Fiber Diameter Research Articles

Development and Evaluation of Fucoidan-Loaded Electrospun Polyvinyl Alcohol/Levan Nanofibers for Wound Dressing Applications.

Wound dressing is an ancient technique for promoting healing, and modern technology has led to the development of advanced dressings that enhance patient care. Nanofiber-based wound dressings are a medical innovation with enhanced properties, including improved adhesion, reduced infection rates, and increased tissue regeneration. This article focuses on electrospun nanofibrous wound dressing materials produced using the widely adopted method of electrospinning. This article explores several parameters that influence fiber size, including electrical conductivity, electric potential, collector distance, viscosity, flow rate, and surface tension. With Fucoidan (FUC) loading, an increase in the fiber diameter of the control group from 310 nm to 395 nm was observed. This research also examines the use of Halomonas Levan (HL), a polysaccharide, and polyvinyl alcohol (PVA) polymer as wound dressing materials to enhance the mechanical properties of the latter. The incorporation of various concentrations of FUC into PVA-HL electrospun nanofibers yielded diverse effects on tensile strength: an enhancement was observed in the PVA-HL-10FUC formulation, while reductions were noted in the PVA-HL-13FUC and PVA-HL-15FUC formulations. The WST1 assay demonstrated that none of the samples exhibited cytotoxicity up to 72 h, as cell viability increased over time. In conclusion, nanofibrous PVA-HL structures loaded with FUC, which promote tissue regeneration and prevent infection, could be considered a novel wound dressing material.

A facile synthesis of pectin/red clover extract nanoemulsions and nanofibers

The aim of this article was to generate pectin(P)/red clover extract (RCE) nanoemulsions (NEs) and nanofibers via a simple and short procedure for potential applications in women’s health. To that end, stock aqueous RCE NEs were prepared first in the absence and presence of a surfactant mixture consisting of 1/3 Span® 80/Tween® 80 with the help of an ultrasonic homogenizer using various processing times (0, 1, 5, and 10 min). Droplet sizes of RCE NEs were measured and statistically evaluated. The most significant factor was revealed to be the presence of surfactant mixture. The minimum droplet size (51 ± 1 nm) could be achieved by determining the ultrasonication time as 5 min in the presence of the surfactant mixture. Stock aqueous RCE NEs were exploited for preparing pectin-containing RCE NEs. Independent of the surfactant mixture, addition of pectin increased the droplet sizes substantially (372–458 nm and 509–728 nm in the absence and presence of the surfactant mixture). Neat pectin nanofibers had fiber diameters of 389 ± 87 nm. However, addition of the RCE NEs led to fiber with larger diameters (569 ± 134 nm and 763 ± 188 nm in the absence and presence of the surfactant mixture, respectively).

Valorization of lignin-rich solid residues from different eucalyptus wood conversion processes as oil structurants via electrospinning

The growing demand for sustainable materials has been driving research towards the use of biopolymers from natural resources. This study explores the valorization of lignin-rich solid residues derived from different eucalyptus wood conversion processes, specifically autohydrolysis (AHL), steam-explosion (SEL), and kraft pulping (EKL), via electrospinning. The potential of these electrospun nanostructures as eco-friendly oil structurant is investigated for lubricant applications. Solutions of AHL, SEL, and EKL fractions in a 3:1 v/v trifluoroacetic acid (TFA)/N,N-dimethylformamide (DMF) binary solvent were prepared at concentrations of 0.015, 0.03, and 0.05 g/mL. AHL and SEL samples exhibited superior spinnability due to higher carbohydrate content and molecular weight and lower ash content. Increasing the solution concentration to 0.05 g/mL resulted in the consecution of larger average fiber diameters (up to 0.44 and 0.39 μm, for AHL and SEL, respectively) and reduced bead formation. Stable oleo-dispersions were achieved solely with electrospun homogeneous nanofiber mats, while nanostructures predominantly composed of electrosprayed particles, like those obtained with EKL produced physically unstable dispersions from which the oil readily separates. The rheological response and microstructure of oleo-dispersions were significantly affected by both the conversion process of eucalyptus wood and the spinning solution concentration. The rheological properties of the oleo-dispersions can be tailored by modifying the spinning solution concentration, with G′ values ranging from 5·102 to 5·104 Pa and consistency and flow indices roughly ranging from 90 to 990 Pa sn and from 0.06 to 0.19, respectively, depending on the nature of the lignin-rich fraction and the type of electrospun nanostructure employed. These results highlight the potential of electrospun nanostructures obtained from lignin-rich solid residues in advanced materials applications, promoting the valorization of waste streams derived from different biorefinery processes, as well as the development of novel environmentally friendly lubricants.

