to drink controlled amounts of cool water and pouring water on the dog's head may provide some benefit but warrants further study.

Detecting subtle subterranean movement via laser speckle imaging.

A diversity of organisms live within underground environments. However, visualizing subterranean behavior is challenging because of the opacity of most substrates. We demonstrate that laser speckle imaging, a non-invasive technique resolving nanometer-scale movements, facilitates quantifying biological activity in a granular medium. We monitored fire ants (Solenopsis invicta) at different developmental stages, burial depths (1-5 cm) and moisture fractions (0 and 0.1 by volume) in a container of 0.7 mm glass particles. Although the speckle pattern from the backscattered light precludes direct imaging of animal kinematics, analysis of integrated image differences revealed that spiking during ant movement increased with the developmental phase. Greater burial depth and saturation resulted in fewer and lower magnitude spikes. We verified that spiking correlated with movement via quasi-2D experiments. This straightforward method, involving a laser and digital camera, can be applied to laboratory and potentially field situations to gain insight into subterranean organism activities.

Employing a Generalization of Open Sets Defined by Ideals to Initiate Novel Rough Approximation Spaces with a Chemical Application

A close similarity and analogy between rough set theory and topology is attributed to the corresponding behavior of lower and upper rough approximations with interior and closure topological operators, respectively. This relation motivates joint studies between topology and this theory. We endeavor by rough set theory to enlarge the knowledge we obtain from the information systems, for this reason, we apply the abstract concept of ideal structures to build new generalized approximation spaces with less vagueness. In the present work, we employ a novel type of nearly open sets in topology so-called ``${\mathcal{L}}$-${\theta\beta}_{\lambda}$-open" with an ideal structure to introduce novel approximation spaces satisfying the desired properties concerning shrinking the boundary region of uncertainty and expanding the domain of confirmed information. We set up the fundamentals of the proposed rough paradigms and demonstrate their superiority over the preceding paradigms induced by some nearly open sets. Two algorithms are furnished to illustrate the way of specifying the family of ${\mathcal{L}}$-${\theta\beta}_{\lambda}$-open sets and exploring whether a subset is ${\mathcal{L}}$-${\theta\beta}_{\lambda}$-definable or ${\mathcal{L}}$-${\theta\beta}_{\lambda}$-rough. Then, we put forward the concepts of rough membership relations and functions and uncover their core characterizations. Finally, we examine the proposed models to model a real situation in the Chemistry field and clarify how our models improve the outcomes of generalized approximation spaces over the previous models.

First detection of D181 genotype of infectious bronchitis in poultry flocks of Morocco

BackgroundThis paper reports the first pathological and molecular characterization of the novel variant of infectious bronchitis virus (IBV) D181 in poultry flocks in Morocco and Africa.MethodsThe study includes six poultry farms, involving three flocks of layers aged between 28 and 67 weeks and three broiler flocks aged 27, 39 and 42 days from different regions of Morocco. In all affected layer flocks, a severe drop in egg production with poor eggshell quality was reported. Necropsy of dead birds was carried out, and samples of trachea, lungs, oviduct, ovaries, and kidneys were fixed in 10% neutral buffered formalin for histopathologic examinations, while other portions were stored at -20 °C for molecular analysis. Real time RT-qPCR for IBV gene group was performed, and IBV variants were identified. Partial S1 gene sequences were amplified by conventional RT-PCR, sequenced, and aligned for phylogenetic and amino acid similarity analysis.ResultsNecropsy of dead birds revealed misshapen and hemorrhagic ovarian follicles with an edematous oviduct and severe reaction in the cecal tonsils. A caseous material accumulation in the sinus was noted in few birds. In contrast, the broiler flocks exhibited respiratory clinical signs such as difficulty in breathing, sneezing, tracheal rales, watery eyes and lethargy, associated with a decrease in feed consumption. Mortality in broiler ranged from 2 to 15%. Histopathological analysis of samples showed a lympho-plasmocytic inflammation in the oviduct, trachea, and lungs. Individual necrosis of epithelial cells, with sloughing of the bronchial epithelium and accumulation of desquamated cells with mucus in the airways, was observed in some birds. Partial S1 gene sequencing and phylogenetic analyses showed that the Moroccan strains were very closely related to D181 strains isolated in Dutch layers and breeders in 2018. Nucleotide sequence identities reached 90.9–95% with the Dutch isolates (strain CK/NL/D181/2018).ConclusionOur sequencing results demonstrate for the first time that the D181 IBV genotype is circulating in Moroccan poultry. These findings justify permanent monitoring of circulating strains in order to appropriately adjust vaccination strategies to align with the evolving field situation.

