Fence Height Research Articles

Evaluation of the effectiveness of an expressway sand protection system in a gobi region—case study of the Ceke–Ejina expressway, Ejina banner, China

Sand protection systems are widely used to shelter roads from blowing sand. Therefore, it's very important to evaluate their effectiveness. To provide some insights, we used field investigations, measurements of accumulated sand, work logs from sand-removal workers, and wind speed data to analyze a system's performance using China's Ceke–Ejina expressway as a case study. Our results demonstrated that the critical wind speed required to deposit sand on the expressway was 8.6 m s-1 (cumulative frequency 12.1%) before implementing the sand protection system. After implementing the system, the critical wind speed required to deposit sand on the road increased to 14.8 m s-1 (0.3%). However, the critical wind speed decreased to 11.1 m s-1 (3.5%) the next year. Additional work, such as digging ditches, increasing the fence height, and planting shrubs, would help the sand protection system retain its function. Nonetheless, the system continued to function well. The volume of sand removed decreased from ca. 10,000 m3 in 2015 to ca. 100 m3 in 2020. Our results quantify the effectiveness of the sand protection system and reveal how its effectiveness decreases over time. They therefore provide an empirical basis for improving the design and maintenance of sand protection systems.

The windbreak effects of organic fence made from branches of Salix psammophila in Hobq Desert

AbstractSalix sand barriers have been widely used in arid and semi‐arid regions of northern China as an environmentally friendly approach to control wind erosion. However, the inherent variability in length and thickness of Salix branches complicates achieving the desired fence porosity, typically resulting in an error of approximately 10% or more. This defect affects the fence's wind protection, thereby limiting their broader application. To address these challenges, we conducted a field experiment in the Hobq Desert, where we established Salix fences with porosities of 23%, 37%, and 44%, and measured the airflow velocities around these fences. The results indicated that the fence with 37% porosity exhibited the most effective sheltering effect, providing a protection distance up to 7.14 times of the fence height. A total of 44% porosity fences are also reasonably effective for practical purposes. On the other end of the spectrum, fences with 23% porosity demonstrated a better sediment interception than its high porosity peers, achieving an interception rate of 81.46%. Therefore, we conclude that organic fences made from Salix branches can serve as efficient windbreaks. Our findings provide foundational data for the application of organic fences in arid and semi‐arid regions of northern China, and potentially similar environments globally.

Numerical simulation of deformation hysteresis effect of the bristles of brush seals

Because of their good sealing performance, brush seals are used widely in turbomachinery as alternatives to traditional labyrinth seals. However, obstructed by friction, the flexible bristles cannot recover fully after deformation, resulting in a hysteresis effect and decreased sealing performance. In the present study, a three-dimensional multi-row bristle model is established that considers the friction between the neighbouring bristles and back plate. Then the deformation and recovery of the bristles during the radial reciprocating offset of the rotor in the presence of a pressure difference are studied. To evaluate the hysteresis effect, analysis is directed at the unrecovered bristle deformation in the radial direction affected by bristle diameter, bristle lay angle, fence height and width of pressure relief chamber. The results show that the larger the bristle diameter and fence height, the weaker the hysteresis effect and the larger the bristle lay angle, the stronger the hysteresis effect. With increasing width of the pressure relief chamber, the hysteresis effect weakens and then strengthens, meaning that the pressure relief chamber has an optimal axial width that departure from enhances the hysteresis effect. The present results offer a reference for selecting the structural parameters of brush seals in engineering design.

Analysis of Tokyo 2020 Olympic modern pentathlon equestrian jumping results

Modern Pentathlon (MP) includes an equestrian Jumping discipline, with horses drawn blindly by unfamiliar riders. At the Tokyo 2020 Olympic Summer Games, concerns regarding inadequate horsemanship generated adverse publicity for MP. Conventional stadium Jumping in Tokyo provided an opportunity for comparison of the two closest Olympic equestrian Jumping disciplines. The objectives of this study were to complete an objective analysis of the Tokyo MP riding phases, and to test the hypothesis that MP riding faults in women's and men's Tokyo competitions combined were more frequent than in the Individual Jumping Qualifier (JQ). Types of faults for Tokyo MP (n = 71 riders) and JQ (n = 73 riders) were tabulated from published official results and detailed observation of online videos of each competition. Fault distributions were compared using Chi-square analysis (significance at P < .05). MP riders had more jumping faults (15.4 %) than JQ (7.8 %, P < .0001). Both MP and JQ riders had more faults at oxers (17.1 %, P < .0001 and 9.7 %, P = .0171, respectively) than verticals (14.5 % and 6.2 %). JQ (9.8 %, P = .0093) but not MP (15.7 %, p = .5166) riders had more faults in the second half of the course compared to the first half (5.7 % and 15.0 %, respectively). Double clear rounds (no jumping or time faults) were 4.9 times more likely in JQ (34.2 %) than in MP (6.9 %: P < .0001). Proposed solutions to decrease MP fault frequency include lower maximum fence heights, fewer jumping efforts, and a more liberal re-ride policy.

