Extracellular Matrix Mineralization Research Articles

Preparation of Ag@3D-TiO2 Scaffolds and Determination of its Antimicrobial Properties and Osteogenesis-promoting Ability.

The micro-nano structure of 3D-printed porous titanium (Ti) alloy with excellent performance in avoiding stress shielding and promoting bone tissue differentiation provides a new opportunity for the development of bone implants, but it necessitates higher requirements for bone tissue differentiation and the antibacterial properties of bone implants in clinical practice. This study investigated the preparation, antimicrobial properties, and osteogenesis-promoting ability of the 3D printed porous Ti alloy anodic oxidized Ag-carrying (Ag@3D-TiO2) scaffolds. The 3D printed porous Ti alloy (3D-Ti), anodized 3D printed porous Ti alloy (3D-TiO2), and Ag@3D-TiO2 scaffolds were synthesized using electron beam melting. The antimicrobial properties of the scaffolds were examined using antibacterial tests and their cytocompatibility was assessed using a cell proliferation assay and acridine orange/ethidium bromide (AO/EB) staining. In vitro cellular assays were used to investigate the effects of the scaffold microstructural features on cell activity, proliferation, and osteogenesis-related genes and proteins. In vivo animal experiments were used to evaluate the anti-inflammatory and osteogenesis-promoting abilities of the scaffolds. The Ag@3D-TiO2 scaffolds exhibited sustained anti-microbial activity over time, enhanced cell proliferation, facilitated osteogenic differentiation, and increased extracellular matrix mineralization. In addition, alkaline phosphatase (ALP), collagen type I (COL-I), and osteocalcin (OCN)-related genes and proteins were upregulated. In vivo animal implantation experiments, the anti-inflammatory effect of the Ag@3D-TiO2 scaffolds were observed using histology, and a large amount of fibrous connective tissue was present around it; the Ag@3D-TiO2 scaffolds were more bio-compatible with the surrounding tissues compared with 3D-Ti and 3D-TiO2; a large amount of uniformly distributed neoplastic bone tissue existed in their pores, and the chronic systemic toxicity test showed that the 3D-Ti, 3D-TiO2, and Ag@3D-TiO2 scaffolds are biologically safe. The goal of this study was to create a scaffold that exhibits antimicrobial properties and can aid bone growth, making it highly suitable for use in bone tissue engineering.

Organic Matrices of Calcium Carbonate Biominerals Improve Osteoblastic Mineralization.

Many organisms incorporate inorganic solids into their tissues to improve functional and mechanical properties. The resulting mineralized tissues are called biominerals. Several studies have shown that nacreous biominerals induce osteoblastic extracellular mineralization. Among them, Pinctada margaritifera is well known for the ability of its organic matrix to stimulate bone cells. In this context, we aimed to study the effects of shell extracts from three other Pinctada species (Pinctada radiata, Pinctada maxima, and Pinctada fucata) on osteoblastic extracellular matrix mineralization, by using an in vitro model of mouse osteoblastic precursor cells (MC3T3-E1). For a better understanding of the Pinctada-bone mineralization relationship, we evaluated the effects of 4 other nacreous mollusks that are phylogenetically distant and distinct from the Pinctada genus. In addition, we tested 12 non-nacreous mollusks and one extra-group. Biomineral shell powders were prepared, and their organic matrix was partially extracted using ethanol. Firstly, the effect of these powders and extracts was assessed on the viability of MC3T3-E1. Our results indicated that neither the powder nor the ethanol-soluble matrix (ESM) affected cell viability at low concentrations. Then, we evaluated osteoblastic mineralization using Alizarin Red staining and we found a prominent MC3T3-E1 mineralization mainly induced by nacreous biominerals, especially those belonging to the Pinctada genus. However, few non-nacreous biominerals were also able to stimulate the extracellular mineralization. Overall, our findings validate the remarkable ability of CaCO3 biomineral extracts to promote bone mineralization. Nevertheless, further in vitro and in vivo studies are needed to uncover the mechanisms of action of biominerals in bone.

Methodology and Characterization of a 3D Bone Organoid Model Derived from Murine Cells.

