Field Excitation Research Articles

Rotary excitation of non-sinusoidal pulsed magnetic fields: Towards non-invasive direct detection of cardiac conduction.

There is a need for high resolution non-invasive imaging methods of physiologic magnetic fields. The purpose of this work is to develop a MRI detection approach for non-sinusoidal magnetic fields based on the rotary excitation (REX) mechanism which was previously successfully applied for the detection of oscillating magnetic fields in the sub-nT range. The new detection concept was examined by means of Bloch simulations, evaluating the interaction effect of spin-locked magnetization and low-frequency pulsed magnetic fields. The REX detection approach was validated under controlled conditions in phantom experiments at 3 T. Gaussian and sinc-shaped stimuli were investigated. In addition, the detection of artificial fields resembling a cardiac QRS complex, which is the most prominent peak visible on a magnetocardiogram, was tested. Bloch simulations demonstrated that the REX method has a high sensitivity to pulsed fields in the resonance case, which is met when the spin-lock frequency coincides with a non-zero Fourier component of the stimulus field. In the experiments, we found that magnetic stimuli of different durations and waveforms can be distinguished by their characteristic REX response spectrum. The detected REX amplitude was proportional to the stimulus peak amplitude (R2 > 0.98) and the lowest field detection was 1 nT. Furthermore, the detection of QRS-like fields with varying QRS durations yielded significant results in a phantom setup (p < 0.001). REX detection can be transferred to non-sinusoidal pulsed magnetic fields and could provide a non-invasive, quantitative tool for spatially resolved assessment of cardiac biomagnetism. Potential applications include the direct detection and characterization of cardiac conduction.

Study on the inhibitory behavior of high-voltage electric field on the agglomeration and sedimentation of nanoparticles in suspension

Nanoparticles can improve the heat transfer effect of fluids, however, they are difficult to dissolve in the base fluid and are prone to fouling, agglomeration and sedimentation during flow, which affects their efficient heat transfer characteristics. In this paper, the inhibitory effect of high-voltage electric field on the agglomeration and deposition of TiO2 nanoparticles in suspension was comparatively studied by comprehensive gravity sedimentation, spectrophotometer, particle size analysis, and zeta potential method. Studies have shown that the absorbance of suspensions is basically the same in neutral and acidic environments. However, in a highly alkaline environment, the agglomeration rate of nanoparticles increases significantly, resulting in a decrease in the absorbance of the suspension. The high-voltage non-uniform electric field generated by the active Cu rod electrode can effectively inhibit the agglomeration of TiO2 nanoparticles. However, the suppression effect of an external electric field is not necessarily the higher the voltage, the better. Different nanomaterials have different critical voltages. The high-voltage electric field of 1 kV has the best inhibitory effect on the agglomeration and deposition of TiO2 nanoparticles. An in-depth analysis of the mechanisms of the movement and agglomeration of TiO2 particles in suspension under high-voltage electric field excitation was conducted. The result shows that the agglomeration and sedimentation of particles in suspension depend on the Zeta potential of the nano particles. The higher the absolute value, the more stable the dispersion system is.

Excitation Field Analysis of Cogging-Free Superconducting Motors for Electromagnetic Catapult

Excitation Field Analysis of Cogging-Free Superconducting Motors for Electromagnetic Catapult

Crystalline electric field excitations and their nonlinear splitting under magnetic fields in YbOCl

