Facet Capsular Ligament Research Articles

Stretch-induced network reconfiguration of collagen fibres in the human facet capsular ligament.

Biomaterials can display complex spatial patterns of cellular responses to external forces. Revealing and predicting the role of these patterns in material failure require an understanding of the statistical dependencies between spatially distributed changes in a cell's local biomechanical environment, including altered collagen fibre kinematics in the extracellular matrix. Here, we develop and apply a novel extension of network science methods to investigate how excessive tensile stretch of the human cervical facet capsular ligament (FCL), a common source of chronic neck pain, affects the local reorganization of collagen fibres. We define collagen alignment networks based on similarity in fibre alignment angles measured by quantitative polarized light imaging. We quantify the reorganization of these networks following macroscopic loading by describing the dynamic reconfiguration of network communities, regions of the material that display similar fibre alignment angles. Alterations in community structure occur smoothly over time, indicating coordinated adaptation of fibres to loading. Moreover, flexibility, a measure of network reconfiguration, tracks the loss of FCL's mechanical integrity at the onset of anomalous realignment (AR) and regions of AR display altered community structure. These findings use novel network-based techniques to explain abnormal collagen fibre reorganization, a dynamic and coordinated multivariate process underlying tissue failure.

BIOMECHANICS OF CERVICAL SPINE FOLLOWING IMPLANTATION OF A SEMI-CONSTRAINED ARTIFICIAL DISC WITH UPWARD CENTER OF ROTATION: A FINITE ELEMENT INVESTIGATION

The objective of this study was to evaluate the effects of a semi-constrained artificial disc with upward instantaneous center of rotation (ICR) on the biomechanics of the cervical spine. A three-dimensional nonlinear finite element model of the lower cervical spine (C4–C7) was developed using computed tomography (CT) data. The FE model was validated by comparing it to previously published experimental results for flexion-extension, lateral bending and axial rotation movements. The validated model was then altered to include prosthesis at the C5–C6 level. A hybrid test protocol was used to investigate the effects of total disc replacement. The results of this study showed that this artificial disc can help maintain the same range of motion (ROM) and intradiscal pressure as the intact model for most loading conditions. We also found that loads on the facet joints increased dramatically at index level. The capsular ligaments were also found to transmit more tension during flexion at implanted level. Although the artificial disc with upward ICR was found to restore normal kinematics, and prevented increases in intradiscal pressure, it was also associated with an overloading of the facet joints and capsular ligaments leading to potentially undesirable outcomes in the long term.

Marker-Free Tracking of Facet Capsule Motion Using Polarization-Sensitive Optical Coherence Tomography.

We proposed and tested a method by which surface strains of biological tissues can be captured without the use of fiducial markers by instead, utilizing the inherent structure of the tissue. We used polarization-sensitive optical coherence tomography (PS OCT) to obtain volumetric data through the thickness and across a partial surface of the lumbar facet capsular ligament during three cases of static bending. Reflectivity and phase retardance were calculated from two polarization channels, and a power spectrum analysis was performed on each a-line to extract the dominant banding frequency (a measure of degree of fiber alignment) through the maximum value of the power spectrum (maximum power). Maximum powers of all a-lines for each case were used to create 2D visualizations, which were subsequently tracked via digital image correlation. In-plane strains were calculated from measured 2D deformations and converted to 3D surface strains by including out-of-plane motion obtained from the PS OCT image. In-plane strains correlated with 3D strains (R(2) ≥ 0.95). Using PS OCT for marker-free motion tracking of biological tissues is a promising new technique because it relies on the structural characteristics of the tissue to monitor displacement instead of external fiducial markers.

Combining displacement field and grip force information to determine mechanical properties of planar tissue with complicated geometry.

