Fiber Optic Biosensor Research Articles

A PDA/AuNPs/PDANPs Sandwich Structure Modified Fiber Optic SPR Biosensor for High Precision and Specific Detection of Rabbit IgG

A PDA/AuNPs/PDANPs Sandwich Structure Modified Fiber Optic SPR Biosensor for High Precision and Specific Detection of Rabbit IgG

Optical Fiber Biosensors Based on Surface Plasmon Resonance Effect: A Review

Optical Fiber Biosensors Based on Surface Plasmon Resonance Effect: A Review

Chitosan-enhanced sensitivity of mercaptoundecanoic acid (MUA)- capped gold nanorod based localized surface plasmon resonance (LSPR) biosensor for detection of alpha-synuclein oligomer biomarker in parkinson's disease.

Alpha-synuclein oligomers play a crucial role in the early diagnosis of Parkinson's disease (PD). In this study, a mercaptoundecanoic acid (MUA)-capped gold nanorod (GNR)-coated and chitosan (CH)-immobilized fiber optic probe has shown considerable sensitivity of its detection. The proposed U-shaped fiber optic biosensor based on localized surface plasmon resonance (LSPR) was applied to detect α-syn oligomer (OA) biomarker. By analyzing OA concentrations, the biosensor achieved a limit of detection of (LOD) 11pM within the concentration range of 10-100pM and the sensitivity value was found as 502.69 Δλ/RIU. Upon analysis of the CV% (coefficient of variation) and accuracy/recovery values, it is revealed that the sensor successfully fulfilled the criteria for success, displaying accuracy/recovery values within the range of 80%-120% and CV% values below 20%. This sensor presents significant advantages, including high sensitivity, specificity, and ability to detect very low concentrations of OA. In conclusion, the suggested U-shaped fiber optic biosensor has the potential to be valuable in the early detection of PD from a clinical perspective.

Chitosan-coated iron(III) oxide nanoparticles and tungsten disulfide quantum dots-immobilized Fiber-based WaveFlex Biosensor for Staphylococcus Aureus bacterial detection in real food samples

The research proposes and investigates an extraordinarily sensitive, label-free WaveFlex biosensor utilizing optical fiber technology for the detection of Staphylococcus aureus (S. aureus), a common foodborne bacterium. The WaveFlex biosensor (plasmon Wave based Flexible optical fiber Biosensor) is based on a novel flexible tapered single-mode fiber structure, utilizing gold nanoparticles (AuNPs) to trigger the phenomenon of localized surface plasmon resonance (LSPR). Additionally, the sensitivity is further enhanced using chitosan-coated iron(III) oxide nanoparticles (Fe3O4–CS NPs) and tungsten disulfide quantum dots (WS2-QDs). The optical fiber surface is functionalized with antibodies to achieve specific detection of S. aureus. For S. aureus concentrations at 1 × 108 CFU/mL (colony-forming units per milliliter), the sensor's maximum sensitivity of 2.74 nm/lg (CFU/mL), and a detection limit (LOD) of 6.67 CFU/mL. This ultra-sensitive biosensor holds great potential for widespread applications in various fields, including disease detection, medical diagnostics, and food safety inspection.

Numerical Simulation of Early Detection of Cancer Cells Using a D-Shaped Fiber-Optic Biosensor Based on Surface Plasmon Resonance

Numerical Simulation of Early Detection of Cancer Cells Using a D-Shaped Fiber-Optic Biosensor Based on Surface Plasmon Resonance

Unpacking the packaged optical fiber bio-sensors: understanding the obstacle for biomedical application.

A biosensor is a promising alternative tool for the detection of clinically relevant analytes. Optical fiber as a transducer element in biosensors offers low cost, biocompatibility, and lack of electromagnetic interference. Moreover, due to the miniature size of optical fibers, they have the potential to be used in microfluidic chips and in vivo applications. The number of optical fiber biosensors are extensively growing: they have been developed to detect different analytes ranging from small molecules to whole cells. Yet the widespread applications of optical fiber biosensor have been hindered; one of the reasons is the lack of suitable packaging for their real-life application. In order to translate optical fiber biosensors into clinical practice, a proper embedding of biosensors into medical devices or portable chips is often required. A proper packaging approach is frequently as challenging as the sensor architecture itself. Therefore, this review aims to give an unpack different aspects of the integration of optical fiber biosensors into packaging platforms to bring them closer to actual clinical use. Particularly, the paper discusses how optical fiber sensors are integrated into flow cells, organized into microfluidic chips, inserted into catheters, or otherwise encased in medical devices to meet requirements of the prospective applications.

