Extensive Hydrogen-bonding Network Research Articles

Crystal structure of β-d-galactofuranosidase from Streptomyces sp. JHA19 in complex with an inhibitor provides insights into substrate specificity.

d-Galactofuranose (Galf) is widely distributed in glycoconjugates of pathogenic microbes. β-d-Galactofuranosidase (Galf-ase) from Streptomyces sp. JHA19 (ORF1110) belongs to glycoside hydrolase (GH) family 2 and is the first identified Galf-specific degradation enzyme. Here, the crystal structure of ORF1110 in complex with a mechanism-based potent inhibitor, d-iminogalactitol (Ki = 65 μm) was solved. ORF1110 binds to the C5-C6 hydroxy groups of d-iminogalactitol with an extensive and integral hydrogen bond network, a key interaction that discriminates the substrates. The active site structure of ORF1110 is largely different from those of β-glucuronidases and β-galactosidases in the same GH2 family. A C-terminal domain of ORF1110 is predicted to be a carbohydrate-binding module family 42 that may bind Galf. The structural insights into Galf-ase will contribute to the investigation of therapeutic tools against pathogens.

Water-soluble neutral octahedral chalcogenide tungsten and molybdenum {M6Q8} clusters with P(C2H4CONH2)3 ligand

Developing the chemistry of octahedral chalcogenide molybdenum and tungsten cluster complexes in the context of applications in biology and medicine, in this work a series of water-soluble neutral cluster complexes [{M6Q8}(P(C2H4CONH2)3)6] (M = Mo, W; Q = S, Se) have been obtained by simultaneous replacement of inner and terminal halide ligands in [{M6I8}I6]2− with chalcogenide and organic phosphine ligands and characterized by single-crystal X-ray diffraction analysis, 1H and 31P NMR spectroscopies, elemental analysis, and UV–vis spectroscopy. The amide groups of the organic ligands, on the one hand, contribute to the solubility of the resulting clusters in water and, on the other hand, are able to form an extensive network of hydrogen bonds, leading to the crystallization of the complexes from aqueous solutions. Despite this fact, the complexes have sufficient solubility and stability in aqueous solutions, which made it possible to demonstrate their low cytotoxicity on Hep-2 cells (IC50 were not reached even at concentration up to 4 mM). The resulting clusters are among the most biocompatible of the octahedral clusters studied to date and are the starting point for the development of a new family of X-ray contrast agents.

Atomistic insights into the reentrant phase-transitions in polyuracil and polylysine mixtures.

The phase separation of protein and RNA mixtures underpins the assembly and regulation of numerous membraneless organelles in cells. The ubiquity of protein-RNA condensates in cellular regulatory processes is in part due to their sensitivity to RNA concentration, which affects their physical properties and stability. Recent experiments with poly-cationic peptide-RNA mixtures have revealed closed-loop phase diagrams featuring lower and upper critical solution temperatures. These diagrams indicate reentrant phase transitions shaped by biomolecular interactions and entropic forces such as solvent and ion reorganization. We employed atomistic simulations to study mixtures with various RNA-polylysine stoichiometries and temperatures to elucidate the microscopic driving forces behind reentrant phase transitions in protein-RNA mixtures. Our findings reveal an intricate interplay between hydration, ion condensation, and specific RNA-polylysine hydrogen bonding, resulting in distinct stoichiometry-dependent phase equilibria governing stabilities and structures of the condensate phase. Our simulations show that reentrant transitions are accompanied by desolvation around the phosphate groups of RNA, with increased contacts between phosphate and lysine side chains. In RNA-rich systems at lower temperatures, RNA molecules can form an extensive pi-stacking and hydrogen bond network, leading to percolation. In protein-rich systems, no such percolation-induced transitions are observed. Furthermore, we assessed the performance of three prominent water force fields-Optimal Point Charge (OPC), TIP4P-2005, and TIP4P-D-in capturing reentrant phase transitions. OPC provided a superior balance of interactions, enabling effective capture of reentrant transitions and accurate characterization of changes in solvent reorganization. This study offers atomistic insights into the nature of reentrant phase transitions using simple model peptide and nucleotide mixtures. We believe that our results are broadly applicable to larger classes of peptide-RNA mixtures exhibiting reentrant phase transitions.

