Fast Reaction Research Articles

Strategies for Mitigating Phosphoric Acid Leaching in High-Temperature Proton Exchange Membrane Fuel Cells.

High-temperature proton exchange membrane fuel cells (HT-PEMFCs) have become one of the important development directions of PEMFCs because of their outstanding features, including fast reaction kinetics, high tolerance against impurities in fuel, and easy heat and water management. The proton exchange membrane (PEM), as the core component of HT-PEMFCs, plays the most critical role in the performance of fuel cells. Phosphoric acid (PA)-doped membranes have showed satisfied proton conductivity at high-temperature and anhydrous conditions, and significant advancements have been achieved in the design and development of HT-PEMFCs based on PA-doped membranes. However, the persistent issue of HT-PEMFCs caused by PA leaching remains a challenge that cannot be ignored. This paper provides a concise overview of the proton conduction mechanism in HT-PEMs and the underlying causes of PA leaching in HT-PEMFCs and highlights the strategies aimed at mitigating PA leaching, such as designing crosslinked structures, incorporation of hygroscopic nanoparticles, improving the alkalinity of polymers, covalently linking acidic groups, preparation of multilayer membranes, constructing microporous structures, and formation of micro-phase separation. This review will offer a guidance for further research and development of HT-PEMFCs with high performance and longevity.

Stabilization effect of nano-SiO2@iron-phosphorus on ferrallisols, calcareous soil and organic soil heavily polluted by heavy metals: A fast reaction curing stabilization process

The remediation of soil pollution by heavy metals (HMs) presents a significant challenge in environmental restoration. Stabilization remediation technology has proven effective in treating HMs contaminated soil. However, its development is constrained by drawbacks such as slow reaction kinetics and low adsorption capacity. This research synthesized a nano-SiO2@iron‑phosphorus (FPOH) material by SiO32− encapsulating the iron-phosphate precipitate obtained from Fe ion and phosphate. In addition, this research applied this material to ferrallisols, calcareous soils and organic soils with three different levels of high pollution by Cd, Pb, Cu and Zn. The experimental results indicate that all experimental soils stabilized rapidly within 1 day and met the requirements of remediation engineering standards (ChinaMEE HJ 1282-2023). Analysis of the possible mechanisms suggests that the FPOH material effectively fills voids with phosphate mineral formation, preventing the secondary release of HMs. During the stabilization process, FPOH involves the adsorption of free ions and small organic molecules in the soil, which does not affect its high reactivity. The development and utilization of FPOH offer valuable insights for soil stabilization remediation.

Real-Time fMRI Neurofeedback Training of Selective Attention in Older Adults.

Selective attention declines with age, due to age-related functional changes in dorsal anterior cingulate cortex (dACC). Real-time functional magnetic resonance imaging (rtfMRI) neurofeedback has been used in young adults to train volitional control of brain activity, including in dACC. For the first time, this study used rtfMRI neurofeedback to train 19 young and 27 older adults in volitional up- or down-regulation of bilateral dACC during a selective attention task. Older participants in the up-regulation condition (experimental group) showed greater reward points and dACC BOLD signal across training sessions, reflective of neurofeedback training success; and faster reaction time and better response accuracy, suggesting behavioral benefits on selective attention. These effects were not observed for older participants in the down-regulation condition (inverse condition control group), supporting specificity of volitional dACC up-regulation training in older adults. These effects were, unexpectedly, also not observed for young participants in the up-regulation condition (age control group), perhaps due to a lack of motivation to continue the training. These findings provide promising first evidence of functional plasticity in dACC in late life via rtfMRI neurofeedback up-regulation training, enhancing selective attention, and demonstrate proof of concept of rtfMRI neurofeedback training in cognitive aging.

Development of L1-L2 naming skills in a monolingual context: Evidence from children and adolescents

Adolescence is marked by significant developmental changes that can influence language processing and control. This study aimed to uncover developmental differences in language co-activation and control in unbalanced Spanish (L1)-English (L2) bilinguals. Children and adolescents attending bilingual schools within a L1 monolingual context completed a picture-naming task including cognates and non-cognates nouns, with collection of behavioral and ERP data. The study consistently found a cognate facilitation effect (CFE) in L2, evident in enhanced accuracy, faster reaction times, and reduced N400 negativity for cognates in comparison with no-cognate nouns. However, in L1, CFE was only observed in the N400 component, indicating weaker transfer from L2 to L1. Additionally, children exhibited greater N200 negativity when naming cognates in L1, while adolescents showed no N200 modulations, suggesting differences in frontal control region involvement and potential differences in control strategies. Language co-activation appears independent of maturation, while language control depends on development.

