External Cavity Research Articles

Electrical liquid crystal integration with VCSEL arrays for tunable orthogonal polarization laser

Vertical-cavity surface-emitting laser (VCSEL) arrays that can emit orthogonally polarized light have shown broad application potential and market demand in the fields of optical communication, optical sensors, and biomedicine. Two kinds of polarization-switching VCSEL arrays based on anti-parallel (AP) oriented liquid crystal (LC) external cavities and twisted nematic (TN) oriented LC external cavities are proposed in this paper. The light is independently guided by the LC electrically, achieving uniform lasing of linearly polarized light with mutually orthogonal polarization modes and equal power. The uniformity and polarization tunable ability of the lasing orthogonally polarized light power is guaranteed by the integration of the LC external cavity and the VCSEL array.

Optimal Design and Analysis of Wide-Band Near-Infrared Hybrid Dielectric Gratings with High Transmission Efficiency

Since surface relief transmission gratings have very strict requirements on operators and use environment, according to the semiconductor laser external cavity spectral beam combining system, this paper proposes a design scheme for a semiconductor laser array spectral beam combining system based on the grating-external cavity. The finite element approach was used to create a wideband, high-efficiency fill-in multilayer dielectric transmission grating structure for a high-power spectrum beam combining system. The incidence angle, ridge height, duty cycle, and sidewall inclination angle of the transmission grating were tuned and evaluated, and a link between the transmission grating’s diffraction efficiency and grating characteristics was discovered. The calculated design of the high-power fused silica transmission grating has a negative first-order peak diffraction efficiency of 99.5% in the 800 nm range. In the spectral region of 765–872 nm, the transmission grating’s diffraction effectiveness exceeds 92%. The filled ultra-high diffraction efficiency multilayer dielectric transmission grating design addresses the issue of resistance to high-power lasers under complicated operating settings. It is intended to maintain a high diffraction efficiency even after several cleaning cycles, and it is an ideal component for high-power spectrum beam combining systems.

Mode-hop-free synchronous tuning range extension of an uncoated external cavity diode laser based on PZT hysteresis characteristic compensation

Mode-hop-free synchronous tuning range extension of an uncoated external cavity diode laser based on PZT hysteresis characteristic compensation

Investigation of laser phase noise tolerance in simplified coherent PON with subcarrier multiplexing

In this paper, we experimentally investigate the laser phase noise tolerance for a 100 Gb/s/λ coherent passive optical network (PON) with simplified optical network units (ONUs) transceivers when distributed feedback (DFB) laser is used as the local oscillator (LO). In the proposed scheme, the digitally subcarrier-multiplexed (DSCM) signals are generated in the coherent transmitter at the optical line terminal (OLT) side based on Alamouti encoding in two polarizations and received by a single-polarization heterodyne receiver at the ONU side. The experimental results show that the power budget can achieve 34.2 dB and 33.9 dB after a 25 km standard single-mode fiber (SSMF) link when external cavity laser (ECL) and DFB lasers are used as the LOs at the ONU side. Polarization and carrier phase tracking schemes for the DSCM systems based on frequency domain pilot tones were used in digital signal process (DSP). At the same time, the frequency offset estimation and phase noise compensation algorithms are conducted using residual carriers. By choosing an appropriate width for the low-pass filter, the optimal performance for the phase noise compensation can be achieved. The pre-equalization operation at the OLT side is also verified for the subcarrier-multiplexed signals to provide better and flatter performances.

Sub-20 kHz low-frequency noise near ultraviolet butt-coupled fiber Bragg grating external cavity laser diode

We present a butt-coupled InGaN fiber Bragg grating (FBG) semiconductor laser diode operating below 400 nm in the single-mode emission regime. This compact coherent laser source exhibits an intrinsic linewidth of 14 kHz in the near-UV range and a side-mode suppression ratio reaching up to 40 dB accompanied by almost 2 mW output power. Furthermore, the properties of the FBG, including its central wavelength, bandwidth, and reflectivity, can be readily customized to fulfill specific requirements. As a result, the small footprint design of this laser is compatible with integration into a standard butterfly package to ease the lab-to-market technology transfer. The combination of low-frequency noise and fibered output signal positions these FBG laser systems as strong candidates for hybridization with integrated photonic platforms tailored for quantum information processing and metrology.