Performing planar biaxial testing and using nominal stress-strain curves for soft-tissue characterization is most suitable when (1) the test produces homogeneous strain fields, (2) fibers are aligned with the coordinate axes, and (3) strains are measured far from boundaries. Some tissue types [such as lamellae of the annulus fibrosus (AF)] may not allow for these conditions to be met due to their natural geometry and constitution. The objective of this work was to develop and test a method utilizing a surface displacement field, grip force-stretch data, and finite-element (FE) modeling to facilitate analysis of such complex samples. We evaluated the method by regressing a simple structural model to simulated and experimental data. Three different tissues with different characteristics were used: Superficial pectoralis major (SPM) (anisotropic, aligned with axes), facet capsular ligament (FCL) (anisotropic, aligned with axes, bone attached), and a lamella from the AF (anisotropic, aligned off-axis, bone attached). We found that the surface displacement field or the grip force-stretch data information alone is insufficient to determine a unique parameter set. Utilizing both data types provided tight confidence regions (CRs) of the regressed parameters and low parameter sensitivity to initial guess. This combined fitting approach provided robust characterization of tissues with varying fiber orientations and boundaries and is applicable to tissues that are poorly suited to standard biaxial testing. The structural model, a set of C++ finite-element routines, and a Matlab routine to do the fitting based on a set of force/displacement data is provided in the on-line supplementary material.

Commentary: Posterior tension band wiring and instrumentation for thoracolumbar flexion-distraction injuries.

Tension band wiring has been used to re-appose bone fragments, secure ligaments or tendon to bone, and improve stability in weakened constructs. 1–5 The spinous ligaments, ligamentum flavum, facet capsular ligament, and posterior longitudinal ligaments collectively form the natural posterior spinal tension band. The integrity of the posterior spinal ligamentous structures is critical, as they function to limit translation (anterior and posterior), flexion, and rotation of the spine. Flexiondistraction injuries (FDIs) lead to posterior disruption and elongation, and hyperextension with or without shear causing anterior disruption and elongation. 6 Proper evaluation of the posterior elements is important for the diagnosis of FDIs. Magnetic resonance imaging has high diagnostic accuracy and inter-observer reliability. 7 Reconstruction of the posterior tension band combined with spinal instrumentation for FDIs improves stability and aids early rehabilitation. 8 Cables, wires, and other strands have been used to re-establish posterior tension band stability. 9–13 In this issue, Hasankhani and Omidi-Kashani 8

Spinal neuronal plasticity is evident within 1 day after a painful cervical facet joint injury

Excessive stretch of the cervical facet capsular ligament induces persistent pain and spinal plasticity at later time points. Yet, it is not known when such spinal modifications are initiated following this painful injury. This study investigates the development of hyperalgesia and neuronal hyperexcitability in the spinal cord after a facet joint injury. Behavioral sensitivity was measured in a model of painful C6/C7 facet joint injury in the rat, and neuronal hyperexcitability in the spinal cord was evaluated at 6h and 1 day after injury or a sham procedure, in separate groups. Extracellular recordings of C6/C7 dorsal horn neuronal activity (229 neurons) were used to quantify spontaneous and evoked firing. Rats exhibited no change in sensitivity to mechanical stimulation of the forepaw at 6h, but did exhibit increased sensitivity at 1 day after injury (p=0.012). At 6h, both spontaneous neuronal activity and firing evoked by light brushing, pinch, and von Frey filaments (1.4–26g) applied at the forepaw were not different between sham and injury. At 1 day, spontaneous firing was noted in a greater number of neurons after injury than sham (p<0.04). Evoked firing was also increased 1 day after injury compared to normal and sham (p<0.03). Dorsal horn hyperexcitability and increased spontaneous firing developed between 6 and 24h after painful facet injury, suggesting that the development of hyperalgesia parallels dorsal horn hyperexcitability following mechanical facet joint injury, and these spinal mechanisms are initiated as early as 1 day after injury.

The Prostaglandin E2 Receptor, EP2, Is Upregulated in the Dorsal Root Ganglion After Painful Cervical Facet Joint Injury in the Rat

