Facies Assemblages Research Articles

Environment Of Deposition Of The Jurassic-Cretaceous Continental Deposit In Central Pahang (Peninsular Malaysia) By Sedimentary Facies Analysis

Spatial lithofacies and lithofacies association serves as one of the reliable methods in assessing the depositional process of sediments and interpreting its depositional environment. The method of facies analysis is adapted in this study where four newly exposed stratigraphic sections along the Jerantut-Maran road in Jerantut, Central Pahang of Peninsular Malaysia were studied. Previous studies showed that the environment of deposition of these continental deposits is broadly of braided-meandering river. Sedimentological data from the newly exposed stratigraphic sections had given a better understanding on the sedimentation processes involved in these deposits where interpretation on the environment of deposition is construed up to its sub-environment. The main lithofacies recognized include conglomerate, sandstone, and fine-grained facies. The facies associations identified include (i) massive to laminated silt/mudstone, (ii) massive sandstone, (iii) thin to thick ripple to parallel laminated sandstone, (iv) conglomeratic sandstone, (v) graded channelized sandstone, (vi) coarsening upwards medium bedded sandstone and (vii) heterolithic sandstone. The different facies associations are grouped to four (4) facies assemblages showing characteristics of certain environment: (1) floodplain, (2) channel bar complex, (3) point bar and (4) crevasse splay. Floodplain facies assemblage is marked by fine-grained facies, mainly siltstone/mudstone and fine-grained sands with lower flow regime structures. Channel bar complex is identified by high energy deposits of coarse-to-medium grained sandstones often with scoured bottom and lenticular geometry. Point bar is recognized by the lateral accretion surfaces often consisting of normal graded sandstone with sharp top and bottom contact, sometimes capped with thin mudstones. Crevasse splay facies assemblage is characterized by heterolithic sandstone, dominated by flaser-wavy bedding and coarsening upwards medium bedded sandstone that is overlain by fine-grained facies of the floodplain assemblage. The overall facies based on an outcrop scale suggests general features of fluvial facies with fluctuations in flow energy. The environment of deposition is thus interpreted to be of braided river with floodplains and isolated point bar.

Forward numerical modelling constraining environmental parameters (Aptian carbonate system, E Iberia)

The facies distribution in time and space of sedimentary successions is controlled by a complex interplay between physical, chemical and biological processes, which are nowadays difficult to construe from the geological record. Numerical models constitute a valuable tool to identify and quantify such controlling factors permitting a reliable 3D extrapolation and prediction of stratigraphic and facies architectures beyond outcropping rock strata. This study assesses the roles of three controlling parameters being carbonate production rate, relative sea-level changes and terrigenous clastic sediment supply, on the evolution of an Aptian carbonate system. The SIMSAFADIM-CLASTIC, a 3D process-based sedimentary-stratigraphic forward model, was used for this evaluation. The carbonate succession modelled crops out in the western Maestrat Basin (E Iberia), and corresponded to a platform-to-basin transition comprising three depositional environment-related facies assemblages: platform top, slope and basin. Testing of geological parameters in forward modelling results in a wide range of possible 3D geological scenarios. The documented distribution of facies and sequence-stratigraphic framework combined with a virtual outcrop model were used as a reference to perform geometric (quantitative) and architectural and stacking pattern (qualitative) research by model-data comparison. The time interval modelled spans 1450 ky. The best-fit simulation run characterizes and quantifies (1) relative sea-level fluctuations recording five different genetic types of deposit (systems tracts) belonging to two depositional sequences as expected from field-data analysis, (2) a rate of terrigenous clastic sediment input ranging between 0.5 and 2.5 gr/s, and (3) a mean autochthonous carbonate production maximum rate of 0.08 m/ky. Furthermore, the quantitative and qualitative sensitivity tests carried out highlight that the fluctuation of relative sea level exerted the main control on the resulting stratigraphic and facies architectures, whereas the effect of inflowing terrigenous clastic sediment is less pronounced. Facies assemblages show different sensitivities to each parameter, being the slope carbonates more sensitive than the platform top facies to inflowing fine terrigenous sediments. On slope depositional settings, siliciclastic input also controls stratal stacking patterns and the dimensions of the carbonate bodies formed. The final 3D model allows to spot architectural features such as stacking patterns that can be misinterpreted by looking at the resulting record in the outcrop or by using other 2D approaches, and facilitates the comprehension of reservoir connectivity highlighting the occurrence of initial disconnected regressive platforms, which were later connected during a transgressive stage.

