Fiber Samples Research Articles

Mechanical characterization of natural fiber composites prepared with untreated and treated ficus religiosa root fibers

Surface modification techniques are used to modify the surface of the natural fibers in order to improve the surface characteristics; in turn other relevant significant properties of the fiber and its composites. In the present work, epoxy composites have been prepared with the untreated and treated F. religiosa root fiber samples at 5, 10, 15, 20, and 25 wt.% fiber loading. Mechanical properties such as tensile, flexural and impact strength of the prepared composite specimens have been tested as per the ASTM standards. From the results, it has been identified that the strength of the proposed composites increases with the increase in fiber loading, and the composites made up of 20 wt.% of the NaOH solution treated fiber sample exhibits better properties under mechanical characterization study. Alkalization filled the holes, cracks, and pores on the outer layer of fibers and significantly improved the surface roughness, which was reflected in the improvement of the proposed composites.

A Newly Bio-Based Material for the Construction Industry Using Gypsum Binder and Rice Straw Waste (Oryza sativa)

Construction is one of the economic sectors with the greatest influence on climate change. In addition to working procedures, the primary carbon footprint is attributed to the choice of materials and the energy required for their manufacturing. The underlying idea of this study is to minimize the effects and offer new solutions to emerging problems in the quest for materials that can be deemed as natural, such as gypsum (calcium sulphate dihydrate) and rice straw (Oryza sativa). The acquisition of these materials involves a lower carbon footprint compared to the conventional materials. It is well known since ancient times that gypsum and cereal straw can be used in construction, with numerous examples still available. Cereal straw is one of the oldest construction materials, traditionally combined with earth and occasionally with certain binders, with it continuing to be employed in construction in many countries to this day. This work showcases the feasibility of producing stable prefabricated elements from straw waste with construction gypsum, addressing a significant environmental concern posed by the alternative of having to burn such materials. In this study, for the proposed bio-based material, specific tests, such as thermal conductivity, flexural and compressive strength, and fire resistance, were carried out to evaluate the principal physical and mechanical characteristics for different compositions of water, gypsum, and straw fiber samples. The results highlighted the good performance of the proposed materials in order to spread their use in the green building industry. The addition of straw fibers improved, in different ways, some important physical characteristics of these components so as to diminish environmental pollution and to obtain better material performance. The tests highlighted the different behaviors of the proposed material with respect to the different cuts of the straw and as well as the water/gypsum ratio; this is not very well understood and probably depends on the micro structure of the straw fibers. The blocks with raw straw showed a significant improvement in the breaking mechanism (1775.42 N) compared to the blocks with cut straw (712.26 N) when subjected to bending tests, and their performance in compression tests was also acceptable. Additionally, a very interesting reduction in thermal conductivity was achieved by incorporating rice straw (0.233 W/mK), and high fire exposure times were obtained, with gypsum preventing the spread of ignition in any type of fiber.

On the physical-mechanical and tribotechnical properties of antifriction carbon fiber based on a modified thermosetting matrix

The physical-mechanical and tribological properties of anti-friction carbon fiber plastic UGET based on low-modulus carbon fabric “Ural T-15R” have been studied in order to increase the magnitude of the ultimate deformation and reduce the elastic modulus through the use of a modified thermosetting matrix ET-4 instead of the traditionally used ET-2.Modes of polymerization and of heat treatment of epoxy binders were selected considering the results of the experiments. Prototypes of prepregs were obtained by solution impregnation on the UPST-1000M line and then processed into PCM by hot pressing. Laboratory samples were made and physical and mechanical tests were carried out to determine the ultimate strength under compression, shear and bending stress under destruction, as well as Charpy impact strength. Steel 20Kh13 and oxidized titanium alloy PT-3V were used as counter body rollers to determine carbon fiber tribosets.It was shown that carbon fiber samples based on chemically modified binder ET-4 with two-stage polymerization and heat treatment mode in the range of 90°C to 180°C both have better physical-mechanical and tribotechnical properties, in contrast with the analogue with a three-stage mode and carbon fiber carbon heat at friction over 20Kh13 steel and oxidized titanium alloy PT-3V.