This study implemented immunohistochemistry to assay prostaglandin E2 (PGE2) receptor EP2 expression in the dorsal root ganglion (DRG) of rats after painful cervical facet joint injury. To identify if inflammatory cascades are induced in association with cervical facet joint distraction-induced pain by investigating the time course of EP2 expression in the DRG. The cervical facet joint is a common source of neck pain, and nonphysiological stretch of the facet capsular ligament can initiate pain from the facet joint via mechanical injury. PGE2 levels are elevated in painful inflamed and arthritic joints, and PGE2 sensitizes joint afferents to mechanical stimulation. Although in vitro studies suggest that the EP2 receptor subtype contributes to painful joint disease, the EP2 response has not been investigated for any association with painful mechanical joint injury. Separate groups of male Holtzman rats underwent either a painful cervical facet joint distraction injury or sham procedure. Bilateral forepaw mechanical allodynia was assessed, and immunohistochemical techniques were used to quantify EP2 expression in the DRG at days 1 and 7. Facet joint distraction induced mechanical allodynia that was significant (P < 0.024) at all time points. Painful joint injury also significantly elevated total EP2 expression in the DRG at day 1 (P = 0.009), which was maintained at day 7 (P < 0.001). Neuronal expression of EP2 in the DRG was only increased over sham levels at day 1 (P = 0.013). Painful cervical facet joint distraction induces an immediate and sustained increase of EP2 expression in the DRG, implicating peripheral inflammation in the initiation and maintenance of facet joint pain. The transient increase in neuronal EP2 suggests, as in other painful joint conditions, that after joint injury nonneuronal cells may migrate to the DRG, some of which likely express EP2.

The failure response of the human cervical facet capsular ligament during facet joint retraction

Studies implicate the cervical facet joint and its capsule as a primary anatomical site of injury during whiplash exposures to the neck. Although the facet joint is known to undergo stretch as the superior vertebra is retracted relative to the inferior vertebra during the whiplash kinematic, the response of the facet capsular ligament and its microstructure during failure in joint retraction is unknown. Polarized light imaging and vector correlation analysis were used to measure the collagen fiber alignment in the human capsular ligament, together with traditional mechanical metrics, during joint retraction sufficient to induce ligament failure. Anomalous fiber realignment occurs at 2.95±1.66mm of displacement, which is not different from the displacement when the ligament first yields (2.77±1.55mm), but is significantly lower (p=0.016) than the displacement at tissue failure (5.40±1.65mm). The maximum principal strain at the first detection of anomalous fiber realignment (0.66±0.39) also is significantly lower (p=0.046) than the strain at failure (1.39±0.64), but is not different from the strains at yield or partial failure. The onset of collagen fiber realignment determined in this study corresponds to the ligament's yielding and supports assertions that the facet capsule can undergo tissue injury during joint retraction. Further, such microstructural responses may indicate tissue damage in the absence of rupture.

Preconditioning is Correlated With Altered Collagen Fiber Alignment in Ligament

Although the mechanical phenomena associated with preconditioning are well-established, the underlying mechanisms responsible for this behavior are still not fully understood. Using quantitative polarized light imaging, this study assessed whether preconditioning alters the collagen fiber alignment of ligament tissue, and determined whether changes in fiber organization are associated with the reduced force and stiffness observed during loading. Collagen fiber alignment maps of facet capsular ligaments (n = 8) were generated before and after 30 cycles of cyclic tensile loading, and alignment vectors were correlated between the maps to identify altered fiber organization. The change in peak force and tangent stiffness between the 1st and 30th cycle were determined from the force-displacement response, and the principal strain field of the capsular ligament after preconditioning was calculated from the fiber alignment images. The decreases in peak ligament force and tangent stiffness between the 1st and 30th cycles of preconditioning were significantly correlated (R ≥ 0.976, p < 0.0001) with the change in correlation of fiber alignment vectors between maps. Furthermore, the decrease in ligament force was correlated with a rotation of the average fiber direction toward the direction of loading (R = -0.730; p = 0.0396). Decreases in peak force during loading and changes in fiber alignment after loading were correlated (p ≤ 0.0157) with the average principal strain of the unloaded ligament after preconditioning. Through the use of a vector correlation algorithm, this study quantifies detectable changes to the internal microstructure of soft tissue produced by preconditioning and demonstrates that the reorganization of the capsular ligament's collagen fiber network, in addition to the viscoelasticity of its components, contribute to how the mechanical properties of the tissue change during its preconditioning.

