Fiber Configuration Research Articles

Study of FRP on Preloaded Beam as A Method of Retrofitting - A Review

Over the past two decades, fiber-reinforced polymers have gained prominence in structural engineering due to their unique properties, offering an alternative to traditional materials like steel and concrete. FRPs consist of high-strength fibers embedded in a polymer matrix, resulting in superior strength-to-weight ratios, excellent corrosion resistance, and fatigue durability. These materials are widely used in aerospace, automotive, and infrastructure applications. Key types of FRPs include carbon fiber reinforced polymer, glass fiber reinforced polymer, aramid fiber reinforced polymer, and basalt fiber reinforced polymer, each offering specific advantages. CFRP is recognized for its high tensile strength, while GFRP is widely chosen for its affordability and adequate performance in less demanding structural applications. This review paper focuses on retrofitting predamaged reinforced concrete beams using carbon fiber-reinforced polymer and glass fiber-reinforced polymer sheets. It examines how preloading, fiber material, and fiber arrangement affect the structural performance of these beams, particularly in terms of flexural strength, ductility, stiffness, and failure mechanisms. Going through several papers the studies showed that CFRP and GFRP significantly enhance load-bearing capacity, energy absorption, and delay failure due to deboning. Key factors such as preload levels and fiber configuration were compared by go thronging several paper. The paper highlights real-world applications, where CFRP is commonly used in bridge rehabilitation and GFRP is favored for less demanding tasks, such as retrofitting low-rise building beams, both playing a critical role in extending the service life of structures while reducing costs.

Engineering interfacial molecular interactions on Ag Hollow fibre gas diffusion electrodes for high efficiency in CO2 conversion to CO.

The electrochemical CO2 reduction reaction (CO2RR) occurs at the nanoscale interface of the electrode-electrolyte. Therefore, tailoring the interfacial properties in the interface microenvironment provides a powerful strategy to optimise the activity and selectivity of electrocatalysts towards the desired products. Here, the microenvironment at the electrode-electrolyte interface of the flow-through Ag-based hollow fibre gas diffusion electrode (Ag HFGDE) is modulated by introducing surfactant cetyltrimethylammonium bromide (CTAB) as the electrolyte additive. The porous hollow fibre configuration and gas penetration mode facilitate the CO2 mass transfer and the formation of the triple-phase interface. Through the ordered arrangement of hydrophobic long-alkyl chains, CTAB molecules at the electrode/electrolyte interface promoted CO2 penetration to active sites and repelled water to reduce the activity of competitive hydrogen evolution reaction (HER). By applying CTAB-containing catholyte, Ag HFGDE achieved a high CO Faradaic efficiency (FE) of over 95 % in a wide potential range and double the partial current density of CO. The enhancement of CO selectivity and suppression of hydrogen was attributed to the improvement of charge transfer and the CO2/H2O ratio enhancement. These findings highlight the importance of adjusting the local microenvironment to enhance the reaction kinetics and product selectivity in the electrochemical CO2 reduction reaction CO2RR.

Multiscale Fiber Remodeling in the Infarcted Left Ventricle using a Stress-Based Reorientation Law