Deposition and diagenesis of the Early Permian volcanic-related alkaline playa-lake dolomitic shales, NW Junggar Basin, NW China

This study describes and interprets the mineral and facies assemblages of lacustrine shales that occurred in an ancient volcanic-related alkaline playa-lake, considering the importance of diagenetic pathways (calcification, dolomitization, borosilicate replacement, and silicification). Three laminated lithofacies (LF) have been differentiated in the Early Permian Fengcheng Formation, NW Junggar Basin: an alginite-poor, dolomite-lean, and argillaceous-rich lithofacies deposited during high lake level stages (LF-A), an alginite-moderate, dolomite-moderate, and evaporite-present lithofacies deposited during low lake level stages (LF-B), and an alginite-dense, dolomite-rich and reedmergnerite (NaBSi3O8)-rich lithofacies deposited during periods of intense hydrothermal input (LF-C). Depositional environments influenced subsequent diagenetic pathways of the three laminated lithofacies. In the shallow-water LF-B sediments, extensive evaporite crystallization, dissolution and subsequent calcification or dolomitization occurred during eodiagenesis. The deep-water LF-A sediments underwent slight eodiagenetic modifications, but developed abundant calcite-filling sub-horizontal fractures during moderate inversion and uplift in mesodiagenetic regime. With increasing depth of burial, the previous vugs-filling calcite and dolomite were preserved well or only slightly replaced by reedmergnerite in the LF-A and LF-B sediments, but intensely replaced by reedmergnerite in the LF-C sediments during mesodiagenesis. The reedmergnerite enrichment processes in the LF-C sediments were closely related to organic matter production and thermal evolution. Algae blooms induced by spring input functioned as an important media in sinking hydrothermal boron from the not very concentrated waters. Later degradation and thermal evolution of alginite released boron and organic acids into interstitial waters, which caused carbonate dissolution and promoted reedmergnerite formation. The formation of reedmergnerite during mesodiagenesis restrained silicification process of carbonate minerals in ancient volcanic-related alkaline lake deposits.

Carbonate platform evolution of the Tirgan formation during Early Cretaceous (Urgonian) in the eastern Kopet-Dagh Basin, northeast Iran: depositional environment and sequence stratigraphic significance

Tirgan formation of the Kopet-Dagh Basin (northeast Iran) represents one of the Urgonian carbonate platforms that were deposited during the Early Cretaceous time in the northern Alpine Tethys and deformed during the Alpine orogeny. In this study, six stratigraphic sections of the shallow-water platform sediments (Tirgan formation) were measured based on microfacies and fauna abundance. Detail study of petrography, fossil content, and sedimentary structures led to the identification of fifteen microfacies belonging to four facies belts including open marine, shoal, protected lagoon, and tidal flat. The sediments of the Tirgan formation exhibit calcareous green algae, abundant ooids, oysters, bryozoans, and crinoids in inner and middle platform ramp facies and planktonic bivalves and sponge spicules in outer-platform facies. Furthermore, the absence of basinal deposits and lack of evaporate evidence point to deposition under warm-temperate and humid climate conditions. Sequence stratigraphy analysis of Tirgan formation led to distinguish a single depositional sequence in all of the sections which are composed of transgressive and highstand systems tracts with sequence boundaries of type II (SB2). The lowermost lower Aptian Tirgan sequence in the study area relatively shows a similar trend in comparison with the global curve. This basin was deepened over time so that shaly and marly sediments of Sarcheshmeh formation were placed over Tirgan conformably and may suggest a drowning event that was likely related to unusual global warming. Last, this study contributes to the better understanding of the high distribution of facies assemblages in the Urgonian carbonate platforms.

Sedimentological analysis and reservoir quality of the early Cenomanian transgressive sandstones, northern Western desert, Egypt

Depicting depositional models of transgressive sandstone reservoirs is challenging due to their internal complexity and limited case studies. This study presents an example for transgressive sandstone reservoirs from the Bahariya Formation at Hayat-Yasser oil field, Shushan Basin (northern Western Desert, Egypt). The upper part of the Bahariya Formation accumulated in an estuarine setting as a consequence of a successive sea level rise. Detailed reservoir characterization, employing sequence stratigraphic and sedimentological approaches, revealed that the studied reservoir consists of a mixed siliciclastic-carbonate transgressive estuarine-shelf succession. Four conventional core samples of this succession at Khalda ridge (Shushan Basin), permit the analysis of their sedimentology and internal architecture (mesoscopic heterogeneities) along correlation lines parallel or slightly oblique to depositional dip. The succession consists of six backstepping parasequence sets that record the overall shift from tidal-dominated to wave-dominated estuaries/bays. The transgressive component of the parasequences sets includes bay mudstones, flood-tidal deltas, and shoreface/barrier deposits; while the regressive component includes estuarine point bars, bay head deltas, and tidal deltas. The reservoir properties show significant variation according to the facies assemblages. The tidally-dominated estuarine channels show low net-to-gross, as it is characterized by lenticular sandstone bodies with several lateral and vertical baffles and barriers. On the other hand, the shoreface/barrier and tidal delta sandstones show high net-to-gross and consist of amalgamated sandstone bodies with little mud barriers or baffles. Petrographically, the upper Bahariya reservoir includes intergranular and secondary porosities. The microscopic heterogeneities are mainly due to the fine grain nature, poor sorting, presence of matrix, and continuous mud barriers or baffles. Destruction of porosity, affecting the reservoir quality, occurred by silica overgrowths, ferroan calcite, grain coating chlorite, and kaolinite cementation, as well as compaction. Feldspar dissolution is the main diagenetic process responsible for the formation of secondary porosity, enhancing the reservoir quality.