Potential amendments of coal fly ash-derived zeolite to beryllium contaminated soil at a legacy waste disposal site

Management of Be contamination using industrial solid waste or solid waste-derived amendments is not well understood. This study investigated the potential of Australian coal fly ash (CFA), derived synthesized zeolite (SynZ) and chitosan-modified zeolite (ModZ), for Be immobilization at the Little Forest Legacy Waste Site (LFLS), a low-level radioactive waste disposal site near Sydney, Australia. In laboratory simulation experiments, the SynZ and ModZ were separately applied as an amendment to both naturally contaminated soil and simulated contaminated (spiked) soil. Different techniques, including pore water (PW), batch desorption, and microbial activities were assessed to provide insight into immobilization mechanisms. Results revealed that amendment of 2% ModZ in soils, substantially decreased Be concentrations in PW (PWBe) ranging from 13.3% to 99.5% across all concentrations of Be. In contrast, PWBe increased while using SynZ, which could be attributed to the increased solubility of different organic-inorganic elements in PW. Moreover, batch desorption using Milli-Q water, simulated acid rainwater [H2SO4/HNO3 = 60/40, (v/v), and 0.11 M acetic acid solution also revealed similar patterns of Be immobilization as found in PWBe analysis. Soil amendments boosted microbial biomass carbon, and phosphorous (MBC,P), along with basal respiration (BRCO2). This indicates increased microbial activities, which are linked with environmental eco-friendliness. This effect was substantially noticed in ModZ-amended soils, exhibiting up to 22 times higher in BRCO2 values compared to unamended soil. Additionally, reduced PWBe was correlated with soluble organic-inorganic elements, desorbed Be in the batch study, and soil MBc. The differences in behavior between SynZ and ModZ underline the importance of carefully studying the various potential amendment materials and the need to evaluate their performance before application in field situations. This study highlights ModZ's effectiveness in eco-friendly Be immobilization, underlining the role of organic functional groups in zeolite architecture, a key factor in controlling Be in soils.

A Review of CiteSpace Visualisation and Analysis of High-Temperature Corrosion Inhibitors for Oil and Gas Fields

With the increasing global energy demand, the exploitation depth of oil and gas fields is gradually increasing. At the same time, importing many high-acid crude oil makes it increasingly heavy and inferior, and its acid value is constantly improving. This change has led to the increasingly severe corrosion problem of oil and gas field equipment, which has become an essential factor affecting the national economy and society's sustainable development. As an economical and practical anticorrosion measure, corrosion inhibitors play a crucial role in the anticorrosion of oil and gas field equipment. Through the research method of biorientation, retrieve the Web of Science database in 2008-2024 about oil and gas field high-temperature corrosion inhibitor research literature information, using CiteSpace measurement analysis software visual analysis in the literature keywords, publications, high citation frequency, cooperation and word clustering information change trend, analyze the research situation of oil and gas field in recent years, summarizes the research hotspot of oil field high-temperature corrosion inhibitor, prominent authors and institutions, reference relationship and development trend. The number of documents on high-temperature corrosion inhibitors in oil and gas fields is smaller, and the authors, institutions, and countries are not closely related. There is less research cooperation on high-temperature corrosion inhibitors in oil and gas fields, and more independent studies exist. China University of Petroleum has the first number of publications, and China is the country with the first number of publications. The study of mass spectrometry for corrosion inhibitors in oil and gas fields is prominent, while the literature on high-temperature corrosion inhibitors is rare.

