Feed-forward Neural Network Model Research Articles

Towards Reliable Barrier Systems: A Constrained XGBoost Model Coupled with Gray Wolf Optimization for Maximum Swelling Pressure of Bentonite

Bentonite and bentonite mixtures are used as buffer material for deep geological radioactive waste repositories. The proper determination of bentonite maximum swelling pressure is important as it influences the long-term stability and sealing characteristics of the barrier system. We developed a constrained machine learning model based on extreme gradient boosting (XGBoost) algorithm tuned with grey wolf optimization (GWO) to determine the maximum swelling pressure of bentonite and bentonite mixtures. We integrated a penalty term into the XGBoost algorithm’s loss function to constrain the model during the training phase ensuring meaningful predictions. To this end, we compiled a dataset containing 305 experimental data of bentonite maximum swelling pressure and other relevant soil properties including montmorillonite content, liquid limit, plastic limit, plasticity index, initial water content, and soil dry density to develop the model. The performance of the hybrid GWO-XGBoost model was benchmarked against feed-forward and cascade-forward neural network models. The GWO-XGBoost model showed a better performance in estimating the experimental values comparing to the other models, thereby demonstrating its effectiveness and reliability in determining the maximum swelling pressure of bentonite and bentonite mixtures.

Length of Stay Prediction With Standardized Hospital Data From Acute and Emergency Care Using a Deep Neural Network.

Length of stay (LOS) is an important metric for the organization and scheduling of care activities. This study sought to propose a LOS prediction method based on deep learning using widely available administrative data from acute and emergency care and compare it with other methods. All admissions between January 1, 2011 and December 31, 2019, at 6 university hospitals of the Hospices Civils de Lyon metropolis were included, leading to a cohort of 1,140,100 stays of 515,199 patients. Data included demographics, primary and associated diagnoses, medical procedures, the medical unit, the admission type, socio-economic factors, and temporal information. A model based on embeddings and a Feed-Forward Neural Network (FFNN) was developed to provide fine-grained LOS predictions per hospitalization step. Performances were compared with random forest and logistic regression, with the accuracy, Cohen kappa, and a Bland-Altman plot, through a 5-fold cross-validation. The FFNN achieved an accuracy of 0.944 (CI: 0.937, 0.950) and a kappa of 0.943 (CI: 0.935, 0.950). For the same metrics, random forest yielded 0.574 (CI: 0.573, 0.575) and 0.602 (CI: 0.601, 0.603), respectively, and 0.352 (CI: 0.346, 0.358) and 0.414 (CI: 0.408, 0.422) for the logistic regression. The FFNN had a limit of agreement ranging from -2.73 to 2.67, which was better than random forest (-6.72 to 6.83) or logistic regression (-7.60 to 9.20). The FFNN was better at predicting LOS than random forest or logistic regression. Implementing the FFNN model for routine acute care could be useful for improving the quality of patients' care.

Deep hybrid modeling of a HEK293 process: Combining long short-term memory networks with first principles equations.

The combination of physical equations with deep learning is becoming a promising methodology for bioprocess digitalization. In this paper, we investigate for the first time the combination of long short-term memory (LSTM) networks with first principles equations in a hybrid workflow to describe human embryonic kidney 293 (HEK293) culture dynamics. Experimental data of 27 extracellular state variables in 20 fed-batch HEK293 cultures were collected in a parallel high throughput 250 mL cultivation system in an industrial process development setting. The adaptive moment estimation method with stochastic regularization and cross-validation were employed for deep learning. A total of 784 hybrid models with varying deep neural network architectures, depths, layers sizes and node activation functions were compared. In most scenarios, hybrid LSTM models outperformed classical hybrid Feedforward Neural Network (FFNN) models in terms of training and testing error. Hybrid LSTM models revealed to be less sensitive to data resampling than FFNN hybrid models. As disadvantages, Hybrid LSTM models are in general more complex (higher number of parameters) and have a higher computation cost than FFNN hybrid models. The hybrid model with the highest prediction accuracy consisted in a LSTM network with seven internal states connected in series with dynamic material balance equations. This hybrid model correctly predicted the dynamics of the 27 state variables (R2 = 0.93 in the test data set), including biomass, key substrates, amino acids and metabolic by-products for around 10 cultivation days.

