Barbed End Of F-actin Research Articles

Mechanism of actin filament severing and capping by gelsolin.

Gelsolin is the prototypical member of a family of Ca2+-activated F-actin severing and capping proteins. Here we report structures of Ca2+-bound human gelsolin at the barbed end of F-actin. One structure reveals gelsolin's six domains (G1G6) and interdomain linkers wrapping around F-actin, while another shows domains G1G3-a fragment observed during apoptosis-binding on both sides of F-actin. Conformational changes that trigger severing occur on one side of F-actin with G1G6 and on both sides with G1G3. Gelsolin remains bound after severing, blocking subunit exchange.

Mechanisms of actin filament severing and elongation by formins.

Humans express 15 formins that play crucial roles in actin-based processes, including cytokinesis, cell motility and mechanotransduction1,2. However, the lack of structures bound to the actin filament (F-actin) has been a major impediment to understanding formin function. Whereas formins are known for their ability to nucleate and elongate F-actin3-7, some formins can additionally depolymerize, sever or bundle F-actin. Two mammalian formins, inverted formin 2 (INF2) and diaphanous 1 (DIA1, encoded by DIAPH1), exemplify this diversity. INF2 shows potent severing activity but elongates weakly8-11 whereas DIA1 has potent elongation activity but does not sever4,8. Using cryo-electron microscopy (cryo-EM)we show five structural states of INF2 and two of DIA1 bound to the middle and barbed end of F-actin. INF2 and DIA1 bind differently to these sites, consistent with their distinct activities. The formin-homology 2 and Wiskott-Aldrich syndrome protein-homology 2 (FH2 andWH2, respectively) domains of INF2 are positioned to sever F-actin, whereas DIA1 appears unsuited for severing. These structures also show how profilin-actin is delivered to the fast-growing barbed end, and how this is followed by a transition of the incoming monomer into the F-actin conformation and the release of profilin. Combined, the seven structures presented here provide step-by-step visualization of the mechanisms of F-actin severing and elongation by formins.

Molecular mechanism of actin filament elongation by formins.

Formins control the assembly of actin filaments (F-actin) that drive cell morphogenesis and motility in eukaryotes. However, their molecular interaction with F-actin and their mechanism of action remain unclear. In this work, we present high-resolution cryo-electron microscopy structures of F-actin barbed ends bound by three distinct formins, revealing a common asymmetric formin conformation imposed by the filament. Formation of new intersubunit contacts during actin polymerization sterically displaces formin and triggers its translocation. This "undock-and-lock" mechanism explains how actin-filament growth is coordinated with formin movement. Filament elongation speeds are controlled by the positioning and stability of actin-formin interfaces, which distinguish fast and slow formins. Furthermore, we provide a structure of the actin-formin-profilin ring complex, which resolves how profilin is rapidly released from the barbed end during filament elongation.

Functional and structural insights into the multi-step activation and catalytic mechanism of bacterial ExoY nucleotidyl cyclase toxins bound to actin-profilin.

ExoY virulence factors are members of a family of bacterial nucleotidyl cyclases (NCs) that are activated by specific eukaryotic cofactors and overproduce cyclic purine and pyrimidine nucleotides in host cells. ExoYs act as actin-activated NC toxins. Here, we explore the Vibrio nigripulchritudo Multifunctional-Autoprocessing Repeats-in-ToXin (MARTX) ExoY effector domain (Vn-ExoY) as a model for ExoY-type members that interact with monomeric (G-actin) instead of filamentous (F-actin) actin. Vn-ExoY exhibits moderate binding affinity to free or profilin-bound G-actin but can capture the G-actin:profilin complex, preventing its spontaneous or VASP- or formin-mediated assembly at F-actin barbed ends in vitro. This mechanism may prolong the activated cofactor-bound state of Vn-ExoY at sites of active actin cytoskeleton remodelling. We present a series of high-resolution crystal structures of nucleotide-free, 3'-deoxy-ATP- or 3'-deoxy-CTP-bound Vn-ExoY, activated by free or profilin-bound G-actin-ATP/-ADP, revealing that the cofactor only partially stabilises the nucleotide-binding pocket (NBP) of NC toxins. Substrate binding induces a large, previously-unidentified, closure of their NBP, confining catalytically important residues and metal cofactors around the substrate, and facilitating the recruitment of two metal ions to tightly coordinate the triphosphate moiety of purine or pyrimidine nucleotide substrates. We validate critical residues for both the purinyl and pyrimidinyl cyclase activity of NC toxins in Vn-ExoY and its distantly-related ExoY from Pseudomonas aeruginosa, which specifically interacts with F-actin. The data conclusively demonstrate that NC toxins employ a similar two-metal-ion mechanism for catalysing the cyclisation of nucleotides of different sizes. These structural insights into the dynamics of the actin-binding interface of actin-activated ExoYs and the multi-step activation of all NC toxins offer new perspectives for the specific inhibition of class II bacterial NC enzymes.

