Fibroin Protein Research Articles

Influence of Micronutrients on the Food Consumption Rate and Silk Production of Bombyx mori (Lepidoptera: Bombycidae) Reared on Mulberry Plants Grown in a Mountainous Agro-Ecological Condition.

The study involves analyzing the performance of bivoltine Bombyx mori larvae reared on different host plants varieties. The consumption rate (CR) of different strains of B. mori was high when fed with Jorhat and TR10 mulberry plant varieties. Jorhat and TR10 mulberry plant varieties were found to contain significant amount of calcium, potassium, magnesium and phosphorus. Local (Hmute) mulberry plant variety had high amount of protein, carbohydrate and reducing sugar. Majority of the B. mori strains reared on Jorhat and TR10 mulberry plant varieties had high level of fibroin protein which resulted in increased silk productivity than those larvae reared with other mulberry varieties. The filament length was higher when reared on Jorhat and TR10 mulberry plant varieties. CSR4 × CSR2, FC1 × FC2, and FC2 × FC1 strains reared on Jorhat and TR10 mulberry plant varieties performed well in terms of economic parameters. Proteins and other nutrients in combination with high levels of micronutrients are very much essential for better silk quality. The present study attempted to identify the most suitable host plants for silkworm rearing under mountainous agro-ecological conditions which can lead to sustainable production of silk in relation to physiological and economic parameters.

The Road to Practical E-Textiles Is Smooth as Silk

The work of Zhang et al. describes a method for 3D-printing a triboelectric generator composed of silk fibroin (SF) and a conductive core of carbon nanotubes (CNT). The resulting SF@CNT fibers offer a roadmap toward energy harvesting fabrics within E-textiles.

Water-insoluble amorphous silk fibroin scaffolds from aqueous solutions.

Regenerated silk fibroin (RSF) is emerging as promising biomaterial for regeneration, drug delivery and optical devices, with continued demand for mild, all-aqueous processes to control microstructure and the performance. Here, temperature control of assembly kinetics was introduced to prepare the water-insoluble scaffolds from neutral aqueous solutions of RSF protein. Higher temperatures were used to accelerate the assembly rate of the silk fibroin protein chains in aqueous solution and during the lyophilization process, resulting in water-insoluble scaffold formation. The scaffolds were mainly composed of amorphous states of the silk fibroin chains, endowing softer mechanical properties. These scaffolds also showed nanofibrous structures, improved cell proliferation in vitro and enhanced neovascularization and tissue regeneration in vivo than previously reported silk fibroin scaffolds. These results suggest utility of silk scaffolds in soft tissue regeneration.

Bom-miR-2805 upregulates the expression of Bombyx mori fibroin light chain gene in vivo.

MicroRNAs (miRs) are inner regulatory RNAs mainly by regulating expression of genes at the posttranscriptional level. To investigate the regulatory function of Bombyx mori (B. mori) fibroin protein genes, the mRNA 3'-untranslated region (3'-UTR) of fibroin light chain gene (BmFib-L) was used as the target and one miRNA, miR-2805 was predicted by using the Software. miR-2805 expression plasmid pcDNA3.0[ie1-egfp-pre-miR-2805-SV40] and BmFib-L 3'-UTR plasmid pGL3.0[A3-luc-Fib-L-3'-UTR-SV40] were constructed, respectively. The mentioned plasmids were cotransfected in BmN cells, and the regulatory function of miR-2805 on BmFib-L was detected by assay of dual luciferase activities, as well as synthesized mimic and inhibitor of miR-2805. The results revealed that miR-2805 significantly downregulated the expression of BmFib-L in BmN cells. To validate the function of miR-2805 in vivo, cultured silk glands or larvae were injected with solution containing pcDNA3.0[ie1-egfp-SV40], pcDNA3.0[ie1-egfp-pre-miR-2805-SV40], mimic, inhibitor respectively. BmFib-L expression was analyzed by quantitative reverse transcription polymerase chain reaction using total RNAs extracted from silk glands. The results showed that miR-2805 significantly upregulated the expression of BmFib-L in both cultured tissues and individuals. To find out how miR-2805 differentially regulates BmFib-L expression in cells and tissues or individuals, we analyzed the expression level of transcription factors (TFs) involved in expression of silk protein genes. The results showed that miR-2805 upregulated the expression of TFs BmAwh and Bmdimm. These results suggest that miR-2805 may up-regulate the expression of BmFib-L interaction with BmAwh and/or Bmdimm in vivo. These findings are beneficial to clarify the molecular mechanism of miRNAs in regulating B. mori silk protein biosynthesis.