Numerical investigation of steering synchronization dynamics of laterally coupled laser array with monolithically-integrated external cold cavity

This study numerically explores the synchronization dynamics of a one-dimension edge-emitting laser array monolithically-integrated with an external cold cavity comprehensively, aiming to achieve an in-phase mode optical field. By employing the optical feedback rate equation, the impact of mutual feedback coefficient and coupling coefficient on the synchronization process are investigated thoroughly. The proposed external cold cavity, designed according to the Talbot effect, could significantly diminish the reflectivity of front facet through separated electrode structure, therefore facilitating the phase-locking process. Consequently, the study uncovers the effective regime for establishing in-phase mode operation. Additionally, the numerical analysis also reveals the vivid synchronization dynamic from a chaotic state to partially-phase-locked, then completely-phase-locked, and ultimately periodic oscillation. Furthermore, the impact of practical fabrication tolerances on the synchronization process are explored as well. Based on the simulation results, our work could offer valuable insights for steering the on-chip optical field and developing novel laser arrays with high beam quality.

Detecting optical frequency in weak signal light using injection-induced frequency modulation

In fiber-optic sensing, long-distance transmission and demodulation of weak signal light (SL) are critical. This study improves the system by relocating an external cavity tunable laser (ECTL) to the transmission end. Directly injecting the SL into the ECTL modulates the output light and uses the high-power ECTL light for transmission, reducing loss. At the demodulation end, an orthogonal Mach-Zehnder interferometer (MZI) and an H13C14N gas absorption cell (GAC) extract SL wavelength information. Results demonstrate effective modulation with SL intensity as low as 1 nW and a demodulation resolution of up to 10 MHz, offering significant improvements in long-distance fiber-optic sensing.

Dual-module combination with littman crosstalk external cavity for narrow-linewidth blue diode laser

The dense spectral beam combination is vital for achieving high power and brightness output in diode lasers. High-power narrow-linewidth laser modules have been widely studied as the fundamental units. This study presents a dual-module shared external cavity linewidth compression structure with a transmission diffraction grating. With a driving current of 2.4 A and a cooling temperature of 20 °C, the blue diode laser’s external cavity achieved an output power of 49.8 W, a spectral linewidth of 0.321 nm, and a tuning range of 0.817 nm, with an external cavity spectrum locked efficiency of approximately 80.6 %. Additionally, it is observed that crosstalk has a significant influence on the linewidth of the two modules. When one module current locked at 2.4 A and the other increased from 0 A to 2.4 A, the linewidth was reduced from 0.377 nm to 0.321 nm, and linewidth locking was implemented over an output power range from 27 W to 49.8 W. This work reports the highest output power for a blue diode narrow-linewidth external cavity laser.

Stress Distribution of External Resorption Cavities with Different Materials

Stress Distribution of External Resorption Cavities with Different Materials

A novel phosphate detection sensor: From FTIR to EC-QCL

Excessive discharges of industrial and domestic sewage containing high concentrations of phosphorus are causing damage to the environment, so the detection of these pollutants in bodies of water is extremely critical. External cavity quantum cascade laser (EC-QCL) spectroscopy is a novel measurement technology that surpasses conventional infrared spectroscopy techniques. In this research, we propose a transmission detection system with a long optical path based on an EC-QCL for the detection of phosphate concentration in water bodies. Linear regression models were established based on this detection system, with all determination coefficients higher than 0.98 and a minimum detection limit smaller than 5.1 ppm. Additionally, the high-power spectral density of the EC-QCL permits the construction of a model using the raw radiation intensity data, as opposed to the conventional technique which depends on a reference background. The results show that the overall performance of the model based on the raw radiation intensity is similar to that of the model based on absorbance data. The EC-QCL detection system proposed in this study can ensure accuracy in the detection of pollutants, and the advantage of miniaturization provides a novel idea for the following development of portable phosphate in-situ sewage detection sensors.

Strong Laser Emission Modulation by Coherent Perfect Absorption Inside Complex-Coupled Distributed Feedback Laser Diodes.

