Fault Simulation Research Articles

Improving fault zones hydrodynamic characterization and simulation in karstified carbonate environments with GLM and IES invers methods

A quantitative and qualitative estimation of groundwater resources is a challenge for water management in the world, especially in carbonated and karstified aquifers. Within these aquifers, fault zones exert a significant influence on groundwater hydrodynamics and transport. Improving the management of this type of aquifer involves better assessment of its hydrodynamics properties. Sustainability and management solutions can be estimated through numerical modeling. In this study hydrodynamic parameter of fault zone in karstified carbonate environments are estimated from cross-hole pumping test data. These estimations allow the simulation and forecasting of fault zone flow and transport. For this purpose, a flow and transport model has been set up using MODFLOW6 and MODPATH7 codes. Inverse modeling of hydrodynamic parameters is performed with the PEST++ code suite, with both the Gauss-Levenberg-Marquardt algorithm (GLMA) and the iterative ensemble smoother (IES) which is a recent approach with few applications so far. Simulation, parameter estimation, and forecasts of drawdown and pollutant travel time through the fault zone have been first evaluated on a synthetic fault zone and are eventually applied to a real-world fault zone of interest in karst carbonate environments. A comprehensive comparison and analysis of GLMA and IES results are performed for parameter estimation, parametric and predictive uncertainties, ensuring a thorough assessment of results. The findings reveal satisfactory levels of uncertainty associated with the hydraulic conductivity field and both flow and transport forecasts. This approach demonstrates its ability to estimate the hydrodynamic parameter field with a high level of accuracy within the internal structures of the fault zone. This study constitutes valuable and reproducible insights into the simulation and forecasts of fault zones in karst carbonate aquifers. The findings are a step forward in groundwater flow and transport simulation of fault zones and provide relevant practical help for the management and protection of water resources in these critical areas of interest.

Faults-as-address simulation

Fault-as-address-simulation (FAAS) is a simulation mechanism for testing combinations of circuit line faults, represented by the bit addresses of element logical vectors. The XOR relationship between the test set T and the truth table L of the element forms a deductive vector for fault simulation, using truth table addresses or the logic vector bits. Addresses are used in the simulation matrix to mark those n-combinations of input faults detected at the element's output. The columns of the simulation matrix are treated as n-row addresses to generate an element output row via a deductive vector. There is no transport of input faults to the element output, Only the 1-signals written in the non-input row coordinates of the circuit simulation matrix. The simulation matrix is initially filled with 1-signals along the main diagonal. The line faults detected on the test set of circuits are determined by the inverse of lines good values, which have 1-values in the matrix row corresponding to the output circuit element. The deductive vector is obtained by the XOR-relations between the test set and logical vector in three table operations. The advantage of the proposed FAAS mechanism is the predictable complexity of the algorithm and memory consumption for storing data structures when simulating a test set.

Simulation of Faults in the Yeywa-Thaphaywa High Voltage Transmission Line using Fuzzy Logic

Faults in transmission networks frequently undermine the reliability and stability of electrical power supply, causing load shedding and posing risks to power system equipment. Effective fault classification is crucial to minimize power outages and ensure timely restoration. This study presents a fault classification method for transmission lines using fuzzy logic. The classification utilizes three-phase feeder currents, neutral current, and phase voltages as inputs to the Fuzzy Inference System (FIS). The proposed method accurately classifies the various types of faults in a high voltage transmission network, including line-to-ground fault, double line-to-ground fault, line-to-line fault, and three-phase faults. Numerous test cases demonstrate the technique's high accuracy. The simulations are carried out in MATLAB/SIMULINK using Sim Power Systems and the Fuzzy Logic Toolbox (MATLAB 2016a).

Study on the accurate detection method of full‐polarimetric ground‐penetrating radar faults in mines based on modified Yamaguchi decomposition