An Investigation of LES Wall Modeling for Rayleigh–Bénard Convection via Interpretable and Physics-Aware Feedforward Neural Networks with DNS

Abstract The traditional approach of using the Monin–Obukhov similarity theory (MOST) to model near-surface processes in large-eddy simulations (LESs) can lead to significant errors in natural convection. In this study, we propose an alternative approach based on feedforward neural networks (FNNs) trained on output from direct numerical simulation (DNS). To evaluate the performance, we conduct both a priori and a posteriori tests. In the a priori (offline) tests, we compare the statistics of the surface shear stress and heat flux, computed from filtered DNS input variables, to the stress and flux obtained from the filtered DNS. Additionally, we investigate the importance of various input features using the Shapley additive explanations value and the conditional average of the filter grid cells. In the a posteriori (online) tests, we implement the trained models in the System for Atmospheric Modeling (SAM) LES and compare the LES-generated surface shear stress and heat flux with those in the DNS. Our findings reveal that vertical velocity, a traditionally overlooked flow quantity, is one of the most important input features for determining the wall fluxes. Increasing the number of input features improves the a priori test results but does not always improve the model performance in the a posteriori tests because of the differences in input variables between the LES and DNS. Last, we show that physics-aware FNN models trained with logarithmic and scaled parameters can well extrapolate to more intense convection scenarios than in the training dataset, whereas those trained with primitive flow quantities cannot. Significance Statement The traditional near-surface turbulence model, based on a shear-dominated boundary layer flow, does not represent near-surface turbulence in natural convection. Using a feedforward neural network (FNN), we can construct a more accurate model that better represents the near-surface turbulence in various flows and reveals previously overlooked controlling factors and process interactions. Our study shows that the FNN-generated models outperform the traditional model and highlight the importance of the near-surface vertical velocity. Furthermore, the physics-aware FNN models exhibit the potential to extrapolate to convective flows of various intensities beyond the range of the training dataset, suggesting their broader applicability for more accurate modeling of near-surface turbulence.

Performance analysis of FFNN and Kriging model on prediction of ionospheric TEC during April 2022 – X 1.1 solar flare

Artificial Intelligence (AI) in data analysis has become an integral tool in recent times. In this research, Total Electron Content (TEC) prediction by the Feed Forward Neural Network (FFNN) model is compared with the Ordinary Kriging based Surrogate Model (OKSM) to verify the significance of the sample size required for FFNN and OKSM. To assess the credibility of the constructed models, the FFNN and OKSM prediction models were evaluated on 30 April 2022, during which a Solar Flare (SF) of intensity X 1.1 occurred. The TEC data is taken from Hyderabad (17.31°N and 78.55°E) from IONOLAB data servers. The solar parameters were collected from the NASA OMNIWEB data server. The surrogate model is built to predict the seventh-day TEC values by using the previous six days of TEC data, Whereas the FFNN model uses 146 days of TEC data as training data set to predict the subsequent four days of TEC. The performance of the models is evaluated using statistical parameters like Root Mean Square Error (RMSE), Correlation Coefficient (CC), Mean Absolute Error (MAE) and symmetric Mean Absolute Percentage Error (sMAPE). The results were represented as linear regression scatter plots, showing fewer residuals for the constructed prediction models.

Influences of straw alkaline pretreatment on biogas production and digestate characteristics: artificial neural network and multivariate statistical techniques.

Anaerobic digestion is one of the best options for producing valuable end products (biogas and biofertilizer). The aim of this study was to investigate the influences of thermoalkaline pretreatment of wheat straw on biogas production and digestate characteristics from codigestion with waste-activated sludge. Different alkaline conditions (NaOH, KOH and Na2CO3) and pretreatment durations (1, 3 and 5 h) were used for straw pretreatment. Batch anaerobic codigestion of sludge and pretreated straw was conducted under different pretreatment conditions. A feedforward neural network (FFNN) model, logistic model and statistical analysis were applied to the experimental data to predict biogas and investigate the significance and relationships among the variables. NaOH pretreatment for 5 h showed the best treatment conditions: biogas yield was 6.59 times higher than that without treatment. Moreover, the proportions of total solids, total volatile solids, chemical oxygen demand and microbial count removed reached 63.52%, 74.60%, 78.15% and 82.22%, respectively. The methane content was 67.50%, indicating that the biogas had a high quality. The thermoalkaline pretreatment significantly affected biogas production and digestate characteristics, allowing it to be used as a biofertilizer. Experimental data were successfully modelled for predicting biogas production using the applied models. The R2 values reached 0.985 and 0.999 for the logistic and FFNN models, respectively.

