Free Fibula Flap Research Articles

Prosthetic rehabilitation in patients with jaw reconstruction by fibula free flap: A systematic review

This systematic review aimed to evaluate the dental prosthetic rehabilitation (DPR) in patients after jaw reconstruction with fibula free flap. Four databases were searched from January 2000 to January 2023. Of the 2507 studies identified, 36 observational studies were included. Cancer was the most common surgical indications for jawbone resection with 58.3 % of cases followed by benign tumours which representing 24 %. The DPR rate was estimated at 51.6 % across the studies (ranging from 38 % to 55 % depending on the benign or malignant nature of the tumors). Implant-supported prostheses represented 58.9 % of cases of which 66.9 % were fixed and 33.1 % were implant-stabilized overdentures. Virtual surgical planning (VSP) was used in 20 % of studies and aimed to improve the position of the grafted fibula, quality, and aesthetics of DPR and to decrease ischemia and the operating time. One in two authors performed DPR 12 months after jaw reconstruction. If implant survival rate reached 93 % in non-irradiated fibula, it fell to 38 %, 55 %, and 77 % if implantation occurred in the 12, 17, and 24 months after radiotherapy, respectively. Various parameters should be better investigated in further studies including the typology of the prostheses (implant-supported vs removable), the use of VSP, and the optimal time for DPR taking into account the characteristics of the tumor, the size of bone defect, and the need for external irradiation therapy

Dental prosthesis extraoral indexing and pick-up technique for mandibular full arch immediate rehabilitation in fibula free flap reconstruction.

Same-day ablative and reconstructive surgeries for the treatment of head and neck pathologies are gaining in popularity with the recognition that single-day surgeries reduce morbidity and increase quality of life. Implant-borne prosthetics on the donor graft provide immediate dental reconstruction. This report describes a novel technique for extraoral pickup of a full arch immediate prosthesis from the donor site free flap. This technique minimizes intraoperative occlusal adjustments, saves intraoperative time, prevents undesirable "rolling" of a fibula segment, and immediately rehabilitates patients with dental prosthetics. This article is protected by copyright. All rights reserved.

Virtual surgical planning for mandibular reconstruction in an abbreviated admission pathway

ObjectivesVirtual Surgical Planning (VSP) creates individualized surgical plans for free flap reconstruction of mandibular defects. Prior studies indicate that VSP can offer cost benefits due to reduced operative time and length of stay (LOS). We assessed the impact of VSP in the context of a validated postoperative abbreviated LOS clinical pathway. MethodsThis study assessed patients undergoing VSP vs conventional fibular free flap reconstruction for mandibular defects (12/2015–10/2020) and their operative time, ischemia time, and LOS were evaluated. ResultsForty-four patients underwent VSP reconstruction, while 52 patients underwent conventional reconstruction for mandibular defects. VSP was associated with significantly lower total operative time (6 h and 57 mins vs 7 h and 54 mins, p = 0.011), but not length of stay or ischemia time. Total OR time was significantly increased with increasing number of segments needed in both the VSP group (p = 0.002) and the conventional group (p = 0.015). ConclusionShorter operative times and LOS have been attributed to the use of VSP in free tissue transfers. It is argued that these reductions offset the added cost of VSP. Our study indicates that there is no cost benefit for VSP utilization due to a significantly reduced operative time with no impact on length of admission in an abbreviated admission clinical pathway following free tissue transfer.

Biomechanical evaluation of CAD/CAM magnesium miniplates as a fixation strategy for the treatment of segmental mandibular reconstruction with a fibula free flap

Titanium patient-specific (CAD/CAM) plates are frequently used in mandibular reconstruction. However, titanium is a very stiff, non-degradable material which also induces artifacts in the imaging. Although magnesium has been proposed as a potential material alternative, the biomechanical conditions in the reconstructed mandible under magnesium CAD/CAM plate fixation are unknown. This study aimed to evaluate the primary fixation stability and potential of magnesium CAD/CAM miniplates. The biomechanical environment in a one segmental mandibular reconstruction with fibula free flap induced by a combination of a short posterior titanium CAD/CAM reconstruction plate and two anterior CAD/CAM miniplates of titanium and/or magnesium was evaluated, using computer modeling approaches. Output parameters were the strains in the healing regions and the stresses in the plates. Mechanical strains increased locally under magnesium fixation. Two plate-protective constellations for magnesium plates were identified: (1) pairing one magnesium miniplate with a parallel titanium miniplate and (2) pairing anterior magnesium miniplates with a posterior titanium reconstruction plate. Due to their degradability and reduced stiffness in comparison to titanium, magnesium plates could be beneficial for bone healing. Magnesium miniplates can be paired with titanium plates to ensure a non-occurrence of plate failure.