Early Carboniferous HP metamorphism in the Hida Gaien Belt, Japan: Implications for the Palaeozoic tectonic history of proto‐Japan

AbstractWe report two new eclogite localities (at Kanayamadani and Shinadani) in the high‐P(HP) metamorphic rocks of the Omi area in the western most region of Niigata Prefecture, Japan, which form part of the Hida Gaien Belt, and determine metamorphic conditions and pressure–temperature (P–T) paths. The metamorphic evolution of the eclogites is characterized by a tight hairpin‐shapedP–Tpath from prograde epidote–blueschist facies to peak eclogite facies and then retrograde blueschist facies. The prograde metamorphic stage is characterized by various amphibole (winchite, barroisite, glaucophane) inclusions in garnet, whereas the peak eclogite facies assemblage is characterized by omphacite, garnet, phengite and rutile. PeakP–Tconditions of the eclogites were estimated to be ~600°C and up to 2.0 GPa by conventional cation‐exchange thermobarometry, Ti‐in‐zircon thermometry and quartz inclusion Raman barometry respectively. However, the Raman spectra of carbonaceous material thermometry of metapelites associated with the eclogites gave lower peak temperatures, possibly due to metamorphism at different conditions before being brought together during exhumation. The blueschist facies overprint following the peak of metamorphism is recognized by the abundance of glaucophane in the matrix. Zircon grains in blueschist facies metasedimentary samples from two localities adjacent to the eclogites have distinct oscillatory‐zoned cores and overgrowth rims. Laser ablation inductively coupled plasma mass spectrometry U–Pb ages of the detrital cores yield a wide range between 3,200 and 400 Ma, with a peak at 600–400 Ma. In the early Palaeozoic, proto‐Japan was located along the continental margin of the South China craton, providing the source of the older population of detrital zircon grains (3,200–600 Ma) deposited in the trench‐fill sediments. In addition, subduction‐related magmatismc. 500–400 Ma is recorded in the crust below proto‐Japan, which might have been the source for the younger detrital zircon grains. The peak metamorphic age was constrained by SHRIMP dating of the overgrowth rims, yielding Tournaisian ages of 347 ± 4 Ma, suggesting subduction in the early Carboniferous. Our results provide clear constraints on the initiation of subduction, accretion and the development of an arc‐trench system along the active continental margin of the South China craton and help to unravel the Palaeozoic tectonic history of proto‐Japan.

Deconstructing Earth's oldest ichnofossil record from the Pilbara Craton, West Australia: Implications for seeking life in the Archean subseafloor.

Microtextures of titanite (CaTiSiO5 ) in exceptionally preserved Archean pillow lavas have been proposed as the earliest examples of microbial ichnofossils. An origin from microbial tunneling of seafloor volcanic glass that is subsequently chloritized and the tunnels infilled by titanite has been argued to record the activities of subseafloor microbes. We investigate the evidence in pillow lavas of the 3.35Ga Euro Basalt from the Pilbara Craton, Western Australia, to evaluate the biogenicity of the microtextures. We employ a combination of light microscopy and chlorite mineral chemical analysis by EPMA (electron probe micro-analysis) to document the environment of formation and analyze their ultrastructure using FIB-TEM (focussed ion beam combined with transmission electron microscopy) to investigate their mode of growth. Petrographic study of the original and re-collected material identified an expanded range of titanite morphotypes along with early anatase growth forming chains and aggregates of coalesced crystallites in a sub-greenschist facies assemblage. High-sensitivity mapping of FIB lamellae cut across the microtextures confirm that they are discontinuous chains of coalesced crystallites that are highly variable in cross section and contain abundant chlorite inclusions, excluding an origin from the mineralization of previously hollow microtunnels. Comparison of chlorite mineral compositions to DSDP/IODP data reveals that the Euro Basalt chlorites are similar to recent seafloor chlorites. We advance an abiotic origin for the Euro Basalt microtextures formed by spontaneous nucleation and growth of titanite and/anatase during seafloor-hydrothermal metamorphism. Our findings reveal that the Euro Basalt microtextures are not comparable to microbial ichnofossils from the recent oceanic crust, and we question the evidence for life in these Archean lavas. The metamorphic reactions that give rise to the growth of the Euro Basalt microtextures could be commonplace in Archean pillow lavas and need to be excluded when seeking traces of life in the subseafloor on the early Earth.