The organization of myofibers and extra cellular matrix within the myocardium plays a significant role in defining cardiac function. When pathological events occur, such as myocardial infarction (MI), this organization can become disrupted, leading to degraded pumping performance. The current study proposes a multiscale finite element (FE) framework to determine realistic fiber distributions in the left ventricle (LV). This is achieved by implementing a stress-based fiber reorientation law, which seeks to align the fibers with local traction vectors, such that contractile force and load bearing capabilities are maximized. By utilizing the total stress (passive and active), both myofibers and collagen fibers are reoriented. Simulations are conducted to predict the baseline fiber configuration in a normal LV as well as the adverse fiber reorientation that occurs due to different size MIs. The baseline model successfully captures the transmural variation of helical fiber angles within the LV wall, as well as the transverse fiber angle variation from base to apex. In the models of MI, the patterns of fiber reorientation in the infarct, border zone, and remote regions closely align with previous experimental findings, with a significant increase in fibers oriented in a left-handed helical configuration and increased dispersion in the infarct region. Furthermore, the severity of fiber reorientation and impairment of pumping performance both showed a correlation with the size of the infarct. The proposed multiscale modeling framework allows for the effective prediction of adverse remodeling and offers the potential for assessing the effectiveness of therapeutic interventions in the future. Statement of SignificanceThe organization of muscle and collagen fibers within the heart plays a significant role in defining cardiac function. This organization can become disrupted after a heart attack, leading to degraded pumping performance. In the current study, we implemented a stress-based fiber reorientation law into a computer model of the heart, which seeks to realign the fibers such that contractile force and load bearing capabilities are maximized. The primary goal was to evaluate the effects of different sized heart attacks. We observed substantial fiber remodeling in the heart, which matched experimental observations. The proposed computational framework allows for the effective prediction of adverse remodeling and offers the potential for assessing the effectiveness of therapeutic interventions in the future.

A study on interactive fiber rubber composite structures subjected to bend-twist coupling

Abstract This paper investigates the deformation behavior of shape memory alloy (SMA)-integrated fiber-reinforced composites, with an emphasis on how different fiber orientations influence bend-twist coupling. The study combines experimental analysis, finite element simulations using Ansys, and analytical modeling via Classical Laminate Theory (CLT) to assess the mechanical response of these composites. The experiments revealed that composites with higher fiber angles (60°) exhibited dominant twisting behavior, while those with lower angles (30° and 45°) showed more pronounced bending deformation. The simulations corroborated these trends, offering detailed insights into the displacement behavior. The CLT model further predicted a decrease in deflection with increasing fiber angles, which was consistent with experimental results, although some deviations in Z-deformation were attributed to material and manufacturing factors. This research highlights the critical role of fiber orientation in achieving desired deformations in SMA-integrated composites, offering valuable insights for the design of adaptive structures. The findings demonstrate the potential for optimizing fiber configurations to tailor bend-twist coupling in advanced composite applications.

Outcomes of CEM43 in Predicting Thermal Damage Induced by Focal Laser Ablation in Controlled Ex Vivo Experiments: A Comparison to Histology and MRI.

Focal laser ablation (FLA) serves as a targeted therapy for prostate cancer (PCa). Clinical studies have demonstrated significant variations in ablation volumes with consistent fiber configurations. Consequently, a prediction model is needed for the safe application of FLA in treating PCa. This study aimed to evaluate the reproducibility of FLA-induced temperature profiles in controlled ex vivo experiments using clinical laser treatment protocols. Additionally, it sought to examine the effectiveness of the CEM43 model in predicting the zone of irreversible damage (ZID) and to compare these findings with outcomes derived from the Arrhenius model. Freshly excised postmortem human prostate and porcine liver specimens were used for controlled ex vivo ablation. Tissues were secured in a Perspex sample holder for precise placement of the laser fiber and thermocouples. FLA was conducted with a 1064-nm Nd:YAG laser at 3 W in continuous-wave mode for 10 min. Pre- and post-FLA 3D T1-weighted 7 T MRI scans were obtained to assess the treatment area. Whole-mount hematoxylin and eosin histological slides were prepared and digitized. On histology, the ZID was defined as the total of vaporized, carbonized, and coagulated tissue. A 2D thermal development map was created from temperature data, using bi-cubic interpolation. The cumulative equivalent thermal isoeffect dose at 43°C in minutes (CEM43) model was applied to predict the ZID, with 240 equivalent minutes (240-CEM43) used as the damage threshold. Additionally, the Arrhenius thermal model was used for comparison of CEM43 results. Predicted ZIDs were compared to MRI and histology. FLA treatment was performed on ex vivo human prostate samples (n = 2) and porcine liver specimens (n = 5). For human prostate tissue, FLA did not result in an identifiable ZID upon histological macroscopic examination or a lesion on MRI. Ex vivo porcine liver samples showed a clearly demarcated oval-shaped hyperintense lesion surrounding the laser fiber tip on post-FLA MRI. The MRI lesion (range 1.6-2.1 cm2) corresponded with the shape and location of the ZID on histology, but was smaller (median 1.7 vs. 3.2, p = 0.02). Histological examination of porcine liver samples revealed ZIDs ranging from 2.1 to 4.1 cm2, whereas 240-CEM43-predicted ZIDs ranged from 3.3 to 3.8 cm2. Although the median 240-CEM43-predicted ZID was not significantly larger than the histology ZID (3.8 vs. 3.2 cm2, p = 0.22), it tended to overpredict the histological results in most experiments. The median Arrhenius-predicted ZID was similar to the histologicalZID (3.2 vs. 3.2 cm2, p = 0.56), but varied in size when comparing individual experiments (range 2.5-3.2 cm2). FLA on ex vivo human prostate showed no thermal damage on histopathology or MRI. Ex vivo porcine liver FLA resulted in identifiable ZID on histology and lesions on MRI. 240-CEM43 generally overestimated the ZID and had less variability compared to histology. Results from the Arrhenius model were in better agreement with the histology findings, but still did not predict the individual FLA-induced histological thermal damage. Inter-experiment ZID variability underlines the need for developing a more comprehensive predictive dosimetry model for FLA in PCa treatment.