AbstractObtaining information on tectonic tendencies is a prerequisite for intelligent and accurate mining in mines. In the special mine environment, the co‐polarized ground‐penetrating radar can only identify the spatial location of faults, and it is difficult to analyse the inclination information of fault structures. This paper proposes a mine full‐polarimetric ground‐penetrating radar fault tendency detection method based on this. First, based on the stacking characteristics of the coal depositional, this paper analyses the propagation law of the pulse electromagnetic wave in the coal seam and puts forward the assumption of the overlapping echo reflection of the fault structure. The reasonableness of the fault reflection assumption is verified through a numerical simulation study. Second, based on the cutting relationship of the fault to the coal seam, we divided the reflection structure of the fault structure into plane scattering and dihedral angle scattering. We realized the mingled echoes’ decomposition using the improved Yamaguchi decomposition technique. To analyse the applicability of the modified Yamaguchi and Freeman decomposition methods in the identification of fault inclination, we use the upright fault simulation data for the discussion, and we find that the improved Yamaguchi decomposition method is more advantageous in the identification of fault inclination in the mine. The decomposition results based on the simulation data of fault models with different dip angles found that when the dip angle of the fault is less than 90°, the scattering of the fault structure is dominated by planar scattering and dihedral angle scattering; when the dip angle of the fault is greater than or equal to 90°, the scattering of the fault structure is dominated by planar scattering, and the scattering power of the dihedral angle model is zero. By analysing the effect of fault strike on the decomposition results, it is found that the fault strike angle has little effect on the identification of fault tendency. Finally, the application potential of this paper's method is tested by constructing complex numerical models and probing experiments. Therefore, the method proposed in this paper can solve the fault tendency identification under a thick coal seam.

Short-Circuit Fault Simulation of Tri-Axial High Temperature Superconducting Cable in Combined PSCAD-MATLAB

Short-Circuit Fault Simulation of Tri-Axial High Temperature Superconducting Cable in Combined PSCAD-MATLAB

Research on Fault Prediction of Power Devices in Rod Control Power Cabinets Based on BiTCN-Attention Transfer Learning Model

The Insulated Gate Bipolar Transistor (IGBT) is the key power device in the rod control power cabinet of nuclear power plants; its reliable operation is of great significance for ensuring the safe and economical operation of the nuclear power plants. Therefore, it is necessary to conduct fault prediction research on IGBT to achieve better condition-based maintenance and improve its operational reliability. However, power cabinets often operate under multiple, complex working conditions, so predicting IGBT faults from single working condition data usually has limitations and low accuracy. Its failure probability has an important relationship with the actual operating conditions of the cabinet. In order to improve the reliability and maintainability of the control power cabinet in nuclear power plants, this paper takes IGBTs in the rod control power cabinet as the object and makes full use of the data of IGBTs under multiple working conditions to carry out research on the cross-condition fault prediction of IGBTs under multiple-source working conditions. A transfer learning (TL) model based on a bidirectional time convolutional network (BiTCN) combined with attention was proposed to solve the problem of low accuracy of cross-operating fault prediction in a multi-source domain. Firstly, an IGBT fault simulation model was built to collect the life cycle state data of the module under different working conditions. Then, after pre-processing such as removing outliers, kernel principal component analysis (KPCA) was used to integrate all source domain data, obtain source domain characterization data, and train the BiTCN-attention model. Finally, the BiTCN-attention model trained in the source domain was transferred, and the model was fine-tuned according to the target domain data. Simulation results show that the accuracy of the proposed BiTCN-attention transfer learning prediction method can reach more than 99%, which is significantly better than that of the recurrent neural network transfer learning (RNN-TL) model, long short-term memory network transfer learning (LSTM-TL) model, gated cyclic unit transfer learning (GRU-TL) model, and time convolutional network transfer learning (TCN-TL) model. This method can not only reduce the inconsistency of fault characteristic values caused by changes in working conditions but also accurately predict the degradation trend when only early fault data are available, providing an effective solution for IGBT fault prediction across working conditions in multi-source domains.

Design and Implementation of a 7-Person Voting Device based on Quartus

As the complexity of digital system design continues to increase, efficient and precise decision support systems have become increasingly important. This paper presents the design and implementation of a 7-voter decision system based on Altera’s Quartus software. The voter is applied in the core decision-making process to ensure the accuracy and efficiency of decisions. The study begins by outlining the design principles of the 7-voter decision system, using a design philosophy that minimizes timing delays and optimizes hardware resource utilization. A complex majority voting logic circuit is implemented using high-level hardware description languages (VHDL/Verilog), ensuring the advanced nature and applicability of the voting circuit. In terms of the logical implementation of the voting circuit, the paper conducts an in-depth analysis of the optimization of combinational and sequential logic and standardizes the input and output to enhance the signal stability and the system’s resistance to interference. On the Quartus platform, the design process of the voting system is elaborated in detail, with careful consideration given to boundary conditions and hardware compatibility. The implementation of the voter has undergone rigorous simulation and testing. Strict parameter setting for simulations and waveform analysis confirm the correctness of the circuit, and fault simulation tests further confirm its reliability. Performance indicators such as response time and percentage of resource utilization have been quantitatively analyzed and meet the design objectives set beforehand. Overall, this research not only realizes a highperformance 7-voter decision system but also provides an effective case study for applications on the high-performance Quartus design platform. Future research can build on the current work to further optimize algorithms and hardware, explore the potential for the application of the voter in a broader range of fields, and adapt to the new features of the Quartus platform to achieve more powerful decision support functions.

