External Magnetic Field Research Articles

Thermal gradient-induced critical current degradation in mesoscopic superconducting thin film

Abstract Superconducting materials inevitably suffer from the sudden change of temperature in localized areas in practical applications, and the concomitant thermal gradient may be detrimental to their performance. Critical current density is a key factor affecting the performance of superconductors. However, the effect of thermal gradient on the critical current density has not been identified. Here, by combining the time-dependent Ginzburg–Landau equations and the heat transfer equation, the thermal gradient and magnetic field dependence of the critical current density are systematically investigated and rationalized by exploring the behavior of vortex and magnetization. For lower magnetic fields, it is found that the thermal gradients strongly reduce the local surface barriers, which inhibits vortex entry and movement, leading to a rapid deterioration of the current-carrying capability. Under moderate magnetic fields, the critical current density corresponding to higher thermal gradients decreases more slowly with increasing magnetic field, which results from the thermal gradient-induced entry and moving of vortices along the current direction. As the magnetic field continues to increase, the variation of the critical current density transitions into a platform period and even slightly rises. The enhanced critical current is primarily attributed to the excess entry of vortices, which increases the surface barrier of the sample. With the further increase in the magnetic field, the critical current density continues to decrease due to increased magnetic field penetration. These results unveil the fundamental interplay between thermal gradients, external magnetic field, vortex, magnetization and critical current density, and provide a theoretical basis for understanding the heat-induced quenching of mesoscopic superconducting thin films in practical applications.

Electrical Excitation and Detection of Chiral Magnons in a Compensated Ferrimagnetic Insulator.

Magnon chirality refers to the precessional handedness of magnetization around the external magnetic field, which is fixed as right-handed in ferromagnets. Compensated ferrimagnets accommodate parallel and antiparallel configurations of net magnetization and angular momentum, and thus serve as an ideal platform for studying magnon chirality. Through performing spin-torque ferromagnetic resonance experiments, we experimentally study the reversal of low-frequency magnon chirality across the magnetization and angular momentum compensation temperatures in a Gd_{3}Fe_{5}O_{12}/Pt bilayer. In particular, we demonstrate that dampinglike spin torque could sensitively excite and detect the reversal of low-frequency magnon chirality. By solving the coupled Landau-Lifshitz-Gilbert equations, the close correlation between the reversal of low-frequency magnon chirality and the sign of net angular momenta is established. The electrical excitation and detection of low-frequency magnon chirality in compensated ferrimagnetic insulators could be useful for building chiral spintronics.

Extreme electromagnetic rotation, chemical reaction, Hall and ion slip effects on weakly ionized fluid in a Riga channel

The utilization of external magnetic or electric fields, particularly through a Riga setup, markedly enhances flow dynamics by mitigating frictional forces and turbulent fluctuations, thereby facilitating superior flow management. Such improvements are especially beneficial in optimizing the operational efficiency of machinery and turbines. Our research focuses on the behaviour of a weakly ionized fluid within a porous, infinitely extended Riga channel (or electromagnetic channel) set in a rotational frame work affected by Hall and ion-slip electric fields. This model integrates the cumulative repulsions of an abruptly apply pressure gradients, electro-magnetic force, electromagnetic radiation, as well as chemical reactions. The physical configuration of the model features a stationary RHS wall as well as the LHS wall subjected to transversal vibration, establishing a complex flow environment. This circumstance is analytically modeled utilizing time dependent PDE, with the Laplace transform method applied to achieve a closed-format resolution for the course controlling equations. Through detailed graphical and tabular data, the investigations explored the impacts of assorted pivotal parameters on the model's flow traits and quantities. Our results indicate that an upswing in the modified Hartmann number significantly enhances fluids flow in the conduit, with the most important resultant flow showing marked improvement as Hall and ion-slip parameters amplify, and secondly the resultant flow diminishing chemical reaction parameter. Additionally, species concentration lowers with higher Schmidt numbers and chemical reaction rates, while an expanded modified Hartmann number correlate with enhanced shear stress near the conduit wall. Moreover, an elevation in the radiating parameter reduces the rate of temperature transport at the vibrating wall, whereas this at the stationary wall improves. This study has profound implications across several fields, notably in fusion energy research, spacecraft propulsion systems, satellite operations, aerospace engineering, and advanced manufacturing technologies.