Here, we report on the development of a cost-effective, well-characterized three-dimensional (3D) model of bone homeostasis derived from commonly available stocks of immortalized murine cell lines and laboratory reagents. This 3D murine-cell-derived bone organoid model (3D-mcBOM) is adaptable to a range of contexts and can be used in conjunction with surrogates of osteoblast and osteoclast function to study cellular and molecular mechanisms that affect bone homeostasis in vitro or to augment in vivo models of physiology or disease. The 3D-mcBOM was established using a pre-osteoblast murine cell line, which was seeded into a hydrogel extracellular matrix (ECM) and differentiated into functional osteoblasts (OBs). The OBs mineralized the hydrogel ECM, leading to the deposition and consolidation of hydroxyapatite into bone-like organoids. Fourier-transform infrared (FTIR) spectroscopy confirmed that the mineralized matrix formed in the 3D-mcBOM was bone. The histological staining of 3D-mcBOM samples indicated a consistent rate of ECM mineralization. Type I collagen C-telopeptide (CTX1) analysis was used to evaluate the dynamics of OC differentiation and activity. Reliable 3D models of bone formation and homeostasis align with current ethical trends to reduce the use of animal models. This functional model of bone homeostasis provides a cost-effective model system using immortalized cell lines and easily procured supplemental compounds, which can be assessed by measuring surrogates of OB and OC function to study the effects of various stimuli in future experimental evaluations of bone homeostasis.

Design and characterization of 3D printed pore gradient hydrogel scaffold for bone tissue engineering

Macroporous hydrogel scaffolds are widely used in tissue engineering to promote cell growth and proliferation. Aiming to enhance cell seeding efficiency and facilitate the osteodifferentiation of mesenchymal stem cells, this study demonstrates the fabrication of pore gradient biodegradable hydrogel scaffolds inspired by natural bone structure for bone tissue engineering applications. The scaffolds were fabricated via extrusion-based 3D printing, using sequential deposition of three customized Gelatin/Oxidized Alginate - based inks with subsequent cryogenic crosslinking for permanent structure fixation. The resulting constructs were characterized and featured a continuous gradient morphology with pore sizes ranging from 10 to 300 μm. The gradient scaffolds exhibited improved mechanical stability, with a compression resistance of 149 kPa, as opposed to the non-gradient scaffold's 116 kPa at 70 % strain, and a sustained degradation rate with only a 10 % loss of its initial weight within three weeks. Gradient scaffolds demonstrated a doubling of cell seeding efficiency to 47 % with dense and homogeneously distributed cellular layers, as evidenced by confocal and electron microscopy. Furthermore, the gradient scaffolds demonstrated superior osteodifferentiation, with significantly higher ALP and DMP1 production and enhanced extracellular matrix mineralization compared to gradientless macroporous scaffolds. This study provides insights into the design of macroporous scaffolds and emphasizes the advantages of pore gradient over homogeneous gradientless morphologies.

An Injectable Magnesium-Based Cement Stimulated with NIR for Drug-Controlled Release and Osteogenic Potential.

Magnesium phosphate bone cement (MPC) has gained widespread usage in orthopedic implantation due to its fast-setting and high initial strength benefits. However, the simultaneous attainment of drug-controlled release and osteogenic potential in MPC remains a significant challenge. Herein, a strategy to create a smart injectable cement system using nanocontainers and chondroitin sulfate is proposed. It employs nanocontainers containing alendronate-loaded mesoporous silica nanoparticles, which are surface-modified with polypyrrole to control drug release in response to near-infrared (NIR) stimulation. The alendronate-incorporated cement (ACMPC) exhibits improved compressive strength (70.6 ± 5.9 MPa), prolonged setting time (913 s), and exceptional injectability (96.5% of injection rate and 242 s of injection time). It also shows the capability to prevent degradation, thus preserving mechanical properties. Under NIR irradiation, the cement shows good antibacterial properties due to the combined impact of hyperthermia, reactive oxygen species, and alendronate. Furthermore, the ACMPC (NIR) group displays good biocompatibility and osteogenesis capabilities, which also lead to an increase in alkaline phosphatase activity, extracellular matrix mineralization, and the upregulation of osteogenic genes. This research has significant implications for developing multifunctional biomaterials and clinical applications.

Pluronic F127 hydrogel-loaded extracellular vesicles from adipose-derived mesenchymal stem cells promote tracheal cartilage regeneration via SCNN1B delivery

Extracellular vesicles (EVs) derived from adipose-derived mesenchymal stem cells (AMSC-EVs) have been highlighted as a cell-free therapy due to their regenerative capability to enhance tissue and organ regeneration. Herein, we aimed to examine the mechanism of PF127-hydrogel@AMSC-EVs in promoting tracheal cartilage defect repair. Based on bioinformatics methods, SCNN1B was identified as a key gene for the osteogenic differentiation of AMSCs induced by AMSC-EVs. EVs were isolated from rat AMSCs and then loaded onto thermo-sensitive PF-127 hydrogel to develop PF127-hydrogel@AMSC-EVs. It was established that PF127-hydrogel@AMSC-EVs could effectively deliver SCNN1B into AMSCs, where SCNN1B promoted AMSC osteogenic differentiation. The promotive effect was evidenced by enhanced ALP activity, extracellular matrix mineralization, and expression of s-glycosaminoglycan, RUNX2, OCN, collagen II, PERK, and ATF4. Furthermore, the in vivo experiments revealed that PF127-hydrogel@AMSC-SCNN1B-EVs stimulated tracheal cartilage regeneration in rats through PERK/ATF4 signaling axis activation. Therefore, PF127-hydrogel@AMSC-SCNN1B-EVs may be a novel cell-free biomaterial to facilitate tracheal cartilage regeneration and cartilage injury repair.

