Femoral Neck Cross-sectional Area Research Articles

The Influence of Accelerometer Epoch Length on Associations of Physical Activity Intensity and Volume with Bone Outcomes.

Two accelerometer metrics (intensity-gradient and average-acceleration) can be used to determine the relative contributions of physical activity (PA) volume and intensity for health, but it is unknown whether epoch length influences the associations detected. This is important when considering bone health, as bone is particularly responsive to high intensity PA, which may be underestimated by longer epochs. This study aimed to assess the associations between average-acceleration, a proxy measure of PA volume, and intensity-gradient, reflective of PA intensity distribution, from PA data from 1-s to 60-s epochs at age 17 to 23 years with bone outcomes at age 23 years. This is a secondary analysis of 220 participants (124 females) from the Iowa Bone Development Study, a longitudinal study of bone health from childhood to early adulthood. Accelerometer-assessed PA data, captured at age 17 to 23 years, were summarised over 1-s, 5-s, 15-s, 30-s, and 60-s epochs, to generate average-acceleration and intensity-gradient from each epoch length, averaged across ages. Regression analysed associations between mutually adjusted average-acceleration and intensity-gradient with dual-energy X-ray absorptiometry assessed total-body-less-head (TBLH) bone mineral content (BMC), spine areal bone mineral density (aBMD), hip aBMD, and femoral neck cross-sectional area and section modulus at age 23 years. Intensity-gradient was positively associated with TBLH BMC in females, with spine aBMD in males, and with hip aBMD and geometry in both sexes, when a 1 to 5-s epoch was used. Average-acceleration was positively associated with TBLH BMC, spine aBMD and hip aBMD in males, generally when the adjustment for intensity-gradient was from > 1-s epochs. Intensity and volume were important for bone outcomes in both sexes and males, respectively. A 1 to 5-s epoch length was most appropriate to assess the mutually adjusted associations of intensity-gradient and average-acceleration with bone outcomes in young adults.

Sarcopenia negatively affects hip structure analysis variables in a group of Lebanese postmenopausal women

BackgroundThe current study’s purpose is to compare hip structural analysis variables in a group of postmenopausal women with sarcopenia and another group of postmenopausal women with normal skeletal muscle mass index. To do so, the current study included 8 postmenopausal women (whose ages ranged between 65 and 84 years) with sarcopenia and 60 age-matched controls (with normal skeletal muscle mass index (SMI)). Body composition and bone parameters were evaluated by dual-energy X-ray absorptiometry (DXA).ResultsWeight, lean mass, body mass index, femoral neck cross-sectional area (FN CSA), FN section modulus (Z), FN cross sectional moment of inertia (CSMI), intertrochanteric (IT) CSA, IT Z, IT CSMI, IT cortical thickness (CT), femoral shaft (FS) CSA, FS Z and FS CSMI were significantly greater (p < 0.05) in women with normal SMI compared to women with sarcopenia. In the whole population, SMI was positively associated with IT CSA, IT Z, IT CSMI, IT CT, FS CSA, FS Z, FS CSMI, FS CT but negatively correlated to IT buckling ratio (BR) and FS BR.ConclusionThe current study suggests that sarcopenia has a negative effect on hip bone strength indices in postmenopausal women.

An 8-Year Longitudinal Analysis of Physical Activity and Bone Strength From Adolescence to Emerging Adulthood: The Iowa Bone Development Study.