Recently reported van der Waals layered honeycomb rare-earth chalcohalides REChX (RE = rare earth, Ch = chalcogen, and X = halogen) are considered to be promising Kitaev spin liquid (KSL) candidates. The high-quality single crystals of YbOCl, a representative member of the family with an effective spin of 1/2, are available now. The crystalline electric field (CEF) excitations in a rare-earth spin system are fundamentally important for understanding both finite-temperature and ground-state magnetism but remain unexplored in YbOCl so far. In this paper, we conduct a comprehensive Raman scattering study to unambiguously identify the CEF excitations in YbOCl and determine the CEF parameters and wave functions. Our Raman experiments further reveal the anomalous nonlinear CEF splitting under magnetic fields. We have grown single crystals of YbOCl, the nonmagnetic LuOCl, and the diluted magnetic Lu0.86Yb0.14OCl to make a completely comparative investigation. Polarized Raman spectra on the samples at 1.8 K allow us to clearly assign all the Raman-active phonon modes and explicitly identify the CEF excitations in YbOCl. The CEF excitations are further examined using temperature-dependent Raman measurements and careful symmetry analysis based on Raman tensors related to CEF excitations. By applying the CEF Hamiltonian to the experimentally determined CEF excitations, we extract the CEF parameters and eventually determine the CEF wave functions. The study experimentally pins down the CEF excitations in the Kitaev compound YbOCl and sets a foundation for understanding its finite-temperature magnetism and exploring the possible nontrivial spin ground state. Published by the American Physical Society 2024

Open-loop narrowband magnetic particle imaging based on mixed-frequency harmonic magnetization response

IntroductionMagnetic particle imaging (MPI), a radiation-free, dynamic, and targeted imaging technique, has gained significant traction in both research and clinical settings worldwide. Signal-to-noise ratio (SNR) is a crucial factor influencing MPI image quality and detection sensitivity, and it is affected by ambient noise, system thermal noise, and the magnetization response of superparamagnetic nanoparticles. Therefore to address the high amplitude system and inherent thermal noise present in conventional MPI systems is essential to improve detection sensitivity and imaging resolution.MethodThis study introduces a novel open-loop, narrow-band MPI signal acquisition system based on mixed-frequency harmonic magnetization response. Allowing superparamagnetic nanoparticles to be excited by low frequency, high amplitude magnetic fields and high frequency, low amplitude magnetic fields, the excitation coil generates a mixed excitation magnetic field at a mixed frequency of 8.664 kHz (fH + 2fL), and the tracer of superparamagnetic nanoparticles can generate a locatable superparamagnetic magnetization signal with rich harmonic components in the mixed excitation magnetic field and positioning magnetic field. The third harmonic signal is detected by a Gradiometer coil with high signal-to-noise ratio, and the voltage cloud image is formed.ResultThe experimental results show that the external noise caused by the excitation coil can be effectively reduced from 12 to about 1.5 μV in the imaging area of 30 mm × 30 mm, which improves the stability of the detection signal of the Gradiometer coil, realizes the detection of high SNR, and makes the detection sensitivity reach 10 μg Fe. By mixing excitation, the total intensity of the excitation field is reduced, resulting in a slight improvement of the resolution under the same gradient field, and the spatial resolution of the image reconstruction is increased from 2 mm under the single frequency excitation (20.7 kHz) in the previous experiment to 1.5 mm under the mixed excitation (8.664 kHz).ConclusionsThese experimental results highlight the effectiveness of the proposed open-loop narrowband MPI technique in improving signal detection sensitivity, achieving high signal-to-noise ratio detection and improving the quality of reconstructed images by changing the excitation magnetic field frequency of the excitation coil, providing novel design ideas and technical pathways for future MPI systems.

Analytical relations for fields and currents in magnetic-pulsed «expansion» of tubular conductors of small diameter