Hypoxia induces actin cytoskeleton remodeling by regulating the binding of CAPZA1 to F-actin via PIP2 to drive EMT in hepatocellular carcinoma

Studies have shown that hypoxia can induce cytoskeletal injury and remodeling through the activation of the RhoA/ROCK signaling pathway by hypoxia-inducible factor-1α (HIF-1α). Our previous study confirmed that CAPZA1 can modulate EMT by regulating actin cytoskeleton remodeling. However, the relationship between HIF-1α and CAPZA1 has not been illustrated. Therefore, this study aimed to investigate the mechanism by which hypoxia induces the remodeling of the actin cytoskeleton by regulating CAPZA1 in hepatocellular carcinoma (HCC) cells. In the present study, we showed that the low expression of CAPZA1 promotes HCC cell invasion and migration in vitro and in vivo by regulating actin cytoskeleton remodeling to drive EMT. Furthermore, we found that the combination of PIP2 and CAPZA1 enables CAPZA1 to be released from the barbed end of F-actin, which in turn drives the remodeling of the actin cytoskeleton. Finally, we confirmed that hypoxia increases PIP2 levels and its binding to CAPZA1 in HCC cells via the HIF-1α/RhoA/ROCK1 pathway. Thus, CAPZA1 and PIP2 could be therapeutic targets to inhibit the invasion and migration promoted by hypoxia in HCC cells.

Dynamic Actin Networks Utilized to Support Simultaneous Processive Motility of Two Different Myosin Motor Classes

In an eukaryotic cell multiple myosin motor families coexist and use the same actin cytoskeleton as tracks for processive motility and transport of cargoes. It is unclear how these motors interact while sharing the same F-actin and whether there are exclusion mechanisms that prioritize function of one myosin class over the other. To assess the influence that different myosin classes have on each other, we developed an assay that combines two dynamic systems: elongating actin filaments with distinguished barbed and pointed ends, and myosins moving along these filaments.In this study two different myosins motors were used: myosin-5 and myosin-6. These two motors have distinct functions in the cell and are known to travel in opposite directions along actin filaments. Myosin-5 walks towards the barbed end of F-actin towards dynamically rearranging actin in the cell periphery. Myosin-6, which is used in endocytic traffic, is a pointed-end motor that walks towards the cell center. We successfully reconstituted simultaneous bidirectional motility of myosin-5 and myosin-6 on single polymerizing filaments of actin. Speed, run lengths, and effective landing rates of the motors in this ‘two motor assay’ were compared to ‘single motor assays’ featuring motility of myosin-5 or myosin-6 exclusively. We also report the frequency and outcomes of collision events between motors walking in opposite directions along single actin filament.