Neuronal hyperexcitability in the dorsal horn after painful facet joint injury

Excessive cervical facet capsular ligament stretch has been implicated as a cause of whiplash-associated disorders following rear-end impacts, but the pathophysiological mechanisms that produce chronic pain in these cases remain unclear. Using a rat model of C6–C7 cervical facet joint capsule stretch that produces sustained mechanical hyperalgesia, the presence of neuronal hyperexcitability was characterized 7days after joint loading. Extracellular recordings of spinal dorsal horn neuronal activity between C6 and C8 (117 neurons) were obtained from anesthetized rats, with both painful and non-painful behavioral outcomes established by the magnitude of capsule stretch. The frequency of neuronal firing during noxious pinch (p<0.0182) and von Frey filaments applications (4–26g) to the forepaw was increased (p<0.0156) in the painful group compared to the non-painful and sham groups. In addition, the incidence and frequency of spontaneous and after discharge firing were greater in the painful group (p<0.0307) relative to sham. The proportion of cells in the deep laminae that responded as wide dynamic range neurons also was increased in the painful group relative to non-painful or sham groups (p<0.0348). These findings suggest that excessive facet capsule stretch, while not producing visible tearing, can produce functional plasticity of dorsal horn neuronal activity. The increase in neuronal firing across a range of stimulus magnitudes observed at day 7 post-injury provides the first direct evidence of neuronal modulation in the spinal cord following facet joint loading, and suggests that facet-mediated chronic pain following whiplash injury is driven, at least in part, by central sensitization.

Full field strain measurements of collagenous tissue by tracking fiber alignment through vector correlation

Full field strain measurements of biological tissue during loading are often limited to the quantification of fiduciary marker displacements on the tissue surface. These marker measurements can lack the necessary spatial resolution to characterize non-uniform deformation and may not represent the deformation of the load-bearing collagen microstructure. To overcome these potential limitations, a method was developed to track the deformation of the collagen fiber microstructure in ligament tissue. Using quantitative polarized light imaging, fiber alignment maps incorporating both direction and alignment strength at each pixel were generated during facet capsular ligament loading. A grid of virtual markers was superimposed over the tissue in the alignment maps, and the maximization of a vector correlation calculation between fiber alignment maps was used to track marker displacement. Tracking error was quantified through comparisons to the displacements of excised ligament tissue ( n=3); separate studies applied uniaxial tension to isolated facet capsular ligament tissue ( n=4) to evaluate tracking capabilities during large tissue deformations. The average difference between virtual marker and tissue displacements was 0.07±0.06 pixels. This error in marker location produced principal strain measurements of 1.2±1.6% when markers were spaced 4 pixels apart. During tensile tissue loading, substantial inhomogeneity was detected in the strain field using vector correlation tracking, and the location of maximum strain differed from that produced by standard tracking techniques using coarser meshes. These findings provide a method to directly measure fiber network strains using quantitative fiber alignment data, enabling a better understanding of structure–function relationships in tissues at different length scales.

Anomalous fiber realignment during tensile loading of the rat facet capsular ligament identifies mechanically induced damage and physiological dysfunction

Many pathophysiological phenomena are associated with soft tissue loading that does not produce visible damage or tissue failure. As such, there is an unexplained disconnect between tissue injury and detectable structural damage during loading. This study investigated the collagen fiber kinematics of the rat facet capsular ligament to identify the onset of subfailure damage during tensile loading conditions that are known to induce pain. Quantitative polarized light imaging was used to determine the collagen fiber orientation in the capsular ligament ( n=7) under tension, and an alignment vector correlation measurement was employed to identify local anomalous fiber realignment during loading. During the initial portion of loading when tissue stiffness was increasing, anomalous realignment was more likely to be detected than mechanical evidence of structural damage, and as a result, anomalous fiber realignment was identified significantly ( p=0.004) before gross failure. The occurrence of anomalous fiber realignment was significantly associated ( p=0.013) with a decrease in tangent stiffness during loading (ligament yield), suggesting this optical metric may be associated with a loss of structural integrity. The presence of localized anomalous realignment during subfailure loading in this tissue may explain the development of laxity, collagen fiber disorganization, and persistent pain previously reported for facet joint distractions comparable to that required for anomalous realignment. These optical data, together with the literature, suggest that mechanically induced tissue damage may occur in the absence of any macroscopic or mechanical evidence of failure and may produce local pathology and pain.