Introduction. This work was initiated by the problems of cardiovascular diseases, which are one of the main causes of mortality of the population of our planet. More than ten years ago, in 2012, approximately 3.7 million people died of acute coronary syndrome worldwide. The fight against such pathologies is carried out with the help of so-called stents, the manufacture of which can be carried out by the method of magnetic pulse «expansion» from hollow metal cylinders. The limited production possibilities of magnetic pulse «expansion» were caused by the minimum cross-sectional size of the inductor-instrument, which can be practically manufactured. Other tools are required to perform this operation. Novelty. A system of magnetic-pulse expansion of thin-walled pipes of small diameter with an inductor that excites an azimuthal electromagnetic field in the case of direct current passing through the processing object and in the absence of its connection in an electric circuit with an inductor is proposed. Purpose. The main analytical dependencies for the characteristics of the electromagnetic processes taking place in the inductor systems for the expansion of cylindrical conductive pipes of small diameter when direct passage of current through the processed object and when it is not connected to an electric circuit with an inductor (insulated billet) is derived. Methods. The solution of the boundary value problem with given boundary conditions was carried out by applying Laplace transforms and integrating Maxwell’s equations. Results. Analytical expressions were obtained for the main characteristics of the processes: the intensities of the excited electromagnetic fields and currents in the system depending on the parameters of the studied systems. The analysis of possible technical schemes for solving the given problem indicated the choice of the optimal variant of an effective system of magnetic-pulse «stretching» of thin-walled cylindrical conductors of small diameter. Practical value. Based on the qualitative analysis of the obtained results, recommendations for the practical implementation of the proposed system were formulated. The obtained dependences allow us to give numerical estimates of the effectiveness of excitation of magnetic pressure forces on the object of processing and to choose directions for further improvement of the magnetic pulse technology for solving such problems. References 23, figures 2.

Evolution from a guided-streamer mode to a continuous-discharge mode in an atmospheric pressure argon plasma jet

Atmospheric pressure plasma jet (APPJ) has attracted much attention due to its versatile applications in various fields, which normally operates in either a guided-streamer mode or a continuous-discharge mode. In this paper, temporal evolution is observed from the guided-streamer mode to the continuous-discharge one in an argon APPJ excited by a sinusoidal voltage. Waveforms of voltage and current indicate that the voltage applied to the electrode is distorted severely from the ideal sine. For the guided-streamer mode, there is only one discharge pulse per half voltage cycle. For the mode transition or the continuous-discharge mode, there is only one discharge composed of a pulse and a hump per half voltage cycle. Fast photography implemented for the mode transition reveals that both the discharges in the positive and the negative voltage polarities evolve from the guided-streamer mode to the continuous-discharge one. In the guided-streamer mode of the mode transition, the discharge behaves as a positive streamer in the positive voltage polarity, while a negative streamer in the negative voltage polarity. In addition, the mode transition only occurs in a range of dissipated power and gap width. Based on optical emission spectroscopy, temporal evolutions of the mode transition are investigated for excited electron temperature, electron density, and field strength. Moreover, their spatial distributions along the argon stream are studied at different time instants. These results are of great importance for the discharge dynamics of APPJ.

Non-linear AC dielectric properties of epoxy composites filled with core–shell SiC particles

Abstract Core–shell structured silicon carbide (SiC)/epoxy (EP) composites exhibit superior non–linear DC conductivity. However, the high voltage alternative current dielectric properties of the composites are rarely reported. In this paper, the time–domain measurement was employed to obtain the basic dielectric characteristics, AC conductivity, and relative permittivity of the SiC/EP and SiC@Al2O3/EP composites under less than the breakdown strength of the SiC/EP (i.e. the amplitude of 1–5 kV mm−1). In addition, in the high AC electric field (i.e. the amplitude of 6–20 kV mm−1), the non–linear AC dielectric properties of the SiC@Al2O3/EP composite are also investigated. The experimental results suggest that the SiC@Al2O3/EP composite shows more obvious non–linear AC dielectric properties than the SiC/EP composite. In the high AC electric field, the AC conductivity of the SiC@Al2O3/EP composite presents the relaxation phenomenon, which is attributed to the excitation field and its derivative. This work lays a foundation for further research on the AC steady–state and transient dielectric properties of the field grading materials, which are widely used to homogenize the nonuniform electric field distribution in many electrical and electronic equipment.

Matched Electron-Transport Materials Enabling Efficient and Stable Perovskite Quantum-Dot-Based Light-Emitting Diodes.