Phosphoric acid pre-swelling strategy constructing acid-doped fluoropoly(aryl pyridinium) membranes to enable high-performance vanadium flow batteries

Vanadium flow batteries (VFBs) have promising applications for grid-scale energy storage. Unfortunately, the widespread integration of VFBs into large-scale energy storage applications is hindered by the lack of low-cost ion-conducting membranes (ICMs) with high ion selectivity and excellent stability. Herein, we propose an intrinsically stabilized ether-free fluoropoly(aryl pyridine) (PFNP) and provide a high-performance acid-doped membrane via a phosphoric acid pre-swelling strategy for the battery. Effective acid-doping enables the formation of discrete hydrophilic nano-channels within the PFNP matrix, and the extensive internal hydrogen-bonding network synergistically facilitates charge carrier transport. Simultaneously, the close stacking of PFNP chains and the Donnan effect of protonated piperidinium groups within the membrane effectively prevent vanadium ions permeation. Consequently, this innovative strategy allows the acid-doped membrane to achieve nearly perfect ion selectivity (3.64 × 105 S min cm−3), outperforming the Nafion 212 membrane (3.01 × 104 S min cm−3). Moreover, the fluorinated ether-free structure and non-weak-bondpyridine structure impart excellent mechanical and chemical stability to the acid-doped membrane, ensuring long-term membrane operation. As expected, the VFBs assembled with the acid-doped membrane achieve high energy efficiency (83.1 %) at high current density (200 mA cm−2), offer an ultra-low capacity decay rate of 0.08 % per cycle and retain outstanding stability after 1500 cycles at 120 mA cm−2. This study provides a potential material system for commercial VFB membranes by achieving high performance at low cost.

Crystal structures of the isomeric dipeptides l-glycyl-l-me-thio-nine and l-me-thionyl-l-glycine.

The oxidation of me-thionyl peptides can contribute to increased biological (oxidative) stress and development of various inflammatory diseases. The conformation of peptides has an important role in the mechanism of oxidation and the inter-mediates formed in the reaction. Herein, the crystal structures of the isomeric dipeptides Gly-Met (Gly = glycine and Met = me-thio-nine) and Met-Gly, both C7H14N2O3S, are reported. Both mol-ecules exist in the solid state as zwitterions with nominal proton transfer from the carb-oxy-lic acid to the primary amine group. The Gly-Met mol-ecule has an extended backbone structure, while Met-Gly has two nearly planar regions kinked at the C atom bearing the NH3 group. In the crystals, both structures form extensive three-dimensional hydrogen-bonding networks via N-H⋯O and bifurcated N-H⋯(O,O) hydrogen bonds having N⋯O distances in the range 2.6619 (13)-2.8513 (13) Å for Gly-Met and 2.6273 (8)-3.1465 (8) Å for Met-Gly.

Design of a water-soluble transmembrane receptor kinase with intact molecular function by QTY code

Membrane proteins are critical to biological processes and central to life sciences and modern medicine. However, membrane proteins are notoriously challenging to study, mainly owing to difficulties dictated by their highly hydrophobic nature. Previously, we reported QTY code, which is a simple method for designing water-soluble membrane proteins. Here, we apply QTY code to a transmembrane receptor, histidine kinase CpxA, to render it completely water-soluble. The designed CpxAQTY exhibits expected biophysical properties and highly preserved native molecular function, including the activities of (i) autokinase, (ii) phosphotransferase, (iii) phosphatase, and (iv) signaling receptor, involving a water-solubilized transmembrane domain. We probe the principles underlying the balance of structural stability and activity in the water-solubilized transmembrane domain. Computational approaches suggest that an extensive and dynamic hydrogen-bond network introduced by QTY code and its flexibility may play an important role. Our successful functional preservation further substantiates the robustness and comprehensiveness of QTY code.