MicroRNA expression profiles reveal wool development and fineness regulation in Gansu alpine fine-wool sheep

The development of wool has a complex regulatory mechanism both influenced by genetic and environmental factors. MicroRNAs (miRNA) were involved in various biological processes of animals, and may play an important role in the regulation of wool development. In this study, we comprehensively analyzed and identified the histological parameters of hair follicles, as well as the miRNAs, target genes, pathways, and Gene Ontology terms related to wool fineness regulation and wool growth and development using HE staining and RNA-Seqs methods. Both coarse (group C, mean fiber diameter (MFD) = 22.26 ± 0.69 μm, n = 6) and fine (group F, MFD = 16.91 ± 0.29 μm, n = 6) of Gansu alpine fine-wool sheep with different wool fineness were used in this study. The results showed that the primary follicle diameter and secondary wool fiber diameter in group C were significantly higher than those in group F (P < 0.05). And the number of primary and secondary hair follicles in group C was significantly lower than that in group F (P < 0.05). Furthermore, a total of 67 DE miRNAs and 290 potential DE miRNAs target genes were screened in the skin tissues of sheep from groups F and C, and some potential target genes related to wool fineness regulation were screened, such as CDH2, KRT82, FOXN1, LOC101106296, KRT20, MCOLN3, KRT71, and TERT. These genes were closely related to Glutathione metabolism, epidermal cell differentiation, keratinization, and regulation of hair cycle. Moreover, the regulatory network of miRNAs-mRNAs suggested that miRNAs (miR-129-x, novel m0079-3p, miR-2484-z, novel m0025-5P, etc.) may play a key role in the wool development and wool fineness regulation of Gansu alpine fine-wool sheep. In summary, this study expands the existing miRNAs database and provides new information for studying the regulation of wool development in Gansu alpine fine wool sheep.

Influence of Fiber Dimensions on Bridging Performance of Polyvinyl Alcohol Fiber-Reinforced Cementitious Composite (PVA-FRCC)

This study investigates the influence of fiber dimensions on the bridging performance of polyvinyl alcohol fiber-reinforced cementitious composite (PVA-FRCC) through an experimental and analytical program. Bending tests, bridging law calculations, and section analysis are conducted. Bending tests of notched specimens of PVA-FRCC with six different PVA fiber dimensions are performed to determine the load–deflection (LPD) and bending moment–crack mouth opening displacement (CMOD) relationships. The fiber volume fraction for all PVA-FRCCs is set to 2%. It is found that the load capacity of PVA-FRCC with a 27 μm diameter fiber is much higher than that of the other fibers, and the load capacity decreases as the fiber diameter increases. The study proposes parameters for the characteristic points of the tri-linear model for the single-fiber pullout model as functions of diameter, bond fracture energy, elastic modulus, cross-sectional area, and perimeter of the fiber. These findings provide valuable insights into the behavior of PVA-FRCC under different fiber dimensions. Bridging law calculations are conducted to obtain tensile stress–crack width relationships using the developed single-fiber pullout models. The Popovics model for the complete tensile stress–crack width relationship is adopted to obtain a better fit with the bridging law calculation, and then section analysis is conducted. The bridging law calculation results show that the maximum tensile stress decreases as the fiber diameter increases. It is also determined that most of the smaller-diameter fibers ruptured, whereas the larger fiber diameters pulled out from the matrix. The section analysis results show good agreement with the maximum bending moments obtained from the bending test.