Dynamic model-based intelligent fault diagnosis method for fault detection in a rod fastening rotor

A complete fault sample database is of great significance for the intelligent fault diagnosis method of rod fastening rotor. However, the lack of fault samples makes the fault diagnosis results unbelievable. To solve this issue, the dynamic model-based intelligent fault diagnosis method is established for a rod fastening rotor, and the fault sample database is enriched by numerical simulations. First, the lumped parameter model of the rod fastening rotor system is constructed and further updated using Euclidean Distance between measurement and numerical simulation of the intact system. Second, mathematical models of various fault types are incorporate into the updated model to obtain numerical simulation fault samples. Thirdly, the utilization of numerical simulation fault samples is severed as training data to the artificial intelligence (AI) models and the unknown measurement test samples will be finally classified. In this paper, Support Vector Machine, Random Forest, Bayesian Network and Decision Tree are selected as the typical AI models. Subsequently, the feasibility of classification is validated by the test bench of the rod fastening rotor system, and the problem of insufficient fault samples can be solved.

Fault Impulse Inference and Cyclostationary Approximation: A feature-interpretable intelligent fault detection method for few-shot unsupervised domain adaptation

With the advancement of intelligent detection for rotating machinery, numerous domain adaptation methods have been devised to transfer detection knowledge from one source domain working condition to another target domain working condition, involving extensive transfer scenarios including labeled, few-shot labeled, and unlabeled target conditions. Yet, learning from sparsely labeled signals in the source domain working condition and transferring to unlabeled target conditions, termed few-shot unsupervised domain adaptation (FUDA), is closer to reality but almost unexplored. Diverging from the intuition of combining existing transfer and few-shot learning technologies, this paper pioneers a novel single learning principle focusing on the cyclostationary mechanism (CT) of fault signals. In its implementation, named cyclically enhanced cyclostationary variational autoencoder (CCTVAE), the CT principle motivates the encoder to infer domain-shared representations with fault impulses, and the decoder approximates the cyclostationary structure containing the clear fault and working condition information. Then, auxiliary samples for few-shot expansion are generated by adjusting cyclic parameters of the posterior distribution of representations. Experimentally, CCTVAE achieves commendable results on simulated and real fault datasets. Even for compound faults, domain-shared representations and generated auxiliary signals manifest interpretable fault-indicating spectral lines in the frequency domain, underscoring method reliability.

Effect of tooth surface pitting on dynamic characteristics under mixed lubrication

The variation of tooth meshing stiffness and frictional characteristics caused by tooth surface pitting increases vibration and noise in the gear transmission system. Assuming a smooth tooth surface and a homogeneous material in studying the gear contact and dynamics is insufficient to reveal the evolution of dynamic contact performance caused by pitting faults. In the present study, we established a coupling analysis model for pitting faults to assess the effect of the tooth surface micro-morphology. The mesh stiffness and static transmission error of gears with randomly distributed pittings were calculated, and the vibration response of gears with different pitting degrees was resolved. Finally, the effectiveness of the applied dynamic response theory analysis was experimentally verified using the constructed pitting fault simulation test bench. The results indicate that pitting failure decreases the effective load-bearing capacity of gear teeth. The mesh stiffness gradually but significantly decreased with the pitting degree, also exhibiting fluctuating values. Pitting faults induced significant periodic features in the vibration response of gear transmission systems, showing complex sidebands around the meshing frequency and its harmonics.