Prediction of Hydrogen Abstraction Rate Constants at the Allylic Site between Alkenes and OH with Multiple Machine Learning Models.

Hydrogen abstraction reactions between hydrocarbons and hydroxyl radicals are important propagation steps in radical chain reactions, playing a crucial role in atmospheric and combustion chemistry. This study focuses on predicting the rate constants of the prototype of the reaction class of hydrogen abstractions, i.e., the primary allylic hydrogen abstraction from alkenes by the OH radical, via utilizing machine learning (ML) methods. Specifically, three distinct models, namely, feedforward neural network (FNN), support vector regression (SVR), and Gaussian process regression (GPR), have been employed to construct robust ML models for prediction. We proposed a novel strategy that seamlessly integrates descriptor preprocessing, a pairwise linear correlation analysis, and a model-specific Wrapper method to enhance the effectiveness of the feature selection procedure. The selected feature subset was then evaluated using two cross-validation techniques, i.e., leave-one-group-out (LOGO) and K-fold cross-validations, for each of the three ML models (FNN, SVR, and GPR) to assess their predictive and stability performance. The results demonstrate that the FNN model, trained with seven representative descriptors, achieves superior performance compared to the other two methods. For the FNN model, the average percentage deviation is 39.06% on the test set by performing LOGO cross-validation, while the repeated 10-fold cross-validation achieves a percentage prediction deviation of 19.1%. Two larger alkenes with 10 carbons were selected to test the prediction performance of the trained FNN model on primary allylic hydrogen abstraction. Results show that the kinetic predictions follow well the modified three-parameter Arrhenius equation, indicating the reliable performance of FNN in predicting hydrogen abstraction rate constants, especially for the primary allylic site. Hopefully, this work can shed useful light on the application of ML in generating chemical kinetic parameters of hydrocarbon combustion chemistry.

Predictive Quality Analytics of Surface Roughness in Turning Operation Using Polynomial and Artificial Neural Network Models

The variability of the material properties of steel from different suppliers causes problems in achieving the required surface quality after turning. Therefore, the manufacturer needs to estimate the resulting quality before starting production, especially if it is an expensive, small-batch production from stainless steel. Predictive models will make it possible to estimate the surface roughness from the mechanical properties of steel and thus support decision making about supplier selection or acceptance of a material supply. This research presents a step-by-step decision-making procedure, which enables the trained staff to make quick decisions based on commonly available information in the Mill Test Certificate (MTC). A new multivariate second-order polynomial model and feedforward backpropagation artificial neural network (ANN) models have been developed using input variables from the MTC: Tensile Strength, Yield Strength, Elongation, and Hardness. Models were used to enhance the methodological robustness in formulating the decision if the predicted surface roughness is outside the required range, even before accepting the delivery. Both models can accurately predict surface roughness, while the ANN model is more accurate than the polynomial model; however, the predictive model is sensitive to the accuracy of the input data, and the model’s prediction is valid only under precisely defined conditions.

An efficient deep learning-based workflow for CO2 plume imaging considering model uncertainties with distributed pressure and temperature measurements

Monitoring CO2 plumes throughout the operation of geologic CO2 sequestration projects is essential to environmental safety. The evolution of underground CO2 saturation can be predicted using high-fidelity numerical simulations. However, high-fidelity simulations can be prohibitively expensive to compute. As a result of recent developments in data-driven models, rapid predictions of the CO2 plume can now be made using readily available pressure and temperature measurements. This study presents a novel deep learning-based workflow for efficiently visualizing CO2 plumes in near real-time while considering their uncertainties.In our deep learning workflow, we visualize the CO2 plume images in the reservoir as a propagating saturation front, represented by ‘onset time’, using field measurements, including downhole pressure and temperature. At a given location, the ‘onset time’ is the calendar time when the CO2 saturation exceeds a certain threshold. Therefore, a single image of the CO2 front propagation is captured using the ‘onset time’ rather than storing multiple CO2 saturation images at different time steps. The use of ‘onset time’ significantly reduces memory and computational cost of deep learning-based framework, enabling large-scale field applications.We use a variational autoencoder-decoder (VAE) network to compress high dimensional ‘onset time’ images into low dimensional latent variables while considering uncertainties of the predicted images. The use of VAE and onset time, simplifies the overall neural network architecture and significantly enhances the training efficiency. To estimate the latent variables of the VAE network, we train a feed forward neural network model that incorporates available monitoring data such as downhole pressure and temperature measurements. The estimated latent variables are then fed into a trained decoder network to generate 3D onset time images, visualizing the propagation of CO2 plume in near real time.The proposed workflow is applied to both synthetic and field cases, where the field application is a large-scale geological carbon storage project in a carbonate reef reservoir in the Northern Niagaran Pinnacle Reef Trend in Michigan, USA. The field measurements include distributed temperature sensing (DTS) and distributed pressure responses from down-hole gauges along the monitoring well. The predicted CO2 plume images provided by the proposed workflow are shown to be consistent with the simulation results of traditional history matched model using genetic algorithm. Our deep learning-based framework can predict the CO2 front propagation in terms of onset time in seconds, making it well-suited for real time decision-making and operational optimization.