Rhamnus prinoides leaf extract loaded polycaprolactone-cellulose acetate nanofibrous scaffold as potential wound dressing: An in vitro study

Rhamnus prinoides leaf contains carbohydrates, saccharides, phenolic acids, and diterpenes with antibacterial, wound-healing, and anti-inflammatory properties. In this study, Rhamnus prinoides leaf extract was successfully incorporated into polycaprolactone-cellulose acetate (PCL-CA) nanofibers through electrospinning technique for the first time. The mats' morphology, diameter, chemical, and crystalline structure were characterized. The study investigated the mats' antibacterial activity, wound healing, cytotoxicity, drug release behaviour, hydrophilicity, and water absorbency properties. The results revealed that the mats exhibited continuous, smooth, without-beads, and interconnected structures, with average fiber diameters ranging from 385 ± 21 nm to 332 ± 74 nm. The antibacterial effeciency was remarkable against S. aureus and E. coli, achieving bacterial reduction percentages exceeding 99 % at concentrations of 3 % and above against S. aureus and 5 % and above against E. coli. Cytotoxic tests showed low-cytotoxicity up to an extract concentration of 7 %. The extract release increases with an increase in concentration. In vitro wound healing assay, the mats enhanced cell migration to the wound area. Additionally, the incorporation of Rhamnus prinoides significantly improved the hydrophilicity and water absorbency of the nanofibers. Overall, the study highlights the mats' broad antimicrobial and wound healing properties with less cytotoxicity, hydrophilicity, and water absorbency, making them promising for use as wound dressings.

Exploring the Molecular Mechanism of Skeletal Muscle Development in Ningxiang Pig by Weighted Gene Co-Expression Network Analysis.

With the continuous improvement in living standards, people's demand for high-quality meat is increasing. Ningxiang pig has delicious meat of high nutritional value, and is loved by consumers. However, its slow growth and low meat yield seriously restrict its efficient utilization. Gene expression is the internal driving force of life activities, so in order to fundamentally improve its growth rate, it is key to explore the molecular mechanism of skeletal muscle development in Ningxiang pigs. In this paper, Ningxiang boars were selected in four growth stages (30 days: weaning period, 90 days: nursing period, 150 days: early fattening period, and 210 days: late fattening period), and the longissimus dorsi (LD) muscle was taken from three boars in each stage. The fatty acid content, amino acid content, muscle fiber diameter density and type of LD were detected by gas chromatography, acidolysis, hematoxylin eosin (HE) staining and immunofluorescence (IF) staining. After transcription sequencing, weighted gene co-expression network analysis (WGCNA) combined with the phenotype of the LD was used to explore the key genes and signaling pathways affecting muscle development. The results showed that 10 modules were identified by WGCNA, including 5 modules related to muscle development stage, module characteristics of muscle fiber density, 5 modules characteristic of muscle fiber diameter, and a module characteristic of palmitoleic acid (C16:1) and linoleic acid (C18:2n6C). Gene ontology (GO) enrichment analysis found that 52 transcripts relating to muscle development were enriched in these modules, including 44 known genes and 8 novel genes. The Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis showed that these genes were enriched in the auxin, estrogen and cyclic guanosine monophosphate-protein kinase G (cGMP-PKG) pathways. Twelve of these genes were transcription factors, there were interactions among 20 genes, and the interactions among 11 proteins in human, pig and mouse were stable. To sum up, through the integrated analysis of phenotype and transcriptome, this paper analyzed the key genes and possible regulatory networks of skeletal muscle development in Ningxiang pigs at various stages, to provide a reference for the in-depth study of skeletal muscle development.