Pedicled osteomyocutaneous pectoralis major flap with osseous rib harvest for salvage mandibular reconstruction: Case and technique.

In the era of free flap reconstruction, mandibular defects are routinely reconstructed with osseous free flaps, and non-free flap bony reconstruction options are limited. A patient with T4N0 mandibular squamous cell carcinoma underwent resection with fibula free flap reconstruction of a parasymphyseal to angle defect. After free flap failure due to venous congestion, the flap was explanted. He declined additional free flap reconstruction and elected to proceed with pedicled osteomyocutaneous pectoralis major with rib. In this case presentation, we discuss the technical details of harvest of this flap using the 6th rib. The pedicled osteomyocutaneous pectoralis major flap with osseous rib harvest, which is infrequently described in the literature, remains a viable option for bony reconstruction, particularly in the salvage setting.

Reconstruction of the anterior maxillary defect using a vascularized bone flap with residual teeth in the posterior maxilla.

Microsurgical bone reconstruction is challenging in cases of anterior maxillary defects because of the presence of residual teeth. The study analyzed the method and feasibility of using vascularized bone flaps to reconstruct anterior maxillary defects. We retrospectively analyzed 15 patients treated at the Department of Oral and Maxillofacial Surgery, Peking University School, and Hospital of Stomatology between November 2017 and January 2023. A total of 14 patients were successfully reconstructed using the digital technique: 6 deep circumflex iliac artery (DCIA) flaps and 8 fibular free flaps. Palatal and buccal pedicle paths were used in 4 and 10 cases, respectively, for vascular anastomosis. The implant coverage rates of the DCIA and fibular free flaps were 87.2% and 92.6%, respectively (p > 0.05). Anterior maxillary defects reconstructed with the DCIA and fibular free flaps are reliable methods. Furthermore, the palatal and buccal paths are recommended for vascular anastomosis.

Biomechanical behavior of the three-dimensionally printed surgical plates for mandibular defect reconstruction: a finite element analysis

The aim of the study was to investigate the biomechanical behavior of three-dimensionally (3D)-printed surgical plates used for mandibular defect reconstruction, compare them with conventional surgical plates, and provide experimental evidence for their clinical application. Three-dimensional models were created for the normal mandible and for mandibular body defects reconstructed using free fibula and deep circumflex iliac artery flaps. Three-dimensional finite element models of reconstructed mandibles fixed using 3D-printed and conventional surgical plates were established. Vertical occlusal forces were applied to the remaining teeth and the displacement and Von Mises stress distributions were studied using finite element analysis. The normal and reconstructed mandibles had similar biomechanical behaviors. The displacement distributions for the surgical plates were similar, and the maximum total deformation occurred at the screw hole of the anterior segment of the surgical plates. However, there were differences in the Von Mises stress distributions for the surgical plates. In reconstructed mandibles fixed using 3D-printed surgical plates, the maximum equivalent Von Mises stress occurred at the screw hole of the posterior segment, while in those fixed using conventional surgical plates, the maximum equivalent Von Mises stress was at the screw hole of the anterior segment. In the mandible models reconstructed with the same free flap but fixed with different surgical plates, the plates had similar biomechanical behaviors. The biomechanical behavior of 3D-printed surgical plates was similar to conventional surgical plates, suggesting that 3D-printed surgical plates used to reconstruct mandibular body defects with vascularized autogenous bone grafts could lead to secure and stable fixation.