Strong dipole-dipole interactions via enhanced light-matter coupling in composite nanofiber waveguides

We study the interaction of emitters with a composite waveguide formed from two parallel optical nanofibers in regimes of experimental importance for atomic gases or solid-state emitters. Using the exact dyadic Green's function we comprehensively investigate the coupling efficiency and the fiber-induced Lamb shift accounting for variations in emitter positions and fiber configurations. This reveals coupling efficiencies and Purcell factors that are enhanced considerably beyond those using a single fiber waveguide, and robustness in the figures of merit. We finally investigate resonant dipole-dipole interactions and the generation of entanglement between two emitters mediated through the composite waveguide under excitation. We show that the concurrence can be enhanced for two fiber systems, such that entanglement may be present even in cases where it is zero for a single fiber. All-fiber systems are simple in construction and benefit from a wealth of existing telecommunications technologies, while enjoying strong couplings to emitters and offering interesting light-matter functionalities specific to slot waveguides. Published by the American Physical Society 2024

4D printing bio-inspired chiral metamaterials for flexible sensors

Chiral metamaterials were a typical metamaterial configuration, which had broad application prospects in vibration isolation, energy absorption and other fields. Although 4D-printed chiral metamaterials have been investigated by introducing stimulus-responsive materials to achieve programmable properties of metamaterials, chiral metamaterials are mostly fabricated by single materials, which limits the adjustable domains of the mechanical properties and the design freedom of metamaterials. In this work, inspired by the configuration of collagen fibers of biological tissues, the bio-inspired chiral metamaterials with wave ligaments were developed. The bi-phase (TPE@PLA-SMP) composite chiral metamaterials were fabricated by combining active phase (shape memory polylactic acid, PLA-SMP) with passive phase (thermoplastic elastomer, TPE). The influences of geometric parameters, ligament gradient forms, and TPE distribution modes on the mechanical properties of the developed metamaterials were characterized. When the TPE was distributed at 0° and 45°, the deformation of the mechanical metamaterials occurred mainly in the TPE cells, resulting in the J-shaped displacement-force curve. The programmable and reconfigurable properties of the metamaterials (including configuration, and energy absorption performance) under thermal stimulation were demonstrated. The specific energy absorption (SEA) of the metamaterial 2θ = π/2 was realized to transform between 0.92 kJ/kg and 0.38 kJ/kg by shape memory programming. Flexible sensors based on TPE@PLA-SMP composite metamaterials were developed by filling CNC-CNT@PVA composite hydrogels (minimum resistivity 8.1 Ω m), which enabled stable output of electrical signals under repeated loads. A motion state monitor was developed and realized to monitor the wearer's movement such as running, demonstrating its potential application prospects in fields such as flexible electronics.

