Fiber Surface Plasmon Resonance Research Articles

Temperature and RI sensing based on micro-structured optical fiber surface plasmon resonance

In this paper, we propose a surface plasmon resonance sensor based on micro-structured optical fiber capable of simultaneous sensing of a liquid refractive index and temperature. The fiber structure comprises four large air holes, with side polishing and rectangular groove processing on one side without air holes. Ag film and α-Fe2O3 film are coated inside the rectangular groove for refractive index sensing. Au film is coated on the inner walls of the two side air holes and filled with polydimethylsiloxane (PDMS) for temperature sensing. The results show that the sensor can achieve sensing of two parameters in two polarization directions. With a refractive index ranging from 1.35 to 1.42 and temperature ranging from 10°C to 100°C, the maximum refractive index sensitivity reaches 28225.7 nm/RIU and the maximum temperature sensitivity reaches −3.64nm/∘C. The sensor features simple structure, easy implementation, and high sensitivity, making it applicable in fields such as biosensing, chemical sensing, and environmental monitoring.

Optical Fiber Surface Plasmon Resonance Torsion Sensor Based on Threaded Structure

Optical Fiber Surface Plasmon Resonance Torsion Sensor Based on Threaded Structure

High sensitivity fiber optic SPR sensor for selenium ion concentration detection

Balance of selenium content is of great significance to human health, and there is a need for rapid and sensitive detection of selenium ion concentrations in the human body and food. This article proposes a highly sensitive fiber surface plasmon resonance (SPR) sensor for selenium ion concentration detection. By fabricating a fiber U-shaped ring composite structure and modifying Cu3VSe4 material, the sensitivity of the fiber SPR sensor is improved to 6826.82 nm/RIU. Using 2,4-diamino-6phenyl-1,3,5-triazine to modify the surface of the sensor to achieve specific detection of selenium ion concentration. The experiment results indicate that the detection sensitivity of the sensor is 1.858 nm/(lg(pg/ml)) with range of 100 pg/ml to 1 μg/ml, and the LOD is 124.06 pg/ml. The highly sensitive SPR sensor proposed in this article, without labeling, can achieve high sensitivity and rapid detection of selenium ions, providing a new approach for trace element content detection.

Double-formant PCF-SPR refractive index sensor with ultra-high double-peak-shift sensitivity and a wide detection range

A dual-resonance-peak photonic crystal fiber–surface plasmon resonance (PCF-SPR) refractive index (RI) sensor is designed for different wavelength ranges. The first resonance peak of the sensor is distributed in the wavelength range of 700–2350 nm, while the second peak is distributed in the range of 2350–5550 nm. In addition to detecting analytes using the full spectrum of constraint losses (CLs), it is also possible to use a single resonance peak to achieve the detection of analytes. By systematically optimizing the nanowire diameter, the diameter of the inner and outer layer air hole, the width of the groove, the polishing depth, and the distance from the outer layer air hole to the fiber core, the optimal structure of the sensor is finally determined. In this study, the sensor was studied by numerical analysis, and the characteristics of the sensor were evaluated by wavelength detection technology. The results show that within the RI range of 1.24–1.37, the sensor has a maximum wavelength sensitivity (WS) of 54700 nm/RIU for detecting the RI of analytes. Within the above refractive index range, the regression coefficient R2 of the dual-peak-resonance wavelength is 0.99993, ensuring the accuracy of the estimated resonance wavelength of the sensor. In addition, the sensor can also use dual-peak-shift sensitivity (DPSS) to detect the refractive index, which is a relatively new sensing technology. The maximum DPSS of the sensor is 95300 nm/RIU. Due to its high sensitivity and unique dual-peak characteristics, this sensor has wide application prospects in medical diagnosis, environmental monitoring, food safety, and other fields.

[formula omitted] modified U-shaped fiber surface plasmon resonance sensor with high sensitivity

Design of optical fiber structure and sensitive material coating are two effective performance improvement approaches for fiber optic surface plasmon resonance (SPR) sensors. Here, a tungsten diselenide (WSe2) modified U-shaped fiber optic SPR sensor is proposed. It is found that the sensing performances of the proposed U-shaped probe can be controlled with the thickness of gold film, WSe2 layers, and bending radius of the U-shaped fiber. A sensitivity of 27520 nm/RIU (RIU: refractive index unit) is obtained with the optimized U-shaped probe, which is about 11.56-fold and 12.29-fold improvements over the traditional in-line transmission fiber optic SPR sensors without WSe2 coating and with monolayer WSe2, respectively. These results demonstrate a promising approach for sensitivity improvement of fiber optic SPR sensors, and the proposed WSe2 modified U-shaped fiber optic SPR sensor may have prospective potential applications in biological sensing, chemical sensing, and environmental monitoring.