Light-emitting diodes (LEDs) based on perovskite quantum dots (QDs), abbreviated as P-QLEDs have been regarded as significantly crucial emitters for lighting and displays. Efficient and stable P-QLEDs still lack ideal electron transport materials (ETM), which could efficiently block hole, transport electron, reduce interface non-radiative recombination and possess high thermal stability. Here, we report 2,4,6-Tris(3'-(pyridine-3-yl) biphenyl-3-yl)-1,3,5-triazine (TmPPPyTz, 3P) with strong electron-withdrawing moieties of pyridine and triazine to modulate the performance of P-QLEDs. Compared with commonly used 1,3,5-Tris(1-phenyl-1H-benzimidazol-2-yl)benzene (TPBi), the pyridine in 3P have a strong interaction with perovskites, which can effectively suppress the interface non-radiative recombination caused by the Pb2+ defects on the surface of QDs. In addition, 3P have deep highest occupied molecular orbital (HOMO) (enhancing hole-blocking properties), matched lowest unoccupied molecular orbital (LUMO) and excellent electron mobility (enhancing electron transport properties), realizing the carrier balance and maximizing the exciton recombination. Furthermore, high thermal resistance of 3P obviously improves the stability of QDs under variable temperature, continuous UV illumination, and electric field excitation. Resultantly, the P-QLEDs using the 3P as ETM achieved an outstanding performance with a champion EQE of 30.2 % and an operational lifetime T50 of 3220 hours at an initial luminance of 100 cd m-2, which is 151 % and about 11-fold improvement compared to control devices (EQE=20 %, T50=297 hours), respectively. These results provide a new concept for constructing the efficient and stable P-QLEDs from the perspective of selective ETM.

Magnetic Railway Sleeper Detector

In an ever expanding railway network all around the world, the need for track maintenance grows steadily. Traditionally, one major part of track maintenance is ramming large vibrating steel picks into the gravel between and under railway sleepers to compress the gravel and generate a safe substructure. Even today, maintenance personnel still have to manually locate the sleepers if they cannot be detected by computer vision systems or visually by the operator. Here we developed a first of its kind magnetic sleeper detector, even able to find sleepers, buried in gravel, undetectable by vision based systems. Our approach of magnetic detection is based on a DC magnetic field excitation and a detector moving with respect to the rail system, including the sleepers and fasteners for mounting the rails. Due to railway application constraints a large air gap between the sensor and the sleeper structure is required, which significantly complicates the magnetic sensing task for robust sleeper detection. The design and optimization of the magnetic circuit was based on extensive 3D simulation studies to ensure highest possible variation in magnetic flux density at the sensor locations for absence and presence of a sleeper. Furthermore, a low noise and high sensitivity electronic circuit has been realized to cope with sensor signal offsets from unknown or changing sensor orientations with respect to the earth’s magnetic field, or magnetic interferences from other trains potentially passing by during active measurements. Since we only want to detect sleepers in close vicinity of the moving sensor system, digital signal processing of the acquired signals can easily compensate for disturbing slowly changing or static field components within real world application scenarios. We demonstrate that magnetic detection of even buried sleepers on railway tracks is possible for distances of up to 172 mm between the sensor and the sleeper. This enables an even higher level of railway maintenance automation previously impossible in certain scenarios.

Study on dynamic and static magnetic properties of polycrystalline cobalt ferrite under bias magnetic field

Owing to their low resistivity, metal-based magnetostrictive materials are prone to eddy current loss under high-frequency magnetic field excitation, leading to a significant decline in output characteristics. Cobalt ferrite, a new non-metal-based magnetostrictive material, possesses both high magnetostriction strain and high resistivity, making it highly promising for high-frequency driving applications. However, reports on cobalt ferrite as the core driving material for ultrasonic transducers remain limited, and research on its high-frequency vibration characteristics is insufficient. In this study, magnetostrictive samples of cobalt ferrite were prepared using a solid-state reaction method, and their morphologies and magnetic properties were characterized. Under a bias magnetic field, the dynamic magnetic properties of cobalt ferrite and temperature variations with the driving magnetic field amplitude and prestress were analyzed. The results indicated that the density of the sample prepared by solid-state reaction can reach 88 % and the saturation magnetostriction coefficient λs can reach 186 × 10−6, with an optimal bias range of 400–600 Oe for the cobalt ferrite. When the driving magnetic field amplitude is 100 Oe in the optimal bias range, the output amplitude of the cobalt ferrite is 2160 nm, meeting the output requirement of high-frequency magnetostrictive ultrasonic transducers.