Early life jumping traits: Are they good proxies for success in show jumping competitions in Belgian warmblood horses?

The main goal of the Belgian Warmblood horse studbook (BWP) is to breed successful competition horses, with emphasis on show jumping. However, competition results are only available later in life and competition traits are lowly heritable. Hence, the use of phenotypes that record performance-related traits at an early life stage could help increase genetic progress. In this study, we evaluated the potential of eleven linear scored early life jumping traits assessed during jumping in freedom (2-5 years old) or under the saddle (4-6 years old) as proxies for later success in show jumping competitions. To this end, we estimated their heritabilities and genetic correlations with the competition trait, adjusted fence height, by using 2170 free jumping records, 1588 jumping under saddle records, 674,527 show jumping competition records and almost 81,000 informative horses in the pedigree. As participation of young horses in these contests is on a voluntary basis, a pre-selection most probably exists. To verify this hypothesis, we investigated the association between participation to young horse contests and participation to show jumping competitions later on (called here start status phenotype). We also estimated heritabilities for "start status in free jumping contest", "start status in jumping under saddle contest" and "start status in free jumping or jumping under saddle contest" by fitting threshold models. Furthermore, we calculated genetic correlations between these traits and adjusted fence height and calculated the correlations between EBVs for start status in young horse contests and EBVs for success in competitions. Estimated heritabilities of early life jumping traits ranged between 0.05 and 0.30. Their genetic correlations with adjusted fence height were moderate to high (rg = 0.37-0.63). Relatively more horses that participated in young horse contests competed later on compared to horses that did not participate in young horse contests (p-value < 0.001). They were also significantly more successful in show jumping competitions. Furthermore, start status in young horse contests was moderately heritable in BWP horses (h2 = 0.56-0.65) and moderately to highly correlated with later success in competitions (rg = 0.30-0.77). Hence, we showed that ELJ traits are good proxies for later success in competitions and that a pre-selection of horses occurs in young horse contests. It is suggested to stimulate participation to young horse contests to achieve a more representative sample of the population. Early life jumping traits can therefore optimize the genetic progress for show jumping performance.

Numerical Simulations and Wind Tunnel Experiments to Optimize the Parameters of the Second Sand Fence and Prevent Sand Accumulation on the Subgrade of a Desert Railway

Wind-blown sand significantly affects the construction and safe operation of railways in desert regions. The performance of a wind-blown-sand prevention system with different structural parameters and sand accumulation around the railway subgrade was analyzed in this study. The optimum porosity and opening type of a second sand fence were assessed via wind tunnel experiments and numerical simulations. The results showed that the subgrade intercepted some sand and reduced sand accumulation on the track surface, and the interception rate was 29.70%. The wind-blown-sand prevention efficiency of the subgrade was 88.55%. Moreover, the lower the porosity of the second sand fence, the lower the sand velocity on the windward side and the higher the sand accumulation. The porosities of the first and second sand fences should be 30% and 20%, respectively, to maximize the sand accumulation between the fences. When the second sand fence had horizontal openings, most of the sand accumulated near the surface (within 20 cm) on the leeward side and on the straw checkerboard barrier, and the maximum wind-blown-sand prevention efficiency was 97.16%. When the second sand fence had vertical openings, the efficiency was 93.60%, and the sand accumulation on the leeward side and the straw checkerboard barrier was reduced. As the fence height increased (above 20 cm), the sand prevention efficiency of both approaches increased. The research results can provide guidance for the formulation and optimization of sand prevention measures for railways and highways in deserts.

Equity in Global Health Research.

Equity in Global Health Research.