Osteoporosis GWAS-implicated DNM3 locus contextually regulates osteoblastic and chondrogenic fate of mesenchymal stem/progenitor cells through oscillating miR-199a-5p levels.

Genome wide association study (GWAS)-implicated bone mineral density (BMD) signals have been shown to localize in cis-regulatory regions of distal effector genes using 3D genomic methods. Detailed characterization of such genes can reveal novel causal genes for BMD determination. Here, we elected to characterize the "DNM3" locus on chr1q24, where the long non-coding RNA DNM3OS and the embedded microRNA MIR199A2 (miR-199a-5p) are implicated as effector genes contacted by the region harboring variation in linkage disequilibrium with BMD-associated sentinel single nucleotide polymorphism, rs12041600. During osteoblast differentiation of human mesenchymal stem/progenitor cells (hMSC), miR-199a-5p expression was temporally decreased and correlated with the induction of osteoblastic transcription factors RUNX2 and Osterix. Functional relevance of miR-199a-5p downregulation in osteoblastogenesis was investigated by introducing miR-199a-5p mimic into hMSC. Cells overexpressing miR-199a-5p depicted a cobblestone-like morphological change and failed to produce BMP2-dependent extracellular matrix mineralization. Mechanistically, a miR-199a-5p mimic modified hMSC propagated normal SMAD1/5/9 signaling and expressed osteoblastic transcription factors RUNX2 and Osterix but depicted pronounced upregulation of SOX9 and enhanced expression of essential chondrogenic genes ACAN, COMP, and COL10A1. Mineralization defects, morphological changes, and enhanced chondrogenic gene expression associated with miR-199a-5p mimic over-expression were restored with miR-199a-5p inhibitor suggesting specificity of miR-199a-5p in chondrogenic fate specification. The expression of both the DNM3OS and miR-199a-5p temporally increased and correlated with hMSC chondrogenic differentiation. Although miR-199a-5p overexpression failed to further enhance chondrogenesis, blocking miR-199a-5p activity significantly reduced chondrogenic pellet size, extracellular matrix deposition, and chondrogenic gene expression. Taken together, our results indicate that oscillating miR-199a-5p levels dictate hMSC osteoblast or chondrocyte terminal fate. Our study highlights a functional role of miR-199a-5p as a BMD effector gene at the DNM3 BMD GWAS locus, where patients with cis-regulatory genetic variation which increases miR-199a-5p expression could lead to reduced osteoblast activity.

Porous Titanium/SF Sponge Composite Scaffold with Loads of Gentamicin and Small Extracellular Vesicles to Improve Antibacterial and Osteogenesis Properties

AbstractAdditive manufacturing has been widely used for producing porous titanium orthopedic implants. However, the higher surface area inherent to porous structures increases the risk of bacterial colonization. In this work, composite scaffolds with dual functions of the antibacterial and osteogenesis promotion properties are developed. The porous titanium is fabricated using a selective laser melting process to provide mechanical support. Silk fibrin (SF) sponge‐loading gentamicin and extracellular vesicles (EVs) are prepared in the pores of the porous titanium. The developed composite scaffolds are investigated for their antibacterial and osteogenesis effects. The samples exhibit well antibacterial activity against Escherichia coli. The samples also show good cytocompatibility, effectively promoting the adhesion and proliferation of the bone marrow mesenchymal stem cells (rBMSCs). EVs significantly promote the expression of osteogenesis‐related genes in rBMCSs and the superior extracellular matrix mineralization reveals that EVs have a remarkable role in enhancing osteogenic differentiation. Therefore, the composite scaffolds with dual functions of antibacterial and osteogenesis promotion properties have excellent potential for orthopedic implant applications.

