Fast Ion Research Articles

Highly Tough Slide‐Crosslinked Gel Polymer Electrolyte for Stable Lithium Metal Batteries

AbstractGel polymer electrolytes (GPEs) hold great promise for the practical application of lithium metal batteries. However, conventional GPEs hardly resists lithium dendrites growth and maintains long‐term cycling stability of the battery due to its poor mechanical performance. Inspired by the slide‐ring structure of polyrotaxanes (PRs), herein we developed a dynamic slide‐crosslinked gel polymer electrolyte (SCGPE) with extraordinary stretchability of 970.93 % and mechanical strength of 1.15 MPa, which is helpful to buffer the volume change of electrodes and maintain mechanical integrity of the battery structure during cycling. Notably, the PRs structures can provide fast ion transport channels to obtain high ionic conductivity of 1.73×10−3 S cm−1 at 30 °C. Additionally, the strong polar groups in SCGPE restrict the free movement of anions to achieve high lithium‐ion transference number of 0.71, which is favorable to enhance Li+ transport dynamics and induce uniform Li+ deposition. Benefiting from these features, the constructed Li|SCGPE‐3|LFP cells exhibit ultra‐long and stable cycle life over 1000 cycles and high‐capacity retention (89.6 % after 1000 cycles). Even at a high rate of 16 C, the cells deliver a high capacity of 79.2 mAh g−1. The slide‐crosslinking strategy in this work provides a new perspective on the design of advanced GPEs for LMBs.

Mechanochemically synthesized flower-like bismuth oxyhalides: An electrochemical platform for diclofenac detection

The emerging drug diclofenac (DICF) has been found to penetrates aquatic systems at alarming concentrations and poses serious and irreversible ecotoxicological threats around the world. In this work, we present the solid-state mechanochemical synthesis of 3D flower-like bismuth oxyhalides (BiOX, where X = Cl, Br, and I) as electrode materials for electrochemical detection of DICF. The characteristics of the flower-like BiOX are systematically investigated using spectroscopic and microscopic techniques. The BiOI-modified glassy carbon electrode (GCE) exhibits superior electrochemical performance for DICF detection compared to the pristine GCE, BiOCl/GCE, and BiOBr/GCE. The 3D flower-like architecture of BiOI facilitates favorable electrocatalytic activities due to its abundant electroactive sites, good conductivity, large surface area, and fast ion diffusion. Notably, the BiOI/GCE displays wide linear ranges (0.5–11.3 & 11.3−76), a low limit of detection (0.11 μM), high sensitivity (1.33 μA μM–1 cm–2), excellent repeatability (2.91 %), good reproducibility (2.88 %), and anti-interfering ability (<±5 %). To validate the practicality of the fabricated BiOI/GCE, the quantitative detection of DICF in human urine and river water is demonstrated and achieves acceptable recovery values. This study introduces an innovative approach to design and produce electrode materials with distinct properties, enabling enhanced electrocatalysis for various electrochemical sensing applications.

Potential Application of 2D Haeckelite MoS2 as an Anode Material for Mg Ion Batteries.

The design and preparation of anode materials with structural stability, fast ion transmission, and low open-circuit voltage are critical to the development of magnesium ion batteries (MIBs). The feasibility of the unique phase Haeckelite MoS2 (Hae-MoS2) monolayer with Haeckelite structure as a potential anode material for MIBs was investigated using density functional theory (DFT) calculations. The Hae-MoS2 monolayer exhibits excellent structural stability and semimetallic characteristics with a Dirac cone located at the Gamma point of band structure. Mg ion is easily adsorbed on the Hae-MoS2 monolayer surface with an adsorption energy of -2.06 eV and can diffuse rapidly with a low diffusion energy barrier (0.3 eV), indicating excellent charge and discharge rates. Most importantly, the Hae-MoS2 monolayer exhibits a suitable open-circuit voltage, which falls within the desired voltage range and ensures the safety of battery performance. These exceptional properties indicate that the Hae-MoS2 monolayer can be proposed as a candidate for anode material for MIBs.

