Feed Efficiency Related Traits Research Articles

Benchmarking machine learning and parametric methods for genomic prediction of feed efficiency-related traits in Nellore cattle

Genomic selection (GS) offers a promising opportunity for selecting more efficient animals to use consumed energy for maintenance and growth functions, impacting profitability and environmental sustainability. Here, we compared the prediction accuracy of multi-layer neural network (MLNN) and support vector regression (SVR) against single-trait (STGBLUP), multi-trait genomic best linear unbiased prediction (MTGBLUP), and Bayesian regression (BayesA, BayesB, BayesC, BRR, and BLasso) for feed efficiency (FE) traits. FE-related traits were measured in 1156 Nellore cattle from an experimental breeding program genotyped for ~ 300 K markers after quality control. Prediction accuracy (Acc) was evaluated using a forward validation splitting the dataset based on birth year, considering the phenotypes adjusted for the fixed effects and covariates as pseudo-phenotypes. The MLNN and SVR approaches were trained by randomly splitting the training population into fivefold to select the best hyperparameters. The results show that the machine learning methods (MLNN and SVR) and MTGBLUP outperformed STGBLUP and the Bayesian regression approaches, increasing the Acc by approximately 8.9%, 14.6%, and 13.7% using MLNN, SVR, and MTGBLUP, respectively. Acc for SVR and MTGBLUP were slightly different, ranging from 0.62 to 0.69 and 0.62 to 0.68, respectively, with empirically unbiased for both models (0.97 and 1.09). Our results indicated that SVR and MTGBLUBP approaches were more accurate in predicting FE-related traits than Bayesian regression and STGBLUP and seemed competitive for GS of complex phenotypes with various degrees of inheritance.

Genetic association between feed efficiency, growth, scrotal circumference, and carcass traits in Guzerat cattle.

The objective of this study was to estimate the genetic parameters for feed efficiency-related traits and their genetic correlations with growth, male fertility, and carcass traits using multi-trait analysis in Guzerat cattle. Further, it aimed to predict the direct and correlated responses for feed efficiency traits when selection was applied for growth, male fertility, and carcass traits. The evaluated traits were adjusted weight at 120 (W120), 210 (W210), 365 (W365), and 450days of age (W450), adjusted scrotal circumference at 365days of age (SC365) and at 450days of age (SC450), scrotal circumference, ribeye area (REA), backfat thickness (BFT), rump fat thickness (RFT), residual feed intake (RFI), and dry matter intake (DMI). The genetic parameters were obtained by the restricted maximum likelihood method (REML), using an animal model in multi-trait analyses. The heritability estimates for W120, W210, W365, W450, SC365, and SC450 varied from low to high (0.17 to 0.39). The carcass traits, REA, BFT, and RFT, displayed low to moderate heritability estimates, 0.27, 0.10, and 0.31, respectively. The heritability estimates for RFI (0.15) and DMI (0.23) were low and moderate, respectively. The RFI showed low genetic correlations with growth traits, ranging from - 0.07 to 0.22, from 0.03 to 0.05 for scrotal circumference, and from - 0.35 to 0.16 for carcass, except for DMI, which ranged from 0.42 to 0.46. The RFI and DMI presented enough additive genetic variability to be used as selection criteria in Guzerat breed genetic improvement program. Additionally, the response to selection for RFI would be higher when selection is performed directly for this trait. The selection for residual feed intake would not promote unfavorable correlated responses for scrotal circumference, carcass (yield and finish), and growth traits. Therefore, the selection for more efficient animals would not compromise the productive, reproductive, and carcass performance, contributing to reduce the production costs, increasing the profitability and sustainability of beef cattle production in tropical areas.

Estimates of genetic and phenotypic parameters for feeding behaviour and feed efficiency-related traits in Nelore cattle.