Adjusted fence height: an improved phenotype for the genetic evaluation of show jumping performance in Warmblood horses

BackgroundShow jumping is one of the most popular disciplines in the horse sector, which makes success in show jumping competitions an important breeding goal for many studbooks. Therefore, the genetic evaluation of show jumping performance is of major interest and this is the case for two Belgian Warmblood studbooks: the Belgian Warmblood horse and Zangersheide. In this study, first an improved phenotype for show jumping performance was developed, i.e. adjusted fence height based on a new non-arbitrary method to scale ranking and competition level, which are two major components of success in competitions. Second, we assessed the importance of including a rider effect in genetic models for show jumping performance, this effect being under debate in sport horse breeding. Third, genetic models based on elementary performances and one model based on a summarized performance were compared in terms of model fit, heritabilities and the stability of estimated breeding values to define the most suitable one for the genetic evaluation of show jumping performance.ResultsIn this study, more than 600,000 Belgian competition records and almost 81,000 horses were used. Genetic evaluations were developed based on elementary performances (Blom-transformed ranking and adjusted fence height) and on a summarized performance (highest level achieved). Estimated heritabilities of Blom-transformed ranking, adjusted fence height and highest level achieved were 0.09, 0.12 and 0.39, respectively. Including a rider effect improved the models for genetic evaluations. Estimated genetic correlations between the studied models were moderate to high (rg = 0.60–0.99). With the best fit model, the accuracy of the estimated breeding value (EBV) for adjusted fence height reached 0.70 for a larger number of stallions and for stallions that tended to be younger.ConclusionsWe recommend breeders to implement this new phenotype ‘adjusted fence height’ in breeding programs. It is moderately to highly correlated with Blom-transformed ranking and highest level achieved, a proxy for lifetime success, and is available for selection candidates from an early age onwards.

Efficacy of permanent wildlife fences as barriers to amphibian movement

To mitigate habitat fragmentation and roadkill, roads are increasingly equipped with wildlife fences and underpasses. However, the effectiveness of such fences in preventing road access for amphibians has not been tested under controlled conditions. In 2019 and 2020, we tested the efficacy of full panel fences of differing material, height, and shape (presence/absence of an overhang), to prevent road access for adult and juvenile amphibians. We selected five species according to locomotion mode: Natterjack toads (runners), European green toads (short-distance jumpers), agile frogs (proficient jumpers), American tree frogs (proficient climbers) and smooth newts (climbers). We found that Natterjack and green toads were unable to cross a concrete fence with a height of 13 and 24 cm, respectively. Addition of a 10 cm overhang reduced the height required to prevent crossing further to 10 and 17 cm, respectively. The ability of these less agile species to cross a certain fence height depended on body length. By contrast, jumping agile frogs and climbing tree frogs were not stopped by the greatest fence height tested (40 cm). However, addition of the overhang stopped the climbing tree frogs at a concrete fence height of 35 cm. An alternative metal fence (with overhang) was tested with some species and performed similar to the concrete fence (with overhang). Finally, the greatest concrete fence height passed by climbing juveniles was 20 cm (smooth newts). Hence, to stop amphibians from road crossing, we recommend the construction of durable (concrete or galvanized metal) and well-maintained fences with a minimum height of 40 cm with a 10 cm overhang.

A numerical investigation exploring the potential role of porous fencing in reducing firebrand impingement on homes

Firebrand impingement is a leading cause of home ignitions from wildland fire. The use of porous fencing has recently been proposed as a potential method for mitigating firebrand impingement on homes. A porous fence can act as a windbreak to alter the near-surface flow and induce particle deposition, as demonstrated in other applications, such as the use of snow fences to protect roadways from drifting snow. Conservation advocates have proposed the use of fire-resistant vegetation to act as a fence upwind of homes or subdivisions. Porous fences could also be constructed from fire-resistant materials such as metal, rock, or composites. This numerical investigation of the effectiveness of porous fencing to reduce firebrand impingement on homes conducted a series of experiments to explore the effect of porous fencing on the near-surface flow field and firebrand transport downwind of the fence. We also evaluated the sensitivity of the results to various fence, flow, and firebrand properties, including fence height, fence porosity, wind speed, firebrand source location, and firebrand size. To our knowledge, this is the first study to investigate the concept of using a fence to induce firebrand deposition upwind of homes. Our results showed that porous fencing can reduce firebrand impingement on homes by up to 35% under certain conditions; however, fencing can also increase impingement on homes. The mitigation effectiveness depended on the proximity of the firebrand source, distance between the fence and home as a function of fence height, wind speed, and firebrand size. A series of key findings and recommendations are provided.