Intelligent Fault Diagnosis in Industrial Machinery: Leveraging AI with LSTM Autoencoder for Enhanced Fault Detection

Machinery Fault Detection (MFD) is an important process in contemporary industrial systems, where it predicts possible physical failures before they lead to a serious problem. This uses multiple technologies to monitor machine statuses (algorithms, data gathering systems and sensors) Using a servo-motor driven actuator for deployment, the Locking Mechanism is pre-assembled into an OEM ATE and will enable predictive failure mode identification (via monitoring and warnings of operational parameters i.e., vibration, temperature or auditory signals in-built to MFD systems) leading to Prophylactic maintenance before critical bottlenecks can occur. The dataset we used in our study was collected from Kaggle and it is called the SpectraQuest Machinery Fault Simulator (MFS) Alignment-Balance-Vibration (ABVT). We used LSTM Autoencoder, KNN, SVM and DNN to analyzed the data. Our LSTM Autoencoder model was very accurate and achieved a precision, recall, accuracy and F-score of 99%. We worked on very large scale datasets. It will help the system detect faults and predict their evolution over time, so you save maintenance costs and increase production in your factory. More research on the practical efficiency of these models in real-time across different industrial settings can create a path towards improved and scalable MFD solutions.

Online Monitoring System of Electromechanical Transient Simulation Data of Distribution Network Based on Edge Computing

The current distribution network is developing toward the direction of information and intelligent distribution Internet of Things (IoT). In order to explore the online monitoring system for transient electromechanical simulation of distribution networks, this paper is based on the equivalent model of generator sets. Firstly, it describes the relevant theoretical knowledge of edge computing, designs the distribution IoT based on edge computing, and briefly introduces its network architecture. Secondly, based on the discrete-time domain equivalent model of generators, the electromechanical transient simulation distribution network is constructed by introducing the machine network division of the power network. Finally, the Western System Coordinating Council (WSCC)-3 units and 9 nodes are taken as an example, and simulation experiments are conducted under two fault simulation conditions to verify the effectiveness of the simulation model. The results show that under the two fault simulation conditions, the results of equivalent model simulation of generator terminal voltage and relative power angle change are like those of the Power System Analysis Software Package (PSASP). The changing trend of the two is similar and stable. After the PSASP results are stabilized at a value, the simulation results fluctuate extremely up and down the value. For example, under fault condition 1, the changing trend of the relative power angle of the No. 2 generator is first fluctuating and then becomes stable. After violent fluctuation, the relative power angle tends to be stable from about 20s to -12.35°. The result of PSASP software is stable at -12.35°. The transient electromechanical simulation of the generator equivalent model can provide some ideas for the online monitoring system of the distribution network.

Research on Graph Multi-Attention Neural Network for Power System Transient Stability Assessment

Abstract Diagnosing the stability of power grids based on artificial intelligence technology is a research trend. The existing artificial intelligence stability analysis methods rely on a large number of fault case data, while the graph neural network method ignores the correlation characteristics of nodes themselves and the correlation of long-distance nodes. In order to solve the problems, the graph multi-attention neural network (GMANN) was proposed. The self-attention, which characterizes the correlation between different state quantities of a single node, is proposed, firstly. Then, long-distance association attention, which represents the correlation of distant nodes in the power grid, was proposed. The long-distance correlation attention and the adjacent correlation attention in graph attention network are fused to form a global attention that reflects the global importance of the power grid. The channel attention that characterizes the importance of different pooling methods of graph convolutional network is extracted and used to obtain the importance of different convolution operations. Finally, based on the multi-source attention fusion strategy, global attention and channel attention are embedded in the graph attention neural network to form a multi-level evaluation model to achieve power grid stability evaluation efficiently guided by multiple attentions. The proposed GMANN is verified based on simulated fault cases obtained from the 10-machine 39-node system in New England. The results show that the accuracy of the GMANN can reach 97.34%, which is better than other methods. And the missed judgment rate of important indicators is significantly better than other methods.

Strengthening mechanisms in vanadium-microalloyed medium-Mn steels

In this work, the impact of adding vanadium, ranging from 0 to 2 wt%, on the microstructure and mechanical properties of as-cast medium manganese steel was explored. A dual phase microstructure consisting of martensite and retained austenite was observed in the 0 V, 0.05 V and 0.8 V conditions. The 2 V condition contained retained austenite, lath martensite, and δ-ferrite bands. The retained austenite fraction and prior austenite grain size initially increased at lean vanadium concentrations but significantly dropped at the highest vanadium concentration. The element distribution in the constituent phases was investigated in detail. Mn, C and Si partitioning to austenite was observed in the 0 V, 0.05 V and 0.8 V conditions. V and C segregation to the grain boundaries and significant grain refinement were evident in the 2 V condition. The findings also revealed that increasing the vanadium content led to an increase in the hardness of the steel. This assessment was validated by tensile testing, which showed an improvement in yield and tensile strength of the steel with increasing vanadium content, and were supported by reconstruction of the parent austenite grains employing martensitic structures. Finally, the influence of different strengthening mechanisms on the yield strength of as-cast, microalloyed medium-manganese steels was also discussed in terms of simulated stacking fault energy, as well as the quantitative contributions from solid solution, grain boundary, and precipitation strengthening mechanisms.