Nano-Photonic Crystal D-Shaped Fiber Devices for Label-Free Biosensing at the Attomolar Limit of Detection.

Maintaining both high sensitivity and large figure of merit (FoM) is crucial in regard to the performance of optical devices, particularly when they are intended for use as biosensors with extremely low limit of detection (LoD). Here, a stack of nano-assembled layers in the form of 1D photonic crystal, deposited on D-shaped single-mode fibers, is created to meet these criteria, resulting in the generation of Bloch surface wave resonances. The increase in the contrast between high and low refractive index (RI) nano-layers, along with the reduction of losses, enables not only to achieve high sensitivity, but also a narrowed resonance bandwidth, leading to a significant enhancement in the FoM. Preliminary testing for bulk RI sensitivity is carried out, and the effect of an additional nano-layer that mimics a biological layer where binding interactions occur is also considered. Finally, the biosensing capability is assessed by detecting immunoglobulin G in serum at very low concentrations, and a record LoD of 70 aM is achieved. An optical fiber biosensor that is capable of attaining extraordinarily low LoD in the attomolar range is not only a remarkable technical outcome, but can also be envisaged as a powerful tool for early diagnosis of diseases.

Advances in Plasmonic Photonic Crystal Fiber Biosensors: Exploring Innovative Materials for Bioimaging and Environmental Monitoring

AbstractThis review paper comprehensively analyzes recent advancements in optical fiber‐based biosensors, focusing on conventional fiber and photonic crystal structures. This paper overviews the significant applications of optical fiber biosensors, including bioimaging, quality analysis, food safety, and field environment monitoring, setting the stage for subsequent discussions. The primary objective of the review is to systematically evaluate recent literature concerning optical fiber‐based biosensors, emphasizing their sensitivities and resolutions. The second section explores integrating plasmonic materials such as graphene, TDMC, germanium, black phosphorus, and silicon within optical fiber biosensors, elucidating their roles in enhancing sensitivity and resolution in biosensing applications. A detailed examination of photonic crystal fibers (PCF) follows, categorizing them into internally and externally metal film‐coated biosensors, highlighting their distinct advantages and limitations. Comparative analyses in two tables delineate the performance and sensitivity of optical fiber‐based biosensors, mainly focusing on different coating strategies. The final section of the review discusses emerging trends and applications in optical fiber biosensing technologies, underscoring their potential to transform biomedical and environmental monitoring fields. By synthesizing recent developments and challenges, this review aims to offer researchers and practitioners a comprehensive understanding of optical fiber‐based biosensors, facilitating informed decision‐making and driving further advancements in the field.

An Efficient Bio-Receptor Layer Combined with a Plasmonic Plastic Optical Fiber Probe for Cortisol Detection in Saliva.

Cortisol is a clinically validated stress biomarker that takes part in many physiological and psychological functions related to the body's response to stress factors. In particular, it has emerged as a pivotal tool for understanding stress levels and overall well-being. Usually, in clinics, cortisol levels are monitored in blood or urine, but significant changes are also registered in sweat and saliva. In this work, a surface plasmon resonance probe based on a D-shaped plastic optical fiber was functionalized with a glucocorticoid receptor exploited as a highly efficient bioreceptor specific to cortisol. The developed plastic optical fiber biosensor was tested for cortisol detection in buffer and artificial saliva. The biosensor response showed very good selectivity towards other hormones and a detection limit of about 59 fM and 96 fM in phosphate saline buffer and artificial saliva, respectively. The obtained detection limit, with a rapid detection time (about 5 min) and a low-cost sensor system, paved the way for determining the cortisol concentration in saliva samples without any extraction process or sample pretreatment via a point-of-care test.

Detection of 17-[formula omitted]-Ethinylestradiol with Bio-Functionalized tapered optical fiber sensor

This paper presents the utilization of tapered optical fiber (TOF) biosensor for the detection of 17-α-ethinylestradiol (EE2), an estrogen hormone. TOF with a waist diameter of 12 μm was fabricated from single mode fiber using heat and pull method. The tapered area was used as the sensing interface between the evanescent waves propagating around the fiber due to its unique geometry and the attached molecules on the tapered surface. EE2 antibodies were used as biorecognition molecules towards the targeted analyte, EE2. When tested with different concentrations of EE2 within the range of 0.1 ng/L – 1 mg/L, the developed sensor attained a detection limit of 1 ng/L with a sensitivity value of 1.088 nm/ngL-1 within the operation range of 1 – 10 ng/L. The specificity of the sensor was validated by testing the developed sensor with estrone (E1) and no significant wavelength shift was observed. These findings highlight the potential of our approach for sensitive and selective detection of EE2.