Ultrahigh-channel-count OAM mode conversion utilizing a hybrid few-mode fiber configuration.

We propose and demonstrate a hybrid few-mode fiber configuration (HFMFC) that enables ultrahigh-channel-count orbital angular momentum (OAM) mode conversion. The HFMFC consists of periodically twisted graded-index few-mode fiber segments and a step-index few-mode fiber segment. Our proposed HFMFC-based multichannel OAM mode converter (OAM-MC) offers an exceptionally high channel count in a wide bandwidth, with customizable channel spacing down to 50 GHz (∼0.4 nm), achieved through optimization of the structural parameters of the HFMFC. By employing this methodology, we have successfully demonstrated 10, 32, 117, and 233 channel OAM mode conversions covering the entire C + L band, representing the highest performance among all reported fiber-based multichannel OAM-MCs to date, for the first time to the best of our knowledge. The suggested ultrahigh-channel-count OAM-MC exhibits promising potential for applications in various fields such as OAM fiber communication, OAM holography, OAM information processing, and OAM metrology.

An experimental investigation into crashworthiness of filament wound intra-yarn hybrid glass/jute epoxy composites tubes under quasi-static axial and lateral compression

The increasing demand for sustainable materials in the automotive industry has driven the research towards exploration of natural fiber composites for crash structures. This study investigates the quasi-static axial and lateral crushing behavior of hybrid glass/jute fiber epoxy tubes. Intra-yarn hybrid mixing ratios of jute and glass fibers were tested to evaluate the feasibility of using natural fibers as eco-friendly alternatives to traditional synthetic composites. A total of five different configurations were fabricated using filament winding process. The experimental results were analyzed for collapsing behavior, failure modes, and energy absorption characteristics. The hybrid epoxy tubes revealed fiber-matrix fracturing, local buckling, and delamination as three primary failure modes under crushing tests. The hybrid configuration with 25 % jute fiber and 75 % glass fiber demonstrated optimal crashworthiness performance, achieving the highest specific energy absorption (SEA) values of 15.85 J/g under axial loading and 2.96 J/g under lateral loading. The configurations with higher jute content of 50 % and 75 %, showed decreasing SEA and crush force efficiency (CFE) values, with brittle fracturing and delamination as dominant failure modes, indicating a trade-off between weight and energy absorption efficiency. The neat glass fiber configuration maintained nearly consistent CFE values of 0.55 and 0.56, between axial and lateral loadings respectively, demonstrating isotropic behavior in energy absorption. Conversely, the neat jute fiber configuration improved SEA to 12.14 J/g under axial loading but exhibited significant limitations under lateral loading, with SEA decreasing to 0.69 J/g. Visual examination of crushed samples highlighted local buckling in GF configurations and brittle fracturing in hybrid and neat jute fiber configurations. The scanning electron microscope (SEM) analysis provided detailed insights into the microstructural characteristics and failure mechanisms, highlighting the inter-laminar debonding between the jute and glass fibers in hybrid configuration. By evaluating the combined effects of hybridization and loading conditions, the present study contributes to developing eco-friendly and efficient materials for automotive safety, aligning with industry sustainability goals.

Three-dimensional fiber orientation mapping of the human brain at micrometer resolution.