Magnetic interactions in the cooperative paramagnet Tb2Ti2O7

For about two decades, Tb2Ti2O7 has remained an enigma in condensed matter physics and frustrated magnetism. This material evades long-range order down to temperature as low as 20 mK, and, as in spin ice, its ground state exhibits puzzling diffuse magnetic scattering. To shed light on this issue, we present spin dynamics measurements by inelastic neutron scattering, which we confront with random phase approximation calculations (RPA) to determine exchange couplings capable of reproducing the dispersion of the first excited crystal electric field level. These couplings suggest that Tb2Ti2O7 lives at the boundary between several phases, in particular the spin ice and planar antiferromagnetic ones. Published by the American Physical Society 2024

Effects of honeycomb panel's finite dimensions on acoustic performance for lightweight sound insulation

A honeycomb panel is considered as a lightweight sound insulation solution both numerically and experimentally. First, a unit cell with fixed and infinite periodic conditions is modeled, exhibiting high insulation levels up to the membrane's eigenfrequency. Closer to industrial applications, a numerical model is developed, where the fixed conditions are applied only on the sides of the finite honeycomb panel. Taking into account structural modes of longer wavelength with this configuration, the panel's first eigenfrequency occurs at lower frequency than the previous case, yielding to a reduced insulation power. Nevertheless, the low frequency performance obtained numerically on the honeycomb panel is validated with measurements under normal incidence plane waves and diffuse field excitations.

A technology of multiple-harmonic magnetic field excitation and its signal-processing method for noncontact steel pipeline defect detection

A technology of multiple-harmonic magnetic field excitation and its signal-processing method for noncontact steel pipeline defect detection

Sound transmission loss of constrained layer damping composites featuring elastic plates embedded with acoustic black hole

This paper preliminarily investigates the influence of an elastic layer with an acoustic black hole (ABH) on the airborne sound insulation of a constrained layer damping (CLD) composite plate. ABHs represent a continuous impedance reduction in a local area of the structure, achieved by reducing material thickness. They efficiently dampen structure-borne sound in plate-like structures, resulting in excellent airborne sound attenuation performance. In the CLD composite structure, a damping layer is inserted between the elastic layers. This configuration achieves noise reduction and provides excellent airborne sound attenuation performance. By incorporating an ABH on one side of the elastic layer within the constrained damping composite structure and utilizing the damping layer as the terminal damping material for ABH, we achieve a lightweight structure with outstanding airborne sound insulation performance. Using finite element numerical calculations, we assess the airborne sound transmission loss of ABHs embedded within the CLD plate. Our analysis compares their transmission losses within the frequency range of 10 to 4000 Hz under normal-incidence and random incidence acoustic field excitations. While the ABH does not enhance the overall sound isolation performance of the CLD plate, it significantly improves the sound isolation dip at the resonance frequency.

Experimental and numerical investigation of the seismic behavior of reinforced concrete frames with restricted ductility

In recent decades, the concept of special ductility has been commonly used to design reinforced concrete frames to resist strong earthquakes. There are numerous situations where strong earthquakes impose restricted ductility demands, e.g., structures governed by gravity loads or wind loads rather than seismic loads, and frames with geometric properties such that the dimensions prevent formation of plastic hinges at the ends of beams. To evaluate performance of such structures, this study has been conducted and emphasis is placed on intermediate reinforced concrete frames with code-conforming details. Shake table tests are conducted on a 3-story intermediate frame under a sequence of 9 incremental excitation records varying from 0.10 g to 0.60 g, representing minor to severe ground motions. A relatively satisfactory performance is observed: the maximum interstory drift ratio does not exceed 1.57 %, cracks are not localized at the ends of members but distributed along the spans of both beams and columns, and joints remain almost uncracked. To examine the effects of different parameters, a numerical model is developed and verified against the test results. Three essential parameters are considered: seismic event profile, span-to-depth ratio of the beam, and joint aspect ratio. The results show that the effects of different factors may be ranked from highest to lowest as follows: seismic event profile, aspect ratio of the beam-column joint, and span-to-depth ratio of the beam. The numerical analyses show that the frame will not exceed life safety limit under far field excitations and for joint aspect ratios larger than 0.9, but it may reach the threshold of collapse prevention limit under near fault earthquakes. Overall, the study sheds some light on seismic response of RC frames with restricted ductility and provides some indications of their feasibility as well as their limits in high seismic zones.

