Fiber Surface Plasmon Resonance Sensor Research Articles

Wave type fiber SPR sensor for rapid and highly sensitive detection of hyperoside

The fiber surface plasmon resonance (SPR) sensor used for the detection of active ingredients in traditional Chinese medicine has the problems of low sensitivity and difficult specific recognition. This paper proposed a wave type fiber SPR sensor, which reduced the mode of transmitted light through a periodic wave structure and caused concentrated and total reflection of the transmitted beam at the interface between the bent peak cladding and the air. A 50 nm gold film was coated on the surface of the cladding in the wave structure area to form the SPR sensing area. By controlling the width and height of the wave structure to control the total reflection angle of the transmitted light, i.e., the SPR incidence angle, the sensitivity of the fiber SPR sensor was effectively improved to 4972 nm/RIU. Furthermore, HSP90AA protein was modified on the gold film of the sensor to achieve specific detection of hyperoside. The longest single detection time was only 3 minutes, and the detection sensitivity was 0.53 nm/(µg/ml), with a detection limit as low as 0.68µg/ml, which is comparable to liquid chromatography. The proposed wave type fiber SPR sensor is fast in production and has high structural mechanical strength, providing a new approach for the rapid, highly sensitive, and specific detection of active ingredients in traditional Chinese medicine.

Reflective optical fiber SPR sensor with DNA modification for high-sensitive Hg2+ concentration measurement

A reflective optical fiber surface plasmon resonance (SPR) sensor was proposed to measure the concentration of mercury ions (Hg2+). The specific single-stranded DNA was modified on the optical fiber sensing surface coated with Au film by the combination of covalent bond and charge adsorption. The Hg2+ can mismatch with T-T (thymine-thymine) base pairs in single-stranded DNA to form T-Hg2+-T structure, which led to the change of refractive index in sensing area and the wavelength shift of SPR spectrum. The measurement results showed that when the concentration of Hg2+ increased from 0 μM to 13 μM, the resonance spectrum shifted by 14.26 nm. In the linear range between 1–8 μM, the measurement sensitivity of the sensor could reach 1.51 nm/μM. The limit of detection (LOD) was found to be 0.28 μM. Besides, the sensor showed good stability, selectivity and reusability.

Sodium-based no-core fiber surface plasmon resonance sensor with high sensitivity and narrow FWHM

Since fiber-optic sensors using noble metal-excited surface plasmon resonance (SPR) effects have encountered bottlenecks in improving performance, we propose a fiber-optic sensor using sodium in combination with a no-core fiber (NCF) to measure both refractive index (RI) and temperature. We deposited sodium thin films on the surface of NCF optical fibers and protected them with polymethyl methacrylate (PMMA) or polydimethylsiloxane (PDMS) for RI sensing or temperature sensing. We performed computational simulations and performance analyses of the sensors using the finite element method, and the results show that the sodium-based SPR sensors have higher sensitivity, wider detection range, and narrower full width at half-maximum (FWHM) than the noble metal SPR sensors. SPR sensors with different sodium film thicknesses have different sensing characteristics, so we can get optical fiber sensors with more flexible transmission characteristics, which helps us arrange sensors more conveniently in practical applications. The simulation and numerical results show that when the sensor is used to measure RI, the average sensitivity of the sensor can reach 7977 nm RIU−1, the maximum sensitivity can reach 23100 nm RIU−1, the narrowest FWHM is 14.23 nm, and the maximum figure of merit (FOM) is 719.42 RIU−1 under different thicknesses of sodium film. The corresponding RI ranges from 1.32 to 1.41. When the temperature measurement range is 0 °C ∼ 100 °C, the average sensitivity can reach 7.86 nm °C−1, the maximum temperature sensitivity can reach 21.1 nm °C−1, and the narrowest FWHM is 17.84 nm. In summary, the proposed sodium-based SPR sensor has flexible and high-performance sensing characteristics, and our research work provides more powerful theoretical support for the application of sodium-based plasma devices.

