Falling Number Values Research Articles

Breadmaking Quality Parameters of Different Varieties of Triticale Cultivars.

The aim of this research is to investigate the quality of different triticale cultivars (Ingen 35, Ingen 33, Ingen 93, Ingen 54, Ingen 40, Fanica and Costel) cultivated in the Republic of Moldova from the point of view of the flour, dough, and bread quality characteristics. This research may be of great importance for producers and consumers due to the high production capacity, wide adaptability, economic significance in human foods and nutritional value of triticale cultivars. The triticale flours were analyzed for moisture, ash, protein, wet gluten, fat, carbohydrates, acidity and color parameters (L*, a* and b* values). According to the chemical values, the triticale flours were suitable for breadmaking. The moisture content was less than 14% for all triticale varieties, indicating a long shelf life during its storage and the lowest protein content of 13.1%. The mixing, pasting and fermentation characteristics of triticale dough were analyzed using Mixolab, falling number, dynamic rheometer, alveograph and rheofermentometer devices. All triticale flours presented high levels of α-amylase, with falling number values being less than 70 s. The bread quality characteristics analyzed were the loaf volume, porosity, acidity, and sensory characteristics, and the textural parameters examined were the hardness, gumminess, chewiness, cohesiveness, and resilience. Our data showed large differences in breadmaking quality parameters. However, according to the sensory data, all the bread samples except those obtained from the Costel variety were of a very good quality, being within a total sensory range of 25.26-29.85 points. According to the relationships between flour, dough and bread characteristics obtained through principal component analysis, it may be concluded that the triticale varieties Costel, Ingen 33, Ingen 93 and Fanica, and Ingen 35 were more closely associated with each other. Significant differences were found between the triticale variety samples Ingen 40, Fanica, and Ingen 35 and between Ingen 54, Ingen 33, Costel, and Ingen 93.

A study to clarify whether sunn pest (Eurygaster integriceps) increases amylase activity in wheat

There is uncertainty as to whether amylase is injected into wheat kernels by the sunn pest (SP). There are conflicting results in the literature as to whether the amylolytic activity (AA) of insect-damaged wheat is increased. Therefore, the research question of this study is whether amylase is injected into wheat kernels by SP. Two bread wheat cultivars with different levels of SP-damage were used (first year Golia 2.35 % SP damaged kernel ratio [SPDR], second year Golia 3.92 % SPDR and Sagittario 7.8 % SPDR). Sound and SP-damaged wheat (SPDW) kernels were manually separated. In addition, SPDW kernels were divided into four categories according to their infection rates. The AA of these different wheats was determined by using AACC methods 22-05.01 and 56–81.04. In cultivar Golia, the α-amylase activity of the most damaged wheat (C4/4 WGWF) was 9.5 times higher than that of the undamaged wheat. The SP-damaged samples had a lower Falling Number (FN), i.e. higher AA, than the undamaged samples in both cultivars. The FN values of the flour samples prepared from the 100 % SPDW were reduced by up to 40 % compared to the undamaged samples. In conclusion, we clearly found increased amylase activity in SPDW. As the proportion of insect-damaged kernels in the wheat mass increased, the AA of the wheat and its flour also increased, as did the proteolytic activity. Because the AA in some wheats is insufficient for bread-making, SPDW can be blended to sound wheat varieties within certain limits to reduce or reset the use of amylase base additives and reduce bread costs.

Lupin as Ingredient in Durum Wheat Breadmaking: Physicochemical Properties of Flour Blends and Bread Quality.