Characterization of the scattered pressure from a cylindrical shell close to a free surface and understanding of the depth-dependent phenomenon

The characterization of the scattered pressure field of a submerged cylindrical target is of interest for underwater acoustics applications. The aim of this work is to study the vibroacoustic behavior of an immersed cylindrical shell excited by a plane wave, particularly in close proximity to a free surface. To achieve this goad, finite element simulation and experimental investigation are carried out on a mock-up. The effect of the free surface is highlighted by comparing results to those obtained in a free field situation, in both time and frequency domains. Additional echoes are observed on the time signals due to the presence of the free surface. In fact, after being scattered by the target, these echoes reflect on the surface, implying a time shift between echoes directly from the target and those that have travelled a longer path. The spectrum is also impacted as the form function shows additional oscillations. These observations are depth-dependent. To determine wave trajectories, a study based on flight time and ray theory is conducted.

Correlation between soundscape and sense of culture in historic public space

Soundscapes, as part of cultural heritage, have attracted attention for their role in crafting atmospheres and fostering a sense of place. It is still unclear how soundscapes and the sense of culture interlink within historic public spaces. This research explores how soundscape elements influence the sense of culture in historic towns. Twenty-five typical railway-type historic town public spaces in northern China are selected as examples. We restored the field situation in the laboratory. Through correlation analysis in SPSS, we analyzed the relationships between soundscape elements (encompassing objective environmental attributes and subjective perception) and cultural senses. The result shows: 1) Natural sounds, people sounds, and cultural activities sounds like music/shows significantly influence the sense of culture in historical spaces along the Chinese Eastern Railway (CER). 2)Calm and stable sound environments contribute to creating a cultural atmosphere. 3)Pleasure and eventful sounds strengthen people's connection to culture. 4)Enclosed spaces, pedestrian-friendly environments, and bustling crowds enhance the cultural ambience. 5)Visual perception correlates more strongly with the sense of culture than auditory evaluation. This research provides valuable insights for enhancing cultural senses in historic towns through soundscape design.

Research and Application of Electromagnetic Heating Device for Digital Well Site Crude Oil Export

Abstract Most well sites have discontinued using the associated gas-fired furnaces in response to the current situation in the oil fields. Coal-fired heating furnaces are environmentally polluting and prohibited due to local environmental regulations. These two heating methods can cause high costs, poor heating efficiency, and environmental pollution, which cannot be achieved through remote digital monitoring. Research has been conducted on the digital electromagnetic heating device for crude oil in the well site, focusing on introducing its main components and functions, including the electromagnetic heating body, frequency conversion control cabinet, and digital remote monitoring terminal. This device provides one-way internal heating without a heat source, resulting in high thermal efficiency, safety, environmental friendliness, and energy conservation. It comprehensively addresses the drawbacks of traditional electric heating, characterized by low efficiency, susceptibility to damage, and difficult maintenance. In 2022, it was applied at three well sites in the Tongzhai operation area of the Third Oil Production Plant of Changqing Oilfield, replacing the existing gas-fired and coal-fired heating furnaces to heat crude oil, as well as heating the heating belt and various electric heating pipes. This device is highly efficient, safe, environmentally friendly, and energy-saving. Additionally, the temperature and pressure of electromagnetic heating crude oil can be digitally and remotely monitored.

Technology and Research on Improving Oil Recovery by Volume Fracturing with Phase Change Permeability in Ultra-low Permeability Reservoirs