Radiological landmark of syndesmotic ligament complex by magnetic resonance imaging correlate with fibula free flap harvesting procedure

Preservation of syndesmotic ligaments is crucial for preventing adverse sequelae at the donor site following free fibula osteocutaneous flap harvesting. This study sought to determine the relationship between distal tibiofibular ligaments and the fibular segment to identify radiological landmarks that facilitate safe and precise flap. The distances between the distal tibiofibular ligaments (anterior inferior tibiofibular ligament [AITFL], posterior inferior tibiofibular ligament [PITFL]) and the fibular segment, as well as the lower border of the interosseous membrane, were measured on magnetic resonance imaging (MRI) scans of 296 patients without any perceivable ankle abnormalities. The mean distances (± SD) between the distal end of the fibula and the AITFL, PITFL, and lower interosseous membrane border were 3.0 ± 0.4 cm, 2.6 ± 0.4 cm, and 3.9 ± 0.6 cm, respectively. The distance between the talar dome and the PITFL exhibited a range of 0.0–0.5 cm. Our findings support preserving a distal fibular remnant of at least 4 cm to avoid injury to the syndesmotic ligament throughout fibula osteocutaneous flap harvesting. The talar dome could serve as a useful radiological landmark for identifying the upper border of PITFL during preoperative evaluation, and thus facilitating precise and safe flap procurement.

Hemangioma of the Mandible in a 12-Year-Old Boy

Intraosseous hemangioma is a benign, rare neoplasm that accounts to 0.5 - 1% of all benign tumors of bones.1, 2 While most hemangiomas arise from soft tissues, it is uncommon for it to arise from bones.2 The most common sites of growth are in the vertebral body and the calvarium with frontal bone making up approximately 45% of calvarial cases.2,3 However, they are also encountered in the head and neck with sites such as the skull (53%), mandible (10.7%), nasal bones (9%), and cervical spine (6%).4 In the mandible, the body is mostly affected and 65% are found in the molar and premolar region.1 They are more common in adult females with peaks at the second and fifth decades of life.1-3 Hemangioma of the mandible is difficult to diagnose due to its nonspecific clinical presentation and radiographic features. It mimics various mass lesions in the mandible such as giant cell granuloma, fibrous dysplasia, multiple myeloma, osteosarcoma, ameloblastoma and keratocysts. Therefore, a comprehensive history taking and physical examination plus examination of the imaging studies available and tissue biopsy all play important roles in arriving at the final diagnosis.5 We present the case of an aggressive mandibular hemangioma in a young boy and our management involving a failed fibular free flap reconstruction.

Mandible Reconstruction in a Rural Population: Comparison of Radial Forearm and Free Fibula Flap Outcomes.

Comparison of microsurgical reconstructive options after mandible resection is limited in the literature. Fibula free flaps (FFFs) can be costly and have timing limitations, but dental restoration can be performed, with varied reported rates of completion. The radial forearm free flap (RFFF) with mandible plating may be an alternative in select populations. The purpose of this study was to determine if the RFFF has similar outcomes to the FFF for mandible reconstruction in a rural population. A retrospective review of patients who underwent mandibulectomy from 2017 to 2021 at a single tertiary-care academic institution was performed. Those with FFF or RFFF reconstruction were included. Mandible defects were classified using the Jewer-Boyd H-C-L system. Sixty-eight patients were included with 53 undergoing FFF and 15 undergoing RFFF. Immediate reconstruction was significantly more common with RFFF than FFF (100% versus 64.2%; P =0.01). Lateral mandible defects were most common among both groups (52.9% FFF versus 73.3% RFFF; P =0.04). Osseous defect length was similar (9.5cm FFF versus 7.7cm RFFF; P =0.07), but soft tissue defect size was significantly larger in the RFFF group (28.6cm 2 versus 15.3cm 2 ; P =0.01). Complication rates (47.1% FFF versus 46.7% RFFF; P =0.98) and disease-free status at last follow-up (96.2% FFF versus 80.0% RFFF; P =0.06) were similar. Dental restoration occurred in 21.3% of patients undergoing FFF. Patients undergoing RFFF or FFF reconstruction after mandibulectomy had similar surgical and disease outcomes, with a low rate of completed dental restoration after FFF. Our findings suggest RFFF is a reasonable alternative to FFF for mandible reconstruction in select patients.