Crystal Step‐Induced Uniform and Rapid Deposition on Zinc Anodes

AbstractAqueous Zn‐ion batteries have emerged as promising candidates for large‐scale energy storage owing to their high safety and low cost. However, dendrite growth and side reactions compromise the stability of the Zn anode in practical applications. Here, a novel Zn anode featuring well‐designed crystal steps along the (002) facets, referred to as Step‐Zn is introduced. The intersections of the (002) and (100) planes in these crystal steps create preferential adsorption sites for Zn2⁺ ions, promoting initial electro‐epitaxial growth of Zn that uniformly covers the crystal steps. This process effectively regulates subsequent Zn deposition, ensuring fast reaction kinetics and smooth morphology without dendrite formation. Consequently, the unique Step‐Zn anode exhibits excellent cycle life over 6000 times at 3 mA cm−2 and low greatly reduced polarization voltage under high areal currents and capacities. Integrated with activated carbon (AC) cathode, the Step‐Zn||AC full cell demonstrates excellent durability over 10 000 cycles at 5 A g−1. This work offers valuable insights into controlling Zn deposition modes by engineering the surface microstructure of Zn anodes with greatly extended cycling stability.

Simultaneous Tailoring of Chemical Composition and Morphology Configuration in Metal Hexacyanoferrate for Ultrafast and Durable Sodium‐ion Storage

Metal hexacyanoferrates (MHCFs) with adjustable composition and open framework structures have been considered as intriguing cathode materials for sodium‐ion batteries (SIBs). Exploiting MHCFs with ultrafast and durable sodium storage capability as well as comparable capacity is always a goal that many investigators pursue, but remains challenging. Herein, simultaneous tailoring of chemical composition and morphology configuration is carried out to design a hollow monoclinic high‐entropy MHCF (HMHE‐HCF) assembled by nanocubes for the first time to realize the objective. The “cocktail effect” of high‐entropy construction, rich sodium content of monoclinic phase, and unique hollow structure endow HMHE‐HCF cathode with fast reaction kinetics and energetically stable performance during continuous charging/discharging processes. As a result, the HMHE‐HCF cathode demonstrates superior rate performance up to an ultra‐high rate of 100 C (71.1% retention to 0.1 C), and remarkable cycling stability with a capacity retention of 77.8% over 25,000 cycles at 100 C, outperforming most reported sodium‐ion cathodes. Further, the HMHE‐HCF//hard carbon full‐cell delivers capacities of 99.0 and 82.3 mAh g–1 at 0.1 C and 10 C, respectively, and retains 98.1% of the initial capacity after 1,600 cycles at 5C, demonstrating its potential application for sodium‐ion storage.

Mg2+ - Ca2+ chelating citric acid crosslinked gelatin, a bone adhesive composed of hydroxyapatite and calcined dolomite: Physicochemical characteristics and in-vitro biological activity

