Effect of treatment conditions on the morphology of date empty fruit bunch lignocellulosic fiber for biocomposite applications

Abstract

Listen

Translate article

The fiber of the empty date fruit is one of the waste products left after the date fruit is harvested from the date palm. Optimization of the treatment parameters as well as the economics of the treatment process are critical to the successful commercialization of the treatment of natural fibers for the production of biocomposites. Of the natural fiber treatment methods described in previous work, hot water and alkali treatments are the most cost-effective, which justified the choice of these treatment methods in this work. Here, date empty fruit bunch fibers were pulverized to a particle size of 0–500 µm and then treated with boiling water at 100 °C for 3 h or with sodium hydroxide at different concentrations (2, 5, 10%) for 3 h at room temperature with constant stirring at 800 rpm. To confirm the effect of temperature on the fiber treatment, another fiber sample was treated at a 5% concentration of sodium hydroxide solution at an elevated temperature of 80 °C for the same period and stirring condition. The untreated and treated DEFB fibers were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), X-ray fluorescence (XRF), and scanning electron microscopy (SEM). Chemical analysis of the fibers showed that DEFB fiber treated with 5% sodium hydroxide solution at room temperature had the highest cellulose content (52.0%), which was also confirmed by the XRD analysis. The DEFB fiber treated with boiling water exhibited higher thermal stability while the sodium hydroxide-treated fiber exhibited higher crystallinity index and cellulose content. Apparently, DEFB fiber treated with sodium hydroxide solution at 5% concentration for 3 h at room temperature for continuous stirring at 800 rpm offered the best properties. The treated fibers are expected to be viable reinforcement in the production of biocomposites with the goal of achieving energy efficiency. The developed materials could be used in industrial applications such as insulating building systems, automotive parts, and home furniture.