1H/17O Chemical Shift Waves in Carboxyl-Bridged Hydrogen Bond Networks in Organic Solids.

We report solid-state 1H and 17O NMR results for four 17O-labeled organic compounds each containing an extensive carboxyl-bridged hydrogen bond (CBHB) network in the crystal lattice: tetrabutylammonium hydrogen di-[17O2]salicylate (1), [17O4]quinolinic acid (2), [17O4]dinicotinic acid (3), and [17O2]Gly/[17O2]Gly·HCl cocrystal (4). The 1H isotropic chemical shifts found for protons involved in different CBHB networks are between 8.2 and 20.5 ppm, which reflect very different hydrogen-bonding environments. Similarly, the 17O isotropic chemical shifts found for the carboxylate oxygen atoms in CBHB networks, spanning a large range between 166 and 341 ppm, are also remarkably sensitive to the hydrogen-bonding environments. We introduced a simple graphical representation in which 1H and 17O chemical shifts are displayed along the H and O atomic chains that form the CBHB network. In such a depiction, because wavy patterns are often observed, we refer to these wavy patterns as 1H/17O chemical shift waves. Typical patterns of 1H/17O chemical shift waves in CBHB networks are discussed. The reported 1H and 17O NMR parameters for the CBHB network models examined in this study can serve as benchmarks to aid in spectral interpretation for CBHB networks in proteins.

Cellulose nanofiber-connected covalent organic framework nanosheets composite membrane for proton conduction

Covalent organic framework (COF) nanosheets have been considered as promising materials for proton exchange membranes (PEM) due to their orderly, adjustable pores and relatively improved membrane forming properties. Here, we introduced the one-dimensional sulfonated bacterial cellulose nanofibers (SBCNF), originating from coconut and binding TpBd-2SO3H nanosheets to prepare a series of SBCNF/TpBd-2SO3H composite membranes. The composite membranes present a typical layered structure due to the presence of SBCNF. Moreover, extensive hydrogen bond network is formed between the embedded TpBd-2SO3H nanosheets and SBCNF, which is beneficial for improving the proton conductivity and mechanical strength of the membrane. As a result, the composite membrane achieved a proton conductivity of 147.5 mS/cm at 80 °C, 100 %RH and a highest tensile strength of 88.49 MPa.

Bioinspired Water Preorganization in Confined Space for Efficient Water Oxidation Catalysis in Metallosupramolecular Ruthenium Architectures.

ConspectusNature has established a sustainable way to maintain aerobic life on earth by inventing one of the most sophisticated biological processes, namely, natural photosynthesis, which delivers us with organic matter and molecular oxygen derived from the two abundant resources sunlight and water. The thermodynamically demanding photosynthetic water splitting is catalyzed by the oxygen-evolving complex in photosystem II (OEC-PSII), which comprises a distorted tetramanganese-calcium cluster (CaMn4O5) as catalytic core. As an ubiquitous concept for fine-tuning and regulating the reactivity of the active site of metalloenzymes, the surrounding protein domain creates a sophisticated environment that promotes substrate preorganization through secondary, noncovalent interactions such as hydrogen bonding or electrostatic interactions. Based on the high-resolution X-ray structure of PSII, several water channels were identified near the active site, which are filled with extensive hydrogen-bonding networks of preorganized water molecules, connecting the OEC with the protein surface. As an integral part of the outer coordination sphere of natural metalloenzymes, these channels control the substrate and product delivery, carefully regulate the proton flow by promoting pivotal proton-coupled electron transfer processes, and simultaneously stabilize short-lived oxidized intermediates, thus highlighting the importance of an ordered water network for the remarkable efficiency of the natural OEC.Transferring this concept from nature to the engineering of artificial metal catalysts for fuel production has fostered the fascinating field of metallosupramolecular chemistry by generating defined cavities that conceptually mimic enzymatic pockets. However, the application of supramolecular approaches to generate artificial water oxidation catalysts remained scarce prior to our initial reports, since such molecular design strategies for efficient activation of substrate water molecules in confined nanoenvironments were lacking. In this Account, we describe our research efforts on combining the state-of-the art Ru(bda) catalytic framework with structurally programmed ditopic ligands to guide the water oxidation process in defined metallosupramolecular assemblies in spatial proximity. We will elucidate the governing factors that control the quality of hydrogen-bonding water networks in multinuclear cavities of varying sizes and geometries to obtain high-performance, state-of-the-art water oxidation catalysts. Pushing the boundaries of artificial catalyst design, embedding a single catalytic Ru center into a well-defined molecular pocket enabled sophisticated water preorganization in front of the active site through an encoded basic recognition site, resulting in high catalytic rates comparable to those of the natural counterpart OEC-PSII.To fully explore their potential for solar fuel devices, the suitability of our metallosupramolecular assemblies was demonstrated under (electro)chemical and photocatalytic water oxidation conditions. In addition, testing the limits of structural diversity allowed the fabrication of self-assembled linear coordination oligomers as novel photocatalytic materials and long-range ordered covalent organic framework (COF) materials as recyclable and long-term stable solid-state materials for future applications.