Enhancing the angiogenesis and osteogenesis of low elastic modulus Ti-Nb-Zr-Sn alloy surface through grafting growth factors-containing gelatin nanoparticles

The study aimed to apply a multiple surface modification for low elastic modulus Ti-24 % Nb-4 % Zr-8 % Sn (Ti2448) alloy, to enhance its biological properties for bone implant applications. We employed a combined sandblasting/acid etching/alkaline etching process to modify the Ti2448 alloy surfaces with mixed nano/submicron/micron-scaled pits and super wettability. We prepared gelatin nanoparticles (GNPs) loaded with growth factors: vascular endothelial growth factor/platelet-derived growth factor (VEGF/PDGF) and/or bone morphogenetic protein-2 (BMP-2). The growth factors-containing GNPs were then sequentially grafted onto the surface-modified Ti2448 alloy in a layered (single layer: BMP-2 or VEGF/PDGF; double layer: inner BMP-2 and outer VEGF/PDGF) or mixed BMP-2/VEGF/PDGF manner. Surface characterizations, including morphology, roughness, surface energy, and cytotoxicity, of Ti2448 alloy were analyzed. For biological response, we investigated the tube formation ability of human umbilical vein endothelial cells (HUVECs) and the cell responses (adhesion, proliferation, and mineralization) of human bone marrow mesenchymal stem cells (hMSCs). The results demonstrated the successful preparation of GNPs with 200∼300 nm particle size and their successful loading with the growth factors using natural crosslinker genipin. The growth factor-containing GNPs were effectively grafted onto the surface-modified hydrophilic Ti2448 alloy without significantly reducing its wettability (water contact angle remained below 40°). The results of the study showed that the GNPs-grafted Ti2448 alloy surfaces, with the GNPs loaded with VEGF/PDGF and/or BMP-2, exhibited enhanced biological properties. The GNPs-grafted surfaces were found to be non-toxic and capable of promoting tube formation of HUVECs, particularly when single VEGF/PDGF layer or double (inner BMP-2/ outer VEGF/PDGF) layer was loaded on GNPs (enhancing the cumulative tube length approximately 1.4 times that of no GNPs-grafted surfaces). Moreover, the GNPs-grafted surfaces enhanced the adhesion-related proteins and extracellular matrix mineralization of hMSCs, particularly with the loading of single VEGF/PDGF or mixed VEGF/PDGF/BMP-2 on GNPs (enhancing αvβ3 integrin patch number > 3.5 times, vinculin patch number > 2 times, and mineralization approximately 1.4 times). Based on these findings, we concluded that the proposed Ti2448 alloy surfaces, when grafted with VEGF/PDGF- and/or BMP-2-containing GNPs, have the potential for bone implant applications. The surface modifications on the Ti2448 alloy may promote angiogenesis in the early stage of bone repair (through VEGF/PDGF) and osteogenesis in the late stage (through BMP-2), thereby accelerating the overall bone healing process.

A polylactic acid/hydroxyapatite/scholzite composite scaffold for promoting healing of osteoporotic bone defects in rats

To investigate the release kinetics of Zn2+ from nZCP-loaded polylactic acid/hydroxyapatite (PLA/HA) composite scaffold (PHZ) and determine the optimal nZCP content in the scaffold. The particle size of nZCP was measured by DLS measurement, and PXRD, FTIR, and SEM were used to characterize the scaffolds and nZCP distribution; EDS was used to analyze element composition of the scaffold. Compression strength of the scaffold was determined, and ion release profile was investigated using ICP-MS. The biocompatibility of the materials was evaluated by CCK-8 assay and dead/alive staining of rat bone marrow stem cells (BMSCs) incubated with their aqueous extracts. ALP staining, alizarin red staining, RT-qPCR, and Western blotting were used to assess the osteogenic potential of the treated cells. In a rat model of bilateral ovariectomy (OVX) with femoral condylar bone defect, PHZ-1, PHZ-2, PHZ-3 or PLA/HA scaffold was implanted into the bone defect, and bone repair was observed using a microCT scanner and histological staining at 6 and 12 weeks. DLS, PXRD, SEM, FTIR, and EDS confirmed successful synthesis of 10-nm ZCP and efficient nZCP loading in the scaffold. PHZ-2 and PHZ-3 had significantly greater compression strength than PLA/HA. ICP-MS showed that Zn2+ release from PHZ-1, PHZ-2 and PHZ-3 were all optimal for promoting osteogenesis. In rat BMSCs, all the 4 scaffolds showed good biocompatibility, and their extracts enhanced ALP activity and extracellular matrix mineralization and promoted expressions of ALP, RUNX2, and OCN in the cells. In the rat models, nZCP in the implants improved bone graft integration at 6 weeks, and PHZ-2 and PHZ-3 more effectively induced new bone formation at 12 weeks (P < 0.05). PHZ scaffold is capable of stable Zn2+ release to promote osteoporotic bone defect healing, and PHZ-2 and PHZ-3 scaffolds with nZCP mass fraction of 4.5%-7.5% have better osteogenic activity.