Optical fiber LSPR sensor for SARS-CoV-2 N gene detection based on AuNRs

A novel SARS-CoV-2 N gene optical fiber biosensor based on ASO-coated gold nanorods is proposed in this work. A fiber probe prepared by AuNRs self-assembly was used to detect N gene by complementary base pairing method. The detected material was processed into AuNRs-ASO2-N gene coupler by cross-linking, and the pairing of N gene with ASO1 connected to AuNRs on the surface of the optical fiber formed the hydrogen bonding. The coupling of AuNRs resulted in a left shift of the peak position and a decrease in absorbance in the LSPR spectrum. In this manuscript, it is verified for the first time by simulation and experimental characterization that the coupling mode of AuNRs on the surface of the optical fiber is side by side, which leads to a left shift of the peak position of the LSPR absorption peak on the optical fiber. It is also proved that sandwich method is superior to the traditional method of changing the refractive index. The response time of the sensor is 10 min, and the detection limit is 1 pM, and the results show that the optical fiber sensor based on ASO-coated AuNRs has excellent RNA detection performance in artificial body fluids and is very suitable for RNA detection.

Four-core fiber-based multi-tapered WaveFlex biosensor for rapid detection of Vibrio parahaemolyticus using nanoparticles-enhanced probes

Infections caused by Vibrio parahaemolyticus (V. parahaemolyticus) can be highly fatal, making rapid and sensitive detection of them is essential. A new optical fiber biosensor based on localized surface plasmon resonance (LSPR) phenomenon is developed in this paper. A tapered-in-tapered fiber structure based on MFM is constructed by using four-core fiber (FCF) and multi-mode fiber (MMF) to qualitatively detect different concentrations of V. parahaemolyticus. The sensor successfully excites the LSPR phenomenon and increases the attachment point of biomolecules on the probe surface by fixing gold nanoparticles (AuNPs), molybdenum disulfide nanoparticles (MoS2-NPs) and cerium dioxide nanorods (CeO2-NRs). The functionalization of polyclonal antibodies on the probe surface can improve the specificity of the sensor. The linear detection range of the developed sensor was 1 × 100-1 × 107 CFU/mL, the sensitivity was 1.61 nm/[CFU/mL], and the detection limit was 0.14 CFU/mL. In addition, the reusability, reproducibility, stability, and selectivity of the sensor probe are also tested, which shows that the sensor has great application prospects.

Analysis of Tapered Fibre Optic Surface Plasmon Resonance Bio-Sensor Chip With Highly Perturbed Taper Profiles.

A numerical model based on the Transfer matrix method (TMM) is proposed for the first time to study the gold coated tapered fibre optic surface plasmon resonance (SPR) with eight different types of taper profiles namely linear, exponential-linear, Gaussian, quadratic, sinusoidal, error function type and highly perturbed taper profile so-called chirp type of profile. The performance in terms of sensitivity, full width at half maximum (FWHM), detection accuracy (D.A.), amplitude dip, and half power points are estimated with respect to tapering ratio and choices of taper profile. It is found that sensitivity increased almost linearly with the taper ratio of each taper choice for the account of the reduction of detection accuracy. It has been found that sensitivity is highest for the case of chirp taper profile and lowest for the case of quadratic taper profile at low taper ratio. In this study, the aqueous solution is considered for sensor development which is adulterated by biomolecules species like DNA, blood samples, etc.

Label-free optical fiber biosensor for the detection of CD44-expressing breast cancer cells

Increased level of CD44, transmembrane glycoprotein, is observed in several cancers such as breast, colorectal, head and neck, gastric, and ovarian cancer. Current methods for analyzing CD44 expressing cells are time-consuming, semi-quantitative, use labeled reagents for analysis or are not suitable for in situ analysis. Therefore exploring novel methods which are label-free and fast with the in situ detection capability for the quantification of these cells is of importance.Using optical fiber as a sensing element in biosensors offers low cost, high sensitivity, chemical inertness, and immunity to electromagnetic interference, and possibility of being used in in situ applications. This study reports the first label-free optical fiber biosensor for detection of CD44-expressing cancer cells. A fiber-optic ball resonator (BR) sensor was fabricated and then functionalized with CD44 antibodies. Different concentrations of the cells were incubated with the biosensor to measure the reflected light using optical backscatter reflectometer. The biosensor was able to detect cancer cells with a limit of detection of 335 cells/mL. The presence of the cells on the sensor surface was demonstrated by fluorescent and scanning electron microscope analysis. The work is the first proof-of-concept biosensor based on optical fibers for CD44 cancer cells and acts as a promising tool for in situ detection of cancer cells.