Examination of Dyeing Properties on Silk of Some Flavonoids by Spectroscopic Techniques

ABSTRACT In this study, the silk fabrics mordanted at the rates of 1%, 2%, 3%, 4%, 6%, 9%, 12%, 14%, 18%, 21%, 24%, 27%, 30%, 33% and 36% of alum (KAl(SO4)2.12H2O) were separately dyed with chrysin, quercetin dihydrate, 7,8-dihydroxyflavone and naringenin flavonoids. The CIEL*a*b* color values of the performed dyeings were measured and compared with each other. According to the results of the color measurement, the dyeings obtained using the mordant of 6% alum showed the best color values. The bonds relating to the amino acids present in Bombyx mori silk were characterized by FTIR. Also, the binding to the fibroin protein via Al-O and Al-N bonds of Al (coming from alum mordant) was determined. The amino acids including of pure silk were specified by 13C CP/MAS NMR. The coordination numbers of Al (III) ions in the complexes formed among the silk fibroin-mordant-dye were determined by 27Al MAS NMR.

Highly elastomeric photocurable silk hydrogels

A photocurable silk fibroin hydrogel is prepared, for the first time, using natural silk protein fibroin and biophotosensitizer riboflavin. Riboflavin is excited by ultraviolet light to generate a triplet state which is transferred to produce active oxygen radicals with singlet oxygen as the main component. Active oxygen radicals can induce chemical cross-linking of amino-, phenol- and other groups in the silk fibroin macromolecules to form a photocurable hydrogel. The different biophysical characterizations of the gelation of this modified fibroin protein solution were studied by using Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, microplate reader and texture analyzer. The aggregate structures, surface morphologies, mechanical properties, light transmission and degradation properties of the gel were studied. The investigations showed that the silk fibroin/riboflavin hydrogels predominantly have random coils or alpha helix structures. These gels show resilience up to 90% after 80% compression and a light transmission of up to 97%. The cell culture experiment exhibits that the hydrogel has a satisfactory cytocompatibility.

Silk fibroin film-coated MgZnCa alloy with enhanced in vitro and in vivo performance prepared using surface activation

Magnesium and its alloys have generated considerable interest as one of the most promising biodegradable metals for biomedical bone implants. However, the enormous challenges are to improve their rapid corrosion excessively as well as to endow them with biocompatibility and biosafety. Herein, we introduce a natural silk fibroin protein coating to control the corrosion resistance and enhance the biocompatibility of MgZnCa alloy. To obtain a robust and reliable coated structure, different surface-activation processes are employed to increase the available functional groups on MgZnCa surfaces before coating. Compared to oxygen plasma activation, our unique vacuum ultraviolet-ozone (VUV/O3) activation method is effective in realizing uniform silk fibroin films as a protective barrier on MgZnCa alloy surfaces, and the nanoscratch test verified the superior adhesion strength of the silk fibroin-coated magnesium alloy structure. Long-term immersion results combined with electrochemical tests showed the preferable in vitro anticorrosion behavior and a low degradation rate of coated Mg alloy (1/8 times that of uncoated Mg alloy). Cell adhesion and cytotoxicity tests demonstrated that silk fibroin-coated MgZnCa presented improved biocompatibility with bone marrow mesenchymal stem cells. An animal study involving silk fibroin-coated MgZnCa implanted on one side of a rabbit spine for 180 days showed remarkably improved in vivo corrosion resistance, with 1/18 times the degradation rate of uncoated MgZnCa. These results not only comprehensively confirmed the validity of the VUV/O3-activation method as a coating strategy but also implied the tremendous potential of the modified Mg alloy for application as a degradable biomedical implant material. Statement of SignificanceMgZnCa alloy is a promising material in clinical implantation. Silk fibroin (SF) is a natural organic material with biocompatibility and biodegradability. To date, the combination of SF and MgZnCa alloy has exhibited considerable prospects for orthopedic applications. The realization of a direct coating is an enormous challenge because strong chemical bonds cannot be easily formed between organic and inorganic materials. To solve this bottleneck, we proposed a unique vacuum ultraviolet-ozone (VUV/O3) surface-activation method for the first time to modify the Mg alloy surface before SF coating, which significantly enhanced both in vitro and in vivo performance, such as superior biocompatibility and remarkably improved corrosion resistance of magnesium alloys (∼1/18 the in vivo degradation rate of uncoated MgZnCa).