Cobalt-based pyroxenes: A new playground for Kitaev physics

Recent advances in the study of cobaltites have unveiled their potential as a promising platform for realizing Kitaev physics in honeycomb systems and the Ising model in weakly coupled chain materials. In this manuscript, we explore the magnetic properties of pyroxene SrCoGe[Formula: see text]O[Formula: see text] using a combination of neutron scattering, ab initio methods, and linear spin-wave theory. Through careful examination of inelastic neutron scattering powder spectra, we propose a modified Kitaev model to accurately describe the twisted chains of edge-sharing octahedra surrounding Co[Formula: see text] ions. The extended Kitaev-Heisenberg model, including a significant anisotropic bond-dependent exchange term with [Formula: see text], is identified as the key descriptor of the magnetic interactions in SrCoGe[Formula: see text]O[Formula: see text]. Furthermore, our heat capacity measurements reveal an effect of an external magnetic field (approximately 13 T) which shifts the system from a fragile antiferromagnetic ordering with [Formula: see text] K to a field-induced state. We argue that pyroxenes, particularly those modified by substituting Ge with Si and its less extended [Formula: see text] orbitals, emerge as a platform for the Kitaev model. This opens up possibilities for advancing our understanding of Kitaev physics.

Characterizing the diffuse continuum excitations in the classical spin liquid h−YMnO3

We extend previous inelastic neutron scattering results on the geometrically frustrated antiferromagnet hexagonal-YMnO3, which has been suggested to belong to the class of classical spin liquids. We expand the energy transfer range of the diffuse signal up to 6.9 meV within a wide temperature range around the ordering temperature, TN. The two distinct diffuse signals in the a−b plane, the signal localized at Γ′ and the scattering intensity connecting Γ′ points over the M′, are shown to be only weakly energy dependent. In addition, an external magnetic field of up to 10.5 T applied along c is shown to have no effect on the diffuse signal. In the orthogonal scattering plane, the signals are shown to be dependent on l only through the magnetic form factor, showing that the correlations are purely two-dimensional, and supporting the origin of this to be the frustrated Mn3+ triangles. This result is corroborated by atomistic spin dynamics simulations showing similar scattering vector and temperature behaviors. Lastly, data for the spin wave scattering in the (h,0,l) plane allow for a discussion of the magnetic ground state where better agreement is found between the data and an ordered structure of the Γ1 or Γ3 symmetry, albeit crystal electric field arguments dismiss the Γ1 as a possibility. Published by the American Physical Society 2024

Study of structural, magnetic, and physical properties in nano cobalt ferrite by computational analysis

Using the DFT+U method, we investigated the structural, magnetic, electronic, mechanical, thermal, optical, thermoelectric, and thermodynamic properties of the CoFe2O4 system. The GGA approximation was employed to calculate the exchange–correlation potential. The CoFe2O4 has a metallic bond and is ductile, as determined by Poisson’s and Pugh’s ratio mathematical calculations. Transport properties such as the figure of merit, thermal (k/τ) and electrical (σ/τ) conductivities, power factor, and Seebeck coefficient were computed to explain the thermal behavior of this spinel. Additionally, optical parameters like energy loss L(ω), absorption coefficient α(ω), dielectric constants ε(ω), optical conductivity σ(ω), reflectivity R(ω), extinction coefficient k(ω), and refractive index n(ω) are investigated. Lastly, we study how the magnetic phase transitions, magnetization, critical temperature, and specific heat capacity of this material are affected by an external magnetic field at constant pressure. Around the critical temperature, magnetic entropy and relative cooling capacity for various external magnetic fields are obtained.