The Effect of Fiber Type on The Shear Capacity of Beams Manufactured By Using Geopolymer Concrete Based on Fly Ash

Ordinary Portland cement is currently generally used cementitious material in the construction industry. However, it has significant drawbacks as it not only depletes natural resources but also releases a substantial amount of carbon dioxide during its production process. On the other hand, alkali-activated cement is an alternative option that is derived from raw materials like slag, fly ash, and metakaolin, which contain silicon dioxide (SiO2) and aluminum oxide (Al2O3). This study investigates the shear capacity of fibre-reinforced geopolymer concrete (GPC) beams under shear loads. In the study, the shear behavior of beams produced from fly ash-based geopolymer of three different fiber types was determined by applying a three-point shear test. Four beams of 100x100x400 mm dimensions were produced: reference, steel fiber, basalt fiber and glass fiber. The results showed that using steel fiber has the greatest impact on shear capacity. In addition, the shear capacity of fibrous samples is greater than the shear capacity of the reference sample. The steel fiber sample has 203% more shear capacity than the reference sample.

Effect of hybrid sizings on the surface morphology, mechanical behavior of basalt fibers, and fiber/epoxy composite properties

AbstractIn the present study, the basalt fibers (BFs) were treated with hybrid sizings consisting silane coupling agent (3‐Glycidoxypropyl)trimethoxysilane, and silicon dioxide nanoparticles (SNPs). Using acetone washing and heat treatment, the commercial sizing previously on the BFs was removed. Next, the fibers were dip‐coated, and silanes condensed on the surface of the fibers. Fiber samples were characterized using thermogravimetric analysis (TGA), atomic force microscopy (AFM), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The test findings demonstrate that acetone extraction was an effective way to remove sizings. The AFM analysis and SEM micrographs demonstrate that SNP and silane particles were dispersed uniformly across the fiber surface. The single fiber tensile testing results indicated that the deposition of hybrid sizings enhanced the fibers strength. Because of the better adhesion between the fiber and epoxy, the hybrid sizings also improved the flexural strength by 22.28% and the interlaminar shear strength by 20.75%.Highlights Hybrid sizings (silanes and nano‐particles) on the basalt fiber surface. Characterization of the sizings and understanding of surface morphology. Hybrid sizings resulted in better tensile strength. Failure mechanisms of the fibers were observed using fractography. The effect of hybrid sizing on ILSS and flexural properties was observed.

Preparation and characterization of carboxymethyl microcrystalline cellulose from pineapple leaf fibre

Highly functional and robust biobased materials are still in research to produce valuable composites for various applications. The literature shows the gap of new raw biobased materials in market which can functionally tuned and structurally modified for development of 2d/3d architectures. Thus, in the present study, very cheap, easily available agricultural waste, pineapple leaf fiber (PL-raw) was used for the isolation of microcrystalline cellulose (PL-MCC) and further functionalized using upscaled chemical approach to carboxymethyl microcrystalline cellulose (PL-CMMCC). Very advanced techniques like Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray diffraction analysis (XRD), and differential scanning calorimetry (DSC) served to characterize the raw material, high crystalline PL-MCC, and modified carboxy methyl MCC. FTIR determined presence of different absorbed peak at approximately 1620.2 cm−1, and at 1423.8 cm−1, carboxyl groups were assigned to PL-CMMCC. On the other hand, the XRD findings verified that PL-CMMCC’s crystalline structure has decreased. Analysis by SEM revealed a damaged surface morphology for PL-CMMCC. Following chemical treatments, the EDX analysis revealed that each fiber sample contained a highly pure cellulose elemental composition. Thus, results explain the utilization of agricultural waste, pineapple leaf fiber to high valuable products like highly crystalline PL-MCC, in addition further modification of PL-MCC could leads to formation of highly functional material that could be used for other applications too in future.

Fibre Medullation Characteristics in Peruvian Llamas (Lama glama)

Background: The textile use of llama fiber, achieved through genetic improvement, llama selection and management, shows great potential for producing high-quality clothing and fabrics; providing an alternative income to highland residents who raise llamas. The aim of this research was to determine the fiber medullation of white Ch´aku and Q´ara color varieties of Llamas (Lama glama) from the communities of the Macusani district, Puno Peru. Methods: A total of 88 Llamas from the Ch´aku and Q´ara white color varieties, including males and females, from the age of milk teeth and two teeth, were used. Fiber samples of approximately 10 g were taken from the thigh, middle rib and shoulder, totaling 264 samples. Samples were analyzed at the Fiber Laboratory of the District Municipality of Corani, using the FIBER MED equipment. Data were analyzed in a completely randomized design (CRD) with a 2(variety) × 2 (sex) × 2 (age group) × 3 (body area) factorial arrangement. Result: The percentage of fiber medullation types in Ch´aku and Q´ara Llamas averaged 46.02% and 47.38%, showing no significant difference (p greater than 0.05). In Ch´aku Llamas, a statistical difference was observed by sex (p less than 0.05) for the percentage of medullated, non-medullated and continuous fibers in males and females. In Q´ara variety, there was a significant difference in the percentage of medullated, non-medullated and continuous fibers between milk teeth and two teeth age groups. There was no significant difference (p greater than 0.05) between body area samples.