Multiple P–T–d–t paths reveal the evolution of the final Nuna assembly in northeast Australia

AbstractThe final assembly of the Mesoproterozoic supercontinent Nuna was marked by the collision of Laurentia and Australia at 1.60 Ga, which is recorded in the Georgetown Inlier of NE Australia. Here, we decipher the metamorphic evolution of this final Nuna collisional event using petrostructural analysis, major and trace element compositions of key minerals, thermodynamic modelling, and multi‐method geochronology. The Georgetown Inlier is characterised by deformed and metamorphosed 1.70–1.62 Ga sedimentary and mafic rocks, which were intruded by c. 1.56 Ga old S‐type granites. Garnet Lu–Hf and monazite U–Pb isotopic analyses distinguish two major metamorphic events (M1 at c. 1.60 Ga and M2 at c. 1.55 Ga), which allows at least two composite fabrics to be identified at the regional scale—c. 1.60 Ga S1 (consisting in fabrics S1a and S1b) and c. 1.55 Ga S2 (including fabrics S2a and S2b). Also, three tectono‐metamorphic domains are distinguished: (a) the western domain, with S1 defined by low‐P (LP) greenschist facies assemblages; (b) the central domain, where S1 fabric is preserved as medium‐P (MP) amphibolite facies relicts, and locally as inclusion trails in garnet wrapped by the regionally dominant low‐P amphibolite facies S2 fabric; and (c) the eastern domain dominated by upper amphibolite to granulite facies S2 foliation. In the central domain, 1.60 Ga MP–medium‐T (MT) metamorphism (M1) developed within the staurolite–garnet stability field, with conditions ranging from 530–550°C at 6–7 kbar (garnet cores) to 620–650°C at 8–9 kbar (garnet rims), and it is associated with S1 fabric. The onset of 1.55 Ga LP–high‐T (HT) metamorphism (M2) is marked by replacement of staurolite by andalusite (M2a/D2a), which was subsequently pseudomorphed by sillimanite (M2b/D2b) where granite and migmatite are abundant. P–T conditions ranged from 600 to 680°C and 4–6 kbar for the M2b sillimanite stage. 1.60 Ga garnet relicts within the S2 foliation highlight the progressive obliteration of the S1 fabric by regional S2 in the central zone during peak M2 metamorphism. In the eastern migmatitic complex, partial melting of paragneiss and amphibolite occurred syn‐ to post‐ S2, at 730–770°C and 6–8 kbar, and at 750–790°C and 6 kbar, respectively. The pressure–temperature–deformation–time paths reconstructed for the Georgetown Inlier suggest a c. 1.60 Ga M1/D1 event recorded under greenschist facies conditions in the western domain and under medium‐P and medium‐T conditions in the central domain. This event was followed by the regional 1.56–1.54 Ga low‐P and high‐T phase (M2/D2), extensively recorded in the central and eastern domains. Decompression between these two metamorphic events is ascribed to an episode of exhumation. The two‐stage evolution supports the previous hypothesis that the Georgetown Inlier preserves continental collisional and subsequent thermal perturbation associated with granite emplacement.

Variscan eclogites from the Argentera–Mercantour Massif (External Crystalline Massifs, SW Alps): a dismembered cryptic suture zone

We document structural, geochemical, petrological and 40Ar/39Ar geochronological data performed on Variscan eclogites from the Argentera–Mercantour Massif, southwestern Alps. Based on the high-resolution field mapping, we present new eclogite occurrences and discuss the relationships between eclogites and surrounding migmatites. We recognized for the first time preserved eclogite facies assemblages. Trace elements and REE patterns establish that eclogites protoliths are MORBs contaminated by continental crust. Standard thermobarometry and thermodynamic modeling are consistent with P–T values of 640–740 °C for 1.5 ± 0.25 GPa, coherent with paleo-geotherms predicted for warm subduction of oceanic crust. We interpret these eclogites as a dismembered cryptic suture zone. 40Ar/39Ar dating on amphiboles yields an age of 339.7 ± 12 Ma for eclogite retrogression under amphibolite facies conditions. All these data are combined to link the Argentera–Mercantour Massif in the tectonic framework of both pre-Mesozoic Alpine basement and European southern Variscides.