The influence of genotype and sex on carcass composition, meat quality, digestive system morphometry and leg bone dimensions in Japanese quails (C. coturnix japonica)

Japanese quails (Coturnix japonica) have a high reproductive rate because they reach sexual maturity very early. This short rearing time results in increasing interest among breeders and consumers. The aim of the study was a comparative analysis of two genotypes and sexes of Japanese and Pharaoh quails and their impact on body weight, carcass composition, meat quality, digestive system morphometry and leg bone dimensions. The study involved 40 birds (10 females and 10 males), Japanese quail and Pharaoh quail, 42 days old. Quail genotype had an effect (P < 0.05) on body weight, carcass weight, and some percentage of carcass elements. In addition, there was a significant effect of quail genotype on intramuscular fat and water content of pectoral and leg muscles. The origin of the quails interacted (P < 0.05) with the lightness (L*), yellowness (b*), cutting work, hardness, springiness, chewiness, gumminess, fibre cross-sectional area, vertical fibre diameter, and perimysium thickness of pectoral muscle. In addition, genotype was found to influence some anatomical traits, such as the percentage of proventriculus, heart, and liver on body weight, lengths and diameters of duodenum, caeca, and colon, and most dimensions of leg bones (femur and tibia). The sex of the birds significantly (P < 0.05) affected body weight, carcass weight, percentage of skin with subcutaneous fat in the carcass, as well as water content, lightness (L*), and springiness, most microstructure characteristics of pectoralis muscle, and also water and protein contents, and yellowness (b*) of leg muscles. In addition, differences were found between males and females (P < 0.05) in terms of duodenum and caeca diameter, length of greatest and medial femur, and greatest length of tibia. It can be stated that in terms of body weight and carcass weight as well as some meat quality features (protein content, fat content, fiber cross-sectional area), the pharaoh quail was the better genotype, while in terms of the proportion of muscles in the carcass and selected meat quality features: hardness, gumminess, chewiness, Japanese quails turned out to be better.

Cleaner and Sustainable Production of Core-Sheath Polymer Fibres.

The amalgamation of sustainable practises throughout the fabrication process with advanced material engineering holds promise not only for eco-conscious manufacturing but also for promoting technological advancements in versatile material design and application. Moreover, technological innovation serves as a catalyst for sustainability initiatives, driving innovation and enabling the adoption of greener practises across industries. This study investigates redefining the production protocol of pressure spinning to produce core-sheath polymer fibres, deepening sustainable practises. It aims to explore innovative approaches such as modifying spinning parameters, optimising polymer solvent configurations and understanding fluid behaviour to curtail material wastage and maintain minimal energy consumption without compromising production efficiency. Utilising Polyvinylpyrrolidone (PVP) for the core and Polyethylene oxide (PEO) for the sheath, production rates of up to 64 g/h were achieved with a fibre diameter range of 3.2 ± 1.7 µm to 4.6 ± 2.0 µm. Energy consumption per mass of fibres produced showed a decreasing trend overall with increasing applied gas pressure. These findings highlight the potential for the efficient and scalable production of core-sheath fibres with applications in various advanced materials fields.

Alpha-linolenic acid/linoleic acid ratio can effectively promote muscle growth and protein deposition in grass carp (Ctenopharyngodon idella)

Polyunsaturated fatty acids (PUFAs) promoted the muscle structure (muscle fiber cross-sectional area and diameter, as well as thickness of the connective tissue surrounding muscle fibers-endomysium) and taste (fishy) of fillets. As members of the omega-3 and omega-6 PUFA family, alpha-linolenic acid (ALA) and linoleic acid (LNA) have important functions. This study explores influences of ALA/LNA ratio on muscle growth and protein deposition and its mechanisms. Six different diets containing ALA/LNA ratios (0.03, 0.47, 0.92, 1.33, 1.69, and 2.15) were fed to grass carp (Ctenopharyngodon idella) for 9 weeks. Results showed that according to the quadratic regression model, the optimal ALA/LNA ratios of grass carp were 1.12 and 1.22 using malondialdehyde content and muscle fiber diameter as indicators, respectively. Optimum ALA/LNA ratio promoted hypertrophy of myofibers, which might be attributed to genes related to myofiber development (myogenic determinant, myogenin, myosin heavy chain, myogenic regulatory factor 4 and myogenic factor 5). Optimum ALA/LNA ratio enhanced protein deposition, which might be associated with the promotion of protein synthesis (insulin-like growth factors-1, phosphoinositide 3-kinase, target of rapamycin), and inhibition of the ubiquitin-proteasome system and autophagy-lysosome system to inhibit protein degradation. In addition, optimum ALA/LNA ratio enhanced muscle amino acid composition and antioxidant capacity of fish.