Regulation of Myosin VI Studied by Electron Microscopy

Myosins are ATPase motor proteins that are activated by and traffic along actin filaments. This large protein family is divided into many classes with different functional properties and specializations for various roles, including membrane anchorage, longer range transport of cargo vesicles or cell signaling.Myosin class VI is unique due to its reversed directionality along actin filaments, moving towards the pointed end, in contrast to almost all other classes, which move towards the barbed end of F-actin. Whilst the directionality is well studied, other characteristics such as activation, cargo and lipid binding or dimerization are not fully understood. Using size exclusion chromatography, titration studies and gliding filament assays we investigated myosin VI backfolding, cargo binding and mechanical activity.Furthermore, we applied electron microscopy and single particle image processing to determine the structural properties of myosin VI in different ionic and nucleotide conditions. Two dimensional class averages based on various alignment and classification methods were made that allow for a detailed structural analysis including a comparison with crystal structures.

Drebrin-induced Stabilization of Actin Filaments

Drebrin is a mammalian neuronal protein that binds to and organizes filamentous actin (F-actin) in dendritic spines, the receptive regions of most excitatory synapses that play a crucial role in higher brain functions. Here, the structural effects of drebrin on F-actin were examined in solution. Depolymerization and differential scanning calorimetry assays show that F-actin is stabilized by the binding of drebrin. Drebrin inhibits depolymerization mainly at the barbed end of F-actin. Full-length drebrin and its C-terminal truncated constructs were used to clarify the domain requirements for these effects. The actin binding domain of drebrin decreases the intrastrand disulfide cross-linking of Cys-41 (in the DNase I binding loop) to Cys-374 (C-terminal) but increases the interstrand disulfide cross-linking of Cys-265 (hydrophobic loop) to Cys-374 in the yeast mutants Q41C and S265C, respectively. We also demonstrate, using solution biochemistry methods and EM, the rescue of filament formation by drebrin in different cases of longitudinal interprotomer contact perturbation: the T203C/C374S yeast actin mutant and grimelysin-cleaved skeletal actin (between Gly-42 and Val-43). Additionally, we show that drebrin rescues the polymerization of V266G/L267G, a hydrophobic loop yeast actin mutant with an impaired lateral interface formation between the two filament strands. Overall, our data suggest that drebrin stabilizes actin filaments through its effect on their interstrand and intrastrand contacts.

Repulsive axon guidance cues ephrin‐A2 and slit3 stop protrusion of the growth cone leading margin concurrently with inhibition of ADF/cofilin and ERM proteins

Axonal growth cones turn away from repulsive guidance cues. This may start with reduced protrusive motility in the region the growth cone leading margin that is closer to the source of repulsive cue. Using explants of E7 chick temporal retina, we examine the effects of two repulsive guidance cues, ephrin-A2 and slit3, on retinal ganglion cell growth cone protrusive activity, total F-actin, free F-actin barbed ends, and the activities (phosphorylation states) of actin regulatory proteins, ADF/cofilin and ezrin, radixin, moesin (ERM) proteins. Ephrin-A2 rapidly stops protrusive activity simultaneously with reducing F-actin, free barbed ends and the activities of ADF/cofilin and ERM proteins. Slit3 also stops protrusion and reduces the activities of ADF/cofilin and ERM proteins. We interpret these results as indicating that repulsive guidance cues inhibit actin polymerization and actin-membrane linkage to stop protrusive activity. Retrograde F-actin flow withdraws actin to the C-domain, where F-actin bundles interact with myosin II to generate contractile forces that can collapse and retract the growth cone. Our results suggest that common mechanisms are used by repulsive guidance cue to disable growth cone motility and remodel growing axon terminals.

Activation of Ezrin/Radixin/Moesin Mediates Attractive Growth Cone Guidance through Regulation of Growth Cone Actin and Adhesion Receptors