The accurate measurement of three-dimensional (3D) fiber orientation in the brain is crucial for reconstructing fiber pathways and studying their involvement in neurological diseases. Comprehensive reconstruction of axonal tracts and small fascicles requires high-resolution technology beyond the ability of current in vivo imaging (e.g. diffusion magnetic resonance imaging). Optical imaging methods such as polarization-sensitive optical coherence tomography (PS-OCT) and polarization microscopy can quantify fiber orientation at micrometer resolution but have been limited to two-dimensional in-plane orientation or thin slices, preventing the comprehensive study of connectivity in 3D. In this work we present a novel method to quantify volumetric 3D orientation in full angular space with PS-OCT. We measure the polarization contrasts of the brain sample from two illumination angles of 0 and 15 degrees and apply a computational method that yields the 3D optic axis orientation and true birefringence. We further present 3D fiber orientation maps of entire coronal cerebrum sections and brainstem with 10 μm in-plane resolution, revealing unprecedented details of fiber configurations. We envision that our method will open a promising avenue towards large-scale 3D fiber axis mapping in the human brain as well as other complex fibrous tissues at microscopic level.

T1 relaxation and axon fibre configuration in human white matter.

Understanding the effects of white matter (WM) axon fibre microstructure on T1 relaxation is important for neuroimaging. Here, we have studied the interrelationship between T1 and axon fibre configurations at 3T and 7T. T1 and S0 (=signal intensity at zero TI) were computed from MP2RAGE images acquired with six inversion recovery times. Multishell diffusion MRI images were analysed for fractional anisotropy (FA); MD; V1; the volume fractions for the first (f1), second (f2) and third (f3) fibre configuration; and fibre density cross-section images for the first (fdc1), second (fdc2) and third (fdc3) fibres. T1 values were plotted as a function of FA, f1, f2, f3, fdc1, fdc2 and fdc3 to examine interrelationships between the longitudinal relaxation and the diffusion MRI microstructural measures. T1 values decreased with increasing FA, f1 and f2 in a nonlinear fashion. At low FA values (from 0.2 to 0.4), a steep shortening of T1 was followed by a shallow shortening by 6%-10% at both fields. The steep shortening was associated with decreasing S0 and MD. T1 also decreased with increasing fdc1 values in a nonlinear fashion. Instead, only a small T1 change as a function of either f3 or fdc3 was observed. In WM areas selected by fdc1 only masks, T1 was shorter than in those with fdc2/fdc3. In WM areas with high single fibre populations, as delineated by f1/fdc1 masks, T1 was shorter than in tissue with high complex fibre configurations, as segmented by f2/fdc2 or f3/fdc3 masks. T1 differences between these WM areas are attributable to combined effects by T1 anisotropy and lowered FA. The current data show strong interrelationships between T1, axon fibre configuration and orientation in healthy WM. It is concluded that diffusion MRI microstructural measures are essential in the effort to interpret quantitative T1 images in terms of tissue state in health and disease.

Development of Hollow Fiber Membranes Functionalized with Ionic Liquids for Enhanced CO2 Separation.

The combination of CO2-selective ionic liquids (ILs) with block copolymers, such as Pebax 1657, has demonstrated an enhancement of the gas separation capabilities of polymeric membranes. In the current work, the development of composite membranes by applying a thin, concentrated selective layer made of Pebax/imidazolium-based ionic liquids (ILs) is presented. The objective of the experiments was to determine the optimized IL loading and investigate how the alteration of the anion impacts the properties of the membranes. Two membrane configurations have been studied: coated flat sheet membranes, supported on a porous poly(ether sulfone) (PES) layer, as well as composite hollow fiber membranes, supported on commercial polypropylene (PP) hollow fibers. Coated hollow fiber composites were fabricated using a continuous coating method, offering a straightforward scalability in the manufacturing process. The determined mechanical pressure stability of hollow fiber composites reached up to 5 bar, indicating their potential for various industrial gas separation applications. It was found that the Pebax 1657-based coating containing 40 wt % [C6mim][NTf2] yielded membranes with the best gas separation properties, for both the coated flat sheet and the hollow fiber configurations. The CO2 permeance of hollow fibers reached 23.29 GPU, whereas the CO2/N2 ideal selectivity stood at 8.7, suggesting the necessity of the further enhancement of the coating technique, which can be achieved, for example, through application of multiple coatings. Nonetheless, the superior ideal selectivity of the CO2/CO separation, reaching 12.44, gave a promising outlook for further novel membrane applications, which involve the separation of the aforementioned gases.