Controlled Release of Curcumin and Hypocrellin A from Electrospun Poly(l-Lactic Acid)/Silk Fibroin Nanofibers for Enhanced Cancer Cell Inhibition.

Nanofibers have emerged as a highly effective method for drug delivery, attributed to their remarkable porosity and ability to regulate drug release rates while minimizing toxicity and side effects. In this study, we successfully loaded the natural anticancer drugs curcumin (CUR) and hypocrellin A (HA) into pure poly(l-lactic acid) (PLLA) and PLLA-silk protein (PS) composite nanofibers through electrospinning technology. This result was confirmed through comprehensive analysis involving SEM, FTIR, XRD, DSC, TG, zeta potential, and pH stability analysis. The encapsulation efficiency of all samples exceeded 85%, demonstrating the effectiveness of the loading process. Additionally, the drug release doses were significantly higher in the composites compared to pure PLLA, owing to the enhanced crystallinity and stability of the silk proteins. Importantly, the composite nanofibers exhibited excellent pH stability in physiological and acidic environments. Furthermore, the drug-loaded composite nanofibers displayed strong inhibitory effects on cancer cells, with approximately 28% (HA) and 37% (CUR) inhibition of cell growth and differentiation within 72 h, while showing minimal impact on normal cells. This research highlights the potential for controlling drug release through the manipulation of fiber diameter and crystallinity, paving the way for wider applications of electrospun green nanomaterials in the field of medicine.

Graphene Oxide‐Incorporated Polylactic Acid/Polyamidoamine Dendrimer Electroconductive Nanocomposite as a Promising Scaffold for Guided Tissue Regeneration

AbstractIn the recent years, electroconductive scaffolds have shown promising capabilities in guided regeneration of electroactive tissues including nerve, heart muscle, bone, cartilage, and skin. Herein, the fabrication of a novel electroconductive poly (L‐lactic acid) (PLLA)/polyamidoamine (PAMAM) dendrimer nanofibrous scaffold containing graphene oxide (GO) nanosheets is described. The presence of PAMAM with amine terminal groups successfully aminolyzed PLLA. Interestingly, both PAMAM (5% w/w) and GO (0.5, 1, 2% w/w) not only contributed to reducing the fiber diameter, increasing the hydrophilicity and degradation rate, but also provided a nanocomposite scaffold with enhancement in electrical conductivity. By incorporating 1% w/w of GO, the nanocomposite scaffold exhibited optimized properties, including electrical conductivity (≈3.09 × 10−5 S m−1), crystallinity (≈ 47%), Young's modulus (≈16.95 MPa), as well as strength (≈1.58 MPa). This nanocomposite also demonstrated significant antibacterial activity of ≥ 90% against both gram‐positive and gram‐negative bacteria. Cellular assays confirmed acceptable cytocompatibility of the nanocomposite scaffolds containing GO and PAMAM, which can support the viability and proliferation of PC‐12 cells. In conclusion, the presence of GO nanosheets alongside PAMAM dendrimers can synergically promote the properties of the prepared nanofibrous mats which can be used as potential electroconductive scaffolds for guided tissue regeneration.

Development of quaternized agar-based materials for the coronavirus inactivation

The COVID-19 pandemic has revealed weaknesses in healthcare systems and underscored the need for advanced antimicrobial materials. This study investigates the quaternization of agar, a seaweed-derived polysaccharide, and the development of electrospun membranes for air filtration in facemasks and biomedical applications. Using the betacoronavirus MHV-3 as a model, quaternized agar and membranes achieved a 90–99.99 % reduction in viral load, without associated cytotoxicity. The quaternization process reduced the viscosity of the solution from 1.19 ± 0.005 to 0.64 ± 0.005 Pa.s and consequently the electrospun fiber diameter ranged from 360 to 185 nm. Membranes synthesized based on polyvinyl alcohol and thermally cross-linked with citric acid exhibited lower water permeability. Avoiding organic solvents in the electrospinning technique ensured eco-friendly production. This approach offers a promising way to develop biocompatible and functional materials for healthcare and environmental applications.

