Fiber Coatings Research Articles

Living Dual Heat- and pH-Responsive Textiles.

Smart textiles that integrate multiple environmental sensing capabilities are an emerging frontier in wearable technology. In this study, we developed dual pH- and temperature-responsive textiles by combining engineered bacterial systems with bacterially derived proteins. For temperature sensing, we characterized the properties of a heat sensitive promoter, Phs, in Escherichia coli (E. coli) using enhanced green fluorescent protein as a reporter. Our findings demonstrate that the Phs promoter drives elevated gene expression at temperatures between 37 and 43 °C, maintaining sustained activity for several hours. Moreover, we found that short heat shocks can significantly boost expression levels of the Phs promoter. We successfully integrated E. coli expressing Phs-EGFP cells onto textiles and confirmed their ability to retain heat-responsive behavior after integration. To achieve pH responsiveness, we utilized curli fibers, genetically engineered to incorporate a pH-sensitive fluorescent protein, pHuji. pH-sensing curli fibers are bacterial proteins that have a proven track record of creating stable bioresponsive textile coatings. By embedding Phs-EGFP-expressing bacteria within curli fiber coatings, we created a dual-responsive textile capable of differentiating between acidic and alkaline environments while simultaneously responding to thermal stimuli. These multifunctional textiles exhibited dual environmental response and sensing capabilities. This work establishes a proof-of-concept for creating smart living textiles with modular functionalities, paving the way toward advanced bioresponsive materials.

Volatile Profile of Bee Pollens: Optimization of Sampling Conditions for Aroma Analysis, Identification of Potential Floral Markers, and Establishment of the Flavor Wheel.

The volatile profile of bee pollen samples from Central and Eastern Europe was investigated by headspace solid phase microextraction (HS-SPME) combined with gas chromatography-mass spectrometry-olfactometry (GC-MS-O). Sampling conditions were optimized for the extraction of volatiles. Pollen odorants were extracted with six different fiber coatings, five various extraction times, three diverse extraction temperatures and three differing desorption times. The most effective combination was the application of divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber coating used at 60°C for 30 min for extraction and 1 min for desorption. The optimized method was applied to investigate the volatile profile of 14 pollen samples (three rapeseed, musk thistle, rock-rose, traveler's joy, dropwort, honey locust, sunflower, red poppy, phacelia, sweet cherry, wild blackberry, and dandelion). The volatile profiles of bee pollens were different and were crucially depended on botanical origin. The aroma activity of the samples was generated by 31.0%-48.3% of total volatiles. The number of the identified odorants were between 75 and 101 in the pollen samples by GC-MS, of which 26-42 were aroma-active. The volatile organic compounds (VOCs) were classified into 13 different chemical classes. In most pollen, fatty acids were the predominant volatiles (14.87%-50.58%), while in some samples esters were the most abundant odorants (4.09%-45.46%). Panelists confirmed the presence of six main sensory characteristics described as "green/sour", "fruity", "spicy/herbal", "earthy/mushroom", "sweet/baked/caramel/honey", and "floral" compounds. These results establish the flavor wheel suitable for the comprehensive sensory description of pollen pellets from individual plant species. All samples contained characteristic odorants that may help in their botanical identification.

Recent trends and advancements in the utilization of green composites and polymeric nanocarriers for enhancing food quality and sustainable processing

Abstract Consumers now have access to synthetic natural organic nanofoods with tailored properties. These nanofoods use organic or inorganic nanostructured ingredients to enhance bioavailability, making them more effective than traditional supplements. Common materials include metals like iron, silver, titanium dioxide, magnesium, calcium, selenium, and silicates. Modifying the surface of these nanoparticles can provide unique benefits such as improved preservation, mechanical strength, moisture control, and flavor enhancement. Nanocarriers, such as polymeric, lipid, and dendrimer-based carriers, are used in food production. Common polymers include polyglycolic acid, poly (lactic acid), chitosan, and sodium alginate. Lipid carriers have a hydrophobic outer layer and a hydrophilic core, while dendrimer carriers are made from materials like polyethylene glycol and polyamidoamine. These nanocarriers can encapsulate up to 99% of active ingredients, ensuring precise delivery and stability. The nanocarriers in commercial foods are emulsions, inorganic coatings, and fiber coatings. For instance, cucumbers coated with nano emulsions show up to 99% antimicrobial effectiveness. Inorganic coatings, such as potassium sorbate, calcium caseinate, and titanium dioxide, significantly extend the shelf life of packaged foods. Lipid and protein-encapsulated nanosystems offer complete gas barrier protection. This review highlights the exclusive use of nanoparticles in food processing and packaging to enhance quality, safety, and shelf life.

