Fibroin Research Articles

PI3K-Akt-SGF1-Dimm pathway mediates the nutritional regulation of silk protein synthesis in Bombyx mori

The efficient synthesis of silk protein is heavily reliant on the ingestion of massive nutrients during the peak growth phase in the silkworm. However, the molecular mechanism of nutritional regulation of silk protein synthesis remains unknown. In this study, we investigated the impact of nutrient deficiency on the synthesis of silk protein. Nutritional deficiency led to a reduction in silk yield, accompanied by decreased levels of silk proteins and fibroin heavy chain (FibH)-activating transcription factors SGF1 and Dimm. Furthermore, insulin enhanced the protein levels of SGF1 and Dimm, which can be attenuated by specific inhibitors of PI3K. Co-immunoprecipitation analysis showed that the nutrient pathway factor protein kinase B (Akt) could interact with SGF1 protein. Knockdown of Akt reduced the phosphorylation level of SGF1 and impedes its nuclear translocation. Further studies revealed that SGF1 was directly bound to Fkh site in the 22–43 region upstream of ATG of Dimm gene to activate its transcription. In conclusion, during the peak growth phase, nutrition promotes the massive synthesis of silk protein through the PI3K-Akt-SGF1-Dimm pathway. This study offers valuable insights into the efficient synthesis of silk proteins and establishes a theoretical foundation for improving silk yield.

Nanofibrous textured silk aerogel with 3D channel arrays and adjustable mechanical properties for bone tissue regeneration

Bone tissue engineering scaffolds are an important means of repairing bone defects, but current solutions do not adequately simulate complex extracellular microenvironment fibrous structures and adjustable mechanical properties. We use template-assisted fiber freeze-shaping technology to construct silk fibroin nanofiber aerogels (SNFAs) with nanofibrous textures and adjustable mechanical properties. The parallel arranged channels, the pores, electrospun nanofibers, and silk protein conformation together constitute the hierarchical structure of SNFAs. Especially, the introduced electrospun nanofibers formed a biomimetic nanofibrous texture similar to the extracellular matrix, providing favorable conditions for cell migration and tissue regeneration. In addition, Young's modulus of SNFAs can be adjusted freely between 7 and 88 kPa. The rationally designed 3D architecture makes SNFAs perfectly mimic the fiber structure of the extracellular matrix and can adjust its mechanical properties to match the bone tissue perfectly. Finally, fiber-containing SNFAs observably promoted cell adhesion, proliferation, and differentiation, accelerating the bone repair process. The bone density in the defect area reached 0.53 g/cm3 and the bone volume/total volume (BV/TV) ratio reached 57 % at 12 weeks, respectively. It can be expected that this kind of tissue engineering scaffold with highly simulating extracellular matrix microenvironment and adjustable mechanical properties will possess broad prospects in the field of bone repair.

Silk fibroin-based wearable SERS biosensor for simultaneous sweat monitoring of creatinine and uric acid

Sweat biomarkers have the potential to offer valuable clinical insights into an individual's health and disease condition. Current sensors predominantly utilize enzymes and antibodies as biometric components to measure biomarkers present in sweat quantitatively. However, enzymes and antibodies are susceptible to interference by environmental factors, which may affect the performance of the sensor. Herein, we present a wearable microfluidic surface-enhanced Raman scattering (SERS) biosensor that enables the non-invasive and label-free detection of biomarkers in sweat. Concretely, we developed a bimetallic self-assembled anti-opal array structure with uniform hot spots, enhanced the Raman scattering effect, and integrated it into a silk fibroin-based sensing patch. Utilizing a silk fibroin substrate in the wearable SERS sensor imparts desirable properties such as softness, breathability, and biocompatibility, which enables the sensor to establish close contact with the skin without causing chemical or physical irritation. In addition, introducing microfluidic channels enables the controlled and high temporal resolution management of sweat, facilitating more efficient sweat collection. The proposed label-free SERS sensor can offer chemical ‘fingerprint’ information, enabling the identification of sweat analytes. As an illustration of the feasibility, we have effectively monitored the creatinine and uric acid levels in sweat. This study presents a versatile and highly sensitive approach for the simultaneous detection of biomarkers in human sweat, showcasing significant potential for application in point-of-care monitoring.