Application of a modified osteotomy and positioning integrative template system (MOPITS) based on a truncatable reconstruction model in the precise mandibular reconstruction with fibula free flap: a pilot clinical study

BackgroundMandibular defects can greatly affect patients' appearance and functionality. The preferred method to address this issue is reconstructive surgery using a fibular flap. The current personalized guide plate can improve the accuracy of osteotomy and reconstruction, but there are still some problems such as complex design process and time-consuming. Therefore, we modified the conventional template to serve the dual purpose of guiding the mandible and fibula osteotomy and facilitating the placement of the pre-bent titanium.MethodsThe surgery was simulated preoperatively using Computer-Aided Design (CAD) technology. The template and truncatable reconstruction model were produced in the laboratory using 3D printing. After pre-bending the titanium plate according to the contour, the reconstruction model was truncated and the screw trajectory was transferred to form a modified osteotomy and positioning integrative template system (MOPITS). Next, the patient underwent a composite template-guided vascularized fibula flap reconstruction of the mandible. All cases were reviewed for the total operative time and accuracy of surgery.ResultsThe procedures involved 2–4 fibular segments in 15 patients, averaging 3 fibular segments per procedure. The osteotomy error is 1.01 ± 1.02 mm, while the reconstruction angular error is 1.85 ± 1.69°. The preoperative and postoperative data were compared, and both p > 0.05. During the same operation, implant placement was performed on four patients, with an average operative time of 487.25 ± 60.84 min. The remaining malignant tumor patients had an average operative time of 397.18 ± 73.09 min. The average postoperative hospital stay was 12.95 ± 3.29 days.ConclusionsThis study demonstrates the effectiveness of MOPITS in facilitating precise preoperative planning and intraoperative execution of fibula flap reconstruction. MOPITS represents a promising and reliable tool for reconstructive surgery, particularly for inexperienced surgeons navigating the challenges of mandible defect reconstruction.

Geometric Cuts by an Autonomous Laser Osteotome Increase Stability in Mandibular Reconstruction With Free Fibula Grafts: A Cadaver Study

BackgroundNon-union and plate exposure represent a major complication after mandibular reconstruction with free fibula flaps. These drawbacks may be resolved by geometric osteotomies increasing inter-segmental bone contact area and stability. PurposeThe aim of this study was to compare inter-segmental bone contact and stability of geometric osteotomies to straight osteotomies in mandibular reconstructions with free fibula grafts performed by robot-guided erbium-doped yttrium aluminum garnet laser osteotomy. Study design, setting, sampleThis cadaveric in-vitro study was performed on fresh frozen human skull and fibula specimens. CT-scans of all specimens were performed for virtual planning of mandibular resections and three-segment fibula reconstructions. The virtual planning was implemented in a Cold Ablation Robot-guided Laser Osteotome. Predictor/exposure/independent variableFor predictor variables straight and geometric puzzle-shaped osteotomies were designed at resection of the mandible and corresponding fibula reconstruction. Main outcome variablesThe primary outcome variable was the stability of the reconstructed mandible investigated by shearing tests. Moreover, secondary outcome variables were the duration of the laser osteotomies, the contact surface area and the accuracy of the reconstruction, both evaluated on post-surgical CT-scans. CovariatesCovariables were not applicable AnalysisData were reported as mean values (± standard deviation) and were statistically analyzed using an independent-sample t-test on a significance level of α = 0.05. Root mean square deviation was tested for accuracy. Results8 skulls and 16 fibula specimens were used for the study. 112 successful laser osteotomies (96 straight and 16 geometrical) could be performed. Geometric osteotomies increased stability (110.2±36.2 N vs. 37.9±20.1N, p<0.001) compared to straight osteotomies. Geometric osteotomy of the fibula took longer than straight osteotomies (10.9±5.1min vs. 5.9±2.2min, p=0.028), but could provide larger contact surface (431.2±148.5mm2 vs. 226.1±50.8mm2, p=0.04).Heat map analysis revealed a mean deviation between preoperational planning and post-reconstructive CT-scan of -0.8 ±2.4mm and a root mean square deviation of 2,51mm. ConclusionMandibular resection and reconstruction by fibula grafts can accurately be performed by a cold ablation robot-guided laser osteotome without need for cutting guides. Osteotomy planning with geometric cuts offers higher stability and an increased bone contact area which may enhance healing of the reconstructed mandible.