The popularity of adding pulse flours to baked goods is growing rapidly due to their recognised health benefits. In this study, increasing amounts (3, 7, 10, and 15%) of white lupin flour (Lupinus albus L.) and of protein concentrate from narrow-leaved lupin (Lupinus angustifolius L.) were used as replacements for durum wheat semolina to prepare bread, and their effects on the physicochemical properties of the flour blends, as well as the technological and sensory qualities of bread, were evaluated. The addition of protein concentrate from narrow-leaved lupin and white lupin flour increased the water binding capacity and the leavening rate compared to pure semolina. A farinograph test indicated that the dough development time had a slight but significant tendency to increase with the addition of lupin flour and protein concentrate of narrow-leaved lupin, while had a negative effect on the stability of dough. The alveograph strength decreased (225, 108, and 76 × 10-4 J for dough made with semolina, 15% of protein concentrate from narrow-leaved lupin, and 15% of white lupin flour, respectively), whereas there was an upward trend in the P/L ratio. Compared to re-milled semolina, the samples with lupin flour and protein concentrate from narrow-leaved lupin had low amylase activity, with falling number values ranging from 439 s to 566 s. The addition of the two different lupin flours lowered the specific volumes of the breads (2.85, 2.39, and 1.93 cm3/g for bread made from semolina, from 15% of protein concentrate from narrow-leaved lupin, and from 15% of white lupin flour, respectively) and increased their hardness values (up to 21.34 N in the bread with 15% of protein concentrate from narrow-leaved lupin). The porosity of the loaves was diminished with the addition of the two lupin flours (range of 5-8). The sensory analysis showed that the addition of white lupin flour or protein concentrate from narrow-leaved lupin did not impart any unpleasant flavours or odours to the bread. To conclude, the use of lupin in breadmaking requires adjustments to strengthen the gluten network but does not require a deflavouring process.

Biochemical and Quality Parameter Changes of Wheat Grains during One-Year Storage under Different Storage Conditions

The selection of suitable storage conditions and monitoring of changes in the wheat grains using suitable parameters are of great importance for the sustainability of technological quality and utilization of the entire stored quantity of wheat grains without waste generation until the next harvest. Wheat grains of three varieties, stored for 12 months at three different conditions of environmental temperature and relative humidity (% RH): (1) 40 ± 1.06 °C; 45 ± 3% RH; (2) 4 ± 1.05 °C; 45 ± 4% RH, (3) 15 ± 8.51 °C; and 67 ± 4% RH, were compared for germination percentage, protein and advanced glycation end products content, oxidoreductive and proteolytic enzyme activity, wet gluten content and falling number. A decrease in the activity of guaiacol peroxidase and polyphenol oxidase, as well as an increase in the content of advanced glycosylation end products and the falling number, was observed in wheat grains during storage conditions at 40 ± 1.06 °C; 45 ± 4% RH. On the other hand, storage of wheat grains at lower temperatures resulted in much lower changes in examined parameters, among which advanced glycation end-product content, peroxidase activity and falling number values were the greatest. Based on the obtained results, it can be assumed that changes in guaiacol peroxidase activity and falling number might be used as indicators of improper wheat grain storage.

Effect of cold-pressed Nigella sativa seed meal on dough quality and nutritional value of bread.

This study investigated the application of black cumin meal (BCM) obtained from cold-pressing Nigella sativa seeds in bread baking. The effect of BCM on bread rheological traits and its nutritional value were investigated. Zeleny sedimentation, falling number, Farinograph, and Extensograph values in flour mixed with BCM (2.5%, 5%, 7.5%, and 10%) were evaluated. In addition, mineral content, protein, fat, thymoquinone, and crude cellulose contents in bread were investigated. Zeleny sedimentation and falling number values decreased with the increase in BCM in the flour samples. The water absorption, development time, stability, and softening degree values of the dough measured in the Farinograph device did not show a statistically significant difference in the flour with the BCM mixture compared to the control sample. The energy value and extensibility determined in the Extensograph device decreased with the increase in the amount of BCM in the flour. The amount of protein and crude fiber in bread increased with the increase in the amount of BCM. It was noted that there were significant increases in Fe, Ca, Mg, K, and Zn levels with the increase in BCM. Meanwhile, thymoquinone was not found in the bread samples containing BCM. The results revealed that the nutritional values of BCM-mixed bread are rich in protein, minerals, and cellulose.