Hybrid construction of tissue-engineered nerve graft using skin derived precursors induced neurons and Schwann cells to enhance peripheral neuroregeneration

Peripheral nerve injury is a major challenge in clinical treatment due to the limited intrinsic capacity for nerve regeneration. Tissue engineering approaches offer promising solutions by providing biomimetic scaffolds and cell sources to promote nerve regeneration. In the present work, we investigated the potential role of skin-derived progenitors (SKPs), which are induced into neurons and Schwann cells (SCs), and their extracellular matrix in tissue-engineered nerve grafts (TENGs) to enhance peripheral neuroregeneration. SKPs were induced to differentiate into neurons and SCs in vitro and incorporated into nerve grafts composed of a biocompatible scaffold including chitosan neural conduit and silk fibroin filaments. In vivo experiments using a rat model of peripheral nerve injury showed that TENGs significantly enhanced nerve regeneration compared to the scaffold control group, catching up with the autograft group. Histological analysis showed improved axonal regrowth, myelination and functional recovery in animals treated with these TENGs. In addition, immunohistochemical staining confirmed the presence of induced neurons and SCs within the regenerated nerve tissue. Our results suggest that SKP-induced neurons and SCs in tissue-engineered nerve grafts have great potential for promoting peripheral nerve regeneration and represent a promising approach for clinical translation in the treatment of peripheral nerve injury. Further optimization and characterization of these engineered constructs is warranted to improve their clinical applicability and efficacy.

An Electrochemical Biosensor for the Detection of Pulmonary Embolism and Myocardial Infarction.

Due to the clinical similarities between pulmonary embolism (PE) and myocardial infarction (MI), physicians often encounter challenges in promptly distinguishing between them, potentially missing the critical window for the correct emergency response. This paper presents a biosensor, termed the PEMI biosensor, which is designed for the identification and quantitative detection of pulmonary embolism or myocardial infarction. The surface of the working electrode of the PEMI biosensor was modified with graphene oxide and silk fibroin to immobilize the mixture of antibodies. Linear sweep voltammetry was employed to measure the current-to-potential mapping of analytes, with the calculated curvature serving as a judgment index. Experimental results showed that the curvature exhibited a linear correlation with the concentration of antigen FVIII, and a linear inverse correlation with the concentration of antigen cTnI. Given that FVIII and cTnI coexist in humans, the upper and lower limits were determined from the curvatures of a set of normal concentrations of FVIII and cTnI. An analyte with a curvature exceeding the upper limit can be identified as pulmonary embolism, while a curvature falling below the lower limit indicates myocardial infarction. Additionally, the further the curvature deviates from the upper or lower limits, the more severe the condition. The PEMI biosensor can serve as an effective detection platform for physicians.

Development of Ultraviolet-Shielding Bamboo/Silk Fibroin Hybrid Films with Good Mechanical Properties: A Proof Study on Human Keratinocyte Cells.

In this study, we report the preparation and characterization of water-stable films with UV-shielding and good mechanical properties, exploiting the synergistic effect of regenerated silk fibroin and bamboo-derived cellulose. Silk fibroin (SF)/bamboo (B) hybrid films are achieved by solubilizing both silk and bamboo fibers in formic acid with added CaCl2. Infrared spectroscopy indicates that SF, when combined with bamboo, undergoes a conformational transition, providing evidence of an increase in SF crystallinity. Exploiting the intrinsic absorption of SF in the ultraviolet region, UV-Vis spectroscopy was used to assess the glass transition temperature (Tg) of SF/B films, showing a decrease in Tg by increasing the SF content. The addition of 10 wt% SF to the B matrix improved the elastic modulus by about 10% while conserving the strain at break with respect to the neat B films, increasing the UV shielding properties, while water absorption suggested the material's hydrophilic and swelling capacity even after one month. The hybrid films showed, under solar irradiation, a photoprotective behavior on keratinocyte human cells by increasing cellular viability. These findings may find potential applications in functional fabrics.

The Application of Regenerated Silk Fibroin in Tissue Repair.