Most pediatric physical activity and bone health research has focused on the period immediately around puberty; few have addressed bone structural strength outcomes. This study assessed the magnitude and consistency of the longitudinal relationships between device-measured vigorous-intensity physical activity (VPA) and structural bone strength outcomes across adolescence to emerging adulthood. Participants with 3 to 5 bone scans between the age of 11 and 19 years were studied (N = 439, 220 females, 1838 records). Dual-energy X-ray absorptiometry scans of the hip (hip structural analysis) and peripheral quantitative computed tomography scans of the tibia were obtained. Outcomes included femoral neck section modulus, femoral neck cross-sectional area, tibial Bone Strength Index, and tibial torsion strength (polar Strength Strain Index). Sex-specific bone mixed growth models were developed using biological age (chronological age - age at peak height velocity) as the time variable, and height, weight, and device-measured VPA as time-varying covariates. Models also included the VPA-biological age interaction. Individual-centered VPA and the VPA-biological age interaction were significantly, positively associated (P < .05) with Bone Strength Index, polar Strength Strain Index, section modulus, and cross-sectional area in males and females, indicating accumulative effects of VPA throughout maturation and beyond. Bone remains responsive to the mechanical loading of physical activity throughout adolescence and into emerging adulthood. Attention should be placed on promoting bone-strengthening physical activity after the prepubertal years when adult exercise patterns are likely formed.

Does Muscular Power Predict Bone Mineral Density in Young Adults?

The aim of this study was to explore the relationships between maximum power and bone variables in a group of young adults. Two hundred and one young adults (53 men and 148 women) whose ages range from 18 to 35 years voluntarily participated in this study. Weight and height were measured, and body mass index was calculated. Body composition, bone mineral content (BMC) and bone mineral density (BMD) were determined for each individual by dual-energy X-ray absorptiometry. Vertical jump was evaluated using a validated field test (Sargent test). The highest vertical jump was selected. Maximum power (P max, in watts) of the lower limbs was calculated accordingly. In young men, maximum power was positively correlated to whole body (WB) BMC (r = 0.65; p < 0.001), WB BMD (r = 0.41; p < 0.01), L1–L4 BMC (r = 0.54; p < 0.001), total hip (TH) BMC (r = 0.50; p < 0.001), femoral neck (FN) BMC (r = 0.35; p < 0.01), FN cross-sectional area (CSA) (r = 0.33; p < 0.05) and FN cross-sectional moment of inertia (CSMI) (r = 0.50; p < 0.001). In young women, maximum power was positively correlated to WB BMC (r = 0.48; p < 0.001), WB BMD (r = 0.28; p < 0.001), L1–L4 BMC (r = 0.34; p < 0.001), TH BMC (r = 0.43; p < 0.001), TH BMD (r = 0.21; p < 0.01), FN BMC (r = 0.42; p < 0.001), FN BMD (r = 0.31; p < 0.001), FN CSA (r = 0.41; p < 0.001), FN CSMI (r = 0.40; p < 0.001) and FN Z (r = 0.41; p < 0.01). The current study suggests that maximum power is a positive determinant of WB BMC, WB BMD, FN CSA, and FN CSMI in young men. It also shows that maximum power is a positive determinant of WB BMC, WB BMD, TH BMD, FN BMD, FN CSA, FN CSMI, and FN Z in young women.

Physical Performance Variables and Bone Parameters in a Group of Young Overweight and Obese Women

The aim of this study was to explore the relationships between physical performance variables and bone parameters such as bone mineral density (BMD), bone mineral content, hip geometry indices, and trabecular bone score in a group of young overweight and obese adult women. Sixty-eight overweight/obese (body mass index ≥25 kg/m2; 25.5–42.4 kg/m2) young women whose ages range from 18 to 35 yr participated in this study. Body composition and bone outcomes were measured by dual-energy X-ray absorptiometry. Maximum oxygen consumption (VO2 max, in liter per minute) was determined indirectly using a progressive shuttle run test. One-repetition-maximum half-squat was directly measured. Vertical jump was measured and maximum power (P max) of the lower limbs was calculated. Lean mass was positively correlated to whole body (WB) BMD, total hip BMD, femoral neck (FN) BMD, femoral neck cross-sectional area (FN CSA) and femoral neck cross sectional moment of inertia (FN CSMI) (p < 0.05). VO2 max (in liter per minute) and muscle power were positively correlated to WB BMD, total hip BMD, FN BMD, FN CSA, and FN CSMI (p < 0.05). One-repetition-maximum half-squat was positively correlated with lumbar spine trabecular bone score, WB BMD, FN BMD, FN CSA and FN CSMI (p < 0.05). This study suggests that lean mass, vertical jump, VO2 max (liter per minute), muscle power and one-repetition-maximum half squat are positive determinants of BMD and hip geometry indices in young overweight and obese women.