A water structure indicator suitable for generic contexts: Two-liquid behavior at hydration and nanoconfinement conditions and a molecular approach to hydrophobicity and wetting.

In a recent work, we have briefly introduced a new structural index for water that, unlike previous indicators, was devised specifically for generic contexts beyond bulk conditions, making it suitable for hydration and nanoconfinement settings. In this work, we shall study this metric in detail, demonstrating its ability to reveal the existence of a fine-tuned interplay between the local structure and energetics in liquid water. This molecular principle enables the establishment of an extended hydrogen bond network, while simultaneously allowing for the existence of network defects by compensating for uncoordinated sites. By studying different water models and different temperatures encompassing both the normal liquid and the supercooled regime, this molecular mechanism will be shown to underlie the two-state behavior of bulk water. In addition, by studying functionalized self-assembled monolayers and diverse graphene-like surfaces, we shall show that this principle is also operative at hydration and nanoconfinement conditions, thus generalizing the validity of the two-liquid scenario of water to these contexts. This approach will allow us to define conditions for wettability, providing an accurate measure of hydrophobicity and a reliable predictor of filling and drying transitions. Hence, it might open the possibility of elucidating the active role of water in the broad fields of biophysics and materials science. As a preliminary step, we shall study the hydration structure and hydrophilicity of graphene-like systems (parallel graphene sheets and carbon nanotubes) as a function of the confinement dimensionality.

Potential antiprostatic performance of novel lanthanide-complexes based on 5-nitropicolinic acid

Two new lanthanide-complexes based on the 5-nitropicolinate ligand (5-npic) were obtained and fully characterized. Single-crystal X-ray diffraction revealed that these compounds are isostructural to a Dy-complex, previously published by us, based on dinuclear monomers link together with an extended hydrogen bond network, providing a final chemical formula of [Ln2(5-npic)6(H2O)4]·(H2O)2, where Ln = Dy (1), Gd (2), and Tb (3). Preliminary photoluminescent studies exhibited a ligand-centered emission for all complexes. The potential antitumoral activity of these materials was assayed in a prostatic cancer cell line (PC-3; the 2nd most common male cancerous disease), showing a significant anticancer activity (50–60% at 500 μg·mL−1). In turn, a high biocompatibility by both, the complexes and their precursors in human immunological HL-60 cells, was evidenced. In view of the strongest toxic effect in the tumoral cell line provided by the free 5-npic ligand (~ 40–50%), the overall anticancer complex performance seems to be triggered by the presence of this molecule.Graphical

A facile strategy for preparing of cross‐linkable natural fibers based on a Schiff base reaction