Silk fibroin (SF) extracted from silk is non-toxic and has excellent biocompatibility and biodegradability, making it an excellent biomedical material. SF-based soft materials, including porous scaffolds and hydrogels, play an important role in accurately delivering drugs to wounds, creating microenvironments for the adhesion and proliferation of support cells, and in tissue remodeling, repair, and wound healing. This article focuses on the study of SF protein-based soft materials, summarizing their preparation methods and basic applications, as well as their regenerative effects, such as drug delivery carriers in various aspects of tissue engineering such as bone, blood vessels, nerves, and skin in recent years, as well as their promoting effects on wound healing and repair processes. The authors expect SF soft materials to play an important role in the field of tissue repair.

Silk Fibroin Fibers with In Situ Growth of ZIF-67 Nanoparticles for Membranes with Highly Efficient Nanofluidic Ion Transport

Silk Fibroin Fibers with In Situ Growth of ZIF-67 Nanoparticles for Membranes with Highly Efficient Nanofluidic Ion Transport

Spatiotemporal delivery of microenvironment responsive hydrogel incorporated with stem cells-loaded porous microspheres for abdominal wall repair

Healing the wounds of abdominal wall defects characterised by severe complications represents a significant clinical challenge. Mesenchymal stem cells (MSC)-based therapies have emerged as a promising strategy for tissue regeneration. However, the low engraftment and survival rates limit their application owing to the complicated wound microenvironment and large wound areas in abdominal wall defects. Inspired by focal biointerfaces, the present research engineered a spatiotemporal delivery microenvironment-responsive therapeutic platform, termed MSC-GSM@HG, for abdominal wall repair. The constructed platform proved capable of dissolving HA-PBA/Gel-DA (HG) hydrogels in response to in vivo inflammatory responses and subsequently releasing MSC-laden gelatine and silk fibroin microspheres (GSMs). Meanwhile, the HG hydrogels can not only protect the MSCs from excessive reactive oxygen species but also exhibit haemostatic and anti-inflammatory properties. Strikingly, this microsphere-releasing hydrogel platform actively enhanced the repair of abdominal wall defects in vivo, by reducing inflammatory response, facilitating angiogenesis and promoting collagen deposition. Therefore, the microenvironment-responsive platform represents a promising strategy for MSC-based therapies for abdominal wall defects through spatiotemporal delivery mechanisms.

Injectable Regenerated Silk Fibroin Micro/Nanosphere with Enhanced Permeability and Stability for Osteoarthritis Therapy.

In the therapy of early-stage osteoarthritis, to accomplish full infiltration of subchondral bone and cartilage, and to target osteoclast and chondrocyte simultaneously remain challenges in biomaterials design. Herein, a novel hierarchical drug delivery system is introduced, with micrometer-scale outer layer spheres composed of regenerated silk fibroin, characterized by connected porous structure through the n-butanol and regenerated silk fibroin combined emulsion route and freezing method. The design effectively resists clearance from the joint cavity, ensuring stable delivery and prolonged residence time within the joint space. Additionally, the system incorporates phenylboronic acid-enriched silk fibroin nanoparticles, stabilized through chemical cross-linking, which encapsulate isoliquiritin derived from Glycyrrhiza uralensis. These nanoparticles facilitate complete penetration of the cartilage extracellular matrix, exhibit pH-responsive behavior, neutralize reactive oxygen species, and enable controlled drug release, thereby enhancing therapeutic efficacy. The in vitro and in vivo experiments both demonstrate that the composite micro/nanospheres not only inhibit osteoclastogenesis with bone loss in subchondral bone and osteophyte formation, but also mitigate chondrocytes apoptosis, reduce oxidative stress associated with cartilage degeneration, and ameliorate neuropathic hyperalgesia, with the underlying mechanisms being elucidated. The study indicates that such an injectable strategy combining organic biomaterials with Chinese medicine holds substantial promise for the treatment of early osteoarthritis.