Highly-Sensitive Polymer Optical Fiber SPR Sensor for Fast Immunoassay

A new type of human immunoglobulin G (IgG) sensors based on the surface plasmon resonance (SPR) in the low refractive index (RI) plastic optical fiber (POF) and an antibody immobilization method is presented. A 50-nm-thick gold film was formed on the polished D-shaped fiber surface by magnetron sputtering. The RI response of the POF sensor is 30 049.61 nm/RIU, which is 26.5 times higher than that of single mode fiber (SMF) SPR sensors. The proposed SPR biosensor can be developed by simple and rapid modification of the gold film with 11-mercapto undecanoic acid (MUA). Upon immobilization of the goat anti-human IgG antibody, the resonance wavelength shifts by 11.2 nm. The sensor can be used to specifically detect and quantify the human IgG at concentrations down to 245.4 ng/mL with the sensitivity of 1.327 7 nm per µg/mL, which offers an enhancement of 12.5-fold compared to that of the conventional SMF based SPR sensors. The proposed device may find the potential applications in the case of use at the point of care.

High sensitive optical fiber SPR sensor for label-free detection of Staphylococcus aureus

Optical fiber bacterial sensors have attracted attention in many fields due to their unique advantages. However, it is still difficult to promote its practicality which is mainly subject to their low sensitivity, inferior stability, and reliability. This work reported here an optical fiber surface plasmon resonance (SPR) biosensor enhanced by gold nanoparticles (AuNPs)/Au film coupling for label-free detection the Staphylococcus aureus (S. aureus), while both the gold substrates were successfully biofunctionalized with goat anti-human immunoglobulin G (IgG) as the probe to capture and detect the bacteria. In the experiment, the refractive index（RI） sensitivity of the Multimode-Singlemode-Multimode optical fiber (MSMOF) coated with Au film was improved by 19 % after the AuNPs were homogeneously decorated on the Au film surface. To detect S. aureus by the sensor, the SPR wavelength variation in the transmission spectrum was recorded, and its limit of detection (LOD) was demonstrated experimentally to be about 50 CFU/mL and was obtained theoretically to be 1.18 CFU/mL during its concentration range of 50–108 CFU/mL. Also, it shows great linearity in the range of 102-108 CFU/mL and the sensor exhibits excellent specificity and stability. This kind of SPR-enhanced optical fiber biosensor is fully promising for its applications in biomedicine, food safety, pharmaceuticals, etc.

High sensitivity fiber SPR sensor based on InSe nanosheets and Au nanoparticles

Surface Plasmon Resonance (SPR) fiber sensors are widely used in the field of biosensing. However, there are still issues of low sensitivity and poor stability in practical detection processes. This paper proposes a highly sensitive fiber SPR sensor based on InSe nanosheets and Au nanoparticles. This paper investigates the enhancement effects of different thicknesses of InSe films inserted between the Au film and the fiber and the adsorption of Au nanoparticles on the Au film surface of the fiber-InSe-Au sensor. The sensitivity of the fiber-InSe-Au sensor reaches 5534.76 nm/RIU, which is 2.71 times higher than the fiber-Au sensor and a 22% improvement compared to the fiber-Au-InSe sensor. The sensitivity of the fiber-InSe-Au-AuNPs sensor further increases to 5853.75, and the FOM reaches 28.11, a 47% improvement compared to the fiber-InSe-Au sensor. Moreover, the enhancement substance is situated within the Au film, which enhances the sensor's stability. Additionally, due to the low biotoxicity and high biocompatibility of Au nanoparticles, the high-performance sensor designed in this study is exceptionally well-suited for biosensing applications.

MnO2-based dual channel surface plasmon resonance fiber sensor for trace glutathione and refractive index detection.