Hydroxyapatite-based bone adhesives have strong bond strength and good adsorbability, however, they also have some disadvantages such as poor mechanical strength, fast curing reaction rate and high exothermic strength, which limit their wide application in bone tissue engineering. In this study, hydroxyapatite-based bone adhesive was prepared by solid-liquid blended crosslinking followed by heating. The prepared bone adhesive has two components: (i) is a mineral composed of calcined dolomite and montmorillonite and (ii) is organic composite composed of citric acid and gelatine. The optimum solid-liquid ratio (0.50 g/mL) of the bone adhesive was determined based on the bond strength of nano-hydroxyapatite/calcined dolomite/citric acid/gelatin system. The best physicochemical properties of the bond adhesive were obtained when the composition of the bone adhesive was as follows: 20 wt% citric acid, 17 wt% gelatin and 12 wt% calcined dolomite. The acquired curing time of bone adhesive was 10.5 min, comparable to the necessity for surgery (5–30 min); moreover, the adhesive strength and compressive strength of the bone adhesive were 12.18 MPa and 9.36 MPa respectively, obtained after being placed in the air for 168 h; besides, the porosity (16.8 %) was found quite suitable. Upon this, a certain amount of montmorillonite was added with calcined dolomite to prepare bone adhesive, resulting reduction in the adhesive strength (10.19 MPa) and compressive strength (7.109 MPa), but improved the biocompatibility of the system. The absorbency of the hydroxyapatite-based bone adhesives in deionized water and Tris-HCl buffer solution was found to be 27.19 % and 18.68 %, respectively, ascertaining that such bone adhesives are efficient in absorbing certain blood and tissue fluid in the biological body and promoting the absorption of required nutrients in the process of bone repair. In addition, the formation of osteoid apatite in the In-vitro study, proved by FTIR and EDAX analysis, rationalized for improving the osteogenic activity. Furthermore, after 56 days of immersion in the Tris-HCl buffer solution, the weight loss rate of the bone adhesive reached up to 42.73 %, indicating that the bone adhesive had satisfactory degradation performance. Finally, in the cytotoxicity test, the survival rate of mouse precranial bone cells was found to be greater than 80 % after adding the prepared bone adhesive, demonstrating its sufficient biocompatibility.

Fabrication of V2O3-TiO2-rGO ternary heterojunction composite to enhance the hydrogen storage performance of MgH2

The application prospects of MgH2 as a potential solid hydrogen storage material are limited by its stable thermodynamic properties and slow hydrogenation/dehydrogenation kinetics. In this study, a ternary heterogeneous composite material V2O3-TiO2-rGO (V-T-rGO) was synthesized using the ultrasonic hydrothermal method and doped into MgH2 through ball milling to improve its hydrogen storage performance. The experimental results demonstrated that the MgH2 + V-T-rGO samples exhibit superior hydrogen storage properties compared with single-doped V2O3, TiO2, rGO or V-T materials. Specifically, it can uptake hydrogen at room temperature, and adsorbs 5.00 wt% H2 in just 4 min at 150 °C, and releases 5.87 wt% H2 within 6 min at 325 °C, demonstrating a faster reaction rate and successful hydrogen absorption. Additionally, the hydrogenation/dehydrogenation activation energies of MgH2 + V-T-rGO samples are measured at 27.1/72.3 kJ·mol−1, representing a reduction of 51.2/59.2 kJ·mol−1 compared to MgH2 alone. Mechanistic analysis revealed that the multiphase composite system produced synergistic catalytic effects, providing abundant active sites and hydrogen diffusion channels to enhance the hydrogen storage performance of MgH2. This study presents an innovative approach for constructing transition metal oxide heterostructured materials and holds significant reference value for applications in the field of hydrogen storage.

In situ hydrothermal growth of Ni-based hydrogen phosphate polyhedrons on Ni foam for efficient hydrogen evolution reaction

Developing a cost-effective and stable electrocatalyst is the key to achieve the large-scale applications of water electrolysis to produce green hydrogen. Herein, an in situ hydrothermal growth strategy was put forward to prepare a novel self-supporting electrode, that is, Ni-based hydrogen phosphate polyhedrons supported on 3D Ni foam. This electrode was composed of crystalline (Ni(H2PO4)2·2H2O, Ni(H3P2O7)2·2H2O), and amorphous phase in which NiO nanoparticles formed. The amorphous phase connected polyhedrons to the Ni foam substrate, forming multifarious heterogeneous interfaces. Such a structure possessed large number of active sites, favored the fast reaction kinetics and electron transport rate, synergistically resulting in a superior alkaline HER performance. In alkaline electrolyte, the electrode only needed a small overpotential of 69 mV to reach the current density of 10 mA cm−2 with a small Tafel slope of 56 mV dec−1, and exhibited a good stability at the current density of 100 mA cm−2 for 50 h. This in situ hydrothermal growth strategy opened up a new route to green synthesis of cost-effective and stable 3D heterostructured self-supporting electrode for water-splitting.