Enhanced specific surface area and mechanical property of silk nanofibers aerogel for potential hemostasis applications

Biopolymer aerogel is a new type of material with potential applications in the biomedical field. Silk fibroin is of particular interest as a raw material with good biocompatibility and degradable. However, the low mechanical strength and small specific surface area of silk fibroin aerogels limit its further development. Herein, a fast water absorption, highly specific surface area and mechanically strong of aerogels were prepared using low crystal silk fibroin nanofibers (SNF), sol-gel process, solvent exchange and supercritical carbon dioxide (CO2) drying method. The resulting Aero-Sc displayed highly specific surface area (251 m2/g), porosity (97.6 %) and water absorption capacity (1200 %). Furthermore, with rapid water absorption and stronger erythrocyte adhesion, the Aero-Sc showed highly effective hemostasis in vitro. In vivo, animal experiments on rat liver hemorrhage model confirmed that SNF aerogels have a less blood loss (312 ± 29 mg) and faster hemostatic time (92 ± 13 s) than commercially gelatin sponge (p < 0.05). The unique properties of silk fibroin nanofibers aerogel developed in this study has great potential to be a safe and effective hemostatic medical device.

Synthesis and characterization of injectable thermosensitive hydrogel based on Pluronic-grafted silk fibroin copolymer containing hydroxyapatite nanoparticles as potential for bone tissue engineering

Injectable hydrogels are promising for bone tissue engineering due to their minimally invasive application and adaptability to irregular defects. This study presents the development of pluronic grafted silk fibroin (PF-127-g-SF), a temperature-sensitive graft copolymer synthesized from SF and modified PF-127 via a carbodiimide coupling reaction. The PF-127-g-SF copolymer exhibited a higher sol-gel transition temperature (34 °C at 16 % w/v) compared to PF-127 (23 °C), making it suitable for injectable applications. It also showed improved flexibility and strength, with a yielding point increase from <10 % to nearly 30 %. Unlike PF-127 gel, which degrades within 72 h in aqueous media, the PF-127-g-SF copolymer maintained a stable gel structure for over two weeks due to its robust crosslinked hydrogel network. Incorporating hydroxyapatite nanoparticles (n-HA) into the hydrogel reduced pore size and decreased swelling and degradation rates, extending structural stability to four weeks. Increasing n-HA concentration from 0 % to 20 % reduced porosity from 80 % to 66 %. Rheological studies indicated that n-HA enhanced the scaffold's strength and mechanical properties without altering gelation temperature. Cellular studies with MG-63 cells showed that n-HA concentration influenced cell viability and mineralization, highlighting the scaffold's potential in bone tissue engineering.

Preparation of silk fibroin-derived hydrogels and applications in skin regeneration.

To compare different methods of preparing silk fibroin hydrogels, then summarize the applications of silk fibroin hydrogel-based scaffolds in skin regeneration and finally discuss about future prospects to inspire people interested in this field. A narrative review of the relevant papers was conducted. Notably, for applications in skin regeneration, this review provides a categorized summary and discussion of studies from the past decade. Silk fibroin is a naturally occurring, biocompatible biomaterial that is easily producible. Thanks to its exceptional processability, silk fibroin has found diverse applications in skin regeneration. These applications encompass sponges, fiber fabrics, thin films, and hydrogels. Hydrogels, in particular, are noteworthy due to their water-containing network structure, closely resembling natural tissues. They provide a biomimetic three-dimensional growth environment for cells and have the capacity to incorporate growth factors. Consequently, there are abundant studies of silk fibroin hydrogel-based scaffolds in skin regeneration. Besides, some commercialized medical devices are also made of silk fibroin. Silk fibroin hydrogel could be prepared with multiple methods and it is widely used in constructing scaffolds for efficient skin regeneration. In the future, silk fibroin hydrogel-based skin scaffolds could be more biomimetic and smart.

Piezoelectric fibers based on silk fibroin with excellent output performance

Abstract The self-powered tissue engineering scaffold with good biocompatibility is of great significance for stimulating nerve cell growth. In this study, silk fibroin (SF)-based fibers with regulatable structure and piezoelectric performance are fabricated by dry-spinning and post-treatment. The concentration of SF and calcium ion in spinning dope and the post-treatment affect the conformation transition and crystallinity of SF. As a result, the SF fibers exhibit high piezoelectric coefficient d 33 (3.24 pm/V) and output voltage (∼ 27 V). Furthermore, these piezoelectric fibers promote the growth of PC-12 cells, demonstrating the promising potential for nerve repair and other energy harvester.