Provenance of the Late Permian Xuanwei Formation in the Upper Yangtze Block: Constraints from the Sedimentary Record and Tectonic Implications

Xuanwei Formation is composed of mudstone, siltstone, and sandstone, with local conglomerate. However, its provenance and tectonic setting have been scarcely studied. In this paper, we use sedimentology, electron probe microanalysis (EPMA), and detrital zircon dating to investigate its source area and depositional tectonic setting. The facies assemblages indicate that it formed in alluvial fan and fluvial river sedimentary environments. The strata thicknesses and facies distribution indicate that the sediment supply was from the west. The results of EPMA show that chromian spinels within the sediments are characterized by high Cr# and varying Mg#. Discrimination plots suggest that these spinels were sourced from large igneous province (LIP) magmatic rocks. The laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) U–Pb chronology of detrital zircons suggests that the sediments were derived from intermediate–acid igneous rocks dating back to 251–260 Ma. We could, therefore, conclude that the provenance of the Xuanwei Formation is from Emeishan basalt and synchronous felsic igneous rocks, which is consistent with the composition of the detrital framework. The detrital zircon dates also suggest that felsic magmatism occurred during the Late Permian, not after the eruption of the Emeishan basalt. Based on the sedimentary successions and provenance analysis, the tectonic setting for Xuanwei Formation deposition was a volcanic rifted margin.

Unconformities, neptunian dykes and mass-transport deposits as an evidence for Early Cretaceous syn-sedimentary tectonics: new insights from the Central Apennines

This work presents the results of a geological mapping project performed on the Narni-Amelia Ridge (Central Apennines, Italy). Fieldwork was aimed at defining the rift and post-rift architecture of the Jurassic to Cretaceous part of the Umbria-Marche-Sabina basin succession, which is characterised by Jurassic rift-related pelagic carbonate platform (PCP)/basin systems. While the effects of the Early Jurassic rifting are well documented in the regional literature, a phase of post-rift extensional tectonics in the late Early Cretaceous is a relatively under-investigated subject. This normal faulting was apparently widespread at a super-regional scale, and the Narni- Amelia Ridge carries direct and indirect evidence for this episode of revived deformation:(i) the occurrence of limestone megabreccias (Mt. Cosce Breccia) resting unconformably, through an erosional surface, on a Jurassic (and Cretaceous) horst-block. Stepped unconformities are associated with spur and groove geometries of the escarpment, suggesting topographic backstepping due to rock- fall processes;(ii) millimetre to decametre-scale neptunian dykes and sills made of Mt. Cosce Breccia and of Maiolica pelagites. These fractures cut the footwall-block of Cretaceous faults, made of Calcare Massiccio Fm (Hettangian), sub-orthogonal to its master- bedding. Dykes are associated with tension gashes filled with chert (silicification of fracture zones). The steep walls of those neptunian dykes filled with Maiolica-type deposits also exhibit a thin chert band;(iii) the onlap of Aptian-Albian Marne a Fucoidi Fm on the Hettangian Calcare Massiccio Fm. This is an unicum in the whole Umbria- Marche-Sabina Domain;(iv) the presence of mass-transport deposits (slumps and debris flows) in the uppermost part of the Maiolica Fm and lower part of the Marne a Fucoidi Fm.These stratigraphic anomalies are collectively interpreted as the products of normal faulting, which caused the retreat of the original Jurassic margins of the PCPs, rejuvenating the submarine palaeotopography. A middle Barremian age for this phase of syn- sedimentary extension is indicated by the nannofossil assemblage of Maiolica-type facies sampled from the Mt. Cosce Breccia and from the neptunian dykes.

Geochemical and Geochronological Discrimination of Biotite Types at the Detour Lake Gold Deposit, Canada

The Detour Lake deposit is at a faulted contact between mafic volcanic and siliciclastic to volcaniclastic rocks, differing from other orogenic Au deposits in the dominantly greenschist facies Abitibi region, by possessing amphibolite facies assemblages. Consequently, typical indicator minerals for mineralization, like secondary biotite, may not be useful for locating ore zone, due to the challenge of distinguishing hydrothermal versus metamorphic and magmatic phases. Herein, geochemical and 40Ar/39Ar geochronological data are presented for biotite from mineralized and barren (distal) magmatic rocks to characterize potential geochemical and geochronological variations between biotite types. Petrological observations reveal four biotite types: (1) Biotite hosted in mineralized, sulphidized quartz-calcite veins, (2) halo biotite at the margins of the aforementioned veins; (3) host rock biotite defining the foliation within the mafic volcanic rocks of the deposit; and (4) biotite defining the foliation within the barren meta-plutonic host rocks. Chemical analysis reveals a lower Ti- and higher Mg-content of mineralized biotite types, indicative of secondary hydrothermal processes. 40Ar/39Ar ages for all biotite types (2600–2390 Ma) post-date the main syn-deformation mineralization event at Detour Lake (≤2700 Ma). These results suggest chemical variations within biotite are due to a post-mineralization hydrothermal event, thus biotite should be used cautiously as a vector for gold mineralization in amphibolite facies terranes.