The objective of this study was to obtain (co)variance components, heritability, and genetic and phenotypic correlation estimates for feed efficiency and feed behaviour-related indicator traits. Further, it aimed to predict the direct and correlated responses for feed efficiency traits when selection was applied for feeding behaviour-related traits in Nelore cattle. Phenotypic records (n=4840) from 125 feed efficiency tests (RFI: Residual feed intake and DMI: Dry matter intake) carried out between 2011 and 2018 were considered in this study. Animals belonged to five farms located in two Brazilian geographical regions (Midwest and Southeast). Animals under similar management and environmental conditions in the feedlot were evaluated when they attained an average of 13.5± 4.15 months of age. Feed behaviour-related traits were also obtained, including meal criteria (MC), meal frequency (MF), average meal duration (AMD), meal duration (MD), average consumption per meal (ACM), and consumption rate (CR) through the GrowSafe System® electronic bunk system. The contemporary groups for all traits were composed of farm, management group, feed efficiency test, sex, and birth year. The (co)variance components were estimated using the restricted maximum likelihood method considering a multi-trait (n=8) animal model. The heritability estimates for RFI (0.23± 0.02), DMI (0.31± 0.02), MF (0.65± 0.02), AMD (0.29± 0.02), ACM (0.24± 0.02), MD (0.41± 0.02), MC (0.48± 0.02), and CR (0.42± 0.02) were moderate to high. The highest genetic correlation was obtained between CR and MD (-0.91 ± 0.04), MD and AMD (0.73± 0.03), CR and AMD (-0.68± 0.04), and RFI and DMI (0.81± 0.02). The highest phenotypic correlation was between ACM and AMD (0.76 ± 0.02), DMI and MD (0.77± 0.02), and DMI and RFI (0.77± 0.02). Genetic improvement for feed efficiency and feeding behaviour-related traits is feasible and the results obtained herein provided valuable information regarding the genetic background of Nelore feeding behaviour-related traits. The genetic association between feeding behaviour and feed efficiency-related traits suggested that animals spending less time feeding at a low feeding rate also had lower DMI and higher feed efficiency (RFI), and likely had lower energy maintenance requirements. The relative efficiency of selection showed that feeding behaviour-related traits were not adequate indicator traits to improve RFI and DMI. The DMI might be an effective selection criterion to improve RFI and reduce the herd's maintenance requirements.

Prune homolog 2 with BCH domain (PRUNE2) gene expression is associated with feed efficiency-related traits in Nelore steers.

Animal feeding is a critical factor in increasing producer profitability. Improving feed efficiency can help reduce feeding costs and reduce the environmental impact of beef production. Candidate genes previously identified for this trait in differential gene expression studies (e.g., case-control studies) have not examined continuous gene-phenotype variation, which is a limitation. The aim of this study was to investigate the association between the expression of five candidate genes in the liver, measured by quantitative real-time PCR and feed-related traits. We adopted a linear mixed model to associate liver gene expression from 52 Nelore steers with the following production traits: average daily gain (ADG), body weight (BW), dry matter intake (DMI), feed conversion ratio (FCR), feed efficiency (FE), Kleiber index (KI), metabolic body weight (MBW), residual feed intake (RFI), and relative growth ratio (RGR). The total expression of the prune homolog 2 (PRUNE2) gene was significantly associated with DMI, FCR, FE, and RFI (P < 0.05). Furthermore, we have identified a new transcript of PRUNE2 (TCONS_00027692, GenBank MZ041267) that was inversely correlated with FCR and FE (P < 0.05), in contrast to the originally identified PRUNE2 transcript. The cytochrome P450 subfamily 2B (CYP2B6), early growth response protein 1 (EGR1), collagen type I alpha 1 chain (COL1A1), and connective tissue growth factor (CTGF) genes were not associated with any feed efficiency-related traits (P > 0.05). The findings reported herein suggest that PRUNE2 expression levels affects feed efficiency-related traits variation in Nelore steers.

EEF1A1 transcription cofactor gene polymorphism is associated with muscle gene expression and residual feed intake in Nelore cattle.

Cis-acting effects of noncoding variants on gene expression and regulatory molecules constitute a significant factor for phenotypic variation in complex traits. To provide new insights into the impacts of single-nucleotide polymorphisms (SNPs) on transcription factors (TFs) and transcription cofactors (TcoF) coding genes, we carried out a multi-omic analysis to identify cis-regulatory effects of SNPs on these genes' expression in muscle and describe their association with feed efficiency-related traits in Nelore cattle. As a result, we identified one SNP, the rs137256008C > T, predicted to impact the EEF1A1 gene expression (β = 3.02; P-value = 3.51E-03) and the residual feed intake trait (β = -3.47; P-value = 0.02). This SNP was predicted to modify transcription factor sites and overlaps with several QTL for feed efficiency traits. In addition, co-expression network analyses showed that animals containing the T allele of the rs137256008 SNP may be triggering changes in the gene network. Therefore, our analyses reinforce and contribute to a better understanding of the biological mechanisms underlying gene expression control of feed efficiency traits in bovines. The cis-regulatory SNP can be used as biomarker for feed efficiency in Nelore cattle.