The proof-of-concept of the exploitation of Coherent Perfect Absorption (CPA) in electrically-injected distributed-feedback laser sources is reported. Capitalizing on the essence of CPA as "light extinction by light", an integrated laser-modulator scheme emerges. The key ingredient compared to conventional single-frequency laser diodes is a careful periodic in-phase modulation of both real and imaginary parts of the complex grating index profile that enables both single-frequency operation and 40dB line purity at the Bragg frequency. It is shown that this combination is most apt for the operation of CPA as a modulation mechanism that respects the laser spectral purity. The specific proof-of-concept is based on an ultra-short external cavity formed by a metallic micro-mirror, whose role is to generate the second beam of more conventional CPA interferometric approaches. The implemented complex-coupled grating is compatible with existing industrial technologies and promising for real-life laser source applications. Furthermore, the concept can be directly transferred to other material platforms and other wavelengths ranging from terahertz to ultraviolet.

External cavity quantum cascade laser with bias assisted tuning

External cavity quantum cascade laser with bias assisted tuning

300-nm-thick, ultralow-loss silicon nitride photonic integrated circuits by 8-in. foundry production

Silicon nitride (Si3N4) photonic integrated circuits are rapidly developing in recent decades. The low loss of Si3N4 attracts significant attention and facilitates a wide range of applications in integrated photonics. In this work, we demonstrate the foundry fabrication of a 300-nm-thick 8-in. wafer-scale Si3N4 platform, with a microresonator intrinsic quality factor of up to 15×106, corresponding to an ultralow loss of 2.2 dB/m. Leveraging this platform, we develop a mature process design kit, achieving a single-mode waveguide propagation loss of less than 5 dB/m, an edge coupler loss of 1.3 dB, and an insertion loss of 0.07 dB for multimode interference couplers. Utilizing the processed Si3N4 chip, we realize a hybrid integrated tunable external cavity laser with a tuning range from 1534 to 1602 nm, a record-high side-mode suppression ratio of up to 76 dB, an optical power of 26 mW, and an intrinsic linewidth of down to 314 Hz. Our work lays a solid foundation for the further development of applications, including nonlinear optics, quantum optics, optical communications, and ranging.

Recent Progresses on Hybrid Lithium Niobate External Cavity Semiconductor Lasers.

Thin film lithium niobate (TFLN) has become a promising material platform for large scale photonic integrated circuits (PICs). As an indispensable component in PICs, on-chip electrically tunable narrow-linewidth lasers have attracted widespread attention in recent years due to their significant applications in high-speed optical communication, coherent detection, precision metrology, laser cooling, coherent transmission systems, light detection and ranging (LiDAR). However, research on electrically driven, high-power, and narrow-linewidth laser sources on TFLN platforms is still in its infancy. This review summarizes the recent progress on the narrow-linewidth compact laser sources boosted by hybrid TFLN/III-V semiconductor integration techniques, which will offer an alternative solution for on-chip high performance lasers for the future TFLN PIC industry and cutting-edge sciences. The review begins with a brief introduction of the current status of compact external cavity semiconductor lasers (ECSLs) and recently developed TFLN photonics. The following section presents various ECSLs based on TFLN photonic chips with different photonic structures to construct external cavity for on-chip optical feedback. Some conclusions and future perspectives are provided.

Integrated Light Sources Based on Micro‐Ring Resonators for Chip‐Based LiDAR

AbstractThe micro‐ring resonator (MRR) is a crucial element in integrated photonics. It allows for the realization of various optical devices, including integrated filters, modulators, micro‐ring laser cavities, detectors, optical logic switches, and nonlinear optical devices. The development of integrated photonics has enabled the integration of these devices with other components into a photonic chip to perform specific functions. For instance, widely tunable MRR‐based lasers have been integrated with optical phased arrays (OPAs), detectors, and other elements to form a fully integrated LiDAR engine. Advances in nanofabrication have facilitated the miniaturization of nanophotonic phased arrays and on‐chip lasers. MRR‐based integrated external cavity lasers (ECLs) and integrated optical frequency combs (OFCs) have significantly enhanced the scanning and detection capabilities of LiDAR recently. Additionally, their size and power consumption have been continuously reduced, rendering them suitable for chip‐scale integration. This paper systematically reviews the major advancements of MRR‐based integrated lasers for chip‐scale LiDAR.

Twisted-mode VECSEL with intracavity second harmonic generation

A vertical external cavity surface emitting laser (VECSEL) that uses intracavity second harmonic generation (SHG) and the twisted mode technique for power scaling was explored. The effects of the twisted mode technique are shown and discussed by examining the mode structure and spectrum of the fundamental mode. The maximum SHG output was 1 W at 458 nm while the fundamental was lasing in the TEM00 mode. We conclude that the twisted mode technique does not interfere with intracavity SHG and is a reasonable path for power scaling intracavity frequency doubled VECSELs.