Fabrication and evaluation of composite hydroxyapatite coating on ordered micro-/nanotextured titanium surface

Objective: To develope a titanium specimen with good osteogenic activity through fabrication of a composite hydroxyapatite coating on ordered micro-/nanotextured titanium surface. Methods: An ordered micro-/nanotextured structure was prepared on the surface of titanium (the control), and then hydroxyapatite was deposited on the as-prepared ordered micro-/nanotextured structure by alternative loop immersion method. The ordered micro-/nanotextured structures before and after hydroxyapatite deposition were denoted as HA and MN, respectively. Surface morphology was observed using a scanning electron microscope. Bone marrow mesenchymal stem cells (BMMSC) were seeded on the surface of three different materials. Cell morphology was observed with a scanning electron microscope. Cell adhesion and cell proliferation were evaluated using 4', 6-diamidino-2-phenylindole staining and cell counting kit-8 assay, respectively. Extracellular matrix mineralization and the expression levels of osteogenesis-related genes were evaluated by alizarin red staining and real-time quantitative PCR, respectively. Each group has three samples in every experiment. Results: After alternative loop immersing, the MN's original microholes (20 μm in diameter) were retained, and the uniform petal-like hydroxyapatite was deposited on the MN's original titania nanotubes (70 nm in diameter). Compared with the control, BMMSC on MN and HA elongated further and intersected along the micron structure with noticeable pseudopodia and pseudoplates, and the trend was more pronounced especially on HA. The number of early adherent cells on HA was remarkably larger than that on the control and MN at each time point (P<0.05). On day 1, the A value of cell proliferation on HA was significantly higher than that on the control and MN (P<0.05). The A value of cell proliferation on HA was significantly lower than that on the control and MN on day 3 (P<0.05). On day 7, the A value of cell proliferation on HA was significantly lower than that on MN (P<0.05), but there was no statistically significant difference in the A value of cell proliferation between HA and the control on day 7 (P>0.05). The Avalue of extracellular matrix mineralization on HA (0.607±0.011) was significantly higher than that on the control and MN (0.268±0.025 and 0.522±0.022, respectively) (t=-0.25, P<0.001; t=-0.34, P<0.001). The expression levels of bone related genes on HA were significantly higher than those on the control and MN (P<0.05). Conclusions: HA could promote the BMMSC adhesion and osteogenic differentiation, support BMMSC proliferation, and demonstrate good osteogenic activity.

Early insights into the role of Exoc6B associated with spondyloepimetaphyseal dysplasia with joint laxity type 3 in primary ciliogenesis and chondrogenic differentiation in vitro.

Spondyloepimetaphyseal dysplasia with joint laxity type 3 (SEMDJL3) is a rare skeletal dysplasia associated with EXOC6B, a component of the exocyst complex, involved in vesicle tethering and exocytosis at the plasma membrane. So far, EXOC6B and the pathomechanisms underlying SEMDJL3 remain obscure. Exoc6b was detected largely at the perinuclear regions and the primary cilia base in ATDC5 prechondrocytes. Its shRNA lentiviral knockdown impeded primary ciliogenesis. In Exoc6b silenced prechondrocytes, Hedgehog signaling was attenuated, including when stimulated with Smoothened agonist. Exoc6b knockdown deregulated the mRNA and protein levels of Col2a1, a marker of chondrocyte proliferation at 7- and 14-days following differentiation. It led to the upregulation of Ihh another marker of proliferative chondrocytes. The levels of Col10a1, a marker of chondrocyte hypertrophy was enhanced at 14 days of differentiation. Congruently, Axin2, a canonical Wnt pathway modulator that inhibits chondrocyte hypertrophy was repressed. The expression of Mmp13 and Adamts4 that are terminal chondrocyte hypertrophy markers involved in extracellular matrix (ECM) remodelling were downregulated at 7 and 14 days of chondrogenesis. Bglap that encodes for the most abundant non-collagenous bone matrix constituent and promotesECM calcification was suppressed at 14 days of chondrocyte differentiation. ECM mineralization was assessed by Alizarin Red staining. Gene expression and ciliogenesis were investigated by reverse transcription quantitative real-time PCR, immunoblotting, and immunocytochemistry. These findings provide initial insights into the potential role of Exoc6b in primary ciliogenesis and chondrogenic differentiation, contributing towards a preliminary understanding of the molecular pathomechanisms underlying SEMDJL3.

