Fibrous Scaffolds Research Articles

Neuro-regenerative behavior of adipose-derived stem cells in aligned collagen I hydrogels.

Peripheral nerve injuries persist as a major clinical issue facing the US population and can be caused by stretch, laceration, or crush injuries. Small nerve gaps are simple to treat, and the nerve stumps can be reattached with sutures. In longer nerve gaps, traditional treatment options consist of autografts, hollow nerve guidance conduits, and, more recently, manufactured fibrous scaffolds. These manufactured scaffolds often incorporate stem cells, growth factors, and/or extracellular matrix (ECM) proteins to better mimic the native environment but can have issues with homogenous cell distribution or uniformly oriented neurite outgrowth in scaffolds without fibrous alignment. Here, we utilize a custom device to fabricate collagen I hydrogels with aligned fibers and encapsulated adipose-derived mesenchymal stem cells (ASCs) for potential use as a peripheral nerve repair graft. Initial results of our scaffold system revealed significantly less cell viability in higher collagen gel concentrations; 3mg/mL gels showed 84.8±7.3% viable cells, compared to 6mg/mL gels viability of 76.7±9.5%. Mechanical testing of the 3mg/mL gels showed a Young's modulus of 6.5±0.8kPa nearly matching 7.45kPa known to support Schwann cell migration. Further analysis of scaffolds coupled with stretching in vitro revealed heightened angiogenic and factor secretion, ECM deposition, fiber alignment, and dorsal root ganglia (DRG) neurite outgrowth along the axis of fiber alignment. Our platform serves as an in vitro testbed to assess neuro-regenerative potential of ASCs in aligned collagen fiber scaffolds and may provide guidance on next-generation nerve repair scaffold design.

The Effects of Fibroblast Growth Factor-2 (FGF-2) on Achilles Tendon Injury

Category: Basic Sciences/Biologics; Ankle Introduction/Purpose: Achilles tendon defects are a challenging problem, and there is a need for new treatments. We investigated the use of Platelet-rich fibrin (PRF), a dense fibrin scaffold containing many growth factors and cytokines, for Achilles tendon injuries. The study found that PRF accelerates healing by promoting the proliferation and activation of tenocytes via FGF receptor/AKT signaling and TGF-β/SMAD3 signaling. While FGF-2, a growth factor in PRF, has been shown to promote tenocyte differentiation and proliferation, its effect on Achilles tendon injuries has not been reported. Therefore, this study aimed to investigate the effect of FGF-2 on Achilles tendon healing when administered alone and to determine its specific contribution to the healing process. Methods: We used a rat model of Achilles tendon defect. A 4-mm portion of the right Achilles tendon, 4 mm proximal to the calcaneal insertion, was resected to create a tendon defect. Gelatin hydrogel sheet (MedGel PI5) as a scaffold for PBS, FGF-2 (Rigroth®), and FGF receptor inhibitor (FGFRI: Pemigatinib) was placed into the gap before suturing it with nylon sutures. We observed HE-stained specimens at 200x and assessed histological healing by counting cells and vessels and grading cell morphology. The motor function was evaluated by the Basso, Beattie, and Bresnahan (BBB) score and the treadmill test. We compared the effects of FGF-2 on tenocytes isolated from rat Achilles tendons in the control, FGF2, and FGFRI groups. The proliferation and migration of tenocytes were measured by MTS assay and wound closure assay, respectively. Protein expression, such as Tenomodulin (Tnmd), Collagen Ⅰ, Ⅲ, and Screlaxis-A in cells, were evaluated by Western Blotting. Results: In the rat model, the number of cells, vessels and cell morphology scores at the defect sites increased in the FGF-2 group and decreased in the FGFRI group at 2 and 4 weeks postoperatively. In the motor functional evaluation, the FGF-2 group showed earlier improvement in the BBB score and the treadmill test compared to the control and FGFRI groups. The MTS assay showed that the number of viable cells was higher in the FGF-2 group and lower in the FGFRI group than in the control. Wound closure assay showed tenocyte migration was increased in the FGF-2 group and decreased in the FGFRI group. Regarding protein expression, Tnmd, Collagen I, III, and Screlaxis-A were increased in the FGF-2 group and decreased in the FGFRI group. Conclusion: In vivo, FGF-2 promoted healing of Achilles tendon injury, and FGFRI impeded it in terms of motor function and histology. Additionally, in vitro, FGF-2 promoted the proliferation and migration of tenocytes and enhanced extracellular matrix production, while FGFRI diminished these effects. Although native FGF-2 is produced at the injured site, further administration of FGF-2 accelerated Achilles tendon injury healing, while inhibiting the FGF receptor delayed recovery in this study. Therefore, FGF- 2 is very important in Achilles tendon injury healing and may promote recovery by enhancing angiogenesis, proliferation, and extracellular matrix production of tenocytes.