Vector correlation technique for pixel-wise detection of collagen fiber realignment during injurious tensile loading

Excessive soft tissue loading can produce adverse structural and physiological changes in the absence of any visible tissue rupture. However, image-based analysis techniques to assess microstructural changes during loading without any visible rupture remain undeveloped. Quantitative polarized light imaging (QPLI) can generate spatial maps of collagen fiber alignment during loading with high temporal resolution and can provide a useful technique to measure microstructural responses. While collagen fibers normally realign in the direction that tissue is loaded, rapid, atypical fiber realignment during loading may be associated with the response of a local collagenous network to fiber failure. A vector correlation technique was developed to detect this atypical fiber realignment using QPLI and mechanical data collected from human facet capsular ligaments (n=16) loaded until visible rupture. Initial detection of anomalous realignment coincided with a measurable decrease in the tissue stiffness in every specimen and occurred at significantly lower strains than those at visible rupture (p<0.004), suggesting this technique may be sensitive to a loss of microstructural integrity. The spatial location of anomalous realignment was significantly associated with regions where visible rupture developed (p<0.001). This analysis technique provides a foundation to identify regional differences in soft tissue injury tolerances and relevant mechanical thresholds.

Capsular Ligament Involvement in the Development of Mechanical Hyperalgesia after Facet Joint Loading: Behavioral and Inflammatory Outcomes in a Rodent Model of Pain

Whiplash injury can produce pain in the neck, arm, and hand, and has been associated with inflammation. However, the relationship between inflammatory responses and pain symptoms remains unknown, hindering the development of appropriate therapeutics for whiplash symptoms. Two joint loading paradigms were used separately in an established rat model of painful cervical facet joint distraction to apply: (1) gross failure, and (2) subfailure distraction of the facet capsular ligament. Behavioral outcomes were compared to determine whether more severe mechanical loading produces greater pain by measuring mechanical hyperalgesia in the shoulder and forepaws. Inflammatory mediators (glia and cytokines) were quantified in the spinal cord and dorsal root ganglion (DRG) after injury. Subfailure loading produced sustained hyperalgesia in the shoulder and forepaw that was significantly greater (p < 0.042) than sham, while an induced capsule failure produced only transient, yet significant (p < 0.021), mechanical hyperalgesia. The absence of hyperalgesia after ligament failure suggests this type of injury may interrupt nociceptive input from the capsule, which is likely necessary to produce sustained pain symptoms. Glial mRNA was significantly increased (p < 0.043) in the spinal cord after ligament failure, but remained unchanged in the DRG. Cytokine mRNA levels in the spinal cord and DRG were also significantly elevated after facet ligament failure, but not after painful subfailure loading. Findings suggest that different joint loading scenarios produced varied inflammatory responses in the CNS. These data support existing clinical reports suggesting that therapeutic interventions directed at the facet capsule may be effective in treating this painful injury.

Altered collagen fiber kinematics define the onset of localized ligament damage during loading

Detecting the initiation of mechanical injury to biological tissue, and not just its ultimate failure, is critical to a sensitive and specific characterization of tissue tolerance, development of quantitative relationships between macro- and microstructural tissue responses, and appropriate interpretation of physiological responses to loading. We have developed a novel methodological approach to detect the onset and spatial location of structural damage in collagenous soft tissue, before its visible rupture, via identification of atypical regional collagen fiber kinematics during loading. Our methods utilize high-speed quantitative polarized light imaging to identify the onset of tissue damage in ligament regions where mean collagen fiber rotation significantly deviates from its behavior during noninjurious loading. This technique was validated by its ability to predict the location of visible rupture (P = 0.0009). This fiber rotation-based metric of damage identifies potential facet capsular ligament injury beginning well before rupture, at 51 +/- 12% of the displacement required to produce tissue failure. Although traditional macroscale strain metrics fail to identify the location of microstructural damage, initial injury detection determined by altered fiber rotation was significantly correlated (R = 0.757, P = 0.049) with tissue yield (defined by a decrease in stiffness), supporting the capabilities of this method. Damaged regions exhibited higher variance in fiber direction than undamaged regions (P = 0.0412).