Meta-analysis across Nellore cattle populations identifies common metabolic mechanisms that regulate feed efficiency-related traits

BackgroundFeed efficiency (FE) related traits play a key role in the economy and sustainability of beef cattle production systems. The accurate knowledge of the physiologic background for FE-related traits can help the development of more efficient selection strategies for them. Hence, multi-trait weighted GWAS (MTwGWAS) and meta-analyze were used to find genomic regions associated with average daily gain (ADG), dry matter intake (DMI), feed conversion ratio (FCR), feed efficiency (FE), and residual feed intake (RFI). The FE-related traits and genomic information belong to two breeding programs that perform the FE test at different ages: post-weaning (1,024 animals IZ population) and post-yearling (918 animals for the QLT population).ResultsThe meta-analyze MTwGWAS identified 14 genomic regions (-log10(p -value) > 5) regions mapped on BTA 1, 2, 3, 4, 7, 8, 11, 14, 15, 18, 21, and 29. These regions explained a large proportion of the total genetic variance for FE-related traits across-population ranging from 20% (FCR) to 36% (DMI) in the IZ population and from 22% (RFI) to 28% (ADG) in the QLT population. Relevant candidate genes within these regions (LIPE, LPL, IGF1R, IGF1, IGFBP5, IGF2, INS, INSR, LEPR, LEPROT, POMC, NPY, AGRP, TGFB1, GHSR, JAK1, LYN, MOS, PLAG1, CHCD7, LCAT, and PLA2G15) highlighted that the physiological mechanisms related to neuropeptides and the metabolic signals controlling the body's energy balance are responsible for leading to greater feed efficiency. Integrated meta-analysis results and functional pathway enrichment analysis highlighted the major effect of biological functions linked to energy, lipid metabolism, and hormone signaling that mediates the effects of peptide signals in the hypothalamus and whole-body energy homeostasis affecting the genetic control of FE-related traits in Nellore cattle.ConclusionsGenes and pathways associated with common signals for feed efficiency-related traits provide better knowledge about regions with biological relevance in physiological mechanisms associated with differences in energy metabolism and hypothalamus signaling. These pleiotropic regions would support the selection for feed efficiency-related traits, incorporating and pondering causal variations assigning prior weights in genomic selection approaches.

Microbiability and microbiome-wide association analyses of feed efficiency and performance traits in pigs

BackgroundThe objective of the present study was to investigate how variation in the faecal microbial composition is associated with variation in average daily gain (ADG), backfat thickness (BFT), daily feed intake (DFI), feed conversion ratio (FCR), and residual feed intake (RFI), using data from two experimental pig lines that were divergent for feed efficiency. Estimates of microbiability were obtained by a Bayesian approach using animal mixed models. Microbiome-wide association analyses (MWAS) were conducted by single-operational taxonomic units (OTU) regression and by back-solving solutions of best linear unbiased prediction using a microbiome covariance matrix. In addition, accuracy of microbiome predictions of phenotypes using the microbiome covariance matrix was evaluated.ResultsEstimates of heritability ranged from 0.31 ± 0.13 for FCR to 0.51 ± 0.10 for BFT. Estimates of microbiability were lower than those of heritability for all traits and were 0.11 ± 0.09 for RFI, 0.20 ± 0.11 for FCR, 0.04 ± 0.03 for DFI, 0.03 ± 0.03 for ADG, and 0.02 ± 0.03 for BFT. Bivariate analyses showed a high microbial correlation of 0.70 ± 0.34 between RFI and FCR. The two approaches used for MWAS showed similar results. Overall, eight OTU with significant or suggestive effects on the five traits were identified. They belonged to the genera and families that are mainly involved in producing short-chain fatty acids and digestive enzymes. Prediction accuracy of phenotypes using a full model including the genetic and microbiota components ranged from 0.60 ± 0.19 to 0.78 ± 0.05. Similar accuracies of predictions of the microbial component were observed using models that did or did not include an additive animal effect, suggesting no interaction with the genetic effect.ConclusionsOur results showed substantial associations of the faecal microbiome with feed efficiency related traits but negligible effects with growth traits. Microbiome data incorporated as a covariance matrix can be used to predict phenotypes of animals that do not (yet) have phenotypic information. Connecting breeding environment between training sets and predicted populations could be necessary to obtain reliable microbiome predictions.