The development of a functioning neural network relies on responses of axonal growth cones to molecular guidance cues that are encountered en route to their target tissue. Nerve growth factor (NGF) and neurotrophin-3 serve as attractive cues for chick embryo sensory growth cones in vitro and in vivo, but little is known about the actin-binding proteins necessary to mediate this response. The evolutionarily conserved ezrin/radixin/moesin (ERM) family of proteins can tether actin filaments to the cell membrane when phosphorylated at a conserved threonine residue. Here we show that acute neurotrophin stimulation rapidly increases active phospho-ERM levels in chick sensory neuron growth cone filopodia, coincident with an increase in filopodial L1 and β-integrin. Disrupting ERM function with a dominant-negative construct (DN-ERM) results in smaller and less motile growth cones with disorganized actin filaments. Previously, we found that NGF treatment increases actin-depolymerizing factor (ADF)/cofilin activity and growth cone F-actin (Marsick et al., 2010). Here, we show this F-actin increase, as well as attractive turning to NGF, is blocked when ERM function is disrupted despite normal activation of ADF/cofilin. We further show that DN-ERM expression disrupts leading edge localization of active ADF/cofilin and free F-actin barbed ends. Moreover, filopodial phospho-ERM levels are increased by incorporation of active ADF/cofilin and reduced by knockdown of L1CAM.Together, these data suggest that ERM proteins organize actin filaments in sensory neuron growth cones and are crucial for neurotrophin-induced remodeling of F-actin and redistribution of adhesion receptors.

Labeling F-actin Barbed Ends with Rhodamine-actin in Permeabilized Neuronal Growth Cones

The motile tips of growing axons are called growth cones. Growth cones lead navigating axons through developing tissues by interacting with locally expressed molecular guidance cues that bind growth cone receptors and regulate the dynamics and organization of the growth cone cytoskeleton3-6. The main target of these navigational signals is the actin filament meshwork that fills the growth cone periphery and that drives growth cone motility through continual actin polymerization and dynamic remodeling7. Positive or attractive guidance cues induce growth cone turning by stimulating actin filament (F-actin) polymerization in the region of the growth cone periphery that is nearer the source of the attractant cue. This actin polymerization drives local growth cone protrusion, adhesion of the leading margin and axonal elongation toward the attractant. Actin filament polymerization depends on the availability of sufficient actin monomer and on polymerization nuclei or actin filament barbed ends for the addition of monomer. Actin monomer is abundantly available in chick retinal and dorsal root ganglion (DRG) growth cones. Consequently, polymerization increases rapidly when free F-actin barbed ends become available for monomer addition. This occurs in chick DRG and retinal growth cones via the local activation of the F-actin severing protein actin depolymerizing factor (ADF/cofilin) in the growth cone region closer to an attractant8-10. This heightened ADF/cofilin activity severs actin filaments to create new F-actin barbed ends for polymerization. The following method demonstrates this mechanism. Total content of F-actin is visualized by staining with fluorescent phalloidin. F-actin barbed ends are visualized by the incorporation of rhodamine-actin within growth cones that are permeabilized with the procedure described in the following, which is adapted from previous studies of other motile cells11, 12. When rhodamine-actin is added at a concentration above the critical concentration for actin monomer addition to barbed ends, rhodamine-actin assembles onto free barbed ends. If the attractive cue is presented in a gradient, such as being released from a micropipette positioned to one side of a growth cone, the incorporation of rhodamine-actin onto F-actin barbed ends will be greater in the growth cone side toward the micropipette10. Growth cones are small and delicate cell structures. The procedures of permeabilization, rhodamine-actin incorporation, fixation and fluorescence visualization are all carefully done and can be conducted on the stage of an inverted microscope. These methods can be applied to studying local actin polymerization in migrating neurons, other primary tissue cells or cell lines.

Labeling F-actin Barbed Ends with Rhodamine-actin in Permeabilized Neuronal Growth Cones