Optical fiber SPR probe platform combined with oriented antibody optimized modification for ultrasensitive and portable detection of human thyroglobulin

Thyroglobulin (Tg) is an essential indicator for monitoring differentiated thyroid cancer. However, there are still significant challenges in achieving fast, accurate, and efficient point-of-care testing (POCT). This paper presented an optical fiber bioprobe platform technology based on the ultrasensitive sensing principle of surface plasmon resonance (SPR), aiming to achieve an efficient and precise immunoassay of Tg. The fiber probes were modified with Tg antibodies to form fiber Tg probes. After optimization of the oriented antibody modification, the detection sensitivity of fiber Tg probes increased by 3 times, facilitating one-step direct detection of μg-level sample concentrations such as thyroid tissue fluid samples. For ng-level sample concentrations such as blood samples, a two-step measurement method was used to amplify the surface load signal. Through Tg detection studies in different concentration ranges and background environments, our fiber Tg probes exhibited a sensitivity of 81.99 pm / (ng / mL) and a limit of detection of 1.4 ng / mL, and were able to complete ng-level detection in serum backgrounds. The fiber Tg probe holds immense potential in the diagnosis and postoperative monitoring of thyroid cancer. Additionally, being a miniature, disposable, reliable, and portable quantitative optical immunoassay tool, it can serve as a rapid detection instrument for various target proteins and pathogens by simply altering the modified antibody.

Gratings for enhanced sensitivity: advancing D-shaped optical fiber surface plasmon resonance sensors with Ag-Fe2O3 structures

This research delves into enhancing biosensing sensitivity by optimizing D-shaped optical fiber surface plasmon resonance (SPR) sensors employing Ag-Fe2O3 structures. By investigating the influence of different grating structures—rectangular, triangular, and elliptical—on sensor performance, a comprehensive analysis was conducted to ascertain the impact of these structural variations on sensitivity and detection precision. The study revealed that while the rectangular structure exhibited a sensitivity of 6.4 µm/RIU, the triangular structure outperformed with an impressive sensitivity of 7.2 µm/RIU. Moreover, the detection accuracy, quantified by the detection angle (DA), reached 15.7(µm)−1 for the triangular grating, surpassing the rectangular grating’s detection angle of 14.8(µm)−1. These results underscore the crucial role of structural design in enhancing sensor performance, with the triangular grating demonstrating superior sensitivity and detection precision in the context of plasmonic resonance. The extended detection range of refractive indices around 1.39 further expands the sensor’s applicability in diverse chemical and biomedical analyses. Notably, the sensor’s capability to detect various chemical solutions and diseases—including plasma, tuberculosis, white blood cells, and breast cancer cells—underscores its versatility and efficacy in dual-parameter detection. Through meticulous simulations and analysis, this study provides valuable insights into optimizing sensor sensitivity, detection accuracy, and application versatility, paving the way for advanced developments in biosensing technology with far-reaching implications for chemical and biomedical research.

Cascaded dual-parameter SPR fiber sensor for RI and pH simultaneous detection based on Ag film and an Ag/self-assembled nanofilm structure

To achieve more accurate analysis and detection of changes in liquid parameters, we propose a dual-parameter surface plasmon resonance (SPR) sensor that can measure refractive index (RI) and pH simultaneously. In this paper, we compare and analyze the transmission spectrum when the SPR effect is excited by the cladding mode of a photonic crystal fiber (PCF) and the core mode of the no-core fiber. The results show that the SPR effect excited using the cladding mode is stronger and the sensor has better loss peaks, which is more conducive to realizing the detection of the external environment. Therefore, the sensor uses PCF as the substrate and utilizes a cascade composite film structure, and the area where a silver film is deposited on the surface of the PCF is selected as the RI sensing area. Another part of the PCF, after the silver film is deposited, uses a high-sensitivity polyacrylic acid/chitosan self-assembled nanofilm as the pH-sensitive film. Experimental results show that the maximum sensitivity is 4122.44 nm/RIU and -57.82 nm/pH when the RI range is between 1.333 and 1.385 and the pH range is between 3.11 and 8.63, respectively. In addition, we experimentally verified that the sensor had good stability and repeatability. The design of the sensor provides new possibilities for real-time monitoring and precise control, helping to advance scientific research and the development of industry.