A High-Sensitivity Fiber Optic Soil Moisture Sensor Based on D-Shaped Fiber and Tin Oxide Thin Film Coatings.

We present a high-sensitivity fiber optic soil moisture sensor based on side-polished multimode fibers and lossy mode resonance (LMR). The multimode fibers (MMFs), after side-polishing to form a D-shaped structure, are coated with a single-layer SnO2 thin film by electron beam evaporation with ion-assisted deposition technology. The LMR effect can be obtained when the refractive index of the thin film is positive and greater than its extinction coefficient and the real part of the external medium permittivity. The D-shaped fiber optic soil moisture sensor was placed in soil, allowing moisture to penetrate into the thin film microstructure, and it observed the resonance wavelength shift in LMR spectra to measure the relative humidity change in soil. Meanwhile, an Arduino electronic soil moisture sensing module was used as the experimental control group, with soil relative humidity ranging from 10%RH to 90%RH. We found that the D-shaped fiber with a residual thickness of 93 μm and SnO2 thin film thickness of 450 nm had a maximum sensitivity of 2.29 nm/%RH, with relative humidity varying from 10%RH to 90%RH. The D-shaped fiber also demonstrates a fast response time and good reproducibility.

Electrodeposition of Zn-Al-Layered Double Hydroxides With Interlayer Modification by Ibuprofen as Fiber Coating for Solid Phase Microextraction of Nonsteroidal Anti-Inflammatory Drugs.

In this study, in situ electrodeposition of Zn─Al-layered double hydroxides (Zn─Al-LDHs) on the surface of pencil graphite substrate were practiced with interlayer modification by ibuprofen. The prepared composite increases the efficiency of the proposed method by increasing the level of interaction between the sorbent and the selected analytes including acetylsalicylic acid and naproxen (NAP) in real sample. Eventually, the extracted target analytes were injected into high-performance liquid chromatography ultraviolet (HPLC-UV) for their measurement. The experimental design including PBD and BBD was implemented to obtain the maximize efficiency and optimal condition for extraction of the target analytes. Therefore, in optimal conditions, limits of detection of 0.33-0.64µgL-1, linear dynamic range (LDR) of 1-100µgL-1 (with r2>0.9934), and limits of quantification (LOQs) of 1.1-2.1µgL-1 were obtained for target analytes by SPME-HPLC-UV. The intra-day relative standard deviation (RSD%) were found to range in 3.90%-5.30% (4.90%-6.80%) at concentration of 5-50µgL-1 (2-10µgL-1). According to obtained result, the relative recovery was calculated between 90% and 109%. Therefore, the obtained results showed that the selected method has a suitable performance for the preconcentration and extraction of acetylsalicylic acid and NAP in biological samples.

High-temperature resistant boron nitride-based coatings for specialty silica optical fibers

h-BN is well known for its thermal stability. h-BN coated silica optical fibers were manufactured. The coating solution is compatible with optical fiber drawing process, which allows the preparation of tens of meter of h-BN coated fibers. In addition, it is possible to use this coating material for the preparation of short length fiber samples in a post-production approach. Bentonite acts as a binder and allows the adhesion of h-BN to the silica optical fiber. The thermal stability of this protected optical fiber has been demonstrated over a short period of time (several hours) up to 900 °C and over a long period of time (1500 h) up to 800 °C in air. Moreover, the coated optical fiber can resist up to 1000 °C in neutral atmosphere (tested over 6 h).

Dopant, coating, and grating effects in silica optical fibers under extreme neutron irradiation

Radiation effects on fiber Bragg gratings (FBGs) have been studied but data gaps related to the effects of displacement damage resulting from high fast neutron fluence remain. In this work, Type-I and Type-II FBGs inscribed in optical fibers with various core dopants (Ge and F) and fiber coatings (acrylate, polyimide) were monitored in situ during 75 days of neutron irradiation to a peak fast (>0.1 MeV) neutron fluence of 3×1021 nfast/cm2. The reflected intensity of the Type-I FBGs inscribed in a Ge-doped core fiber decreased by >30 dB within 7 h of irradiation (1019 nfast/cm2), whereas Type-II FBGs inscribed in a pure silica core fiber eventually approached >40 dB attenuation after accumulating a fast neutron fluence on the order of 1020 nfast/cm2. Type-II FBGs inscribed in F-doped core fiber improved stability: the attenuation approached an equilibrium value in the range of 10 to 20 dB.