Clinical outcomes and periodontal conditions of dental implants placed in free fibula flaps (FFF): a retrospective study with a mean follow-up of 6 years

ObjectivesUp-to-date literature regarding long-term success of implant rehabilitations after microvascular reconstructions with free fibula flap (FFF) is still very scarce. This study aimed to evaluate clinical outcomes, especially related to oral hygiene conditions, of patients rehabilitated with this technique.Materials and methodsA total of 25 patients who underwent maxillofacial reconstructive surgery with FFF were retrospectively evaluated for soft tissues conditions, oral hygiene habits, and implant survival and success, assessed with a mean follow-up of 6 (range 2–15) years after loading.ResultsFourteen patients received full-arch fixed prostheses and 11 removable bar-supported overdentures. At the follow-up evaluation, 52% of prostheses did not allow proper accessibility for oral hygiene. Overall prosthetic survival was 100%, and implant survival and success were respectively 93.6% and 72%. Prevalence of peri-implantitis was 29% at implant level and that at patient level 96%.ConclusionsSix-year clinical outcomes of this study reveal that poor oral hygiene practices and compliance by patients who underwent maxillofacial reconstruction with FFF are significantly associated with peri-implant disease.Clinical relevanceFindings of the present study underline the need by clinicians for a careful assessment, in reference to a specific implant therapy, of patient’s prosthetic accessibility for oral hygiene procedures.

Introduction and preliminary application report for a novel 3D printed perforator navigator for fibular flap surgery

The aim of this study was to introduce and report on a 3D-printed perforator navigator and its clinical application.Integrated imaging and 3D printing techniques were employed for the design and manufacture of a perforator navigator. Key techniques included establishing a digital image coordinate system, localizing perforator fascia piercing points, creating a reference plane for the perforator course, and projecting the perforator course onto the body surface.All cases of maxillofacial defect repaired with free fibular myocutaneous flaps, from January 2019 to January 2022, were reinvestigated. Patients treated using traditional perforator localization methods were assigned into group Ⅰ, while those who had a navigator used during treatment were allocated to group Ⅱ. Outcome measurements included perforator positioning accuracy, perforator preparation time (PT), and flap growth score. Capillary refilling time and degree of flap swelling were recorded on the 1st, 3rd, and 7th days after surgery. On the 10th day after surgery, the flap survival situation was graded.In total, 25 patients were included in the study. Perforator preparation time for group Ⅱ was significantly less (p ＝ 0.04) than for group Ⅰ (1038.6 ± 195.4 s versus 1271.4 ± 295.1 s. In group Ⅱ, the mean positioning deviation for the perforator navigator was 2.12 cm less than that for the high-frequency color Doppler (p ＝ 0.001). Group Ⅱ also had a higher score than group Ⅰ for overall flap growth evaluation (nonparametric rank sum test, p ＝ 0.04).Within the scale of the study, it seems that perforator localization and navigation using a 3D-printed navigator is technically feasible, and helps to improve the clinical outcome of free fibular flaps. The perforator navigator will play a useful role in displaying the perforator course, improving the accuracy of perforator localization, reducing surgical injury, and ultimately enhancing flap success rate.