Fabrication of electrospun ion exchanger adsorbents with morphologies designed for the separation of proteins and plasmid DNA

Electrospun cellulose adsorbents are an emergent class of materials applied to a variety of bioprocess separations as an analogue to conventional packed bed chromatography. Electrospun adsorbents have proven to be effective as rapid cycling media, enabling high throughput separation of proteins and viral vectors without compromising selectivity and recovery. However, there is a current lack of knowledge in relation to the manipulation and control of electrospun adsorbent structure with function and performance to cater to the separation needs of emerging, diverse biological products.In this study, a series of electrospun cellulose adsorbents were fabricated by adjusting their manufacturing conditions. A range of fiber diameters (400 to 600 nm) was created by changing the electrospinning polymer solution. Additionally, a range of porosities (0.4 to 0.7 v/v) was achieved by varying the laminating pressures on the electrospun sheets. The adsorbents were functionalized with different degrees of quaternary amine ligand density to create 18 prototype anion exchangers. Their morphology was characterized by BET nitrogen adsorption surface area, X-ray computed tomography, capillary flow porometry and scanning electron microscopy measurements.The physical characteristics of the adsorbents were used in an adapted semi-empirical model and compared to measured permeability data. Permeabilities of prototypes ranged from 10−2 to 10−4 mDarcy. The measured data showed good adherence to modelled data with possible improvements in acquiring wet adsorbent characteristics instead of dried material. Finally, the electrospun adsorbents were characterized for their binding capacity of model proteins of different sizes (diameters of 3.5 nm and 8.9 nm) and plasmid DNA. Static binding capacities ranged from 5 mg/ml to 25 mg/ml for the proteins and plasmid DNA and showed <20 % deviation from monolayer coverage based on BET surface area. Therefore, it was concluded that the electrospun adsorbents most likely adsorb monolayers of proteins and plasmid DNA on the surface with minimal steric hindrance.

Effect of balanced vs. standard protein on muscle mass development in exercising horses.

Twelve horses weighing 570 ± 35kg were split into two groups (standard protein, STD, and balanced protein, BAL) to evaluate the effect of balanced vs. unbalanced protein on muscle mass. Groups were fed grass hay and a 12% CP feed (one formulated for balanced protein). Horses were out of work for 14wk prior and participated in 1 to 2h of light-to-moderate exercise 5d/wk for 12wk. A 4-d total urine and feces collection period was conducted at the start and end of the study. Urine and feces samples were analyzed for nitrogen (N) to calculate N balance. Muscle mass status was evaluated using histochemistry, muscle scoring, and body measurements at the start and end of the study. Muscle biopsies were analyzed for free amino acid concentrations. An ANOVA was done using the Proc MIXED function of SAS (2006). Nitrogen retention was greater and urine nitrogen as a percent of intake less for the STD group at the end of the study (P = 0.01). Muscle free concentrations of methionine, leucine, phenylalanine, and arginine were greater in the BAL group at the end of the study compared to the STD group (P < 0.04) while muscle free histidine, threonine, and valine were less for the STD group at the end of the study compared to the start of the study (P < 0.05). Muscle fiber diameters were greater at the start of the study for the STD group (P = 0.004) but greater for the BAL group at the end of the study (P = 0.001). There is some evidence of improved muscle mass for the BAL group with greater muscle free amino acids (arginine, leucine, methionine, phenylalanine, and valine) as well as greater type II muscle fiber areas and diameters. While changes did not appear evident between groups at the "whole body" level, changes at the tissue level appear more evident.

Effect of precursor amino acids for carnosine synthesis on breast fiber microstructures and myofiber differentiation-related gene expression in slow-growing chicken.