Geometric Angles and Gene Expression in Cells for Structural Bone Regeneration.

Geometry and angles play crucial roles in cellular processes; however, its mechanisms of regulation remain unclear. In this study, a series of three dimensional (3D)-printed microfibers with different geometries is constructed using a near-field electrostatic printing technique to investigate the regulatory mechanisms of geometry on stem cell function and bone regeneration. The scaffolds precisely mimicked cell dimensions with high porosity and interoperability. Compared with other spatial topography angles, microfibers with a 90° topology can significantly promote the expression of osteogenic gene proteins in bone marrow-derived mesenchymal stem cells (BMSCs). The effects of different spatial structures on the expression profiles of BMSCs differentiation genes are correlated and validated using microRNA sequencing. Enrichment analysis shows that the 90° microfibers promoted osteogenesis in BMSCs by significantly upregulating miR-222-5p/cbfb/Runx2 expression. The ability of the geometric architecture to promote bone regeneration, as assessed using the cranial defect model, demonstrates that the 90° fiber scaffolds significantly promote new bone regeneration and neovascular neural network formation. This study is the first to elucidate the relationship between angular geometry and cellular gene expression, contributing significantly to the understanding of how geometric architecture can promote stem cell differentiation, proliferation, and function for structural bone regeneration.

A bioinspired synthetic fused protein adhesive from barnacle cement and spider dragline for potential biomedical materials

Biomaterials with excellent biocompatibility, mechanical performance, and self-recovery properties are urgently needed for tissue regeneration. Inspired by barnacle cement and spider silk, we genetically designed and overexpressed a fused protein (cp19k-MaSp1) composed of Megabalanus rosa (cp19k) and Nephila clavata dragline silk protein (MaSp1) in Pichia pastoris. The recombinant cp19k-MaSp1 exhibited enhanced adhesion capability beyond those of the individual proteins in both aqueous and non-aqueous conditions. cp19k-MaSp1 protein fiber scaffolds prepared through electrospinning have adequate hydrophilicity compared to cp19k and MaSp1 protein fiber scaffolds, and offer improved overall porosity compared to MaSp1 protein fiber scaffolds. The cp19k-MaSp1 protein fiber scaffolds showed excellent proteolytically stable properties because of only 9.6 % depletion after incubation in a biodegradation solution for 56 d. The cp19k-MaSp1 protein fiber scaffolds present remarkably high extreme tensile strength (112.7 ± 11.6 MPa) and superior ductility (438.4 ± 43.9 %) compared with cp19k (34.4 ± 8.1 MPa, 115.4 ± 32.7 %) and MaSp1 protein fiber scaffolds (65.8 ± 9.3 MPa, 409.6 ± 23.1 %), also 68.4 % of tensile strength was recovered by incubation in K+ buffer after multiple stretches, which create a favorable cell adhesion, growth, and proliferation environment for human umbilical vein endothelial cells (HUVECs). The improved biocompatibility, extensive adhesion, mechanical strength, and self-recovery properties make the bioinspired synthetic cp19k-MaSp1 a potential candidate for biomedical tissue reconstruction.