Balancing the Anti‐Bacterial and Pro‐Osteogenic Properties of Ti‐Based Implants by Partial Conversion of ZnO Nanorods into Hybrid Zinc Phosphate Nanostructures

AbstractBacterial infection and inferior osseointegration are major complications associated with titanium (Ti) based implants. Although surface‐engineered zinc oxide (ZnO) nanorods exhibit remarkable antibacterial ability, their potential biomedical applications are hampered by their pronounced cytotoxicity. Herein, inspired by the in vivo degradation process of znic, ZnO nanorods are converted into thermodynamically more stable zinc phosphate (Zn3(PO4)2 ）through a simple hydrothermal treatment in a hydrogen phosphate solution. By adjusting the conversion ratio, the surface morphology, release of zinc ions (Zn2+), and generation of reactive oxygen species can be finely tailored to overcome the cytotoxicity of ZnO nanorods while preserving their antibacterial capability. Furthermore, an optimized amount of Zn2+ released from the ZnO/Zn3(PO4)2 hybrid coating enhances osteogenic differentiation and extracellular matrix mineralization of human bone marrow mesenchymal stem cells by reprogramming their metabolic configuration. An implant‐related infection model in rabbit femurs indicates that the hybrid ZnO/Zn3(PO4)2 coating can even promote osseointegration in the presence of pathogenic bacteria. This surface modification strategy which endows Ti‐based implants with superior anti‐bacterial and pro‐osteogenic properties holds great clinical potential for orthopedic and dental applications.

Self-Assembled Multilayered Coatings with Multiple Cyclic Self-Healing Capability, Bacteria Killing, Osteogenesis, and Angiogenesis Properties on Magnesium Alloys.

Self-healing coatings improve the durability of magnesium (Mg) implants, but rapid corrosion still poses a challenge in the healing stage. Moreover, Mg-based materials with acceptable bacteria killing, osteogenic and angiogenic properties are challenging in biomedical applications. Herein, the self-healing polymeric coatings are fabricated on Mg alloys using the spin-assisted layer-by-layer (SLbL) assembly of hyaluronic acid (HA) and branched polyethyleneimine (bPEI) followed by chemical crosslinking treatment. The self-healing coatings show excellent adhesion strength and structure stability. The corrosion resistance is improved due to the physical barrier of polymer coatings, which also promotes the formation of hydroxyapatite (HAp) during degradation for further protection of Mg substrate. Owing to the dynamic reversible hydrogen bonds existing between HA and bPEI, the crosslinked multilayered coatings possess fast, substantial, and cyclic self-healing capabilities leading to restoration of the original structure and functions. Invitro investigations reveal that the self-healing coatings have multiple functionalities pertaining to bacteria killing, cytocompatibility, osteogenesis, as well as angiogenesis. In addition, the self-healing coatings stimulate alkaline phosphatase activity (ALP), extracellular matrix (ECM) mineralization, and the expression of osteogenesis-related genes of mBMSCs and HUVECs. This study reveals a feasible strategy to design and prepare versatile self-healing coatings on Mg implants for biomedical applications.

Incorporating pH/NIR responsive nanocontainers into a smart self-healing coating for a magnesium alloy with controlled drug release, bacteria killing and osteogenesis properties

Magnesium (Mg)-based orthopedic implant materials can potentially be protected from deterioration using a protective polymer coating. However, this coating is susceptible to excessive corrosion and accidental scratches. Moreover, the inadequate bone integration and infections associated with bone implants present additional challenges that hinder their effective use. In this work, a spin-spray layer-by-layer (SSLbL) assembly technique was employed to develop a smart self-healing coating for Mg alloy WE43. This coating was based on paeonol-encapsulated nanocontainers (PMP) that were modified with a stimuli-responsive polydopamine (PDA). The leached paeonol could form a compact chelating layer when complexed with Mg2+ ions. Dynamic reversible hydrogen bonds were formed between assembly units, which ensured that the hybrid coating possessed rapid and cyclic self-healing properties. Under 808 nm near-infrared (NIR) laser irradiation, the self-healing coating exhibited antibacterial properties due to the synergistic effects of hyperthermia, reactive oxygen species (ROS), and paeonol. In addition, the incorporation of nanoparticles into the hybrid coating led to improvements in the cytocompatibility and osteogenic properties of the implant material. The smart coating enhanced alkaline phosphatase activity, extracellular matrix (ECM) mineralization, and the expression of osteogenic genes. This study presents a promising opportunity to explore the application of a smart self-healing coating for a Mg alloy. Statement of significanceHerein, we report a self-healing coating comprised of polyethyleneimine and nanocontainer-crosslinked hyaluronic acid to achieve drug-controlled release, antimicrobial activity, and osteogenesis performance. The formation of hydrogen bonds between HA and PEI facilitated the self-assembly process, thereby improving the coating's corrosion resistance and adhesion strength. The hybrid coating exhibited a rapid and cyclic self-healing activity due to paeonol and dynamic reversible bonds. The release of paeonol was controlled by pH and NIR stimuli owing to polydopamine modification. In vitro testing revealed that the hybrid coating achieved effective bacteria eradication through synergistic effects of hyperthermia, reactive oxygen species, and paeonol. Moreover, the smart coating was found to enhance alkaline phosphatase activity, extracellular matrix mineralization, and the expression of osteogenic genes.