Solar-assisted two-stage catalytic membrane reactor for coupling CO2 splitting with methane oxidation reaction

A two-stage catalytic membrane reactor (CMR) that couples CO2 splitting with methane oxidation reactions was constructed based on an oxygen-permeable perovskite asymmetric membrane. The asymmetric membrane comprises a dense SrFe0.9Ta0.1O3-δ (SFT) separation layer and a porous Sr0.9(Fe0.9Ta0.1)0.9Cu0.1O3-δ (SFTC) catalytic layer. In the first stage reactor, a CO2 splitting reaction (CDS: 2CO2 → 2CO + O2) occurs at the SFTC catalytic layer. Subsequently, the O2 product is selectively extracted through the SFT separation layer to the permeated side for the methane combustion reaction (MCR), which provides an extremely low oxygen partial pressure to enhance the oxygen extraction. In the second stage, a Sr0.9(Fe0.9Ta0.1)0.9Ni0.1O3-δ (SFTN) catalyst is employed to reform the products derived from MCR. The two-stage CMR design results in a remarkable 35.4% CO2 conversion for CDS at 900 °C. The two-stage CMR was extended to a hollow fiber configuration combining with solar irradiation. The solar-assisted two-stage CMR can operate stably for over 50 h with a high hydrogen yield of 18.1 mL min−1 cm−2. These results provide a novel strategy for reducing CO2 emissions, suggesting potential avenues for the design of the high-performance CMRs and catalysts based on perovskite oxides in the future.

Exploring the influence of fiber orientation on the mechanical characteristics of polymer composites reinforced with banana and corn fibers

In recent decades, the utilization of polymer composites reinforced with natural fibers has seen a significant increase due to their durability, eco-friendliness, and favorable composite properties. This study investigates the influence of unidirectional and cross-directional fiber orientation on the mechanical properties of polymer composites reinforced with banana and corn fibers, fabricated through a hand-lay-up process. The research assesses the impact of fiber orientation on various mechanical properties, including density, porosity, tensile strength, flexural strength, and impact strength. The findings reveal that the higher densities of banana and corn fibers, in comparison to the epoxy matrix, contribute to increased overall weight density in the composites, with cross-directional fiber orientation leading to higher porosity. Moreover, cross-directional reinforcement orientation enhances tensile strength, resulting in a robust bond with the matrix. Composites with cross-directional corn fibers exhibit the highest ultimate tensile strength of 49.57 MPa, marking a significant improvement over other fiber configurations. Notably, unidirectional corn fibers outperform in flexural strength of 14.07 MPa, surpassing banana–corn, and banana–banana configurations by 268.32% and 32.73%, respectively, and cross-directional banana–corn hybrid composites exhibit superior impact strength measuring 5.31 kJ/m2 due to their ability to resist crack propagation. Whereas scanning electron microscopy micrographs of fractured samples reveal debonding, fiber pullout, and fiber scissoring as the root causes of sample failure under tensile load These insights provide valuable guidance for the design and application of composite materials.

Exciting Surface Plasmon Resonances on Gold Thin Film‐Coated Optical Fibers Through Nanoparticle Light Scattering