The motile tips of growing axons are called growth cones. Growth cones lead navigating axons through developing tissues by interacting with locally expressed molecular guidance cues that bind growth cone receptors and regulate the dynamics and organization of the growth cone cytoskeleton. The main target of these navigational signals is the actin filament meshwork that fills the growth cone periphery and that drives growth cone motility through continual actin polymerization and dynamic remodeling. Positive or attractive guidance cues induce growth cone turning by stimulating actin filament (F-actin) polymerization in the region of the growth cone periphery that is nearer the source of the attractant cue. This actin polymerization drives local growth cone protrusion, adhesion of the leading margin and axonal elongation toward the attractant. Actin filament polymerization depends on the availability of sufficient actin monomer and on polymerization nuclei or actin filament barbed ends for the addition of monomer. Actin monomer is abundantly available in chick retinal and dorsal root ganglion (DRG) growth cones. Consequently, polymerization increases rapidly when free F-actin barbed ends become available for monomer addition. This occurs in chick DRG and retinal growth cones via the local activation of the F-actin severing protein actin depolymerizing factor (ADF/cofilin) in the growth cone region closer to an attractant. This heightened ADF/cofilin activity severs actin filaments to create new F-actin barbed ends for polymerization. The following method demonstrates this mechanism. Total content of F-actin is visualized by staining with fluorescent phalloidin. F-actin barbed ends are visualized by the incorporation of rhodamine-actin within growth cones that are permeabilized with the procedure described in the following, which is adapted from previous studies of other motile cells. When rhodamine-actin is added at a concentration above the critical concentration for actin monomer addition to barbed ends, rhodamine-actin assembles onto free barbed ends. If the attractive cue is presented in a gradient, such as being released from a micropipette positioned to one side of a growth cone, the incorporation of rhodamine-actin onto F-actin barbed ends will be greater in the growth cone side toward the micropipette. Growth cones are small and delicate cell structures. The procedures of permeabilization, rhodamine-actin incorporation, fixation and fluorescence visualization are all carefully done and can be conducted on the stage of an inverted microscope. These methods can be applied to studying local actin polymerization in migrating neurons, other primary tissue cells or cell lines.

Activation of ADF/cofilin mediates attractive growth cone turning toward nerve growth factor and netrin‐1

Proper neural circuitry requires that growth cones, motile tips of extending axons, respond to molecular guidance cues expressed in the developing organism. However, it is unclear how guidance cues modify the cytoskeleton to guide growth cone pathfinding. Here, we show acute treatment with two attractive guidance cues, nerve growth factor (NGF) and netrin-1, for embryonic dorsal root ganglion and temporal retinal neurons, respectively, results in increased growth cone membrane protrusion, actin polymerization, and filamentous actin (F-actin). ADF/cofilin (AC) family proteins facilitate F-actin dynamics, and we found the inactive phosphorylated form of AC is decreased in NGF- or netrin-1-treated growth cones. Directly increasing AC activity mimics addition of NGF or netrin-1 to increase growth cone protrusion and F-actin levels. Extracellular gradients of NGF, netrin-1, and a cell-permeable AC elicit attractive growth cone turning and increased F-actin barbed ends, F-actin accumulation, and active AC in growth cone regions proximal to the gradient source. Reducing AC activity blunts turning responses to NGF and netrin. Our results suggest that gradients of NGF and netrin-1 locally activate AC to promote actin polymerization and subsequent growth cone turning toward the side containing higher AC activity.

VASP is a CXCR2-interacting protein that regulates CXCR2-mediated polarization and chemotaxis

Chemotaxis regulates the recruitment of leukocytes, which is integral for a number of biological processes and is mediated through the interaction of chemokines with seven transmembrane G-protein-coupled receptors. Several studies have indicated that chemotactic signaling pathways might be activated via G-protein-independent mechanisms, perhaps through novel receptor-interacting proteins. CXCR2 is a major chemokine receptor expressed on neutrophils. We used a proteomics approach to identify unique ligand-dependent CXCR2-interacting proteins in differentiated neutrophil-like HL-60 cells. Using this approach, vasodilator-stimulated phosphoprotein (VASP) was identified as a CXCR2-interacting protein. The interaction between CXCR2 and VASP is direct and enhanced by CXCL8 stimulation, which triggers VASP phosphorylation via PKA- and PKCdelta-mediated pathways. The interaction between CXCR2 and VASP requires free F-actin barbed ends to recruit VASP to the leading edge. Finally, knockdown of VASP in HL-60 cells results in severely impaired CXCR2-mediated chemotaxis and polarization. These data provide the first demonstration that direct interaction of VASP with CXCR2 is essential for proper CXCR2 function and demonstrate a crucial role for VASP in mediating chemotaxis in leukocytes.