An osteoporosis bone defect regeneration strategy via three-dimension short fibers loaded with alendronate modified hydroxyapatite

Osteoporotic bone defect has become clinic challenge due to its morbid bone microenvironment. Overactive bone resorption and limited bone formation lead to unstable combination between bone tissue and scaffolds. Electrospinning has been widely used in guide tissue membrane, but its barrier property results in limited application. In order to optimize the structure and add anti-bone resorption function of electrospinning fibers, we exploited the application of short fibers generated by homogenization at osteoporotic tibial bone defect. The modified nano-hydroxyapatite (m-HA) was loaded with alendronate. It overcame the problem that hydrophilic drugs were difficult to distribute uniformly in hydrophobic fibers. We confirmed that m-HA was loaded into polycaprolactone (PCL) short fibers. PCL short fibers with m-HA (PCL/m-HA) continuously released ALN, provided stable structure and showed good cytocompatibility. In vitro, PCL/m-HA increased the activity of alkaline phosphatase (ALP), promoted extracellular matrix mineralization and upregulated the expression of osteogenesis-related genes, Col 1, Alp, osteopontin (Opn) and runt-related transcription factor 2 (Runx2). In vivo, PCL/m-HA short fibers accelerated the new bone formation, inhibited the bone resorption and rebalanced the bone microenvironment through regulating osteoprotegerin (OPG) /receptor activator of NF-kB (RANKL) ratio. The above results confirmed that the PCL/m-HA short fibers achieved the application of three-dimension osteoporotic bone defect and had potential prospects in bone tissue scaffolds.

Double-Network DNA Macroporous Hydrogel Enables Aptamer-Directed Cell Recruitment to Accelerate Bone Healing.

Recruiting endogenous bone marrow mesenchymal stem cells (BMSCs) in vivo to bone defect sites shows great promise in cell therapies for bone tissue engineering, which tackles the shortcomings of delivering exogenous stem cells, including limited sources, low retention, stemness loss, and immunogenicity. However, it remains challenging to efficiently recruit stem cells while simultaneously directing cell differentiation in the dynamic microenvironment and promoting neo-regenerated tissue ingrowth to achieve augmented bone regeneration. Herein, a synthetic macroporous double-network hydrogel presenting nucleic acid aptamer and nano-inducer enhances BMSCs recruitment, and osteogenic differentiation is demonstrated. An air-in-water template enables the rapid construction of highly interconnective macroporous structures, and the physical self-assembly of DNA strands and chemical cross-linking of gelatin chains synergistically generate a resilient double network. The aptamer Apt19S and black phosphorus nanosheets-specific macroporous hydrogel demonstrate highly efficient endogenous BMSCs recruitment, cell differentiation, and extracellular matrix mineralization. Notably, the enhanced calvarial bone healing with promising matrix mineralization and new bone formation is accompanied by adapting this engineered hydrogel to the bone defects. The findings suggest an appealing material approach overcoming the traditional limitations of cell-delivery therapy that can inspire the future design of next-generation hydrogel for enhanced bone tissue regeneration.

Specific heterozygous variants in MGP lead to endoplasmic reticulum stress and cause spondyloepiphyseal dysplasia

Matrix Gla protein (MGP) is a vitamin K-dependent post-translationally modified protein, highly expressed in vascular and cartilaginous tissues. It is a potent inhibitor of extracellular matrix mineralization. Biallelic loss-of-function variants in the MGP gene cause Keutel syndrome, an autosomal recessive disorder characterized by widespread calcification of various cartilaginous tissues and skeletal and vascular anomalies. In this study, we report four individuals from two unrelated families with two heterozygous variants in MGP, both altering the cysteine 19 residue to phenylalanine or tyrosine. These individuals present with a spondyloepiphyseal skeletal dysplasia characterized by short stature with a short trunk, diffuse platyspondyly, midface retrusion, progressive epiphyseal anomalies and brachytelephalangism. We investigated the cellular and molecular effects of one of the heterozygous deleterious variants (C19F) using both cell and genetically modified mouse models. Heterozygous ‘knock-in’ mice expressing C19F MGP recapitulate most of the skeletal anomalies observed in the affected individuals. Our results suggest that the main underlying mechanism leading to the observed skeletal dysplasia is endoplasmic reticulum stress-induced apoptosis of the growth plate chondrocytes. Overall, our findings support that heterozygous variants in MGP altering the Cys19 residue cause autosomal dominant spondyloepiphyseal dysplasia, a condition distinct from Keutel syndrome both clinically and molecularly.