Multicomponent hierarchical Cu-based advanced cathode for ultrahigh capacity rechargeable Cu-Zn battery

Rechargeable aqueous Zn-based batteries (RAZBs) have emerged as a practically attractive option for large-scale energy storage applications due to their cost-effectiveness, safety, eco-friendliness, and high theoretical capacity. Nonetheless, the application of RAZBs at the grid scale is restricted by the drawbacks of cathode that exhibit low capacities and poor durability. In this work, a multicomponent hierarchical Cu@CuO@Cu2O cathode with superior electrochemical energy storage performance has been successfully synthesized by a fairly simple calcination method. Benefiting from its large active area, fast ion diffusion channel, high conductivity, and synergetic effect between different components, the resulting Cu@CuO@Cu2O electrode exhibits ultrahigh specific capacity (40.2 mAh cm−2, 402 mAh cm−3 at 10 mA cm−2), excellent rate capability (24.8 mAh cm−2, 248 mAh cm−3 at 100 mA cm−2) and satisfactory cycling durability (71.5 % capacity retention after 3800 cycles). To our knowledge, such high areal/volumetric specific capacity ranks top among previously reported Cu-based electrode and other aqueous electrodes. Furthermore, the fabricated Cu@CuO@Cu2O//Zn battery achieves an extraordinary energy density of 24.5 mWh cm−2 and a remarkable cyclic capability of 91 % capacity retention after 3000 cycles, highlighting its potential for large-scale energy storage in RAZBs.

Optimizing Prussian Blue Analogues for Potassium‐Ion Batteries: Advanced Strategies

Potassium‐ion batteries (PIBs), with the merits of abundant resources and low cost, have rapidly garnered attention as a potential candidate for large‐scale energy storage. Among the various contenders, Prussian Blue analogues (PBAs) are considered the most suitable cathode materials owing to their relatively easy and economical synthesis as well as the open 3D framework which facilitates fast potassium ions intercalation without causing drastic volume expansion. Despite these advantages, integrating PBA as a cathode material for PIBs presents substantial challenges, which hinder their further practical applications. Herein, a fundamental review on the development and advance of PBAs in PIBs is presented with the elucidation of their synthesis methods, structural characteristics, and optimization strategies. Particularly, key areas of focus include regulating crystal structures, doping transition metals, engineering interfaces, and employing innovative techniques such as high‐entropy approaches are highlighted. Finally, critical perspectives for future development of PBAs toward practical potassium‐based energy storage devices are proposed.

In Situ Construction of Bimetallic Selenides Heterogeneous Interface on Oxidation-Stable Ti3C2Tx MXene Toward Lithium Storage with Ultrafast Charge Transfer Kinetics.

Ti3C2Tx (MXene) is widely acknowledged as an excellent substrate for constructing heterogeneous structures with transition metal chalcogenides (TMCs) for boosting the electrochemical performance of lithium-ion storage. However, conventional synthesis strategies inevitably lead to poor electrochemical charge transfer due to Ti3C2Tx-derived TiO2 at the heterogeneous interface between Ti3C2Tx and TMCs. Here, an innovative in situ selenization strategy is proposed to replace the originally generated TiO2 on Ti3C2Tx with metallic TiSe2 interphase, clearing the bottleneck of slow charge transfer barrier caused by MXene oxidation. The construction of bimetallic selenide formed by CoSe2 and TiSe2 generates intrinsic electric fields to guide the fast ion diffusion kinetics in a heterogeneous interface. Additionally, the CoSe2/TiSe2/Ti3C2Tx heterogeneous structure with enhanced structural stability and improved rate performance is confirmed by both experiments and theoretical calculations. The engineered heterogeneous structure exhibits an ultra-high pseudocapacitance contribution (73.1% at 0.1mVs-1), rendering it well-suited to offset the kinetics differences between double-layer materials. The assembled lithium-ion capacitor based on CoSe2/TiSe2/Ti3C2Tx possesses a high energy density and an ultralong life span (89.5% after 10000 times at 2Ag-1). This devised strategy provides a feasible solution for utilizing the performance advantages of MXene substrates in lithium storage with ultrafast charge transfer kinetics.