Abstract The conventional water injection development production wells in ultra-low permeability reservoirs have low efficiency, low production and low liquid content, and poor economic benefits. Traditional water drive development techniques are difficult to adapt to the requirements of economically effective development in ultra-low permeability reservoirs. Therefore, it is urgent to adjust development ideas and transform water injection development methods. A major development experiment was carried out in the Y284 area of Huaqing Oilfield to transform the water injection development method. Based on the mechanism of reverse osmosis flooding in oil recovery wells, this article uses dynamic monitoring technologies such as downhole microseismic to achieve three-dimensional reservoir transformation, and establishes a large-scale fracturing technology of “collaborative permeability flooding, volume fracturing, and multi-stage temporary plugging” for reverse osmosis wells in ultra-low permeability reservoirs. Research has shown that large-scale fracturing technology for water injection wells can improve single well oil recovery speed by increasing the complexity of fracture networks. The important factors affecting the effectiveness of water injection wells include reservoir properties, fracturing transformation scale, cumulative water injection volume, remaining oil distribution, and heterogeneity of aquifers. At the same time, the construction parameters of large-scale volume fracturing for water injection wells, namely 140-170m, are quantitatively determined based on the actual situation of the mining field ³ The amount of sand added, a sand ratio of 17-22%, and a large displacement of 8-10m3/min, 1400-2000m ³ The amount of liquid entering the ground can most effectively achieve the conditions for reservoir transformation. The conclusion is that large-scale fracturing technology for conversion wells provides technical support for volume fracturing and optimization design of fracturing parameters for low production wells in ultra-low permeability reservoirs, and can provide guidance and reference for the efficient development of other similar ultra-low permeability reservoirs.

Numerical Simulation Study of Gas–Liquid–Solid Triphase Coupling in Fully Mechanized Excavation Faces with Variation in Dust Source Points

In view of the current situation where research on the dust diffusion laws of different dust source points is limited and the gap with the actual field situation is too large; this study employs an innovative gas–liquid–solid triphase coupling method to investigate how dust moves and spreads in the fully mechanized excavation face 431305 at the Liangshuijing Mine; focusing on both the dust field and the dust–fog coupled field. The results indicate that using the long-pressure short-suction ventilation method; dust movement in the roadway is primarily influenced by the airflow; which can be classified into vortex; jet; and return flow regions. The analysis reveals that different dust source points affect dust distribution patterns. Dust source 1 generates the highest dust concentration; primarily accumulating on the duct side and return air side of the roadway. By contrast; dust source 2’s dust mainly gathers at the heading and the front of the cutting head. Dust sources 3 and 4 show lower dust concentrations near the top of the roadway. Dust source 5 achieves the most effective dust removal; aided by airflow and a suction fan; showcasing superior dust performance. A comprehensive comparison indicates that dust source 1 has the highest overall dust concentration. Therefore; further simulation of the distribution law of dust generated at dust source 1 under the action of water mist reveals that the dust concentration near the heading face is reduced from 2000 mg/m3 under the action of single air flow to about 1100 mg/m3. At t = 5 s; the spray droplets almost cover the entire tunneling face; leading to a significant decrease in dust concentration within 10–25 m from the tunneling face. Within 40 s; both coal dust and spray droplets are significantly reduced. The field measurement results verify the accuracy of the simulation results and provide certain guidance for promoting the sustainable development of the coal industry.

Pendekatan Blue Ocean Strategy pada Labuda Kopi dalam Menghadapi Persaingan Coffe Shop di Sidoarjo

This study aims to determine the strategy used by managers to face competition in coffee shops in Sidoarjo using the Blue Ocean Strategy Approach. In this study, the method used was a qualitative descriptive approach. Qualitative descriptive research has the objective of describing, illustrating, and explaining in greater depth the problem being observed. In qualitative research, the main subject of research is human beings, and the results of this research are manifested in the form of words appropriate to the field situation. The results of this research through the E-R-R-C scheme set for Labuda Kopi are as follows: First, in the step to eliminate, the menu of Honey Spices Lime and Honey Spices Flower Tea is abolished. Then, in the subtract step, the price of the product that has been set will be reduced. Furthermore, in the step of upgrading, Labuda Kopi will add stands with shade, improve marketing strategies, and increase the facilities provided. Finally, in the creation step, Labuda Kopi will create new distinctive coffee variants and also create a new set menu.