Hedgehog Activation for Enhanced Rotator Cuff Tendon-to-Bone Healing

Background: Rotator cuff repair is a common orthopaedic procedure, yet the rate of failure to heal after surgery is high. Repair site rupture is due to poor tendon-to-bone healing and lack of regeneration of the native fibrocartilaginous enthesis. During development, the enthesis is formed and mineralized by a pool of progenitors activated by hedgehog signaling. Furthermore, hedgehog signaling drives regenerative enthesis healing in young animals, in contrast to older animals, in which enthesis injuries heal via fibrovascular scar and without participation of hedgehog signaling. Hypothesis: Hedgehog activation improves tendon-to-bone healing in an animal model of rotator cuff repair. Study Design: Controlled laboratory study. Methods: A total of 78 adult Sprague-Dawley rats were used. Supraspinatus tendon injury and repair were completed bilaterally, with microsphere-encapsulated hedgehog agonist administered to right shoulders and control microspheres administered to left shoulders. Animals were sacrificed after 3, 14, 28, or 56 days. Gene expression and histological, biomechanical, and bone morphometric analyses were conducted. Results: At 3 days, hedgehog signaling pathway genes Gli1 (1.70; P = .029) and Smo (2.06; P = .0173), as well as Runx2 (1.69; P = .0386), a transcription factor of osteogenesis, were upregulated in treated relative to control repairs. At 14 days, transcription factors of tenogenesis, Scx (4.00; P = .041), and chondrogenesis, Sox9 (2.95; P = .010), and mineralized fibrocartilage genes Col2 (3.18; P = .031) and Colx (1.85; P = .006), were upregulated in treated relative to control repairs. Treatment promoted fibrocartilage formation at the healing interface by 28 days, with improvements in tendon-bone maturity, organization, and continuity. Treatment led to improved biomechanical properties. The material property strength (2.43 vs 1.89 N/m2; P = .046) and the structural property work to failure (29.01 vs 18.09 mJ; P = .030) were increased in treated relative to control repairs at 28 days and 56 days, respectively. Treatment had a marginal effect on bone morphometry underlying the repair. Trabecular thickness (0.08 vs 0.07 mm; P = .035) was increased at 28 days. Conclusion: Hedgehog agonist treatment activated hedgehog signaling at the tendon-to-bone repair site and prompted increased mineralized fibrocartilage production. This extracellular matrix production and mineralization resulted in improved biomechanical properties, demonstrating the therapeutic potential of hedgehog agonism for improving tendon-to-bone healing after rotator cuff repair. Clinical Relevance: This study demonstrates the therapeutic potential of hedgehog agonist treatment for improving tendon-to-bone healing after rotator cuff injury and repair.

Effect of Silicon Dioxide and Magnesium Oxide on the Printability, Degradability, Mechanical Strength and Bioactivity of 3D Printed Poly (Lactic Acid)-Tricalcium Phosphate Composite Scaffolds.

Poly (lactic acid) (PLA) is a biodegradable polyester that has been exploited for a variety of biomedical applications, including tissue engineering. The incorporation of β-tricalcium phosphate (TCP) into PLA has imparted bioactivity to the polymeric matrix. We have modified a 90%PLA-10%TCP composite with SiO2 and MgO (1, 5 and 10 wt%), separately, to further enhance the material bioactivity. Filaments were prepared by extrusion, and scaffolds were fabricated using 3D printing technology associated with fused filament fabrication. The PLA-TCP-SiO2 composites presented similar structural, thermal, and rheological properties to control PLA and PLA-TCP. In contrast, the PLA-TCP-MgO composites displayed absence of crystallinity, lower polymeric molecular weight, accelerated degradation ratio, and decreased viscosity within the 3D printing shear rate range. SiO2 and MgO particles were homogeneously dispersed within the PLA and their incorporation increased the roughness and protein adsorption of the scaffold, compared to a PLA-TCP scaffold. This favorable surface modification promoted cell proliferation, suggesting that SiO2 and MgO may have potential for enhancing the bio-integration of scaffolds in tissue engineering applications. However, high loads of MgO accelerated the polymeric degradation, leading to an acid environment that imparted the composite biocompatibility. The presence of SiO2 stimulated mesenchymal stem cells differentiation towards osteoblast; enhancing extracellular matrix mineralization, alkaline phosphatase (ALP) activity, and bone-related genes expression. The PLA-10%TCP-10%SiO2 composite presented the most promising results, especially for bone tissue regeneration, due to its intense osteogenic behavior. PLA-10%TCP-10%SiO2 could be used as an alternative implant for bone tissue engineering application.