Selection criteria for frame score and its association with growth-, reproductive-, feed efficiency- and carcass-related traits in Nellore cattle

Context A frame score prediction equation developed specifically for Nellore cattle could be an auxiliary tool to improve mating decisions on the basis of feed resources and production-system objectives. Aims Estimate genetic parameters for frame by using a prediction equation developed for Nellore cattle and genetic associations between frame score (FRAME) and growth-, reproductive-, carcass- and feed efficiency-related traits, and five bioeconomic indexes. Methods Birth weight (BW), adjusted weight at 120 (W120), 210 (W210) and 450 (W450) days of age, adult weight (AW), age at first calving (AFC), probability of precocious calving (PPC30), stayability (STAY), accumulated cow productivity (ACP), adjusted scrotal circumference at 365 (SC365) and 450 (SC450) days of age, rib eye area (REA), subcutaneous backfat thickness (BFT), rump fat thickness (RFT), intramuscular fat percentage (IMF), residual feed intake (RFI) and dry-matter intake (DMI) were included in the analyses. Frame score was calculated using the multiple linear regression (MLR) prediction method. The estimation of genetic parameters was performed using a linear animal model, except for PPC30 and STAY, which were estimated through a threshold animal model. The correlated response in FRAME considering selection for growth-, reproductive-, carcass- and feed efficiency-indicator traits were obtained in the context of single-trait selection and a multiple-trait context. Key results Heritability estimated for FRAME was moderate (0.30 ± 0.09). Frame score showed moderate genetic correlations with growth traits, BW (0.51 ± 0.08), W120 (0.41 ± 0.07), W210 (0.35 ± 0.07) and W450 (0.29 ± 0.08). The genetic correlation estimates between FRAME and RFT was high (−0.84 ± 0.02), but low with ACP (0.25 ± 0.08) and RFI (0.10 ± 0.13). In the single-trait and multi-trait contexts, there was a lower correlated gain for FRAME when the selection was applied for traits commonly measured in beef cattle breeding programs. Conclusion Selection to increase growth traits would lead to an increase in frame size and herd nutritional requirements, and it would reduce the carcass fatness level and early heifer sexual precocity. FRAME could be an alternative trait to monitor calf birth weight. Implications Selection for FRAME is feasible, and the most suitable frame score value depends on the production system objectives and feed resources.

Genomic Selection and Genome-wide Association Study for Feed-Efficiency Traits in a Farmed Nile Tilapia (Oreochromis niloticus) Population.

Nile tilapia is a key aquaculture species with one of the highest production volumes globally. Genetic improvement of feed efficiency via selective breeding is an important goal, and genomic selection may expedite this process. The aims of this study were to 1) dissect the genetic architecture of feed-efficiency traits in a Nile tilapia breeding population, 2) map the genomic regions associated with these traits and identify candidate genes, 3) evaluate the accuracy of breeding value prediction using genomic data, and 4) assess the impact of the genetic marker density on genomic prediction accuracies. Using an experimental video recording trial, feed conversion ratio (FCR), body weight gain (BWG), residual feed intake (RFI) and feed intake (FI) traits were recorded in 40 full-sibling families from the GIFT (Genetically Improved Farmed Tilapia) Nile tilapia breeding population. Fish were genotyped with a ThermoFisher Axiom 65 K Nile tilapia SNP array. Significant heritabilities, ranging from 0.12 to 0.22, were estimated for all the assessed traits using the genomic relationship matrix. A negative but favourable genetic correlation was found between BWG and the feed-efficiency related traits; −0.60 and −0.63 for FCR and RFI, respectively. While the genome-wide association analyses suggested a polygenic genetic architecture for all the measured traits, there were significant QTL identified for BWG and FI on chromosomes seven and five respectively. Candidate genes previously found to be associated with feed-efficiency traits were located in these QTL regions, including ntrk3a, ghrh and eif4e3. The accuracy of breeding value prediction using the genomic data was up to 34% higher than using pedigree records. A SNP density of approximately 5,000 SNPs was sufficient to achieve similar prediction accuracy as the full genotype data set. Our results highlight the potential of genomic selection to improve feed efficiency traits in Nile tilapia breeding programmes.

Selection criteria for feed efficiency-related traits and their association with growth, reproductive and carcass traits in Nelore cattle

Context Livestock feed costs have a higher impact on the profitability of beef production systems and are directly related to feed efficiency. However, these traits are hard and have high costs to measure, reducing the availability of phenotypic records and reliability of genetic evaluations. Thus, the use of genomic information can increase the robustness of genetic studies that address them. Aims The aim of the present study was to estimate genetic parameters for feed efficiency, growth, reproductive and carcass traits in Nelore cattle and the correlated response among them, using genomic information. Methods Residual feed intake (RFI), dry-matter intake, feed conversion ratio, feed efficiency (FE), residual average daily gain (RG), residual feed intake and average daily gain (RIG), birthweight, weight at 120, 240, 365 and 450 days of age, scrotal circumference at 365 and 450 days of age, rib-eye area, backfat thickness and rump fat thickness were evaluated. The genetic parameters were estimated using the single-step genomic best linear unbiased prediction approach. Key results The FE-related traits showed low to moderate heritability ranging from 0.07 to 0.23. Feed efficiency-related traits showed low genetic correlations with reproductive (–0.24 to 0.27), carcass (–0.17 to 0.27) and growth (–0.19 to 0.24) traits, except for growth with dry-matter intake (0.32–0.56) and weight at 365 days of age with FE (–0.40). Conclusions The selection to improve growth, reproductive and carcass traits would not change RFI, RG and RIG. The choice of the most adequate selection criterion depends on the production system, that is, RFI might be used for low-input beef cattle systems, and RIG would be used for more intensive and without-any-dietary-restrictions beef cattle systems. Implications The estimates of heritability and genetic correlations suggest that genetic selection for feed efficiency using RFI, RG and RIG in Nellore cattle leads to higher genetic gain than does that using FE and feed conversion ratio without affecting other profitability traits.