High-temperature resistant boron nitride-based coatings for specialty silica optical fibers

h-BN is well known for its thermal stability. h-BN coated silica optical fibers were manufactured. The coating solution is compatible with optical fiber drawing process, which allows the preparation of tens of meter of h-BN coated fibers. In addition, it is possible to use this coating material for the preparation of short length fiber samples in a post-production approach. Bentonite acts as a binder and allows the adhesion of h-BN to the silica optical fiber. The thermal stability of this protected optical fiber has been demonstrated over a short period of time (several hours) up to 900 °C and over a long period of time (1500 h) up to 800 °C in air. Moreover, the coated optical fiber can resist up to 1000 °C in neutral atmosphere (tested over 6 h).

Acoustical characterization and modelling of the effects of eco-friendly flame retardant treatments on hemp fiber stacks

Vegetal wools are a bio-based insulator which building applications are limited due to their flammability. To overcome this problem while respecting their bio-based nature, it seems relevant to identify and apply an environmentally friendly fireproof treatment. However, the impact of this treatment on the acoustic performance of the vegetal wools is not examined in the literature. The objective of this work is to evaluate the efficacy of two phosphorus-based fireproof treatment methods i.e., impregnation and pulverization, and their impact on the acoustic properties of hemp fiber stacks. To assess the efficacy of the fireproof treatment, the amount of phosphorus grafted and the thermal degradation of the hemp fibers were evaluated through inductive coupled plasma (ICP) and thermogravimetric analysis (TGA), respectively. On the acoustic side, the impedance tube test results showed that the treatment can negatively impact the acoustic performance of hemp fiber samples, by the reduction of the sound absorption coefficient. To better understand the effects of treatments on the porous structure characteristics of the samples, parameters such as porosity, resistivity, tortuosity, etc. are determined and the acoustic absorption of the stacks is simulated using the JCAL modelling method.

Experimental studies of sensors based on fiber Bragg gratings embedded in the internal structure of composite plates

The main purpose of this article is to study the structural characteristics of carbon fiber samples printed on a 3D printer, including embedded sensors, during 3D printing, through numerical and experimental studies. There is a widespread tendency to replace metals with modern composite materials. Various methods can be used to measure the destruction of the composite structure. Fiber Bragg array sensors are known as intelligent localized and global structural condition prediction devices for all kinds of structural applications, especially those using composite materials. In this work, we created control plates by impregnating a selected number of layers of carbon fabric with epoxy resin. Fiber-optic Bragg sensors were additionally located between the layers of carbon fabric. In the course of experimental studies, a fiber Bragg grating sensor was embedded in the middle of the sample, and a second sensor was attached to the finished surface of the sample. We conducted environmental tests to examine the durability of the additively manufactured standard’s components and the impact of integrated sensors on the composite sample. We applied the concept of equations, known as conjugate modes, and used the transition matrix method to solve them numerically. The scientific novelty of the work is the development of a new method and technology for measuring spatial deformation in composite materials using fiber-optic Bragg gratings.

Thermal insulation materials based on eucalyptus bark fibres

The civil construction industry significantly contributes to global energy consumption, prompting a shift towards sustainable practices to mitigate environmental impacts throughout the building lifecycle. Traditional thermal insulation materials, such as polyurethane foam and mineral wool, are cost-effective but fail to meet environmental safety standards. In this context, plant-based materials have emerged as an eco-friendly alternative for thermal insulation, with agroforestry waste offering a sustainable raw material source. This waste is abundant and often improperly disposed of, thus utilizing it can reduce the environmental footprint of the agroforestry sector. This study focuses on developing thermal insulation plates using eucalyptus bark fibres, with some samples incorporating wheat straw. Various methods were employed: sodium silicate as a binder in some samples, while others used a binder-free method involving pulping bark in lye, and some included carbonised eucalyptus bark. The primary goal was to evaluate properties like thermal conductivity and moisture sorption. The electron microscope analysis provided insights into the microstructure of the fibres, explaining their insulation mechanisms. The thermal conductivity of the plates ranged from 0.036 to 0.059 W/(m·K) at a density of 80–220 kg/m3, influenced by the preparation processes (mechanical grinding, lye pulping, carbonization) and binder use. Eucalyptus bark fibre samples demonstrated low moisture sorption for plant-based materials, with 9.4–14.5 % at 60 % relative humidity and 21.6–38.5 % at 97 % relative humidity. Additionally, the samples showed high resistance to fungal growth when wet, suggesting good durability for thermal insulation applications. Overall, the study's results indicate that eucalyptus bark fibres hold significant promise as a sustainable raw material for producing thermal insulation, offering an environmentally friendly alternative to traditional materials while enhancing the durability and effectiveness of insulation in construction.