Muscular Maximal Strength Indices and Bone Variables in a Group of Elderly Women

The aim of the present study was to explore the relations between muscular maximal strength indices and bone parameters (bone mineral density [BMD], hip geometry indices, and trabecular bone score [TBS]) in a group of elderly women. This study included 35 healthy elderly women whose ages range between 65 and 75 yr (68.1 ± 3.1 yr). BMD (in gram per square centimeter) was determined for each individual by dual-energy X-ray absorptiometry at the whole body, lumbar spine (L1–L4), total hip (TH), and femoral neck (FN). L1–L4 TBS and hip geometry indices were also evaluated by dual-energy X-ray absorptiometry. Maximal muscle strength of bench press (1-repetition maximum [RM] bench press), maximal muscle strength of leg press (1-RM leg press), and handgrip were measured using validated methods. 1-RM bench press was positively correlated to TH BMD (r = 0.40; p < 0.05), FN BMD (r = 0.41; p < 0.05), FN section modulus (r = 0.33; p < 0.05), and FN cross-sectional moment of inertia (r = 0.35; p < 0.05). 1-RM leg press was positively correlated to TH BMD (r = 0.50; p < 0.01), FN BMD (r = 0.35; p < 0.05), FN cross-sectional area (r = 0.38; p < 0.05), and TBS (r = 0.37; p < 0.05). Handgrip was correlated only to FN cross-sectional moment of inertia (r = 0.43; p < 0.01). This study suggests that 1-RM bench press and 1-RM leg press are positive determinants of BMD in elderly women.

Professional Athletes with Fractures May Have a “Degraded” Trabecular Bone Score (TBS)

The aim of this study was to explore the relationships between performances obtained in different physical tests and bone parameters (bone mineral density [BMD], bone mineral content, hip geometry indices, and trabecular bone score [TBS]) in a group of young Lebanese overweight and obese adult men. Fifty-two overweight and/or obese (body mass index > 25 kg/m2) young men whose ages range from 18 to 35 yr participated in this study. Weight and height were measured, and body mass index was calculated. Body composition, BMD, cross-sectional area and section modulus (Z) of the femoral neck (FN), and TBS were measured by dual-energy X-ray absorptiometry. Maximum oxygen consumption (VO2 max, in liter per minute) was determined by direct measurement while exercising on a medical treadmill. One-repetition-maximum half-squat and maximum power (P max) of the lower limbs were measured using validated exercises. Lean mass was a positive determinant of whole-body bone mineral content (r = 0.71, p < 0.001), FN cross-sectional area (r = 0.51, p < 0.001), and FN Z (r = 0.58, p < 0.001). VO2 max (in liter per minute) was a positive determinant of whole-body BMD (r = 0.47, p < 0.001), total hip BMD (r = 0.43, p < 0.01), and FN BMD (r = 0.42, p < 0.01). VO2 max (in milliliter per minute per kilogram) was a positive determinant of TBS (r = 0.30, p < 0.05). One repetition maximum was a positive determinant of L1–L4 BMD (r = 0.33, p < 0.05). This study suggests that VO2 max (in liter per minute) is a positive determinant of BMD, and VO2 max (in milliliter per minute per kilogram) is a positive determinant of TBS in overweight and obese men.