Preparation and Characterization of Poliglecaprone-Incorporated Polycaprolactone Composite Fibrous Scaffolds

Electrospun fibrous scaffolds made from polymers such as polycaprolactone (PCL) have been used in drug delivery and tissue engineering for their viscoelasticity, biocompatibility, biodegradability, and tunability. Hydrophobicity and the prolonged degradation of PCL causes inhibition of the natural tissue-remodeling processes. Poliglecaprone (PGC), which consists of PCL and Poly (glycolic acid) (PGA), has better mechanical properties and a shorter degradation time compared to PCL. A blend between PCL and PGC called PPG can give enhanced shared properties for biomedical applications. In this study, we fabricated a blend of PCL and PGC nanofibrous scaffold (PPG) at different ratios of PGC utilizing electrospinning. We studied the physicochemical and biological properties, such as morphology, crystallinity, surface wettability, degradation, surface functionalization, and cellular compatibility. All PPG scaffolds exhibited good uniformity in fiber morphology and improved mechanical properties. The surface wettability and degradation studies confirmed that increasing PGC in the PPG composites increased hydrophilicity and scaffold degradation respectively. Cell viability and cytotoxicity results showed that the scaffold with PGC was more viable and less toxic than the PCL-only scaffolds. PPG fibers were successfully coated with polydopamine (PDA) and collagen to improve degradation, biocompatibility, and bioactivity. The nanofibrous scaffolds synthesized in this study can be utilized for tissue engineering applications such as for regeneration of human articular cartilage regeneration and soft bones.

Work-Function-Induced Interfacial Electron/Ion Transport in Carbon Hosts toward Dendrite-Free Lithium Metal Anodes.

Coupled electron/ion transport is a decisive feature of Li plating/stripping, wherein the compatibility of electron/ion transport rates determines the morphology of deposited Li. Local Li+ hotspots form due to inhomogeneous interfacial charge transfer and lead to uncontrolled Li deposition, which decreases the Li utilization rate and safety of Li metal anodes. Herein, we report a method to obtain dendrite-free Li metal anodes by driving electron pumping and accumulating and boosting Li ion diffusion by tuning the work function of a carbon host using cobalt-containing catalysts. The results reveal that increasing the work function provides an electron deviation from C to Co, and electron-rich Co shows favorable binding to Li+ . The Co catalysts boost Li+ diffusion on the carbon fiber scaffolds without local aggregation by reducing the Li+ migration barrier. The as-obtained dendrite-free Li metal anode exhibits a Coulombic efficiency of 99.0 %, a cycle life of over 2000 h, a Li utilization rate of 50 %, and a capacity retention of 83.4 % after 130 cycles in pouch cells at a negative/positive capacity ratio of 2.5. These findings provide a novel strategy to stabilize Li metal by regulating the work function of materials using electrocatalysts.

Work‐Function‐Induced Interfacial Electron/Ion Transport in Carbon Hosts toward Dendrite‐Free Lithium Metal Anodes

AbstractCoupled electron/ion transport is a decisive feature of Li plating/stripping, wherein the compatibility of electron/ion transport rates determines the morphology of deposited Li. Local Li+ hotspots form due to inhomogeneous interfacial charge transfer and lead to uncontrolled Li deposition, which decreases the Li utilization rate and safety of Li metal anodes. Herein, we report a method to obtain dendrite‐free Li metal anodes by driving electron pumping and accumulating and boosting Li ion diffusion by tuning the work function of a carbon host using cobalt‐containing catalysts. The results reveal that increasing the work function provides an electron deviation from C to Co, and electron‐rich Co shows favorable binding to Li+. The Co catalysts boost Li+ diffusion on the carbon fiber scaffolds without local aggregation by reducing the Li+ migration barrier. The as‐obtained dendrite‐free Li metal anode exhibits a Coulombic efficiency of 99.0 %, a cycle life of over 2000 h, a Li utilization rate of 50 %, and a capacity retention of 83.4 % after 130 cycles in pouch cells at a negative/positive capacity ratio of 2.5. These findings provide a novel strategy to stabilize Li metal by regulating the work function of materials using electrocatalysts.

Cryo-Electrospinning Generates Highly Porous Fiber Scaffolds Which Improves Trabecular Meshwork Cell Infiltration.