AbstractThe exploitation and utilization of natural fibers still face many challenges due to their high crystallinity and extensive hydrogen bond network. Therefore, sustainable and effective modification strategies are currently essential. In this work, we investigate the processing and mechanical performances of natural fibers modified by combining sodium periodate oxidation and subsequent Schiff base reaction. Steam‐exploded hemp fibers (HFs) were firstly oxidized with sodium periodate, and subsequently grafted with 1,10‐diaminodecane. A decrease in the glass transition temperature of oxidized‐aminated HFs (OAHFs) from 225 to 150°C was achieved as the dosage of periodate increased. Admirable mechanical properties were achieved despite a lower dosage of periodate due to melt bonding and chemical cross‐linking between the fibers during heat processing. Particularly, dynamic compression molding was applied to heat processes and effectively improved the melt bonding and the chemical crosslinking, which increased flexural strength from 58.2 to 69.9 MPa. This strategy was moderate and low cost. The resulted material has good processing performance and excellent mechanical properties, which have large industrial application prospects and potential in the field of biodegradable environment‐friendly materials.

HSV-1 ICP0 dimer domain adopts a novel β-barrel fold.

Infected cell protein 0 (ICP0) is an immediate-early regulatory protein of herpes simplex virus 1 (HSV-1) that possesses E3 ubiquitin ligase activity. ICP0 transactivates viral genes, in part, through its C-terminal dimer domain (residues 555-767). Deletion of this dimer domain results in reduced viral gene expression, lytic infection, and reactivation from latency. Since ICP0's dimer domain is associated with its transactivation activity and efficient viral replication, we wanted to determine the structure of this specific domain. The C-terminus of ICP0 was purified from bacteria and analyzed by X-ray crystallography to solve its structure. Each subunit or monomer in the ICP0 dimer is composed of nine β-strands and two α-helices. Interestingly, two adjacent β-strands from one monomer "reach" into the adjacent subunit during dimer formation, generating two β-barrel-like structures. Additionally, crystallographic analyses indicate a tetramer structure is formed from two β-strands of each dimer, creating a "stacking" of the β-barrels. The structural protein database searches indicate the fold or structure adopted by the ICP0 dimer is novel. The dimer is held together by an extensive network of hydrogen bonds. Computational analyses reveal that ICP0 can either form a dimer or bind to SUMO1 via its C-terminal SUMO-interacting motifs but not both. Understanding the structure of the dimer domain will provide insights into the activities of ICP0 and, ultimately, the HSV-1 life cycle.

Cucurbit[8]uril Binds Nonterminal Dipeptide Sites with High Affinity and Induces a Type II β-Turn.

In an effort to target polypeptides at nonterminal sites, we screened the binding of the synthetic receptor cucurbit[8]uril (Q8) to a small library of tetrapeptides, each containing a nonterminal dipeptide binding site. The resulting leads were characterized in detail using a combination of isothermal titration calorimetry, 1H NMR spectroscopy, electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS), and X-ray crystallography. The equilibrium dissociation constant values determined for the binding of Q8 to nonterminal dipeptide sites Lys-Phe (KF) and Phe-Lys (FK) were 60 and 86 nm, respectively. These are to the best of our knowledge the highest affinities reported to date for any synthetic receptor targeting a nonterminal site on an unmodified peptide. A 0.79 Å resolution crystal structure was obtained for the complex of Q8 with the peptide Gly-Gly-Leu-Tyr-Gly-Gly-Gly (GGLYGGG) and reveals structural details of the pair-inclusion motif. The molecular basis for recognition is established to be the inclusion of the side chains of Leu and Tyr residues, as well as an extensive network of hydrogen bonds between the peptide backbone, the carbonyl oxygens of Q8, and proximal water molecules. In addition, the crystal structure reveals that Q8 induces a type II β-turn. The sequence-selectivity, high affinity, reversibility, and detailed structural characterization of this system should facilitate the development of applications involving ligand-induced polypeptide folding.

Transformation of Diffusion and Local Structure of CH4 , CO2 , SO2 and H2 O Mixtures in Graphene Under Wide Temperature and Pressure Range: A Molecular Dynamics Simulation Study.