PSXII-22 Genomic prediction accuracy for feed efficiency related traits using different pseudo-phenotypes, prediction and validation methods in Nellore cattle

Abstract The aim of the study was to evaluate prediction methods, validation approaches and pseudo-phenotypes for the prediction of the genomic breeding values of feed efficiency related traits in Nellore cattle. It used the phenotypic and genotypic information of 4,329 and 3,594 animals, respectively, which were tested for residual feed intake (RFI), dry matter intake (DMI), feed efficiency (FE), feed conversion ratio (FCR), residual body weight gain (RG), and residual intake and body weight gain (RIG). Six prediction methods were used: ssGBLUP, BayesA, BayesB, BayesCπ, BLASSO, and BayesR. Three validation approaches were used: 1) random: where the data was randomly divided into ten subsets and the validation was done in each subset at a time; 2) age: the division into the training (2010 to 2016) and validation population (2017) were based on the year of birth; 3) genetic breeding value (EBV) accuracy: the data was split in the training population being animals with accuracy above 0.45; and validation population those below 0.45. We checked the accuracy and bias of genomic value (GEBV). The results showed that the GEBV accuracy was the highest when the prediction is obtained with ssGBLUP (0.05 to 0.31) (Figure 1). The low heritability obtained, mainly for FE (0.07 ± 0.03) and FCR (0.09 ± 0.03), limited the GEBVs accuracy, which ranged from low to moderate. The regression coefficient estimates were close to 1, and similar between the prediction methods, validation approaches, and pseudo-phenotypes. The cross-validation presented the most accurate predictions ranging from 0.07 to 0.037. The prediction accuracy was higher for phenotype adjusted for fixed effects than for EBV and EBV deregressed (30.0 and 34.3%, respectively). Genomic prediction can provide a reliable estimate of genomic breeding values for RFI, DMI, RG and RGI, as to even say that those traits may have higher genetic gain than FE and FCR.

The impact of training on data from genetically-related lines on the accuracy of genomic predictions for feed efficiency traits in pigs

BackgroundMost genomic predictions use a unique population that is split into a training and a validation set. However, genomic prediction using genetically heterogeneous training sets could provide more flexibility when constructing the training sets in small populations. The aim of our study was to investigate the potential of genomic prediction of feed efficiency related traits using training sets that combine animals from two different, but genetically-related lines. We compared realized prediction accuracy and prediction bias for different training set compositions for five production traits.ResultsGenomic breeding values (GEBV) were predicted using the single-step genomic best linear unbiased prediction method in six scenarios applied iteratively to two genetically-related lines (i.e. 12 scenarios). The objective for all scenarios was to predict GEBV of pigs in the last three generations (~ 400 pigs, G7 to G9) of a given line. For each line, a control scenario was set up with a training set that included only animals from that line (target line). For all traits, adding more animals from the other line to the training set did not increase prediction accuracy compared to the control scenario. A small decrease in prediction accuracies was found for average daily gain, backfat thickness, and daily feed intake as the number of animals from the target line decreased in the training set. Including more animals from the other line did not decrease prediction accuracy for feed conversion ratio and residual feed intake, which were both highly affected by selection within lines. However, prediction biases were systematic for these cases and might be reduced with bivariate analyses.ConclusionsOur results show that genomic prediction using a training set that includes animals from genetically-related lines can be as accurate as genomic prediction using a training set from the target population. With combined reference sets, accuracy increased for traits that were highly affected by selection. Our results provide insights into the design of reference populations, especially to initiate genomic selection in small-sized lines, for which the number of historical samples is small and that are developed simultaneously. This applies especially to poultry and pig breeding and to other crossbreeding schemes.