Ammonia-trapping multilayer polymer urease film amplifier coated surface plasmon resonance sensor for ultra-sensitive urea detection

In this paper, we have developed a new urea signal amplification technology based on a multilayer urease polymer film self-assembly structure for the first time, enabling the realization of ultra-accurate urea optical detection. We demonstrate the effectiveness of this technique based on surface plasmon resonance (SPR) platform. When the urea signal amplifier is combined with SPR sensors, multilayer urease polymer film contacts with urea molecules, the urea molecules are oxidated into NH3 and CO2, causing the pH increase, which weakens the electrostatic interaction between different polymer layers and induces the RI reduction of the multilayer urease film, thereby causing the shift of the SPR spectrum. Experiment results confirm that urea sensitivity has been improved 12-fold, and the limit of detection (LOD) has been optimized to less than 10−3 mmol/L. Furthermore, the anti-interference has been improved 22.8-fold and is kept even the interference signal strength increases by 100 times. Moreover, multilayered urease polymer leads to the increase of urease on the sensor surface, thus expanding the detection range of urea by 3.5 times. This provides a new way to solve the contradiction between high sensitivity and large measurement range of optical fiber biosensor. Importantly, the concept of using enzyme-loaded polymer films for signal amplification can be adapted for the detection of various other biomolecules by replacing the enzyme with a specific recognition element for the target molecule. This opens doors for developing highly sensitive and specific biosensors for diverse applications in healthcare, environmental monitoring, and food safety.

Structure Design and Sensitivity Optimization of Optical Fiber Biosensor Based Au Nano Column - TiO2 Heterostructure

An investigation on a single mode optical fiber sensor-based surface plasmon resonance was carried out in this work. A titanium dioxide (TiO2) coated gold Nano-column (Au) are deposited on the proposed sensor and theoretically analyzed using COMSOL Muliphysics software 5.3. Presence of TiO2 over the Au Nano-column can improve the sensitivity of the sensor and tune the resonance peak of transmission spectrum from visible region to near-infrared region. The size effect of TiO2 nanoparticles on the sensor performance is studied. The optimum parameters of such as Au size and separation width between the Au Nano-column have been selected to enhance the performance of the sensor. In comparison, the sensor with TiO2 over Au Nano-column is significantly improve the sensitivity and develop the sensor performance. The greater sensitivity of 5243.76 nm/RIU (refractive index unit) is obtained of sensor with TiO2 over Au Nano-column when the external refractive index of analyte is varying from 1.33 to 1.39, while sensitivity of the sensor coated with Au Nano-column is obtained to be 4643.17 nm/RIU for the same analyte range. Above results can be used to predict the best parameters values of the sensor that corresponding to the greatest sensitivities of detection and finally opening new study in the field of gas sensors. HIGHLIGHTS Optical fiber biosensors are a devices that use to measure the analyte by using the optical field Optical fiber biosensors have a high detection speed and low-cost, compared to congenital sensors The optical fiber sensors based SPR are widely used for biosensor applications The novelty in this research is the fabricate of optical fiber sensor coated with TiO2 over Au Nano-column based SPR foe gas detection GRAPHICAL ABSTRACT

Application of fiber loop ringdown spectroscopy technique for a new approach to beta-amyloid monitoring for Alzheimer Disease’s early detection

A novel fiber optic biosensor was purposed for a new approach to monitor amyloid beta protein fragment 1–42 (Aβ42) for Alzheimer’s Disease (AD) early detection. The sensor was fabricated by etching a part of fiber from single mode fiber loop in pure hydrofluoric acid solution and utilized as a Local Optical Refractometer (LOR) to monitor the change Aβ42 concentration in Artificial Cerebrospinal Fluid (ACSF). The Fiber Loop Ringdown Spectroscopy (FLRDS) technique is an ultra-sensitive measurement technique with low-cost, high sensitivity, real-time measurement, continuous measurement and portability features that was utilized with a fiber optic sensor for the first time for the detection of a biological signature in an ACSF environment. Here, the measurement is based on the total optical loss detection when specially fabricated sensor heads were immersed into ACSF solutions with and without different concentrations of Aβ42 biomarkers since the bulk refractive index change was performed. Baseline stability and the reference ring down times of the sensor head were measured in the air as 0.87% and 441.6 μs ± 3.9 μs, respectively. Afterward, the total optical loss of the system was measured when the sensor head was immersed in deionized water, ACSF solution, and ACSF solutions with Aβ42 in different concentrations. The lowest Aβ42 concentration of 2 ppm was detected by LOR. Results showed that LOR fabricated by single-mode fibers for FLRDS system design are promising candidates to be utilized as fiber optic biosensors after sensor head modification and have a high potential for early detection applications of not only AD but possibly also several fatal diseases such as diabetes and cancer.