Human trabecular meshwork is a sieve-like tissue with large pores, which plays a vital role in aqueous humor outflow. Dysfunction of this tissue can occur, which leads to glaucoma and permanent vision loss. Replacement of trabecular meshwork with a tissue-engineered device is the ultimate objective. This study aimed to create a biomimetic structure of trabecular meshwork using electrospinning. Conventional electrospinning was compared to cryogenic electrospinning, the latter being an adaptation of conventional electrospinning whereby dry ice is incorporated in the fiber collector system. The dry ice causes ice crystals to form in-between the fibers, increasing the inter-fiber spacing, which is retained following sublimation. Structural characterization demonstrated cryo-scaffolds to have closer recapitulation of the trabecular meshwork, in terms of pore size, porosity, and thickness. The attachment of a healthy, human trabecular meshwork cell line (NTM5) to the scaffold was not influenced by the fabrication method. The main objective was to assess cell infiltration. Cryo-scaffolds supported cell penetration deep within their structure after seven days, whereas cells remained on the outer surface for conventional scaffolds. This study demonstrates the suitability of cryogenic electrospinning for the close recapitulation of trabecular meshwork and its potential as a 3D in vitro model and, in time, a tissue-engineered device.

Magnetically-activated, nanostructured cellulose for efficient capture of circulating tumor cells from the blood sample of head and neck cancer patients

In this report, the relative efficiency of cellulose nanocrystals (CNCs) and nanofibers (CNFs) to capture circulating tumor cells (CTCs) from the blood sample of head and neck cancer (HNC) patients was evaluated. Detection and enumeration of CTCs are critical for monitoring cancer progression. Both types of nanostructured cellulose were chemically modified with Epithelial Cell Adhesion Molecule (EpCAM) antibody and iron oxide nanoparticles. The EpCAM antibody facilitated the engagement of CTCs, promoting entrapment within the cellulose cage structure. Iron oxide nanoparticles, on the other hand, rendered the cages activatable via the use of a magnet for the capture and separation of entrapped CTCs. The efficiency of the network structures is shown in head and neck cancer (HNC) patients' blood samples. It was observed that the degree of chemical functionalization of hydroxyl groups located within the CNCs or CNFs with anti-EpCAM determined the efficiency of the system's interaction with CTCs. Further, our result indicated that inflexible scaffolds of nanocrystals interacted more efficiently with CTCs than that of the fibrous CNF scaffolds. Network structures derived from CNCs demonstrated comparable CTC capturing efficiency to commercial standard, OncoDiscover®. The output of the work will provide the chemical design principles of cellulosic materials intended for constructing affordable platforms for monitoring cancer progression in ‘real time’.

Mechanisms underlying the cell-matrixed nerve grafts repairing peripheral nerve defects

Decellularized extracellular matrix (dECM), with its distinct biological properties, has gained significant attention as a natural biomaterial. Leveraging its potentials, we successfully developed a three-dimensional matrix-based oriented nerve graft by encapsulating a fibrous scaffold with multilayered conformationally intact and biologically active human bone marrow mesenchymal stem cell-derived decellularized extracellular matrix (hBMSC-dECM). Convincingly, the hBMSC-dECM group exhibited comparable functional recoveries to the autograft group by postoperative week 12. In the comprehensive analysis, the molecular regulations in the hBMSC-dECM group were more intricate and nuanced compared to the autograft group. Nevertheless, both groups displayed similar molecular regulatory processes in terms of vascularization and extracellular matrix. Notably, the hBMSC-dECM group demonstrated sustained high levels of regulation in axon and myelin regeneration at week 12, while the immunomodulation returned to the normal levels after peaking at week 2. Collectively, our findings illustrated the satisfactory construction of a cell-matrixed nerve graft that established a microenvironment conducive to nerve regeneration, and elucidated the distinct molecular regulation patterns and characteristics associated with different repair modes.

A novel biomimetic nanofibrous cardiac tissue engineering scaffold with adjustable mechanical and electrical properties based on poly(glycerol sebacate) and polyaniline

Biomaterial tissue engineering scaffolds play a critical role in providing mechanical support, promoting cells growth and proliferation. However, due to the insulation and inappropriate stiffness of most biomaterials, there is an unmet need to engineer a biomimetic nanofibrous cardiac tissue engineering scaffold with tailorable mechanical and electrical properties. Here, we demonstrate for the first time the feasibility to generate a novel type of biocompatible fibrous scaffolds by blending elastic poly(glycerol sebacate) (PGS) and conductive polyaniline (PANI) with the help of a nontoxic carrier polymer, poly (vinyl alcohol) (PVA). Aligned and random PGS/PANI scaffolds are successfully obtained after electrospinning, cross-linking, water and ethanol wash. Incorporating of different concentrations of PANI into PGS fibers, the fibrous sheets show enhanced conductivity and slower degradation rates while maintaining the favorable hemocompatibility. The elastic modulus of the PGS/PANI scaffolds is in the range of 0.65–2.18 MPa under wet conditions, which is similar to that of natural myocardium. All of these fibrous mats show good cell viability and were able to promote adhesion and proliferation of H9c2 cells. Furthermore, the in vivo host responses of both random and aligned scaffolds confirm their good biocompatibility. Therefore, these PGS/PANI scaffolds have great potential for cardiac tissue engineering.