Predictive Voltage Control in Multi-Modular Matrix Converters under Load Variation and Fault Scenario

This paper presents a model predictive control (MPC) strategy to regulate output voltages in a multi-modular matrix converter topology for isolated loads. The converter system harnesses power from a six-phase permanent magnet synchronous generator (PMSG) to deliver sinusoidal voltages to a three-phase load, with LC filters positioned at the output of each MC module within the multi-modular scheme. The proposed MPC approach ensures that the output voltages remain within acceptable ranges of magnitude, phase, and frequency, even under load variations and system faults. This control strategy is particularly suitable for uninterruptible power supply systems, microgrids or other applications where voltage regulation is critical. Experimental studies validate the effectiveness of the control strategy under various load conditions, reference voltage changes, and simulated system fault scenarios. The results highlight the robustness and reliability of the proposed voltage control using the multi-modular matrix converter.

Effect of displacement loading rate on dynamic mechanical characteristics of fault stick-slip under constant normal stiffness conditions

The role of the displacement loading rate in fault activation and evolution is of utmost importance, yet most existing studies have primarily focused on its effect under constant normal load (CNL) conditions. However, in reality, the rock mass surrounding the earthquake source at the deep part of the fault provides normal stiffness conditions. Therefore, the influence of the displacement loading rate on the dynamic mechanical characteristics of fault stick-slip under constant normal stiffness (CNS) conditions remains uncertain. To bridge this research gap, we conducted an experimental investigation on simulated faults in granite under constant normal stiffness (CNS) conditions. Our analysis focused on the influence of the displacement loading rate on the spatial and temporal evolution of local stresses along the fault and the size of the fault nucleation zone. The findings revealed the following: Under the CNS condition, the equivalent shear stress is larger compared to the CNL condition, while the shear stress drop is smaller. The recovery of normal stress under CNS conditions depends more on the displacement loading rate. The nucleation location of the fault is influenced by the normal boundary conditions, with a larger nucleation zone observed in the CNS condition than in the CNL condition. In the early stage of friction, the local stress and stress drop of the fault exhibit a positive correlation with the displacement loading rate, whereas in the later stage, they display a negative correlation. Moreover, at the same location, the order of local stress drop rates for the fault is v3 > v1 > v2, where v1 represents the local normal stress drop rate, v2 represents the local shear stress drop rate and v3 represents the local friction coefficient drop rate. These research results contribute to a further understanding of the deep fault-slip mechanical behavior.

Investigation of operational settings, environmental conditions, and faults on the gas turbine performance

Abstract Gas turbine engines are complex mechanical marvels widely employed in diverse applications such as marine vessels, aircraft, power generation, and pumping facilities. However, their intricate nature renders them susceptible to numerous operational faults, significantly compromising their performance and leading to excessive emissions, consequently incurring stringent penalties from environmental regulatory bodies. Moreover, the deterioration of gas turbine performance is exacerbated by variations in working conditions based on operational settings and environmental conditions. Past studies have focused on certain working conditions that limit effectiveness in real-world applications where operational settings and environmental conditions vary during operations. The influence of these working conditions on the performance of gas turbines also needs to be assessed, as they can lead to different fault patterns resulting in unplanned maintenance, unnecessary maintenance costs, unsafe conditions and stringent penalties. This study uses the gas turbine simulation program to simulate a high-bypass turbofan engine inspired by Pratt & Whitney PW-4056, analysing the combined effects of operational settings and environmental conditions on engine performance while also incorporating simulations of common gas turbine faults like fouling and erosion in various locations and severities along the gas path. The model’s accuracy is confirmed by low mean absolute percentage errors of 0.004% of thrust at the cycle reference point and 0.15% and 0.28% at 2 km and 7 km altitudes, respectively, demonstrating the model’s robustness across varying operational scenarios. In conclusion, this research highlights the significant effects of operational settings and environmental factors on gas turbine performance, particularly impacting specific fuel consumption and thrust. The study reveals that operational settings and environmental factors significantly impact fuel consumption and thrust. Specifically, compressor fouling and low-pressure turbine erosion increase nitrogen oxide (NOx) emissions by 4.5% and 11.1%, while fouling of nozzle guide vanes and high-pressure turbine erosion raise unburned hydrocarbon by 10.0% and 20.2%, and carbon monoxide (CO) by 3.2% and 5.2%, respectively, compared to a healthy engine. These insights highlight the importance of component-specific degradation in influencing gas turbine performance and emissions.