Characterization and comparative analysis of sericin protein 150 in Bombyx mori

Lepidopteran silk is a complex mixture of proteins, consisting mainly of fibroins and sericins. Sericins are a small family of highly divergent proteins that serve as adhesives and coatings for silk fibers. So far, five genes encoding sericin proteins have been identified in Bombyx mori. Having previously identified sericin protein 150 (SP150) as a major sericin-like protein in the cocoons of the pyralid moths Galleria mellonella and Ephestia kuehniella, we describe the identification of its homolog in B. mori. Our refined gene model shows that it consists of four exons and a long open reading frame with a conserved motif, CXCXCX, at the C-terminus, reminiscent of the structure observed in a class of mucin proteins. Notably, despite a similar expression pattern, both mRNA and protein levels of B. mori SP150 were significantly lower than those of its pyralid counterpart. We also discuss the synteny of homologous genes on corresponding chromosomes in different moth species and the possible phylogenetic relationships between SP150 and certain mucin-like proteins. Our results improve our understanding of silk structure and the evolutionary relationships between adhesion proteins in the silk of different lepidopteran species.

Cellulose Acetate and Polycaprolactone Fibre Coatings on Medical-Grade Metal Substrates for Controlled Drug Release.

This study explores a method that has the potential to be cost effective in inhibiting biofilm formation on metallic prostheses, thereby preventing rejection or the requirement for replacement. A cost-effective metal alloy used in biomedical implants was chosen as the substrate, and ibuprofen (Ibu), a well-known anti-inflammatory drug, was selected for drug release tests for its widespread availability and accessibility. Multilayer coatings consisting of cellulose acetate (CA), polycaprolactone (PCL), and chitosan (CHI), with or without ibuprofen (Ibu) content, were applied onto medical-grade stainless steel (SS-316 type) through electrospinning, electrospray, or blow spinning. The adhesion of the CA, PCL, and layered CA/PCL membranes, with thicknesses ranging from 20 to 100 μm, to SS substrates varied between 0.15 N and 0.22 N without CHI, which increased to 0.21 and 0.74 N, respectively, when a CHI interlayer was introduced by electrospraying between the SS and the coatings. Although drug release in a simulated body fluid (SBF) medium is predominantly governed by diffusion-driven mechanisms in all single- and multilayer coatings, a delayed release was noted in CA coatings containing Ibu when overlaid with a PCL coating produced by blow spinning. This suggests avenues for further investigations into combinations of multilayer coatings, both with and without drug-imbued layers.

Engineering of dual recognition functional aptamer-molecularly imprinted polymeric solid-phase microextraction for detecting of 17β-estradiol in meat samples

In this study, an enhanced selective recognition strategy was employed to construct a novel solid-phase microextraction fiber coating for the detection of 17β-estradiol, characterized by the combination of aptamer biorecognition and molecularly imprinted polymer recognition. Benefiting from the combination of molecularly imprinted and aptamer, aptamer-molecularly imprinted (Apt-MIP) fiber coating had synergistic recognition effect. The effects of pH, ion concentration, extraction time, desorption time and desorption solvent on the adsorption capacity of Apt-MIP were investigated. The adsorption of 17β-estradiol on Apt-MIP followed pseudo-second order kinetic model, and the Freundlich isotherm. The process was exothermic and thermodynamically spontaneous. Compared with polymers that only rely on imprinted recognition, non-imprinted recognition or aptamer affinity, Apt-MIP had the best recognition performance, which was 1.30–2.20 times that of these three materials. Furthermore, the adsorption capacity of Apt-MIP for 17β-estradiol was 885.36–1487.52 times than that of polyacrylate and polydimethylsiloxane/divinylbenzone commercial fiber coatings. Apt-MIP fiber coating had good stability and could be reused for more than 15 times. Apt-MIP solid-phase microextraction coupled with high-performance liquid chromatography was successfully applied to the determination of 17β-estradiol in pork, chicken, fish and shrimp samples, with satisfactory recoveries of 79.61 %–105.70 % and low limits of detection (0.03 μg/kg). This work provides new perspectives and strategies for sample pretreatment techniques based on molecular imprinting technology and improves analytical performance.