As a material with high specific surface area and excellent chemical stability, graphene exhibited remarkable adsorption and separation performance as well as a wide range of potential applications. The graphene layer played a significant role in influencing gas transmission. In this study, we employed molecular dynamics simulation to investigate the diffusion characteristics and local structures of a mixed system consisting of CH4 , CO2 , SO2 and H2 O. Additionally, we further examined the transformation of the behavior of these mixtures within graphene layers. The order of diffusion coefficients of the four molecules without graphene was H2 O>SO2 >CO2 ≫CH4 . However, in the double-layer graphene, the order changed to CH4 >CO2 ≫H2 O>SO2 . Higher temperatures and lower pressures were found to facilitate gas diffusion. Temperature and pressure had great effects on the local structures of CH4 , CO2 and SO2 , while their impact on H2 O was limited due to the extensive network of hydrogen bonds formed by H2 O molecules. The statistical results of average coordination number revealed that CH4 tended to aggregate with itself, whereas CO2 and SO2 exhibited a tendency to aggregate with H2 O. The graphene structure enhanced the separation and transportation of CH4 from mixed systems.

Beyond the coupled distortion model: structural analysis of the single domain cupredoxin AcoP, a green mononuclear copper centre with original features.

Cupredoxins are widely occurring copper-binding proteins with a typical Greek-key beta barrel fold. They are generally described as electron carriers that rely on a T1 copper centre coordinated by four ligands provided by the folded polypeptide. The discovery of novel cupredoxins demonstrates the high diversity of this family, with variations in terms of copper-binding ligands, copper centre geometry, redox potential, as well as biological function. AcoP is a periplasmic cupredoxin belonging to the iron respiratory chain of the acidophilic bacterium Acidithiobacillus ferrooxidans. AcoP presents original features, including high resistance to acidic pH and a constrained green-type copper centre of high redox potential. To understand the unique properties of AcoP, we undertook structural and biophysical characterization of wild-type AcoP and of two Cu-ligand mutants (H166A and M171A). The crystallographic structures, including native reduced AcoP at 1.65 Å resolution, unveil a typical cupredoxin fold. The presence of extended loops, never observed in previously characterized cupredoxins, might account for the interaction of AcoP with physiological partners. The Cu-ligand distances, determined by both X-ray diffraction and EXAFS, show that the AcoP metal centre seems to present both T1 and T1.5 features, in turn suggesting that AcoP might not fit well to the coupled distortion model. The crystal structures of two AcoP mutants confirm that the active centre of AcoP is highly constrained. Comparative analysis with other cupredoxins of known structures, suggests that in AcoP the second coordination sphere might be an important determinant of active centre rigidity due to the presence of an extensive hydrogen bond network. Finally, we show that other cupredoxins do not perfectly follow the coupled distortion model as well, raising the suspicion that further alternative models to describe copper centre geometries need to be developed, while the importance of rack-induced contributions should not be underestimated.

Crystal-to-crystal polymerisation of monosubstituted [PW11O39Cu(H2O)]5- Keggin-type anions.

The reaction between neutral bis(picolinate)copper(II) complexes and copper(II)-monosubstituted Keggin-type phosphotungstate anions formed in situ leads to the formation of the hybrid [C(NH2)3]10[{PW11O39Cu(H2O)}2{Cu(pic)2}]·10H2O compound (1, pic = picolinate) in the presence of structure-directing guanidinium cations. Single-crystal X-ray diffraction studies demonstrate that 1 contains dimeric {PW11O39Cu(H2O)}2{Cu(pic)2} molecular species constituted by two Keggin-type anions linked by one {Cu(pic)2} octahedral complex through axial coordination to their terminal oxygen atoms. The extensive hydrogen-bonding network established by guanidium cations and Keggin clusters plays a key role in retaining the crystallinity of the system throughout dehydration to allow a single-crystal-to-single-crystal (SCSC) transformation into the anhydrous [C(NH2)3]10[{PW11O39Cu}2{Cu(pic)2}] (2a) at 170 °C. Structural modifications involve the re-orientation, shifting in ca. 1.5 Å and condensation of all the {PW11O39Cu} units to result in {PW11O39Cu}n chains in an unprecedented solid-state polymerisation. This phase transition also implies the cleavage of Cu-O bonds induced by the rotation and translation of Keggin-type anions, in such a way that hybrid dimeric units in 1 are dismantled and {Cu(pic)2} complexes become square planar. The irreversibility of the phase transition has been confirmed by combined thermal and diffractometric analyses, which evidence that the anhydrous phase adsorbs only one water molecule per cluster to become the [C(NH2)3]10[{PW11O39Cu}2{Cu(pic)2}]·2H2O (2h) hydrated derivative without any significant alteration in its cell parameters, nor in its crystalline structure. Phase transformations have been monitored by electron paramagnetic resonance spectroscopy.