Regenerated Silk and Carbon Nanotubes Dough as Masterbatch for High Content Filled Nanocomposites

Regenerated silk (RS) is a natural polymer that results from the aggregation of liquid silk fibroin proteins. In this work, we observed that RS dispersed in aqueous solution undergoes a reversible solid/liquid transition by programmed heating/cooling cycles. Fourier transform infrared, atomic force microscopy imaging and Raman measurements of the RS reveal that the transition fromrandomcoil to b-sheet structures is involved in this liquid–solid transition. The reversible solid-liquid transition of silk fibroin was then found to be helpful to prepare polymer-like carbon nanotube (CNT) dispersions. We demonstrate that the gelation of RS makes the CNTs with the consistency of a dough with polymeric behavior. Such RS can disperse carbon nanotubes at high concentrations of tens of weight percent. Finally, such carbon nanotube dough has been used for the realization of rubber composites. With this method, we pave the way for handling nanopowders (e.g. CNTs or graphene related materials) with safety and reducing the filler volatility that is critical in polymer-processing.

Sustained release silk fibroin discs: Antibody and protein delivery for HIV prevention

With almost 2 million new HIV infections worldwide each year, the prevention of HIV infection is critical for stopping the pandemic. The only approved form of pre-exposure prophylaxis is a costly daily pill, and it is recognized that several options will be needed to provide protection to the various affected communities around the world. In particular, many at-risk people would benefit from a prevention method that is simple to use and does not require medical intervention or a strict daily regimen. We show that silk fibroin protein can be formulated into insertable discs that encapsulate either an antibody (IgG) or the potent HIV inhibitor 5P12-RANTES. Several formulations were studied, including silk layering, water vapor annealing and methanol treatment to stabilize the protein cargo and impact the release kinetics over weeks. In the case of IgG, high concentrations were released over a short time using methanol treatment, with more sustained results with the use of water vapor annealing and layering during device fabrication. For 5P12-RANTES, sustained release was obtained for 31 days using water vapor annealing. Further, we show that the released inhibitor 5P12-RANTES was functional both in vitro and in ex vivo colorectal tissue. This work shows that silk fibroin discs can be developed into formidable tools to prevent HIV infection.

Investigating the Role of Sustained Calcium Release in Silk-Gelatin-Based Three-Dimensional Bioprinted Constructs for Enhancing the Osteogenic Differentiation of Human Bone Marrow Derived Mesenchymal Stromal Cells.

Scaffold-based bone tissue engineering strategies fail to meet the clinical need to fabricate patient-specific and defect shape-specific, anatomically relevant load-bearing bone constructs. 3D bioprinting strategies are gaining major interest as a potential alternative, but design of a specific bioink is still a major challenge that can modulate key signaling pathways to induce osteogenic differentiation of progenitor cells, as well as offer appropriate microenvironment to augment mineralization. In the present study, we developed silk fibroin protein and gelatin-based conjugated bioink, which showed localized presence and sustained release of calcium. Presence of 2.6 mM Ca2+ ions within the bioink could further induce enhanced osteogenesis of Bone marrow derived progenitor cells (hMSCs) compared to the bioink without calcium, or same concentration of calcium added to the media, as evidenced by upregulated gene expression of osteogenic markers. This study generated unprecedented mechanistic insights on the role of fibroin-gelatin-CaCl2 bioink in modulating expression of several proteins which are known to play crucial role in bone regeneration as well as key signaling pathways such as β-catenin, BMP signaling pathway, Parathyroid hormone-dependent signaling pathway, Forkhead box O (FOXO) pathway, and Hippo pathways in hMSC-laden bioprinted constructs.

Production and Characterization of Porous Fibroin Scaffolds for Regenerative Medical Application.