How to spark team flow over time

AbstractAn important question in teamwork research is how to maximize performance and the aspects of the team's dynamics and collaboration process that underpin it. Prior research has shown that when team members who are collaborating towards a common purpose experience flow together (team flow; optimal experiences that occur simultaneously at the individual and team levels, entailing deep focus and intrinsic motivation to perform an activity), the team significantly improves its performance and team members experience many positive results at both the individual and team levels. Further advances have built a model of team flow and a means for measuring the construct, as well as qualitative results in business teams to confirm how the elements of team flow interact to generate the positive experiences and higher performance. This study adds practical value to the research by providing proof‐of‐concept for an intervention that promotes team flow in business teams. This cross‐case‐study of 15 teams across five different organizations uses the Team Flow Monitor as a barometer of team health and dynamics, which in turn serves as the centerpiece of an iterative intervention protocol for leading/guiding teams in targeted self‐reflection that can generate virtuous cycles of improving dynamics and performance. In addition to a significant amount of qualitative data confirming the efficacy of the intervention in enabling teams to overcome obstacles and experience more team flow, quantitative analysis of Team Flow Monitor scores showed an increase on average team flow scores across the teams over the course of the intervention (Cohen's d = 0.6). Implications for translating team flow research to field situations are discussed, along with further potential uses of the Team Flow Monitor.

Augmented Reality and Its Integration into Responsive Web Design

Augmented reality (AR) is quickly changing the way people interact with digital content by adding virtual features to real-world settings. This essay looks at how AR can be added to Responsive Web Design (RWD) to improve user involvement and interaction on a wide range of devices without any problems. Making systems that work well on screens of different sizes and orientations is what responsive web design is all about. This flexibility makes sure that watching and interacting are best on computers, tablets, and smartphones. Adding AR to RWD makes this flexibility even greater by adding engaging virtual material that changes based on the user's surroundings. Device support, network delay, and image speed are some of the biggest technical problems that come up when AR is used together. Using HTML5, CSS3 media queries, and JavaScript tools to make AR experiences that work well on all devices is one way to deal with these problems. By mixing AR features with RWD ideas, developers can make experiences that are engaging and can be accessed from any device without slowing them down or making them harder to use. In AR-enhanced RWD, user experience (UX) is all about making exchanges easy and quick. Spatial tracking for accurate virtual object placement, motion recognition for natural interaction, and device position detection for smooth merging with the real world are all things that designers have to think about when they're making something. These parts work together to make an interesting user journey that mixes digital and real-world experiences. Case studies show how AR can be used in real-world situations in fields like education, entertainment, and shopping. Virtual try-on experiences in e-commerce, engaging learning material on top of textbooks, and rich stories in digital media are all examples.

Experimental and Simulation Investigations of Proppant Transport and Distribution Between Perforation Clusters in a Horizontal Well

Summary Multistage hydraulic fracturing is widely used to stimulate tight reservoirs by means of plug and perforation technology. The proppant distribution between perforation clusters significantly impacts fracture conductivity and well productivity. Uneven slurry distribution is often the norm rather than the exception. Proppant transport behaviors and distribution characteristics are still poorly understood in a horizontal wellbore with clusters, especially at field scales. The objective is to propose an innovative and feasible method to quantitatively evaluate the distribution uniformity of proppant between clusters. In this work, we systematically investigate proppant migration and placement by means of laboratory tests and numerical simulation. Computational fluid dynamics (CFD) and the discrete element method (DEM) are coupled to analyze proppant-fluid flow. The experimental observation and results validate the numerical model and calibrate critical parameters. The transport efficiency (E) and normalized standard deviation (NSD) are used to evaluate proppant distribution. The effects of nine parameters on the E and NSD are investigated at field ranges. The calibrated CFD-DEM model is accurate in studying proppant distribution between multiple clusters. The toe bias is the primary distribution between clusters because of the large inertia originating from high injection rates. Fluid distribution and perforation configuration are critical factors that significantly change the toe bias at the cluster level. Fluid redistribution changes proppant distribution toward the heel. The inline up pattern has the best uniformity, followed by the 180° up-down pattern. The secondary characteristic is bottom-biased within a cluster. Increasing fluid viscosity, using small and light proppants, and pumping high-concentration slurry can improve proppant distribution. The slurry diversion into perforations is hardly changed unless external conditions change. The combination of high-concentration slurry and a large bed quickly induces premature screenout at the toe-side cluster, especially when injecting large and high-density particles. Slurry redistributes toward the heel if the toe-side cluster is blocked. The investigation provides a rational and feasible method for operators to understand proppant transport between clusters and optimize pumping parameters under field situations.