Automatic History Matching for Adjusting Permeability Field of Fractured Basement Reservoir Simulation Model Using Seismic, Well Log, and Production Data

Developing automatic history matching (AHM) methods to replace the traditional manual history matching (MHM) approach in adjusting the permeability distribution of the reservoir simulation model has been studied by many authors. Because permeability values need to be evaluated at hundreds of thousands of grid cells in a typical reservoir simulation model, it is necessary to apply a reparameterization technique to allow the optimization algorithms to be implemented with fewer variables. In basic reparameterization techniques including zonation and pilot point methods, the calibrations are usually based solely on the production data with no systematic link to the geological and geophysical data, and therefore, the obtained permeability distribution may be not geologically consistent. Several other reparameterization techniques have attempted to preserve geological consistency by incorporating 4D seismic data; however, these techniques cannot be applied to our fractured basement reservoirs (FBRs) as they do not have 4D seismic data. Taking into account these challenges, in this study, an AHM methodology and workflow have been developed using a new reparameterization technique. This approach attempts to minimize the potential for geological nonconsistency of the calibrated results by linking the permeability to geophysical data. The proposed methodology can be applied to fields with only traditional geophysical data (3D seismic and conventional well logs). In the proposed workflow, the spatial distributions of seismic attributes and geomechanical properties were calculated and estimated from 3D seismic data and well logs, respectively. After that, a feed-forward artificial neural network (ANN) model trained by the back-propagation algorithm of the relationship between initial permeability with seismic attributes and geomechanical properties of their grid cell values is developed. Then, the calibration of the permeability distribution is performed by adjustment of the ANN model. Modification of the ANN model is performed using the simultaneous perturbation stochastic approximation (SPSA) algorithm to calibrate transmission coefficients in the ANN model to minimize the discrepancy between the simulated results and observed data. The developed methodology is applied to calibrate the permeability distribution of a simulation model of Bach Ho FBR in Vietnam. The effectiveness of the methodology is evident by comparing the historical matches with an available manually history-matched simulation model. The application shows that the proposed methodology could be considered as a suitable practical approach for adjusting the permeability distribution for FBR reservoir simulation models.

The State of Charge Estimation of LiFePO4 Batteries Performance Using Feed Forward Neural Network Model

Lithium-ion batteries like LiFePO4 become a new choice for electrical energy sources in the world and can be used on electric vehicles. Battery packs monitoring by Battery Management System in electric vehicles require accurate monitoring. The inaccuracy of monitoring such property can lead to low safety, low efficiency and battery’s life reduction. Estimating state of charge (SoC) to prevent battery damage from overcharging and over discharging. Some of the methods used to estimate SoC such as Coulomb Counting have errors during the charge and discharge process. This research proposes a counting method for measuring SoC with the artificial neural networks (ANN) to provide more precise estimation. Feed Forward Neural Network (FFNN) is an ANN model that can give an accurate estimation of SoC by learning data of the charge-discharge process performed on sample batteries. The sample batteries are tested with a battery analyzer to get its charging-discharging data consisting of variables such as voltage, current, capacity, and time with C-Rate variations. These variables data are then learned by the modeled FFNN to predict SoC value. The FFNN model consisted of 16 neurons in the first layer, 8 neurons in the second layer, and 4 neurons in the third layer. The predicted SoC value from FFNN has a similar value with its real SoC value. The relationship between SoC and battery voltage is plotted in a curve and shows an identical characteristic with how the SoC-Voltage curve of a battery should be and have a low mae value. This FFNN model can be applied further such as in electric vehicles to maintain its safety and for longer use.