Silk is a natural biomaterial with several superior features for applications in regenerative medicine. In the present study an optimized process for manufacturing porous scaffolds out of the silk protein fibroin was developed. The silk protein fibroin was dissolved in Ajisawa's reagent and the resulting fibroin solution was used to produce scaffolds by means of freeze-thawing cycling. Porosity, pressure and stab resistance as well as degradation behavior were assessed in order to characterize the physical properties of the resulting scaffolds. The resulting sponge-like fibroin scaffolds were highly porous while the porosity correlated inversely with the concentration of the starting fibroin solution. Increased initial fibroin concentrations of the scaffolds resulted in increased compressive and cannulation resistance. The majority of the fibroin scaffolds were digested by 1 mg/ml protease XIV in 3 weeks, indicating their biodegradability. The production of scaffolds made of varying fibroin concentrations by means of freeze-thawing, following dissolution using Ajisawa's reagent, provides a simple and straightforward strategy for adjusting the physical and chemical properties of fibroin scaffolds for various medical applications.

Analysis of the Fibroin Solution State in Calcium Chloride/Water/Ethanol for Improved Understanding of the Regeneration Process

Shaping of fibroin protein from Bombyx mori from calcium chloride/water/ethanol solution is of high interest for the manufacturing of biocompatible structures. Potentiometric titration experiments of the dissolved state permit new insight into the solution state of fibroin as a basis for improved regeneration. Titration experiments and infrared spectroscopy of the solution state support the model of an ion-rich hydration layer and interaction of the solvent with charged and polar groups of the fibroin, rather than through formation of defined calcium complexes. The potentiometric titration curves indicate the formation of calcium complexes at pH values above 9, most probably through involvement of basic amino acids and phenolic groups of tyrosine. After regeneration by the addition of methanol, the regenerated protein was characterised by FTIR, nitrogen and calcium analysis. The analysis of supernatants for their residual protein content indicated minor losses of protein, most probably low molecular weight proteins. The results contribute to an improved understanding of the solution state as a basis for larger scale regeneration, e.g. for the coating of textile fibres with regenerated fibroin.

Processing and Characterization of Antibacterial Hydrogel Sheet Dressings Composed of Poly(vinyl alcohol) and Silk Fibroin for Wound Healing Application

Hydrogels are soft materials that contain high water content within their 3-dimensional structure. Such extremely hydrated environment allows hydrogels to recapitulate the structure of many native tissues inside the body. In biomedical application, hydrogels have been extensively used as biocompatible materials, drug delivery systems, and tissue-engineered scaffolds that can be designed to possess either permanent or slow-degradation properties. In this research, we applied gamma irradiation to develop transparent and conformal hydrogel sheets with sufficient mechanical strength from poly(vinyl alcohol) (PVA) and further modified the based PVA matrix with naturally-derived silk fibroin (SF) protein and silver nitrate (AgNO3) for wound healing purpose. The physical and mechanical properties of based PVA hydrogels formed at varied irradiation doses from 10 - 80 kGy were first characterized. The dose of 60 kGy was found to be optimal to process flexible and elastic PVA sheets with equilibrium degree of swelling of 1000 %, gel fraction of 90 %, and tensile strength of 19 kPa. To further enhance water absorption capacity, 10 - 40 % (w/w) silk fibroin was added to the based PVA matrix. Based on water absorption and gel fraction data, hydrogel sheets with 8PVA:2SF formulation was selected for antibacterial test. Disc diffusion assay showed that the incorporation of 0.4 mM AgNO3 in 8PVA:2SF hydrogel sheets could inhibit the growth of Staphyllococcus aureus and Pseudomonas aeruginosa. These results demonstrated that a prototypic, antibacterial hydrogel sheet dressing composed of both synthetic and natural polymers could be developed within a single-step by gamma irradiation technique.

Exploring Gelation and Physicochemical Behavior of in Situ Bioresponsive Silk Hydrogels for Disc Degeneration Therapy.