Remarkable chemical adsorption and catalysis of 3D self-supporting Zn-doped NiCo2O4 nanowires for high-performance lithium-sulfur batteries

Lithium-sulfur batteries are one of the most potential next-generation energy storage systems with high theoretical energy density and low cost. However, the lithium polysulfides (LiPSs) dissolution and shuttle effect limit their commercial application. Herein, the Zn-doped NiCo2O4 nanowires grown on carbon cloth (ZNCOCC) are prepared by hydrothermal method and as sulfur host. ZNCO nanowires consisting of stacked nanoparticles and abundant mesopores were grown vertically on carbon fibers. The mesoporous structure of ZNCOCC provides more space to accommodate sulfur and its volume change during charging and discharging, is conducive to electrolyte infiltration and maintains strong adsorption of LiPSs to ensure fast ion transport kinetics. The ZNCOCC displays higher Co3+/Co2+ and Ni3+/Ni2+ ratio compared to NCOCC, and the high-valent metal cations can provide more unsaturated electron orbitals for S binding, causing high adsorption of LiPSs. Density functional theory calculations demonstrate that the Zn doping significantly reduces the band gap, improves the conductivity and increases the LiPSs adsorption energy of NCO. The ZNCOCC/Li2S8 displays a high specific capacity of 1184 mAh g−1 (0.1 C) and a low decay of 0.07 %/cycle after 500 cycles (2 C). This research reveals the rational design of a doped bimetal oxide nanostructure for the improvement of lithium-sulfur batteries.

High speed fast-ion D-alpha spectrometer for the NSTX-U tokamak.

Here, we present the design and first calibration results of a new single-channel Fast-Ion D-Alpha (FIDA) spectrometer to be employed at the National Spherical Torus Experiment Upgrade (NSTX-U). The Czerny-Turner-type spectrometer uses a custom-designed aspherical lens setup instead of mirrors and achieves excellent spectral resolution, with high photon throughput through a round-to-linear fiber bundle, and camera frame rates around 8.4kHz. The spectrometer uses a blocking bar to avoid saturation effects of the cold D-alpha emission line and will allow for detailed studies of the fast-ion confinement in NSTX-U. Expected synthetic spectra predicted with the TRANSP and FIDASIM codes show that the spectral range from 648.5 to 658nm will sufficiently cover halo, the red-shifted beam emission, and the blue-shifted portion of FIDA emission in NSTX-U, which is sufficient for fast-ion transport studies of co-rotating fast ions.

Nonlinear simulations of GAEs in NSTX-U

A set of nonlinear simulations has been performed in order to study the nonlinear evolution of unstable global Alfvén eigenmodes in the National Spherical Torus Experiment-Upgrade (NSTX-U). Results of the single toroidal mode number, n, simulations are compared with a full nonlinear simulation (all toroidal harmonics included). In single-n simulations, the conservation of two integrals of motion of a particle in a cyclotron resonance with a monochromatic wave is demonstrated, resulting in a one-dimensional evolution of the particle distribution in (E,μ,pϕ) phase-space. Nonlinear simulations (both single-n and full nonlinear) show a significant redistribution of the resonant fast ions, especially in the pitch parameter. Thus, the changes in the resonant particle's parallel and perpendicular energies can be several times larger than the total particle energy change, with only a small fraction transferring into the excitation of the mode itself. This implies that even a relatively small amplitude mode can significantly modify the beam distribution in the resonant region. For the NSTX-U case considered, the single-n simulation results are close to full nonlinear simulation only for the most unstable mode, in which case the saturation amplitudes and changes in the fast ion distribution are comparable. In contrast, peak amplitudes of subdominant modes in all-n simulations are smaller by a factor of 3–10 compared to single-n runs due to the flattening of the beam ion distribution by the fastest growing mode.