Flexible, transparent, and sustainable cellulose-based films for organic solar cell substrates.

Cellulose, often considered a highly promising substitute for petroleum-based plastics, offers several compelling advantages, including abundant availability, cost-effectiveness, environmental friendliness, and biodegradability. However, its inherent highly crystalline structure and extensive hydrogen-bonded network pose challenges for processing and recycling. In this study, we introduce the concept of cellulose vitrimers (CVs), wherein dynamic bonds are incorporated to reconfigure the hydrogen-bonded network, resulting in a mechanically robust, highly transparent material. CVs exhibit exceptional malleability, thermal stability, and noteworthy resistance to water and solvents. Due to the dynamic bond disassociation, CVs can be effectively chemically recycled using a well-established "dissolution-and-reforming" process. Moreover, CVs have proven successful as flexible substrate materials for organic solar cells, outperforming traditional petroleum-based polyethylene naphthalate (PEN). Given these advantages, CVs have the potential to replace conventional petroleum-based materials as recyclable and environmentally friendly alternatives, particularly within the realm of electronic devices and displays.

From waste to value: Characterization of recycled cellulose acetate for sustainable waste management

Cellulose acetate (CA) is a versatile polymer with various industrial applications, but its recycling process is still far from diffuse adoption. In this study, the purification of CA was confirmed through FTIR analysis, which exhibited characteristic peaks corresponding to cellulose molecules and acetylation. The rheological behavior of regenerated CA demonstrated shear thinning properties, making it suitable for applications requiring viscosity reduction under shear. Oscillation strain and frequency sweep tests revealed the formation of a gel-like network structure in CA solutions due to extensive hydrogen-bonding networks between water and acetone. The evaporation kinetics of acetone from CA films were found to be temperature and thickness-dependent, exhibiting both Fickian and non-Fickian diffusion mechanisms. The diffusion coefficient of acetone in CA films was determined and correlated with film porosity. Mechanical testing indicated comparable strain at rupture and ultimate strength between recycled and commercial CA, while a limited reduction was observed for the elastic modulus. These findings suggest potential applications of recycled CA in packaging and textile sectors, highlighting the importance of further research in optimizing its properties for specific industry requirements.

Design, Synthesis, Computational and Biological Evaluation of Novel Structure Fragments Based on Lithocholic Acid (LCA).

The regulation of bile acid pathways has become a particularly promising therapeutic strategy for a variety of metabolic disorders, cancers, and diseases. However, the hydrophobicity of bile acids has been an obstacle to clinical efficacy due to off-target effects from rapid drug absorption. In this report, we explored a novel strategy to design new structure fragments based on lithocholic acid (LCA) with improved hydrophilicity by introducing a polar "oxygen atom" into the side chain of LCA, then (i) either retaining the carboxylic acid group or replacing the carboxylic acid group with (ii) a diol group or (iii) a vinyl group. These novel fragments were evaluated using luciferase-based reporter assays and the MTS assay. Compared to LCA, the result revealed that the two lead compounds 1a-1b were well tolerated in vitro, maintaining similar potency and efficacy to LCA. The MTS assay results indicated that cell viability was not affected by dose dependence (under 25 µM). Additionally, computational model analysis demonstrated that compounds 1a-1b formed more extensive hydrogen bond networks with Takeda G protein-coupled receptor 5 (TGR5) than LCA. This strategy displayed a potential approach to explore the development of novel endogenous bile acids fragments. Further evaluation on the biological activities of the two lead compounds is ongoing.