Glutathione (GSH) plays vital role in human biological systems, so its rapid and sensitive detection is necessary for health condition monitoring. In this work, a simple structure for dual channel GSH and refractive index (RI) detection is proposed. By introducing Au-MnO2 thin film coating on the fiber surface for the first time, GSH solution would lead to the dissolution of MnO2, the change in GSH levels could be monitored over a short period in channel 2. For channel 1, ITO-Ag thin film is applied for RI change detection. After optimization, the GSH detection sensitivity reached about -2.361 nm/mM in the range of 0.005-50 mM, and the RI sensitivity reached 1704.252 nm/RIU in the range of 1.331-1.3895 RIU. Channel 1 could also put into GSH detection in the high concentration scale to enlarge the sensor's range and 0.095 nm/mM of sensitivity is acquired within the range of 50-600 mM. With the presence of MnO2 film, the detection sensitivity increased 25.663 times. Neither channel interferes with the operation of the other. Proposed sensor provides stability, high selectivity and elevation in GSH detection sensitivity, which shows great potential for environmental and biological detection field and their applications.

Au-MgF2-Coated Photonic Crystal Fiber Surface Plasmon Resonance Sensor with High FOM

Au-MgF2-Coated Photonic Crystal Fiber Surface Plasmon Resonance Sensor with High FOM

Optical fiber surface plasmon resonance sensor using electroless-plated gold film for thrombin detection.

This paper describes the simple and label-free detection of thrombin using optical fiber surface plasmon resonance (SPR) sensors based on gold films prepared by the cost-effective method of electroless plating. The plating conditions for simultaneously obtaining gold film on cylindrical core and end surfaces of anoptical fiber suitable for measurement were optimized. The fabricated sensor exhibited a linear refractive index sensitivity of 2150 nm/RIU and 7.136 (a.u.)/RIU in the refractive index of 1.3329-1.3605 interrogated by resonance wavelength and amplitude methods respectively and a single wavelength monitoring method was proposed to investigate the sensing performance of this sensor. Polyadenine diblock and thiolated thrombin aptamers were immobilized on gold nanoparticles and gold films respectively to implement asandwich optical fiber assay for thrombin. The developed optical fiber SPR sensors were successfully used in the determination of thrombin down to 0.56 nM over a wide range from 2 to 100 nM and showed good selectivity for thrombin, which indicated their potential clinical applications for biomedical samples.

Dual Polarized High Sensitivity Photonic Crystal Fiber Surface Plasmon Resonance Sensor Coated with Indium Tin Oxide

Dual Polarized High Sensitivity Photonic Crystal Fiber Surface Plasmon Resonance Sensor Coated with Indium Tin Oxide

RI and temperature sensor based on hybrid sensing mechanism of SPR and MZI using a four-core fiber

A dual-parameter sensor based on a hybrid sensing mechanism of surface plasmon resonance (SPR) and Mach–Zehnder interference (MZI) using a four-core fiber (FCF), is proposed and implemented. The designed sensor is fabricated by cascading a sandwich structure of the FCF, multimode fiber and lead-in/out single-mode fiber. The gold-coated FCF as the critical component, enabling the excitation of the SPR and MZI for measuring refractive index (RI) and temperature. The proposed sensor exhibits a high RI sensitivity of 2091 nm/RIU and a temperature sensitivity of 0.0398 nm/°C. The proposed dual-parameter sensor based on FCF provides a new insight for the design of fiber SPR sensor, which can be used to measure multiple physical parameters in various fields such as biochemistry, gene diagnosis, environmental monitoring, and so on.

Silver-coated hollow fiber surface plasmon resonance sensor for glucose detection with enhanced limit of detection.