Surface electric field enhanced biosensor based on symmetrical U-tapered HCF structure for gastric carcinoma biomarker trace detection

In this article, a novel U-tapered hollow-core fiber (HCF) surface plasmon resonance (SPR) biosensor coated with PtS2 for early-stage gastric carcinoma (GC) diagnosis was demonstrated. The article proposed the first investigation to detect Interleukin-10 (IL10) and Interleukin-1β (IL1β) which were associated with the risk of developing gastric carcinoma, using optical fiber SPR technology. Herein, the sensitivity of sensor was effectively improved through a combination of tapered and U-shaped structures. Additionally, to further enhance the detection capability, two-dimensional material PtS2 was utilized to increase the surface electric field intensity of the sensor. Simultaneously, optimization of structural parameters such as taper ratio, bending diameters, and Au film thickness was conducted. Ultimately, the designed sensor achieved a remarkable sensitivity of 13210 nm/RIU within the refractive index (RI) range of 1.33–1.37. The sensor demonstrated exceptional performance, achieving sensitivities of 3.64 nm/(ng/ml) and 7.46 nm/(ng/ml) for the detection of IL10 and IL1β biomarkers, respectively, along with limit of detection (LOD) of 2.74 pg/ml and 1.33 pg/ml, and successfully detecting the presence of these biomarkers in the serum of gastric cancer patients. Overall, the proposed sensor exhibits significant potential in early gastric cancer detection and advances the application of optical fiber SPR sensors in trace biodetection.

Simulation analysis of a photonic crystal fiber refractive index sensor based on a double-layer film structure and surface plasmon resonance technology

A photonic crystal fiber surface plasmon resonance sensor based on a double-layer membrane structure is designed and analyzed. In the simple sensing structure with only one air hole size, TiO2 and Au layers with specific thicknesses are sequentially coated on the optical fiber to form a double-layer structure. The sensing characteristics of the double-layer membrane structure are studied by the finite element method. Compared to the single-layer membrane structure, the double-layer membrane sensor has significant sensing properties such as a better wavelength sensitivity and a smaller full width at half maximum in the loss spectrum. In the refractive index range between 1.37 and 1.43, the maximum wavelength sensitivity and average wavelength sensitivity of the sensor are 19,900 nm/RIU and 7417 nm/RIU, respectively, and the resolution can be up to 5.03×10−6RIU. The proposed photonic crystal fiber optic sensor achieves high performance with a simpler sensing structure than previous photonic crystal fiber optic sensors, and eliminates the step of polishing, which will greatly reduce the difficulty of actual fabrication and the error due to uneven polishing. The results show that the photonic crystal fiber optic sensor with a double-layer membrane structure has excellent performance. Due to its high sensitivity and resolution, it has great potential for applications in environmental monitoring, biosensing and chemical sensing.

Highly sensitive near-field leakage-enhanced optical fiber SPR sensor based on gold nanoarrays modulation

A novel near-field leakage-enhanced optical fiber surface plasmon resonance (NLF-SPR) sensor based on the synergistic sensitization of cuboid gold nanoarrays and WSe2 film is proposed for the first time to our knowledge. The sensor is composed of a side-polished multimode fiber, a continuous gold film, a continuous tungsten selenide (WSe2) film, and well-arranged cuboid gold nanoarrays. The sensor leverages the high carrier mobility characteristic of the WSe2 film, the near-field leakage enhancement arising from the nanoarrays structure, and the localized electric field enhancement property introduced by nanotips to enhance the refractive index sensitivity. In order to optimize the spectral characteristic, the modulation of electric field distribution and spectral characteristic by the structural parameters of gold nanoarrays is investigated through three-dimensional (3D) finite element simulation. Results show that in the refractive index range of 1.3332–1.3432 refractive index unit (RIU), the average sensitivity of the NLF-SPR sensor can reach up to 10108 nm/RIU, and the highest sensitivity can reach up to 14692.46 nm/RIU. The average sensitivity and the highest sensitivity are 1.87 times and 2.56 times higher, respectively, than those of the side-polished fiber SPR sensor with a monolayer gold film. Furthermore, the experimental results demonstrate that the near-field leakage enhancement introduced by gold nanoarrays improves the performance of the fiber SPR sensor, resulting in a 49.3 % increment in sensitivity. The experimental results are in agreement with the trend of the simulation results. Even better performance improvements have been achieved compared to existing methods and a more flexible approach to performance tuning is provided. With the maturity and development of various nanoarray processing techniques such as focused ion beam, electron beam lithography, and nanoimprint lithography, the proposed NLF-SPR sensor has the potential to be fabricated on a large scale and is expected to be widely employed in biomedical, clinical applications, and other fields.