Влияние ионизирующего облучения на пшеничную хлебопекарную муку

Radiation processing suppresses the development of microorganisms and pests in food products. This method is safe and does not affect nutritional value; however, it may change the properties of starch and proteins. The research objective was to define the effect of ionization on the baking properties and safety indicators of wheat flour.
 The study featured wheat flour subjected to gamma irradiation at 0–47.52 kGy, as well as dough and bread made from this flour. The flour samples were tested for the radioactivity of radionuclides; a set of experiments revealed their microbiological indicators and falling-number values. The dough samples were studied on an Alveograph and a Mixolab analyzer to define their structural and mechanical properties. The quality of bread was evaluated by its specific volume, shape stability, and sensory profile.
 The flour proved safe in terms of residual gamma radiation after 24 and 72 h. At the maximal dose of gamma radiation, the total viable count of mesophyll aerobic and optional-anaerobic microorganisms decreased by fifteen times, whereas the amount of mold decreased by five times. The total strain energy, elastic properties, and elasticity index of the dough declined by more than 50%. The dough had a lower stability during kneading. Its gelatinization onset started earlier by 2.3–3.3°C. The falling number decreased by more than four times, probably, due to the changes in the state of wheat starch. The bread samples had a smaller specific volume and a lower dimensional stability. They also demonstrated signs of darkening, stickiness, and crumb crushing at the maximal irradiation dose (47.52 kGy).
 The microbiological safety indicators of wheat flour increased at the maximal irradiation dose. However, the baking properties of flour decreased. The sensory and physicochemical parameters of bread quality started to deteriorate at ≥ 23 kGy. Therefore, ionization cannot be recommended as a disinfection method for baking wheat flour production.

Effect of psyllium husk and wheat mill bran fractions on the microstructure and mixograph characteristics of Arabic bread

When psyllium husk, wheat bran and germ was added, Incorporation of psyllium and wheat bran may affect the dough structure, dough rheology as well as the final quality of baked Arabic flat bread, which, thus, became important for this study. Scanning Electron Micrographs (SEM) taken on Arabic bread, depicted both intact small and the large starch granules on the outer crust area. This was mainly due to the rapid loss of moisture from the Arabic bread surface during intense baking operation leaving less moisture for gelatinization to take place. With psyllium added to WWF at 0, 3, and 5 % level, the peak time was increased from 3 to 4.5 min. The ascending and descending angle values were more or less identical in all the samples except with wheat germ addition, whereas much lower values (51 to 58°) for these parameters were observed, indicating a faster rate of dough breakdown. With psyllium, fine- and coarse bran addition to WWF, a corresponding increase in peak time was observed. Ascending and descending angles showed similar trends to that of the WWF and psyllium combinations. Use of falling number apparatus is an indirect method of measuring the diastatic enzyme activity in cereal flours. WGF showed lower falling-number values (502 s) than the WWF (607 s). Addition of fine bran to WWF lowered the falling number (607 to 563 s) whereas with coarse wheat bran and germ, these values were increased.

The Impact of Germinated Chickpea Flour Addition on Dough Rheology and Bread Quality.

The research focused on the effect of germinated chickpea flour (GCF) in a lyophilized form on dough rheology, microstructure and bread quality. The GCF addition levels in refined wheat flour with a low α-amylase activity were 5%, 10%, 15% and 20%, up to an optimum falling number value of the mixed flour. Generally, the dough rheological properties of water absorption, tolerance to mixing, dough consistency, dough extensibility, index of swelling, baking strength and loss tangent (tan δ) for the temperature sweep test decreased with the increased level of GCF addition, whereas the total volume of gas production and G′ and G″ modules for the temperature sweep test increased. Dough microstructure analyzed by epifluorescence light microscopy (EFLM) clearly showed a change in the starch and gluten distribution from the dough system by an increase in protein and a decrease in starch granules phase with the increased level of GCF addition in wheat flour. The bread physical characteristics (loaf volume, porosity, elasticity) and sensory ones were improved with up to 15% GCF addition in wheat flour. The bread firmness increased, whereas the bread gumminess, cohesiveness and resilience decreased with increased GCF addition in wheat flour. The bread crust and crumb color of the bread samples become darker with an increased GCF addition in the bread recipe.