Advancing fence datasets: Comparing approaches to map fence locations and specifications in southwest Montana

Fencing is a major anthropogenic feature affecting wildlife distributions and movements, but its impacts are difficult to quantify due to a widespread lack of spatial data. We created a fence model and compared outputs to a fence mapping approach using satellite imagery in two counties in southwest Montana, USA to advance fence data development for use in research and management. The model incorporated road, land cover, ownership, and grazing boundary spatial layers to predict fence locations. We validated the model using data collected on randomized road transects (n = 330). The model predicted ~34,700 km of fences with a mean fence density of 0.93 km/km2 and a maximum density of 14.9 km/km2. We also digitized fences using Google Earth Pro in a random subset of our study area in survey townships (n = 50). The Google Earth approach showed greater agreement (K = 0.76) with known samples than the fence model (K = 0.56) yet was unable to map fences in forests and was significantly more time intensive. We also compared fence attributes by land ownership and land cover variables to assess factors that may influence fence specifications (e.g., wire heights) and types (e.g., number of barbed wires). Private land fences had bottom wires that were closer to the ground and top wires higher from the ground when compared to fences on public lands, with sample means at ~22 cm and ~26 cm, and ~115 cm and ~111 cm, respectively. Both bottom wire means were well below recommended heights for ungulates navigating underneath fencing (≥ 46 cm), while top wire means were closer to the 107 cm maximum fence height recommendation. We found that both fence type and land ownership were correlated (χ2 = 45.52, df = 5, p = 0.001) as well as fence type and land cover type (χ2 = 140.73, df = 15, p = 0.001). We provide tools for estimating fence locations, and our novel fence type assessment demonstrates an opportunity for updated policy to encourage the adoption of “wildlife-friendlier” fencing standards to facilitate wildlife movement in the western U.S. while supporting rural livelihoods.

Numerical Analysis of Leakage Performance of Brush Seal Based on a 2-D Tube Bank Model and Porous Medium Model Considering the Effect of Compressible Gas

This paper presented a formula for calculating the resistance coefficient of porous medium model of brush seals considering the effect of gas compressibility. Firstly, the 2-D tube bank model is used to calculate the axial resistance coefficient of brush seals. Secondly, the feasibility of the method is validated according to the existing experiment results. The validation results show that this formula is effective for brush seals. Lastly, the pressure distribution and leakage rate of the test brush seal are analyzed. With the presented porous medium model, the pressure drop through the bristle is computed, and the effect of groove of the back plate is addressed. The pressure drop is mainly concentrated on the downstream side of the bristle pack. The groove in the back plate can keep the pressure balance of the bristles back, causing the recovering of the pressure in the last row of bristles. The leakage rate of porous medium model is higher than the 2-d tube bank model, because the 2-D tube bank model only considers the leakage rate of the zone of the fence height. The rotation speed has a little effect on the reduction of the leakage rate.

Vertical and torsional vibrations before the collapse of the Tacoma Narrows Bridge in 1940

We perform a three-dimensional direct numerical simulation of flow over the Tacoma Narrows Bridge to understand the vertical and torsional vibrations that occurred before its collapse in 1940. Real-scale structural parameters of the bridge are used for the simulation. The Reynolds number based on the free-stream velocity and height of the deck fence is lower ( ${Re}=10\ 000$ ) than the actual one on the day of its collapse ( ${Re}=3.06 \times 10^{6}$ ), but the magnitude of a fluid property is modified to provide the real-scale aerodynamic force and moment on the deck. The vertical and torsional vibrations are simulated through two-way coupling of the fluid flow and structural motion. The vertical vibration occurs from the frequency lock-in with the vortex shedding, and its wavelength and frequency agree well with the recorded data in 1940. After saturation of the vertical vibration, a torsional vibration resulting from the aeroelastic fluttering grows exponentially in time, with its wavelength and frequency in excellent agreement with the recorded data of the incident. The critical flutter wind speed for the growth of torsional vibration is obtained as $3.56 &lt; U_c / (f_{nat} B) \le 4$ , where $U_{c}$ is the critical flutter wind speed, $f_{nat}$ is the natural frequency of the torsional vibration and $B$ is the deck width. Finally, apart from the actual vibration process in 1940, we perform more numerical simulations to investigate the roles of the free-stream velocity and vertical vibration in the growth of the torsional vibration.