Optical fiber sensor based on magneto-optical surface plasmon resonance with ultra-high figure of merit

Compared to surface plasmon resonance (SPR), the sensors based on the magneto-optical SPR (MOSPR) technique have much higher figure-of-merit (FOM). However, there are no reports about applying MOSPR in the optical fiber structure now. In this work, a novel D-shaped optical fiber sensor based on the MOSPR technique is proposed. The D-shaped optical fiber is coated with a thin silver film and a magneto-optical (MO) material film of Cerium-doped Yttrium-Iron garnet (CeYIG). By applying a magnetic field on the sensing region, the magneto-optical Kerr effect (MOKE) of the CeYIG layer and the related MOSPR phenomenon could be excited when appropriate light is transmitted in the proposed optical fiber sensor. The influence of the structural parameters including the residual cladding thickness, silver and MO material film thicknesses are analyzed theoretically by the finite element method (FEM). With the optimal parameters, the sensor achieves the sensitivity of 5304 nm RIU−1. Since the peak width of MOSPR spectra is much narrower than that of the SPR spectra, the FOM of the sensor is largely enhanced to 3864 RIU−1 on average and 13260 RIU−1 in maximum, which surpasses the optical fiber SPR sensors vastly. The miniaturized and simple design of the D-shaped optical fiber MOSPR sensor, coupled with the ultra-high FOM, offers itself great potential in biochemical sensing applications.

Triple-Channel Optical Fiber Surface Plasmon Resonance Sensor for Simultaneous Detection of Relative Humidity, Magnetic Field, and Temperature

Triple-Channel Optical Fiber Surface Plasmon Resonance Sensor for Simultaneous Detection of Relative Humidity, Magnetic Field, and Temperature

Surface plasmon resonance sensor of hollow microstructure fiber based on ZIF-8 thin film

An annular hollow microstructured fiber surface plasmon resonance (SPR) sensor based on ZIF-8 film is proposed for the measurement of CO2 concentration in air. Internal detection is adopted to enhance the spectral response to CO2 gas, and nano-gold pillars are embedded on both sides of the channel. The geometric parameters of the sensor are optimized to achieve an average sensitivity of 1.01 nm/% over the range of CO2 concentration from 0% to 100%. The results indicate that the sensor is a promising SPR gas sensor with great potential in CO2 detection applications.

Symmetrical dual-D and dual-core single-mode fiber surface plasmon resonance liquid sensor

A symmetrical dual-D and dual-core single-mode fiber surface plasmon resonance (SPR) liquid sensor is designed for biological detection. The dual-core design optimizes the transmission path, improves the momentum matching between free electrons and photons, and facilitates bidirectional coupling, consequently amplifying the SPR effect and enabling sensitive monitoring of the refractive index changes of biological solutions. In this structure, a gold wire is placed in the middle of the polished surface of the double-D-shaped single-mode fiber (SMF) to produce high-quality free electrons and promote the mode-coupling excitation of the SPR effect. The characteristics of the sensor are analyzed by the finite element method, and the important structural parameters are optimized systematically. The sensor can be operated in the near-infrared region for a refractive index (RI) range of 1.31–1.40 with a maximum wavelength sensitivity (WS) of 21,000 nm/RIU, amplitude sensitivity of 586.62RIU−1, as well as resolution of 4.76×10−6RIU. Small changes in the refractive index can be detected by the sensor and it can be produced easily by conventional manufacturing techniques. The sensor thus has wide application prospects in biomedical and chemical analysis and related applications.

Numerical analysis of a single channel exposed core elliptical shaped PCF based highly sensitive SPR sensor for wide RI sensing

This study presents a numerical study of a highly sensitive photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor capable of detecting five types of cancer and bacterial contamination in water. By precisely arranging only two air holes in a single channel of an elliptical-shaped PCF, the sensor maximizes interaction between core-guided modes and surface plasmon polaritons (SPP) along the fiber. Evaluation using COMSOL Multiphysics simulation software, based on finite element method (FEM), demonstrates outstanding sensor performance across a wide refractive index (RI) range (1.33 to 1.43). With a maximum wavelength sensitivity (WS) of 188,000 nm/RIU and amplitude sensitivity (AS) of -22,377.99 RIU−1, the sensor achieveStructural Design and Methodologys a sensor resolution (SR) of 5.3191 × 10−7 RIU and figure of merit (FOM) of 854.55 RIU−1. Notably, it exhibits AS and WS values tailored for specific cancer cell types and water contamination. These results endorse the sensor’s potential in diverse biological and molecular analyte RI detection applications within the visible to near-infrared (VNIR) range (0.55 to 4 µm), offering high sensitivity, affordability, wide sensing range, good linearity, low propagation loss, and simplicity in construction.