Three‐fold nature of coastal progradation during the Holocene eustatic highstand, Po Plain, Italy – close correspondence of stratal character with distribution patterns

AbstractAlthough general trends in transgressive to highstand sedimentary evolution of river‐mouth coastlines are well‐known, the details of the turnaround from retrogradational (typically estuarine) to aggradational–progradational (typically coastal/deltaic) stacking patterns are not fully resolved. This paper examines the middle to late Holocene eustatic highstand succession of the Po Delta: its stratigraphic architecture records a complex pattern of delta outbuilding and coastal progradation that followed eustatic stabilization, since around 7·7 cal kyr bp. Sedimentological, palaeoecological (benthic foraminifera, ostracods and molluscs) and compositional criteria were used to characterize depositional conditions and sediment‐dispersal pathways within a radiocarbon‐dated chronological framework. A three‐stage progradation history was reconstructed. First, as soon as eustasy stabilized (7·7 to 7·0 cal kyr bp), rapid bay‐head delta progradation (ca5 m year−1), fed mostly by the Po River, took place in a mixed, freshwater and brackish estuarine environment. Second, a dominantly aggradational parasequence set of beach‐barrier deposits in the lower highstand systems tract (7·0 to 2·0 cal kyr bp) records the development of a shallow, wave‐dominated coastal system fed alongshore, with elongated, modestly crescent beaches (ca2·5 m year−1). Third, in the last 2000 years, the development of faster accreting and more rapidly prograding (up toca15 m year−1) Po delta lobes occurred into 30 m deep waters (upper highstand systems tract). This study documents the close correspondence of sediment character with stratal distribution patterns within the highstand systems tract. Remarkable changes in sediment characteristics, palaeoenvironments and direction of sediment transport occur across a surface named the ‘A–P surface’. This surface demarcates a major shift from dominantly aggradational (lower highstand systems tract) to fully progradational (upper highstand systems tract) parasequence stacking. In the Po system, this surface also reflects evolution from a wave‐dominated to river‐dominated deltaic system. Identifying the A–P surface through detailed palaeoecological and compositional data can help guide interpretation of highstand systems tracts in the rock record, especially where facies assemblages and their characteristic geometries are difficult to discern from physical sedimentary structures alone.

Ice‐margin fluctuation sequences and grounding zone wedges: The record of the Late Palaeozoic Ice Age in the eastern Karoo Basin (Dwyka Group, South Africa)

AbstractIn the eastern part of the Karoo Basin of South Africa, the sedimentary record of the Late Palaeozoic Ice Age, the Dwyka Group, consists of an up to 200 m thick accumulation of massive to crudely stratified diamictite occasionally interstratified with siltstone, sandstone and conglomerate horizons. Three distinct sedimentary units, separated by intervening glacial erosion surfaces, are viewed as ice‐margin fluctuation sequences. The lowermost one, resting on highly uneven, glacially abraded Archaean basement, has been interpreted as a grounding zone wedge deposited after the retreat and stabilization of the ice margin after the inundation of the Karoo Basin. The grounding zone wedge interpretation is based on its thickness (up to 100 m), the dominance of diamictite, and its facies assemblage and inferred depositional processes (rain‐out of debris, dropstone dumping, mass and debris flow, till). Overlying the grounding zone wedge, deposits are sedimentary units interpreted as glaciofluvial or ice‐contact delta and grounding zone wedges, respectively. By analogy with Quaternary sedimentary sequences, deposition of the Dwyka Group in the study area might have been very rapid (tens to hundreds of thousand years) and may hence correlate with the ultimate deglacial sequence of the Western Karoo Basin, as both successions are covered by the postglacial Ecca Group. Although commonly observed and imaged on modern, high‐latitude continental shelves, grounding zone wedges have never been interpreted in the ancient geological record. This paper therefore outlines a model defining criteria necessary for their identification.

Late Paleoproterozoic tectonic evolution of the Olongbuluke Terrane, northern Qaidam, China: Constraints from stratigraphy and detrital zircon geochronology