The Effect of Sea Salt with Low Sodium Content on Dough Rheological Properties and Bread Quality

The aim of this study was to analyze the effects of the addition of sea salt with low sodium content (SS) in a refined wheat flour at the levels of 0.3%, 0.6%, 0.9% 1.2% and 1.5% on the rheological properties of the dough during mixing, extension, pasting and fermentation and the bread quality in terms of bread physical properties, crumb and crust color, texture and sensory characteristics. According to the data we obtained, the SS presented a strengthening effect on the dough network by increasing its stability, dough development time, energy and resistance. Moreover, the SS addition resulted in an increase in dough extensibility, to a delay of the gelatinization process and an increase of the falling number value. The bakery products obtained with the SS were of a higher quality compared to the control sample, presenting better physical and textural characteristics, a darker color and being more appreciated by consumers with the increased level of SS addition in the wheat flour. According to the sodium content from the bread recipe, the bread samples obtained may be classified as products with a very low sodium content of up to a 0.6% SS addition in the wheat flour or with a low sodium content if at least 0.9% SS is contained in the bread recipe.

Possibilities to Use Germinated Lupine Flour as an Ingredient in Breadmaking to Improve the Final Product Quality

This study focuses on the possibility of using germinated lupine flour (GLF) in the breadmaking process in order to improve dough rheology and bread characteristics. For this purpose, different levels (0%, 5%, 10%, 15% and 20%) of germinated lupine flour were used, and the influence of its addition in wheat flour was analyzed. On empirical dough rheological properties, GLF addition in wheat flour has the effect of decreasing the water absorption capacity, dough consistency, baking strength, extensibility, tolerance for mixing and of increasing total gas production and falling number value. On fundamental dough rheological properties, GLF addition in wheat flour increased the tan δ and decreased the G′ and G″ modules with the increased dough temperature. The microscopic distribution of starch and gluten in the dough system was changed by GLF addition in wheat flour by an increase of the protein area and a decrease of the starch one. Regarding the bread characteristics, the GLF addition improved the specific volume, porosity and elasticity up to 15% GLF addition in wheat flour and decreased the textural properties gumminess and resilience. Regarding the color parameters of the bread, the GLF addition in the dough recipe had a darkening effect on the crumb and bread crust. The sensory data show that the bread samples up to 15% GLF addition in wheat flour were better appreciated than the control sample. According to our data, it is recommended to use a maximum level of 15% of the addition of germinated lupine flour in the dough recipe for making white wheat bread.

Influence of Spring Wheat Growing Conditions on Alpha-Amylase Activity in Grain

The meteorological conditions in which organogenesis stages take place and hydrothermal regime can determine the phenotypic manifestation of quantitative signs, such as, for example, the activity of alpha-amylase. The purpose of our work was to determine what factors (temperature, precipitation, heterothermal coefficient) affect the enzyme activity, at what time of the vegetation, and in what way this influence is evident. The analysis of weather conditions and falling number (FN) for the period from 2011 to 2020 was carried out. Analysis of the FN value over 10 years showed that it can vary from 90 s to 429 s, and at that, the nature of its change is the same, regardless of whether we are considering one variety or the average value for a group of varieties. The correlation coefficient between the FN of a group of varieties and individual FN is 0.94-0.98. Generally, during the vegetation season, the alpha-amylase activity was influenced to a greater extent by the amount of precipitation than by temperature. This dependence is negative - an increase in precipitation leads to a decrease in the FN, and, consequently, to an increase in the enzyme activity. However, it was found that in different phases of ontogeny the influence of temperature and precipitation can be diametrically opposite.