Knowledge graph analysis of research on nurses' psychological resilience.

In recent years, a surge in literature on psychological nurse resilience, largely driven by the COVID-19 pandemic, has prompted the need for a comprehensive understanding of the current state and emerging trends through reliable methodologies. The purpose of this study was to analyzes the research on nurses' psychological resilience through bibliometrics to understand the current situation, foundation, and hotspot of this research field. The Web of Science core collection database was used as the search source, and CiteSpace analysis software was employed to conduct bibliometric analysis on authors, countries, institutions, keywords, and references of nurse psychological resilience-related literature published from the establishment of the database to July 11, 2023. A total of 1060 articles were included in the final analysis. The study of nurses' psychological resilience had been highly popular and had formed a new and important research basis in recent years. China and the United States led in the number of publications and centrality respectively, with Monash Univ and Curtin Univ as top institutions in the number of publications and centrality respectively. The authors with the highest number of publications and the most frequently cited were Rees and Connor Km respectively. The most frequently cited article was Factors Associated with Mental Health Outcomes Among Health Care Workers Exposed to Coronavirus Disease 2019 published by Lai, JB, etc. Important key keywords included mental health, resilience, stress, health, outbreak, acute respiratory syndrome, etc. The research topics in this field mainly focused on 4 aspects, including nurses' mental health, post-traumatic stress disorder, job burnout and job satisfaction, and intervention research on psychological resilience. The results of bibliometric analysis provide direct support for future scholars to explore and determine the research direction, hot spots, and find authoritative authors and institutions. At the moment, nurses' psychological resilience research has established a new foundation, primarily focusing on COVID-19-related topics. Given the potential prolonged coexistence of COVID-19 and other diseases, the main research focus remains innovating and validating effective psychological resilience intervention strategies for nurses' overall well-being.

Research on the method of air gap clearance selection for bushing at high-altitude areas

Abstract As an important component of the core equipment of the UHV substation, the operation reliability of the bushing is directly related to the safe operation of the main equipment. There are some technical problems in the development of casing in the Sichuan-Chongqing project, such as technical problems at high altitudes and a lack of relevant experience in the correction of air gap and equipment external insulation altitude. Therefore, there is an urgent need to research the selection of gap distance for UHV AC substation bushing electrical characteristics test in high altitude areas. In this paper, based on the standard meteorological conditions and the rod-plate gap switching impulse discharge test data at an altitude of 4300 m, the minimum gap distance of UHV AC substation bushing withstanding 1800 kV and 1950 kV under different methods is obtained. The results show that by comparing the two calculation methods, the minimum distance calculation method of the true test combined with the gap coefficient method avoids the error of altitude correction, and the minimum gap distance is reduced by 7.84%-14.17% compared with the former. The research content can provide a reference for selecting the dry arc distance of the casing. The next step should be to carry out the discharge characteristic test of the true-size electrode at a high altitude, so as to simulate the field situation more realistically and provide more powerful technical support for the project.

Risk for Endoparasites Among Production Stages of Female Goats With Notes on Sustainable Parasite Control For Smallholder Flocks