Assessment of the Renewable Energy Consumption Capacity of Power Systems Considering the Uncertainty of Renewables and Symmetry of Active Power

The rapid growth of renewable energy presents significant challenges for power grid operation, making the efficient integration of renewable energy crucial. This paper proposes a method to evaluate the power system’s capacity to accommodate renewable energy based on the Gaussian mixture model (GMM) from a symmetry perspective, underscoring the symmetrical interplay between load and renewable energy sources and highlighting the balance necessary for enhancing grid stability. First, a 10th-order GMM is identified as the optimal model for analyzing power system load and wind power data, balancing accuracy with computational efficiency. The Metropolis–Hastings (M-H) algorithm is used to generate sample spaces, which are integrated into power flow calculations to determine the maximum renewable energy integration capacity while ensuring system stability. Short-circuit ratio calculations and N-1 fault simulations validate system robustness under high renewable energy integration. The consistency between the results from the M-H algorithm, Gibbs sampling, and Monte Carlo simulation (MCS) confirms the approach’s accuracy.

Vector synthesis of fault testing map for logic

Vector synthesis of fault testing (simulation) map for logic is proposed, which without simulation allows to determine of all faults detected on test sets, as well as determining test sets to detect specified faults. For synthesis, a superposition of smart data structures is used, containing: a deductive matrix D, as a derivative of the logical vector L, test truth table T, and fault truth table F. The deductive matrix is seen as the gene of functionality and base of fault simulation mechanism to solve all the problems of testing and verification. In the matrix synthesis, an axiom is used: all the mentioned tables are identical in shape to each other and always interact with each other convolutionally T⊕L⊕F=0. A universal deductive reversing converter “test-faults” and “faults-test” for logical functionalities of any dimension is proposed. Converter functions: fault simulation on test sets T→F and synthesis of test sets F→T to detect the specified faults. The converter can be used as a test generation and fault simulation service for IP-core system-on-chip (SoC) under the IEEE 1500 SECT standard. Based on the deductive matrix, a fault testing map for logic is built, where each test set is matched with the logic-detected faults of the input lines.

Mechanical Energy Dissipation During Seismic Dynamic Weakening in Calcite‐Bearing Faults

AbstractEarthquakes are frictional instabilities caused by the shear stress decrease, that is, dynamic weakening, of faults with slip and slip rate. During dynamic weakening, shear stress depends on slip, slip rate, and temperature, according to constitutive laws governing the earthquake rupture process. In the laboratory, technical limitations in measuring temperature during frictional instabilities inhibit the investigation and interpretation of shear stress evolution. Here we conduct high velocity friction experiments on calcite‐bearing simulated faults, both on bare‐rock and on gouge samples, at 20–30 MPa normal stress, 1–6 m/s slip rate and 1–20 m total slip. Seismic slip pulses are reproduced by imposing boxcar and regularized Yoffe slip rate functions. We measured, together with shear stress, slip, and slip rate, the temperature evolution on the fault by employing an innovative two‐color fiber optic pyrometer. The comparison between modeled and measured temperature reveals that for calcite‐bearing faults the heat sink caused by decarbonation reaction controls the temperature evolution. In bare‐rocks, energy is dissipated as frictional heat, and temperature increase is buffered by the heat sink of the calcite decarbonation reaction. In gouges, energy is dissipated as frictional heat and for plastic deformation processes, balanced by the heat sink caused by the decarbonation reaction enhanced by the mechanochemical effect. Our results suggest that in calcite‐bearing rocks, a common fault zone material for earthquake sources in the continental crust at shallow depth, the type of fault materials (bare‐rocks vs. gouges) controls the energy dissipation during seismic slip.