The Extraction of Keratin from Human Hair Waste for Copolymerization with Nitrile Butadiene Rubber

Human hair contains a rich source of a fibrous protein called α-keratin. Due to keratin’s intrinsic ability to self-assemble and polymerize into porous, fibrous scaffolds and reproducible architecture, dimensionality, and porosity, its biomedical application has become widespread. However, the extraction of keratin from hair proves challenging and ineffective, hindered by its disulfide bonds. The purpose of this research is to explore a relatively simple procedure to extract keratin from hair waste and fuse it with NBR in hopes of enhancing its mechanical properties and improving its biodegradation. Keratin’s non-covalent bonds were broken using mechanical disruption by a grinder. Hair keratin is then extracted via solubilization by utilizing sodium chloride. The alkaline hydrolysis method, a simple, cheap, and time-affordable method, is explored with different concentrations of NaOH. Then, the recovered keratin from each solution is mixed with dissolved NBR (Nitrile Butadiene Rubber), a well-known rubber used for a variety of purposes, such as the construction of hoses, belts, sealing parts, oil seals, oil wells, and shoe soles. A series of tests on the mechanical properties of the keratin-filled NBR samples were then tested, such as tensile strength, elongation at break, hardness, and elasticity. 10g NaOH/100mL solution yielded the highest amount of keratin, with the addition of keratin from the same solution in NBR enhancing the mechanical properties the most, although only modest. Additionally, the inclusion of keratin in NBR improves its biodegradability.

A mist-based crosslinking technique for coaxial bioprinting of hollow hydrogel fibers

In this paper, a mist-based method for coaxial three-dimensional bioprinting of ionically crosslinking hydrogel hollow fibers is presented. Unlike current techniques of coaxial bioprinting that utilize the crosslinker in liquid or sacrificial form, the developed method introduces the core crosslinking agent in mist form. The use of mist as a core flow provides adequate pressure and sufficient crosslinking to maintain the tubular shape of a hollow fiber. Through controlled exposure of crosslinker, the developed system prevents poor resolution and layer adhesion caused by the accumulation of liquid crosslinker on the printbed. Furthermore, it eliminates additional processing steps, such as partial crosslinking of the hydrogel prior- or removal of sacrificial material post-printing. The printability and mechanical properties of hollow fiber scaffolds printed using various mist and hydrogel concentrations are studied. It is shown that mist concentration influences the gelation rate of the hollow fiber, impacting the shape fidelity, layer adhesion, and mechanical properties of the printed structures. Moreover, the effects of printing parameters, including the mist core pressure and hydrogel flowrate, on the diameter and wall thickness of the hollow fiber are investigated. Finally, scaffolds printed and crosslinked using mist exhibit over 90% cell viability. The developed mist-based coaxial system enables direct printing of continuous hollow fibers.

Aligned Electroactive Electrospun Fibrous Scaffolds for Peripheral Nerve Regeneration.

Effective repair and functional recovery of large peripheral nerve deficits are urgent clinical needs. A biofunctional electroactive scaffold typically acts as a "bridge" for the repair of large nerve defects. In this study, we constructed a biomimetic piezoelectric and conductive aligned polypyrrole (PPy)/polydopamine (PDA)/poly-l-lactic acid (PLLA) electrospun fibrous scaffold to improve the hydrophilicity and cellular compatibility of PLLA and restore the weakened piezoelectric effect of PDA, which is beneficial in promoting Schwann cell differentiation and dorsal root ganglion neuronal extension and alignment. The aligned PPy/PDA/PLLA fibrous scaffold bridged the sciatic nerve of Sprague-Dawley rats with a 10 mm deficit, prevented autotomy, and promoted nerve regeneration and functional recovery, thereby activating the calcium and AMP-activated protein kinase signaling pathways. Therefore, electroactive fibrous scaffolds exhibit great potential for neural tissue regeneration.