Workers Fatigue Monitoring for Well-being Improvement in Manufacturing

In Industry 5.0, worker well-being is paramount for organizational resilience and sustainability. Physical fatigue, work-life balance, and job competency significantly impact worker welfare and, therefore, efficiency and effectiveness. This study collects data in different industrial scenarios using non-invasive wearable devices for dynamic data and questionnaires for quasi-static data. Using Machine Learning algorithms, including Random Forest and Feedforward Neural Network models, the study predicts the physical fatigue of workers across multi-class and binary classifications. The developed Fatigue Monitoring System software integrates these models to monitor fatigue and improve worker well-being.

Free surface flow assessment through a homogeneous earth-fill dam using a feed-forward neural network model

Free surface flow assessment through a homogeneous earth-fill dam using a feed-forward neural network model

An automated ECG-based deep learning for the early-stage identification and classification of cardiovascular disease.

Heart disease represents the leading cause of death globally. Timely diagnosis and treatment can prevent cardiovascular issues. An Electrocardiograms (ECG) serves as a diagnostic tool for identifying heart difficulties. Cardiovascular Disease (CVD) often gets identified through ECGs. Deep learning (DL) garners attention in healthcare due to its potential in swiftly diagnosing ECG anomalies, crucial for patient monitoring. Conversely, automatic CVD detection from ECGs poses a challenging task, wherein rule-based diagnostic models usually achieve top-notch performance. These models encounter complications in supervision vast volumes of diverse data, demanding widespread analysis and medical capability to ensure precise CVD diagnosis. This study aims to enhance cardiovascular disease diagnosis by combining symptom-based detection and ECG analysis. To enhance these experiments, we built a novel automated prediction method based on a Feed Forward Neural Network (FFNN) model. The fundamental objective of our method is to develop the accuracy of ECG diagnosis. Our strategy employs chaos theory and destruction analysis to combine optimum deep learning features with a well-organized set of ECG properties. In addition, we use the constant-Q non-stationary Gabor transform (CQNGT) to convert one-dimensional ECG data into a two-dimensional picture. A pre-trained FFNN processes this image. To identify significant features from the FFNN output that correspond with the ECG data, we employ pairwise feature proximity. According to experimental findings, the suggested system, FFNN-CQNGT, surpasses other state-of-the-art systems in terms of precision of 94.89%, computational efficiency of 2.114 ms, accuracy of 95.55%, specificity of 93.77%, and sensitivity of 93.99% and MSE 40.32%. Contributing an automated ECG-based DL system based on FFNN-CQNGT for early-stage cardiovascular disease identification and classification holds great potential for both patient care and public health.

Comparative analysis of feed-forward neural network and second-order polynomial regression in textile wastewater treatment efficiency

<abstract><p>This study refines a single-layer Feed-Forward Neural Network (FFNN) for the treatment of textile dye wastewater, concentrating on percentage decolorization (%DEC) and percentage chemical oxygen demand (%COD) reduction. The optimized neural network configuration comprises four input and one output neuron, fine-tuned based on the mean squared error (MSE). The training phase demonstrates a consistent MSE decline, reaching its lowest at epoch 209 for %DEC and epoch 34 for %COD, with corresponding MSEs of $1.799 \times 10^{-5}$ and $ 1.4 \times 10^{-3} $, respectively. The maximum absolute errors for %DEC and %COD were found to be $ 4.0787 $ and $ 2.4486 $, while the mean absolute errors were $ 0.4821 $ and $ 0.7256 $, respectively. In contrast to second-degree polynomial regression, the FFNN model exhibits enhanced predictive accuracy, as indicated by higher $ R^2 $ values of $ 0.99363 $ for %DEC and $ 0.99716 $ for %COD, and reduced error metrics.</p></abstract>

A feed forward deep neural network model using feature selection for cloud intrusion detection system

SummaryThe rapid advancement and growth of technology have rendered cloud computing services indispensable to our activities. Threats and intrusions have since multiplied exponentially across a range of industries. In such a scenario, the intrusion detection system, or simply the IDS, is deployed on the network to monitor and detect any attacks. The paper proposes a feed‐forward deep neural network (FFDNN) method based on deep learning methodology using a filter‐based feature selection model. The feature selection strategy aims to determine and select the most highly relevant subset of attributes from the feature importance score for training the deep learning model. Three benchmark data sets were used to assess the experiment: CIC‐IDS 2017, UNSW‐NB15, and NSL‐KDD. In order to justify the proposed technique, a comparison was done using other learning algorithms ranging from classical machine learning to ensemble learning methods that can detect various attacks. The experiments showed that the FFDNN model with reduced feature subsets gave the highest accuracy of 99.53% and 94.45% in the NSL‐KDD and UNSW‐NB15 data sets, while the ensemble‐based XGBoost model performed better in the CIC‐IDS 2017 data set. In addition, the results show that the overall accuracy, recall, and F1 score of the deep learning algorithm are generally better for all the data sets.