Color gamut change by optical crosstalk in high-resolution organic light-emitting diode microdisplays.

Herein, the color gamut change by optical crosstalk between sub-pixels in high-resolution full-color organic light-emitting diode (OLED) microdisplays was numerically investigated. The color gamut of the OLED microdisplay decreased dramatically as the pixel density of the panel increased from 100 pixels per inch (PPI) to 3000 PPI. In addition, the increase in thickness of the passivation layer between the bottom electrode and the top color filter results in a decrease in the color gamut. We also calculated the color gamut change depending on the pixel structures in the practical OLED microdisplay panel, which had an aspect ratio of 32:9 and a pixel density of 2,490 PPI. The fence angle and height, refractive index of the passivation layer, black matrix width, and white OLED device structure affect the color gamut of the OLED microdisplay panel because of the optical crosstalk effect.

A Nature-Based Solution for Coastal Protection: Wind Tunnel Investigations on the Influence of Sand-Trapping Fences on Sediment Accretion

Sand-trapping fences are a frequently used nature-based solution in coastal protection for initiating and facilitating coastal dune toe growth. However, only a few researchers have evaluated the trap efficiency of sand-trapping fences based on their porosity and height. Subsequently, the design of their properties has only been based on empirical knowledge, to date. However, for restoring and maintaining coastal beach–dune systems, exact knowledge of sand-trapping fence’s optimal properties is essential. Thus, we conducted physical model tests focusing on the most crucial parameters: fence height (h = 40, 80, 120 mm) and fence porosity (ε = 22.6, 41.6, and 56.5%). These tests were conducted in an indoor subsonic, blowing-sand wind tunnel equipped with a moveable sediment bed (d50 ∼ 212 µm). The experimental mean wind velocities were u1 = 6.1 m/s, u2 = 7.4 m/s, and u3 = 9.3 m/s. We used a hot-wire anemometer to measure the flow fields, a vertical mesh sand trap to determine the sediment fluxes, and a 2D laser scanner to record the sediment accretion around the sand-trapping fences over time. The study results provide substantial theoretical and practical support for the installation and configuration of trapping fences and improving their design. The fence porosity, for example, should be chosen depending on the installation purpose. While denser fence porosities (ε1 = 22.6% and ε2 = 41.6%) can be used for initiating and facilitating the dune toe growth, fences with higher porosity (ε3 = 56.5%) are more suitable to favor the sediment accretion between foredunes and white dunes as they allow further dune growth downwind.

Analysis of the influence of snow fences on snow redistribution under snow-drifting in railway cuttings

In order to reduce the amount of snow deposited in railway cuttings under the action of snow-drifting, this paper arranged three forms of snow fence and related wind and snow flow field monitoring equipment in the field test area, and the effect of different structural parameters of snow fences on snow redistribution was studied by wind tunnel test and numerical simulation. The results showed that there was an approximately 20-meter-long erosion area on the top of the slope, and the snow fences could deposit snow particles on both sides of the fences which reduced erosion on the top of the cutting slope. Compared with Single-3 and Single-5 fences, the amounts of deposited snow were increased by about 50% and 20%, respectively, under the action of Double-3 fences. When the snow was deposited in the cutting, it tended to accumulate on the leeward side of the snow deposition platform; and the snow amount on the subgrade surface rapidly increased when the snow platform reaches its carrying limit. The bottom gap of the snow fence accelerates the flow field near the ground and the snow particles extend to the leeward side, the height of the snow fence will affect the snow deposition range on the leeward side of the fence, and the porosity will affect the snow accumulation pattern of both sides of the fence.

Impacts of African savannah elephants (Loxodonta africana) on tall trees and their recovery within a small, fenced reserve in South Africa

AbstractAfrican savannah elephants (Loxodonta africana) can have detrimental impacts on trees; studies exploring elephant impact within small, fenced reserves, have lacked focus in determining elephant high‐use areas, the direct effect of fence line and tree recovery. The aim of this study is to assess whether elephants cause significant impact on trees in the small‐fenced Karongwe Private Game Reserve (KPGR) and to determine the levels of tree recovery. Trees ≥5 m in height were surveyed (n = 634 trees). Elephant location data were used to identify high‐ and low‐use areas. Five species accounted for 80% of the records; these were used for further analysis. Trees in high‐use areas were significantly less likely to show signs of debarking and push over. Tall trees were significantly more likely to be impacted by elephants, being associated with heightened risks of debarking and branches being broken but lower risks of being pushed over. Trees close to the fence line were not more impacted than trees near the centre of the reserve. The level of use, distance to the fence and tree height were not significant predictors of tree recovery indicators. Future mitigation efforts should focus on trees with high levels of impact and low levels of recovery.