Physical Performance Variables and Bone Mineral Density in a Group of Young Overweight and Obese Men

The aim of this study was to explore the relationships between performances obtained in different physical tests and bone parameters (bone mineral density [BMD], bone mineral content, hip geometry indices, and trabecular bone score [TBS]) in a group of young Lebanese overweight and obese adult men. Fifty-two overweight and/or obese (body mass index > 25 kg/m2) young men whose ages range from 18 to 35 yr participated in this study. Weight and height were measured, and body mass index was calculated. Body composition, BMD, cross-sectional area and section modulus (Z) of the femoral neck (FN), and TBS were measured by dual-energy X-ray absorptiometry. Maximum oxygen consumption (VO2 max, in liter per minute) was determined by direct measurement while exercising on a medical treadmill. One-repetition-maximum half-squat and maximum power (P max) of the lower limbs were measured using validated exercises. Lean mass was a positive determinant of whole-body bone mineral content (r = 0.71, p < 0.001), FN cross-sectional area (r = 0.51, p < 0.001), and FN Z (r = 0.58, p < 0.001). VO2 max (in liter per minute) was a positive determinant of whole-body BMD (r = 0.47, p < 0.001), total hip BMD (r = 0.43, p < 0.01), and FN BMD (r = 0.42, p < 0.01). VO2 max (in milliliter per minute per kilogram) was a positive determinant of TBS (r = 0.30, p < 0.05). One repetition maximum was a positive determinant of L1–L4 BMD (r = 0.33, p < 0.05). This study suggests that VO2 max (in liter per minute) is a positive determinant of BMD, and VO2 max (in milliliter per minute per kilogram) is a positive determinant of TBS in overweight and obese men.

Cumulative Menstrual Status is an Important Determinant of Femoral Neck Geometry in Exercising Women

Menstrual status, both past and current, has been established as an important determinant of bone mineral density (BMD) in young exercising women. However, little is known about the association between the cumulative effect of menstrual status and bone geometry and strength. PURPOSE: To explore the association between cumulative menstrual status and estimated femoral neck (FN) geometry and strength assessed using dual-energy x-ray absorptiometry (DXA) in exercising women. METHODS: 95 exercising women (22.2±0.4 yr, BMI 21.1±0.2 kg/m2) participated in this cross-sectional study. Women were divided into three groups: 1) current and past regular menstrual cycles (C+P-R, n=23), 2) current and past irregular menstrual cycles (C+P-IR, n=51), and 3) current or past irregular cycles (C/P-RIR, n=21). Estimates of FN geometry and strength were obtained from hip strength analysis. Cross-sectional moment of inertia (CSMI), cross-sectional area (CSA), and strength index (SI) were calculated at the FN. Low CSMI, CSA, and SI were operationally defined as values below the median. Chi-square tests and multivariable logistic regression were performed to compare the prevalence and determine the odds, respectively, of low CSMI, CSA, and SI among groups. RESULTS: The groups did not differ in weight, height, BMI, or body composition (p>0.05); however, the C+P-IR group was younger than the C+P-R group (p=0.023). Cumulative menstrual status was a significant predictor of low FN CSMI and low FN CSA after controlling for confounding variables. When compared with the C+P-R group, the odds of C+P-IR women having low FN CSMI were 7.3 times greater (95% CI: 1.6-34.0, p=0.011) and the odds of C/P-RIR women having low FN CSA were 4.5 times greater (95% CI: 1.1-18.9, p=0.039). Chi square analysis revealed no significant association between menstrual group and low FN CSMI, CSA, or SI (p>0.05). CONCLUSION: In exercising women, the cumulative effect of current and past menstrual irregularity appears to be an important predictor of smaller estimates of FN geometry, which may serve as another means, beyond BMD, by which menstrual irregularity compromises bone strength. These findings support the recommendation that current and past menstrual status should be evaluated in female athletes when assessing bone health. Supported by US DoD (PR054531)

Validation of the ‘FeMorph’ software in planning cam osteochondroplasty by incorporating labral morphology