AbstractSurface plasmon resonance (SPR) conventionally occurs at the interface of a thin metallic film and an external dielectric medium in fiber optics through core‐guided light. However, this work introduces theoretical and experimental evidence suggesting that the SPR in optical fibers can also be induced through light scattering from Au nanoparticles (NPs) on the thin metallic film, defined as nanoparticle‐induced SPR (NPI‐SPR). This method adheres to phase‐matching conditions between SPR dispersion curves and the wave vectors of scattered light from Au NPs. Experimentally, these conditions are met on an etched optical fiber, enabling direct interaction between light and immobilized Au NPs. Compared to SPR, NPI‐SPR exhibits stronger field intensity in the external region and wavelength tuning capabilities (750 to 1250 nm) by varying Au NP diameters (20 to 90 nm). NPI‐SPR demonstrates refractive index sensitivities of 4000 to 4416 nm per refractive index unit, nearly double those of typical SPR using the same optical fiber configuration sans Au NPs. Additionally, NPI‐SPR fiber configuration has demonstrated its applicability for developing biosensors, achieving a remarkable limit of detection of 0.004 nm for thrombin protein evaluation, a twenty‐fold enhancement compared to typical SPR. These findings underscore the intrinsic advantages of NPI‐SPR for sensing.

Octave‐Spanning Second‐Harmonic Generation in Dispersion‐Engineered Lithium Niobate‐on‐Insulator Microwaveguide

Broadband lasers, e.g., ultrashort lasers, optical supercontinuum, and frequency combs, are revolutionary coherent light sources, which enable a plethora of state‐of‐the‐art applications ranging from precision spectroscopy to optical clocks. However, the spectral broadening of these coherent light sources mainly relies on the third‐order nonlinearity () and is difficult to extend to the visible or shorter wavelength regime. Second‐order nonlinearity (), which is orders of magnitude larger than , becomes a powerful tool for the frequency translation if its broadband operation is well addressed. Herein, an octave‐spanning second‐harmonic generation scheme is experimentally demonstrated beyond an extremely large frequency range of 135 THz and high conversion efficiency of 1% for sub‐100 pJ for the near‐infrared picosecond supercontinuum in a fiber–waveguide–fiber configuration. The process relies on ultrabroadband birefringence phase matching in the dispersion‐engineered lithium niobate‐on‐insulator ridge microwaveguide. The mode area of microwaveguide well matches with single‐mode lens fiber, reducing coupling loss and ensuring easy packaging. The method provides a new approach to span the wavelength range of coherent light with ‐based wavelength translation for supercontinuum or frequency combs into the visible regime. The result would find applications in spectroscopy, astrophysics, atomic optics, optical synthesis, etc.

Development of Photonic Smart Veil for Structural Health Monitoring

The use of fiber optics as structural health monitoring (SHM) systems is now widespread. This technology is ideal for the creation of monitoring algorithms thanks to the creation of individual Bragg grating sensors (FBGS) or arrays of sensors, the small size, durability, real-time monitoring capabilities, and the ability to place these elements within composite structures. One of the issues in using FBG sensors is the placement of these local transducers at the point where measurement is to be made, during the composite component creation process. Positioning a sensor array along a complex path in the lamination sequence and ensuring that the position of the sensors is maintained during the autoclave curing process is a decisive challenge to enable this technology to spread rapidly in the market. Starting with the configuration of the Quick Pack, a thin membrane that incorporates optical fiber, methods of manufacturing the component were improved by minimizing its size to reduce its invasiveness. New materials to incorporate the optical fiber and different configurations to reduce its stiffness were considered. Configurations with different degrees of polymerization of the constituent materials were studied to improve the adhesion of the component to the composite structure. To validate the performance improvement, specimens were created in order to perform peel tests (ASTM D 3167-10). The results demonstrate the improvement in adhesion and the advantage of including the partially cured element in the lamination sequence. Further prototyping identified the minimum degree of polymerization required to hold the optical fiber in place. This new transducer, Photonic Smart Veil, allows FBG sensors to be properly inserted in the desired positions and locked in place during the production of composite components, improving their performance.