Toronto extremity salvage score-patient reported outcome measures in upper extremity bone tumors treated with limb salvage surgery

Bone and soft tissue tumors of upper extremity are relatively uncommon than those of lower limb. Treating these patients while retaining a functional limb is quite a challenge. Along with musculoskeletal tumor society score, Toronto extremity salvage score (TESS) is most widely used patient-reported outcome measure for sarcomas of upper extremity. Retrospective analysis of patients with upper extremity bone tumors (24) treated with limb salvage surgery (20) from 2014 to 2022 was undertaken. Mean follow-up period was 26 months and mean age was 30.2 years. Out of 20, 11 humerus cases were of tumors arising from humerus, 5 in radius and 3 in ulna. 9 patients were treated with custom mega prosthesis reconstruction, 6 with fibular free flap, 6 radius underwent simple resection and 1 curettage. Majority of the cases were giant cell tumors (8) followed by osteosarcoma (3), fibromatosis (3), aneurysmal bone cyst (2), simple bone cyst (2), 1 Ewing sarcoma and 1 metastatic bone disease. The mean TESS score of the sample population was 69.7 Most of the patients (11) rated their disability to be of moderate degree and considered themselves to be moderately disabled. The mean TESS score for CMP group was 71.1, while that of autograft reconstruction was 68.3. Despite only half the population having received CMP as a reconstructive option, nearly 40% patients with disease of forearm where the results are not so great, our study population reported a reasonably good patient reported outcome score. A dedicated physiotherapy team with tailor made exercise protocol for each patient depending on their needs can help in improving the quality of life.

The Use of Free Fibula Flap in Different Extremities and Our Clinical Results.

Background and objectives Plastic, orthopedic, otolaryngology, and oromaxillofacial surgery specialists rely on fibula grafts to solve reconstructive problems. The aim of this study is to discuss the use and results of vascular fibula flaps in the treatment of bone and soft tissue defects in various regions with different etiologies. Materials and methods In our clinic, we treated 32 patients with osteocutaneous fibular flaps due to bone and soft tissue defects of different etiologies and varying anatomical regions. In our study, age, gender, side, cause of injury, surgical technique, treatment results, and complications were evaluated for each patient. Results Of the 32 patients, 25 were male, and 7 were female. The average age is 37.2 (27-56). The mean bone defect size was 10.45 cm. Bone defect occurred in eight patients due to osteomyelitis, eleven patients due to gunshot wounds, nine patients due to pseudoarthrosis, and four patients due to a giant cell tumor. We applied osteocutaneous fibula flap in 27 patients and vascularized fibular flap in five patients. Bone union could not be achieved in four patients, and bone grafting was performed as a secondary surgery. Local infection occurred in five patients, and their treatment was completed with debridement and antibiotic administration. Wound complications occurred in three patients at the donor site, which were treated with debridement and skin grafting. The mean duration of radiological union was three months, and complete union was achieved in the seventh month. Conclusions We have shown in our case series that free vascularized fibula transfer has gained an important place in the field of skeletal reconstruction and is a reliable method for various bone reconstructions.

Considerations for the Use of Alloplastic Temporomandibular Joint Replacement in Irradiated Patients: Report of an Off-Label Indication.

Custom-made alloplastic temporomandibular joint replacement (ATMJR) is not validated in irradiated patients. However, in specific situations, after previous reconstructive surgical failures, the authors hypothesized the role of a customized ATMJR after radiotherapy. A 65-year-old male patient was referred to Instituto Português da Face-Lisbon, Portugal-after failed attempts of mandibular reconstruction secondary to oral carcinoma resection and partial hemi-mandibulectomy plus radiotherapy of 60 total Grays. Primary reconstruction was performed with fibula free flap. Due to failure, secondary reconstructions were performed with osteosynthesis plate without success. The patient was unable to have adequate mastication and deglutition due to a severe crossbite. The authors treated the patient with an extended customized alloplastic temporomandibular joint replacement (F0M2). With 3 years of follow-up, the patient showed an improvement in masticatory function, mandibular motion, pain levels, and overall quality of life. No complications were observed related to ATMJR. The presented case described how ATMJR, although not a validated option after radiotherapy, can be considered to restore functionality in complex cases with bone and soft tissues problems.