A numerical method for calculating the driven current of neutral beam injection in tokamaks

The current driven by neutral beam injection in tokamak is calculated, and the slowing-down distribution function of the fast ion is obtained by the backward Euler iteration method, including the pitch angle scattering collision. This study reveals that when the pitch-angle cosine is small, the trapped fast-ion current significantly contributes to the total driven current, particularly when the neutral beam is injected perpendicularly. In such cases, the current densities of passing and trapped ions are of the same order of magnitude, with the trapped fast-ion current contributing over 10% to the total neutral beam-driven current. This results in a parabolic profile of the total current in the radial direction, promoting the formation of a negative shear equilibrium structure in the core of the tokamak plasma. The numerical approach was validated against the NUBEAM code while considering electron shielding effects and applied to calculate the neutral beam-driven current in multiple tokamaks. The influence of pitch-angle cosine and neutral beam injection power on the driven current was studied at different radial positions.

Vertical-channel hierarchically porous 3D printed electrodes with ultrahigh mass loading and areal energy density for Li-ion batteries

Lithium-ion batteries (LIBs) are renowned for their high energy density, long lifespan, and minimal self-discharge, making them a prominent power supply system. However, the persistent demand for improved energy density coupled with mechanical stability remains a significant challenge, as efforts to enhance electrode thickness or achieve geometric complexity through conventional ink-casting methods have yielded limited results. To tackle this challenge, we applied a three-dimensional (3D) printing technique to swiftly construct 3D thick electrodes with ultrahigh mass loading. Combined with unidirectional ice-templating process, high mass loading electrodes with hierarchically porous structures were successfully fabricated. The mass loading of the 3D electrodes can reach up to 73.83 mg cm−2, significantly enhancing the areal capacity. The low tortuosity and good mechanical resilience of these structures enable fast ion and charge transport, leading to significant improvements in areal energy density without sacrificing the power density. The assembled full cell exhibits an impressive areal capacity of 10.34 mAh cm⁻2 at 0.2 C and an excellent energy density of 18.41 mWh cm−2, surpassing other 3D printed lithium-ion batteries. This approach marks a significant advancement in electrode structural design towards higher areal capacity and energy density, showcasing the intriguing potential of 3D printed batteries for practical applications. Additionally, it also highlights the scalability and design versatility provided by 3D printing technique.

A robust 3D nanostructured composite polymer electrolyte with novel dual-ion channels toward solid-state sodium metal batteries

The high energy density and low cost of sodium metal batteries enable them to be the rising star of next-generation batteries. However, the growth of sodium dendrites and the high activity of sodium metal may lead to significant safety risks for liquid sodium metal batteries. Composite polymer electrolytes (CPEs), which combine the advantages of inorganic solid-state electrolyte and solid-state polymer electrolytes, have become a promising candidate to replace liquid electrolytes. In this study, a novel Na-beta-Al2O3/polyacrylonitrile (PAN) CPE with a 3D network nanostructure (NAP) has been synthesized by electrospinning method. NAP membrane provides synergistic dual-ion channels for the migration of sodium ions, exhibiting ionic conductivity of 7.22 × 10−4 S cm−1, a sodium-ion transport number of 0.73, and an electrochemical stabilization window as high as 4.92 V. Compared with pure PAN, NAP presents enhanced mechanical strength, superior electrochemical properties and interfacial stability. NAP-based sodium symmetric cell achieves stable plating and stripping for 800 h. At room temperature, the capacity retention ratios of NAP-based Na3V2(PO4)3//Na cell are 92.02% (0.2 C, 200 cycles) and 73.10% (0.5 C, 1000 cycles), respectively. The capacity retention is 72.49% after 250 cycles at 0.5 C and a high temperature of 60 °C. X-ray photoelectron spectroscopy spectra indicate that solid electrolyte interphase formed in NAP-based battery contains higher NaF component, R–(CO)O–Na content and interfacially favorable organic components, which are beneficial to accelerate the sodium-ion transfer at the interface. This work provides new insights into the construction of 3D nanostructured CPEs with fast ion transport for solid-state sodium metal batteries.