Evaluation of the vacuum effect on headspace solid-phase microextraction of volatile organic compounds from aqueous samples using finite element analysis modeling

Headspace solid-phase microextraction (HSSPME) of volatile organic compounds (VOCs) from aqueous samples under vacuum conditions (Vac-HSSPME) allows increasing extraction rates and decreasing detection limits compared to HSSPME under atmospheric pressure. The positive effect of the vacuum on HSSPME of an analyte can be quickly estimated using its Henry's law constant (HLC). According to the two-layer model of evaporation, substantial positive effect of the vacuum can be expected for analytes with HLC lower than 1.6·10−4 atm m3 mol−1 (0.0065 at 25 °C), but the model does not consider possible effects of other important extraction parameters. This research was aimed at the evaluation of the possible effect of vacuum on the equilibration time and extracted amounts of analytes with various HLC and fiber coating-headspace distribution constants (Kfh) using the computational model recently developed in COMSOL Multiphysics® software. It has been proven that HSSPME under vacuum provides faster equilibration of VOCs with all studied Kfh and HLC. The largest vacuum effect on the extracted analyte amount was 3.9–4.0 times at logKfh = 6 and HLC = 10−6–10−3. The substantial (≥1.5 times) vacuum impact should not be expected for analytes with logKfh < 5 for 15-min extraction and logKfh < 5.5 for 30-min extraction. The vacuum impact should be more pronounced when using fiber coatings with a stronger affinity to analytes. The obtained results will be useful for the development of new methods based on Vac-HSSPME and evaluation whether HSSPME is reasonable to conduct under vacuum conditions for faster equilibration and/or lower detection limits.

Analysis and Stability Study of Isoeugenol in Aquaculture Products by Headspace Solid-Phase Microextraction Coupled to Gas Chromatography-Mass Spectrometry.

Headspace solid-phase microextraction coupled to gas chromatography-mass spectrometry (HS-SPME-GC-MS) offers an alternative analysis method for isoeugenol (an active ingredient in fish sedatives) that avoids the use of organic solvents, simplifies sample preparation, and can be fully automated. This work focuses on developing and evaluating an HS-SPME-GC-MS method for isoeugenol in aquaculture samples and testing the stability of isoeugenol itself. Because of isoeugenol's relatively low volatility, more polar SPME fiber coatings (polyacrylate and polydimethylsiloxane/divinylbenzene) had better performance and the headspace extractions took over 30 min to reach equilibrium. Additionally, it was found that isoeugenol was relatively unstable compared to a deuterated standard (d3-eugenol) in the presence of water. To address this, after the fish samples were homogenized with water, they were heated at 50 °C for 1 h prior to analysis for equilibration. By using the method developed in this work, isoeugenol's detection limits in multiple aquaculture matrices (shrimp, tilapia, and salmon) were in the low ng/g range (<15 ng/g), well below the target testing level (200 ng/g). Additionally, by adding d3-eugenol as an internal standard, excellent linearity (R2 > 0.98), accuracy (97-99% recoveries), and precision (5-13% RSDs) were all achieved.

Soluble Fluorinated Cardo Copolyimide as an Effective Additive to Photopolymerizable Compositions Based on Di(meth)acrylates: Application for Highly Thermostable Primary Protective Coating of Silica Optical Fiber.

The development of photocurable compositions is in high demand for the manufacture of functional materials for electronics, optics, medicine, energy, etc. The properties of the final photo-cured material are primarily determined by the initial mixture, which needs to be tuned for each application. In this study we propose to use simple systems based on di(meth)acrylate, polyimide and photoinitiator for the preparation of new photo-curable compositions. It was established that a fluorinated cardo copolyimide (FCPI) based on 2,2-bis-(3,4-dicarboxydiphenyl)hexafluoropropane dianhydride, 9,9-bis-(4-aminophenyl)fluorene and 2,2-bis-(4-aminophenyl)hexafluoropropane (1.00:0.75:0.25 mol) has excellent solubility in di(met)acrylates. This made it possible to prepare solutions of FCPI in such monomers, to study the effect of FCPI on the kinetics of their photopolymerization in situ and the properties of the resulting polymers. According to the obtained data, the solutions of FCPI (23 wt.%) in 1,4-butanediol diacrylate (BDDA) and FCPI (15 wt.%) in tetraethylene glycol diacrylate were tested for the formation of the primary protective coatings of the silica optical fibers. It was found that the new coating of poly(BDDA-FCPI23%) can withstand prolonged annealing at 200 °C (72 h), which is comparable or superior to the known most thermally stable photo-curable coatings. The proposed approach can be applied to obtain other functional materials.