Phase signal analysis for high-sensitive temperature fiber-optic external Fabry-Perot-cavity sensor

We experimentally demonstrate a highly temperature-sensitive external Fabry-Perot cavity. The interferometric structure is composed of an air-microcavity; its fabrication uses a microcapillary and UV polymer. A temperature sensitivity close to 5.7 nm/ºC is achieved with suitable linearity (0.9896) and minimal hysteresis; a phase analysis technique is proposed and applied to overcome the trade-off between sensitivity and range of operation. This technique provides a competitive sensitivity (0.84 rad/ºC), good linearity (0.9934), and a range of operation from 25 °C to 41 °C.

High-power diode laser spectrally narrowed with prism-etalon feedback.

A simple method for reducing the linewidth of a diode laser while maintaining high output power is described. It is based on a dispersive prism and a thin etalon for retroreflective feedback. The etalon creates two weak external cavities that provide spectral selectivity that is periodic with a period equal to the etalon's free spectral range. The method was applied to a multimode blue laser diode, which in the absence of feedback features a linewidth of several nanometers. The spectral properties of the laser were investigated for different etalon thicknesses and operating currents and tested in the presence of temperature fluctuations. With a SF11 equilateral uncoated prism near Brewster's angle and a 0.3 mm-thick uncoated fused silica etalon, the linewidth was reduced 20-fold to 70pm (3.6 cm-1) with an output power of 3W at a current of 2.15A. The largest diode current probed was 2.75A, which resulted in a linewidth of 100pm (5.1 cm-1) and an output power of 4W. In contrast to the use of, for example, a volume Bragg grating, a high degree of flexibility is afforded as the same prism-etalon pair can be used across the visible and near infrared.

Laser absorption spectroscopy based on dual-convolutional neural network algorithms for multiple trace gases analysis

Methane (CH4) and nitrous oxide (N2O) as two typical greenhouse gases, have important effects on global climate change. In this paper, an external cavity quantum cascade laser (ECQCL) based gas sensor was developed for simultaneous CH4 and N2O detection by employing calibration-free direct absorption spectroscopy. In view of the important influence of spectral noise and background normalization process on gas concentration inversion, dual-convolutional neural networks (D-CNN) and baseline normalization algorithms were developed for spectral signal de-noising and concentration inversion, respectively. Compared to traditional methods, the results indicate that the proposed D-CNN de-noising algorithm can successfully improve the signal-to-noise ratio (SNR) by 2.37 times, and the correlation coefficients of the retrieved concentrations were improved from 0.9965 to 0.9991 for CH4 and 0.9983 to 0.9994 for N2O, respectively, which shows a great potential for analyzing unresolved mixture absorption spectra with high-precision and accuracy in simultaneous detection of multiple gas components.

Recent improvements in the novel approach to the fast detection of surface contaminations

Here, we present the idea behind a novel measurement system and the recent improvements in detecting surface contaminations using a tunable, very fast three-core quantum cascade laser (QCL) system. It is developed as a potential replacement for the old established double-wheel sampling system currently used to detect surface threats caused by hazardous, non-volatile chemical substances. The novel system design is based on an optical measurement principle, allowing standoff detection and identification, thus rendering ground contact unnecessary. One of the leading military requirements for a CBRN reconnaissance vehicle is a high marching speed; hence, this new system is designed to have an ultra-short acquisition time and an adequate spectral bandwidth for measurements in the mid-infrared (MIR). This innovative approach may replace the more cumbersome indirect detection techniques. We discuss the main advantages and evaluate possible application scenarios that we expect from this setup. Active IR backscatter spectroscopy generally permits the contactless identification of hazardous chemical substances on surfaces. Here, the design was optimized around an approximate measuring distance of decimeters. Using a monoaxial setup, the autofocus is less demanding than alternative approaches and even allows for rapid measurements of rough surfaces. We built the improved measurement system based on novel QCL modules that integrate micro-opto-electro-mechanical grating scanners (MOEMS) in an external cavity. These elaborate laser modules provide almost one kilohertz (kHz) spectral scan speeds and typically cover a spectral range of 200–300 cm-1, respectively. Furthermore, such modules achieve measurement times of as short as one millisecond per spectrum. The full spectral coverage of the system is realized by coupling several of such modules.