A novel tuberculosis diagnosis approach using feed-forward neural networks and binary pattern of phase congruency

Tuberculosis is a severe and contagious lung disease that kills more than one million people annually, representing a real public health problem worldwide. Meanwhile, researchers and industry have highlighted the potential of analyzing and classifying chest radiographs (CXR) with artificial intelligence (AI). However, although high-performance industry solutions to aid in diagnosing have become a reality, vulnerable populations and underdeveloped countries have struggled to access them. In this sense, accessible and low-cost alternatives are essential to reach the needs of those populations that rely on public actions and services. Therefore, we propose a method to assist in the screening, diagnosing, and classifying of tuberculosis cases with a low-cost and high-efficiency computational approach. Our method uses a novel feature extraction approach based on binary patterns of phase congruence (BPPC) to describe CXR images that are represented in a feature vector of 1062 values. The extraction strategy maintains and recovers descriptive textural information of the TB, captured in 6 different directions of the CXR image, being invariant in the illumination and contrast of the CXR. The vector is then used to build a feed-forward neural network (FFNN) model capable of identifying and classifying TB cases. Our model experimented with three classification scenarios with CXR images from the TBX11K public dataset, and our results achieved exceptional performance, with greater than 99% accuracy, outperforming models from related work.

Training machine learning potentials for reactive systems: A Colab tutorial on basic models.

In the last several years, there has been a surge in the development of machine learning potential (MLP) models for describing molecular systems. We are interested in a particular area of this field - the training of system-specific MLPs for reactive systems - with the goal of using these MLPs to accelerate free energy simulations of chemical and enzyme reactions. To help new members in our labs become familiar with the basic techniques, we have put together a self-guided Colab tutorial (https://cc-ats.github.io/mlp_tutorial/), which we expect to be also useful to other young researchers in the community. Our tutorial begins with the introduction of simple feedforward neural network (FNN) and kernel-based (using Gaussian process regression, GPR) models by fitting the two-dimensional Müller-Brown potential. Subsequently, two simple descriptors are presented for extracting features of molecular systems: symmetry functions (including the ANI variant) and embedding neural networks (such as DeepPot-SE). Lastly, these features will be fed into FNN and GPR models to reproduce the energies and forces for the molecular configurations in a Claisen rearrangement reaction.

Recognizing Different Foot Deformities Using FSR Sensors by Static Classification of Neural Networks

Sensing insole systems are a promising technology for various applications in healthcare and sports. They can provide valuable information about the foot pressure distribution and gait patterns of different individuals. However, designing and implementing such systems poses several challenges, such as sensor selection, calibration, data processing, and interpretation. This paper proposes a sensing insole system that uses force-sensitive resistors (FSRs) to measure the pressure exerted by the foot on different regions of the insole. This system classifies four types of foot deformities: normal, flat, over-pronation, and excessive supination. The classification stage uses the differential values of pressure points as input for a feedforward neural network (FNN) model. Data acquisition involved 60 subjects diagnosed with the studied cases. The implementation of FNN achieved an accuracy of 96.6% using 50% of the dataset as training data and 92.8% using only 30% training data. The comparison with related work shows good impact of using the differential values of pressure points as input for neural networks compared with raw data.

Localization Process for WSNs with Various Grid-Based Topology Using Artificial Neural Network

Wireless Sensor Network (WSN) is a technology that can aid human life by providing ubiquitous communication, sensing, and computing capabilities. It allows people to be more able to interact with the environment. The environment contains many nodes to monitor and collect data. Localizing nodes distributed in different locations covering different regions is a challenge in WSN. Localization of accurate and low-cost sensors is an urgent need to deploy WSN in various applications. In this paper, we propose an artificial automatic neural network method for sensor node localization. The proposed method in WSN is implemented with network-based topology in different regions. To demonstrate the accuracy of the proposed method, we compared the estimated locations of the proposed feedforward neural network (FFNN) with the estimated locations of the deep feedforward neural network (DFF) and the weighted centroid localization (WCL) algorithm based on the strength of the received signal index. The proposed FFNN model outperformed alternative methods in terms of its lower average localization error which is 0.056m. Furthermore, it demonstrated its capability to predict sensor locations in wireless sensor networks (WSNs) across various grid-based topologies.