The late Paleoproterozoic tectonic processes of the Olongbuluke Terrane in the northern Qaidam of northwestern China remain unclear due to rare contemporaneous metamorphic and magmatic records. The sedimentary succession of the Quanji Group preserves detailed geological information of erosion, transportation and deposition, which is pivotal for constraining the late Paleoproterozoic tectonics of the Olongbuluke Terrane. The Quanji Group comprises conglomerate-sandstone of nearshore facies and mudstone-dolomite of tidal flat facies in the lower and upper sections, respectively, displaying an upward fining and transgression sequence. Together with featured sedimentary structures, the facies assemblage and vertical sequence suggest that the Olongbuluke Terrane has experienced a basin evolution of initial rifting, rifting climax and passive continental margin during ∼1780–1640 Ma. Four samples collected from the low to top positions within the profiles yield quite similar detrital zircon age patterns with two distinct clusters of 2510–2216 Ma and 2062–1728 Ma. These detrital zircon ages coincide with those of magmatism–metamorphism in the basement of Olongbuluke Terrane, suggesting the detritus were sourced from the Olongbuluke Terrane itself. The zircons with ages of 2510–2216 Ma display εHf (t) ratios from −2.29 to +6.81 and corresponding TDM2 ages of ∼3.1 to 2.5 Ga, suggesting they were originated from reworking of the Meso- to Neoarchean juvenile crust with mantle inputs or mantle derived rocks. In comparison, the zircons with ages of 2062–1728 Ma exhibit εHf (t) ratios ranging from −17.4 to −0.1 and TDM2 ages of ∼3.6 to 2.5 Ga, indicating their origin in partial melting of the Paleo- to Neoarchean crust. The two sets of zircons display TDM2 ages with three peaks of ∼2.9 Ga, ∼2.7 Ga and ∼2.5 Ga. Comparing with those of the other main blocks all over the world, all the above detrital zircon U-Pb ages and TDM2 ages together with the late Paleoproterozoic tectono-stratigraphic processes suggest that the Olongbuluke Terrane has a Precambrian tectonic affinity close to the western North China Craton.

The lithofacies organization of fluvial channel deposits: A meta-analysis of modern rivers

Environmental interpretations of subsurface fluvial successions are commonly based on facies observations from core and are often attempted by generalist geologists by reference to classic facies models. However, for fluvial channel deposits, the value of observations on lithofacies proportions for interpretations of depositional environment has yet to be assessed quantitatively. Here, a test is presented that is based on a comparative study of facies data from 77 reaches of 46 modern rivers. The analysis is undertaken on datasets from published case studies stored in a sedimentological database, with consideration of causes for observational bias, and with particular attention paid to sandy lithofacies. The observed variability in the proportion of facies assemblages in the channel deposits of sandy river systems is quantified for classes of environments categorized according to channel pattern (braided, low sinuosity, meandering), climatic setting (arid to perhumid), and discharge regime (ephemeral to perennial). By capturing the variability in facies organization within fluvial systems of certain types, these outputs serve as facies models that provide a measure of uncertainty to sedimentological interpretations. Concurrently, the statistical analysis presented enables a test of the significance of relationships between the relative proportions of channel lithofacies and parameters that either represent controlling factors (e.g., water-discharge characteristics) or covariates (e.g., channel pattern). For classes of river systems grouped by channel pattern, climate, and discharge regime, emerging features of facies organization can be identified. Statistically, it is observed that relationships exist (i) between channel pattern and the frequency of the preserved expression of bedforms, and (ii) between controls on river hydrology (climate, discharge regime and seasonal variability) and the record of upper and lower flow-regime conditions. Thus, the results corroborate existing qualitative facies models in some respects. However, observations of the relative dominance of facies in channel deposits demonstrate limited value for interpretations or predictions in subsurface or outcrop studies, as variability within each type of depositional system is significant. Corehole data of fluvial channel deposits may be commonly overinterpreted.

Development of a streamflow-dominated alluvial-fan system in the southwestern margin of Gyeongsang Basin (Lower Cretaceous): implications for initial basin-fill history

This paper focuses on the initial basin-fill processes in an extensional nonmarine back-arc basin. Sedimentary facies analysis in the southwestern part of the Gyeongsang Basin (Jinju Subbasin), Hapcheon area reveals that the succession consists of four facies assemblages. The assemblage I mainly consists of disorganized conglomerate deposited by flash floods in a streamflow-dominated alluvial fan. The assemblage II is dominated by stratified conglomerates and massive, stratified, and cross-stratified sandstones, showing architecture of stacked channels and bars. The assemblage III largely comprises massive, stratified to laminated, and trough cross-stratified sandstones, which are organized into channel-fill and bar-accretion structures. It most likely formed in sandy sinuous rivers. The assemblage IV comprises gray mudstone interlayered with fine sandstone, representing water-logged floodplains. Conglomerate and sandstone bodies formed in the fluvial systems appear to be randomly distributed within floodplain fines, displaying a great lateral and vertical lithologic variation. This study helps understand the complexity of basin-fill history, i.e., switching of fluvial networks in time and space, in contrast to the simple notion of margin-parallel stacking of lithostratigraphic units.