S-shaped tellurite optical fiber surface plasmon resonance sensor for temperature and refractive index measurement

In this paper, an all-fiber S-shaped structure optical fiber surface plasmon resonance (SPR) sensor is proposed for temperature and refractive index measurement. The sensor is made of a single-mode tellurite optical fiber (TOF), and the middle part of the single-mode TOF is heated by a ceramic heating rod to form an S-shaped sensing region, and a 50 nm gold film is deposited in the S-shape sensing area to excite SPR. Based on the excellent properties of tellurite optical fiber, the prepared optical fiber sensor can be used for high sensitivity temperature and refractive index detection. The highest refractive index sensitivity is up to 1068.59 nm/RIU in the range of 1.333–1.380, and the temperature sensitivity is up to −0.713 nm/°C in the range of 30–150 °C. The proposed sensor is simple to fabricate, low-cost, and compact, and can be widely used in biochemical analysis, complex environmental temperature monitoring and other fields.

A PCF-SPR sensor for dual-polarization and wide refractive index detection range

In this paper, we design a novel H-shaped photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor, which is composed of a dual-sided U-shaped groove and an Ag–MoS2 coating. The proposed sensor exhibits an asymmetrical structure with birefringence, which provides a possible way to detect the refractive index (RI) of analytes with dual-polarization. Based on the finite element method (FEM) simulations, the influences of the structural parameters on the sensing performances are discussed. For y-polarization, the proposed sensor detects the changes of RI from 1.37 to 1.41 with a maximum wavelength sensitivity of 11,700 nm/RIU, while for x-polarization, RI changes from 1.29 to 1.35 with a maximum sensitivity of 7800 nm/RIU. Thus, a PCF-SPR sensor with dual-polarization and wide RI detection range is achieved, which holds significant promise for applications in biology, medicine, and food safety.

Simultaneous measurement of temperature and humidity using a dual-parameter sensor based on SPR and no-core fiber technology

In this article, we present a surface plasmon resonance (SPR) sensor based on a no-core fiber (NCF) structure for simultaneous measurement of temperature and humidity. The sensor is simulated by depositing a silver film on the exterior of the NCF by magnetron sputtering, followed by the application of a composite thin film of polyvinyl alcohol (PVA) and polydimethylsiloxane (PDMS). This configuration induces SPR resonance phenomena at two distinct wavelengths, resulting in the splitting of the resonance peak into two distinct peaks, enabling simultaneous measurement of temperature and humidity. To achieve optimal sensor performance, the thickness of the PDMS-PVA composite film, the proportion of sensitive materials, the thickness of the silver film, and the structural parameters of the fiber were optimized. Simulation results show that the sensor exhibits a humidity sensitivity of 8.60 nm/%RH over a relative humidity (RH) range of 50%–100%. The highest temperature detection sensitivity achieved is 7.40 nm °C−1. This sensor holds great potential for applications in monitoring changes in environmental temperature and humidity.

Hydrogel binding sodium alginate based optical fiber surface plasmon resonance for calcium ion trace detection

A plasmonic tilted fiber Bragg grating (TFBG)-based sensor for the detection of calcium ion (Ca2+) was proposed and demonstrated experimentally. Hydrogel material was synthesized by utilizing hydrogen bond recombination between cellulose nanocrystals (CNC) and polyvinyl alcohol (PVA). Sodium alginate (SA) was incorporated into this hydrogel material, resulting in a composite membrane with specific binding properties for Ca2+. The membrane was applied as a coating on the surface of a gold-coated TFBG. The CNC/PVA-SA modified gold on the TFBG surface enhanced the localized refractive index changes caused by variations of Ca2+ concentrations. The experimental results demonstrated an impressive limit of detection (LOD) of approximately 0.025 fM, which is five orders of magnitude better than the current LODs of similar Ca2+ sensors. And the proposed Ca2+ sensor exhibited a wide dynamic range of 10−16 M to 10−6 M.