Brief adaptation leads to faster reaction times in a face search task

Brief adaptation leads to faster reaction times in a face search task

Copolymerization of ethylene and isoprene initiated by metallocene catalyst

In this study, we explore the dynamic nature of metallocene catalysts during ethylene/isoprene E/IP) copolymerization, with a focus on the influence of various reaction parameters. Challenges, why do olefinic catalysts show lower activity and molecular weight (Mw) at higher temperatures and low activity with higher diene content? Firstly, we investigate the observed phenomena of decreased catalyst activity and Mw at elevated temperatures using 1.25 μmole of the metallocene. Notably, a substantial increase in active sites from 30 °C to 40 °C, reaching a peak of 89 %. Surprisingly, further temperature increments lead to a noticeable decline in active sites. At 30 °C, the active site primarily engages in the insertion of IP through 3,4 connections, with no detectable cis-1,4 or trans-1,4 connections, which suggests a lack of stereoselectivity at this temperature. At 40–50°C, cis/trans-1,4 connections and active sites are approaching a higher level. This implies a reduction in chain transfer reactions, making catalytic active sites more favorable to cis/trans-1,4 connections. Secondly, we observe a remarkable impact of IP concentration in the E/IP copolymers, active centers, and activity show stability when the amount of IP was 0.116–0.48 mol/L and then started to decline when the amount of IP 0.96 mol/L, indicating a threshold beyond which deactivation occurs. Increasing IP concentration not only reduces activity and active sites but also fails to reactivate dormant polyethylene sites. The Mw and active centers of copolymers progressively decrease with elevated IP concentration, suggesting a faster chain transfer reaction with IP compared to E.

The impact of an exercise and sport intervention on cognitive function and pain among forcibly displaced individuals at risk for PTSD: a secondary analysis of the SALEEM randomized controlled trial

BackgroundIn response to the global scope of forced displacement, international organizations highlight the need of scalable solutions to support individuals’ health and integration into host societies. Exposure to high mental and physical stress perceived before, during, and after displacement can impair functional capabilities, essential for adapting to a new environment. This secondary analysis examined the impact of an exercise and sport intervention on cognitive function and pain severity among individuals living in a refugee camp in Greece.MethodsWe implemented a randomized controlled trial involving n = 142 (52.8% women) forcibly displaced individuals from Southwest Asia and Sub-Saharan Africa. Participants were randomly assigned to a waitlist or a 10-week co-designed exercise and sport intervention with a 1:1 allocation rate between groups and sexes. Assessments at baseline and follow-up included the Flanker task, the Oddball paradigm, pain severity via visual analog scales, and the Åstrand-Rhyming indirect test of maximal oxygen uptake. We analyzed the intervention effects using structural equation modeling.ResultsOur findings did not indicate a direct intervention effect on cognitive function or pain (p ≥ .332). However, the intervention group significantly improved cardiorespiratory fitness, ß = .17, p = .010, which was associated with faster reaction times in cognitive tasks, ß = − .22, p = .004. Moreover, there was some evidence that adherence might be linked to reduced pain severity, ß = − .14, p = .065.ConclusionsExercise and sport did not directly impact cognitive function and pain severity among a sociodemographically diverse sample living in a refugee camp, suggesting the need for complementary measures. Nevertheless, our results indicate that improvements in cardiorespiratory fitness benefit aspects of attention.Trial registrationThe study was approved by the local ethics committee of the University of Thessaly (no. 39) and registered prospectively on February 8, 2021 at the ISRCTN registry (no. 16291983).

B - 98 Effect of Insomnia on Sustained Attention in Post-Acute Sequelae of COVID-19 (PASC)