Polymeric optical fiber biosensor with PAMAM dendrimer-based surface modification and PlGF detection for pre-eclampsia diagnosis

Pre-eclampsia (PE) is a life-threatening complication that occurs during pregnancy, affecting a large number of pregnant women and newborns worldwide. Rapid, on-site and affordable screening of PE at an early stage is necessary to ensure timely treatment and minimize both maternal and neonatal morbidity and mortality rates. Placental growth factor (PlGF) is an angiogenic blood biomarker used for PE diagnosis. Herein, we report the plasmonic fiber optic absorbance biosensor (P-FAB) strategy for detecting PlGF at femtomolar concentration using polymethyl methacrylate (PMMA) based U-bent polymeric optical fiber (POF) sensor probes. A novel poly(amidoamine) (PAMAM) dendrimer based PMMA surface modification is established to obtain a greater immobilization of the bioreceptors compared to a linear molecule like hexamethylenediamine (HMDA). Plasmonic sandwich immunoassay was realized by immobilizing the mouse anti-PlGF (3H1) on the U-bent POF sensor probe surface and gold nanoparticles (AuNP) labels conjugated with mouse anti-PlGF (6H9). The POF sensor probes could measure PlGF within 30 min using the P-FAB strategy. The limit-of-detection (LoD) was found to be 0.19 pg/mL and 0.57 pg/mL in phosphate-buffered saline and 10× diluted serum, respectively. The clinical sample testing, with eleven positive and eleven negative preeclamptic pregnancy samples, successfully confirmed the accuracy, reliability, specificity, and sensitivity of the P-FAB based POF sensor platform, thereby paving the way for cost-effective technology for PlGF detection and its potential for pre-eclampsia diagnosis.

Detection of NT-proBNP Using Optical Fiber Back-Reflection Plasmonic Biosensors.

Heart failure (HF) is a clinical entity included in cardiovascular diseases affecting millions of people worldwide, being a leading cause of hospitalization of older adults, and therefore imposing a substantial economic burden on healthcare systems. HF is characterized by dyspnea, fatigue, and edema associated with elevated blood levels of natriuretic peptides, such as N Terminal pro-B-type Natriuretic Peptide (NT-proBNP), for which there is a high demand for point of care testing (POCT) devices. Optical fiber (OF) biosensors offer a promising solution, capable of real-time detection, quantification, and monitoring of NT-proBNP concentrations in serum, saliva, or urine. In this study, immunosensors based on plasmonic uncladded OF tips were developed using OF with different core diameters (200 and 600 µm). The tips were characterized to bulk refractive index (RI), anddetection tests were conducted with NT-proBNP concentrations varying from 0.01 to 100 ng/mL. The 200 µm sensors showed an average total variation of 3.6 ± 2.5 mRIU, an average sensitivity of 50.5 mRIU/ng·mL-1, and a limit of detection (LOD) of 0.15 ng/mL, while the 600 µm sensors had a response of 6.1 ± 4.2 mRIU, a sensitivity of 102.8 mRIU/ng·mL-1, and an LOD of 0.11 ng/mL. Control tests were performed using interferents such as uric acid, glucose, and creatinine. The results show the potential of these sensors for their use in biological fluids.

Label-free and selective heparin detection by surface functionalized fiber Fabry-Perot interferometer biosensor

Heparin (Hep) is the most commonly used anticoagulant drug in clinical settings, and precise dosage control is crucial. To enable rapid and accurate quantification of Hep concentration in clinical practice, a label-free and selective fiber-optic Fabry-Perot interferometric (FPI) biosensor detection method based on graphene oxide (GO) was proposed. This method utilizes protamine (PRTM) sulfate as the modified layer and achieves Hep detection through layer-by-layer (LBL) assembly. In this study, we developed a label-free and selective fiber optic FPI biosensor for the detection of Hep using GO. The GO on the surface layer of the fiber optic FPI biosensor was treated with specific functionalization, it enables specific interaction with Hep. The binding of Hep to the functionalized surface induces a change in the luminal light signal, which can be monitored within the cavity for rapid and accurate detection of Hep. The results demonstrate that this biosensor exhibits good sensitivity, with a value of 10.82 nm/mM in the low-concentration control group, and an average limit of detection (LOD) calculated as 31μg/mL in the low-concentration group. This study presents a label-free, selective and efficient method for biomedical science testing that holds great potential for widespread application in clinical medicine.