Smart Biopolymer Scaffolds Based on Hyaluronic Acid and Carbonyl Iron Microparticles: 3D Printing, Magneto-Responsive, and Cytotoxicity Study.

This study deals with utilization of the hyaluronic acid (HA) and carbonyl iron (CI) microparticles to fabricate the magneto-responsive hydrogel scaffolds that can provide triggered functionality upon application of an external magnetic field. The various combinations of the HA and CI were investigated from the rheological and viscoelastic point of view to clearly show promising behavior in connection to 3D printing. Furthermore, the swelling capabilities with water diffusion kinetics were also elucidated. Magneto-responsive performance of bulk hydrogels and their noncytotoxic nature were investigated,, and all hydrogels showed cell viability in the range 75-85%. The 3D printing of such developed systems was successful, and fundamental characterization of the scaffolds morphology (SEM and CT) has been presented. The magnetic activity of the final scaffolds was confirmed at a very low magnetic field strength of 140 kA/m, and such a scaffold also provides very good biocompatibility with NIH/3T3 fibroblasts.

Nonmonotonic Hall Effect of Weyl Semimetals under a Magnetic Field.

The Hall effect of topological quantum materials often reveals essential new physics and possesses potential for application. The magnetic Weyl semimetal is one especially interesting example that hosts an interplay between the spontaneous time-reversal symmetry-breaking topology and the external magnetic field. However, it is less known beyond the anomalous Hall effect thereof, which is unable to account for plenty of magnetotransport measurements. We propose a new Hall effect characteristically nonmonotonic with respect to the external field, intrinsic to the three-dimensional Weyl topology, and free from chemical potential fine-tuning. Two related mechanisms from the Landau level bending and chiral Landau level shifting are found, together with their relation to the Shubnikov-de Hass effect. This field-dependent Hall response, universal to thin films and bulk samples, provides a concrete physical picture for existing measurements and is promising to guide future experiments.

Short-Period Skyrmion Crystals in Itinerant Body-Centered Tetragonal Magnets

In this study, we investigate the stability of a magnetic skyrmion crystal with short-period magnetic modulations in a centrosymmetric body-centered tetragonal system. By performing the simulated annealing for the spin model, incorporating the effects of the biquadratic interaction and high-harmonic wave–vector interaction in momentum space, we find that the double-Q square skyrmion crystal consisting of two spin density waves is stabilized in an external magnetic field. We also show that double-Q states appear in both low- and high-field regions; the low-field spin configuration is characterized by an anisotropic double-Q modulation consisting of a superposition of the spiral wave and sinusoidal wave, while the high-field spin configuration is characterized by an isotropic double-Q modulation consisting of a superposition of two sinusoidal waves. Furthermore, we show that the obtained multiple-Q instabilities can be realized for various ordering wave vectors. The results provide the possibility of realizing the short-period skyrmion crystals under the body-centered tetragonal lattice structure.

CURRENT OSCILLATIONS IN IMPURITY SEMICONDUCTORS WITH BOTH SIGNS OF CURRENT CARRIERS IN THE PRESENCE OF AN EXTERNAL ELECTRIC FIELD, A TEMPERATURE GRADIENT AND A WEAK MAGNETIC FIELD (μ_± H<<C)

It is theoretically shown for the first time that in an external electric and weak magnetic fields, when there is a temperature gradient, an impurity semiconductor radiates energy from itself with a certain frequency. The values of the frequency of current oscillations and the limit of change of the external electric field are found. It is shown that the resistance in the medium has only ohmic character. It is stated that in the above semiconductor, when the concentration of electrons and holes are determined from the obtained expression in theory, the injection of contacts plays a major role for the appearance of the indicated current oscillation in the circuit.