Origin of enhanced electrochemical performance in lithium-rich cathode materials via the fast ion conductor Li2O-B2O3-LiBr

Lithium-rich cathode materials have garnered significant attention in the energy sector due to their high specific capacity. However, severe capacity degradation impedes their large-scale application. The employment of fast ion conductors for coating has shown potential in improving their electrochemical performance, yet the structural and chemical mechanisms underlying this improvement remain unclear. In this study, we systematically analyze, through first-principles calculations, the mechanism by which Li2O-B2O3-LiBr (Hereafter referred to as LBB) coating enhances the electrochemical performance of the lithium-rich layered cathode material 0.5Li2MnO3·0.5LiNi1/3Co1/3Mn1/3O2 (Hereafter referred to as OLO). Our calculations reveal that the LBB coating introduces a more negative valence charge (average −0.14 e) around the oxygen atoms surrounding transition metals, thereby strengthening metal-oxygen interactions. This interaction mitigates irreversible oxygen oxidation caused by anionic redox reactions under high voltages, reducing irreversible structural changes during battery operation. Furthermore, while the migration barrier for Li+ in OLO is 0.61 eV, the LBB coating acts as a rapid conduit during the Li+ deintercalation process, reducing the migration barrier to 0.32 eV and slightly lowering the internal migration barrier within OLO to 0.43 eV. Calculations of binding energies to electrolyte byproducts HF before and after coating (at −7.421 and −3.253 eV, respectively) demonstrate that the LBB coating effectively resists HF corrosion. Subsequent electrochemical performance studies corroborated these findings. The OLO cathode with a 2% LBB coating exhibited a discharge capacity of 157.12 mAh g−1 after 100 cycles, with a capacity retention rate of 80.38%, whereas the uncoated OLO displayed only 141.67 mAh g−1 and a 72.45% capacity retention. At a 2 C rate, with the 2 wt% LBB-coated sample maintaining a discharge capacity of 140.22 mAh g−1 compared to only 107.02 mAh g−1 for the uncoated OLO.

The importance of A-site cation chemistry in superionic halide solid electrolytes

Halide solid electrolytes do not currently display ionic conductivities suitable for high-power all-solid-state batteries. We explore the model system A2ZrCl6 (A = Li, Na, Cu, Ag) to understand the fundamental role that A-site chemistry plays on fast ion transport. Having synthesised the previously unknown Ag2ZrCl6 we reveal high room temperature ionic conductivities in Cu2ZrCl6 and Ag2ZrCl6 of 1 × 10−2 and 4 × 10−3 S cm−1, respectively. We introduce the concept that there are inherent limits to ionic conductivity in solids, where the energy and number of transition states play pivotal roles. Transport that involves multiple coordination changes along the pathway suffer from an intrinsic minimum activation energy. At certain lattice sizes, the energies of different coordinations can become equivalent, leading to lower barriers when a pathway involves a single coordination change. Our models provide a deeper understanding into the optimisation and design criteria for halide superionic conductors.