Thiocarbamide conversion-based nitrogen-rich covalent organic framework coatings for electro-enhanced solid-phase microextraction of bisphenols

Design and preparation of fiber coatings with excellent electrochemical performance and high polarity is significant for efficient extraction of polar targets in electro-enhanced solid-phase microextraction (EE-SPME). In this work, a combination strategy for structure regulation of covalent organic framework (COF) was proposed to fabricate a nitrogen-rich thiocarbamide linked COF coating (Thiocarbamide-TZ-DHTP) via molecular design and post-synthetic thiocarbamide conversion. The prepared COF coating possesses a large number of O, N, and S functional groups, which not only endow the coating with higher polarity but also significantly enhance its electrochemical performance. The COF coating was used for EE-SPME of polar bisphenols (BPs), demonstrating excellent enrichment efficiency and durability. Subsequently, coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS), a sensitive method was developed for determination of trace BPs. The established method possess wide linear ranges (2.0–800.0 ng L−1), good correlation coefficients (0.9985–0.9994) and low detection limits (0.1–2.0 ng L−1). Moreover, the established method had been successfully applied to detection of trace BPs in tea beverage with satisfactory recoveries (81.6 % to 118.6 %). This research provides a feasible pathway for preparing COF coating with excellent electrochemical performance and high polarity for EE-SPME.

Directed Assembly of Elastic Fibers via Coacervate Droplet Deposition on Electrospun Templates.

Elastic fibers provide critical elasticity to the arteries, lungs, and other organs. Elastic fiber assembly is a process where soluble tropoelastin is coacervated into liquid droplets, cross-linked, and deposited onto and into microfibrils. While much progress has been made in understanding the biology of this process, questions remain regarding the timing of interactions during assembly. Furthermore, it is unclear to what extent fibrous templates are needed to guide coacervate droplets into the correct architecture. The organization and shaping of coacervate droplets onto a fiber template have never been previously modeled or employed as a strategy for shaping elastin fiber materials. Using an in vitro system consisting of elastin-like polypeptides (ELPs), genipin cross-linker, electrospun polylactic-co-glycolic acid (PLGA) fibers, and tannic acid surface coatings for fibers, we explored ELP coacervation, cross-linking, and deposition onto fiber templates. We demonstrate that integration of coacervate droplets into a fibrous template is primarily influenced by two factors: (1) the balance of coacervation and cross-linking and (2) the surface energy of the fiber templates. The success of this integration affects the mechanical properties of the final fiber network. Our resulting membrane materials exhibit highly tunable morphologies and a range of elastic moduli (0.8-1.6 MPa) comparable to native elastic fibers.

MOF-derived porous carbon microspheres Ni@C-acid as solid-phase microextraction coating for extraction of polycyclic aromatic hydrocarbons from tea infusions

The improvement of the stability and adsorption properties of materials on targets in sample pre-treatment has long been an objective. Extensive efforts have been made to achieve this goal. In this work, metal-organic framework Ni-MOF precursors were first synthesized by solvothermal method using polyvinylpyrrolidone (PVP) as an ideal templating agent, stabiliser and nanoparticle dispersant. After carbonization and acid washing, the nanoporous carbon microspheres material (Ni@C-acid) was obtained. Compared with the material without acid treatment (Ni@C), the specific surface area, pore volume, adsorption performance of Ni@C-acid were increased. Thanks to its excellent characteristics (high stability, abundant benzene rings), Ni@C-acid was used as fiber coatings in headspace solid-phase microextraction (HS-SPME) technology for extraction and preconcentration of polycyclic aromatic hydrocarbons (PAHs) prior to gas chromatography-flame ionization detector (GC-FID) analysis. The experimental parameters of extraction temperature, extraction time, agitation speed, desorption temperature, desorption time and sodium chloride (NaCl) concentration were studied. Under optimal experimental conditions, the wide linear range (0.01-30 ng mL−1), the good correlation coefficient (0.9916-0.9984), the low detection limit (0.003-0.011 ng mL−1), and the high enrichment factor (5273-13793) were obtained. The established method was successfully used for the detection of trace PAHs in actual tea infusions samples and satisfied recoveries ranging from 80.94-118.62 % were achieved. The present work provides a simple method for the preparation of highly stable and adsorbable porous carbon microsphere materials with potential applications in the extraction of environmental pollutants.