790–1000 nm continuously-tunable fiber-based femtosecond laser source

We report a 790–1000 nm tunable femtosecond laser source by second harmonic generation (SHG) of a 1580–2000 nm soliton self-frequency shift (SSFS) fiber laser. The SSFS fiber laser with an all polarization-maintaining fiber configuration consists of passively mode-locked figure-9 Er-doped fiber oscillator, two-stage fiber amplifiers and a nonlinear fiber, delivering femtosecond Raman solitons in a tunable range of 1580 to 2016 nm. The tunable Raman solitons are further injected into a specifically-designed chirped periodically-poled lithium niobite (CPPLN) crystal for efficient SHG, and therefore femtosecond pulses with wide wavelength tuning from 790 to 1000 nm are obtained. The shortest pulse duration is < 100 fs at 890 nm, and the average power is 7.55 mW with a repetition rate of 44.9 MHz. This is, to the best of our knowledge, the first demonstration of a < 1000 nm broadband tunable fiber-based femtosecond source almost covering the whole short-wavelength near-infrared spectrum, which may have important applications in the nonlinear microscopy, biomedical imaging, and material processing.

Single‐crystalline indium selenide fibers by laser‐induced recrystallization and their tunable whispering‐gallery‐mode lasing by pressure‐modulating

AbstractIndium selenide (InSe) crystal, as an emerging Van der Waals semiconductor, showed great potential in optical and optoelectronic devices due to its remarkable electron mobility, flexible direct bandgap, and photoresponsivity. Especially, the bulk single‐crystalline InSe shows superplastic deformability with the aid of the interlayer gliding and cross‐layer dislocation slip. The extraordinary mechanical behavior brings significant opportunities and possibilities to pressure‐modulated optical devices, which, however, have not been explored sufficiently. Additionally, InSe crystals are challenged in the rapid large‐scale preparation and reproduction due to limitations, such as phase heterogeneity, dissociation risks, and chemical instability. Herein, we proposed a fiber drawing technique to create single‐crystalline InSe by the molten core drawing method combined with CO2 laser‐induced recrystallization. The fabricated InSe fiber, spanning several meters in length, shows a uniform and directional single‐crystalline InSe core encased within a 450 µm thick protective borosilicate glass cladding. The inherent core‐cladding configuration of the InSe fibers not only provides robust protection to the InSe crystals but also seamlessly creates a whispering‐gallery‐mode microcavity. Utilizing a 532 nm nanosecond pulsed laser as a pump, a tunable lasing from 1076.2 to 1111.8 nm was achieved, dictated by the controlled pressure within the InSe fiber. We present a simple and effective method for single‐crystalline InSe fabrication and first achieve a pressure‐modulated laser in a near‐infrared band based on InSe fiber, heralding an advancement for the scalable, efficient generation of tunable lasers.

Spectral Characteristics and Displacement Sensing of U-Shaped Single-Mode-Multimode-Single-Mode Fiber Structure.

The U-shaped fiber configuration represents the elementary form of micro-displacement sensing, characterized by its exceptional freedom and flexibility. The study proposes the U-shaped bent single-mode-multimode-single-mode (SMS) fiber structure that integrates the multimode interference (MMI) effect for enhanced mode dispersion and the Mach-Zönder interference (MZI) effect for spectral sensitivity improvement. The transmission spectral properties of the U-shaped SMS fiber structure with a bent radius over 1 cm are experimentally measured as the change in displacement varied within the range of 5 mm in this work. As the radius decreases, the spectrum shows redshift, which is related to the central wavelength of the peak or dips-a smaller wavelength results in a stronger redshift for the same displacement change. The average sensitivity of micro-displacement measurement within a range of 5 mm is 5.41 pm/μm, and the linearity is 99.62%. The maximum sensitivity of U-shaped SMS fiber structure is 34.46 pm/μm, with the minimum displacement change of approximately 5.804 nm. The transmission spectral properties of the U-shaped SMS fiber structure within the ranges of 50 μm, 500 μm, and 5 mm are experimentally measured in this work. This experiment observed a relatively uniform spectral drift pattern in a large range of micro-displacement sensing. The measurement range is limited by the limited spectral range of the light source and the discontinuous variation in the effective refractive index. This provides an experimental reference for further understanding the characteristics of U-shaped fiber structures and applying its application in micro-displacement sensing.