The Physics of Filopodial Protrusion

Filopodium, a spike-like actin protrusion at the leading edge of migrating cells, functions as a sensor of the local environment and has a mechanical role in protrusion. We use modeling to examine mechanics and spatial-temporal dynamics of filopodia. We find that >10 actin filaments have to be bundled to overcome the membrane resistance and that the filopodial length is limited by buckling for 10–30 filaments and by G-actin diffusion for >30 filaments. There is an optimal number of bundled filaments, ∼30, at which the filopodial length can reach a few microns. The model explains characteristic interfilopodial distance of a few microns as a balance of initiation, lateral drift, and merging of the filopodia. The theory suggests that F-actin barbed ends have to be focused and protected from capping (the capping rate has to decrease one order of magnitude) once every hundred seconds per micron of the leading edge to initiate the observed number of filopodia. The model generates testable predictions about how filopodial length, rate of growth, and interfilopodial distance should depend on the number of bundled filaments, membrane resistance, lamellipodial protrusion rate, and G-actin diffusion coefficient.

Structural insights into actin-binding, branching and bundling proteins

Structural advances in our understanding of the functions of the actin cytoskeleton have come from diverse sources. On the one hand, the determination of the structure of a bacterial actin-like protein MreB reveals the prokaryotic origins of the actin cytoskeleton, whereas on the other, cryo-electron microscopy and crystallography have yielded reconstructions of many actin crosslinking, regulatory and binding proteins in complex with F-actin. Not least, a high-resolution structure of the Arp2/3 complex and a reconstruction with F-actin provides considerable insight into the eukaryotic machinery, vital for the formation of new F-actin barbed ends, a prerequisite for rapid actin polymerisation involved in cell shape change and motility.

Fibronectin induces pseudopod formation and cell migration by mobilizing internal Ca(2+) in blastoderm cells from medaka embryos.

During vertebrate embryogenesis, blastoderm cells at the gastrula stage migrate to new locations for subsequent development. The cellular mechanism of migration was studied in medaka (Oryzias latipes) embryos at the early gastrula stage. When fibronectin was applied iontophoretically or by the puff method, cell surface protrusion known as pseudopods and a local [Ca(2+)](i) rise at the site of application were observed in approximately half of the isolated blastoderm cells. When the pseudopod adhered to the substrate, the cell body moved toward the direction of the pseudopod as [Ca(2+)](i) declined and the pseudopod was withdrawn. Local puff application of ionomycin, a Ca(2+) ionophore, in the presence of external Ca(2+) induced protrusions of the plasma membrane similar to pseudopods, suggesting that the [Ca(2+)](i) rise itself is causing pseudopod formation. On the other hand, fibronectin induced pseudopods even in the absence of external Ca(2+), suggesting the mobilization of Ca(2+) from internal stores. In accordance with this interpretation, fibronectin failed to induce [Ca(2+)](i) rises after pretreatment with thapsigargin, a blocker of Ca(2+)-ATPase in the endoplasmic reticulum. Furthermore, chelating internal Ca(2+) with BAPTA prevented fibronectin from inducing pseudopods. U-73122, a blocker of phospholipase C, completely suppressed both the [Ca(2+)](i) rise and morphological changes accompanied with fibronectin application, suggesting involvement of the inositol phosphate pathway. On the other hand, caffeine evoked a [Ca(2+)](i) rise in a great majority of the fibronectin-responsive cells and the percentage of fibronectin-responsive cells was greatly reduced by a blocking dose of ryanodine. These results suggest that fibronectin activates phospholipase C and the initial [Ca(2+)](i) rise through IP(3) receptors further activates ryanodine receptors, achieving the local [Ca(2+)](i) rise. The decay time course of [Ca(2+)](i) after fibronectin application was prolonged in the absence of external Na(+). DCB, an inhibitor of Na(+)/Ca(2+) exchangers, also prolonged the time course of the [Ca(2+)](i) decay, suggesting the contribution of Na(+)/Ca(2+) exchangers. Cytochalasin D, an inhibitor of actin polymerization by binding to the barbed end of F-actin, induced swelling in fibronectin-responsive cells and prevented fibronectin from inducing pseudopod formation without suppressing the [Ca(2+)](i) rise. These results support the hypothesis that fibronectin facilitates cell migration via pseudopod formation during gastrulation.