Effective Utilization of Local Fiber Coating Materials for Enhanced Sensitivity in Temperature and Humidity Sensing Applications

Effective Utilization of Local Fiber Coating Materials for Enhanced Sensitivity in Temperature and Humidity Sensing Applications

Screening of volatiles from explosive initiators and plastic-bonded explosives (PBX) using headspace solid-phase microextraction coupled with gas chromatography - mass spectrometry (SPME/GC-MS).

The detection of explosives and explosive devices based on the volatile compounds they emit is a long-standing tool for law enforcement and physical security. Toward that end, solid-phase microextraction (SPME) combined with gas chromatography-mass spectrometry (GC-MS) has become a crucial analytical tool for the identification of volatiles emitted by explosives. Previous SPME studies have identified many volatile compounds emitted by common explosive formulations that serve as the main charge in explosive devices. However, limited research has been conducted on initiators like fuses, detonating cords, and boosters. In this study, a variety of SPME fiber coatings (i.e., polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB), divinylbenzene/carboxin/polydimethylsiloxane (DVB/CAR/PDMS), and carboxin/polydimethylsiloxane (CAR/PDMS)) were employed for the extraction and analysis of volatiles from Composition C-4 (cyclohexanone, 2-ethyl-1-hexanol, and 2,3-dimethyl-2,3-dinitrobutane (DMNB)) and Red Dot double-base smokeless powder (nitroglycerine, phenylamine). The results revealed that a PDMS/DVB fiber was optimal. Then, an assortment of explosive items (i.e., detonation cord, safety fuse, slip-on booster, and shape charge) were analyzed with a PDMS/DVB fiber. A variety of volatile compounds were identified, including plasticizers (tributyl acetyl citrate, N-butylbenzenesulfonamide), taggants (DMNB), and degradation products (2-ethyl-1-hexanol).

Facile roll-to-roll production of nanoporous fiber coatings for advanced wound care sutures.

Theranostic sutures are derived from innovative ideas to enhance wound healing results by adding wound diagnostics and therapeutics to typical sutures by functionalizing them with additional materials. Here, we present a new direct electrospinning method for the fast, continuous, inexpensive, and high-throughput production of versatile nanofibrous-coated suture threads, with precise control over various essential microstructural and physical characteristics. The thickness of the coating layer and the alignment of nanofibers with the thread's direction can be adjusted by the user by varying the spooling speed and the displacement between the spinneret needle and thread. To show the flexibility of our method for a range of different materials selected, gelatin, polycaprolactone, silk fibroin, and PEDOT:PSS (poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate)) were the resultant nanofibers characterized by scanning electron microscopy (SEM) imaging and conductivity tests. In a series of in vitro and ex vivo tests (pig skin), sutures were successfully tested for their flexibility and mechanical properties when used as weaving and knotting sutures, and their biocompatibility with a keratinocyte cell line. For temperature-based drug-releasing tests, two fluorescent molecules as drug models with high and low molecular weight, namely fluorescein isothiocyanate-dextran (20 kDa) and rhodamine B (470 Da), were used, and their steady release with incremental increase of temperature to 37 °C over 120 min was seen, which is appropriate for bacterial treatment drugs. Given the advantages of the presented technique, it seems to have promising potential to be used in future medical applications for wound closure and bacterial infection treatment via a temperature-triggered drug release strategy.

Properties and applications of keratin from the waste of animal-farming (review article)

The study aims to provide a modern overview of the properties of keratin-containing raw materials from animal waste among the research scientists over the past decades and to show the important role of keratin in science. This review examines the composition and types of keratin, the scope of application, the functions of keratin, distribution in animal husbandry and fish farming, as well as in mammals. It is important to note that keratin is widely used in biomedicine, tissue engineering, bioplastics, textiles, biocomposites in construction and building materials. This article reveals the physical and chemical properties and advantages of keratin, such as biodegradability, mechanical abilities, resistance to temperature conditions and thermal conductivity. Keratin can be synthesized from different raw materials, such as wool, hair, bird feathers, using different methods. The extraction method can be of several types: oxidative and reducing, as well as extraction by steam explosion. Extracted keratin has generated increased interest for its study and research for medical purposes, or rather the first innovative discoveries were made among cosmetics, coatings for medicines and fibers. Keratin extracted from animal waste represents a promising active biomolecule for biological and biomaterial applications. The exceptional properties that keratin transmits by virtue of its nature open up the possibility of replacing synthetic materials with biomaterials more compatible with humans and biodegradable, which can improve the overall economy of the closed cycle of agro-industrial complexes.