A fiber-optic surface plasmon resonance (SPR) biosensor based on a silver-coated hollow fiber (HF) structure for glucose detection is presented. The sensor surface was immobilized with 4-mercaptophenylboronic acid (PMBA) acting as a glucose recognition monolayer. Then, gold nanoparticles (AuNPs) modified with 2-aminoethanethiol (2-AET) and PMBA were introduced onto the sensor surface after glucose was captured to enhance the wavelength shift of the SPR phenomenon excited by the light transmitted in the wall of the HF sensor. Instead of the conventional one-step sensitization pretreatment commonly used in the deposition process of silver films for fiber-optic SPR sensors, a sensitization-activation two-step activation method was adopted in the fabrication of the proposed sensor. Experiments for glucose detection were performed on the fabricated sensors in the concentration range of 1 nM-1 mM. Results showed that the sensor fabricated by the two-step activation method has a much larger shift of resonance wavelength than the sensor fabricated using the one-step sensitization method. The resonance wavelength shift was found to be linear to the logarithm of the concentration in the range of 1 nM-1 mM. The sensor achieved a limit of detection (LOD) of as low as 1 nM, which is at least an order of magnitude lower than that of other fiber-optic sensors for glucose detection reported previously. The presented HF glucose sensor has the potential for biosensing applications and provides a large reference value in the study of optical fiber SPR sensors for biosensing.

Advanced Integration of Glutathione-Functionalized Optical Fiber SPR Sensor for Ultra-Sensitive Detection of Lead Ions.

It is crucial to detect Pb2+ accurately and rapidly. This work proposes an ultra-sensitive optical fiber surface plasmon resonance (SPR) sensor functionalized with glutathione (GSH) for label-free detection of the ultra-low Pb2+ concentration, in which the refractive index (RI) sensitivity of the multimode-singlemode-multimode (MSM) hetero-core fiber is largely enhanced by the gold nanoparticles (AuNPs)/Au film coupling SPR effect. The GSH is modified on the fiber as the sensing probe to capture and identify Pb2+ specifically. Its working principle is that the Pb2+ chemically reacts with deprotonated carboxyl groups in GSH through ligand bonding, resulting in the formation of stable and specific chelates, inducing the variation of the local RI on the sensor surface, which in turn leads to the SPR wavelength shift in the transmission spectrum. Attributing to the AuNPs, both the Au substrates can be fully functionalized with the GSH molecules as the probes, which largely increases the number of active sites for Pb2+ trapping. Combined with the SPR effect, the sensor achieves a sensitivity of 2.32 × 1011 nm/M and a limit of detection (LOD) of 0.43 pM. It also demonstrates exceptional specificity, stability, and reproducibility, making it suitable for various applications in water pollution, biomedicine, and food safety.

Experimental study of SPR sensor performance enhancement by metal oxides

With the widespread application of fiber surface plasmon resonance (SPR) sensors in the field of biochemical sensing, especially in the detection of large molecules such as proteins, the sensitivity of traditional fiber SPR sensors has made it difficult to meet the requirements of detection accuracy in practical applications. This article proposes and proves an effective method for selecting the optimal metal oxide material to improve the sensing performance of SPR sensors. Metal oxides (TiO2 and ZnO) can improve the sensitivity by enhancing the evanescent field of fiber SPR phenomenon. Through simulation, it was found that when the metal oxide film of the composite film sensor maintains the same thickness, the metal oxide with a high effective refractive index (RI) has a better improvement effect on the sensitivity of the SPR sensor. Experimental results show that the maximum RI sensitivity of TiO2 composite film sensors and ZnO composite film sensors in the RI range of 1.333–1.420 is 15,200 nm/RIU and 13,600 nm/RIU, respectively. Compared to silver-based sensors, RI sensitivity has increased by 16.92 % and 4.62 %, respectively. To further verify the enhancement effect of different metal oxides on fiber sensors, another layer of PDMS film is deposited on TiO2 and ZnO films. Within the temperature sensing range, the maximum temperature sensitivity of these two composite film temperature sensors is 4.9 nm/°C and 4.3 nm/°C, respectively. Overall, metal oxides with high RI can improve the sensing performance of fiber optic sensors.