Remarkably uniform oxygen isotope systematics for co-existing pairs of gem-spinel and calcite in marble, with special reference to Vietnamese deposits

Oxygen isotope systematics for co-existing pairs of gem-spinel and calcite in marble from Vietnam and other worldwide deposits have been determined in order to characterize the O-isotope fractionation between calcite and spinel. In Vietnam, the Δ18Occ–sp (=3.7±0.1‰ for six samples from the An Phu and Cong Troi deposits) is remarkably constant. The combination of these data with those obtained on calcite–spinel pairs of Paigutan (Nepal, n=2), Ipanko (Tanzania, n=1), and Mogok (Myanmar,=2) are also consistent with an overall Δ18Occ–sp of 3.6±0.3‰ for all the spinel samples (n=11). The straight line correlation δ18Occ=0.96 δ18Osp+4.4 is excellent despite their worldwide geographic spread. The increment method of calculating oxygen isotope fractionation gave a geologically unreasonable temperature of formation for both minerals at 1374°C when compared to temperatures obtained by mineral assemblage equilibrium of these marble type deposits, between 610 and 750°C. The constant Δ18Occ–sp reflects a constant temperature for this amphibolite facies assemblage, whose current best estimate is calculated at 620±40°C, but unquantified uncertainties remain.

Late Devonian contact metamorphism and a possible upper age to gold mineralisation in the northernmost portion of the Reefton Goldfield

ABSTRACTThe 378–370 Ma Dunphy Granite has contact metamorphosed Greenland Group metasedimentary rocks in the Awarau/Larry River valley in the northernmost portion of the Reefton Goldfield in Westland. Hornblende hornfels facies Greenland Group occurs up to ∼1300 m of the granite contact, followed by albite-epidote hornfels facies assemblages between ∼1300 and 2000 m from the granite, after which the rocks retain Early Paleozoic greenschist facies assemblages. The historic Caledonian goldmine is located on a fault zone within hornfels facies rocks. There is a complex mineralisation paragenesis in samples obtained from the mine area in which quartz, gold, arsenopyrite, pyrite with minor galena and chalcopyrite formed in quartz veins and brecciated Greenland Group. Fractures in the early-formed minerals and rocks contain quartz, minor galena and molybdenite and oligoclase and biotite. Although the poor exposure and collapsed mine workings prohibit firmly establishing the relationship of mineralisation to the contact aureole, hand specimen and optically observed textures indicate that mineralisation is hosted in a brittle fault zone that most likely cuts across the hornfels facies rocks. Mineralisation is therefore interpreted to post-date formation of the Late Devonian contact aureole at 378–370 Ma.

Eclogites in peridotite massifs in the Western Gneiss Region, Scandinavian Caledonides: Petrogenesis and comparison with those in the Variscan Moldanubian Zone

Eclogite lenses and boudins are volumetrically minor, but petrologically important, features of peridotite massifs worldwide. In the Western Gneiss Region of the Scandinavian Caledonides, eclogites in the Almklovdalen and Raubergvik peridotites originated as basaltic to picrobasaltic dikes, comprising both olivine–normative and nepheline–normative types, with a wide variation in Mg–number from 34 to 65. Positive anomalies for Pb and Sr and negative anomalies for Zr and Hf reflect a subduction signature in the basic melts, and rare–earth element modelling requires 20% to 70% fractional crystallization, combined with 20% to 70% assimilation of peridotite. Clinopyroxenes in eclogites have a wide variation in εNd(0) from +68 to −26, which is comparable to that for associated garnet peridotites and pyroxenites, +55 to −38, and a range in 87Sr/86Sr from 0.7021 to 0.7099, which is much larger than that in peridotites and pyroxenites, 0.7014 to 0.7033.Plagioclase and amphibole inclusions in eclogite garnet provide evidence for prograde metamorphism, which attained a maximum temperature of ~775 °C and pressure of ~25 kb. Such conditions are allofacial with those of associated garnet peridotites and pyroxenites, which equilibrated at ~825 °C and ~37 kb. Eclogites yield mixed Sm-Nd isochron ages, as do the peridotites and pyroxenites, but ages in eclogites are <1000 Ma, and those in peridotites and pyroxenites are >1000 Ma. Three eclogites yield Ordovician U-Pb ages for rutile at 440 ± 12, 445 ± 51, and 480 ± 29 Ma, which are coeval with the Taconic Orogeny and are consistent with a Laurentian provenance for the host peridotites.Eclogites in both Norwegian and Czech peridotites originated from melts passing through a mantle wedge above a subduction zone, and both suites exhibit subduction geochemical signatures, although they differ dramatically in petrogenesis. Eclogites in Norwegian peridotites initially crystallized as relatively low–pressure, plagioclase–bearing basaltic or gabbroic dikes and subsequently recrystallized to high–pressure eclogite, whereas most eclogites in Variscan Moldanubian peridotites crystallized directly from magmas at high pressure to produce eclogite facies assemblages.