Time-dependent mechanical behavior analysis using Weibull models of cellulose hollow fiber membranes produced by green solvent

The mechanical behavior of sustainable (“green”), bio-based cellulose hollow fiber membranes (hereafter, hollow fiber) produced using green solvent, which is potential for desalination and solvent-resistant nanofiltration, can be evaluated either in dry or water-conditioned (wet) states. However, the effect of conditioning time on the mechanical behavior of hollow fibers has not been conclusive. In this work, an extensive evaluation involving an experimental campaign and rigorous application of statistical models for cellulose hollow fibers produced using green solvent (1-ethyl-3-methylimidazolium diethyl phosphate or [EMIM][DEP]) via a dry-jet spinning technique is reported. First, we evaluated the microstructures and separation performance (water permeation, solute rejection) of hollow fibers made of different cellulose concentrations (10–15 wt%) in both pristine and conditioned states. Then, the strength, stiffness, and ductility of hollow fiber samples of different gauge lengths (25 and 50 mm) were measured by a standard tensile test device. Here, the effect of conditioning time on mechanical properties was evaluated after the hollow fiber samples were water-immersed at different times (from 30 s to 2 months). The strength distribution of conditioned hollow fibers was modeled and analyzed using two-parameter and three-parameter Weibull models. Our results showed that the cellulose content of 15 wt% in the hollow fibers produced a denser microstructure, providing the lowest molecular weight cut-off (MWCO). The cellulose content and gauge length slightly modified the mechanical properties of hollow fibers when they were evaluated in pristine, dry conditions. The mechanical properties of hollow fibers were drastically reduced after 10 min of water immersion, beyond which their properties were stabilized. Weibull modeling of mechanical reliability showed that two- or three-parameter Weibull could estimate the failure probability of hollow fibers quite well. Nonetheless, the three-parameter Weibull is better than the two-parameter one in terms of accuracy in determining the threshold strength located at the “lower-end tail.” Our analysis provides a rigorous demonstration of Weibull modeling in evaluating the time-dependent mechanical behavior of ductile, cellulose-based hollow fiber membranes, which is essential to support the design and development of future hollow fiber membranes in desalination industries.

Simultaneous Measurement of Fiber-Matrix Interface Debonding and Tunneling Using a Dual-Vision Experimental Setup

BackgroundFiber-matrix debonding is a precursor for transverse cracking and several other types of damage in fiber composites. However, to date, there are limited experiment-based reports that study the fundamental mechanisms of fiber-matrix debonding.ObjectiveThis work aims to uncover the governing mechanisms of fiber-matrix interface debonding by full-field measurements supplemented by numerical simulations. In particular, the application of a dual-vision image-based characterization approach on single glass macro fiber samples is discussed and proven useful in understanding the in-plane and out-of-plane debonding characteristics at the fiber-matrix interface.MethodsFull-field strain and displacement measurements based on digital image correlation are performed on model single-fiber composites. The use of a dual-vision system allows strain measurements in the vicinity of the fiber-matrix interface, also allowing for the identification of critical strain and stress values corresponding to the initiation and propagation of debonding damage. The experimental data are used to calibrate an inverse identification approach that outputs the shape of the debonded interface along the fiber length.ResultsFull-field measurements allow for establishing correlations between local and global strain fields. Observation of debonding propagation along the fiber axis seems to be representative of the crack tunneling during the early stages of the failure process, i.e., when the crack tip is subjected to opening mode only.ConclusionsSide view measurements are useful as a first-order approximation of the debonding propagation velocity along the fiber axis but fail to provide accurate measurements for the debonding shape, esp. in areas where the crack is under a dominantly shear stress state. This issue can be resolved by full-field measurements coupled with computational simulations.

Lateral flow immunoassay device to detect staphylococcal enterotoxin B (SEB) in durian candy.