Abstract Objective Insomnia symptoms are prevalent among individuals with post-acute sequelae of COVID-19 (PASC) and may, to some extent, reflect virally-mediated neurological changes. Mood disturbance and cognitive impairment, including weaknesses in attention and processing speed, are also observed. There is limited research examining the association between insomnia, mood, and cognition in PASC, which we aimed to elucidate. Methods Patients were 69 consecutive adults (M-age = 46.5 ± 11.6 years; M-education = 15.03 ± 2.66 years; M-TOPF-SS = 104.6 ± =12.58; 69.6% female; 95.7% White) seen for neuropsychological evaluation in a PASC clinic. They completed the Conners Continuous Performance (CPT-3), Symbol Digit Modalities Test, Insomnia Severity Index, Beck Anxiety Inventory, and Beck Depression Inventory as part of a larger battery of measures. Cognitive performance was compared between patients with elevated versus non-elevated insomnia symptoms. Models were also adjusted for mood symptoms via MANCOVA. Results Group demographics were unrelated to mood, sleep, and cognition. MANOVA yielded a significant main effect (Wilks’ Λ = 0.656, F(7,61) = 4.57, p < 0.001), with more CPT-3 commission errors (p < 0.001, ηp2 = 0.247), faster reaction times (p = 0.012, ηp2 = 0.090), and more variable response speed consistency (p = 0.027, ηp2 = 0.071) in those with insomnia. Commission errors and reaction times remained significant after covarying for mood. The insomnia group displayed slower responses across block changes (p = 0.038, ηp2 = 0.065) when mood was controlled. Conclusion Patients with PASC with elevated insomnia symptoms showed greater inaccuracy and more variable reaction times on a sustained attention task, in a pattern suggesting impulsivity, even after controlling for mood symptoms. Findings suggest that improving sleep may ameliorate attention deficits in persons with PASC.

Nickel-Iron Layered Double Hydroxides/Nickel Sulfide Heterostructured Electrocatalysts on Surface-Modified Ti Foam for the Oxygen Evolution Reaction.

Electrochemical approaches for generating hydrogen from water splitting can be more promising if the challenges in the anodic oxygen evolution reaction (OER) can be harnessed. The interface heterostructure materials offer strong electronic coupling and appropriate charge transport at the interface regions, promoting accessible active sites to prompt kinetics and optimize the adsorption-desorption of active species. Herein, we have designed an efficient multi-interface-engineered Ni3Fe1 LDH/Ni3S2/TW heterostructure on in situ generated titanate web layers from the titanium foam. The synergistic effects of the multi-interface heterostructure caused the exposure of rich interfacial electronic coupling, fast reaction kinetics, and enhanced accessible site activity and site populations. The as-prepared electrocatalyst demonstrates outstanding OER activity, demanding a low overpotential of 220 mV at a high current density of 100 mA cm-2. Similarly, the designed Ni3Fe1 LDH/Ni3S2/TW electrocatalyst exhibits a low Tafel slope of 43.2 mV dec-1 and excellent stability for 100 h of operation, suggesting rapid kinetics and good structural stability. Also, the electrocatalyst shows a low overpotential of 260 mV at 100 mA cm-2 for HER activity. Moreover, the integrated electrocatalyst exhibits an incredible OER activity in simulated seawater with an overpotential of 370 mV at 100 mA cm-2 and stability for 100 h of operation, indicating good OER selectivity. This work might benefit further fabricating effective and stable self-sustained electrocatalysts for water splitting in large-scale applications.

Complex Infection-Control Measures with Disinfectant Switch Help the Successful Early Control of Carbapenem-Resistant Acinetobacter baumannii Outbreak in Intensive Care Unit.

A carbapenem-resistant Acinetobacter baumannii (CRAB) outbreak in an intensive care unit (ICU) was contained by an improved infection-control measure that included a disinfectant policy. In our retrospective cohort study, we describe the epidemiological investigations and infection-control measures during this outbreak. Descriptive analysis was used to summarize patient demographics, neurological diseases, surgical treatment, underlying diseases, infection, and outcomes. In December 2023, two CARB-positive patients were observed in the ICU, and four more patients became CRAB-positive in January. During this outbreak, there was an overlap of hospitalization periods among the CRAB-positive patients, and CRAB was isolated from the environment; the isolated CRAB strain was identical. Infection-control measures, including hand hygiene, contact precautions and isolation, surveillance, decolonization, environmental cleaning, and disinfection, were reviewed and modified. The aim of this study was to examine the molecular background of the effectiveness of the disinfectant shift used during successful outbreak control. Experiments were carried out to study the phenotypic sensitivity and genetic background of different disinfectant agents. A thorough analysis of the detected CRAB strain included whole-genome sequencing (WGS), investigation of the qacE and qacEΔ1 genes' relative expression by qPCR after exposure to different disinfectant solutions, as well as an analysis of biofilm formation. WGS analysis of the CRAB strain identified that an ST2 high-risk clone was responsible for the outbreak, which produced OXA-83 and ADC-30 beta-lactamases; in addition, qacE and qacEΔ1 genes were also detected, which confer resistance to disinfectants containing quaternary ammonium compounds (QACs). A qPCR analysis demonstrated that after exposure to different disinfectants, the gene expression levels of qacE and qacEΔ1 increased and correlated with concentrations of QACs of disinfectants. During the outbreak, the standard-of-care QAC-based disinfectant was changed to a mainly alcohol-based agent in the ICU, which contributed to the successful control of this outbreak, and no additional patients were identified with CRAB. We conclude that continuous surveillance and hand hygiene training combined with fast identification and reaction to new cases, as well as an in-depth analysis of multidrug-resistant outbreak strains and investigation of their disinfectant tolerance/resistance during an outbreak, are essential to effectively control the spread of nosocomial pathogens. The smart policy of disinfectant agent selection played a crucial role in controlling the outbreak and ensuring patient safety in the ICU.