Genome-wide association study of bone quality and feed efficiency-related traits in Pekin ducks

Feeding and bone traits are vital for breeding and reproduction in the commercial duck industry. In this study, we performed a genome-wide association study for feeding and bone traits in a population of 540 lean-type Pekin ducks, followed by genotyping-by-sequencing procedures. The genetic parameters of feeding and bone traits were also estimated using genomic information. In total, seventy-eight significant SNPs were determined, and eleven of them reached the genome-wide significant level for 7 traits except for body weight at 42-day old. A peak of genome-wide significant SNPs was detected on chromosome 2 for feed conversion ratio (P-value = 7.46E-11), and the top SNP (P-value = 2.23E-08) for bone-breaking strength was also obtained in the upstream of gene RAPGEF5. This study provided a list of novel markers and candidate genes associated with feeding and bone traits in Pekin ducks, which could contribute to the genetic selection in duck breeding.

A Genome-Wide Association Study on Feed Efficiency Related Traits in Landrace Pigs.

Feed efficiency (FE) traits in pigs are of utmost economic importance. Genetic improvement of FE related traits in pigs might significantly reduce production cost and energy consumption. Hence, our study aimed at identifying SNPs and candidate genes associated with FE related traits, including feed conversion ratio (FCR), average daily gain (ADG), average daily feed intake (ADFI), and residual feed intake (RFI). A genome-wide association study (GWAS) was performed for the four FE related traits in 296 Landrace pigs genotyped with PorcineSNP50 BeadChip. Two different single-trait methods, single SNP linear model GWAS (LM-GWAS) and single-step GWAS (ssGWAS), were implemented. Our results showed that the two methods showed high consistency with respect to SNP identification. A total of 32 common significant SNPs associated with the four FE related traits were identified. Bioinformatics analysis revealed eight common QTL regions, of which three QTL regions related to ADFI and RFI traits were overlapped. Gene ontology analysis revealed six common candidate genes (PRELID2, GPER1, PDX1, TEX2, PLCL2, ICAM2) relevant for the four FE related traits. These genes are involved in the processes of fat synthesis and decomposition, lipid transport process, insulin metabolism, among others. Our results provide, new insights into the genetic mechanisms and candidate function genes of FE related traits in pigs. However, further investigations to validate these results are warranted.

New insights into the associations among feed efficiency, metabolizable efficiency traits and related QTL regions in broiler chickens

BackgroundImproving the feed efficiency would increase profitability for producers while also reducing the environmental footprint of livestock production. This study was conducted to investigate the relationships among feed efficiency traits and metabolizable efficiency traits in 180 male broilers. Significant loci and genes affecting the metabolizable efficiency traits were explored with an imputation-based genome-wide association study. The traits measured or calculated comprised three growth traits, five feed efficiency related traits, and nine metabolizable efficiency traits.ResultsThe residual feed intake (RFI) showed moderate to high and positive phenotypic correlations with eight other traits measured, including average daily feed intake (ADFI), dry excreta weight (DEW), gross energy excretion (GEE), crude protein excretion (CPE), metabolizable dry matter (MDM), nitrogen corrected apparent metabolizable energy (AMEn), abdominal fat weight (AbF), and percentage of abdominal fat (AbP). Greater correlations were observed between growth traits and the feed conversion ratio (FCR) than RFI. In addition, the RFI, FCR, ADFI, DEW, GEE, CPE, MDM, AMEn, AbF, and AbP were lower in low-RFI birds than high-RFI birds (P < 0.01 or P < 0.05), whereas the coefficients of MDM and MCP of low-RFI birds were greater than those of high-RFI birds (P < 0.01). Five narrow QTLs for metabolizable efficiency traits were detected, including one 82.46-kb region for DEW and GEE on Gallus gallus chromosome (GGA) 26, one 120.13-kb region for MDM and AMEn on GGA1, one 691.25-kb region for the coefficients of MDM and AMEn on GGA5, one region for the coefficients of MDM and MCP on GGA2 (103.45–103.53 Mb), and one 690.50-kb region for the coefficient of MCP on GGA14. Linkage disequilibrium (LD) analysis indicated that the five regions contained high LD blocks, as well as the genes chromosome 26 C6orf106 homolog (C26H6orf106), LOC396098, SH3 and multiple ankyrin repeat domains 2 (SHANK2), ETS homologous factor (EHF), and histamine receptor H3-like (HRH3L), which are known to be involved in the regulation of neurodevelopment, cell proliferation and differentiation, and food intake.ConclusionsSelection for low RFI significantly decreased chicken feed intake, excreta output, and abdominal fat deposition, and increased nutrient digestibility without changing the weight gain. Five novel QTL regions involved in the control of metabolizable efficiency in chickens were identified. These results, combined through nutritional and genetic approaches, should facilitate novel insights into improving feed efficiency in poultry and other species.