Head-Turned Postures Increase the Risk of Cervical Facet Capsule Injury During Whiplash

In vitro experiments using cadaveric cervical spine motion segments to quantify facet capsular ligament strain during whiplash-like loading. To quantify facet capsule strains during whiplash-like loading with an axial intervertebral prerotation simulating an initial head-turned posture and to then compare these strains to previously-published strains for partial failure and gross failure of the facet capsule for these specimens. Clinical data have shown that a head-turned posture at impact increases the severity and duration of whiplash-related symptoms. Thirteen motion segments were used from 7 women donors (50 +/- 10 years). Axial pretorques (+/-1.5 Nm), axial compressive preloads (45, 197, and 325 N), and quasi-static shear loads (posteriorly-directed horizontal forces from 0 to 135 N) were applied to the superior vertebral body to simulate whiplash kinematics with the head turned. Three-dimensional displacements of markers placed on the right facet capsular ligament were used to estimate the strain field in the ligament during loading. The effects of pretorque direction, compression, and posterior shear on motion segment motion and maximum principal strain in the capsule were examined using repeated-measures analyses of variance. Axial pretorque affected peak capsule strains more than axial compression or posterior shear. Peak strains reached 34% +/- 18% and were higher for pretorques toward rather than away from the facet capsule (i.e.-, head rotation to the right caused higher strain in the right facet capsule). Compared to previously-reported data for these specimens, peak capsule strains with a pretorque were double those without a pretorque (17% +/- 6%) and not significantly different from those at partial failure of the ligament (35% +/- 21%). Thus a head-turned posture increases facet capsular ligament strain compared to a neutral head posture-a finding consistent with the greater symptom severity and duration observed in whiplash patients who have their head turned at impact.

Are cervical multifidus muscles active during whiplash and startle? An initial experimental study

BackgroundThe cervical multifidus muscles insert onto the lower cervical facet capsular ligaments and the cervical facet joints are the source of pain in some chronic whiplash patients. Reflex activation of the multifidus muscle during a whiplash exposure could potentially contribute to injuring the facet capsular ligament. Our goal was to determine the onset latency and activation amplitude of the cervical multifidus muscles to a simulated rear-end collision and a loud acoustic stimuli.MethodsWire electromyographic (EMG) electrodes were inserted unilaterally into the cervical multifidus muscles of 9 subjects (6M, 3F) at the C4 and C6 levels. Seated subjects were then exposed to a forward acceleration (peak acceleration 1.55 g, speed change 1.8 km/h) and a loud acoustic tone (124 dB, 40 ms, 1 kHz).ResultsAside from one female, all subjects exhibited multifidus activity after both stimuli (8 subjects at C4, 6 subjects at C6). Neither onset latencies nor EMG amplitude varied with stimulus type or spine level (p > 0.13). Onset latencies and amplitudes varied widely, with EMG activity appearing within 160 ms of stimulus onset (for at least one of the two stimuli) in 7 subjects.ConclusionThese data indicate that the multifidus muscles of some individuals are active early enough to potentially increase the collision-induced loading of the facet capsular ligaments.

An Intact Facet Capsular Ligament Modulates Behavioral Sensitivity and Spinal Glial Activation Produced by Cervical Facet Joint Tension

In vivo experiments using a rat model of painful facet joint distraction. To determine whether tension of the facet capsular ligament is requisite for producing pain for joint loading and to define effects on spinal glial activation. Cervical facet joint loading may initiate pain for certain conditions. While facet capsule tension has been proposed as requisite for pain, this hypothesis has not been tested. Using an established rat model of painful C6-C7 distraction, tension was applied after transection of the left facet capsule; the right capsule remained intact. Each rat (n = 8) received the same distraction simultaneously applied across both the intact and cut capsules. Sham procedures were performed on separate rats (n = 4) with no joint distraction. Bilateral forepaw mechanical allodynia was measured as a pain outcome. Cervical spinal cord tissue (C7) was harvested on day 7 to detect glial reactivity using immunohistochemistry. Distraction mechanics were consistent with conditions eliciting persistent behavioral hypersensitivity. Allodynia was produced for an intact capsule and was significantly elevated over both the cut capsule (P < 0.004) and sham (P < 0.002). Transecting the capsule before distraction did not produce elevated allodynia, except on day 7. Spinal astrocytic reactivity paralleled allodynia; glial fibrillary acidic protein expression for an intact capsule was significantly greater than the cut and sham responses (P < 0.04), with no difference observed between the cut and sham spinal astrocytic reactivity. Spinal microglial activation did not differ between groups. Results suggest ligament tension may be required to produce pain from facet joint loading. Further studies of other cellular responses are needed to define the mechanisms of painful facet joint injury.