Hydrogels have received considerable attention in the field of tissue engineering because of their unique structural and compositional resemblance to the highly hydrated human tissues. In addition, controlled fabrication processes benefit them with desirable physicochemical features for injectability in minimally invasive manner and cell survival within hydrogels. Formulation of biologically active hydrogels with desirable characteristics is one of the prerequisites for successful applications like nucleus pulposus (NP) tissue engineering to address disc degeneration. To achieve such a benchmark, in this study, two naturally derived silk fibroin proteins (Bombyx mori, BM SF; and Antheraea assamensis, AA SF) were blended together to allow self-assembly and transformation to hydrogels in absence of any cross-linker or external stimuli. A comprehensive study on sol-gel transition of fabricated hydrogels in physiological fluid microenvironment (pH, temperature, and ionic strength) was conducted using optical and fluorescence analysis. Tunable gelation time (∼8-40 min) was achieved depending on combinations. The developed hydrogels were validated by extensive physicochemical characterizations which include confirmation of secondary structure, surface morphology, swelling and degradation. Mechanical behavior of the hydrogels was further analyzed in various in vitro-physiological-like conditions with varying pH, ionic strength, diameter, storage time, and strain values to determine their suitability in native physiological environments. Rheological study, cytocompatibility using primary porcine NP cells and ex vivo biomechanics of hydrogels were explored to validate their in situ applicability in minimally invasive manner toward potential disc regeneration therapy.

Silk fibroin protein modified acellular dermal matrix for tissue repairing and regeneration

Worldwide the demand of skin-graft has been increasing day by day, for these different biomaterials and techniques have been used. In the present study, we have fabricated Silk Fibroin (SF) modified hybrid acellular goat-dermal matrix (SF-AGDM) by modifying the AGDM in different concentration SF― 5, 10, 15%, for enhancing the wound healing process.The grafts (AGDM and SF-AGDM) were evaluated for skin tissue regeneration by subjecting it through physical, chemical and biological characterization. SLS analysis showed the molecular weight of SF was 10,000 Da. Here, we found that SF-AGDM modified with low concentration of SF showed good porosity 78.56 ± 14.30% and pore size 74.69 ± 28.66 μm as similar to the AGDM. FTIR analysis showed the shifting of NH stretching (3400–3600 cm−1), amide I band at 3427 cm−1 and 1641 cm−1 and disappearance of the peaks of CH asymmetrical stretching (3000–2800 cm−1), amide II and amide III band, which indicate formation of amide linkage or other interaction between the SF protein and AGDM. In vitro cell culture studies by seeding 3 T3 mouse fibroblast cells on the scaffold revealed excellent cell viability, proliferation rate and adhesion in the scaffold. Pre-clinical study done in albino mice model showed within 14 days, all the wounds were completely cured, full thickness skin was regenerated without any significant inflammatory response. SF-ADGM results better healing as compared to the unmodified AGDM, which indicates the synergetic effect of SF coupled with acellular ECM based matrix.Thus, SF-AGDM is biocompatible, cost-effective material that can be potentially applied for tissue engineering application.

Humidity sensing using THz metamaterial with silk protein fibroin.

In this study, we developed hybrid humidity sensing methods by incorporating silk fibroin protein onto metamaterials, operating in the terahertz (THz) frequencies; the resonant frequency shifted but saturated at a specific thickness due to the limited sensing volume of the metamaterial. From the saturated value, we extracted the dielectric constant for the silk films. We also observed additional resonance shifts when we applied humid air to silk-coated metamaterials, due to the increased water molecule numbers on the film. Frequency shifts depend linearly on relative humidity. Also, in situ THz spectroscopy measurements reveal that the time response is instantaneous within our detection limit, especially upon exposure to humid air, whereas the small slowly decaying component appeared when we applied dry air. The time taken by the slow component in the drying process was 10-50 s, depending on film thickness. This could optimize humidity sensors as a fast and efficient detection tool to measure air humidity.

Solvent-Free Strategy To Encapsulate Degradable, Implantable Metals in Silk Fibroin.

Implantable electronics hold enormous clinical potential for diagnosis and treatment of neurodegenerative and cardiac diseases and abnormalities. Transient devices are attractive alternatives to conventional silicon electrodes, as they can provide short-term electrical stimulation/recording followed by complete device degradation, mitigating the need for removal surgeries. Packaging transient metals is inherently challenging as they degrade upon contact with aqueous conditions. Development of new transient metal packaging strategies is a critical step toward transient device development. In this fundamental work, a solvent-free compression molding approach to encapsulate magnesium, a resorbable metal, in silk fibroin protein is reported. Silk fibroin was selected because of its processing versatility, desirable mechanical properties, compatibility with biological environments, and controllable degradation behavior in aqueous environments. The silk/magnesium composites were fabricated via compression molding, followed by water annealing to modify the secondary structure of the silk protein matrix to tune physical properties. Transient composite properties as a function of water annealing time are presented, which elucidate synergies between silk physical properties and degradation kinetics of the encapsulated magnesium, information useful in the design of multifunctional, transient metal-based constructs.