Cyclotron resonance imaging at cryogenic temperatures enabled by electric field modification in a microwave cavity

Abstract Cyclotron resonance (CR) is a standard but emerging technique for investigating carrier properties of semiconductors. We have succeeded in CR measurements by employing a microwave cavity designed for electron paramagnetic resonance (EPR). Here, we demonstrate CR imaging to visualize the spatial distribution of carriers at cryogenic temperatures for the first time. To realize CR imaging, it is necessary to account for the electric field modification in the microwave cavity of a cylindrical TM110 mode, which is designed for EPR imaging and is inherently unsuitable for CR measurements. CR detection requires the oscillating electric field perpendicular to the external static magnetic field (B0) at the sample position, which is not designed for the unloaded cavity. It has been challenging to verify the electric field distribution inside the cavity experimentally, but we show that the observation of the CR signals provides evidence of modification in the electric field. Analysis of the electromagnetic field explains the results, revealing a field distribution whose strength and direction are perturbed due to the lensing effect by the inserted dielectric materials.

FIB-fabrication of superconducting devices based on Bi2Se3 junctions

Recent advances in quantum technologies are highly influencing the current technological scenario. Hybrid devices combining superconductors and topological insulators represent an excellent opportunity to study the topological superconducting phase, which offers interesting features that might have significant implications in the development of quantum sensing and quantum computing. Furthermore, focused ion beam techniques, whose versatility enables to create sophisticated devices with high degree of customization, can enhance the creation of complex devices. Here, we develop a novel approach for creating single-crystal devices that is applied to the fabrication of superconducting devices based on topological insulator Bi2Se3 in a geometry characteristic of a superconducting quantum interference device. Characterization of these devices reveals that superconductivity is induced in our crystal and the supercurrent is modulated by applying an external magnetic field. These results open the way to tailoring the response of hybrid devices that combine superconductors and topological insulators by focused ion beam techniques.

Double-Q Checkerboard Bubble Crystal in Centrosymmetric Tetragonal Magnets

We report our numerical studies on the emergence of a double-Q checkerboard bubble crystal in centrosymmetric tetragonal magnets. The double-Q checkerboard bubble crystal is characterized by a fourfold-symmetric collinear spin configuration consisting of a superposition of two sinusoidal waves with the out-of-plane spin modulations along the [110] and [1¯10] directions. The numerical calculations based on the simulated annealing for an effective spin model with the momentum-resolved easy-axis exchange interactions reveal that the double-Q checkerboard bubble crystal is energetically degenerate with the single-Q collinear state when the ordering wave vector lies on the quarter of the reciprocal lattice vector along the ⟨110⟩ direction. We show that such a degeneracy is lifted by considering the biquadratic interaction. We also find that the double-Q checkerboard bubble crystal turns into another double-Q state characterized by the in-plane spin modulations by increasing an external magnetic field.

4D printing of magnetoresponsive soft gripper and phenomenological approach for required magnetical actuation field

4D printing is the next step in additive manufacturing. Magnetoresponsive materials facilitate the creation of gripping tools through 4D printing, allowing for structural changes in response to external stimuli. In this study, the structural change is manifested as motion, triggered by an external magnetic field. This technology offers significant advantages in medical and industrial applications, including the printing of life-like moving organ models for medical training and the development of actuators for use in explosive environments. Magnetoresponsive materials are programmed with a magnetic profile and actuated by an external magnetic field. A compound of strontium ferrite microparticles SrFe12O19\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$SrFe_{12}O_{19}$$\\end{document}(≤20μm\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ \\le 20\\mu m$$\\end{document}) and an elastic polymer (thermoplastic copolyester) with a Hardness of Shore D 40 was produced. A star-shaped body was programmed and actuated by two permanent magnets, each of Br=1.29-1.32T\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$B_r=1.29 - 1.32T$$\\end{document}. As there is no analytical approach for calculating the required actuation flux density, one has been developed. The approach is verified experimentally by using a Hall probe. It is appropriate to set the field with a Helmholtz coil, despite the utilization of two permanent magnets. The use of a commercial fused filament fabrication printer for the processing of magnetoresponsive materials has been realized here for the first time. The main contributions are the short time constant (around ta=0.1s\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$t_a=0.1s$$\\end{document}) for actuation and the repeatability (around n=200\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$n=200$$\\end{document} actuation cycles) of the motion. The feasibility of multiple diverse reprogramming is a step forward in 4D printing. Hence, the post-print programming and the inhomogeneity of the field limit the ease of the presented method.