Bletilla striata composite nanofibrous membranes prepared by emulsion electrospinning for enhanced healing of diabetic wounds.

Diabetic wounds impose enormous distress and financial burden on patients, and finding effective dressings to manage wounds is critical. As a Chinese herbal medicine with a long history of Clinical application, Bletilla striata has significant medicinal effects in the therapy of various wounds. In this study, PLA and the pharmacodynamic substances of Bletilla striata were prepared into fibrous scaffolds by emulsion electrospinning technology for the management of diabetic wounds in mice. The results of scanning electron microscopy showed that the core-shell structure fibre was successfully obtained by emulsion electrospinning. The fibre membrane exhibited excellent water absorption capability and water vapor transmission rate, could inhibit the growth of Staphylococcus aureus and Pseudomonas aeruginosa, had good compatibility, and achieved excellent healing effect on diabetic wounds. Especially in the in vivo wound healing experiment, the wound healing rate of composite fibre membrane treatment reached 98.587 ± 2.149% in 16days. This work demonstrated the good therapeutic effect of the developed fibrous membrane to diabetic wound, and this membrane could be potentially applied to chronic wound healing.

Development and Optimisation of Hydrogel Scaffolds for Microvascular Network Formation.

Traumatic injuries are a major cause of morbidity and mortality worldwide; however, there is limited research on microvascular traumatic injuries. To address this gap, this research aims to develop and optimise an in vitro construct for traumatic injury research at the microvascular level. Tissue engineering constructs were created using a range of polymers (collagen, fibrin, and gelatine), solvents (PBS, serum-free endothelial media, and MES/NaCl buffer), and concentrations (1-5% w/v). Constructs created from these hydrogels and HUVECs were evaluated to identify the optimal composition in terms of cell proliferation, adhesion, migration rate, viability, hydrogel consistency and shape retention, and tube formation. Gelatine hydrogels were associated with a lower cell adhesion, whereas fibrin and collagen ones displayed similar or better results than the control, and collagen hydrogels exhibited poor shape retention; fibrin scaffolds, particularly at high concentrations, displayed good hydrogel consistency. Based on the multipronged evaluation, fibrin hydrogels in serum-free media at 3 and 5% w/v were selected for further experimental work and enabled the formation of interconnected capillary-like networks. The networks formed in both hydrogels displayed a similar architecture in terms of the number of segments (10.3 ± 3.21 vs. 9.6 ± 3.51) and diameter (8.6446 ± 3.0792 μm vs. 7.8599 ± 2.3794 μm).

Fabrication of polycaprolactone electrospun fibres with retinyl acetate for antioxidant delivery in a ROS-mimicking environment.

Background: Increased cancer rates denote that one in two people will be diagnosed with cancer in their lifetime. Over 60% of cancer patients receive radiotherapy, either as a stand-alone treatment or in combination with other treatments such as chemotherapy and surgery. Whilst radiotherapy is effective in destroying cancer cells, it also causes subsequent damage to healthy cells and surrounding tissue due to alterations in the tumor microenvironment and an increase in reactive oxygen species (ROS). This can cause extensive damage that impairs tissue function, and the likelihood of tissue regeneration and restoration of function is significantly reduced as new healthy cells cannot survive in the damaged environment. In the treatment of head and neck cancers, radiotherapy can cause salivary gland dysfunction. This significantly impairs the patient's quality of life and there is currently no cure, only palliative treatment options. Tissue engineering approaches are used to mimic the microenvironment of the tissue and can mediate the damaged microenvironment via bioactive compounds, to support the delivery, survival, and proliferation of new, healthy cells into the damaged environment. Methods: In this study, retinyl acetate, a derivative of vitamin A, was successfully incorporated into electrospun polycaprolactone fibres. Results: SEM images and characterization analyses showed that all scaffolds produced had similar characteristics, including fiber morphology and scaffold wettability. The vitamin scaffolds were shown to exert an antioxidant effect through scavenging activity of both DPPH and hydroxyl radicals in vitro. Critically, the antioxidant scaffolds supported the growth of human submandibular gland cells and significantly upregulated the expression of GPx1, an antioxidant enzyme, when cultured under both normal conditions and under a simulated oxidative stress environment. Discussion: These results suggest that incorporation of retinyl acetate into electrospun fibres has may mediate the damaged microenvironment post cancer radiation therapy.