Sn-doped hierarchical flower-like MoSe2/NC embedded in N-doped carbon for fast and durable sodium ion storage

In this study, Sn-doped MoSe2 nanosheets were grown on nitrogen-doped carbon substrate (Sn-MoSe2/NC) to assemble into hierarchical flower-like porous hollow microspheres. The as-obtained composites could maintain a stable sodium ion storage performance of 305 mAh g−1 at 1 A g−1 for 600 cycles, and even had 214 mAh g−1 at a current of 5 A g−1, with 95 % of the capacity retained for 8000 cycles. Thanks for synergistic doping strategies, the electronic conductivity was increased by the enlarged layer spacing. Meanwhile, the volume tension caused by the insertion and extraction of sodium ions could be released and absorbed by the hollow structure. Furthermore, MoSe2 and nitrogen-doped carbon had a strong interfacial connection through Mo-N bonding, which helped to enhance the stability of the structure.

Reduced graphene oxide-supported Na3V2(PO4)3/C cathode material synthesized by sol-gel method to improve electrochemical performances of sodium-ion batteries

Na-ion batteries are potential alternative to Li-ion batteries due to their low cost and abundance of sodium source. And Na3V2(PO4)3 is regarded as the most promising cathode material because of their high capacity and larger interstitial channels for fast Na ion migration. However, the disadvantage of low conductivity suppresses its practical applications. To increase electrochemical properties of the cathode, reduced graphene oxide-supported Na3V2(PO4)3/C (NVP/C-G) composite has been prepared, in which the graphene is used to accelerate movement of the electronics and Na ions. XRD characterizations show that the synthesized material is well corresponding to NASICON structure, and SEM image show that the graphene sheets are uniformly dispersed on surface of the composite. The initial capacity of the material is up to 103.5 mAh g−1 at 0.1 C, and 92.3 % and 92.1 % of capacities are maintained with discharge ratios of 0.5 C and 2 C over 500 cycles, proving a much better cycling stability compared with the Na3V2(PO4)3/C (NVP/C) particles. The enhanced discharge capacities and retention rate of the NVP/C-G could be ascribed to the tight contact between NVP/C and RGO sheets, which is beneficial to fast electron transport and better intercalation/deintercalation of Na+ through the nanoparticles. Therefore, the synthesized NVP/C-G displays highly potential for practical use in sodium-ion batteries.

Overview of the KSTAR experiments toward fusion reactor

Abstract The KSTAR has been focused on exploring the key physics and engineering issues for future fusion reactors by demonstrating the long pulse operation of high beta steady-state discharge. Advanced scenarios are being developed with the goal for steady-state operation, and significant progress has been made in high ℓi, hybrid and high beta scenarios with βN of 3. In the new operation scenario called FIRE, fast ions play an essential role in confinement enhancement. GK simulations show a significant reduction of the thermal energy flux when the thermal ion fraction decreases and the main ion density gradient is reversed by the fast ions in FIRE mode. Optimization of 3D magnetic field techniques, including adaptive control and real-time machine learning (ML) control algorithm, enabled long-pulse operation and high-performance ELM-suppressed discharge. Symmetric multiple shattered pellet injections and real-time DECAF are being performed to mitigate and avoid the disruptions associated with high-performance, long-pulse ITER-like scenarios. Finally, the near-term research plan will be addressed with the actively cooled tungsten divertor, a major upgrade of the NBI and helicon current drive heating, and transition to a full metallic wall.

Designing Heterodiatomic Carbon Hydrangea Superstructures via Machine Learning-Regulated Solvent-Precursor Interactions for Superior Zinc Storage.