Cervical facet capsular ligament yield defines the threshold for injury and persistent joint-mediated neck pain

The cervical facet joint has been identified as a source of neck pain, and its capsular ligament is a likely candidate for injury during whiplash. Many studies have shown that the mechanical properties of ligaments can be altered by subfailure injury. However, the subfailure mechanical response of the facet capsular ligament has not been well defined, particularly in the context of physiology and pain. Therefore, the goal of this study was to quantify the structural mechanics of the cervical facet capsule and define the threshold for altered structural responses in this ligament during distraction. Tensile failure tests were preformed using isolated C6/C7 rat facet capsular ligaments ( n=8); gross ligament failure, the occurrence of minor ruptures and ligament yield were measured. Gross failure occurred at 2.45±0.60 N and 0.92±0.17 mm. However, the yield point occurred at 1.68±0.56 N and 0.57±0.08 mm, which was significantly less than gross failure ( p<0.001 for both measurements). Maximum principal strain in the capsule at yield was 80±24%. Energy to yield was 14.3±3.4% of the total energy for a complete tear of the ligament. Ligament yield point occurred at a distraction magnitude in which pain symptoms begin to appear in vivo in the rat. These mechanical findings provide insight into the relationship between gross structural failure and painful loading for the facet capsular ligament, which has not been previously defined for such neck injuries. Findings also present a framework for more in-depth methods to define the threshold for persistent pain and could enable extrapolation to the human response.

Biomechanical Analysis of Rotational Motions After Disc Arthroplasty

An anatomic and biomechanical bench-top basic scientific comparative analysis to determine the appropriateness of total disc replacement (TDR) in a lumbar spine with scoliotic tendencies. Only limited data are currently available studying the application of disc replacement adjacent to scoliosis fusions. Theoretically, motion preservation should help delay the continuum of lumbar degeneration adjacent to scoliosis fusions and rotationally unstable lumbar segments. As a tertiary referral center for failed TDR, we noticed an alarming number of lumbar spinal rotational iatrogenic instability patterns but none occurring in the cervical spine. It is appropriate to analyze the bench-top rotational stability of disc replacement to predict whether this new technology is feasible for a larger prospective clinical study in the treatment of degenerative scoliosis. Measurements were taken from 60 human specimens from the Hamann-Todd Osteological Collection: 1) to determine the rotational arc of influence (AOI) = the angle formed from the center of axial rotation to the outermost extent of the facet joints; and 2) to determine the relative anatomic size discrepancy between the left and right facets proportionately with the cross-sectional area of the intervertebral disc = facet/endplate ratio (FER). Biomechanical testing was performed using fresh frozen human cadaveric spines with the following conditions to determine the rotational stability: 1) intact; 2) resection of ALL, anulus, disc, and PLL simulating the preparation for a TDR; 3) a more radical anular resection; 4) entire 360 degrees anular resection; and 4) insertion of the respective unconstrained-type disc replacement. Using a 6 degrees of freedom spine simulator, unconstrained pure moments of +/-8.0 Nm (lumbar) and +/-3.0 Nm (cervical) were used for axial rotation with quantification of the operative level range of motion and neutral zone, with data normalized to the intact spine condition. There were anatomic limitations in the lumbar spine that make it less desirable to apply uncon-strained disc replacements; indeed, the spine was at risk for iatrogenic lumbar scoliosis. The anulus fibrosis, anterior longitudinal ligament, and the posterior longitudinal ligament are critical structures in preventing iatrogenic scoliosis. The lumbar facet joints are more posteriorly located and are smaller relative to the intervertebral disc, compared with this association in the cervical spine. Because the facet capsular ligaments are mechanically less effective with lower tensile strength in the lumbar spine, multiple-level arthroplasty tends to accentuate scoliotic tendencies; this is independent of prosthetic design and surgical technique. Implantation of the lumbar TDR never restored the motion segment back to the rotational stability of the intact segment achieving a range of 120% to 140% rotational range of motion compared with the intact condition. This rotational instability proved to be additive as a two-level lumbar TDR resulted in between 240% and 260% increase in rotational instability compared with the intact condition. The neutral zone of the intact cervical spine was restored even using an unconstrained cervical TDR. The greater inherent rotational constraints of the cervical spine make it more amenable to stable multilevel arthroplasty compared with the lumbar spine.