Staphylococcal enterotoxin B (SEB), a potent enterotoxin produced by Staphylococcus aureus, has been implicated in incidences of Staphylococcal food poisoning in the Philippines. The use of lateral flow immunoassay devices to detect this toxin in solid food samples, like durian candy, at the point of sampling is constrained by the requirement for sample purification (e.g. centrifugation). This problem is also true with the other applications of LFIA devices on food samples. To overcome this challenge, a lateral flow immunoassay (LFIA) device capable of detecting SEB in unpurified durian candy sample was developed in this study. A modified LFIA device was assembled with three layers of glass fiber pads functioning as sample pads instead of a conventional cellulose fiber pad. Unlike with the cellulose fiber pad, the glass fiber sample pads acted as filter and allowed the flow of a 1:5 dilution of durian candy. The LFIA device applied to spiked 1:5 diluted durian candy samples achieved a visual limit of detection of 5ng/mL for SEB, which is twofold lower than reported for previous LFIA devices designed to detect SEB in food samples.

Effect of Age and Sex on Medullation Types and Fiber Characteristics in Huacaya Alpacas

Background: Fiber is a distinctive attribute of the alpaca due to its softness qualities; it contains less grease and has a finer cuticle compared to sheep's wool. Therefore, the types of medullation were estimated: non-medullated fibers (NoMed), fragmented medulla (FragMed), discontinuous medulla (DiscMed), continuous medulla (ContMed) and strongly medullated fibers (StrMed), considering the age and sex of Huacaya breed alpacas (Vicugna pacos) under extensive management conditions in high Andean pastures. Methods: Six grams of fiber samples were collected from the mid-side region (located above the third last rib, halfway between the midline of the belly and the midline of the back) of 240 Huacaya alpacas from the district of Macusani, province of Carabaya, Puno, during the year 2022. They were then processed in the Fiber Laboratory of the Faculty of Textile Engineering and Garments at the National University of Juliaca using the FIBER EC V4.0 and FIBER MED V1.0 equipment. Result: The results obtained show that the percentage of non-medullated fibers decreases as the animal’s age increases (1 year= 75.60%, 2 years=69.43%, 3 years=69.05% and greater than 4 years=66.25%) (P≤0.05). The percentage of medullated fibers in animals of 1 year was 24.40%; 2 years, 30.57%; 3 years, 30.95% and greater than 4 years, 33.59% (P≤0.05). The mean fiber diameter in 1-year-old alpacas is 17.32 mm, 2 years=19.49 mm, 3 years = 19.91 mm and 4 years=20.10 mm (P≤0.05). The comfort factor in 1-year-old animals is 99.47%, 2 years with 98.02%, 3-year-olds with 97.01% and those older than 4 years with 96.45% (P≤0.05). Regarding the curvature index, values of 55.86 °/mm were obtained for 1-year-old animals, 53.43 °/mm for 2-year-olds, 53.99 °/mm for 3-year-olds and 52.23°/mm for those older than 4 years (P≤0.05). In conclusion, Huacaya alpacas exhibit low values for the percentage of strongly medullated fibers due to the age and sex of the animal, demonstrating very good fleece uniformity.

Investigating the Characteristics of Engineering Properties of Concrete Made from Hormak River Sediments and Sistan Reed Fibers

The purpose of this research is to investigate the characteristics of engineering properties of concrete made from Hormak river sediments and Sistan reed fibers.in order to investigate the effect of reed fibers on the engineering properties of concrete, the ratio of water to cement in all designs is constant and equal to 195 to 410 and experiments have been performed on 5 samples containing fibers and without fibers, before determining the optimal amount of each From the mentioned fibers to strengthen the concrete, the results of the necessary tests on fresh and hardened concrete were examined. In this study, in addition to mixing reed fibers with concrete, laboratory methods such as Compressive and tensile strength were used to confirm the accuracy of the results and the importance of selecting suitable materials at low cost in a short time before the concrete mixing project. The results show that the addition of reed fibers to concrete has increased the compressive strength in concrete samples Comparing the results of this test in ordinary concrete and fiber reinforced concrete, showed that this increase in strength at the ages of 7 to 28 days has increased only in samples S2 and S3 and is Similar to the typical concrete example isS1, While in S4 and S5 samples, which were samples of three-row fibers, there is a large decrease in compressive strength. Adding reed fibers initially increases the compressive and tensile strengths, but over time reduces these resistances. DOI: https://doi.org/10.52783/pst.789