Effect of thermochemical treatment of sewage sludge on its phosphorus leaching efficiency: Insights into leaching behavior and mechanism

Thermochemical conversion, including hydrothermal processing, pyrolysis and incineration, has become a promising technology for sewage sludge (SS) treatment and disposal. Furthermore, acid leaching is considered as an effective method to recover phosphorus (P) from SS and its thermochemical treatment products. This study has investigated the potential of P reclamation from SS and its thermochemical derivatives, including hydrochar (HC), biochar (BC), and SS incinerated ash (SA). Comparative analyses of physicochemical properties of these derivatives revealed a decrease in hydroxyl and aromatic groups and an increase in aliphatic and oxygen-containing functional groups in HC and BC. Leaching experiments using 1 M sulfuric acid (H2SO4) and 1 M oxalic acid (C2H2O4) suggested that H2SO4 slightly outperformed C2H2O4 in terms of P leaching efficiency. HC achieved 79.1 % optimal leaching efficiency in 60 min using H2SO4, while BC, SS, and SA required 360 min to achieve comparable efficiency. SS and BC reached optimal leaching efficiency at 74.1 % and 76.2 % in H2SO4, while SA achieved 80.9 % in C2H2O4. Importantly, HC and SA are more favorable for P extraction using acid leaching, whereas BC tends to be a potential P carrier. Time-dependent kinetics revealed a two-stage leaching process, i.e., fast and slow reaction stages. Shrinking core model indicates product layer diffusion as the primary rate-limiting step in both stages. Overall, these fundamental insights play an important role in practical P recovery through acid leaching of SS derived residues after thermochemical treatment.

Unlocking Lignin's Potential: Engineered Bacterial Laccases to Produce Biologically Active Molecules.

Laccases are biocatalysts with immense potential in lignocellulose biorefineries to valorize emerging lignin monomers for sustainable chemicals. Despite reduced costs over the past two decades, enzymes remain a major expense in biorefining. Protein engineering can enhance enzyme properties and lower costs further. In this study, we used enzyme engineering tools to improve > 400-fold the catalytic efficiency (kcat/Km) of a hyperthermostable bacterial laccase for 2,6-dimethoxyphenol, a lignin-related phenolic compound. Furthermore, this evolved variant showed improved activity at neutral to alkaline pH for hydroxycinnamyl alcohols, hydrocinnamic acids, phenylpropanoid and vanillyl derivatives. We optimized conditions for the synthesis of syringaresinol, dehydrodiconiferyl alcohol, thomasidioic acid, biseugenol, dehydrodiisoeugenol, and diapocynin, detailing the pH, catalyst concentration, reaction time, temperature, and oxygenation of the reaction mixtures. Our biocatalytic system offers several advantages, including being free of organic solvents, achieving faster reaction times, using lower amounts of enzymes and delivering excellent yields (up to 100%) than reported methods. Additionally, we provide insights that advance the state-of-the-art in lignin combinatory chemistry. This progress marks a significant step forward in valorizing the lignin chemicals platform, enabling high yields of dimeric compounds with structural scaffolds that can be exploited in various biotechnological areas, such as medicinal chemistry and polymer synthesis.