Integration of cadmium sulfide quantum dots with calcium alginate microbeads for dual-functional mercury (II) ion sensing and removal

Mercury contamination poses human health as well as ecosystem at significant risks. This study introduces a novel approach for the selective detection with removal of Hg2+ ions from aqueous media by developing a dual functional adsorbent that combines calcium alginate microbeads (FMCAB) with capped cadmium sulfide quantum dots (CdS QDs). CdS QDs immobilized on calcium alginate microbeads in magnetite facilitated efficient separation from the adsorption system under an external magnetic field. The fluorescence properties of CdS QDs remain largely unaffected before and after adsorption of Hg2+ ions on FMCAB, enabling selective monitoring of these ions. The adsorbent demonstrated a high adsorption capacity of around 160 μg/g and exhibited a quick and effective process. FMCAB evidenced selectivity over the other metal ions with limits of detection 12.9 μM. The results from this research pave the way for novel applications of FMCAB for heavy metal ions sensing probes and its removal.

In-situ growth of Fe-MOF on magnetic materials by self-template method to enhance practicality and removal of tetracycline antibiotics from aqueous solution

In this work, core–shell structured Fe3O4@PCN-333 (Fe) composite was constructed using a self-template method, in which Fe3O4 microspheres not only serve as magnetic centers but also provide Fe (III) for the preparation of PCN-333 (Fe). PCN-333 (Fe) uniformly grew as a shell on the surfaces of the microspheres, and the shell thickness was approximately 38 nm. The composite exhibited high adsorption performance, with maximum adsorption capacities of 471.7, 303.3 and 314.5 mg/g for chlortetracycline, tetracycline and oxytetracycline, respectively. The adsorption of tetracycline antibiotics (TCs) was based on the Langmuir and pseudo-second-order model, and external diffusion and pore diffusion were the rate-limiting steps in adsorption. The strong adsorption capacity was attributed to the mechanism of π–π interaction, coordination bonds, electrostatic interaction, hydrogen bonding, and van der Waals force. Fe3O4@PCN-333 (Fe) composite displayed good stability in the aqueous solution, strong TCs adsorption capacity, high selectivity, anti-interference performance for adsorbing TCs, fast recovery with external magnetic field, reusability, thus effectively reducing the cost for removing water pollutants. These features make the composite a potential material for removing TCs in the environment.

Magneto-electrochemical water splitting performance of graphene oxide/nickel aluminum-layered double hydroxide nanocomposites

Designing efficient, cheap catalysts for oxygen production is very important for water electrolysis and green hydrogen production. Here, synthesis and electrocatalytic performance of graphene oxide (GO)/nickel-aluminum layered double hydroxide (NiAl-LDH) composites were investigated for water-splitting applications. The composition, microstructure, and morphology of the nanocomposites were confirmed by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and field emission scanning electron microscopy (FE-SEM), and their water oxidation performance was examined in 0.1 M potassium hydroxide solution in the presence and absence of magnetic field. The results show that optimized GO/NiAl-LDH nanocomposite (GO-1 %/NiAl-LDH) exhibits the lowest overpotential compared with other prepared nanocomposites. This performance demonstrates comparable electroactivity to well-developed electrocatalysts like the perovskite-based electrodes, it also shows an improved electrocatalytic activity compared to NiAl-LDHs due to the presence of graphene oxide in the composite. We interpreted this significant performance to improve electron transform and high active site at the synthesized GO/NiAl-LDH composites. The best electrocatalytic activity with an overpotential of 443 and 473 mV at the current density 10 mA.cm−2 were evidenced for GO-1 %/NiAl-LDH nanocomposite in the presence and absence of external magnetic field, respectively. Furthermore, the tafel slope were reported about 54 and 162 mV.dec−1 in the presence and absence of magnetic field, respectively. This improved water oxidation can be attributed to the magneto-hydrodynamic effect and the increased number of metal sites on LDHs under the magnetic field.