Impingement resulting from a cam deformity may cause pain, limit the hip joint range of motion (RoM) and lead to osteoarthritis. We have previously developed FeMorph software to quantify and plan corrective surgery and predict hip RoM post surgery. This study aimed to validate the software and evaluate the influence of the acetabular labrum on hip RoM. Computed tomography data from 92 femur-pelvis pairs were analysed in conjunction with the inter/intra-observer reliability. Four cadaveric hips were dissected, and the three-dimensional (3D) shape and size of the acetabular labrum for these hips was obtained using laser scan. The influence of the acetabular labrum in the RoM and subsequent planning for corrective surgery were then evaluated in cadavers for models with and without a labrum, and used as a first step towards validation of FeMorph RoM prediction. FeMorph was successfully used to model cam deformities and plan corrective surgery. Three-dimensional alpha angles were reduced to below 50° after virtual surgery without an excessive reduction in femoral neck cross-sectional area, which could increase fracture risk. A mean increase of 8° ± 2° in permitted internal rotation was observed during impingement testing following removal of the labrum. FeMorph provides a reliable and useful method to model and plan cam deformity correction. This study indicates that the presence of the labrum is responsible for a substantial decrease in permitted internal rotation at the hip joint. This has implications for surgical planning models which often only account for bony impingement.

Objectively measured physical activity trajectories predict adolescent bone strength: Iowa Bone Development Study

BackgroundPhysical activity improves bone strength and reduces the risk for osteoporotic fractures. However, there are substantial gaps in our knowledge as to when, how and how much activity is optimal...

Body composition and reproductive function exert unique influences on indices of bone health in exercising women

Reproductive function, metabolic hormones, and lean mass have been observed to influence bone metabolism and bone mass. It is unclear, however, if reproductive, metabolic and body composition factors play unique roles in the clinical measures of areal bone mineral density (aBMD) and bone geometry in exercising women. This study compares lumbar spine bone mineral apparent density (BMAD) and estimates of femoral neck cross-sectional moment of inertia (CSMI) and cross-sectional area (CSA) between exercising ovulatory (Ov) and amenorrheic (Amen) women. It also explores the respective roles of reproductive function, metabolic status, and body composition on aBMD, lumbar spine BMAD and femoral neck CSMI and CSA, which are surrogate measures of bone strength. Among exercising women aged 18–30years, body composition, aBMD, and estimates of femoral neck CSMI and CSA were assessed by dual-energy x-ray absorptiometry. Lumbar spine BMAD was calculated from bone mineral content and area. Estrone-1-glucuronide (E1G) and pregnanediol glucuronide were measured in daily urine samples collected for one cycle or monitoring period. Fasting blood samples were collected for measurement of leptin and total triiodothyronine. Ov (n=37) and Amen (n=45) women aged 22.3±0.5years did not differ in body mass, body mass index, and lean mass; however, Ov women had significantly higher percent body fat than Amen women. Lumbar spine aBMD and BMAD were significantly lower in Amen women compared to Ov women (p<0.001); however, femoral neck CSA and CSMI were not different between groups. E1G cycle mean and age of menarche were the strongest predictors of lumbar spine aBMD and BMAD, together explaining 25.5% and 22.7% of the variance, respectively. Lean mass was the strongest predictor of total hip and femoral neck aBMD as well as femoral neck CSMI and CSA, explaining 8.5–34.8% of the variance. Upon consideration of several potential osteogenic stimuli, reproductive function appears to play a key role in bone mass at a site composed of primarily trabecular bone. However, lean mass is one of the most influential predictors of bone mass and bone geometry at weight-bearing sites, such as the hip.