Can We Observe Expected Behaviors at Large and Individual Scales for Feed Efficiency-Related Traits Predicted Partly from Milk Mid-Infrared Spectra?

Simple SummaryFeed efficiency and the sustainability of dairy farming are critical concerns for the dairy industry. Studying feed efficiency at a large scale would benefit cow breeding and management on the farm but is unrealistic in the current context due to practical issues. This study used the milk recording database to predict traits related to feed efficiency at large and individual scales in order to observe their behavior throughout the year, and by the lactation stage and parity. This could open new perspectives in the acquisition of traits related to body weight and dry matter intake to develop future selection programs aiming to improve the feed efficiency of dairy cows.Phenotypes related to feed efficiency were predicted from records easily acquired by breeding organizations. A total of 461,036 and 354,148 records were collected from the first and second parity Holstein cows. Equations were applied to the milk mid-infrared spectra to predict the main milk components and coupled with animal characteristics to predict the body weight (pBW). Dry matter intake (pDMI) was predicted from pBW using the National Research Council (NRC) equation. The consumption index (pIC) was estimated from pDMI and fat, and protein corrected milk. All traits were modeled using single trait test-day models. Descriptive statistics were within the expected range. Milk yield, pDMI, and pBW were phenotypically positively related (r ranged from 0.08 to 0.64). As expected, pIC was phenotypically negatively correlated with milk yield (−0.77 and −0.80 for the first and second lactation) and slightly positively correlated with pBW (0.16 and 0.07 for the first and second lactation). Later, parity cows seemed to have a better feed efficiency as they had a lower pIC. Although the prediction accuracy was moderate, the observed behaviors of studied traits by year, stage of lactation, and parity were in agreement with the literature. Moreover, as a genetic component was highlighted (heritability around 0.18), it would be interesting to realize a genetic evaluation of these traits and compare the obtained breeding values with the ones estimated for sires having daughters with reference feed efficiency records.

Potential Biomarkers for Feed Efficiency-Related Traits in Nelore Cattle Identified by Co-expression Network and Integrative Genomics Analyses.

Feed efficiency helps to reduce environmental impacts from livestock production, improving beef cattle profitability. We identified potential biomarkers (hub genes) for feed efficiency, by applying co-expression analysis in Longissimus thoracis RNA-Seq data from 180 Nelore steers. Six co-expression modules were associated with six feed efficiency-related traits (p-value ≤ 0.05). Within these modules, 391 hub genes were enriched for pathways as protein synthesis, muscle growth, and immune response. Trait-associated transcription factors (TFs) ELF1, ELK3, ETS1, FLI1, and TCF4, were identified with binding sites in at least one hub gene. Gene expression of CCDC80, FBLN5, SERPINF1, and OGN was associated with multiple feed efficiency-related traits (FDR ≤ 0.05) and were previously related to glucose homeostasis, oxidative stress, fat mass, and osteoblastogenesis, respectively. Potential regulatory elements were identified, integrating the hub genes with previous studies from our research group, such as the putative cis-regulatory elements (eQTLs) inferred as affecting the PCDH18 and SPARCL1 hub genes related to immune system and adipogenesis, respectively. Therefore, our analyses contribute to a better understanding of the biological mechanisms underlying feed efficiency in bovine and the hub genes disclosed can be used as biomarkers for feed efficiency-related traits in Nelore cattle.

Genetic architecture of quantitative traits in beef cattle revealed by genome wide association studies of imputed whole genome sequence variants: I: feed efficiency and component traits

BackgroundGenome wide association studies (GWAS) on residual feed intake (RFI) and its component traits including daily dry matter intake (DMI), average daily gain (ADG), and metabolic body weight (MWT) were conducted in a population of 7573 animals from multiple beef cattle breeds based on 7,853,211 imputed whole genome sequence variants. The GWAS results were used to elucidate genetic architectures of the feed efficiency related traits in beef cattle.ResultsThe DNA variant allele substitution effects approximated a bell-shaped distribution for all the traits while the distribution of additive genetic variances explained by single DNA variants followed a scaled inverse chi-squared distribution to a greater extent. With a threshold of P-value < 1.00E-05, 16, 72, 88, and 116 lead DNA variants on multiple chromosomes were significantly associated with RFI, DMI, ADG, and MWT, respectively. In addition, lead DNA variants with potentially large pleiotropic effects on DMI, ADG, and MWT were found on chromosomes 6, 14 and 20. On average, missense, 3’UTR, 5’UTR, and other regulatory region variants exhibited larger allele substitution effects in comparison to other functional classes. Intergenic and intron variants captured smaller proportions of additive genetic variance per DNA variant. Instead 3’UTR and synonymous variants explained a greater amount of genetic variance per DNA variant for all the traits examined while missense, 5’UTR and other regulatory region variants accounted for relatively more additive genetic variance per sequence variant for RFI and ADG, respectively. In total, 25 to 27 enriched cellular and molecular functions were identified with lipid metabolism and carbohydrate metabolism being the most significant for the feed efficiency traits.ConclusionsRFI is controlled by many DNA variants with relatively small effects whereas DMI, ADG, and MWT are influenced by a few DNA variants with large effects and many DNA variants with small effects. Nucleotide polymorphisms in regulatory region and synonymous functional classes play a more important role per sequence variant in determining variation of the feed efficiency traits. The genetic architecture as revealed by the GWAS of the imputed 7,853,211 DNA variants will improve our understanding on the genetic control of feed efficiency traits in beef cattle.