Application of the alveograph device for the development of requirements for the quality of flour for the production of a wafer sheet

Due to the constantly growing demand for flour confectionery and culinary products, it became necessary to develop specialized requirements for the quality of wheat flour as a raw material. To date, there are no such requirements in our country, and for the production of these products, bakery flour obtained according to the traditional wheat grind scheme was used, the quality of which had to be leveled depending on the range of confectionery products. One way to solve this problem is to differentiate the properties of wheat flour according to its intended purpose and their rationing. The purpose of the study is to develop quality requirements for Russian wheat flour for the production of wafer sheets according to objectively and reliably determined indicators of the dough rheological properties using an alveograph device to create, in the future, a system for classifying wheat flour by its intended purpose. Flour quality assessment was carried out using domestic devices and laboratory equipment (MOK system, Falling-number value, etc.); the dough rheological properties were evaluated by an alveograph device (company Chopin, France), wafer sheets were baked and evaluated using methods previously developed by the authors. The analysis of the interdependence of standardized quality indicators, as well as newly developed ones, was conducted to identify indicators that differentiate the quality of wheat flour by its intended purpose, i.e. by finished products. For this, methods of mathematical statistics were applied.

Effects of Dry Sourdough on Bread-Making Quality and Acrylamide Content

The aim of this study was to investigate the possibility of reducing the acrylamide content of bread samples obtained from wheat flour with a high extraction rate by adding a dry sourdough (SD) into the bread recipe. According to the data obtained, compared to the control sample the acrylamide content was significantly reduced (p < 0.05) by more than 50% for the bread samples in which low levels of SD of 1–3% were added to wheat flour. More so, due to the fact that SD affects bread quality, its technological effects on bread making have been investigated. The dough’s rheological properties (mixing and pasting using Mixolab, extension using Alveograph, fermentation using Rheofermentometer), falling number value, and bread quality parameters (loaf volume, porosity, elasticity, color, textural and sensory qualities) have been investigated. In general, SD addition caused a weakening effect on wheat flour dough, an increase in the total volume of CO2 produced during fermentation and a decrease in the falling number value. On bread quality, SD addition improved bread physical characteristics, darkened the bread crumb and crust, decreased the textural parameters (firmness, gumminess, cohesiveness and resilience) and improved the bread sensory characteristics for the samples with the addition of 1–2% SDto wheat flour.

Estimation of technological value and chemical composition of selected common wheat cultivars (Triticum aestivum L.)

The aim of the study was to estimate the technological value and chemical composition of new common wheat cultivars. The experimental material consisted of grain and flour obtained from 5 cultivars of common wheat, registered in 2017-2019, donated by Plant Breeding Strzelce - IHAR Group Ltd., Co., and harvested in years 2017-2018. The physical characteristics of the grain were determined: milling yield, falling number, gluten content, Zeleny sedimentation index as well as farinograph analysis and laboratory baking were performed. Furthermore, the content of grain nutrients and dietary fiber was determined. Significant differences between cultivars in terms of technological parameters and chemical composition have been demonstrated. The protein content in the grain was in the range of 13.3-15.2%, and the amount of gluten in the range of 28.6-36.8%. The cultivars were characterized by low alpha-amylase activity with an average falling number value 331s. The average water absorption of flour was 62.1%, and the volume of obtained bread was in the range 318-381cm3. The bread of best quality was obtained from the Wilejka cultivar, that was also the richest source of protein. The average dietary fiber content from two years of research was 10.8%, including 7.7% of non-starch polysaccharides (NSP), of which 5.8% of the insoluble fraction (I-NSP) and 1.9% of the soluble fraction (S-NSP). The richest source of dietary fiber was the spring wheat Alibi. The tested cultivars were characterized by high technological value and very good chemical composition and can be recommended for use in the food industry.