Injectable Nanorobot-Hydrogel Superstructure for Hemostasis and Anticancer Therapy of Spinal Metastasis

HighlightsSite-selective superassembly was used to synthesize a nanorobot with bionic rod-shaped head/hollow tail structure, exhibiting strong photothermal effect, high drug loading capacity, precise and controlled drug release, and excellent motility.Injectable regenerated silk fibroin (RSF) nanofibril hydrogels were developed via simple sonication, offering significant production, structural, and performance advantages.Nanorobot/thrombin (Thr)/RSF nanofibril hydrogels reduced intraoperative bleeding of hepatocellular carcinoma (HCC) spinal metastasis, provided starvation embolization, and prevented post-surgery recurrence.Nanorobot/Thr/RSF nanofibril hydrogels inhibited blood supply to residual tumors and reduced neovascularization, inhibiting post-surgery HCC spinal metastasis recurrence.

Antimicrobial Silk Fibroin Methacrylated Scaffolds for Regenerative Endodontics

IntroductionRecognizing the necessity of novel disinfection strategies for improved bacterial control to ultimately favor tissue regeneration, this study developed and characterized antibiotics-laden silk fibroin methacrylated (SilkMA) scaffolds for regenerative endodontics. MethodsSilkMA-based solutions (10% w/v) containing Clindamycin (CLI) or Tinidazole (TIN) (0 – control; 5, 10, or 15% w/w) or the combination of both drugs (BiMix CLI/TIN 10%) were electrospun and photocrosslinked. Morphology and composition were assessed using scanning electron microscopy and Fourier-transform infrared spectroscopy. Additionally, swelling and degradation profiles were also determined. Cytotoxicity was evaluated in stem cells from apical papilla. Antibacterial efficacy was tested using direct and indirect contact assays against Aggregatibacter actinomycetemcomitans/Aa, Actinomyces naeslundii/An, Enterococcus faecalis/Ef, and Fusobacterium nucleatum/Fn. E. faecalis biofilm inhibition on dentin discs was specifically evaluated for BiMix-laden scaffolds. Data were statistically analyzed with a significance level of 5%. ResultsScanning electron microscopy revealed that all scaffolds had similar characteristics, including fiber morphology and bead absence. Fourier-transform infrared spectroscopy showed the incorporation of CLI and TIN into the fibers and in BiMix scaffolds. Antibiotic-laden scaffolds exhibited lower swelling capacity than the control and were degraded entirely after 45 days. Scaffolds laden with CLI, TIN, or BiMix throughout all time points did not reduce stem cells from apical papilla's viability. CLI-laden scaffolds inhibited the growth of Aa, An, and Ef, while TIN-laden scaffolds inhibited Fn growth. BiMix-laden scaffolds significantly inhibited Aa, An, Ef, and Fn in direct contact, and their aliquots inhibited An and Fn through indirect contact, with additional biofilm inhibition against Ef. ConclusionsBiMix-laden SilkMA scaffolds are cytocompatible and exhibit antimicrobial effects against endodontic pathogens, indicating their therapeutic potential as a drug delivery system for regenerative endodontics.

Electrospun high hydrophilicity antimicrobial poly (lactic acid)/silk fibroin nanofiber membrane for wound dressings

Antimicrobial wound dressings can aid wound healing by preventing bacterial infection. This is particularly true of electrospun ones, which have a porous structure and can be easily loaded with antimicrobial drugs. Here, Poly lactic acid (PLA), Silk Fibroin (SF) and antimicrobial agents of Silver nanoparticles (Ag NPs) and Silver oxide (Ag2O) to prepare the PLA/SF composites antimicrobial nanofiber membrane by electrospinning. The PLA with 30 % SF nanofiber membrane show the water vapor permeability (WVP) and the liquid absorption of 36 g·mm/(m2·d·kPa) and 1721 %. With the increasing of SF contents, the degradation rate and surface hydrophilicity of the nanofiber membrane increase significantly. The nanofiber membrane exhibited excellent antimicrobial activity against Pseudomonas aeruginosa (P. aeruginosa) with the inhibition circle reach at 18.2 mm. The resultant nanofiber membrane showed high cytosolic activity, good cytocompatibility and strong antimicrobial ability, which laid a theoretical foundation for the construction of a new PLA/SF composites antimicrobial fiber membrane.