: The effects of carnosine synthesis on the structural and microstructural determinants of meat quality have not been studied to date. Therefore, this study aimed to investigate the effect of supplementation with carnosine synthesis precursors on the characteristics and microstructure of breast muscle fibers in slow-growing Korat chickens (KR). : Slow-growing KR were fed a non-supplemented commercial diet (control group) or a commercial diet supplemented with 1.0% β-alanine, 0.5% L-histidine, or a combination of both 1.0% β-alanine and 0.5% L-histidine. At 10 weeks, KR were slaughtered, and the breast muscle was collected. Samples were fixed and extracted to study the microstructure, fat level, and porosity of the meat using X-ray and scanning electron microscopy, and real-time polymerase chain reaction was performed to analyze the expression of genes related to myofiber differentiation. : L-histidine supplementation significantly altered myofiber diameter and muscle fiber density and compactness by regulating muscle fiber-type differentiation via carnosine synthase (CARNS1) and myocyte enhancer factor 2C (MEF2C) expression, as well as myogenic differentiation antigen (MyoD) and myogenic regulatory factor 5 (Myf5) expression. While excess L-histidine potentially stimulated CARNS1 to modify muscle fiber arrangement and tenderness in breast meat, dietary β-alanine supplementation alone or in combination with L-histidine supplementation induced a relatively less remarkable but not significant (p<0.05) effect on the breast meat characteristics studied. : Interestingly, the combination of β-alanine and L-histidine supplementation had no effect on meat microstructure, meat porosity, and fat content in comparison with the control group. Thus, this combination had the best selectivity for improving meat quality. However, further studies are required to clarify the effects of carnosine levels on meat processing.

Anisotropic Hydrogel Microelectrodes for Intraspinal Neural Recordings in vivo.

Creating durable, motion-compliant neural interfaces is crucial for accessing dynamic tissues under in vivo conditions and linking neural activity with behaviors. Utilizing the self-alignment of nano-fillers in a polymeric matrix under repetitive tension, here, we introduce conductive carbon nanotubes with high aspect ratios into semi-crystalline polyvinyl alcohol hydrogels and create electrically anisotropic percolation pathways through cyclic stretching. The resulting anisotropic hydrogel fibers (diameter of 187 ± 13 μm) exhibit fatigue resistance (20,000 cycles at 20% strain) with a stretchability of 64.5 ± 7.9%, and low electrochemical impedance (900 ± 149 kΩ @ 1kHz). We observe the re-constructed nanofillers' axial alignment and a corresponding anisotropic impedance decrease along the direction of cyclic stretching. We fabricate fiber-shaped hydrogels into bioelectronic devices and implant them into wild-type and transgenic Thy1-ChR2-EYFP mice to record electromyographic signals from muscles in anesthetized and freely moving conditions. These hydrogel fibers effectively enable the simultaneous recording of electrical signals from ventral spinal cord neurons and the tibialis anterior muscles during optogenetic stimulation. Importantly, the devices maintain functionality with repeatable recording results over eight months after implantation, demonstrating their durability and potential for long-term monitoring in neurophysiological studies.

Design and Fabrication of Sustained Bacterial Release Scaffolds to Support the Microbiome.

Fibres in the micro- and nanometre scale are suited to a broad range of applications, including drug delivery and tissue engineering. Electrospinning is the manufacturing method of choice, but it has some limitations. Novel pressure-driven fibre-forming techniques, like pressurised gyration (PG), overcome these limitations; however, the compatibility of PG with biological materials has not yet been evaluated in detail. For the first time, this limitation of PG was investigated by optimising PG for microbial cell processing and incorporating bacterial cultures into fibrous polymeric scaffolds for sustained release. Multiple polymer-solvent systems were trialled, including polyvinylpyrrolidone (PVP)/phosphate-buffered saline (PBS) 25% w/v, polyethylene oxide (PEO)/PBS 20% w/v, and PVP/ethanol 20% w/v. Rheological studies revealed the surface tension of the PVP/PBS, PEO/PBS, and PVP/ethanol polymer-solvent systems to be 73.2, 73.9, and 22.6 mN/m, respectively. Scanning electron microscopy showed the median fibre diameters to be between 9.8 μm and 26.1 μm, with PVP producing larger fibres. Overnight Bacillus subtilis cultures were then incorporated into the chosen polymeric solutions and processed into fibres using PG. The produced cell-loaded fibres were incubated in LB broth to assess the cell viability of the encapsulated cells. Colony counts post-incubation showed the PVP/PBS 25% fibres resulted in 60% bacterial growth, and PEO/PBS 20% fibres led to 47% bacterial growth, whereas PVP/ethanol 20% fibres did not lead to any bacterial growth. Based on the results gathered during this study, it can be concluded that PG offers a promising way of encapsulating cells and other sensitive biological products while having many notable advantages compared to electrospinning. This research demonstrates proof of concept research-based evidence and showcases the potential of pressurised gyration as a key disruptive innovation in probiotic delivery system design and manufacturing.