Tuning the properties of silk fibroin biomaterial via chemical cross-linking

Protein-based biomaterials with innovative and controlled performance are being sought due to their unique characteristics for use in biomedical fields such as neural implants, drug delivery systems, cell-based therapies and soft tissue engineering. Here, we present a versatile approach for the synthesis of photo-crosslinkable fibroin silk biomaterial with highly tunable mechanical, chemical and biodegradation properties. Unlike the crystalline rich silk fibroin reported previously, the covalently cross-linked fibroin protein photoresist (FPP) via controlled light-induced radical grafting, allows generating a new amorphous biomaterial with tunable properties. It appears that the use of photo-reactive acrylate groups to cross-link FPP induces plasticity that can be tuned by changing the photoinitiator concentration of the film. Tensile strength measurements revealed that elasticity was higher for FPP UV-cross-linked materials with higher concentration of photoinitiator. FTIR and relative humidity measurements showed that hydrophilicity was higher for UV-cross-linked FPP. These materials display stiffness between 0.01–1.5 GPa and tensile strains up to 60%, covering a significant portion of the properties of native soft biomaterials. Besides, in vitro proteolytic degradation of the photocrosslinked FPP films demonstrate a tunable degradation rate over a period ranging from hours to weeks. Those biomaterials have been successfully micropatterned by photolithography techniques across several orders of magnitude (μm to cm) and a systematic study of direct patterning of the fibroin protein to form high fidelity and high-resolution structures has been reported. It was also shown that the fabricated protein features are well suited to cell adhesion. The development of protein-based material with controlled and tunable elasticity that can be easily photo-patterned into centimeter, micrometer and nanometer components will allow a wide range of applications in biomedical fields requesting a natural functional tissue.

A Novel 3D in Vitro Tumor Model Based on Silk Fibroin/Chitosan Scaffolds To Mimic the Tumor Microenvironment.

Drug development involves various evaluation processes to ascertain drug effects and rigorous analysis of biological indicators during in vitro preclinical studies. Two-dimensional (2D) cell cultures are commonly used in numerous in vitro studies, which are poor facsimiles of the in vivo conditions. Recently, three-dimensional (3D) tumor models mimicking the tumor microenvironment and reducing the use of experimental animals have been developed generating great interest to appraise tumor response to treatment strategies in cancer therapy. In this study, silk fibroin (SF) protein and chitosan (CS), two natural biomaterials, were chosen to construct the scaffolds of 3D cell models. Human non-small cell lung cancer A549 cells in the SF/CS scaffolds were found to have a great tendency to gather and form tumor spheres. A549 cell spheres in the 3D scaffolds showed biological and morphological characteristics much closer to the in vivo tumors. Besides, the cells in 3D models displayed better invasion ability and drug resistance than 2D models. Additionally, differences in drug-resistant and immune-related protein levels were found, which indicated that 3D models might resemble the real-life situation. These findings suggested that these 3D tumor models composed of SF/CS are promising to provide a valuable biomaterial platform in the evaluation of anticancer drugs.

Comparative Investigation of Thermal and Structural Behavior in Renewably Sourced Composite Films of Even-Even Nylons (610 and 1010) with Silk Fibroin.

As the average life expectancy continues to increase, so does the need for resorbable materials designed to treat, augment, or replace components and functions of the body. Naturally occurring biopolymers such as silks are already attractive candidates due to natural abundance and high biocompatibility accompanied by physical properties which are easily modulated through blending with another polymer. In this paper, the authors report on the fabrication of biocomposite materials made from binary blends of Bombyx mori silk fibroin (SF) protein and renewably sourced low molecular weight nylon 610 and high molecular weight nylon 1010. Films were characterized using scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Results of this study demonstrated that enhanced structural and thermal properties were achievable in composite films SF-N610/N1010 due to their chemical similarity and the possible formation of hydrogen bonds between nylon and silk molecular chains. This study provides useful insight into the sustainable design of functional composite materials for biomedical and green technologies.