In-vitro and in-vivo evaluation of angiogenic potential of a novel lithium chloride loaded silk fibroin / alginate 3D porous scaffold with antibacterial activity, for promoting diabetic wound healing

Healing diabetic ulcers with chronic inflammation is a major challenge for researchers and professionals, necessitating new strategies. To rapidly treat diabetic wounds in rat models, we have fabricated a composite scaffold composed of alginate (Alg) and silk fibroin (SF) as a wound dressing that is laden with molecules of lithium chloride (LC). The physicochemical, bioactivity, and biocompatibility properties of Alg-SF-LC scaffolds were investigated in contrast to those of Alg, SF, and Alg-SF ones. Afterward, full-thickness wounds were ulcerated in diabetic rats in order to evaluate the capacity of LC-laden scaffolds to regenerate skin. The characterization findings demonstrated that the composite scaffolds possessed favorable antibacterial properties, cell compatibility, high swelling, controlled degradability, and good uniformity in the interconnected pore microstructure. Additionally, in terms of wound contraction, re-epithelialization, and angiogenesis improvement, LC-laden scaffolds revealed better performance in diabetic wound healing than the other groups. This research indicates that utilizing lithium chloride molecules loaded in biological materials supports the best diabetic ulcer regeneration in vivo, and produces a skin replacement with a cellular structure comparable to native skin.

PREPARATION, CHARACTERIZATION AND ANALYSIS OF NANOSCALE MORPHOLOGY OF POLY(VINYL ALCOHOL) FILMS ASSOCIATED WITH SILK FIBROIN FUNCTIONALIZED WITH COPAÍBA OLEORESIN

Biodegradable films based on poly(vinyl alcohol) (PVA) and bioactive substances have been receiving great attention in the food industry, as they offer an eco-friendly alternative to conventional packaging. In this context, we synthesized PVA (PVAF) films containing silk fibroin (SF) formulations functionalized with copaiba oleoresin (CO) for use as bioactive packaging. Four different formulations were prepared using the casting method, varying the SF-CO concentrations from 0 to 15% (v/v) in the PVA matrix. The samples were characterized regarding morphology, nanotexture, physicochemical, and barrier properties. SEM images revealed the uniform morphology of the films, and AFM data allowed the quantification of surface characteristics such as uniformity and homogeneity, confirming the uniform distribution of SF-OC in the PVA matrix. All films showed high water absorption power (more than twice their mass weight), and the incorporation of SF-CO did not change the water vapor permeability rate of PVAF. In contrast, the solubility of PVAF decreases with SF-CO content. FTIR and UV-vis spectra confirmed the presence of SF-CO in PVAF and indicated possible intermolecular interactions between PVA and SF-CO. Finally, our findings suggest that the incorporation of SF-CO into the PVA matrix is a viable alternative for producing eco-friendly packaging.

Enhanced effects of slowly co-released TGF-β3 and BMP-2 from biomimetic calcium phosphate-coated silk fibroin scaffolds in the repair of osteochondral defects

Bioactive agents have demonstrated regenerative potential for cell-free bone tissue engineering. Nevertheless, certain challenges persist, including ineffective delivery methods and confined therapeutic potency. Here, we demonstrated that the biomimetic calcium phosphate coating system (BioCaP) could effectively uptake and slowly release the incorporated bioactive agents compared to the surface absorption system via osteoclast-mediated degradation of BioCaP coatings. The release kinetics were determined as a function of time. The release rate was stable without remarkable burst release during the first 1 day, followed by a sustained release from day 7 to day 19. Then, we developed the bi-functional BioCaP-coated silk fibroin scaffolds enabling the effective co-delivery of TGF-β3 and BMP-2 (SFI-T/SFI-B) and the corresponding slow release of TGF-β3 and BMP-2 exhibited superior potential in promoting chondrogenesis and osteogenesis without impairing cell vitality in vitro. The SFI-T/SFI-B scaffolds could improve cartilage and bone regeneration in 5 × 4 mm rabbit osteochondral (OC) defect. These findings indicate that the biomimetic calcium-phosphate coated silk fibroin scaffolds with slowly co-released TGF-β3 and BMP-2 effectively promote the repair of OC defects, hence facilitating the future clinical translation of controlled drug delivery in tissue engineering.Graphic