A novel dual-site fluorescent probe for the one-step detection of Cys and SO2 in living cells

BackgroundCysteine (Cys) is the major intracellular thiol and plays a key role in human pathology. Furthermore, endogenous sulfur dioxide (SO2) is produced in mammals. Abnormal levels of SO2 are commonly associated with a variety of respiratory, cardiovascular, and neurological diseases. Therefore, given their important role in life activities, it is significant to construct a fluorescent probe that can detection between Cys and SO2. ResultsWe have designed and synthesized a two-site fluorescent probe CUM with coumarin derivative and benzaldehyde molecules, which can detect and differentiate between Cys and SO2 through dual excitation wavelengths. Its carbon-carbon double bond reacts with Cys and undergoes a nucleophilic reaction, emitting green fluorescence at 520 nm, while SO32− reacts with benzaldehyde molecules in the probe CUM and undergoes a blue fluorescence at 460 nm. SO32− reacts with the benzaldehyde molecule of probe CUM and fluoresces blue at 460 nm. Thus, the probe CUM with two reaction sites can distinguish between Cys and SO2 and shows good selectivity and fast reaction speed. In addition, we successfully utilized probe CUM to image Cys and SO2 in human breast cancer cells (MDA-MB-231). SignificanceThis work provides an effective method for the molecular design of coumarin-based fluorescent probes. Probe CUM as a promising and reliable tool for the meticulous discrimination and quantification of Cys and SO2 in diverse biological matrices, thereby opening up new avenues for various biological systems.

Periodic Flows in Microfluidics.

Microfluidics, the science and technology of manipulating fluids in microscale channels, offers numerous advantages, such as low energy consumption, compact device size, precise control, fast reaction, and enhanced portability. These benefits have led to applications in biomedical assays, disease diagnostics, drug discovery, neuroscience, and so on. Fluid flow within microfluidic channels is typically in the laminar flow region, which is characterized by low Reynolds numbers but brings the challenge of efficient mixing of fluids. Periodic flows are time-dependent fluid flows, featuring repetitive patterns that can significantly improve fluid mixing and extend the effective length of microchannels for submicron and nanoparticle manipulation. Besides, periodic flow is crucial in organ-on-a-chip (OoC) for accurately modeling physiological processes, advancing disease understanding, drug development, and personalized medicine. Various techniques for generating periodic flows have been reported, including syringe pumps, peristalsis, and actuation based on electric, magnetic, acoustic, mechanical, pneumatic, and fluidic forces, yet comprehensive reviews on this topic remain limited. This paper aims to provide a comprehensive review of periodic flows in microfluidics, from fundamental mechanisms to generation techniques and applications. The challenges and future perspectives are also discussed to exploit the potential of periodic flows in microfluidics.

Experimental studies on the interfacial shear characteristics between joint concrete and foamed polymer in cross-river shield tunnel

The inadequate grouting performance in cross-river shield tunnels is primarily due to the insufficient bonding strength between the grouting material and the tunnel segments. In this study, a series of tests were conducted to compare foamed polymer and common grouting materials, focusing on the tangential bonding performance of the interface with tunnel segment concrete under varying humidity conditions. The applicability of polymer for treating leaks in cross-river shield tunnels was explored. The effects of polymer density, interfacial humidity, interfacial roughness, and normal stress on the shear strength of the polymer-concrete interface were investigated. A mathematical model reflecting the interface shear characteristics between polymer and concrete was established and validated. The test results have shown that, due to the fast reaction speed and high expansion rate, foamed polymer was found to be a feasible solution for addressing leakage in cross-river shield tunnels. Compared with common grouting materials, the density of foamed polymer is controllable, and the shear strength between foamed polymer and concrete segments is less affected by humid conditions. The minimum shear strength of the interface between foamed polymer and concrete is 1.2 MPa, while the maximum is 2.0 MPa. Foamed polymer can meet the needs of leakage treatment of cross-river shield tunnel. The interfacial shear strength between foamed polymer and concrete segments is directly proportional to the polymer density, interfacial roughness, and normal stress, and inversely proportional to the level of humid in the tunnel. The influence of various factors on interfacial strength is ranked as follows: polymer density > interfacial humidity > normal pressure > interfacial roughness. The residual error of linear regression mathematical model for the shear strength of interface between foamed polymer and segment concrete follows a normal distribution. The fitting results were proven to be accurate, allowing for the intuitive prediction of the quantitative relationship between shear strength and multiple influencing factors.