Simulation of a Sensitive Mid-infrared (MIR) D-Shaped Optical Fiber Water Pollutant Sensor

AbstractIn this work, an efficient optical sensor is proposed for the sensitive detection of various pollutants in water. The suggested optical sensor is based on an indium fluoride (InF3) glass fabricated as a D-shaped optical fiber. The polished surface of the D-shaped fiber is coated with a gold grating to induce the surface plasmon resonance (SPR). The SPR depends on the optical properties of the polluted water analyte in physical contact with the grating. The proposed optical SPR fiber sensor operates within the mid-infrared (MIR) range (3000–4500 nm) to detect any slight change in the water refractive index (RI) due to any pollutants. The full vectorial finite element method (FVFEM) is utilized to calculate the modal properties of the reported sensor. High sensor sensitivity of 17,834 nm/RIU (refractive index units) is achieved for the detection of dissolution of nitric acid (HNO3) in water at a concentration of 14% v/v (volume/volume). Additionally, the reported sensor detects the dissolution of hydrogen peroxide (H2O2) in water investigated at concentrations of 15% v/v and 30% v/v, with sensitivities of 12,308 nm/RIU and 17,143 nm/RIU, respectively. Further, suspending polystyrene beads of diameter 0.1 μm in the water at a concentration of 10% v/v gives a maximum sensitivity of 5333 nm/RIU. Therefore, the proposed sensor provides a promising approach for the detection of water pollutants in the MIR wavelength regime, rather than the weaker response in the near infrared.

High-sensitivity optical fiber SPR sensor with cascaded biconical fiber and hetero-core structure for simultaneous measurement of seawater salinity and temperature

A novel dual-channel optical fiber surface plasmon resonance (SPR) sensor, which achieves high-sensitivity simultaneous measurement of seawater salinity and temperature, was designed and verified. The hetero-core structure based on no-core fiber (NCF) with 40 nm thick Au film and polydimethylsiloxane (PDMS) overlaying was utilized to excite the SPR effect and serve as the temperature sensing channel. In order to effectively separate from the temperature SPR dip, a silver/gold bimetallic film was deposited on the surface of the biconical fiber with a grinding angle of 14° to construct the salinity channel cascaded with the temperature channel, where the metal thickness was determined as Ag/Au: 30 nm/10 nm. The simulation and experimental results showed that the bimetallic film used in this article can significantly improve the figure of merit (FOM) of the sensor compared with the optical fiber SPR sensor deposited with a single kind of metal film. In addition, further experimental results on salinity and temperature indicated that the proposed sensor had a salinity sensitivity of 0.73 nm/‰ and a temperature sensitivity of −2.43 nm/℃, and demonstrated the advantages of ease of manufacturing, acceptable repeatability, and good stability. Therefore, the proposed dual-channel optical fiber SPR sensor has high research value and application prospects in the field of ocean measurement.

Structural parameters optimization of tapered fiber SPR sensor based on BES algorithm

Aimed at the numerous parameters that affect the performance of fiber Surface Plasmon Resonance (SPR) sensor, which make it difficult to determine the optimal parameters by traditional mathematical modeling, on the one hand, a tapered fiber SPR sensor model is proposed to improve the detection sensitivity of sensor. On the other hand, a new intelligence algorithm with fast search speed and high search accuracy, Bald Eagle Search Algorithm (BES), is adopted to optimize the structural parameters of tapered fiber SPR sensor, including the metal film thickness (d2), sensing area length (L), taper ratio (TR), and measured refractive index (n3). At the same time, a comprehensive fitness function is defined to improve the optimization effect, which take the sensitivity, resolution and linearity of the proposed sensor model into account. In the verification process, establish three different optimization experiments, including one partition optimization, two partition optimizations and three partition optimizations. The experimental results indicate that the optimization effect of the three partition optimizations is the best, for three different optimization intervals, the obtained fitness function values are 80%, 81% and 78%, respectively. In addition, the performance of BES is compared with other five optimization algorithms, the results indicate that the best shape of SPR reflection spectrum can be obtained by BES, its average sensitivities is 2218.85 nm/RIU, which ranks first. Therefore, by three partition optimizations and BES algorithm, the optimized parameters are more representative, which make the obtained reflection spectrum based on the optimized parameters has smallest degradation. The proposed method can provide an efficient and intelligent design idea for SPR sensor, it can greatly increase the flexibility of SPR sensor design.