Effect of Storage Material and Location on Physicochemical Properties and Nutritional Composition of Stored Bread Wheat in Ethiopia

Postharvest management intervention of wheat grain needs to be examined from technological quality perspectives before its introduction to end-users. Local and improved methods of grain storage cause a lot of losses in terms of physical and Physico-chemical properties. These losses could be improved by providing appropriate storage materials at all agro-ecologies. This study aimed to evaluate the effects of different grain storage materials on the physical and physicochemical properties of stored wheat at different locations. The experiment included three treatments; (Purdue Improved Crop Storage (PICS), polypropylene bags, and Jute bags) at different agro-ecological locations; midland (Debrezeit), lowland (Werer), and highland (Kulumsa). Wheat, Lemu variety was stored in triplicate (25 Kilogram/container) for six months (December 2018 - June 2018) under normal environmental conditions in a randomized complete block design (RCBD), with three replication times Wheat stored in Jute bag at lowland for 6 months had lower final germination percentage, lower gluten index, and higher falling number value. In addition, wheat stored at lowland in jute bag had reduced hardness index value. Meanwhile, wheat stored in a Jute bag at midland for 6 months had a lower final germination percentage, lower hectoliter weight but, insignificant change in the hardness index value. Wheat stored at low land, midland, and highland in a jute bag for 4 and 6 months had shown increment in protein content. Wheat stored at midland in jute bag and PICS for 6 months had lower hectoliter weight and flour yield percentage. Besides, wheat stored at midland in a jute bag for 4 months of storage had higher wet and dry gluten content but, lower gluten index value. This condition may pose a negative influence on the baking performance of flour from wheat stored at lowland and with traditional jut bags. From this study, it can be concluded that PICS bags at all storage sites had Significant effective storage materials to preserve wheat grains. Further investigation, however, is very important to evaluate the influence of these treatments on the end-use qualities including baking quality.

ASSOCIATION BETWEEN FALLING NUMBER AND GRAIN CHARACTERISTICS TO EVALUATE PREHARVEST SPROUTING IN WHEAT

The falling number (FN) is a widely used parameter to evaluate sprouting damage in wheat. Despite its importance, many breeding programs lack facilities to determine the FN routinely. This study was conducted to elucidate the relationship of the falling number with germination percentage, visual sprouting score, hectoliter weight and the grain weight per spike, to improve the selection criteria in the pre-harvest sprouting (PHS) trials. Thirteen genotypes differing in PHS tolerance were evaluated in a rain simulator. The statistical analysis was conducted to understand the relationship of FN with grain characteristics. The path coefficient analysis revealed the highest association of the FN with the percentage of sprouted grains. Also, regression analysis determined that samples with more than 46% of sprouted grains had FN below 200s. The grains with 32 to 46% of germination resulted in FN values between 200 and 250s, and those with 19 to 32% of germination had FN between 250 and 300 s. Only those samples with less than 19% of germination resulted in FN values higher than 300s. The strong association between the germination percentage and the FN allows the selection of promising lines and the elimination of undesirable ones at an early stage of breeding.

The Effect of Sodium Reduction by Sea Salt and Dry Sourdough Addition on the Wheat Flour Dough Rheological Properties.