The risk of parasitism in different groups of small ruminants depends on intrinsic, environmental, and management factors. Although there are different views regarding the sex-related risk of endoparasites in small ruminants, females are undoubtedly the most affected group in the flock. Moreover, whether the greater sex-specific risk of parasitic infection observed in female goats in field situations is associated with their production or other intrinsic factors is still under scrutiny. In this paper, cross-sectional epidemiological data collected from selected small ruminant flocks were analysed to determine the distribution, risk, and burden of endoparasites in young, nonpregnant, pregnant, and lactating female goats. There was a higher incidence of gastrointestinal parasites (88.4%, 95%CI= 83.01-92.19) than blood protozoa (54.0%, 95%CI= 46.85-60.92), with a significant difference among the groups. A higher risk of gastrointestinal parasites was observed in lactating (OR = 46.667, P = 0.001) and pregnant (OR = 9.167, P = 0.003) groups. A greater risk of blood protozoan infection was also observed in the pregnant (OR = 5.971, P = 0.0104) and lactating (OR = 3.600, P = 0.0528) groups. A significant increase in the mean faecal egg count of the lactating (2.72 ± 0.76) and pregnant (2.34 ± 0.97) groups (P < 0.05) was accompanied by a significantly lower mean PCV in the lactating group (23.48 ± 4.838) than the kids (29.44 ± 6.13), or nonpregnant (27.80 ± 5.525) groups (P < 0.05). Thus, the pregnant and lactating female goats may experience a greater exposure risk and burden of endoparasites. Therefore, female goats may be selectively targeted for implementing nutritional management, controlled grazing, and selective anthelmintic treatment during pregnancy and lactation to save cost and minimise excessive use of anthelmintic.

Innovative stimuli-responsive membrane MSF brine rejection dilution by tertiary treated sewage effluent

In this study, treated wastewater and Multi-Stage Flash (MSF) brine were integrated into the Forward Osmosis (FO) system using pressure stimuli-responsive Nanofiltration (PSRNF) membranes to dilute magnesium, calcium, and sulfate MSF plant brine reject. The deposition of magnesium sulfate and calcium sulfate in the heat exchanger is one of the main issues affecting the performance and efficiency of MSF thermal desalination plants. Reducing the concentration of the divalent ions can minimize scale formation and deposition to a level that allows the MSF plant to operate at high top brine temperature (TBT) and without scale problems. The PSRNF membranes were chosen in the FO process because of their high water permeability, rejection of divalent and monovalent ions, small structure parameter (S), and inexpensiveness compared to commercial FO membranes. Three PSRNF membranes were tested in the FO process with the feed solution facing the active membrane layer to avoid active layer delamination. Although the PSRNF membrane exhibited negligible water flux at 0 bar, it increased when a 2–4 bar was applied to the feed solution. The wastewater temperature was set at 25 °C while 40 °C was the brine operational temperature to mimic the field situation. A maximum average water flux of 39.5 L/m2h was recorded at 4 bar feed pressure when the PSRNF membrane was used for the brine dilution, achieving up to 42% divalent ions dilution at 0.02 kWh/m3 specific power consumption. The average water flux in the PRSNF membrane was 35% higher than that in the commercial TFC FO membrane. Notably, the PSRNF membrane is ten times cheaper than commercial FO membranes. Notably, the PSRNF membrane is ten times cheaper than commercial FO membranes, achieving substantial cost reductions and pioneering advancements in FO purification technology.

Identification of Impeding Factors in Utilising Prefabrication during Lifecycle of Construction Projects: An Extensive Literature Review

In recent years, the topic of climate change has been increasingly noticed by the public, and carbon emission reduction is one of the primary targets for various industries worldwide. The construction industry has a profound influence in this field, so it is significant to consider what kind of efforts can be made in building projects. Many scholars agree to promote prefabrication technology for construction, but its application still faces several challenges. By undertaking desk research, this paper explores the motivation and barriers to adopting modular techniques in construction projects under the lifecycle analysis. The preliminary information of the literature review is collated from dozens of peer-reviewed academic papers. Under the whole lifecycle thought, the PEST analysis tools also present the analytical results. This research finds that the top five barriers are the attitudinal resistance to using modular constructions, lack of sufficient modular expertise and practice, increasing costs and risks on supply chain management, insufficient government support and policy making, and high design and planning requirements. Moreover, the lifecycle analysis can divide the collated barriers into each stage, and adequate government support can assist in promoting the prefabrication in building projects in financial, legal, and technical aspects. The current findings can facilitate the broader use of prefabrication in building projects, improving the environmental sustainability of stakeholders. The process of proposed desk research can also be considered a referenced pattern for other related studies. More first-hand data should be collected and evaluated in further research to improve accuracy and adapt to the newest research field and industrial situations.