Biomechanical feasibility of non-locking system in patient-specific mandibular reconstruction using fibular free flaps

Mandibular reconstruction with free fibular flaps is frequently used to restore segmental defects. The osteosythesis, including locking and non-locking plate/screw systems, is essential to the mandibular reconstruction. Compared with the non-locking system that requires good adaption between plate and bone, the locking system appears to present a better performance by locking the plate to fixation screws. However, it also brings about limitations on screw options, a higher risk of screw failure, and difficulties in screw placement. Furthermore, its superiority is undermined by the advancing of patient-specific implant design and additive manufacturing. A customized plate can be designed and fabricated to accurately match the mandibular contour for patient-specific mandibular reconstruction. Consequently, the non-locking system seems more practicable with such personalized plates, and its biomechanical feasibility ought to be estimated. Finite element analyses of mandibular reconstruction assemblies were conducted for four most common segmental mandibular reconstructions regarding locking and non-locking systems under incisal biting and right molars clenching, during which the influencing factor of muscles’ capacity was introduced to simulate the practical loadings after mandibular resection and reconstruction surgeries. Much higher, somewhat lower, and similar maximum von Mises stresses are separately manifested by the patient-specific mandibular reconstruction plate (PSMRP), fixation screws, and reconstructed mandible with the non-locking system than those with the locking system. Equivalent maximum displacements are identified between PSMRPs, fixation screws, and reconstructed mandibles with the non-locking and locking system in all four reconstruction types during two masticatory tasks. Parallel maximum and minimum principal strain distributions are shared by the reconstructed mandibles with the non-locking and locking system in four mandibular reconstructions during both occlusions. Conclusively, it is feasible to use the non-locking system in case of patient-specific mandibular reconstruction with fibular free flaps based on the adequate safety, comparable stability, and analogous mechanobiology it presents compared with the locking system in a more manufacturable and economical way.

Fibula free flap for mandibular reconstruction following total en bloc resection in ameloblastoma: a case report and literature review

Background: The fibular free flap is considered the gold standard in mandibular bone reconstruction. It has a high survival rate, is well-vascularized, and fits seamlessly into long-bone defects. The purpose of this article is to describe the use of vascularized fibular free flap in mandibular reconstruction after total en bloc resection in case of ameloblastoma suspected of repeated trauma to the mandible. Method: A case report of a 26-year-old patient undergoing a mandibular reconstruction using fibula osteocutenous free flap following total en bloc resection due to ameloblastoma on mandibular symphisis region was monitored using Doppler ultrasound every 15 minutes for three to five days. Result: Within four months of treatment, the patient had improved, and the graft was found to be viable. Conclusion: The severity and size of the affected tissue, the tumour's histological arrangement, and the consequences were the influence of whether or not ameloblastoma patients should require surgery. To determine the best course of treatment for each individual case of ameloblastoma, an accurate clinical examination and image evaluation are required.

Extraskeletal Myxoid Chondrosarcoma of Floor of Mouth-A Rare Case Report and Review of Literature.

Chondrosarcomas are rare malignancies of the cartilage and myxoid chondrosarcoma is its variant which commonly occurs in soft tissue of extremities. Extraskeletal chondrosarcoma is a rare malignant neoplasm of bone or soft tissue origin and is characterized by the presence of spindle cells admixed with well differentiated cartilage or chondroid stroma. They are mostly radioresistant tumours and surgical resections with adequate margins is considered as the ideal treatment modality with adjuvant radiotherapy in high grade tumours and add on chemotherapy, in case of presence of poor prognostic factors. A 51-year-old diabetic, hypertensive female patient presented to our outpatient department with difficulty in chewing food for a duration of 6 months. On clinical examination, she had an ulceroproliferative growth involving right lower alveolus and floor of mouth. MRI face and neck with contrast showed a 4.1 × 2.9 × 4.5cm lesion involving right lower alveolus extending to floor of mouth. Biopsy showed features of extraskeletal myxoid chondrosarcoma. She was planned for upfront surgery (Right composite resection with modified radical neck dissection with free fibula flap). Patient was stable post-surgery and was discharged in stable condition. Final histopathology report was high grade myxoid chondrosarcoma. The case was presented in tumour board and the patient was planned for adjuvant radiotherapy. She has been on regular follow up for the past 2 years and shows no signs of recurrence. Extraskeletal myxoid chondrosarcoma of oral cavity is a rare entity and very few cases are reported. It is a malignant neoplasm which is diagnosed with the help of immunohistochemistry. Surgery is the ideal modality of treatment accompanied by adjuvant radiotherapy in cases of high-grade tumours.