The aim of this research was to investigate a technological approach to decrease the sodium content from bakery products in order to respond to the World Health Organization (WHO)’s recommendation to reduce dietary salt intake. Due to the fact that sodium chloride is one of the main ingredients from baking products that affects dough rheology and therefore the technological process of the bakery products, it is important to evaluate these properties. This study analyzes the effect of sea salt with low sodium content (SS) and dry sourdough from wheat flour (SD) as substitutes for sodium chloride on dough rheological properties and on mixing, extension, pasting, and fermentation process by using Farinograph, Extensograph, Amylograph, Falling Number, and Rheofermentometer devices. The results were analyzed using response surface methodology. SS presented a strengthening effect on the gluten network whereas SD presented a weakening one. On extension properties, SS and SD presented a significant positive effect (p < 0.01) on resistance to extension (R50) and maximum resistance to extension (Rmax) values. For pasting properties, SS increased peak viscosity and falling number values whereas SD decreased them. On fermentation properties, SS decreased the maximum height of gaseous production and total CO2 volume production and increased the retention coefficient whereas SD presented an antagonistic effect on these parameters.

Ultrafine grinding of wheat flour: Effect of flour/starch granule profiles and particle size distribution on falling number and pasting properties.

In the present paper, the properties of different ultrafine flour samples, including particle size distribution, damaged starch content, falling number, and pasting properties, were examined. The results indicated that the particle size decreased significantly after jet milling, as the rotation speed and grinding time increased, and the damaged starch content significantly increased as the size of the flour/starch decreased; this is in contrast to the significant decrease in falling number. Significant differences in pasting temperature were observed between straight‐grade flour (68.6°C) and five ultrafine flour samples (from 86.3 to 87.9°C). We also observed significant increases in peak viscosity, trough, breakdown viscosity, final viscosity, and setback as the flour particle size decreased from 43.07 µm to 25.81 µm (D50). The same parameters significantly decreased as the flour particle size decreased from 25.81 µm to 10.15 µm (D50). Correlation analysis identified a significant negative correlation between flour particle size (D50) and damaged starch content and pasting temperature, while a significant positive correlation was found with the falling number values. The results of this work may have an important impact on the quality of processed foods.

Application of the response surface method (RSM) to optimize of the conditioning of primitive rye grain krzyca (Secale cereale var. multicaule) before milling

The aim of the current study is to optimize the conditioning process of a primitive rye called (in Polish) krzyca which has recently been reintroduced to farming. The experiment was conducted according to the Box-Behnken model with three independent variables: the temperature of water used for grain conditioning (10, 15, 20 oC), the duration of the conditioning process (4, 10, 16 h) and the final grain moisture (13, 14, 15 %). In the obtained flours, four dependent variables were determined (time of grain milling, yield of extraction flour, ash content of flour and falling number value). The obtained polynomial equations and response surface method showed on significance of the used ranges of independent values, with the highest impact noted for flour ash and falling number values.

Comparison of Russian assessment of bakery properties of wheat and determination of grain quality using mixolab

The results of quality research on the Russian soft wheat (67 samples), grown in different soil and climatic conditions and having a wide range of quality factors: the amount of gluten varied from 5.7 (Southern federal district) to 33.2% (Volga federal district), gluten quality - from 9 (Central Federal District) to 128 units. IDK (Southern Federal District), the falling-number value - from 66 to 449 s. (Volga Federal District). The rheological properties of dough were studied using the mixolab device in a classic «Chopin Wheat+» mode. According to the profiler indicators (radial chart), it was established that the test grain was characterized the average by increased water absorption capacity, maximum starch viscosity and retrogradation, as well as by reduced amylolytic activity and dough resistance. Correlation analysis established a close association of the quality factors of grain, especially of the gluten amount, with the quality factors of bread. The calculation of the pair correlation of the profiler indicators and wheat grain quality factors detected a moderate interrelation of water absorption with the gluten amount (0.466) and falling-number value (0.384), of the dough resistance with the gluten quality (-0.438), as well as a strong interrelation of the starch viscosity, amylolytic activity and retrogradation with the falling-number value (0.659; 0.821 and 0.866, respectively). There was not detected a stable interrelation of the «gluten +» index with any of the grain quality factors, but there was a loose correlation of this index with the falling-number value. Regression analysis established the strongest curvilinear relationship between the torque and the falling-number value in the areas of the starch gelatinization, jellification and retrogradation.