Development of all-cellulose sustainable composites from directionally aligned bamboo fiber scaffold with high strength, toughness, and low thermal conductivity

Based on a unique “concrete-steel bar” structure, directionally aligned bamboo fibers have been introduced into cellulose acetate as a scaffold to improve their mechanical properties. Here, we present a simple approach for preparing all-cellulose composites by using an innovative “crosslinking pretreatment-steam delignification” and cellulose-acetate deacetylation procedure. The chemical crosslinking introduced in this strategy can effectively preserve the completeness of raw bamboo, thus providing an effective framework for cellulose acetate infiltration. Through physical crosslinking, cellulose acetate improved the load distribution of the bamboo fibers, and densification from heat compression resulted in a strong fiber-volume fraction with intensive hydrogen bonding between nearby bamboo fibers. This approach endowed regenerated cellulose-delignified bamboo (RC-DB) composites with enhanced mechanical performance. The composite had a specific strength of 813.86 MPa g−1 cm3, which was superior to those of many other building composites. RC-DB exhibited a tensile strength of 1098.71 MPa and tensile modulus of 36.52 GPa, which were 6.87 and 4.53 times larger than those of natural bamboo, respectively. The toughness achieved was 25.61 MJ m−3. The RC-DB composite displayed a low thermal conductivity of 0.08 W m−1 K−1, resulting in exceptional thermal-insulation performance. Furthermore, this study demonstrated the viability of preparing large RC-DB composites. The high mechanical strength, excellent thermal management, biodegradability, and production scalability make RC-DB composites suitable for basic engineering applications.

A thin film comprising silk peptide and cellulose nanofibrils implanting on the electrospun poly(lactic acid) fibrous scaffolds for biomedical reconstruction

Conjunctival reconstruction using biocompatible polymers constitutes an effective treatment for conjunctival scarring and associated visual impairment. In this work, a thin film comprising silk peptide (SP), cellulose nanofibrils (CNF) and Ag nanoparticles (AgNPs) that implanted on the poly(lactic acid) (PLA) electrospun fibrous membranes (EFMs) was designed for biomedical reconstruction. SP and CNF as thin films can improve the surface hydrophilicity of the as-prepared scaffolds, which synergistically enhanced the biocompatibility. In in vivo experiments, the developed PLA EFMs modified with 3 wt% SP/CNF/AgNPs could be easily manipulated and transplanted onto conjunctival defects in rabbits, consequently accelerating the structural and functional restoration of the ocular surface in 12 days. Additionally, incorporation of 0.30 mg/g AgNPs efficiently reduced the topical application of antibiotics without causing infections. Thus, these resultant scaffolds could not only serve as useful alternatives for conjunctival engineering, but also prevent infections effectively with a very low content of AgNPs.

Electrospun Membrane Fabrication in Assisting Tissues Healing

The arrangement of fibers into three-dimensional (3D) complex structure is constructing a sheet of membrane, depending on the fabrication technique. The fiber mats and scaffolds have been used in various applications including tissue engineering which involve the integration of cells and tissues within the pores between the fibers. There are several techniques that have been opted to produce specifically nanofibers as its efficacy in tissue healing is prominent compared to microfibers. Among the fabrication techniques (drawing, template synthesis, temperature-induced phase separation, molecular self-assembly, and electrospinning), electrospinning method has drawn attention due to their easy handling, inexpensive, and ability for membrane scale-up with the production of fibers ranging from few nanometers to several microns. Researchers have employed a variety of electrospinning methods, including blended/co-electrospinning, emulsion, coaxial, side-by-side, and triaxial electrospinning. In electrospinning smooth formation of nanofibers for tissue healing with less appearance of spray and beads, several parameters such as humidity, temperature, voltage, flow rate, viscosity, concentration, molecular weight, surface tension, conductivity, and solvent volatile need to be tailored. The morphology of nanofibers formation should support the size and structure of the surrounded cells and tissues. Besides, the types of degradable polymeric materials also play a role in the formation of stable nanofibers. This review paper aimed to provide information on the techniques to produce nanofibers, intended to the basic exploration of electrospinning.