A high-order finite-difference solver for direct numerical simulations of magnetohydrodynamic turbulence

This paper presents the development and validation of a Magnetohydrodynamics (MHD) module integrated into the Xcompact3d framework, an open-source high-order finite-difference suite of solvers designed to study turbulent flows on supercomputers. Leveraging the Fast Fourier Transform library already implemented in Xcompact3d, alongside sixth-order compact finite-difference schemes and a direct spectral Poisson solver, both the induction and potential-based MHD equations can be efficiently solved at scale on CPU-based supercomputers for fluids with strong and weak magnetic field, respectively. Validation of the MHD solver is conducted against established benchmarks, including Orszag-Tang vortex and MHD channel flows, demonstrating the module's capability to accurately capture complex MHD phenomena, providing a powerful tool for research in both engineering and astrophysics. The scalability of the Xcompact3d framework remains intact with the incorporation of the MHD module, ensuring efficient performance on modern high-performance clusters. This paper also presents new findings on the evolution of the Taylor-Green vortex under an external magnetic field for different flow regimes.

Physical Field Effects to Suppress Polysulfide Shuttling in Lithium-Sulfur Battery.

Lithium-sulfur batteries (LSB) with high theoretical energy density are plagued by the infamous shuttle effect of lithium polysulfide (LPS) and the sluggish sulfur reduction/evolution reaction. Extensive research is conducted on how to suppress shuttle effects, including physical structure confinement engineering, chemical adsorption strategy, and the design of sulfur redox catalysts. Recently, the rational design to mitigate shuttle effects and enhance reaction kinetics based on physical field effects has been widely studied, providing a more fundamental understanding of interactions with sulfur species. Herein, the physical field effect is focused and their methods and mechanisms of interaction are summarized systematically with LPS. Overall, the working principle of LSB system, the origin of the shuttle effect, and kinetic trouble in LSB are briefly described. Then, the mechanism and application of rational design of materials based on physical field effect concepts and the external physical field-assisted LSB are elaborated, including electrostatic force, built-in electric field, spin state regulation, strain engineering, external magnetic field, photoassisted and other physical field-assisted strategies are pivotally elaborated and discussed. Finally, the potential directions of physical field effects in enhancing the performance and weakening the shuttle effect of high-energy LSB are summarized and anticipated.

Quasi-two-dimensional pseudo-sessile drops

Sessile drops are ubiquitous and important in technological applications. While dynamics of liquid drops have been studied under confinement, the possibility of creating sessile drops with reduced dimensionality has not been explored. Here, we demonstrate a quasi-two-dimensional (Q2D) analogy for axisymmetric sessile three-dimensional (3D) drops. The Q2D drops are created by confining liquids between parallel vertical walls, forming low aspect ratio capillary bridges deformed by gravity. Stationary Q2D drops adopt projected shapes analogous to 3D sessile drops, ranging from circular drops to puddles. When moving, the Q2D drops exhibit capillary and fluid mechanical behaviours conceptually analogous to 3D drops, including impacts and sliding. The Q2D drops also exhibit more complex phenomena such as levitation, various instabilities and pattern formation when subjected to external electric, magnetic and flow fields. The 3D-Q2D analogy suggests that the diverse and often complicated phenomena observed in 3D drops can be studied in the simplified Q2D geometry. Additionally, the Q2D confinement analogy allows exploring phenomena arising from the reduced dimensionality and the altered boundary conditions.