Sand Trapping Fences as a Nature-Based Solution for Coastal Protection: An International Review with a Focus on Installations in Germany

Sand trapping fences are a widely used nature-based solution to initiate dune toe growth along sandy shorelines for coastal protection. At present, the construction of sand trapping fences is based on empirical knowledge, since only a few scientific studies investigating their efficiency exist. However, the restoration and maintenance of beach-dune systems along the coast requires knowledge of the interaction between the beach-dune system and the sand trapping fences to provide guidance for coastal managers on how and where to install the fences. First, this review gives an overview of the typical aerodynamic and morphodynamic conditions around a single porous fence and the influence of various fence height and porosity values to understand the physical processes during dune establishment. Second, different approaches for evaluating the efficiency of sand trapping fences to trap sediment are described. This review then highlights significant differences between sand trapping fence configurations, nationally as well as internationally, regarding the arrangement, the materials used, and the height and porosity. In summary, it is crucial to enable an intensive exchange among the respective coastal authorities in order to create uniform or transferable guidelines taking local conditions into account, and thus work collaboratively on the idea of sand trapping fences as a nature-based solution in coastal areas worldwide.

A Numerical Experiment on the Effect of Stone Fences on the Wind Stream Formation in Vernacular Architecture of Jeju

Purpose: A three-building thatched residence with stone fences representing the traditional housing architecture in Jeju has been studied with the help of simulation tools. The main goal of this study was to identify the role of stone fences on the overall wind flow through the three building structures. Especially, the physical dimensions of the fence (height, size and, the number of holes) along with its distance away from the building wall (façade) have been extensively studied concerning its effect on the formation of wind streams as the flow develops interacting with its surroundings (building elements, ground, etc.). Method: Stone fences installed along the periphery of a traditional residence (comprised of three buildings each with a thatched roof) can significantly influence the passage of wind through its internal region. Various cases have been explored while changing the key parameters influencing wind flows, such as height and holes of fences. Result: The results provide clear evidence that holes in stone fences provides a more uniform path for the wind flow as compared to a fence without any holes. Moreover, the wind speed can be greatly influenced by the change in fence height and the presence of holes in it.

Analysis of the current situation in international show jumping and assessment of the influence of the proportion of Thoroughbred in the pedigree, horse demographics and sport season on the performance of horses

The aim of the research was to monitor current trends in international show jumping and assess how the proportion of Thoroughbred blood in the pedigree of horses, age, breed, sex and sport season influenced the competition results of show-jumping horses at the world level. The research was based on the databases of jumping rankings for the years 2010, 2014 and 2018 published by the International Federation for Equestrian Sports (FEI). All horses from the FEI rankings were included in the database with the exception of ponies and also horses lacking basic data. This yielded a total of 14,980 horses. The rankings of horses were calculated according to FEI methodology on the basis of the best 30 results every year in international show-jumping competitions with a minimum fence height of 1.45 m. The most represented breed was the Dutch Warmblood (19.26%) and the most common sex was gelding (43.98%). Since 2010 the standard proportion of Thoroughbred blood in the pedigrees of show-jumping horses has decreased and in 2018 the average proportion of Thoroughbred in the pedigree was 41.61%. The analysis of the statistics in the whole database established a significant (P ˂ 0.01) influence of all observed factors. The horses achieved a statistically higher ranking in 2018 (117.57) than in 2010 (98.33) and 2014 (105.93). The groups with a proportion of Thoroughbred between 30.10 and 70.00% achieved a significantly higher ranking than horses with a zero proportion of Thoroughbred in the pedigree. Stallions achieved a significantly higher ranking (117.84 points) compared to geldings (105.76 points) and mares (104.66 points). The horses aged 10–13 years old achieved better results (124.71 points) than the younger group of horses (76.66 points) and older group of horses (109.29 points, P = 0.0033). Statistically conclusive differences were found between AES horses (162.81 points) and the group of non-sport horse breeds (68.26 points) and also between AES horses and horses of unknown pedigree (38.61 points). There were no significant differences between the principal warmblood sport breeds produced in Europe.