Anthropometric Predictors of Geometric Indices of Hip Bone Strength in a Group of Lebanese Postmenopausal Women

The effects of anthropometric characteristics on hip bone strength in postmenopausal women are not completely elucidated. The aim of this study was to investigate the influence of anthropometric characteristics on geometric indices of hip bone strength using the hip structure analysis (HSA) program in a group of Lebanese postmenopausal women. This study included 109 postmenopausal women (aged 64–84yr). Age and years since menopause were recorded. Body composition and bone mineral density were assessed by dual-energy X-ray absorptiometry (DXA). To evaluate hip bone strength, DXA scans were analyzed at the femoral neck (FN), the intertrochanteric (IT), and the femoral shaft (FS) by the HSA program. Cross-sectional area (CSA), an index of axial compression strength, section modulus (Z), an index of bending strength, and buckling ratio (BR), an estimate of cortical stability in buckling, were measured from bone mass profiles. Using univariate analysis, weight, height, body mass index (BMI), lean mass, and fat mass were positively correlated to CSA and Z of the FN, IT, and FS. Weight, BMI, fat mass, and fat mass percentage were negatively correlated to BR of the FN, IT, and FS. Multiple linear regression analysis showed that lean mass was a stronger determinant of FN CSA, FN Z, IT Z, and FS Z than fat mass, whereas fat mass was a stronger determinant of IT CSA, FS CSA, IT BR, and FS BR than lean mass. This study suggests that, in postmenopausal women, fat mass is a strong predictor of hip axial compression strength and cortical stability in buckling, and lean mass is a strong predictor of hip bending strength.

Adaptation of the Proximal Femur to Skeletal Reloading After Long-Duration Spaceflight

We studied the effect of re-exposure to Earth's gravity on the proximal femoral BMD and structure of astronauts 1 year after missions lasting 4-6 months. We observed that the readaptation of the proximal femur to Earth's gravity entailed an increase in bone size and an incomplete recovery of volumetric BMD. Bone loss is a well-known result of skeletal unloading in long-duration spaceflight, with the most severe losses occurring in the proximal femur. However, there is little information about the recovery of bone loss after mission completion and no information about effect of reloading on the structure of load-bearing bone. To address these questions, we carried out a study of the effect of re-exposure to Earth's gravity on the BMD and structure of the proximal femur 1 year after missions lasting 4-6 months. In 16 crew members of the International Space Station (ISS) making flights of 4.5-6 months, we used QCT imaging to measure the total, trabecular, and cortical volumetric BMD (vBMD) of the proximal femur. In addition to vBMD, we also quantified BMC, bone volume, femoral neck cross-sectional area (CSA), and femoral neck indices of compressive and bending strength at three time-points: preflight, postflight, and 1 year after mission. Proximal femoral bone mass was substantially recovered in the year after spaceflight, but measures of vBMD and estimated bone strength showed only partial recovery. The recovery of BMC, in the absence of a comparable increase in vBMD, was explained by increases in bone volume and CSA during the year after spaceflight. Adaptation of the proximal femur to reloading entailed an increase in bone size and an incomplete recovery of vBMD. The data indicate that recovery of skeletal density after long-duration space missions may exceed 1 year and supports the evidence in the aging literature for periosteal apposition as a compensatory response for bone loss. The extent to which this compensatory effect protects against fracture remains to be seen.

Identification of a quantitative trait locus on rat chromosome 4 that is strongly linked to femoral neck structure and strength