Carbon superstructures with exquisite morphologies and functionalities show appealing prospects in energy realms, but the systematic tailoring of their microstructures remains a perplexing topic. Here, hydrangea-shaped heterodiatomic carbon superstructures (CHS) are designed using a solution phase manufacturing route, wherein machine learning workflow is applied to screen precursor-matched solvent for optimizing solvent-precursor interaction. Based on the established solubility parameter model and molecular growth kinetics simulation, ethanol as the optimal solvent stimulates thermodynamic solubilization and growth of polymeric intermediates to evoke CHS. Featured with surface-active motifs and consecutive charge transfer paths, CHS allows high accessibility of zincophilic sites and fast ion migration with low energy barriers. A anion-cation hybrid charge storage mechanism of CHS cathode is disclosed, which entails physical alternate uptake of Zn2+/CF3SO3 - ions at electroactive sites and chemical bipedal redox of Zn2+ ions with carbonyl/pyridine motifs. Such a beneficial electrochemistry contributes to all-round improvement in Zn-ion storage, involving excellent capacities (231 mAh g-1 at 0.5 A g-1; 132 mAh g-1 at 50 A g-1), high energy density (152Wh kg-1), and long-lasting cyclability (100000 cycles). This work expands the design versatilities of superstructure materials and will accelerate experimental procedures during carbon manufacturing through machine learning in the future.

Covalent triazine frameworks crosslinked microporous polymer membranes with fast and selective ion transport for ultra-stable vanadium redox flow batteries

The vanadium redox flow batteries (VRFBs) are an essential pathway to long-duration energy storage with the merits of power and energy decoupling, long lifetime and safety. However, low coulombic efficiency stemming from vanadium crossover across the membrane together with notable ohmic loss originated from low proton conductivity of the membrane still limits high performance operation of the VRFBs. Herein, we proposed 2,2′-bipyridine-based covalent triazine frameworks (bipCTF) crosslinked sulfonated-poly (4,4′-diphenylether-5,5′-bibenzimidazole) (SOPBI) (bipCTF/SP-100) for use as the membrane in VRFBs, which synergistically prevents vanadium crossover and enhances proton conductivity. By delicately tuning the sulfonation degree and properly incorporate bipCTF, the bipCTF/SP-100 membrane is successfully synthesized based on OPBI polymers, which delivers a reduced area resistance of 0.3 Ω cm2 and a low VO2+ permeability of 19.05 × 10−9 cm2 s−1, affording an excellent trade-off between proton conductivity and ion selectivity. Theoretical calculation further corroborates that the high proton conductivity of bipCTF/SP-100 is attributed to the ionic channels formed by bipCTF, while the superior ion selectivity is assigned to protonated imidazole and pyridine. Benefiting from microporous bipCTF/SP-100 membrane, the VRFB exhibits a high CE of 99.8 % and an excellent EE of 78.3 % at 250 mA cm−2 and meanwhile yields a high capacity retention of 94.8 % after 200 cycles at 200 mA cm−2, which shows enormous potential for high power density operation of the VRFBs.

Enhanced electrochemical cyclability of composite sodium metal anode with inorganic-rich solid electrolyte interphase

The practical application of sodium (Na) metal anode in rechargeable batteries is impeded by inferior electrochemical properties and safety hazards arising from uneven Na plating/stripping behaviors. The Na-ion diffusion within the solid electrolyte interphase (SEI) plays a pivotal role in influencing these behaviors and the electrochemical performance of the Na metal anode. In this study, we leveraged the spontaneous reaction between red phosphorus (P) and metallic Na to fabricate a Na/Na3P (NNP) composite foil using a straightforward folding and mechanical rolling method at room temperature. The in-situ formed Na3P phase fosters the formation of an inorganic-rich SEI layer with high ionic conductivity, effectively enhancing the Na-ion diffusion kinetics and curbing the formation of Na dendrites. Moreover, the Na3P present in the NNP composite can continually replenish the functional component and promptly repair the fracture of the SEI layer, thereby ensuring the stability of its structure and properties. Consequently, the NNP composite electrode significantly extends the Na plating/stripping cyclic lifespan compared to a bare Na anode. As a demonstration, the Na3V2(PO4)3||NNP full cell exhibits stable performance over 400 cycles with 96.7 % capacity retention at 5C. This work paves the way for designing stable SEI layers with fast ion diffusion capability for alkali metal anodes, and the findings are anticipated to propel the development of alkali metal batteries.