Fabrication Of Tissue-engineered Vascular Grafts Research Articles

Hydrostatic pressure under hypoxia facilitates fabrication of tissue-engineered vascular grafts derived from human vascular smooth muscle cells in vitro.

Biologically compatible vascular grafts are urgently required. The scaffoldless multi-layered vascular wall is considered to offer theoretical advantages, such as facilitating cells to form cell-cell and cell-matrix junctions and natural extracellular matrix networks. Simple methods are desired for fabricating physiological scaffoldless tissue-engineered vascular grafts. Here, we showed that periodic hydrostatic pressurization under hypoxia (HP/HYP) facilitated the fabrication of multi-layered tunica media entirely from human vascular smooth muscle cells. Compared with normoxic atmospheric pressure, HP/HYP increased expression of N-myc downstream-regulated 1 (NDRG1) and the collagen-cross-linking enzyme lysyl oxidase in human umbilical artery smooth muscle cells. HP/HYP increased N-cadherin-mediated cell-cell adhesion via NDRG1, cell-matrix interaction (i.e., clustering of integrin α5β1 and fibronectin), and collagen fibrils. We then fabricated vascular grafts using HP/HYP during repeated cell seeding and obtained 10-layered smooth muscle grafts with tensile rupture strength of 0.218 to 0.396 MPa within 5 weeks. Implanted grafts into the rat aorta were endothelialized after 1 week and patent after 5 months, at which time most implanted cells had been replaced by recipient-derived cells. These results suggest that HP/HYP enables fabrication of scaffoldless human vascular mimetics that have a spatial arrangement of cells and matrices, providing potential clinical applications for cardiovascular diseases. STATEMENT OF SIGNIFICANCE: : Tissue-engineered vascular grafts (TEVGs) are theoretically more biocompatible than prosthetic materials in terms of mechanical properties and recipient cell-mediated tissue reconstruction. Although some promising results have been shown, TEVG fabrication processes are complex, and the ideal method is still desired. We focused on the environment in which the vessels develop in utero and found that mechanical loading combined with hypoxia facilitated formation of cell-cell and cell-matrix junctions and natural extracellular matrix networks in vitro, which resulted in the fabrication of multi-layered tunica media entirely from human umbilical artery smooth muscle cells. These scaffoldless TEVGs, produced using a simple process, were implantable and have potential clinical applications for cardiovascular diseases.

Use of Electrospun Phenylalanine/Poly-ε-Caprolactone Chiral Hybrid Scaffolds to Promote Endothelial Remodeling.

The fabrication of tissue-engineered vascular grafts to replace damaged vessels is a promising therapy for cardiovascular diseases. Endothelial remodeling in the lumen of TEVGs is critical for successful revascularization. However, the construction of well-functioning TEVGs remains a fundamental challenge. Herein, chiral hybrid scaffolds were prepared by electrospinning using D/L-phenylalanine based gelators [D(L)PHEG] and poly-ε-caprolactone (PCL). The chirality of scaffolds significantly affected the endothelial remodeling progress of TEVGs. Compared with L-phenylalanine based gelators/poly-ε-caprolactone (L/PCL) and PCL, D-phenylalanine based gelators/poly-ε-caprolactone (D/PCL) scaffolds enhanced cell adhesion, and proliferation and upregulated the expression of fibronectin-1, and vinculin. These results suggests that chiral hybrid scaffolds can promote endothelial remodeling of TEVGs by upregulating adhesion-associated protein levels. This study offers an innovative strategy for endothelial remodeling of TEVGs by fabricating chiral hybrid scaffolds, and provides new insight for the treatment of cardiovascular diseases.

Fabrication of Tissue-Engineered Vascular Grafts using Low Sustained Intraluminal Pressure to Sod Human Adipose-Derived Stromal Vascular Fraction Cells onto ePTFE

Fabrication of Tissue-Engineered Vascular Grafts using Low Sustained Intraluminal Pressure to Sod Human Adipose-Derived Stromal Vascular Fraction Cells onto ePTFE

Fabrication of tubular tissue constructs by centrifugal casting of cells suspended in an in situ crosslinkable hyaluronan‐gelatin hydrogel

Achieving the optimal cell density and desired cell distribution in scaffolds is a major goal of cell seeding technologies in tissue engineering. In order to reach this goal, a novel centrifugal casting technology was developed using in situ crosslinkable hyaluronan-based (HA) synthetic extracellular matrix (sECM). Living cells were suspended in a viscous solution of thiol-modified HA and thiol-modified gelatin, a polyethyleneglycol diacrylate crosslinker was added, and a hydrogel was formed during rotation. The tubular tissue constructs consisting of a densely packed cell layer were fabricated with the rotation device operating at 2000 rpm for 10 min. The majority of cells suspended in the HA mixture before rotation were located inside the layer after centrifugal casting. Cells survived the effect of the centrifugal forces experienced under the rotational regime employed. The volume cell density (65.6%) approached the maximal possible volume density based on theoretical sphere packing models. Thus, centrifugal casting allows the fabrication of tubular constructs with the desired redistribution, composition and thickness of cell layers that makes the maximum efficient use of available cells. Centrifugal casting in this sECM would enable rapid fabrication of tissue-engineered vascular grafts, as well as other tubular and planar tissue-engineered constructs.

Fabrication of tubular tissue constructs by centrifugal casting of cells suspended in an in situ crosslinkable hyaluronan-gelatin hydrogel

Achieving the optimal cell density and desired cell distribution in scaffolds is a major goal of cell seeding technologies in tissue engineering. In order to reach this goal, a novel centrifugal casting technology was developed using in situ crosslinkable hyaluronan-based (HA) synthetic extracellular matrix (sECM). Living cells were suspended in a viscous solution of thiol-modified HA and thiol-modified gelatin, a polyethyleneglycol diacrylate crosslinker was added, and a hydrogel was formed during rotation. The tubular tissue constructs consisting of a densely packed cell layer were fabricated with the rotation device operating at 2000 rpm for 10 min. The majority of cells suspended in the HA mixture before rotation were located inside the layer after centrifugal casting. Cells survived the effect of the centrifugal forces experienced under the rotational regime employed. The volume cell density (65.6%) approached the maximal possible volume density based on theoretical sphere packing models. Thus, centrifugal casting allows the fabrication of tubular constructs with the desired redistribution, composition and thickness of cell layers that makes the maximum efficient use of available cells. Centrifugal casting in this sECM would enable rapid fabrication of tissue-engineered vascular grafts, as well as other tubular and planar tissue-engineered constructs.