Length distribution of F-actin in Dictyostelium discoideum.

Inhibition of deoxyribonuclease I activity was used to assay the actin monomers and the pointed ends of actin filaments in lysates of Dictyostelium discoideum. The KD for the binding reaction was 0.2-0.3 nM. Total cellular actin was 93 microM in monomers (approximately 0.1 fmol/cell) of which roughly half was initially polymeric. Essentially all of the filamentous actin (F-actin) was readily pelleted in the microcentrifuge and was therefore presumed to be in the cytoskeleton. Free F-actin barbed ends, measured as pelletable [3H]cytochalasin B, numbered 1.8 x 10(5)/cell; nuclei for the polymerization of rabbit muscle globular (monomeric) actin numbered 2.0 x 10(5)/cell; and pointed ends, determined by their inhibition of deoxyribonuclease I, numbered 3.6 x 10(5)/cell. These values suggest that half the barbed ends might be occluded. On average, the filaments contained approximately 76 subunits and were therefore about 0.2 micron long. The distribution of their lengths was estimated from the time course of depolymerization following vast dilution. Three populations were defined. In one experiment, the smallest population contained 71% of the F-actin mass and 96% of the pointed ends; these filaments averaged 80 subunits or 0.22 microns in length. An intermediate population contained 14% of the F-actin mass and 3% of the filaments; these were roughly 460 subunits (1.3 microns) long. The largest population contained 15% of the F-actin mass in about 0.3% of the filaments; these were 13 microns in length, about the diameter of the cell. The numerous short filaments might populate a cortical mesh, while the long filaments might constitute endoplasmic bundles.

A Fragmin-Like Protein from Plasmodium of Physarum polycephalum That Severs F-Actin and Caps the Barbed End of F-Actin in a Ca2+-Sensitive Way1

Many protein factors regulating actin polymerization can be extracted from plasmodia of Physarum polycephalum in the presence of a high EGTA concentration (30 mM). A protein factor with the molecular weight of 60,000 (60 kDa protein) was especially interesting because of its fragmin-like properties. We purified and characterized this 60 kDa protein in the present study. The purified 60 kDa protein enhanced the initial rate of G-actin polymerization, severed F-actin, and capped the barbed end of F-actin in a Ca2+-dependent way. The threshold concentration for Ca2+ was around 10(-6) M. The flow birefringence measurement showed that the length of F-actin decreased from 2.8 to 1.0 microns depending on the concentration of 60 kDa protein added to F-actin. These properties were identical to those of fragmin (Mr 42,000) isolated from plasmodia (Hasegawa et al. (1980) Biochemistry 19, 2677-2683). However, the molecular weight, the tryptic peptide map, and the cross-reactivities with polyclonal anti-fragmin antibodies were different from those of fragmin. We concluded from these results that 60 kDa protein is a new Ca2+-sensitive F-actin-severing protein. Considering its similarity to fragmin, we termed the 60 kDa protein fragmin 60.

The 45K molecular weight actin-modulating protein from sea urchin eggs forms a complex with actin in the presence of calcium ions.

The 45K protein from sea urchin eggs forms a complex with actin in the presence of Ca2+. The fraction was not readily dissociated on depletion of Ca2+ by gel filtration, but was dissociated on dialysis against an EGTA-containing solution. The free 45K protein and the 45K protein-actin complex affect F-actin in different manners in the presence of Ca2+. The former severs F-actin in the presence of Ca2+ but not in its absence, while the latter caps the barbed end of F-actin in a Ca2+-independent manner thereby lowering the viscosity of F-actin slowly.