Catalytic alcoholysis of fiberglass reinforced epoxy resin composites

The article presents the results of a study of alcoholysis of fiberglass reinforced epoxy resin composites obtained by vacuum infusion. To intensify alcoholysis, chlorides, nitrates and sulfates of cobalt (II) and copper (II) were introduced into the reaction medium in an amount of 5% of the mass of ethyl alcohol for each system. The efficiency of the system was assessed based on data from the analysis of mass change of composite samples during alcoholysis, thermogravimetric analysis and scanning electron microscopy. It was found that the presence of metal chlorides contributes to 5 times increase of the alcoholysis velocity. The residual strength of the recovered fiber samples obtained is at least 95%.

Reactive Condensation of Cr Vapor on Aluminosilicates Containing Alkaline Oxides

This study is part of a series with the objective of improving fundamental understanding of reactive condensation of Chromium (Cr) vapors, which are generated from Cr containing alloys used in many high-temperature (>500 °C) process environments and can form potentially problematic condensed hexavalent (Cr(VI)) species downstream. This study specifically focuses on the effects of alkaline oxide additives in aluminosilicate fibers on Cr condensation and speciation. Cr vapors were generated by flowing high-temperature (800 °C) air containing 3% water vapor over chromia (Cr2O3) powder, with aluminosilicate fiber samples positioned downstream where the temperature decreases (<500 °C). Total condensed Cr and ratios of oxidation states were measured using inductively coupled plasma optical emission spectroscopy (ICP-OES) and diphenyl carbazide (DPC) colorimetric/direct UV–vis spectrophotometric analyses. Results indicate presence of hexavalent Cr (Cr(VI)) species condensed on all samples investigated. The ratio of Cr(VI) to total Cr detected was consistently higher on aluminosilicate fiber samples containing alkaline oxide (CaO and MgO) additions. Computational thermodynamic equilibrium modelling corroborated experimental results showing stabilities of Ca and Mg chromate (Cr(VI)) compounds. Comparative results and analyses are presented and discussed to help inform mechanistic understanding and future related research and engineering efforts.

Study of the Electrophysical Properties of "Surkhon-104" Grade Cotton Fibers Alloyed with \(KMnO_4\)

In this article, the physical properties of cotton fibers sort of "Surkhon-104" with thermal treatment were studied. The main results of the research are as follows. The electrophysical and photoelectrical properties of cotton fibers doped with KMnO4 were studied. The research was carried out in the temperature range of 300-360 K and voltage in the range of 0-100 V. Temperature dependence of electrical conductivity of cotton fibers was studied. It was proved that the current flowing from all samples prepared as a research object obeys Ohm's law. It was found that the photoconductivity caused by ultraviolet and visible light in the cotton fibers sample is mainly related to the formation of inter-zone electron-hole pairs. it was found that the electrical conductivity increased significantly due to the photogeneration of charge carriers. The long-term relaxation of photoconductivity was determined, which is related to the localization of electrons to Et2=Ec-1,5 eV levels.

Regulatory networks of coresident subgenomes during rapid fiber cell elongation in upland cotton

Cotton, an intriguing plant species shaped by polyploidization, evolution, and domestication, holds particular interest due to the complex mechanisms governing fiber traits across its two subgenomes. However, the regulatory elements or transcriptional networks between subgenomes during fiber elongation remain to be fully clarified. Here, we analyzed 1462 cotton fiber samples to reconstruct the gene-expression regulatory networks that influence fiber cell elongation. Inter-subgenome expression quantitative trait loci (eQTLs) largely dictate gene transcription, with a notable tendency for the D subgenome to regulate A-subgenome eGenes. This regulation reveals synchronized homoeologous gene expression driven by co-localized eQTLs and divergent patterns that diminish genetic correlations, thus leading to preferential expression in the A and D subgenomes. Hotspot456 emerged as a key regulator of fiber initiation and elongation, and artificial selection of trans-eQTLs in hotspot456 that positively regulate KCS1 has facilitated cell elongation. Experiments designed to clarify the roles of trans-eQTLs in improved fiber breeding confirmed the inhibition of GhTOL9 by a specific trans-eQTL via GhWRKY28, which negatively affects fiber elongation. We propose a model in which the GhWRKY28–GhTOL9 module regulates this process through the ESCRT (endosomal sorting complex required for transport) pathway. This research significantly advances our understanding of cotton’s evolutionary and domestication processes and the intricate regulatory mechanisms that underlie significant plant traits.