High linearity temperature-compensated SPR fiber sensor for the detection of glucose solution concentrations

In the realm of optical fiber sensing, conventional surface plasmon resonance (SPR) sensors often face challenges due to their low linearity, broad resonance, and susceptibility to external temperature changes. To that end, we evaluate a groundbreaking approach with a temperature-compensating SPR biosensor based on the Mach-Zehnder interferometer (MZI), featuring a novel tapered multimode fiber-single mode fiber-multimode fiber (MMF-SMF-MMF) architecture. Specifically, the SPR is excited on a silver film modified by reduced graphene oxide (rGO) and π-π stacked pyrene-1-boric acid providing specific glucose binding ability. The MZI effect compensating for ambient temperature influence on the SPR is realized with the MMF-SMF-MMF structure. The study also explores the use of Fast Fourier Transform (FFT) for separate, granular analysis of the MZI and SPR signals and improves the linearity of the sensor using a novel centroid-fitting technique. This method utilizes the shift of calculated centroid coordinates rather than the single dip resonance wavelength from SPR, enhancing the overall performance of the sensor. The experimental results demonstrate excellent glucose sensitivity of 2.819 nm/mM, a linear range of 0–10 mmol/L, a LOD of 0.12 mM/L and concurrent temperature compensation. Compact and easy to fabricate, the proposed SPR sensor provides a novel solution for accurate glucose concentration detection in human blood.

Modulation of the sensing bandwidth of dual-channel SPR sensors by TiO2 film

Facing the diversity and complexity of the types of parameters to be measured, multi-channel surface plasmon resonance (SPR) fiber sensors provide an excellent solution. However, the sensing bandwidth is a key factor affecting the sensor performance. In this paper, we explore a method to modulate the sensing bandwidth using the TiO2 film. A dual-channel SPR sensor with a wide sensing bandwidth is proposed. In this sensor, no-core fiber (NCF) is used as the sensing probe, and multimode fibers are used for the transmission of optical signals. The sensor has a cascaded composite film structure, the region coated with Ag film as the refractive index sensing region and the region coated with Ag/TiO2/PDMS as the temperature sensing region. The experimental results show that the sensing bandwidth of the sensor varies for different TiO2 coating times. It indicates that the TiO2 film can regulate the sensing bandwidth flexibly. Therefore, to achieve the optimal sensing effect, the TiO2 coating time can be flexibly adjusted according to the RI characteristics of the environment. The maximum sensitivity of this dual-channel sensor is 4.5 nm/°C and 3151 nm/RU when the temperature range is between 10 and 80 °C and the RI range is between 1.333 and 1.385, respectively. In addition, we discuss the repeatability and stability of this dual-channel sensor.

Refractive index SPR sensor with high sensitivity and wide detection range using tapered silica fiber and photopolymer coating.

This paper introduces a surface plasmon resonance (SPR) sensor using tapered silica fiber and photopolymer coating for enhanced refractive index (RI) detection. Tapering the silica fiber to a diameter of 10 µm ensures the evanescent wave leaks into a 1.8-µm thick photopolymer film, which increases the average waveguide RI and broadens the RI detection range accordingly. A 50-nm thick single-side gold film is coated on the photopolymer film, exciting SPR and causing less light transmission loss than a double-side gold film. The method avoids the complex microfabrication processes of conventional polymer optical fiber SPR sensors, while the waveguide RI can be controlled by altering the curing time of the photopolymer during fabrication. The sensor has an overall sensitivity of 3686.25 nm/RIU, enabling RI detection of 1.333 - 1.493. Moreover, the sensor has an ultrahigh sensitivity of 6422.9 nm/RIU in the RI range of 1.423 - 1.493. The temperature response is about 1.43 nm/°C at 20 - 50 °C, which has little impact on RI detection. Finally, we demonstrate that the sensor can grade the severity of hepatic steatosis by measuring the RIs of cytoplasm/triglyceride emulsions with superior sensing performance.