Scanning electron microscopy-based quantification of keratin and hyaluronic acid microstructure in electrospun scaffolds

BackgroundThe extracellular matrix (ECM) structural deficiencies in chronic wounds prevent the wounds from healing through natural physiological processes. Electrospun biocompatible polymers offer a platform to produce microstructure wound dressing materials that mimic the ECM containing various bioactives to address the deficiencies in the chronic wound healing process. Quantitative characterization of the electrospun fiber microstructure could provide valuable information on using fiber constructs to facilitate wound healing. This work employed a validated image analysis tool to quantitatively explain various parameters for the microstructure of six electrospun fiber constructs, D1{Polycaprolactone (PCL), Polyvinyl alcohol (PVA), Keratin}, D2{PCL, PVA, keratin, Co-enzyme Q10 (CoQ10)}, D3 (PCL, PVA, keratin, mupirocin), D4 (PCL, PVA, keratin, CoQ10, mupirocin, valsartan), D5 {PVA, Hyaluronic acid (HA)}, and D6 (PVA), using scanning electron microscopy imaging modality.ResultsThe fiber intersection density (FID) parameter was quantified in the formulations, e.g., 0.272% for D5 and 0.416% for D4. Orientation histograms for D1 and D6 are characteristic of isotropic materials, while orientations for D2 and D3 indicate anisotropy with 2 preferred orientations in each formulation. D4 and D5 present orientations characteristic of transversely isotropic materials. The tortuosity for D2 and D4 indicates almost straight fiber segments, in contrast with undulated fiber segments in all other formulations. Furthermore, the mean fiber diameter was quantified, e.g., 1.414 and 1.630 mm for D3 and D4, respectively.ConclusionCo-electrospun PVA/PCL microfibers offer great potential for controlled delivery of bioactives needed to accelerate the healing of chronic wounds. This image-based analysis technology quantitatively characterized different formulations of electrospun fiber scaffolds. This analysis sets the stage for future study that utilizes microstructural information in finite element biomechanical modeling, to investigate possible influence of structure-based mechanical factors on the ECM restorative potential of wound dressings. Adjustment of electrospinning conditions could produce fabricated constructs like the native ECM structural components with a functional role in wound healing.

Effects of KRTAP20-1 Gene Variation on Wool Traits in Chinese Tan Sheep.

Chinese Tan sheep lambs are recognised for having tight 'spring-like' curly wool when young, but this phenotype disappears with age. This wool consists of shorter, fine wool fibres (which are usually unmedullated) and heterotypic hair fibres (which are frequently medullated), which are referred to as 'halo hair'. Both the wool and hair fibres consist of α-keratin proteins embedded in a keratin-associated protein (KAP) matrix. Of these KAPs, the KAP20-1 gene (designated KRTAP20-1) and its effect on four fibre traits (mean fibre curvature, mean fibre diameter, fibre diameter standard deviation, and coefficient of variation of fibre diameter) of Tan lambs was studied. Seven previously identified KRTAP20-1 variants (A, B, D, E, F, G, and H) of KRTAP20-1 were revealed, but the previously identified variant C was not present. Of the seven variants detected, only two (A and G) were common and present at frequencies greater than 5%, and the effect of these on the fibre traits of the finer wool fibres was assessed. It was found that variant G was associated with an increased mean fibre curvature in these wool fibres. This suggests that KRTAP20-1 might possibly be expressed differentially in the two fibre types, which may be of future value in breeding.