Risk factors for osteoporotic hip fracture include reduced bone mineral density and poor structure of the femoral neck, both of which are heritable traits. Previously, we showed that despite similar body size, Fischer 344 (F344) rats have significantly different skeletal traits compared with Lewis (LEW) rats. To identify a gene or genes regulating fracture risk at the femoral neck, we mapped quantitative trait loci (QTL) for femoral neck density and structure phenotypes using a 595 F2 progeny derived from the inbred F344 and LEW strains of rats. Femoral neck phenotypes included volumetric bone mineral density (vBMD), neck width, femoral neck cross-sectional area and polar moment of inertia ( Ip). A 20-cM genome-wide scan was performed using 118 microsatellite markers and linkage analysis was conducted to identify chromosomal regions harbor QTL for femoral neck phenotypes. Strong evidence of linkage ( P < 0.01) to femoral neck vBMD was observed on chromosomes (Chrs) 1, 2, 4, 5, 7, 10 and 15. QTL affecting femoral neck structure and biomechanical properties were detected only on Chr 4 where the F344 alleles were shown to improve femoral neck structure, whereas these alleles had no effect on bone measurements at the lumbar spine and only modest effects at the femoral midshaft. In contrast, QTL on Chrs 1, 2 and 10 affected multiple skeletal sites. Several QTL regions in this study are homologous to human chromosomal regions, where linkage to femoral neck and related phenotypes has been reported previously. These findings represent an important first step in localizing and identifying genes that influence hip fragility.

PHYSICAL ACTIVITY PREDICTS FEMORAL NECK STRENGTH IN YOUNG CHILDREN

INTRODUCTION Bone adapts to mechanical loading by geometrically remodeling to increase bending and axial compression strength. These adaptations would not necessarily translate to increased areal bone mineral density (BMD) or bone mineral content (BMC) as measured using dual-energy X-ray absorptiometry (DXA). However, BMD and bone area can be used to estimate the section modulus (Z) and bone cross-sectional area (CSA), which are indices of bending and axial strength, respectively. PURPOSE In this cross-sectional study, we investigated associations between physical activity and structural measures in 440 pre-school children (mean age 5.2 yr). We also examined whether lean mass (fat-free mass minus BMC) which is predominantly muscle, mediates the relationship between physical activity and bone structural strength. METHODS Physical activity was measured using 4-d accelerometry and parental report of children's physical activity. BMC and bone width were assessed using the Hologic 2000 DXA. Femoral neck Z, femoral neck CSA, and total body lean tissue were derived from conventional DXA outputs. All data were adjusted for weight and height. RESULTS Boys had greater Z, CSA, and lean mass than girls. Boys were also more physically active than girls. Accelerometry and parental report were positively associated with Z and CSA in boys (r = 0.19–0.24). Accelerometry was positively associated with Z (r = 0.20) and CSA (r = 0.26) in girls. The proportion of variance explained by physical activity using linear regression to model Z and CSA ranged from R2 = 3.1 to 6.0%. When lean tissue was allowed to enter, the variance due to physical activity was reduced but remained significant in all models except Z for girls. CONCLUSION Results suggest that even in young (pre-pubescent) children, bone adapts to usual levels of physical activity by geometrically remodeling. Girls have lower levels of lean mass and physical activity than boys; these factors may contribute to less than optimal bone strength in girls.

Volumetric quantitative computed tomography of the proximal femur: Precision and relation to bone strength

We have developed a three-dimensional computed tomography (CT) scanning and image analysis method for measurement of trabecular and integral bone mineral density (BMD) and geometry in automatically determined femoral-neck and trochanteric subregions of the proximal femur. We measured the correlation of the density and geometry variables to femoral strength assessed in vitro under loading simulating a single-limb condition and a fall to the side. While BMD alone accounted for 48%–77% of the variability in strength for the stance loading configuration, femoral neck cross-sectional area (minCSA) and femoral neck axis length (FNAL) also contributed independently to femoral strength, and a combination of BMD and geometry variables explained 87%–93% of the variance in the data. For the fall loading configuration, trochanteric trabecular BMD alone explained 87% of the variability of strength. The reproducibility in vivo of the technique was assessed in a group of seven postmenopausal women, who underwent repeat scans with repositioning. For trabecular BMD, the precision was 1.1% and 0.6% for the femoral neck and trochanteric subregions, respectively, compared to 3.3% and 1.6% for the corresponding integral envelopes. Thus, trabecular BMD measurements were reproducible and highly correlated to biomechanical strength measurements. These results support further exploration of quantitative CT for assessment of osteoporosis at the proximal femur.