FABP1 and SLC2A5 expression levels affect feed efficiency-related traits

Improving the efficiency of production to reduce the environmental footprints is pivotal to the sustainability of livestock systems. Despite the advances in cattle feed efficiency (FE) measurement and identification of potential mechanisms involved, much is still unclear regarding the genetic and biological basis of this trait. Nevertheless, lipid and carbohydrate metabolism have been outlined as important in determining efficient and inefficient animals. To address the role of genes partaking in these processes and previously involved with residual feed intake (RFI), we carried out a liver expression profile in Nelore steers (n = 83). Six target genes (FABP1, FADS2, PPP1R26, RGS2, SLC2A5, and UCP2) were measured by qPCR analysis. A general linear mixed model approach was applied to associate them with dry matter intake (DMI), body weight (BW), metabolic BW (MBW, kg), DMI as a percentage of BW (DMI%BW), and average daily gain (ADG, kg/d). Residual feed intake (RFI), feed conversion ratio (FCR), feed efficiency (FE), Kleiber index (KI), and relative growth rate (RGR) were also evaluated. Our results support that increased expression of FABP1 gene was associated with enhanced values for RFI and DMI. Likewise, higher expression level of SLC2A5 was related to higher KI and RGR. There was no phenotypic correlation between RFI and ADG, BW, and MBW. The positive correlations between FABP1 and SLC2A5, and between FABP1 and FADS2 gene expression suggest a putative co-regulation affecting feed efficiency phenotypes.

A genome-wide association study for feed efficiency-related traits in a crossbred pig population

Feed efficiency (FE) is one of the most important traits in pig production. However, it is difficult and costly to measure it, limiting the collection of large amount of data for an accurate selection for better FE. Therefore, the identification of single-nucleotide polymorphisms (SNPs) associated with FE-related traits to be used in the genetic evaluation is of great interest of pig breeding programs for increasing the prediction accuracy and the genetic progress of these traits. The objective of this study was to identify SNPs significantly associated with FE-related traits: average daily gain (ADG), average daily feed intake (ADFI) and feed conversion ratio (FCR). We also aimed to identify potential candidate genes for these traits. Phenotypic information recorded on a population of 2386 three-way crossbreed pigs that were genotyped for 51 468 SNPs was used. We identified three loci of quantitative trait (QTL) regions associated with ADG and three QTL regions associated with ADFI; however, no significant association was found for FCR. A false discovery rate (FDR) ≤ 0.005 was used as the threshold for declaring an association as significant. The QTL regions associated with ADG on Sus scrofa chromosome (SSC) 1 were located between 177.01 and 185.47 Mb, which overlaps with the QTL regions for ADFI on SSC1 (173.26 and 185.47 Mb). The other QTL region for ADG was located on SSC12 (2.87 and 3.22 Mb). The most significant SNPs in these QTL regions explained up to 3.26% of the phenotypic variance of these traits. The non-identification of genomic regions associated with FCR can be explained by the complexity of this trait, which is a ratio between ADG and ADFI. Finally, the genes CDH19, CDH7, RNF152, MC4R, PMAIP1, FEM1B and GAA were the candidate genes found in the 1 Mb window around the QTL regions identified in this study. Among them, the MC4R gene (SSC1) has a well-known function related to ADG and ADFI. In this study, we identified three QTL regions for ADG (SSC1 and SSC12) and three for ADFI (SSC1). These regions were previously described in purebred pig populations; however, to our knowledge, this is the first study to confirm the relevance of these QTL regions in a crossbred pig population. The potential use of the SNPs and genes identified in this study in prediction models that combine genomic selection and marker-assisted selection should be evaluated for increasing the prediction accuracy of these traits in this population.