The association of intraoperative electric field and neural excitation patterns of the cochlear implant with patient-related factors of age, gender, cochlear diameter, and postoperative speech measures

The association of intraoperative electric field and neural excitation patterns of the cochlear implant with patient-related factors of age, gender, cochlear diameter, and postoperative speech measures

Research on Spatial Localization Method of Magnetic Nanoparticle Samples Based on Second Harmonic Waves

Existing magnetic tracer detection systems primarily rely on fundamental wave signal acquisition using non-differential sensor configurations. These sensors are highly susceptible to external interference and lack tomographic localization capabilities, hindering their clinical application. To address these limitations, this paper presents a novel method for achieving the deep spatial localization of tracers. The method exploits second harmonic signal detection at non-zero field points. By considering the combined nonlinear characteristics of the coil’s axial spatial magnetic field distribution and the Langevin function, a correlation model linking the signal peak and bias field is established. This model enables the determination of the tracer’s precise spatial location. Building on this framework, a handheld device for localizing magnetic nanoparticle tracers was developed. The device harnesses the second harmonic response generated by coupling an AC excitation field with a DC bias field. Our findings demonstrate that under conditions of reduced coil turns and weak excitation fields, the DC bias field exhibits exclusive dependence on the axial distance of the detection point, independent of particle concentration. This implies that the saturated DC bias field corresponding to the second harmonic signal can be used to determine the magnetic nanoparticle sample detection depth. The experimental results validated the method’s high accuracy, with axial detection distance and concentration reduction errors of only 4.8% and 4.1%, respectively. This research paves the way for handheld probes capable of tomographic tracer detection, offering a novel approach for advancing magnetically sensitive biomedical detection technologies.

Catalysis in Extreme Field Environments: A Case Study of Strongly Ionized SiO2 Nanoparticle Surfaces.

High electric fields can significantly alter catalytic environments and the resultant chemical processes. Such fields arise naturally in biological systems but can also be artificially induced through localized nanoscale excitations. Recently, strong field excitation of dielectric nanoparticles has emerged as an avenue for studying catalysis in highly ionized environments, producing extreme electric fields. While the dynamics of laser-driven surface ion emission has been extensively explored, understanding the molecular dynamics leading to fragmentation has remained elusive. Here, we employ a multiscale approach performing nonadiabatic quantum molecular dynamics (NAQMD) simulations on hydrogenated silica surfaces in both bare and wetted environments under field conditions mimicking those of an ionized nanoparticle. Our findings indicate that hole localization drives fragmentation dynamics, leading to surface silanol dissociation within 50 fs and charge transfer-induced water splitting in wetted environments within 150 fs. Further insight into such ultrafast mechanisms is critical for the advancement of catalysis on the surface of charged nanosystems.

Properties Investigation and Damage Analysis of GaN Photoconductive Semiconductor Switch Based on SiC Substrate.

The GaN photoconductive semiconductor switches (PCSSs) with low leakage current and large on-state current are suitable for several applications, including fast switching and high-power electromagnetic pulse equipment. This paper demonstrates a high-power GaN lateral PCSS device. An output peak current of 142.2 A is reached with an input voltage of 10.28 kV when the GaN lateral PCSS is intrinsically triggered. In addition, the method of retaining the AlGaN/GaN heterostructure between electrodes on PCSSs is proposed, which results in increasing the output peak current of the PCSS. The damage mechanism of the PCSS caused by a high electric field and high excitation laser energy is analyzed. The obtained results show that the high heat generated by the large current leads to the decomposition of GaN, and thus, the Ga forms a metal conductive path, resulting in the failure of the device.